Scribd
Upload
55 views

Guidelines ForUG Seminar

The document provides guidelines for preparing a B. Tech seminar, including selecting an approved topic, gaining faculty approval, thoroughly studying the topic, preparing slides with key elements like objectives and conclusions adhering to formatting guidelines, submitting an abstract for approval, and submitting a draft report before presenting. Formatting guidelines are provided for slides, equations, references, and abstract within specified limits. Standard IEEE formats are provided for references and journals.

Uploaded by

inderjit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Guidelines ForUG Seminar

The document provides guidelines for preparing a B. Tech seminar, including selecting an approved topic, gaining faculty approval, thoroughly studying the topic, preparing slides with key elements like objectives and conclusions adhering to formatting guidelines, submitting an abstract for approval, and submitting a draft report before presenting. Formatting guidelines are provided for slides, equations, references, and abstract within specified limits. Standard IEEE formats are provided for references and journals.

Uploaded by

inderjit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Guidelines for preparing B.

Tech Seminar
1. Selection of topic/area
Select a paper according to the specialisation of students. Papers from any other
approved journals can also be selected.
2. Approval to the selected topic
After selecting the paper, get approval from the concerned faculty in charge.
3. Study of topic
Students are requested to acquire a thorough knowledge on the subject by referring
back papers and reference books (These may be included as references at the end of
the paper) on the corresponding area.
4. Preparation of slides for presentation
Slides may be presented in MS power point. Time allowed for presentation is 20
minutes for presentation and 5 minutes for discussions. So, number of slides may be
around 20 - 25 to adhere the time limit.
5. Organisation of slides
a. The first slide will be a title page showing the title, name of author (presenter),
roll no. and Class.
b. 2nd page will contain overview of the seminar
c. Successive pages will contain
a. Objectives of the paper
b. Introduction
c. Body of the paper includes system dynamics, methodology, graphs, block
diagrams etc. arranged in a logical sequence depending on the problem.
d. Results and discussions
e. Conclusion
d. Last page will contain references and bibliography. References must be
presented in IEEE format, which is given as Annexure 2.
6. Each slide consists of 4 or 5 lines with enough space between lines.
7. All equations must be typed using equation editor (available with MS office/other
office suite)
8. Each slide will have a title and each figure have a caption.
9. An abstract of the work (seminar) is to be circulated among the faculty and fellow
students before presentation of the seminar. The abstract is prepared as follows.
The seminar abstract is an important record of the coverage of topic and provides a
valuable source of leading references for students and faculty alike. Accordingly, the
abstract must serve as an introduction to your seminar topic. It will include the key
hypotheses, the major scientific findings and a brief conclusion. The abstract will be
limited to 500 words, excluding figures and tables. The abstract must contain
references to the research articles upon which the seminar is based as well as
research articles that have served as key background material. The references should
be listed using a standard format (IEEE format given in App. 1). The abstract must be
submitted to the faculty in charge and get approval before the presentation.

10. Draft copy of the Seminar report should also be submitted before the presentation

Thiruvananthapuram HOD
26.06.2012 Dept. of Electrical Engineering,
JCMCSIIT
Annexure. 1, IEEE Journals & Transactions

Aerospace and Electronic Systems, IEEE Transactions on


Applied Superconductivity, IEEE Transactions on
Automatic Control, IEEE Transactions on
Automation Science and Engineering, IEEE Transactions on
Biomedical Circuits and Systems, IEEE Transactions on
Biomedical Engineering, IEEE Transactions on
Communications, IEEE Transactions on
Components, Packaging and Manufacturing Technology, IEEE Transactions on
Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on
Consumer Electronics, IEEE Transactions on
Control Systems Technology, IEEE Transactions on
Dielectrics and Electrical Insulation, IEEE Transactions on
Electrical and Computer Engineering, Canadian Journal of
Electromagnetic Compatibility, IEEE Transactions on
Energy Conversion, IEEE Transactions on
Engineering Management, IEEE Transactions on
Evolutionary Computation, IEEE Transactions on
Fuzzy Systems, IEEE Transactions on
Industrial Electronics, IEEE Transactions on
Industry Applications, IEEE Transactions on
Instrumentation and Measurement, IEEE Transactions on
Intelligent Transportation Systems, IEEE Transactions on
Magnetics, IEEE Transactions on
Micro-electro-mechanical Systems, Journal of
Nanotechnology, IEEE Transactions on
Neural Networks, IEEE Transactions on
Pattern Analysis and Machine Intelligence, IEEE Transactions on
Power Electronics, IEEE Transactions on
Power Systems, IEEE Transactions on
Robotics, IEEE Transactions on
Sensors Journal, IEEE
Signal Processing, IEEE Transactions on
Smart Grid, IEEE Transactions on Software Engineering, IEEE Transactions on
Solid-State Circuits, IEEE Journal of
Systems, Man and Cybernetics, IEEE Transactions on
Journal of guidance, control and dynamics
Journal of space crafts and rockets
Journal of American helicopter society
Journal of Aircrafts
AIAA journal
International journal of robotics
International journal of navigation, guidance and control
International journal of robotics and automation
Annexure 2. References

[1] Paresh C. Sen, Chandra S. Namuduri and Pradeep K. Nandam, Evolution of control
techniques for industrial drives, Proceedings of the Power Electronics, Drives and Energy
Systems Conference (PEDES-96), New Delhi, India, January 1996, pp. 869-875.
[2] Boldea and S. A. Nasar, Vector Control of ac Drives, CRC Press, USA, 1992.
[3] M. A. El-Sharkawi et al., High performance drive of brushless motors using neural
networks, IEEE Transactions on Energy Conversion, vol. 9, no. 2, June 1994, pp. 317-322.
[4] Key Hameyer and Ronnie J. M. Belmans, Permanent magnet excited brushed dc motors,
IEEE Transactions on Industrial Electronics, vol. 43, no. 2, April 1996, pp. 247-255.
[6] Teck-Seng Low, M. A. Jabbar and M. A. Rahuman, Permanent magnet motors for brushless
operation, IEEE Transactions on Industrial Applications, vol. 26, no.1, January/February
1990, pp. 124-129.
[7] Ahmed Rubaai and Raj C. Yalamanchili, Dynamic study of an electronically brushless dc
machine via computer simulations, IEEE Transactions on Energy Conversion, vol. 7, no. 1,
March 1992, pp. 132-138.
[8] Gordon R. Slemon, On the design of high performance surface mounted permanent magnet
motors, IEEE Transactions on Industrial Applications, vol. 30, no. 1, January/February 1994,
pp. 135-140.
[9] Nabeel. A. O, Demerdash and Mohd. A. Alhamadi, Three dimensional finite element
analysis of permanent magnet brushless dc motor drives - status of the state of the art, IEEE
Transactions on Industrial Electronics, vol. 43, no. 2, April 1996, pp. 268-275.
[10] L. Zong, M. F. Rehman, W. Y. Hu and K. W. Lim, Analysis of direct-torque control in
permanent magnet synchronous motor drives, IEEE Transactions on Power Electronics, vol.
12, no. 3, May 1997, pp. 528-532.
[11] W. K. Ho et al., Performance and gain and phase margins of well known PID tuning
formulas, IEEE Transactions on Control Systems Technology, vol. 4, no. 4, July 1996, pp. 473-
477.
[12] Qing-Guo Wang et al., PID tuning for improved performance, IEEE Transactions on Control
Systems Technology, vol. 7, no. 4, July 1999, pp. 457-465.

You might also like