Scribd
Upload
172 views3 pages

LH AD Catálogo

Especificação de válvula Corta-chama Protego

Uploaded by

Alan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views3 pages

LH AD Catálogo

Especificação de válvula Corta-chama Protego

Uploaded by

Alan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Deflagration Flame Arrester, End-of-Line

PROTEGO LH/AD

FM Approvals
Specification Tested
b

a
2

c
DN

Function and Description Special Features and Advantages


The PROTEGO LH/AD end-of-line deflagration flame arrester

weather hood provides protection against environmental
provides protection against flame transmission through atmo- impact (harsh weather conditions, bird nests, etc.)
spheric deflagration. The device is typically installed on vent
available in sizes DN 50 (2) up to DN 800 (32)
lines of vessels and process engineering apparatus which are
not pressurized. For safe application it is important that an endur- easy maintenance
ance burning situation can be excluded, so typically it is installed
available for elevated operating temperatures
on vent lines which discharge vapour for a short time period
only. The device prevents flame transmission from atmospheric protection against atmospheric deflagration
deflagration into the vessel or plant. low operating and lifecycle cost
The PROTEGO LH/AD consists of a housing (1), a weath- cost effective device
er hood (2) and the PROTEGO flame arrester unit (3).
The device is equipped with a metal weather hood. A pro- cost effective spare parts
tection screen is installed between the weather hood and
the housing to keep animals out. The FLAMEFILTER
(4) gap size will depend on the devices intended use. De-
tailing the operating conditions such as the tempera- Design Type and Specification
ture, explosion group and the composition of the fluid,
enables PROTEGO to select the best end-of-line deflagration End-of-line deflagration flame arrester, basic design LH/AD
flame arrester for your application. The PROTEGO LH/AD se-
Special designs available on request
ries end-of-line deflagration flame arrester is available for sub-
stances from explosion groups IIA to IIC (NEC groups D to B).
The standard design can be used with operating temperature
of up to +60C / 140F. Devices with special approval can be
obtained for higher temperatures upon request.
Type-approved according to ATEX Directive 94/9/EC and
EN ISO 16852 as well as other international standards.

All rights and alterations reserved acc. ISO 16016 - Active data sheet at www.protego.de
68 KA / 2 / 0414 / GB
Table 1: Dimensions Dimensions in mm / inches

To select the nominal size (DN), please use the flow capacity charts on the following pages

IIB3 IIC
DN a b
c* c*
50 / 2" 100 / 3.94 200 / 7.87 170 / 6.69 185 / 7.28
80 / 3" 150 / 5.91 240 / 9.45 180 / 7.09 195 / 7.68
100 / 4" 200 / 7.87 295 / 11.61 220 / 8.66 235 / 9.25
150 / 6" 300 / 11.81 550 / 21.65 260 / 10.24 270 / 10.63
200 / 8" 300 / 11.81 550 / 21.65 260 / 10.24 270 / 10.63
250 / 10" 400 / 15.75 600 / 23.62 355 / 13.98 365 / 14.37
300 / 12" 400 / 15.75 600 / 23.62 340 / 13.39 350 / 13.78
350 / 14" 600 / 23.62 800 / 31.50 390 / 15.35 400 / 15.75
400 / 16" 600 / 23.62 800 / 31.50 380 / 14.96 390 / 15.35
500 / 20" 700 / 27.56 1000 / 39.37 400 / 15.75 410 / 16.14
600 / 24" 800 / 31.50 1200 / 47.24 475 / 18.70 485 / 19.09
700 / 28" 1000 / 39.37 1400 / 55.12 505 / 19.88 515 / 20.28
800 / 32" 1200 / 47.24 1600 / 62.99 550 / 21.65 560 / 22.05
* c are reference values. Exact measures depend on the flange connection.

Table 2: Selection of explosion group


MESG Expl. Gr. (IEC/CEN) Gas Group (NEC)
0,65 mm IIB3 C Special approvals upon request
< 0,5 mm IIC B

Table 3: Specification of max. operating temperature


60C / 140F higher operating temperatures upon request
T60 Tmaximum allowable operating temperature in C

Table 4: Material selection fpr housing


Design A B
Housing Steel Stainless Steel
Weather hood Stainless Steel Stainless Steel Special materials upon request
Protection screen Stainless Steel Stainless Steel
Flame arrester unit A, B B

Table 5: Material combinations of flame arrester unit


Design A B
FLAMEFILTER cage
Steel Stainless Steel Special materials upon request
FLAMEFILTER
Stainless Steel Stainless Steel

Table 6: Flange connection type


EN 1092-1, Form B1 or DIN 2501, Form C, PN 16; from DN 200 PN 10 EN or DIN
other types upon request
ANSI 150 lbs RFSF ANSI

for safety and environment

KA / 2 / 0414 / GB 69
Deflagration Flame Arrester, End-of-Line
Flow Capacity Charts

PROTEGO LH/AD

FM Approvals
pp
Specifi
cification Tested

airflow in thousands of CFH

pressure drop p - inch W.C.


LH/AD-IIB3
pressure drop p (mbar)

.
flow rate V (m/h) 1608-L

airflow in thousands of CFH

pressure drop p - inch W.C.

LH/AD-IIC
pressure drop p (mbar)

.
flow rate V (m/h) 1690-L

The flow capacity charts have been determined with a calibrated and TV certified flow capacity test rig.
.
Volume flow V in (m/h) and CFH refer to the standard reference conditions of air ISO 6358 (20C, 1bar).
Conversion to other densities and temperatures refer to Vol. 1: Technical Fundamentals.

All rights and alterations reserved acc. ISO 16016 - Active data sheet at www.protego.de
70 KA / 2 / 0414 / GB

You might also like