Function Generator: Gfg-8217A (3Mhz) Gfg-8219A (3Mhz)
This document summarizes the specifications and features of two function generator models, the GFG-8219A and GFG-8217A. Both generators have a frequency range of 0.3Hz to 3MHz and can generate common waveforms like sine, triangle, square and ramp waves. The GFG-8219A adds features like external voltage controlled frequency, amplitude modulation, and frequency modulation. Key specifications for both models include high resolution 6-digit LED displays, variable attenuators, and low distortion sine waves.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
65 views1 page
Function Generator: Gfg-8217A (3Mhz) Gfg-8219A (3Mhz)
This document summarizes the specifications and features of two function generator models, the GFG-8219A and GFG-8217A. Both generators have a frequency range of 0.3Hz to 3MHz and can generate common waveforms like sine, triangle, square and ramp waves. The GFG-8219A adds features like external voltage controlled frequency, amplitude modulation, and frequency modulation. Key specifications for both models include high resolution 6-digit LED displays, variable attenuators, and low distortion sine waves.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1
B11
Function Generator
GFG-8219A (3MHz) GFG-8217A (3MHz)
FEATURES
* Frequency Range: 0.3Hz ~ 3MHz * Two-Step (-20dBx2) and Variable Attenuator
* Waveforms: Sine, Triangle, Square, Ramp, TTL and * Built-In 6 Digit Counter with INT/EXT Function Up to 150MHz CMOS Output /High Resolution * External Voltage Controlled Frequency (VCF) Function * LIN/LOG Sweep Mode * Duty Cycle Control with Signal Inversion Capability * INT/EXT AM/FM Modulation(GFG-8019A) * GCV Output for Synchronization(GFG-8019A) * Variable DC Offset Control
SPECIFICATIONS FREQUENCY MODULATION (FOR GFG-8219A ONLY)
MAIN Deviation 0 ~+ _ 5% Frequency Range MOD. Frequency 400Hz(INT), DC ~ 20kHz(EXT.) 0.3Hz ~ 3MHz (7 Range) Amplitude > 10Vpp (into 50W load) EXT. Sensitivity < _ 10Vpp for 10% modulation Impedance 50W +_ 10% FREQUENCY COUNTER Attenuator -20dB _ + 1dBx2 INT./EXT. Switch selector DC Offset <-5V ~ >5V (into 50W load) Range 0.3Hz ~ 3MHz (5Hz ~ 150MHz EXT.) Duty Control 80% : 20% : 80% to 1MHz Continue variable Accuracy Time base accuracy +_ 1 count Display 6 digit LED display Time Base _ 20ppm (23 C + + _ 5 C) after 30 minutes warm up SINE WAVE Resolution The maximum resolution is 100nHz for 1Hz and Distortion _ 1%, 0.3Hz ~ 200kHz < 1Hz for 100MHz Flatness < 0.3dB, 0.3Hz ~ 300kHz Input Impedance 1MW // 150pF < 0.5dB, 300kHz ~ 3MHz Sensitivity _ 35mVrms (5Hz ~ 100MHz), < _ 45mVrms (100MHz ~ 150MHz) < TRIANGLE WAVE Linear > 98%, 0.3Hz ~ 100kHz _ POWER SOURCE _ 95%, 100kHz ~ 3MHz > AC115V/230V + _ 15%, 50 / 60Hz SQUARE WAVE ACCESSORIES Symmetry + 2%, 0.3Hz ~ 100kHz _ Instruction manual x 1, Power cord x 1, GTL-101 x 2 Rise or Fall Time _ 100nS at maximum output (into 50W load) < DIMENSIONS & WEIGHT CMOS OUTPUT 251(W) x 91(H) x 291(D)mm, Approx. 2.2kg Level _ 1Vpp ~ 14.5Vpp + 4Vpp + _ 0.5Vpp adjustable Rise or Fall Time _ 120nS < TTL OUTPUT ORDERING INFORMATION Level _ > 3Vpp GFG-8219A 3MHz Function Generator Fan Out 20 TTL load with GCV Function, AM/FM Modulation Rise or Fall Time _ 25nS < GFG-8217A 3MHz Function Generator VCF Input Voltage 0V ~ 10V +_ 1V (100 : 1) Input Impedance 10kW +_ 10% GCV(FOR GFG-8219A ONLY) Output Voltage To set the voltage between 0V ~ 2V as per different frequency SWEEP OPERATION Sweep/Manual Switch selector Sweep/Rate 100 : 1 ratio max. and adjustable Sweep/Time 0.5sec. ~ 30sec. adjustable Sweep/Mode Lin./Log. switch selector AMPLITUDE MODULATION (FOR GFG-8219A ONLY) Depth 0 ~ 100% MOD. Frequency 400Hz (INT), DC ~ 1MHz(EXT.) Carrier BW 100Hz ~ 3MHz (-3dB) EXT Sensitivity _ 10Vpp for 100% modulation <