Scribd
Upload
55 views2 pages

Questionnaire 1p STD Fluids

This document contains a questionnaire to collect information about the primary and secondary sides of a heat exchanger system. It requests details such as the name and properties of fluids, flow rates, inlet/outlet temperatures, pressure drops, operating pressures, fluid compositions, suspended solids data, materials of construction, design temperatures and pressures, and hydrotesting requirements. The questionnaire aims to gather essential specifications to design and engineer a heat exchanger for the user's application.

Uploaded by

kshitij
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
55 views2 pages

Questionnaire 1p STD Fluids

This document contains a questionnaire to collect information about the primary and secondary sides of a heat exchanger system. It requests details such as the name and properties of fluids, flow rates, inlet/outlet temperatures, pressure drops, operating pressures, fluid compositions, suspended solids data, materials of construction, design temperatures and pressures, and hydrotesting requirements. The questionnaire aims to gather essential specifications to design and engineer a heat exchanger for the user's application.

Uploaded by

kshitij
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

QUESTIONNAIRE ONE PHASE

1. Primary Side

a. Name of the Fluid :

b. Fluid Concentration( if the fluid has more than one component

c. Flowrate (Kg/Hr) :

d. Inlet temperature (Deg.C) :

e. Outlet temperature (Deg.C) :

f. Allowable Pressure Drop. (MWC) :

g. Operating Pressure (Kg/cm2 [g]) / Vacuum :

2. Secondary Side

a. Name of the Fluid concentration ( if more than one component)

b. Flowrate (Kg/Hr) :

c. Inlet temperature (Deg.C) :

d. Outlet temperature (Deg.C) :

e. Allowable Pressure Drop. (MWC) :

f. Operating Pressure (Kg/cm2 [g]) / Vacuum :

Additional Information

a. Fluid composition / Concentration of components ( cold )


Fluid composition / concentration of components ( hot )

b. Suspended solids % , if any , and max. particle size, abrasiveness:

c. Data on type , HTA & construction of equipment currently being used for
the duty.

d. MOC contact parts & gaskets ( for GPHEs)

e. MOC non contact parts/frame ( SS cladded CS OR Painted CS):

f. Design temperature Deg C


g. Design Pressure Kg/cm2

h. PHE shall be hydro tested for 1.3 times design pressure, user to confirm
acceptance.

Note : For heating medium Saturated Steam , user to specify steam pressure
Bar g.

You might also like