Scribd
Upload
752 views2 pages

Curved Beam

This document provides information for designing a curved concrete beam, including material strengths, beam dimensions, loading details, and flexural design calculations. The beam has a radius of 1350mm and is 1.41m long. It is designed to support a total factored load of 84.8kN/m using 4 bars of 25mm diameter, which results in stresses within allowable limits. A table provides correction factors "K" for calculating moments in curved beams of different radii and cross-sections.

Uploaded by

لازلت احلم
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
752 views2 pages

Curved Beam

This document provides information for designing a curved concrete beam, including material strengths, beam dimensions, loading details, and flexural design calculations. The beam has a radius of 1350mm and is 1.41m long. It is designed to support a total factored load of 84.8kN/m using 4 bars of 25mm diameter, which results in stresses within allowable limits. A table provides correction factors "K" for calculating moments in curved beams of different radii and cross-sections.

Uploaded by

لازلت احلم
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Project

Subject
YOUR COMPANY LOGO Designed by
Checked by

CURVED BEAM DESIGN

Compresive strength of concrete f'c 28 Mpa


Steel yeild strength f'y 410 Mpa
Width of beam b 400 mm
Depth of beam d 600 mm

2700
Angle 30 deg
Beam span length L 1.41 m
Concrete cover c 40 mm 400
Effective depth de 560 mm 400
Slab thickness t 150 mm
Wall thickness t 150 mm

600
Wall height H 1 m
Line 'b' length 2700 mm
Radius for curve r 1350 mm
Distance from center to inner fiber s 2500 mm
Distance from centroidal axis to inner fiber c 200 mm b s
Radius of curvature of centroidal axis R 2700 mm
r

MEMBER LOADING
DEAD LOAD
Slab load 3.75 KN/m2
Superimposed dead load 2 KN/m2
Partition load 1 KN/m2
Finishes 2.5 KN/m2 Tributary length 4.00 m
Wall load 3 KN/m
Beam self weight 6 KN/m
Point load (if any) 0 KN
Total dead load 46
Point load (if any)
LIVE LOAD
Superimposed live load 3 KN/m2
Point load (if any) 0 KN
Factored load/unit length 84.8 KN/m
Factored point load 0 KN
FLEXURE DESIGN
K value Ratio 14
Cross section Circle
Loading 119.88 KN
Moment 323.68 KN-m
Reinforcement Ast 1734 mm2
Min reinforcement Ast(min) 723 mm2
Bars provided 4 dia 25
Stress at inner edge (compression) 14.43 Mpa
Stress at outer edge (tension) 12.68 Mpa
Cross section CORRECTION FACTOR "K" FOR CURVED BEAMS

Ratio Circle or Ellipse Rectangle Other sections


R/c Inside Outside Inside Outside Inside Outside
1.2 3.41 0.54 2.89 0.57
1.4 2.40 0.60 2.13 0.63
1.6 1.96 0.65 1.79 0.67
1.8 1.75 0.68 1.63 0.70 - -
2.0 1.62 0.71 1.52 0.73 1.63 0.74
3.0 1.33 0.79 1.30 0.81 1.36 0.81
4.0 1.23 0.84 1.20 0.85 1.25 0.86
6.0 1.14 0.89 1.12 0.90 1.16 0.90
8.0 1.10 0.91 1.09 0.92 1.12 0.93
10.0 1.08 0.93 1.07 0.94 1.10 0.94
20.0 1.03 0.97 1.04 0.96 1.05 0.95

13.6 Err:522 Err:522


13.50 Err:522 Err:522
13.4 Err:522

You might also like