Pile Design Check (REV 2) BLB2 Berthing Dolphin Piles 19-Oct-09

Input Geometry & Pile Diameter 457 mm ULS LCF Head Mid Ht. Base
Materials Wall Thickness 12.7 mm M*px 1.5 0 0 0 kNm
Head Pull
Corrosion Allowance 4 mm Moments M*py 1.5 0 0 0 kNm
Head Level (CD) 3 mCD
Bed Level (CD) (Fixity) -4.5 mCD M*vx 1 0 2 2 kNm
Verticality
Overdredge Tolerance 0 m Moments M*vy 1 0 2 1 kNm
Fractured Zone 0 m
Embedment Length (Fixity) 0 * Dia M*ex 1 53 27 0 kNm
Eccentricity
Verticality Tolerance x 100 mm Moments M*ey 1 53 27 0 kNm
Verticality Tolerance y 100 mm
Camber at mid height 5.0 mm
Inservice Drift at Head x 10 mm Head Mid Ht. Base
Inservice Drift at Head y 10 mm Design Actions Axial N* 1050 0 1050 kN
Bearing Eccentricity x 50 mm (ULS) Moment M*x 53 29 128 kNm
Bearing Eccentricity y 50 mm Moment M*y 103 29 102 kNm
Head Pull Distance x 0 mm
Head Pull Distance y 0 mm
Head Long x Stiffness 37313 kN/m Bending Pile Wall Slenderness 72.3 ratio
Head Lateral y Stiffness 37313 kN/m Capacity Check If Compact No
Effective Length Factor 2 ratio Check Pile Wall Slenderness OK
Yield Strength Fy 350 Mpa Effective Section Modulus Ze 1.537E+06 mm3
Modulus of Elasticity E 200000 Mpa Mux & Muy 484 kNm
Plastic Slenderness Limit 42 ratio
Elastic Slenderness Limit 120 ratio Max Pile Diameter 509.6 mm
Compression Yield Limit 82 ratio Axial Capacity Check Pile Diameter (kf=1) OK
Member Section Constant (b) -0.5 kf=1 Modified Member Slenderness n 114.0 ratio
Compression Member Factor a 15.87
Head Mid Ht. Base Combined Slenderness 106.1
Input Actions Axial N* 1050 0 1050 kN Imperfection Factor 0.3017
(ULS) Moment M*x 0 0 126 kNm Factor Epsilom 0.9687
Moment M*y 50 0 100 kNm Slenderness Reduction Factor c 0.5015
Nc 1901 kN
Length Total Length Lt 7.5 m Ns 3791 kN
Effective Length Le 15.00 m
Head Mid Ht. Base
Effective Diameter De 449 mm Mix 217 484 217 kNm
Section In Plane
Properties Inside Diameter Di 431.6 mm Capacity Miy 217 484 217 kNm
Effective Area Ae 12034 mm2
Effective Second Moment of Area Ixe 2.917E+08 mm4 Section Capacity 0.33 0.08 0.47 <1 is OK
Compression and
Gross Second Moment of Area Ixg 4.378E+08 mm4 uniaxial bending Member Capacity 0.53 0.08 0.75 <1 is OK
Radius of Gyration rx 155.7 mm
Elastic Modulus Zx 1.300E+06 mm3 Section Capacity 0.60 0.12 0.75 <1 is OK
Plastic Modulus Sx Capacity
1.687E+06 mm3 Interaction Member Capacity 0.49 0.04 0.82 <1 is OK
Cantilever Head Stiffness 622.6 kN/m Checks Member Unity 0.87 0.12 1.03 Not crit
No. Load Case Actions at Head Action at Mid Height Action at Base
N My Mx N My Mx N My Mx

1 Dead Load 518 0 0 650 0 0 782 0 0

2 Roadway 418 0 0 418 0 0 418 0 0
3 Conveyor DL 89 0 0 89 0 0 89 0 0
4 Conveyor LL 98 0 0 98 0 0 98 0 0
5 Earthquake Z 12 66 2 12 51 2 12 181 2
6 Cyclone Z 90 0 0 90 218 7 90 436 14
7 Thermal +45 188 0 0 188 16 130 188 32 260
8 Thermal -30 -126 0 0 -126 10 87 -126 20 173
9 NB Wave Z -6 0 1 -6 190 1 -6 161 1
10 SL702 Max Seaward 8006 0 0 8006 24 17 8006 48 34
C1 LT Obstructed 9497 0 1 9656 140 96 9814 170 191

OP Operating No SL 1344 0 0 1511 58 36 1677 115 71

OPS Operating LT Obs 9350 0 0 9517 82 53 9683 163 105