edm10890_ch12_534-585.

indd Page 534 7/24/10 11:38 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com

CHAPTER 12

Job-Order, Process, and

Hybrid Costing Systems

LEARNING OBJECTIVES
After you have mastered the material in this chapter you will be able to:
1 Distinguish between job-order and process costing systems.
2 Identify documentation used in a job-order costing system.
3 Explain how events in a job-order costing system affect financial statements.
4 Explain how events in a process costing system affect financial statements.
5 Calculate equivalent units and prepare a cost of production report.

CHAPTER OPENING
Benchmore Boat Company built five boats during the current year. Each boat has unique characteristics that affect
its cost. For example, an 80-foot yacht required more labor and materials than a 30-foot sailboat. Because different
boats cost different amounts, Benchmore needs a cost system that traces product costs to individual inventory
items (specific boats).
In contrast, Janis Juice Company produced 500,000 cans of apple juice during the same year. Each can of
juice is identical to the others. Determining the cost of a boat built by Benchmore requires a different costing
system than the system Janis needs to determine the cost of a can of juice. Benchmore needs a costing
system that captures the unique cost of each individual inventory item. Janis needs a costing system that
distributes costs evenly across total production (number of cans of juice produced during an accounting
period).

534
edm10890_ch12_534-585.indd Page 535 7/27/10 5:38 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com

The Curious Accountant

Consider the following two situations:

First, imagine you worked at Kelloggs, a company
that produces breakfast cereals. Assume that during
the past year your company produced 70 million,
24-ounce boxes of Corn Flakes, and incurred manufac-
turing costs of $115 million related to this one product.
Next, imagine you worked for Bechtel, a private company that is one of the worlds largest construction com-
panies. During 2009 it was constructing such diverse projects as a plant to produce liquefied natural gas(LNG)
inAngola, off the coast of West Africa, and a plant in Hanford, Washington, to treat nuclear waste materials.
Assume that during 2009 Bechtel worked on 40 different projects and incurred manufacturing costs of $20 billion.
How would you determine the cost of one box of cereal? How would you determine the cost incurred to
construct the LNG project in Angola? Which of the two questions asked above do you think would be the most
difficult to answer for real world companies? (Answers on page 552.)

535
edm10890_ch12_534-585.indd Page 536 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
536 Chapter 12

COSTING SYSTEMS
The type of product a company produces affects the type of accounting system needed
LO 1 to determine product cost. The two most common types of costing systems are job-
order costing and process costing. Some companies use hybrid costing systems that
Distinguish between job-order and combine features of both job-order and process systems. The following section of the
process costing systems. text discusses the types of products most suited to each costing system and the account-
ing procedures used in each type of costing system.

Costing Systems and Type of Product

Job-order costing systems accumulate costs by individual products. The boats
Benchmore builds are suited to job-order costing. Other products for which job-order
costing is suitable include movies made by Walt Disney Productions,
office buildings constructed by Rust Engineering, and airplanes made by
Boeing. Job-order costing systems apply not only to individual inventory
items but also to batches of inventory items. For example, Hernandes
Shirt Company may account for producing a special order of 20,000
shirts sold to the United States Army as a single job. Companies use
job-order costing systems when they need to know the costs of individual
products or batches of products.
Process costing systems allocate costs evenly to homogeneous prod-
ucts. In addition to beverage companies such as Janis Juice, oil refiners
such as Texaco, chemical producers such as Dow Chemical, food pro-
cessors such as General Mills, and paint manufacturers such as Sherwin-
Williams use process costing. These companies normally make products in
mass quantities using continuous processes. The per-unit product cost is
determined by dividing the total product cost by the number of units
produced during the accounting period. Process costing systems provide
average product costs.
To a lesser extent, job-order costing systems also use average costs. It is
either not possible or not cost effective to trace costs of indirect materials,
indirect labor, utilities, rent, and depreciation directly to particular jobs.
Companies normally combine these costs and allocate them to individual
products using an average overhead rate based on a common measure of
production such as labor hours, machine hours, or square footage. When
jobs are produced in batches of a number of similar products, the cost per
unit is determined by dividing the total cost of the job by the number of units in the
batch. Although more costs are traced to specific products under a job-order system than
a process system, both systems require some form of cost averaging.

Job-Order Cost Flow

Job-order and process costing systems are patterned after the physical flow of products
moving through production. For example, consider how Benchmore Boat Company
builds custom boats. Each boat is a separate project. Benchmore starts a project by
requisitioning raw materials from materials storage. It assigns specific employees to work
on specific boats. Finally, it assigns indirect (overhead) costs to each boat based on the
number of direct labor hours required to build the boat.
Benchmores job-order costing system accumulates cost in a manner parallel to
physical boat construction. Benchmore assigns each boat a specific job identification
number. It records transactions in inventory accounts on a perpetual basis. Product
costs are accumulated separately for each job identification number. The costs of each
boat move through the Work in Process Inventory account to the Finished Goods In-
ventory account and finally to the Cost of Goods Sold account as the boat is produced
and sold. Exhibit 12.1 shows the flow of product costs for the five boats Benchmore
plans to build in 2012. In a job-order system, the amount recorded in the Work in
Process Inventory account is the total cost to date of distinct jobs. Each distinct job
edm10890_ch12_534-585.indd Page 537 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 537

EXHIBIT 12.1
Cost Flow in a Job-Order Costing System

Balance sheet

Product Finished Income

Work in process inventory
costs goods inventory statement

Boat 101
Materials
Labor Cost of goods
Boat 104
Overhead available for
Materials
Labor sale maintained
Materials Overhead Boat 103 separately for
Cost of
Labor Materials
goods
Overhead Labor Boat 101
Boat 105 sold
Overhead Boat 102
Materials Boat 103
Labor Boat 104
Overhead Boat 102
Boat 105
Materials
Labor
Overhead

represents the costs of materials, labor, and overhead accumulated for that specific in-
ventory project. The Work in Process Inventory account is a control account supported
by numerous subsidiary accounts (the records for individual jobs). The Finished Goods
Inventory account is also a control account. It is supported by subsidiary accounts in
which are recorded the separate costs of each completed, but not yet sold, boat.

Process Cost Flow

Process costing systems use the same general ledger accounts as job-order costing systems.
Product costs flow from Raw Materials Inventory to Work in Process Inventory to
Finished Goods Inventory to Cost of Goods Sold. The primary difference between
the two systems centers on accounting for the work in process inventory. The physical
products move continuously through a series of processing centers. Instead of accu-
mulating product costs by jobs that add up to a single Work in Process Inventory
control account, process costing systems accumulate product costs by processing
centers, or departments. Each department has its own separate Work in Process Inven-
tory account. For example, Janis Juice Company uses three distinct processes to produce
cans of apple juice. Raw apples enter the extraction department where juice concentrate
is pressed from whole fruit. The concentrate moves to the mixing department where
Janis adds water, sugar, food coloring, and preservatives. The resulting juice mixture
moves to the packaging department where it is canned and boxed. The materials, labor,
and overhead costs incurred as products move through a processing center (depart-
ment) are charged to that centers Work in Process Inventory account.
Parallel to the physical flow of product through the manufacturing process, cost
accumulations pass from one department to the next. The end products of one depart-
ment become the raw materials of the next department. The costs transferred from one
department to the next are transferred-in costs. Transferred-in costs are combined with
the additional materials, labor, and overhead costs incurred by each succeeding depart-
ment. When goods are complete, the total product cost transferred to the Finished
Goods Inventory account represents the sum of product costs from all the departments.
Exhibit 12.2 illustrates cost flow for the process costing system used by Janis Juice
Company. Compare the cost flow patterns in Exhibits 12.1 and 12.2 to clarify the
distinction between job-order and process costing systems.
edm10890_ch12_534-585.indd Page 538 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
538 Chapter 12

EXHIBIT 12.2
Cost Flow in a Process Costing System

Balance sheet

Product WIP inventory WIP inventory WIP inventory Finished Income

costs extraction mixing packaging goods inventory statement

Materials
Transferred-in
Labor
costs
Overhead

Transferred-in
Materials Cost of
Materials costs Cost of
Labor goods
Labor goods
Overhead available
Overhead sold
for sale

Materials
Labor
Overhead

Hybrid Accounting Systems

Many companies use hybrid costing systems. Hybrid systems combine features of both
process and job-order costing systems. For example, Gateway 2000 makes thousands of
identical computers using a continuous assembly line that is compatible with process
costing. Each unit requires the same amount of labor to assemble a standard set of
parts into a finished computer ready for immediate sale. Gateway also builds custom
computers with unique features. Customers can order larger monitors, more memory,
or faster processors than Gateways standard model has. Gateway meets these requests
by customizing the computers as they move through production. The costs of custom-
ized features must be traced to products with a job-order type of system. Gateway
charges customers a premium for the custom items.

DOCUMENTATION IN A JOB-ORDER COSTING SYSTEM

In a job-order costing system, product costs for each individual job are accumulated on a
LO 2 job cost sheet, also called a job-order cost sheet or a job record. As each job moves
through production, detailed cost information for materials, labor, and overhead is re-
Identify documentation used in a corded on the job cost sheet. When a job is finished, the job cost sheet summarizes all
job-order costing system. costs incurred to complete that job.
Two primary source documents, materials requisition forms and work tickets, pro-
vide the information recorded on the job cost sheet. Before starting a job, the job super-
visor prepares a materials requisition form which lists the materials needed to begin
work. The materials requisition represents the authorization for raw materials to be re-
leased from storage to production. Some companies deliver hard-copy forms to and
from the different departments, but most modern businesses deliver requests electroni-
cally through a computer network. Whether recorded on paper documents or in elec-
tronic files, the information from material requisitions for each job is sent to the
accounting department to be summarized on the job cost sheet.
The work ticket, sometimes called a time card, provides space for the job number,
employee identification, and work description. Employees record on the work ticket the
amount of time they spend on each job. This information is forwarded to the account-
ing department. Using wage rate records, the accounting department computes the
edm10890_ch12_534-585.indd Page 539 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 539

EXHIBIT 12.3
Job-Order Cost Sheet and Source Documents

Job Cost Sheet

Boat 101
Job Order No. _________ Customer Name: ________________________________
Arturo Martinez
10 31 2011
Due Date: ___/___/_____ 08 01 2011
Date Started: ___/___/_____ 11 30 2011
Date Finished: ___/___/_____

Direct materials Direct labor Applied overhead

Req. No. Cost Ticket Hours Cost Rate Hours Cost
24585 7,100 367 1,400 9,100 3.90 1,400 5,460
24600 5,600 360 1,600 10,400 3.90 1,600 6,240
24609 6,100
Total 18,800 Total 19,500 Total 11,700
Cost summary

Direct materials $18,800

Direct labor 19,500
Overhead 11,700
Total $50,000

Material requisitions Work tickets

Date Quantity Date Hours
Package K 8/1 Mixed Process 1 9/30 1,400
Package R 9/1 Mixed Process 2 11/30 1,600
Package T 10/1 Mixed Information transferred
Information transferred electronically
electronically

amount of labor cost and records it on the job cost sheet. The data can be gathered
manually or electronically.
Finally, each job cost sheet provides space for applied overhead. Companies maintain
job cost sheet records perpetually, adding additional cost data as work on jobs progresses.
Using predetermined overhead rates, estimated overhead costs are regularly added to job
cost sheets. Exhibit 12.3 illustrates a job cost sheet along with materials requisition forms
and work tickets for Benchmore Boat Companys job-order number Boat 101.

REALITY BYTES
Job-order, process, and hybrid costing systems apply to service businesses as well as
manufacturing concerns. Consider a local franchisee of Lawn Doctor who is pricing lawn
maintenance contracts for a variety of residential customers. A separate price will be
quoted for each lawn, and this price will be based on what the company believes it will
cost to maintain that particular lawn. Some customers have larger lawns than others,
which cost more to service. Some customers want less lawn care service than others,
which costs less. This type of service business will use a job-order system.
Now, consider a company in the clothes laundering business. The price the company
charges to wash, press, and hang a mans shirt is the same for all shirts because the cost
of servicing each shirt, whether large or small, is about the same. This business will use
a process costing system to determine the cost of laundering one shirt.
However, to determine the cost of one specific customers job a hybrid system would be used, because different customers
bring in different numbers of shirts to be cleaned. While process costing is used to determine the cost to clean one shirt, job
order costing is used to calculate the cost of the entire job.
edm10890_ch12_534-585.indd Page 540 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
540 Chapter 12

JOB-ORDER COSTING SYSTEM ILLUSTRATED

To illustrate how a job-order costing system works, we follow the operations of Bench-
LO 3 more Boat Company during 2012. Exhibit 12.4 shows the companys 2012 beginning
account balances.
Explain how events in a job-order Entries for Benchmores 2012 accounting events, described next, are shown in
costing system affect financial ledger T-accounts in Exhibit 12.5 on page 542. As you study each event, trace it to the
statements. T-accounts. The entries in Exhibit 12.5 are cross-referenced to sequential event num-
bers. The individual effect of each event on the financial statements is shown and dis-
cussed in the following section.

EXHIBIT 12.4 EXHIBIT 12.4

BENCHMORE BOAT COMPANY continued
Trial Balance
As of January 1, 2012 Subsidiary Account Balances
Work in Process Finished Goods
Debit Credit
Inventory Inventory
Cash $ 73,000
Boat 103 $14,000 Boat 101 $50,000
Raw materials inventory 7,000
Boat 104 8,000 Boat 102 35,000
Work in process inventory 34,000
Boat 105 12,000
Finished goods inventory 85,000
Production supplies 300 Total $34,000 Total $85,000
Manufacturing equipment 90,000
Accumulated depreciation $ 32,000
Common stock 200,000
Retained earnings 57,300
Total $289,300 $289,300

EVENT 1 Benchmore paid $14,000 cash to purchase raw materials.

The effects of this event on the companys financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials
Cash 1 Inventory

(14,000) 1 14,000 5 NA 1 NA NA 2 NA 5 NA

Event 1 is an asset exchange; it does not affect total assets reported on the balance
sheet. The asset cash decreases and the asset raw materials inventory increases. The
income statement is not affected.
EVENT 2 Benchmore used $17,000 of direct raw materials in the process of making boats.
The amounts used for Boat 103, Boat 104, and Boat 105 were $8,000, $3,400, and
$5,600, respectively. The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials Work in Process

Inventory 1 Inventory

(17,000) 1 17,000 5 NA 1 NA NA 2 NA 5 NA
edm10890_ch12_534-585.indd Page 541 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 541

This event is an asset exchange. It does not affect total assets reported on the balance
sheet. The asset raw materials inventory decreases and the asset work in process inven-
tory increases. The income statement is not affected. In addition to recording the effects
in the Work in Process Inventory control account, Benchmore adjusted the individual
job cost sheets to reflect the raw materials used on each job, as shown in Exhibit 12.5.

EVENT 3 Benchmore paid $1,200 cash to purchase production supplies.

The effects of this event on the companys financial statements are shown here.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Production
Cash 1 Supplies

(1,200) 1 1,200 5 NA 1 NA NA 2 NA 5 NA

This event is also an asset exchange. It does not affect total assets reported on the
balance sheet. One asset, cash, decreases and another asset, production supplies,
increases. Purchasing production supplies does not affect the income statement. The
cost of supplies is allocated to work in process inventory as part of overhead and is
expensed as part of cost of goods sold.

EVENT 4 Benchmore paid $8,000 cash to production employees who worked on Boat 103.
The effects of this event on the companys financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Work in Process
Cash 1 Inventory

(8,000) 1 8,000 5 NA 1 NA NA 2 NA 5 NA

These wages are not salary expense. Because the employees worked to make inventory,
the cost of their labor is added to work in process inventory. This event is an asset exchange.
The asset cash decreases, and the asset work in process inventory increases. Neither total
assets reported on the balance sheet nor any revenues or expenses on the income statement
are affected. In addition to recording the effects in the Work in Process Inventory control
account, Benchmore adjusted the Boat 103 job cost sheet to reflect the labor used on the
job. Refer to Exhibit 12.5; the $8,000 labor cost is entered in both the Work in Process
Inventory control account and on the job cost sheet for Boat 103.

EVENT 5 Benchmore applied manufacturing overhead costs of $6,240 to the

Boat 103 job.
Production employees completed Boat 103. When the boat was finished, the actual amount
of many costs to make it were not then known. During the year, Benchmore sells boats
before knowing the exact costs of making them. Although a portion of the total production
supplies, depreciation, supervisory salaries, rental cost, and utilities were used while Boat103
was under construction, the actual cost of these resources is not known until the end of the
year. To make timely decisions, such as setting the selling prices for boats, Benchmore must
assign estimated overhead costs to boats as they are completed.
To estimate overhead as accurately as possible, Benchmore first reviewed the previ-
ous years actual overhead costs. It adjusted those amounts for expected changes. As-
sume Benchmore estimated total overhead costs for 2012 to be as follows: production
supplies, $1,400; depreciation, $4,000; utilities and other indirect costs, $10,590, for a
total of $15,990 ($1,400 1 $4,000 1 $10,590).
 edm10890_ch12_534-585.indd Page 542
To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
542

EXHIBIT 12.5
Ledger T-Accounts for Benchmore Boat Company
Cash Raw Materials Inventory Work in Process Inventory Finished Goods Inventory Common Stock
Bal. 73,000 (1) 14,000 Bal. 7,000 (2) 17,000 Bal. 34,000 (6) 36,240 Bal. 85,000 (14) 50,000 Bal. 200,000
(13) 91,000 (3) 1,200 (1) 14,000 (2) 17,000 (6) 36,240
(4) 8,000 (4) 8,000 Retained Earnings
Bal. 4,000 Bal. 71,240
(7) 24,500 (5) 6,240 Bal. 57,300
(8) 12,000 Manufacturing Overhead (8) 12,000
(10) 10,100 (9) 9,360 Sales Revenue

7/24/10
(10) 10,100 (5) 6,240
Bal. 94,200 (11) 4,000 (9) 9,360 Bal. 50,360 (13) 91,000
Boat 101
(12) 1,100
Production Supplies Balance 50,000 Cost of Goods Sold
(15) 400 Job Cost Sheets

11:39 PM user-f497
Bal. 300 (12) 1,100 Sold (50,000) (14) 50,000 (15) 400
Bal. 0 (Subsidiary accounts)
(3) 1,200 Balance 0 Bal. 49,600
Bal. 400 Boat 103
Selling and Admin. Exp.
Beginning balance 14,000
Manufacturing (7) 24,500
Materials 8,000
Equipment Boat 102
Labor 8,000
Bal. 90,000 Overhead 6,240 Balance 35,000
Product cost 36,240 Cost transferred 0
Accumulated Dep.
To finish goods (36,240) Balance 35,000
Bal. 32,000
(11) 4,000 Ending balance 0
Bal. 36,000
Boat 104 Boat 103
Beginning balance 8,000 Balance 0
Materials 3,400 Cost transferred 36,240
Labor 5,000 Balance 36,240
Overhead 3,900 Boat 101
Ending balance 20,300 Cost sheet data
transferred to
permanent storage
Boat 105
Beginning balance 12,000
Materials 5,600
Labor 7,000

/Volumes/105/PHS00142/work/indd
Overhead 5,460
Ending balance 30,060
edm10890_ch12_534-585.indd Page 543 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 543

Benchmore has identified a cause and effect relationship between direct labor time
and overhead cost. Boats that require more labor also require more overhead. For
example, the more hours production employees work, the more supplies they use.
Similarly, more labor hours translates into more equipment use, causing more utilities
and depreciation costs. Because of the relationship between labor and indirect costs,
Benchmore uses direct labor hours as the allocation base for overhead costs. Benchmore
estimated it would use a total of 4,100 labor hours during 2012. It established a prede-
termined overhead rate as follows:
Predetermined Total estimated Total estimated
5 4
overhead rate overhead costs direct labor hours
Predetermined overhead rate 5 $15,990 4 4,100
5 $3.90 per direct labor hour
Boat 103 required 1,600 actual direct labor hours. Benchmore applied $6,240 (1,600
hours 3 $3.90) of overhead to that job. The effects of the overhead application on the
companys financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing Work in Process

Overhead 1 Inventory

(6,240) 1 6,240 5 NA 1 NA NA 2 NA 5 NA

The event is an asset exchange. One asset, work in process inventory, increases and
a temporary asset, manufacturing overhead, decreases. Applying overhead costs to
work in process inventory does not affect the income statement. When finished goods are
sold, overhead costs affect the income statement through cost of goods sold. The job cost
sheet for Boat 103 reflects the applied (estimated) overhead cost. The T-accounts in
Exhibit 12.5 also show the overhead application.
EVENT 6 Benchmore transferred $36,240 of product costs for completed Boat 103 from
work in process inventory to finished goods inventory.
The effects of this transfer on the companys financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Work in Process Finished Goods

Inventory 1 Inventory

(36,240) 1 36,240 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Benchmore transferred cost from the Work in
Process Inventory control account to the Finished Goods Inventory control account.
The transfer does not affect total assets reported on the balance sheet, nor does it affect
the income statement. The job cost sheet is moved to the finished goods file folder.
Exhibit 12.5 illustrates these effects.
EVENT 7 Benchmore paid $24,500 cash for selling and administrative expenses.
The effects of this transaction on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

(24,500) 5 NA 1 (24,500) NA 2 24,500 5 (24,500)

edm10890_ch12_534-585.indd Page 544 7/27/10 5:38 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
544 Chapter 12

This is an asset use transaction. Cash and stockholders equity (retained earnings)
decrease. Recognizing the expense decreases net income.
EVENT 8 Benchmore paid $12,000 cash to production employees for work on
Boats 104 and 105.
The cost of direct labor used was $5,000 for Boat 104 and $7,000 for Boat 105. These
jobs were still incomplete at the end of 2012. The effects of this event on the financial
statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Work in Process
Cash 1 Inventory

(12,000) 1 12,000 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. It does not affect total assets reported on the balance
sheet. It does not affect the income statement. In addition to the effects on the Work in
Process Inventory control account, Benchmore adjusted the individual job cost sheets to
reflect the labor used on each job. Exhibit 12.5 illustrates these effects.
EVENT 9 Benchmore applied estimated manufacturing overhead costs to the Boat 104
and Boat 105 jobs.
As previously explained, the predetermined overhead rate was $3.90 per direct labor
hour (see Event 5). Assume the work described in Event 8 represented 1,000 direct labor
hours for Boat 104 and 1,400 direct labor hours for Boat 105. The amount of estimated
overhead cost Benchmore applied to the two jobs is calculated as follows:

Predetermined Actual Labor Amount of

Job Number Overhead Rate 3 Hours Used 5 Applied Overhead
Boat 104 $3.90 3 1,000 5 $3,900
Boat 105 3.90 3 1,400 5 5,460
Total $9,360

The effects on the companys financial statements of applying the overhead follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing Work in Process

Overhead 1 Inventory

(9,360) 1 9,360 5 NA 1 NA NA 2 NA 5 NA

Applying overhead is an asset exchange. Total assets and net income, are not
affected. Overhead costs of $3,900 for Boat 104 and $5,460 for Boat 105 are recorded
on the job cost sheets. The total, $9,360, is recorded in the Work in Process Inventory
control account. Trace these allocations to Exhibit 12.5.
EVENT 10 Benchmore paid $10,100 cash for utilities and other indirect product costs.
The effects of this event on the financial statements are shown here.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing
Cash 1 Overhead

(10,100) 1 10,100 5 NA 1 NA NA 2 NA 5 NA
edm10890_ch12_534-585.indd Page 545 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 545

Paying for actual overhead costs is an asset exchange. Total assets, net income, and job
cost sheets are not affected. Recall that estimated overhead costs were previously recorded in
work in process inventory and on the job cost sheets (Events 5 and 9).

EVENT 11 Benchmore recognized $4,000 of actual manufacturing equipment depreciation.

The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Book Value of
Manufacturing Manufacturing
Equipment 1 Overhead

(4,000) 1 4,000 5 NA 1 NA NA 2 NA 5 NA

Depreciation of manufacturing equipment represents an actual indirect product cost

(overhead), not an expense (even though the amount of depreciation is an estimate). Rec-
ognizing this depreciation is an asset exchange. The book value of the manufacturing
equipment decreases and the Manufacturing Overhead account increases. Neither the
total amount of assets reported on the balance sheet nor the income statement are af-
fected. The job cost sheets are also not affected when actual overhead cost (deprecia-
tion) is recognized. The inventory accounts and job cost sheets reflect estimated
overhead.

EVENT 12 Benchmore counted the production supplies on hand at year-end and

recognized actual overhead cost for the supplies used.
During 2012, Benchmore had available for use $1,500 of production supplies ($300 be-
ginning balance 1 $1,200 supplies purchased). A physical count disclosed there were
$400 of supplies on hand at the end of 2012. Benchmore therefore must have used
$1,100 of supplies ($1,500 2 $400). The effects on the companys financial statements
of recognizing supplies used follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Production Manufacturing
Supplies 1 Overhead

(1,100) 1 1,100 5 NA 1 NA NA 2 NA 5 NA

The event is an asset exchange. Total assets and net income are not affected. The
job cost sheets are not affected. Remember that estimated overhead costs were previ-
ously recorded on the job cost sheets.
EVENT 13 Benchmore sold Boat 101 for $91,000 cash.
The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

91,000 5 NA 1 91,000 91,000 2 NA 5 91,000

Recognizing revenue from selling inventory is an asset source event. Both assets
(cash) and stockholders equity (retained earnings) increase. Revenue recognition also
increases the net income reported on the income statement.

EVENT 14 Benchmore recognized cost of goods sold for Boat 101.

The effects of this event on the financial statements follow.
edm10890_ch12_534-585.indd Page 546 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
546 Chapter 12

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

(50,000) 5 NA 1 (50,000) NA 2 50,000 5 (50,000)

Recognizing cost of goods sold is an asset use transaction. It decreases assets

(finished goods inventory) and stockholders equity (retained earnings). The expense
recognition decreases net income. The job cost sheet for Boat 101 is transferred to the
permanent files. The cost sheet is retained because information from it could be useful
for estimating costs of future jobs.
EVENT 15 Benchmore closed the Manufacturing Overhead account, reducing cost of
goods sold by $400.
During 2012, Benchmore applied $15,600 of estimated overhead cost to production.
Actual overhead costs were $15,200. Overhead was therefore overapplied by $400
($15,600 2 $15,200), meaning too much overhead was transferred to the Work in
Process Inventory, Finished Goods Inventory, and Cost of Goods Sold accounts. If the
amount of overapplied overhead were significant, Benchmore would have to allocate it
proportionately among the inventory and Cost of Goods Sold accounts. In this case,
the amount is insignificant and Benchmore assigned it entirely to cost of goods sold.
The effects of this event on the companys financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

400 5 NA 1 400 NA 2 (400) 5 400

Overapplied overhead indicates the estimated cost transferred from the asset accounts
to cost of goods sold was too high. The entry to close manufacturing overhead corrects the
overstatement. Recording $400 in the overhead account increases total assets. The increase
in assets is matched by a decrease in cost of goods sold, which reduces expenses, increases
net income, and increases stockholders equity (retained earnings). After this adjustment,
the total increases in the overhead account (actual costs) equal the total decreases (esti-
mated costs). Manufacturing Overhead is a temporary account. It is closed at year-end
and does not appear in the financial statements. Exhibit 12.6 displays Benchmore Boat
Companys preclosing trial balance at the end of 2012.

EXHIBIT 12.6
BENCHMORE BOAT COMPANY
Trial Balance
As of December 31, 2012
Debit Credit
Cash $ 94,200
Raw materials inventory 4,000
Work in process inventory 50,360
Finished goods inventory 71,240
Production supplies 400
Manufacturing equipment 90,000
Accumulated depreciation $ 36,000
Common stock 200,000
Retained earnings 57,300
Sales revenue 91,000
Cost of goods sold 49,600
Selling and administrative expense 24,500
Total $384,300 $384,300
edm10890_ch12_534-585.indd Page 547 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 547

CHECK YOURSELF 12.1

Wilson Cabinets makes custom cabinets for home builders. It incurred the following costs
during the most recent month.

Inventory Materials Labor

Job 1 $4,200 $2,700
Job 2 2,300 5,000
Job 3 1,700 800

Wilsons predetermined overhead rate is $0.80 per direct labor dollar. Actual overhead costs
were $7,100. Wilson completed and sold Jobs 1 and 2 during the month, but Job 3 was not
complete at month-end. The selling prices for Jobs 1 and 2 were $14,900 and $16,600,
respectively. What amount of gross margin would Wilson report on the income statement
for the month?
Answer Cost accumulated in the Work in Process account:

Inventory Materials Labor Overhead* Total

Job 1 $4,200 $2,700 $2,160 $ 9,060
Job 2 2,300 5,000 4,000 11,300
Job 3 1,700 800 640 3,140

*80% of direct labor cost.

Total allocated overhead is $6,800 ($2,160 1 $4,000 1 $640). Since actual overhead is
$7,100, overhead is underapplied by $300 ($7,100 2 $6,800).

Sales revenue ($14,900 1 $16,600) $31,500

Cost of goods sold (Job 1, $9,060 1 Job 2, $11,300 1 Underapplied overhead, $300) (20,660)
Gross margin $10,840

PROCESS COSTING SYSTEM ILLUSTRATED

In process costing systems, product costs flow through the same general ledger
accounts as in job-order costing systems: Raw Materials Inventory, Work in Process LO 4
Inventory, Finished Goods Inventory, and ultimately Cost of Goods Sold. Accounting
for work in process inventory, however, differs between the two systems. Instead of Explain how events in a process
accumulating work in process costs by jobs, process costing systems accumulate prod- costing system affect financial
uct costs by departments. The cost of all goods that move through a processing statements.
department during a given accounting period is charged to that department. Work in
process subsidiary documents ( job cost sheets) are not needed. Process costing systems
are easier to use than job-order systems. They do not, however, distinguish the cost of
one product from another. Process systems are therefore not appropriate for manufac-
turers of distinctly different products; they are suited to account for continuous mass
production of uniform products. Process costing systems produce the same cost per
unit for all products.
To illustrate how a process costing system operates, we analyze the operations of Janis
Juice Company during 2012. Recall that Janis uses three distinct processes to produce
cans of apple juice. Raw materials (whole apples) enter the extraction department where
edm10890_ch12_534-585.indd Page 548 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
548 Chapter 12

juice concentrate is extracted from whole fruit. The

EXHIBIT 12.7 juice extract passes to the mixing department where
JANIS JUICE COMPANY Janis adds water, sugar, food coloring, and preserva-
tives. The juice mixture then moves to the packaging
Trial Balance
department where it is canned and boxed for shipment.
As of January 1, 2012 Exhibit 12.7 shows the companys 2012 beginning
Debit Credit account balances.
The entries for Janis Juice Companys 2012
Cash $320,000
accounting events, discussed individually in the fol-
Raw materialsfruit 7,800
lowing sections, are shown in ledger T-accounts in
Raw materialsadditives 3,100
Raw materialscontainers 9,500 Exhibit 12.9 on page 556. The T-account entries are
Work in processextraction 22,360 cross-referenced to sequential event numbers. As you
Work in processmixing 7,960 study each event, trace it to the T-accounts.
Work in processpackaging 21,130
Finished goods inventory 20,700 EVENT 1 Janis paid $84,000 cash to purchase raw
Common stock $180,000 materials.
Retained earnings 232,550 The effects of this event on the companys financial
Total $412,550 $412,550 statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials
Cash 1 Inventory

(84,000) 1 84,000 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are not affected. The
total purchase was for $25,000 of whole fruit, $30,000 of additives, and $29,000 of con-
tainers. Janis maintains separate inventory accounts for each category of raw material.
Trace the entries for this event to the ledger accounts in Exhibit 12.9.

EVENT 2 Janis processed $26,720 of whole fruit to produce juice extract.

The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials WIP

Fruit 1 Extraction

(26,720) 1 26,720 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. It does not affect total assets or net income. Janis
assigns the cost of the materials used to the extraction department rather than to any
particular product or batch of products. The extraction department adds the same
amount of value to each can of juice.

EVENT 3 Janis paid $38,000 cash to production employees who worked in the extraction
department.
The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP
Cash 1 Extraction

(38,000) 1 38,000 5 NA 1 NA NA 2 NA 5 NA
edm10890_ch12_534-585.indd Page 549 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 549

This event is also an asset exchange. Production labor cost is not salary expense.
Total assets and net income are not affected. Like the raw materials, the labor cost is
assigned to the department rather than to individual products.

EVENT 4 Janis applied estimated manufacturing overhead costs to the extraction

department work in process inventory.
Janis has identified a relationship between labor dollars and indirect overhead costs.
The more labor dollars paid, the more indirect resources consumed. Janis estimated
total indirect costs in 2012 would be $96,000 and that it would pay $120,000 to pro-
duction employees. Using these estimates, Janis established a predetermined overhead
rate as follows.
Predetermined Total estimated Total estimated
5 4
overhead rate overhead costs direct labor dollars
Predetermined
5 $96,000 4 $120,000
overhead rate
5 $0.80 per direct labor dollar
Since the extraction department incurred $38,000 of labor cost (see Event 3), Janis
applied $30,400 ($38,000 3 $0.80) of overhead to that department. The effects of the
overhead application on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing WIP
Overhead 1 Extraction

(30,400) 1 30,400 5 NA 1 NA NA 2 NA 5 NA

The event is an asset exchange. Total assets and net income are not affected.

EVENT 5 Janis finished processing some of the whole fruit and transferred the related
cost from the extraction department Work in Process Inventory account to the mixing
department Work in Process Inventory account.
Total product costs in the extraction department Work in Process Inventory account
amounted to $117,480 ($22,360 beginning balance 1 $26,720 materials 1 $38,000 labor 1 LO 5
$30,400 applied overhead). The beginning inventory represented 100,000 units of product
(cans) and the fruit Janis added started an additional 485,000 cans. The amount of fruit Calculate equivalent units and
placed into production therefore represented 585,000 (100,000 1 485,000) units. Assume prepare a cost of production report.
the extract transferred to the mixing department represented 500,000 cans of juice. The
extraction department therefore had 85,000 (585,000 2 500,000) units in ending inventory
that were started but not completed.
Janis had to allocate the total $117,480 product cost between the 85,000 partially
completed units in ending inventory and the 500,000 completed units it transferred
to the mixing department. A rational allocation requires converting the 85,000 par-
tially completed units into equivalent whole units. The logic behind equivalent whole
units relies on basic arithmetic. For example, 2 units that are 50 percent complete
are equivalent to 1 whole (100 percent complete) unit (2 3 0.5 5 1). Similarly, 4 units
that are 25 percent complete are equivalent to 1 whole unit (4 3 0.25 5 1).
Further, 100 units that are 30 percent complete are equivalent to 30 whole units
(100 units 3 0.30 5 30).
An engineer estimated the 85,000 units in the extraction departments ending
inventory were 40 percent complete. The equivalent whole units in ending inventory
was therefore 34,000 (85,000 3 0.4). The total equivalent units processed by the
extraction department during 2012 was 534,000 (500,000 units finished and transferred
edm10890_ch12_534-585.indd Page 550 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
550 Chapter 12

to the mixing department plus 34,000 equivalent whole units in ending inventory). Janis
determined the average cost per equivalent unit as follows:
Cost per equivalent unit 5 Total cost 4 Number of equivalent whole units
Cost per equivalent unit 5 $117,480 4 534,000
5 $0.22 per equivalent unit
Janis used the cost per equivalent unit to allocate the total cost incurred in the extraction
department between the amount transferred to the mixing department and the amount
in the extraction departments ending work in process inventory as follows.

Equivalent Units 3 Cost per Unit Cost to Be Allocated

Transferred-out costs 500,000 3 $0.22 $110,000
Ending inventory 34,000 3 0.22 7,480
Total $117,480

The effects of transferring $110,000 from the extraction departments work in pro-
cess inventory to the mixing departments work in process inventory follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP WIP
Extraction 1 Mixing

(110,000) 1 110,000 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are unaffected.
The allocation of costs between units transferred out and ending inventory is fre-
quently summarized in a cost of production report. Cost of production reports usually
provide details for three categories: the computation of equivalent units; the determina-
tion of cost per equivalent unit; and the allocation of total production cost between the
units transferred out and the units in ending inventory. Exhibit 12.8 illustrates Janiss
2012 cost of production report for the extraction department.
The method used here to determine equivalent units is the weighted average method.
The weighted average method does not account for the state of completion of units in
beginning inventory. Equivalent units are computed for ending inventory only. Failing to
account for equivalent units in beginning as well as ending inventories can distort the
accuracy of the cost assigned to goods transferred out and goods in inventory accounts
at the end of the period. Managers frequently tolerate some inaccuracy because the
weighted average method is relatively easy to use. If accuracy is of paramount impor-
tance, however, a company might use the first-in, first-out (FIFO) method. The FIFO
method accounts for the degree of completion of both beginning and ending in-
ventories, but it is more complex to apply. Applying the FIFO method in process
costing applications is explained in upper-level accounting courses. It is beyond the
scope of this text.

EVENT 6 Janis mixed (used) $24,400 of additives with the extract transferred from the
extraction department.
Conceptually, the juice extract transferred from the extraction department is a raw mate-
rial to the mixing department. The mixing department adds other materials to the juice
extract, such as sweetener, food coloring, and preservatives. Although both transferred-in
costs and additives represent raw materials, they are traditionally classified separately.
edm10890_ch12_534-585.indd Page 551 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 551

EXHIBIT 12.8
JANIS JUICE COMPANY
Cost of Production Report
Extraction Department
For the Year Ended December 31, 2012
Actual Equivalent
Determination of Equivalent Units
Beginning inventory 100,000
Units added to production 485,000
Total 585,000
Transferred to finished goods 500,000 100% Complete 500,000
Ending inventory 85,000 40% Complete 34,000
Total 585,000 534,000
Determination of Cost per Unit
Cost accumulation
Beginning inventory $ 22,360
Materials 26,720
Labor 38,000
Overhead 30,400
Total $117,480
Divided by 4
equivalent units 534,000
Cost per equivalent unit (i.e., per can) $ 0.22
Cost Allocation
To work in process inventory, mixing dept.
(500,000 3 $0.22) $110,000
To ending inventory (34,000 3 $0.22) 7,480
Total $117,480

Review the mixing departments Work in Process account in Exhibit 12.9 to see these costs.
The effects of using additional materials in the mixing department follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials WIP

Additives 1 Mixing

(24,400) 1 24,400 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are not affected.
EVENT 7 Janis paid $48,000 cash to production employees who worked in the mixing
department.
The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP
Cash 1 Mixing

(48,000) 1 48,000 5 NA 1 NA NA 2 NA 5 NA

This is an asset exchange. Total assets and net income are not affected.
edm10890_ch12_534-585.indd Page 552 7/27/10 5:38 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
552 Chapter 12

TThe company that produces breakfast

Answers to The Curious Accountant cereal should use a process costing

system. This system is conceptually very
simple, especially when there is no be-
ginning or ending work in process inventory. In the situation described in the Curious Accountant, the cost of one box
of Corn Flakes would be calculated by dividing $115 million by 70 million boxes, yielding a cost of $1.64 per box.
The construction company should use a job-order costing system. This system, as you have seen, requires
extensive recordkeeping. The cost of each item of material that goes into the LNG project and the wages of each
worker who helps build the project must be tracked to the specific job in question. These costs, along with the
appropriate amount of overhead, will comprise the cost of that particular job.

EVENT 8 Janis applied estimated manufacturing overhead costs to the mixing

department work in process inventory.
Using the predetermined overhead rate calculated in Event 4, Janis determined it should
apply $38,400 ($48,000 labor 3 0.80 overhead rate) of overhead costs to the mixing
departments work in process inventory. The effects of the overhead application on the
financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing WIP
Overhead 1 Mixing

(38,400) 1 38,400 5 NA 1 NA NA 2 NA 5 NA

The event is an asset exchange. Total assets and net income are not affected.
EVENT 9 Janis finished mixing some of the juice extract with additives and transferred
the related cost from the mixing department Work in Process Inventory account to the
packaging department Work in Process Inventory account.
Total product costs in the mixing department were $228,760 ($7,960 beginning bal-
ance1 $110,000 transferred-in cost 1 $24,400 materials 1 $48,000 labor 1 $38,400
overhead). An engineer estimated that Janis transferred 510,000 units of mixed juice
from the mixing department to the packaging department and that the 88,000 units of
juice in the mixing department ending inventory were 25 percent complete.
The mixing department ending inventory therefore represented 22,000 (88,000 3 0.25)
equivalent whole units. The total equivalent whole units produced by the mixing department
was 532,000 (510,000 1 22,000). The average cost per equivalent unit was therefore $0.43
($228,760 4 532,000). Janis allocated the total product costs incurred in the mixing depart-
ment between the amount transferred to the packaging department and the amount in the
mixing departments ending work in process inventory as follows.

Equivalent Units 3 Cost per Unit Cost to Be Allocated

Transferred-out costs 510,000 3 $0.43 $219,300
Ending inventory 22,000 3 0.43 9,460
Total $228,760
edm10890_ch12_534-585.indd Page 553 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 553

The effects of transferring $219,300 from the mixing department work in process inven-
tory to the packaging department work in process inventory are as follows.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP WIP
Mixing 1 Packaging

(219,300) 1 219,300 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are unaffected. Find the
ending balance in the mixing departments Work in Process Inventory account in
Exhibit 12.9. Also find the entry that transfers $219,300 of product cost from the
mixing departments Work in Process Inventory account to the packaging departments
Work in Process Inventory account.
EVENT 10 Janis added containers and other packaging materials costing $32,000 to
work in process in the packaging department.
The effects of this event on the financial statements follow:

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Raw Materials WIP

Containers 1 Packaging

(32,000) 1 32,000 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are not affected.
EVENT 11 Janis paid $43,000 cash to production employees who worked in the
packaging department.
The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP
Cash 1 Packaging

(43,000) 1 43,000 5 NA 1 NA NA 2 NA 5 NA

This is an asset exchange. Total assets and net income are not affected.
EVENT 12 Janis applied estimated manufacturing overhead costs to the packaging
department work in process inventory.
Using the predetermined overhead rate calculated in Event 4, Janis determined it should
apply $34,400 ($43,000 labor 3 0.80 overhead rate) of overhead costs to the packaging
departments work in process inventory. The effects of the overhead application on the
financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing WIP
Overhead 1 Packaging

(34,400) 1 34,400 5 NA 1 NA NA 2 NA 5 NA

The event is an asset exchange. Total assets and net income are not affected.
edm10890_ch12_534-585.indd Page 554 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
554 Chapter 12

EVENT 13 Janis finished packaging some of the juice and transferred the related cost
from the packaging department Work in Process Inventory account to the Finished
Goods Inventory account.
Total product costs in the packaging department were $349,830 ($21,130 beginning
balance 1 $219,300 transferred-in cost 1 $32,000 materials 1 $43,000 labor 1
$34,400 overhead). An engineer estimated that Janis transferred 480,000 units of
packaged juice from the packaging department to finished goods inventory and that
the 90,000 units of juice in the packaging department ending inventory were 30 per-
cent complete.
The packaging department ending inventory therefore represented 27,000 (90,000 3
0.30) equivalent whole units. The total equivalent whole units produced by the packag-
ing department was 507,000 (480,000 1 27,000). The average cost per equivalent unit
was therefore $0.69 ($349,830 4 507,000). Janis allocated the total product costs
incurred in the packaging department between the amount transferred to finished
goods inventory and the amount in the packaging departments ending work in process
inventory as follows.

Equivalent Units 3 Cost per Unit Cost to Be Allocated

Transferred-out costs 480,000 3 $0.69 $331,200
Ending inventory 27,000 3 0.69 18,630
Total $349,830

The effects of transferring $331,200 from the packaging department work in pro-
cess inventory to the finished goods inventory follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

WIP
Packaging 1 Finished Goods

(331,200) 1 331,200 5 NA 1 NA NA 2 NA 5 NA

This event is an asset exchange. Total assets and net income are unaffected. Find
the ending balance in the packaging departments Work in Process Inventory account
in Exhibit 12.9. Also find the entry that transfers $331,200 of product cost from the
packaging departments Work in Process Inventory account to the Finished Goods
Inventory account.

EVENT 14 Janis paid $106,330 cash for actual overhead costs.

The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

Manufacturing
Cash 1 Overhead

(106,330) 1 106,330 5 NA 1 NA NA 2 NA 5 NA

Incurring actual overhead costs is an asset exchange event. Total assets and net
income are not affected.

EVENT 15 Janis sold 490,000 cans of juice for $1 per can.

The effects of this event on the financial statements follow.
edm10890_ch12_534-585.indd Page 555 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 555

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

490,000 5 NA 1 490,000 490,000 2 NA 5 490,000

Recognizing revenue from the sale of inventory is an asset source event. Assets
(cash) and stockholders equity (retained earnings) both increase, as do revenue and net
income reported on the income statement.
EVENT 16 Janis recognized cost of goods sold for the 490,000 cans of juice sold in
Event 15.
The average cost per finished can of juice was $0.69 (see Event 13). Cost of goods sold
was therefore $338,100 (490,000 units 3 $0.69). The effects of this event on the finan-
cial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

(338,100) 5 NA 1 (338,100) NA 2 338,100 5 (338,100)

Recognizing cost of goods sold is an asset use transaction. Both assets (finished
goods inventory), and stockholders equity (retained earnings), decrease. The increase
in the expense, cost of goods sold, decreases net income.
EVENT 17 Janis paid $78,200 cash for selling and administrative expenses.
The effects of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

(78,200) 5 NA 1 (78,200) NA 2 78,200 5 (78,200)

Recognizing selling and administrative expense is an asset use transaction. It

decreases assets (cash) and stockholders equity (retained earnings). Recognizing the
expense decreases net income.
EVENT 18 Janis closed the Manufacturing Overhead account and increased the Cost of
Goods Sold account by $3,130.
During 2012, Janis applied $103,200 of overhead cost to production. Actual overhead
costs were $106,330. Overhead was therefore underapplied by $3,130 ($106,330 2
$103,200), indicating that too little overhead was transferred to work in process inven-
tory, finished goods inventory, and cost of goods sold. Janis considered the under-
applied amount insignificant and assigned it directly to cost of goods sold. The effects
of this event on the financial statements follow.

Assets 5 Liabilities 1 Equity Revenue 2 Expenses 5 Net Income

(3,130) 5 NA 1 (3,130) NA 2 3,130 5 (3,130)

Since underapplied overhead means too little estimated cost was transferred from
the asset accounts to the Cost of Goods Sold account, closing the Manufacturing Over-
head account to cost of goods sold corrects the understatement. The additional over-
head costs of $3,130 increase cost of goods sold and decrease net income. After this
adjustment, the total increases in the overhead account (actual costs) equal the total
decreases (estimated costs). The ending balance in the Manufacturing Overhead
account is zero. Manufacturing overhead is not reported on any financial statement.
Exhibit 12.10 shows the year-end adjusted trial balance for Janis Juice Company.
 edm10890_ch12_534-585.indd Page 556
To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
556

EXHIBIT 12.9
Ledger T-Accounts for Janis Juice Company

7/24/10
Cash Raw MaterialsFruit Work in ProcessExtraction Finished Goods Inventory Common Stock
Bal. 320,000 (1) 84,000 Bal. 7,800 (2) 26,720 Bal. 22,360 (5) 110,000 Bal. 20,700 (16) 338,100 Bal. 180,000
(15) 490,000 (3) 38,000 (1) 25,000 (2) 26,720 (13) 331,200

11:39 PM user-f497
(7) 48,000 (3) 38,000 Retained Earnings
Bal. 6,080 Bal. 13,800
(11) 43,000 (4) 30,400 Bal. 232,550
(14) 106,330 Raw MaterialsAdditives Bal. 7,480
(17) 78,200 Sales Revenue
Bal. 3,100 (6) 24,400
Bal. 412,470 Work in ProcessMixing
(1) 30,000 (15) 490,000
Bal. 8,700 Bal. 7,960 (9) 219,300
(5) 110,000 Cost of Goods Sold
Raw MaterialsContainers (6) 24,400
(16) 338,100
(7) 48,000
Bal. 9,500 (10) 32,000 (18) 3,130
(8) 38,400
(1) 29,000 Bal. 341,230
Bal. 9,460
Bal. 6,500
Selling and Admin. Exp.
Work in ProcessPackaging
Manufacturing Overhead (17) 78,200
Bal. 21,130 (13) 331,200
(14) 106,330 (4) 30,400 (9) 219,300
(8) 38,400 (10) 32,000
(12) 34,400 (11) 43,000
(18) 3,130 (12) 34,400
Bal. 0 Bal. 18,630

/Volumes/105/PHS00142/work/indd
edm10890_ch12_534-585.indd Page 557 7/27/10 5:38 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 557

EXHIBIT 12.10
JANIS JUICE COMPANY
Adjusted Trial Balance
As of December 31, 2012
Debit Credit
Cash $412,470
Raw materialsfruit 6,080
Raw materialsadditives 8,700
Raw materialscontainers 6,500
Work in processextraction 7,480
Work in processmixing 9,460
Work in processpackaging 18,630
Finished goods inventory 13,800
Common stock $180,000
Retained earnings 232,550
Sales revenue 490,000
Cost of goods sold 341,230
Selling and administrative expenses 78,200
Total $902,550 $902,550

CHECK YOURSELF 12.2

Western Manufacturing Company uses a process costing system. Its products pass through
two departments. Beginning inventory in Department Is Work in Process (WIP) account was
$5,000. During the month the department added $13,200 of product costs to the WIP account.
There were 200 units of product in beginning inventory, and 500 units were started during the
month. Ending inventory consisted of 300 units 40 percent complete. Prepare a cost of produc-
tion report showing the cost of goods transferred from Department I to Department II and the
cost of Department Is ending work in process inventory.
Answer

Cost of Production Report

Actual Equivalent Units
Determination of Equivalent Units
Beginning inventory 200
Units added to production 500
Total 700
Transferred to finished goods 400 100% Complete 400
Ending inventory 300 40% Complete 120
Total 700 520
Determination of Cost per Unit
Cost accumulation
Beginning inventory $ 5,000
Product costs added 13,200
Total product costs $18,200
Divide by 4
equivalent units 520
Cost per equivalent unit $ 35
Cost Allocation
Transferred to Department II (400 3 $35) $14,000
Ending WIP inventory (120 3 $35) 4,200
Total $18,200
edm10890_ch12_534-585.indd Page 558 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
558 Chapter 12

FOCUS ON INTERNATIONAL ISSUES

JOB-ORDER, PROCESS, AND HYBRID COSTING SYSTEMS CROSS
INTERNATIONAL BORDERS
Companies throughout the world use job-order, process, and hybrid costing
systems. Nestl Group, a Swiss company, makes chocolate candy bars, among
many other products. A homogeneous product like candy bars requires the use of
a process cost system. In contrast, Airbus is an aircraft manufacturing company
headquartered in Toulouse, France. When it completes an order for five A320
airplanes for Air New Zealand, the cost of this order will be determined using a
job-order costing system.

<< A Look Back

Job-order and process costing systems represent the two primary methods of accounting
for product cost flows in manufacturing companies. In both systems, entries in the
accounting records parallel the physical flow of products as they move through pro-
duction. Job-order costing systems are used by manufacturers that produce distinct
products or distinct batches of products. Products suited to job-order systems include
buildings, ships, airplanes, and special-order batches. A job-order costing system accu-
mulates costs for individual products or batches of products. Each product or batch
has a job identification number. Costs are accumulated separately by job number. A
job-order costing system requires detailed accounting information. The total cost of
all jobs is accumulated in one Work in Process Inventory control account; details of
the cost of materials, labor, and overhead for each job are kept in subsidiary records
called job-order cost sheets. Process costing systems are used by manufacturers that make
homogeneous products in a continuous production process. Products suited to a pro-
cess costing system include paint, gasoline, and soft drinks. A process costing system accu-
mulates product costs for each processing department (cutting, processing, assembling,
packaging). Because the units are homogeneous, the cost per unit can be determined
by dividing the total processing cost by the number of units (cost averaging). Any
units that are partially complete at the end of an accounting period must be con-
verted into equivalent whole units prior to determining the average cost per unit. The
cost per equivalent whole unit is used to allocate the total processing cost among
departments and ending inventories.

>> A Look Forward

The remaining two chapters are transitional chapters. Chapter 13 discusses financial
statement analysis. Chapter 14 discusses advanced topics relating to the statement of
cash flows. Some instructors include these subjects in the financial accounting course,
and other instructors cover them in the managerial accounting course.
edm10890_ch12_534-585.indd Page 559 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 559
.com/ed
A step-by-step audio-narrated series of slides is provided on the text website at hhe

.m

mo
www.mhhe.com/edmonds2011.

www

nds2011
SELF-STUDY REVIEW PROBLEM 1
Hill Construction Company uses a job-order costing system. The company had three jobs in
process at the beginning of the month. The beginning balance in the Work in Process control
account was $145,400, made up of $42,400, $65,100, and $37,900 shown on the job cost sheets
for Jobs 302, 303, and 304, respectively. During the month, Hill added the following materials
and labor costs to each job:

Inventory Materials Labor

Job 302 $10,200 $32,000

Job 303 12,400 18,000
Job 304 16,500 10,000
Total $39,100 $60,000

Overhead cost is applied at the predetermined rate of $0.60 per direct labor dollar. Actual over-
head costs for the month were $36,800. Hill completed Job 303 and sold it for $129,000 cash
during the month.

Required
a. Determine the balance in the Work in Process account at the end of the month.
b. Explain how the entry to close the Manufacturing Overhead account would affect the Cost
of Goods Sold account.
c. Determine the amount of gross margin Hill would report on its income statement for
themonth.

Solution to Requirement a
Cost accumulated in the Work in Process account:

Inventory Beg. Bal. 1 Materials 1 Labor 1 Overhead* 5 Total

Job 302 $42,400 $10,200 $32,000 $19,200 $103,800

Job 303 65,100 12,400 18,000 10,800 106,300
Job 304 37,900 16,500 10,000 6,000 70,400
*60% of direct labor cost.

Since Hill has sold Job 303, work in process at the end of the month is the sum of costs
assigned to Jobs 302 and 304, $174,200 ($103,800 1 $70,400).

Solution to Requirement b
Total applied overhead is $36,000 ($19,200 1 $10,800 1 $6,000). Since actual overhead is
$36,800, overhead is underapplied by $800 ($36,800 2 $36,000). Since the overhead is under-
applied, cost of goods sold is understated. The entry to close the overhead account would increase
the amount of cost of goods sold by $800.

Solution to Requirement c

Sales revenue $129,000

Cost of goods sold (Job 303, $106,300 1 Underapplied overhead, $800) (107,100)
Gross margin $ 21,900
edm10890_ch12_534-585.indd Page 560 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
560 Chapter 12
.com/ed
hhe A step-by-step audio-narrated series of slides is provided on the text website at

.m

mo
www.mhhe.com/edmonds2011.

www

nds2011
SELF-STUDY REVIEW PROBLEM 2
United Technology Manufacturing Company (UTMC) uses a process costing system. Products
pass through two departments. The following information applies to the Assembly Department.
Beginning inventory in the departments Work in Process (WIP) account was $18,400. During
the month UTMC added $200,273 of product costs to the WIP account. There were 5,700 units
of product in the beginning inventory and 45,300 units started during the month. The ending
inventory consisted of 4,200 units, which were 30 percent complete.

Required
Prepare a cost of production report for the month.
Solution

Cost of Production Report

Equivalent
Actual Units
Determination of Equivalent Units
Beginning inventory 5,700
Units added to production 45,300
Total 51,000
Transferred to finished goods 46,800 100% Complete 46,800
Ending inventory 4,200 30% Complete 1,260
Total 51,000 48,060
Determination of Cost per Unit
Cost accumulation
Beginning inventory $ 18,400
Product costs added 200,273
Total product costs $218,673
Divide by 4
equivalent units 48,060
Cost per equivalent unit $ 4.55
Cost Allocation
Transferred out (46,800 3 $4.55) $212,940
Ending WIP inventory (1,260 3 $4.55) 5,733
Total $218,673

KEY TERMS
Cost per equivalent unit 550 Job cost sheet 538 Process costing system 536
Equivalent whole units 549 Job-order costing Transferred-in costs 537
First-in, first-out (FIFO) system 536 Weighted average
method 550 Materials requisition method 550
Hybrid costing system 538 form 538 Work ticket 538

QUESTIONS
1. To what types of products is a job-order 3. Why do both job-order and process cost-
costing system best suited? Provide examples. ing require some form of cost averaging?
2. To what types of products is a process cost- 4. How is the unit cost of a product deter-
ing system best suited? Provide examples. mined in a process costing system?
edm10890_ch12_534-585.indd Page 561 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 561

5. Ludwig Company, which normally oper- computation. Conversely, ignoring the num-
ates a process costing system to account ber of partially completed products over-
for the cost of the computers that it pro- states the cost per unit because all of the
duces, has received a special order from a costs are included but some of the number
corporate client to produce and sell 5,000 of units are omitted from the per-unit com-
computers. Can Ludwig use a job-order putation. How can Videl obtain a more
costing system to account for the costs as- accurate cost per unit figure?
sociated with the special order even though 13. Bindon Furniture Manufacturing has com-
it uses a process costing system for its nor- pleted its monthly inventory count for din-
mal operations? ing room chairs and recorded the following
6. Which system, a job-order or a process cost- information for ending inventory: 600 units
ing system, requires more documentation? 100 percent complete, 300 units 60 percent
7. How do source documents help accoun- complete, and 100 units 20 percent com-
tants operate a costing system? plete. The company uses a process costing
8. In a job-order costing system, what are the system to determine unit cost. Why would
Work in Process Inventory subsidiary re- unit cost be inaccurate if 1,000 units were
cords called? What information is included used to determine unit cost?
in these subsidiary records? 14. What is the weighted average method of
9. How is indirect labor recorded in ledger determining equivalent units? Why is it
accounts? How is this labor eventually as- used? What are its weaknesses?
signed to the items produced in a job-order 15. What is the purpose of each of the three
costing system? primary steps in a process costing system?
10. How is depreciation on manufacturing Describe each.
equipment recorded in ledger accounts? 16. In a process costing system, what does the
How is this depreciation assigned to the term transferred-in costs mean? How is the
items produced in a job-order costing sys- amount of transferred-in costs determined?
tem and in a process costing system? 17. The finishing department is the last of four
11. Why is a process costing system not appro- sequential production departments for
priate for companies that produce items that Kowalski Graphics, Inc. The companys
are distinctly different from one another? other production departments are design,
12. The president of Videl Corporation tells layout, and printing. The finishing depart-
you that her company has a difficult time ment incurred the following costs in March
determining the cost per unit of product 2012: direct materials, $40,000; direct la-
that it makes. It seems that some units are bor, $80,000; applied overhead, $90,000;
always partially complete. Counting these and transferred-in costs, $120,000. Which
units as complete understates the cost per department incurred the transferred-in
unit because all of the units but only part costs? In what month were the transferred-
of the cost is included in the unit cost in costs incurred?

MULTIPLE-CHOICE QUESTIONS
.com/ed
Multiple-choice questions are provided on the text website at hhe
.m

mo

www.mhhe.com/edmonds2011.
www

nds2011

EXERCISESSERIES A
All applicable Exercises in Series A are available with McGraw-Hills
Connect Accounting.
Exercise 12-1A Matching products with appropriate costing systems LO 1
Required
Indicate which costing system ( job-order, process, or hybrid) would be most appropriate for the
type of product listed in the left-hand column. The first item is shown as an example.
edm10890_ch12_534-585.indd Page 562 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
562 Chapter 12

Type of Product Type of Costing System

a. Hollywood movie job-order

b. Airplane
c. Personal computer with special features
d. Coffee table
e. Plastic storage containers
f. TV set
g. Ship
h. Potato chips
i. House
j. Custom-made suit
k. Van with custom features
l. CPA review course
m. Shirts
n. Pots and pans
o. Apartment building
p. Automobile

LO 1 Exercise 12-2A Identifying the appropriate costing system

Flagg Company makes small aluminum storage bins that it sells through a direct marketing mail-
order business. The typical bin measures 6 3 8 feet. The bins are normally used to store garden tools
or other small household items. Flagg customizes bins for special-order customers by adding shelv-
ing; occasionally, it makes large bins following the unique specifications of commercial customers.
Required
Recommend the type of costing system ( job-order, process, or hybrid) that Flagg should use.
Explain your recommendation.
LO 1, 2 Exercise 12-3A Job-order or process costing system and a pricing decision
Sam Wu, a tailor in his home country, recently immigrated to the United States. He is interested
in starting a business making custom suits for men. Mr. Wu is trying to determine the cost of
making a suit so he can set an appropriate selling price. He estimates that his materials cost will
range from $100 to $160 per suit. Because he will make the suits himself, he assumes there will be
no labor cost. Some suits will require more time than others, but Mr. Wu considers this fact to be
irrelevant because he is personally supplying the labor, which costs him nothing. Finally, Mr. Wu
knows that he will incur some overhead costs such as rent, utilities, advertising, packaging, delivery,
and so on; however, he is uncertain as to the exact cost of these items.
Required
a. Should Mr. Wu use a job-order or a process costing system?
b. How can Mr. Wu determine the cost of suits he makes during the year when he does not
know what the total overhead cost will be until the end of the year?
c. Is it appropriate for Mr. Wu to consider labor cost to be zero?
d. With respect to the overhead costs mentioned in the problem, distinguish the manufacturing
overhead costs from the selling and administrative expenses. Comment on whether Mr. Wu
should include the selling and administrative expenses in determining the product cost if he
uses cost-plus pricing. Comment on whether the selling and administrative expenses should be
included in determining the product cost for financial reporting purposes.
LO 3 Exercise 12-4A Job-order costing in a manufacturing company
Ferguson Corporation builds sailboats. On January 1, 2012, the company had the following ac-
count balances: $65,000 for both cash and common stock. Boat 25 was started on February 10
and finished on May 31. To build the boat, Ferguson had incurred cash costs of $5,100 for labor
and $4,350 for materials. During the same period, Ferguson paid $6,600 cash for actual manu-
facturing overhead costs. The company expects to incur $175,500 of indirect overhead cost dur-
ing 2012. The overhead is allocated to jobs based on direct labor cost. The expected total labor
cost for the year is $135,000.
edm10890_ch12_534-585.indd Page 563 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 563

Ferguson uses a just-in-time inventory management system. Consequently, it does not have
raw materials inventory. Raw materials purchases are recorded directly in the Work in Process
Inventory account.
Required
a. Use the horizontal financial statements model, as illustrated here, to record Fergusons business
events. The first row shows beginning balances.

Assets 5 Equity

Work in Finished Manuf. Com. Ret.

Cash 1 Process 1 Goods 1 Overhead 5 Stock 1 Ear. Rev. 2 Exp. 5 Net Inc.

65,000 1 NA 1 NA 1 NA 5 65,000 1 NA NA 2 NA 5 NA

b. If Ferguson desires to earn a profit equal to 20 percent of cost, for what price should it sell
the boat?
c. If the boat is not sold by year-end, what amount would appear in the Work in Process
Inventory and Finished Goods Inventory on the balance sheet for Boat 25?
d. Is the amount of inventory you calculated in Requirement c the actual or the estimated cost
of the boat?
e. When is it appropriate to use estimated inventory cost on a year-end balance sheet?

Exercise 12-5A Job-order costing in a manufacturing company LO 3

Keeney Corporation makes custom-order furniture to meet the needs of disabled persons. On
January 1, 2011, the company had the following account balances: $90,000 for both cash and
common stock. In 2011, Keeney worked on three jobs. The relevant direct operating costs follow.

Direct Labor Direct Materials

Job 1 $ 4,000 $4,500
Job 2 2,800 1,400
Job 3 8,200 3,600
Total $15,000 $9,500

Keeneys predetermined manufacturing overhead rate was $0.40 per direct labor dollar.
Actual manufacturing overhead costs amounted to $5,758. Keeney paid cash for all costs. The
company completed and delivered Jobs 1 and 2 to customers during the year. Job 3 was incom-
plete at the end of the year. The company sold Job 1 for $16,000 cash and Job 2 for $7,800
cash. Keeney also paid $3,000 cash for selling and administrative expenses for the year.
Keeney uses a just-in-time inventory management system. Consequently, it does not have
raw materials inventory. Raw materials purchases are recorded directly in the Work in Process
Inventory account.
Required
a. Record the preceding events in a horizontal statements model. The first row shows beginning
balances.

Assets 5 Equity

Work in Finished Manuf. Com. Ret.

Cash 1 Process 1 Goods 1 Overhead 5 Stock 1 Ear. Rev. 2 Exp. 5 Net Inc.

90,000 1 NA 1 NA 1 NA 5 90,000 1 NA NA 2 NA 5 NA
edm10890_ch12_534-585.indd Page 564 7/27/10 5:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
564 Chapter 12

b. Record the entry to close the amount of underapplied or overapplied overhead for the year to
Cost of Goods Sold (in the expense category) in the horizontal financial statements model.
c. Determine the gross margin for the year.

LO 3 Exercise 12-6A Job-order costing in a service company

Bailes Condos Corporation is a small company owned by Ray Miller. It leases three condos of
differing sizes to customers as vacation facilities. Labor costs for each condo consist of maid
service and maintenance cost. Other direct operating costs consist of interest and depreciation.
The direct operating costs for each condo follow.

Other Direct
Direct Labor Operating Costs
Condo 1 $16,200 $37,800
Condo 2 18,600 42,000
Condo 3 22,500 57,000
Total $ 5,730 $13,680

Indirect operating expenses, which amounted to $41,040, are allocated to the condos in pro-
portion to the amount of other direct operating costs incurred for each.
Required
a. Assuming that the amount of rent revenue from Condo 2 is $96,000, what amount of income
did it earn?
b. Based on the preceding information, will the company show finished goods inventory on its
balance sheet? If so, what is the amount of this inventory? If not, explain why not.

LO 3 Exercise 12-7A Job-order costing system

The following information applies to Job 730 completed by Porthro Manufacturing Company
during October 2010. The amount of labor cost for the job was $81,000. Applied overhead
amounted to $102,400. The project was completed and delivered to Rodewald Company at a
contract price of $314,000. Porthro recognized a gross profit of $54,400 on the job.
Required
Determine the amount of raw materials used to complete Job 730.

LO 5 Exercise 12-8A Process costing systemdetermine equivalent units

Sheridan Furniture Companys cutting department had 400 units in its beginning work in process
inventory. During the accounting period it began work on 1,200 units of product and had 600
partially complete units in its ending inventory.
Required
(Each requirement is independent of the others.)
a. Assuming the ending inventory units were 60 percent complete, determine the total number
of equivalent whole units (number transferred out plus number in ending inventory)
accounted for by the cutting department.
b. Assuming that the total number of equivalent whole units (number transferred out plus
number in ending inventory) accounted for by the cutting department was 1,240, what was
the ending inventory percentage of completion?

LO 5 Exercise 12-9A Cost allocation in a process system

McAlister Watches, Inc., makes watches. Its assembly department started the accounting period
with a beginning inventory balance of $22,000. During the accounting period, the department
incurred $43,500 of transferred-in cost, $21,000 of materials cost, $60,000 of labor cost, and
$67,000 of applied overhead cost. The department processed 6,100 total equivalent units of
product during the accounting period.
edm10890_ch12_534-585.indd Page 565 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 565

Required
(Each requirement is independent of the others.)
a. Assuming that 1,200 equivalent units of product were in the ending work in process inven-
tory, determine the amount of cost transferred out of the Work in Process Inventory account
of the assembly department to the Finished Goods Inventory account. What was the assem-
bly departments cost of ending work in process inventory?
b. Assuming that 5,600 units of product were transferred out of the assembly departments
work in process inventory to finished goods inventory, determine the amount of the assem-
bly departments cost of ending work in process inventory. What was the cost of the finished
goods inventory transferred out of the assembly department?

Exercise 12-10A Process costing systemdetermine equivalent units and allocate costs LO 5
Milwaukee Ski Company manufactures snow skis. During the most recent accounting period,
the companys finishing department transferred 4,200 sets of skis to finished goods. At the
end of the accounting period, 450 sets of skis were estimated to be 40 percent complete. Total
product costs for the finishing department amounted to $219,000.
Required
a. Determine the cost per equivalent.
b. Determine the cost of the goods transferred out of the finishing department.
c. Determine the cost of the finishing departments ending work in process inventory.

Exercise 12-11A Process costing system LO 5

Fancher Company is a cosmetics manufacturer. Its assembly department receives raw cosmet-
ics from the molding department. The assembly department places the raw cosmetics into deco-
rative containers and transfers them to the packaging department. The assembly departments
Work in Process Inventory account had a $62,000 balance as of August 1. During August, the
department incurred raw materials, labor, and overhead costs amounting to $72,000, $85,000,
and $80,000, respectively. The department transferred products that cost $342,000 to the packag-
ing department. The balance in the assembly departments Work in Process Inventory account as
of August 31 was $83,000.
Required
Determine the cost of raw cosmetics transferred from the molding department to the assembly
department during August.

Exercise 12-12A Selecting the appropriate costing system LO 1

Larrys Car Wash (LCW) offers customers three cleaning options. Under Option 1, only the ex-
terior is cleaned. With Option 2, the exterior and interior are cleaned. Option 3 provides exterior
waxing as well as exterior and interior cleaning. LCW completed 4,000 Option 1 cleanings, 5,200
Option 2 cleanings, and 3,200 Option 3 cleanings during 2012. The average cost of completing
each cleaning option and the price charged for it are shown here.

Option 1 Option 2 Option 3

Price charged $10 $12 $21
Costs of completing task 4 5 15

Required
a. Is LCW a manufacturing or a service company? Explain.
b. Which costing system, job-order or process, is most appropriate for LCW? Why?
c. What is the balance in LCWs Work in Process and Finished Goods Inventory accounts on
the December 31 balance sheet?
d. Speculate as to the major costs that LCW incurs to complete a cleaning job.
edm10890_ch12_534-585.indd Page 566 7/27/10 5:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
566 Chapter 12

PROBLEMSSERIES A
All Problems in Series A are available with McGraw-Hills
Connect Accounting.
LO 3 Problem 12-13A Job-order costing system
Baucom Manufacturing Corporation was started with the issuance of common stock for
$50,000. It purchased $7,000 of raw materials and worked on three job orders during 2012 for
which data follow. (Assume that all transactions are for cash unless otherwise indicated.)
CHECK FIGURE
d. COGM: $14,100
NI: $3,900 Direct Raw
Materials Used Direct Labor
Job 1 $1,000 $2,000
Job 2 2,000 4,000
Job 3 3,000 2,000
Total $6,000 $8,000

Factory overhead is applied using a predetermined overhead rate of $0.60 per direct labor dollar.
Jobs 2 and 3 were completed during the period and Job 3 was sold for $10,000 cash. Baucom
paid $400 for selling and administrative expenses. Actual factory overhead was $4,300.
Required
a. Record the preceding events in a horizontal statements model. The first event for 2012 has
been recorded as an example.

Assets 5 Equity

Cash 1 Raw M. 1 MOH 1 WIP 1 F. Goods 5 C. Stk. 1 Ret. Ear. Rev. 2 Exp. 5 Net Inc.

$50,000 1 NA 1 NA 1 NA 1 NA 5 $50,000 1 NA NA 2 NA 5 NA

b. Reconcile all subsidiary accounts with their respective control accounts.

c. Record the closing entry for over- or underapplied manufacturing overhead in the horizontal
statements model, assuming that the amount is insignificant.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a bal-
ance sheet for 2012.

LO 3 Problem 12-14A Job-order costing system

CHECK FIGURES Fenske Construction Company began operations on January 1, 2012, when it acquired $10,000
d. COGM: $2,496
cash from the issuance of common stock. During the year, Fenske purchased $2,600 of direct
raw materials and used $2,400 of the direct materials. There were 108 hours of direct labor
Total Assets: $10,504
worked at an average rate of $8 per hour paid in cash. The predetermined overhead rate was
$3.00 per direct labor hour. The company started construction on three prefabricated buildings.
The job cost sheets reflected the following allocations of costs to each building.

Direct Materials Direct Labor Hours

Job 1 $ 600 30
Job 2 1,000 50
Job 3 800 28

The company paid $100 cash for indirect labor costs. Actual overhead cost paid in cash
other than indirect labor was $240. Fenske completed Jobs 1 and 2 and sold Job 1 for $1,600
cash. The company incurred $150 of selling and administrative expenses that were paid in cash.
Over- or underapplied overhead is closed to Cost of Goods Sold.
edm10890_ch12_534-585.indd Page 567 7/27/10 5:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 567

Required
a. Record the preceding events in a horizontal statements model. The first event for 2012 has
been recorded as an example.

Assets 5 Equity

Cash 1 Raw M. 1 MOH 1 WIP 1 F. Goods 5 C. Stk. 1 Ret. Ear. Rev. 2 Exp. 5 Net Inc.

10,000 1 NA 1 NA 1 NA 1 NA 5 10,000 1 NA NA 2 NA 5 NA

b. Reconcile all subsidiary accounts with their respective control accounts.

c. Record the closing entry for over- or underapplied manufacturing overhead in the horizontal
statements model, assuming that the amount is insignificant.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a
balance sheet for 2012.

Problem 12-15A Process costing system LO 4, 5

Alston Corporation makes rocking chairs. The chairs move through two departments during CHECK FIGURES
production. Lumber is cut into chair parts in the cutting department, which transfers the parts d. COGS: $36,800
to the assembly department for completion. The company sells the unfinished chairs to hobby Cash: $54,000
shops. The following transactions apply to Alstons operations for its first year, 2011. (Assume
that all transactions are for cash unless otherwise stated.)
1. The company was started when it acquired a $100,000 cash contribution from the owners.
2. The company purchased $30,000 of direct raw materials and $800 of indirect materials.
Indirect materials are capitalized in the Production Supplies account.
3. Direct materials totaling $12,000 were issued to the cutting department.
4. Labor cost was $56,400. Direct labor for the cutting and assembly departments was $20,000
and $26,000, respectively. Indirect labor costs were $10,400.
5. The predetermined overhead rate was $0.50 per direct labor dollar in each department.
6. Actual overhead costs other than indirect materials and indirect labor were $12,800 for
theyear.
7. The cutting department transferred $24,000 of inventory to the assembly department.
8. The assembly department transferred $40,000 of inventory to finished goods.
9. The company sold inventory costing $36,000 for $60,000.
10. Selling and administrative expenses were $6,000.
11. A physical count revealed $200 of production supplies on hand at the end of 2011.
12. Assume that over- or underapplied overhead is insignificant.

Required
a. Record the data in T-accounts.
b. Record the closing entry for over- or underapplied manufacturing overhead, assuming that
the amount is insignificant.
c. Close the revenue and expense accounts.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a
balance sheet for 2011.

Problem 12-16A Process costing system LO 4, 5

Use the ending balances from Problem 12-15A as the beginning balances for this problem. The CHECK FIGURES
transactions for the second year of operation (2012) are described here. (Assume that all transac- d. NI: $21,800
tions are cash transactions unless otherwise indicated.) Cash: $6,700
1. The company purchased $40,000 of direct raw materials and $1,300 of indirect materials.
Indirect materials are capitalized in the Production Supplies account.
2. Materials totaling $13,400 were issued to the cutting department.
edm10890_ch12_534-585.indd Page 568 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
568 Chapter 12

3. Labor cost was $47,000. Direct labor for the cutting and assembly departments was $22,000
and $20,000, respectively. Indirect labor costs were $5,000. (Note: Assume that sufficient
cash is available when periodic payments are made. These amounts represent summary data
for the entire year and are not presented in exact order of collection and payment.)
4. The predetermined overhead rate was $0.50 per direct labor dollar in each department.
5. Actual overhead costs other than indirect materials and indirect labor for the month were
$14,600.
6. The cutting department transferred $30,000 of inventory to the assembly department.
7. The assembly department transferred $60,000 of inventory to finished goods.
8. The company sold inventory costing $34,000 for $64,000.
9. Selling and administrative expenses were $8,400.
10. At the end of 2012, $300 of production supplies was on hand.
11. Assume that over- or underapplied overhead is insignificant.

Required
a. Record the data in T-accounts.
b. Record the closing entry for over- or underapplied manufacturing overhead, assuming that
the amount is insignificant.
c. Close the revenue and expense accounts.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a
balance sheet for 2012.

LO 5 Problem 12-17A Process costing system cost of production report

Burris Company had 250 units of product in its work in process inventory at the beginning of the
period and started 2,000 additional units during the period. At the end of the period, 750 units
CHECK FIGURE were in work in process inventory. The ending work in process inventory was estimated to be
b. $33.80 40percent complete. The cost of work in process inventory at the beginning of the period was
$6,840, and $54,000 of product costs was added during the period.

Required
Prepare a cost of production report showing the following.
a. The number of equivalent units of production.
b. The product cost per equivalent unit.
c. The total cost allocated between the ending Work in Process Inventory and Finished Goods
Inventory accounts.

LO 5 Problem 12-18A Determining inventory cost using a process costing system

CHECK FIGURE Espinoza Company had 200 units of product in work in process inventory at the beginning of
b. $60 the period. It started 1,400 units during the period and transferred 1,200 units to finished goods
inventory. The ending work in process inventory was estimated to be 70 percent complete. Cost
data for the period follow.

Product Costs

Beginning balance $31,600

Added during period 57,200
Total $88,800

Required
Prepare a cost of production report showing the following.
a. The number of equivalent units of production.
b. The product cost per equivalent unit.
c. The total cost allocated between ending work in process inventory and finished goods inventory.
edm10890_ch12_534-585.indd Page 569 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 569

Problem 12-19A Process costing system LO 5

Rockwall Plastic Products Company makes a plastic toy using two departments, parts and CHECK FIGURE
assembly. The following data pertain to the parts departments transactions in 2011. b. $49.50
1. The beginning balance in the Work in Process Inventory account was $11,400. This inventory
consisted of parts for 1,000 toys. The beginning balances in the Raw Materials Inventory,
Production Supplies, and Cash accounts were $128,000, $2,000, and $400,000, respectively.
2. Direct materials costing $104,000 were issued to the parts department. The materials were
sufficient to make 5,000 additional toys.
3. Direct labor cost was $94,000, and indirect labor costs are $9,200. All labor costs were paid
in cash.
4. The predetermined overhead rate was $0.30 per direct labor dollar.
5. Actual overhead costs other than indirect materials and indirect labor for the year were
$19,000, which was paid in cash.
6. The parts department completed work for 4,500 toys. The remaining toy parts were 20 per-
cent complete. The completed parts were transferred to the assembly department.
7. All of the production supplies had been used by the end of 2011.
8. Over- or underapplied overhead was closed to the Cost of Goods Sold account.

Required
a. Determine the number of equivalent units of production.
b. Determine the product cost per equivalent unit.
c. Allocate the total cost between the ending work in process inventory and parts transferred to
the assembly department.
d. Record the transactions in a partial set of T-accounts.

Problem 12-20A Process costing system LO 5

Zest Cola Corporation produces a new soft drink brand, Sweet Spring, using two production
departments, mixing and bottling. Zests beginning balances and data pertinent to the mixing
departments activities for 2011 follow. CHECK FIGURE
b. $0.14
Accounts Beginning Balances

Cash $ 45,000
Raw materials inventory 14,800
Production supplies 100
Work in process inventory (400,000 units) 48,000
Common stock 107,900

1. Zest Cola issued additional common stock for $54,000 cash.

2. The company purchased raw materials and production supplies for $29,600 and $800,
respectively, in cash.
3. The company issued $32,360 of raw materials to the mixing department for the production
of 800,000 units of Sweet Spring that were started in 2011. A unit of soft drink is the amount
needed to fill a bottle.
4. The mixing department used 2,400 hours of labor during 2011, consisting of 2,200 hours for
direct labor and 200 hours for indirect labor. The average wage was $9.60 per hour. All wages
were paid in 2011 in cash.
5. The predetermined overhead rate was $1.60 per direct labor hour.
6. Actual overhead costs other than indirect materials and indirect labor for the year amounted
to $1,260, which was paid in cash.
7. The mixing department completed 600,000 units of Sweet Spring. The remaining inventory
was 25 percent complete.
8. The completed soft drink was transferred to the bottling department.
9. The ending balance in the Production Supplies account was $560.
edm10890_ch12_534-585.indd Page 570 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
570 Chapter 12

Required
a. Determine the number of equivalent units of production.
b. Determine the product cost per equivalent unit.
c. Allocate the total cost between the ending work in process inventory and units transferred to
the bottling department.
d. Record the transactions in T-accounts.

LO 4, 5 Problem 12-21A Process costing system with second department

CHECK FIGURES Reed Corporation makes a health beverage named Reed that is manufactured in a two-stage
a. Cost/unit: $1.00 production process. The drink is first created in the Conversion Department where material
b. Cost/unit: $1.60 ingredients (natural juices, supplements, preservatives, etc.) are combined. On July 1, 2011,
the company had a sufficient quantity of partially completed beverage mix in the Conversion
Department to make 40,000 containers of Reed. This beginning inventory had a cost of
$30,000. During July, the company added ingredients necessary to make 160,000 containers
of Reed. The cost of these ingredients was $154,000. During July, liquid mix representing
180,000 containers of the beverage was transferred to the Finishing Department. The bever-
age mix is poured into containers and packaged for shipment in the Finishing Department.
Beverage that remained in the Conversion Department at the end of July was 20 percent com-
plete. At the beginning of July the Finishing Department had 10,000 containers of beverage
mix. The cost of this mix was $24,000. The department added $44,000 of manufacturing
costs (materials, labor and overhead) during July. During July, 120,000 containers of Reed
were completed. The ending inventory for this department was 50 percent complete at the end
of July.
Required
a. Prepare a Cost of Production Report for the Conversion Department for July.
b. Prepare a Cost of Production Report for the Finishing Department for July.
c. If 100,000 containers of Reed are sold in July for $240,000, determine the companys gross
margin for July.

EXERCISESSERIES B
LO 1 Exercise 12-1B Matching products with appropriate costing systems
Required
Indicate which costing system (job-order, process, or hybrid) would be most appropriate for the
type of product listed in the left-hand column. The first item is shown as an example.

Type of Product Type of Costing System

a. Shoes Process
b. Treadmill
c. Textbook
d. House
e. Oil
f. Luxury yacht
g. Special-order personal computer
h. Over-the-counter personal computer
i. Mouse pad for a computer
j. Aircraft carrier
k. Makeup sponge
l. Handheld video game player
m. Generic coffee mug
n. Personalized coffee mug
o. Surgery
p. Audit engagement
edm10890_ch12_534-585.indd Page 571 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 571

Exercise 12-2B Identifying the appropriate costing system LO 1

Dahl Corporations Morgan Plant in Jacksoville, Florida, produces the companys weed-control
chemical solution, Weed Terminator. Production begins with pure water from a controlled
stream to which the plant adds different chemicals in the production process. Finally, the plant
bottles the resulting chemical solution. The process is highly automated with different
computer-controlled maneuvers and testing to ensure the quality of the end product. With only 15
employees, the plant can produce up to 6,000 bottles per day.

Required
Recommend the type of costing system (job-order, process, or hybrid) Morgan Plant should use.
Explain your recommendation.

Exercise 12-3B Job-order or process costing LO 1, 2

Jayne Allen, an artist, plans to make her living drawing customer portraits at a stand in Under-
ground Atlanta. She will carry her drawing equipment and supplies to work each day in bags. By
displaying two of her best hand-drawn portraits on either side of her stand, she expects to attract
tourists attention. Ms. Allen can usually draw a customers portrait in 30 minutes. Her materials
cost is minimal, about $2 for a portrait. Her most significant cost will be leasing the stand for
$1,200 per month. She estimates she can replace supplies and worn out equipment for $50 per
month. She plans to work 20 days each month from noon to 9:00 P.M. After surveying her
planned work environment before beginning the business, she observed that six other artists were
providing customer portraits in that section of Underground Atlanta. Their portrait prices
ranged from $25 to $45 per portrait. They also offered to frame portraits for customers at $15
per frame. Ms. Allen found that she could obtain comparable frames for $5 each and that prop-
erly framing a portrait takes about 10 minutes. The biggest challenge, Ms. Allen observed, was
attracting tourists interest. If she could draw portraits continuously during her workdays, she
could earn quite a respectable income. But she noticed several of the artists were reading maga-
zines as she walked by.

Required
a. Should Ms. Allen use a job-order or process costing system for her art business?
b. List the individual types of costs Ms. Allen will likely incur in providing portraits.
c. How could Ms. Allen estimate her overhead rate per portrait when she does not know the
number of portraits she will draw in a month?
d. Ms. Allen will not hire any employees. Will she have labor cost? Explain.

Exercise 12-4B Job-order costing in a manufacturing company LO 3

Popejoy Drapery, Inc., specializes in making custom draperies for both commercial and residen-
tial customers. It began business on August 1, 2011, by acquiring $48,000 cash through issuing
common stock. In August 2011, Popejoy accepted drapery orders, Jobs 801 and 802, for two new
commercial buildings. The company paid cash for the following costs related to the orders:

Job 801
Raw materials $ 8,000
Direct labor (512 hours at $20 per hour) 10,240
Job 802
Raw materials 6,000
Direct labor (340 hours at $20 per hour) 6,800

During the same month, Popejoy paid $14,400 for various indirect costs such as utilities,
equipment leases, and factory-related insurance. The company estimated its annual manufactur-
ing overhead cost would be $240,000 and expected to use 20,000 direct labor hours in its first
year of operation. It planned to allocate overhead based on direct labor hours. On August 31,
2011, Popejoy completed Job 801 and collected the contract price of $28,000. Job 802 was still
in process.
edm10890_ch12_534-585.indd Page 572 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
572 Chapter 12

Popejoy uses a just-in-time inventory management system. Consequently, it has no raw

materials inventory. Raw materials purchases are recorded directly in the Work in Process
Inventory account.

Required
a. Use a horizontal financial statements model as follows to record Popejoys accounting events
for August 2011. The first event is shown as an example.

Assets 5 Equity

Work in Finished Manuf. Com. Ret.

Cash 1 Process 1 Goods 1 Overhead 5 Stock 1 Ear. Rev. 2 Exp. 5 Net Inc.

48,000 1 NA 1 NA 1 NA 5 48,000 1 NA NA 2 NA 5 NA

b. What was Popejoys ending inventory on August 31, 2011? Is this amount the actual or the
estimated inventory cost?
c. When is it appropriate to use estimated inventory cost on a year-end balance sheet?

LO 3 Exercise 12-5B Job-order costing in a manufacturing company

Agu Advertisements Corporation designs and produces television commercials for clients. On
March 1, 2012, the company issued common stock for $75,000 cash. During March, Agu worked
on three jobs. Pertinent data follow.

Special Orders Materials Labor

Job 301 $3,600 450 hours @ $32 per hour

Job 302 6,480 360 hours @ $60 per hour
Job 303 5,840 680 hours @ $28 per hour

Actual production overhead cost: $24,080

Predetermined overhead rate: $16 per direct labor hour
Agu paid these costs in cash. Jobs 301 and 302 were completed and sold for cash to custom-
ers during March. Job 303 was incomplete at month end. Job 301 sold for $32,000, and Job 302
sold for $45,000. Agu also paid $8,000 cash in March for selling and administrative expenses.
Agu uses a just-in-time inventory management system. Consequently, it has no raw materi-
als inventory. Raw materials purchases are recorded directly in the Work in Process Inventory
account.

Required
a. Use a horizontal financial statements model, as follows, to record Agus accounting events
for March 2012. The first event is shown as an example.

Assets 5 Equity

Work in Finished Manuf. Com. Ret.

Cash 1 Process 1 Goods 1 Overhead 5 Stock 1 Ear. Rev. 2 Exp. 5 Net Inc.

75,000 1 NA 1 NA 1 NA 5 75,000 1 NA NA 2 NA 5 NA
edm10890_ch12_534-585.indd Page 573 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 573

b. Record the entry to close the amount of underapplied or overapplied manufacturing

overhead to Cost of Goods Sold (in the expense category) in the horizontal financial
statements model.
c. Determine the gross margin for March.

Exercise 12-6B Job-order costing in a service company LO 3

Navasota Consulting provides financial and estate planning services on a retainer basis for the
executive officers of its corporate clients. It incurred the following labor costs on services for
three corporate clients during March 2011.

Direct Labor

Contract 1 $14,000
Contract 2 7,200
Contract 3 28,800
Total $50,000

Navasota allocated March overhead costs of $22,000 to the contracts based on the amount of
direct labor costs incurred on each contract.

Required
a. Assuming the revenue from Contract 3 was $70,000, what amount of income did Navasota
earn from this contract?
b. Based on the preceding information, will Navasota report finished goods inventory on its bal-
ance sheet for Contract 1? If so, what is the amount of this inventory? If not, explain why not.

Exercise 12-7B Determine missing information for a job order LO 3

The following information pertains to Job 712 that Gillman Manufacturing Company completed
during January 2011. Materials and labor costs for the job were $70,000 and $38,000, respec-
tively. Applied overhead costs were $44,000. Gillman completed and delivered the job to its
customer and earned a $54,000 gross profit.

Required
Determine the contract price for the job.

Exercise 12-8B Process costing: determining equivalent units LO 5

In March 2011, Rite Corporations battery plant had 2,000 units in its beginning work in process
inventory. During March, the company added 18,000 units to production. At the end of the
month, 6,000 units of product were in process.

Required
(Each requirement is independent of the other.)
a. Assuming the ending inventory units were 60 percent complete, determine the total number
of equivalent units (number transferred out plus number in ending inventory) processed by
the battery plant.
b. Assuming the total number of equivalent units (number transferred out plus number in end-
ing inventory) processed by the battery plant was 15,500, what was the ending inventory
percentage of completion?

Exercise 12-9B Allocating costs in a process costing system LO 5

Duval Corporation, a manufacturer of diabetic testing kits, started November production with
$60,000 in beginning inventory. During the month, the company incurred $360,000 of materials
cost and $240,000 of labor cost. It applied $165,000 of overhead cost to inventory. The company
processed 15,000 total equivalent units of product.
edm10890_ch12_534-585.indd Page 574 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
574 Chapter 12

Required
(Each requirement is independent of the other.)
a. Assuming 4,000 equivalent units of product were in ending work in process inventory,
determine the amount of cost transferred from the Work in Process Inventory account to
the Finished Goods Inventory account. What was the cost of the ending work in process
inventory?
b. Assuming 12,000 equivalent units of product were transferred from work in process inven-
tory to finished goods inventory, determine the cost of the ending work in process inventory.
What was the cost of the finished goods inventory transferred from work in process?

LO 5 Exercise 12-10B Process costing: determining equivalent units and allocating costs
Bell Corporation, which makes suitcases, completed 30,000 suitcases in August 2011. At the end
of August, work in process inventory consisted of 5,000 suitcases estimated to be 40 percent
complete. Total product costs for August amounted to $480,000.

Required
a. Determine the cost per equivalent unit.
b. Determine the cost of the goods transferred to finished goods.
c. Determine the cost of the ending work in process inventory.

LO 5 Exercise 12-11B Process costing: supply missing information

Gospel Publications, Inc., produces Bibles in volume. It printed and sold 120,000 Bibles last
year. Demand is sufficient to support producing a particular edition continuously throughout
the year. For this operation, Gospel uses two departments, printing and binding. The printing
department prints all pages and transfers them to the binding department, where it binds the
pages into books. The binding departments Work in Process Inventory account had a $20,000
balance on September 1. During September, the binding department incurred raw materials,
labor, and overhead costs of $5,500, $19,000, and $35,500, respectively. During the month,
the binding department transferred Bibles that cost $175,000 to finished goods. The balance
in the binding departments Work in Process Inventory account as of September 30 was
$30,000.

Required
Determine the cost of pages transferred from the printing department to the binding department
during the month of September.

LO 1 Exercise 12-12B Selecting the appropriate costing system

Schroeder Automotive Specialties, Inc., has a successful market niche. It customizes automo-
bile interiors to fit the various needs of disabled customers. Some customers need special
equipment to accommodate disabled drivers. Others need modified entrance and seating ar-
rangements for disabled passengers. Customer vehicles vary according to different brands
and models of sedans, minivans, sport utility vehicles, and full-size vans. Schroeders engi-
neers interview customers directly to ascertain their special needs. The engineers then pro-
pose a design, explaining it and its cost for the customers approval. Customers have the
opportunity to request changes. Once the company and customer agree on an engineering
design and its price, they sign a contract, and the customers vehicle is delivered to Schroeders
factory. The factory manager directs mechanics to customize the vehicle according to the
engineering design.

Required
a. Is Schroeder a manufacturing company or a service company? Explain.
b. Which costing system, job-order or process, would be most appropriate for Schroeder? Why?
c. Does Schroeder have work in process and finished goods inventories?
d. Should Schroeder classify engineering design costs as materials, labor, or overhead? Why?
edm10890_ch12_534-585.indd Page 575 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 575

PROBLEMSSERIES B
Problem 12-13B Job-order costing system LO 3
Plano Corporation was created on January 1, 2011, when it received a stockholders contribu-
tion of $65,000. It purchased $7,900 of raw materials and worked on three job orders during
the year. Data about these jobs follow. (Assume all transactions are for cash unless otherwise
indicated.)

Direct Raw
Materials Used Direct Labor

Job 1 $2,500 $ 3,200

Job 2 1,800 4,800
Job 3 3,200 4,480
Total $7,500 $12,480

The average wage rate is $16 per hour. Manufacturing overhead is applied using a predeter-
mined overhead rate of $7.50 per direct labor hour. Jobs 1 and 3 were completed during the year,
and Job 1 was sold for $10,000. Plano paid $1,400 for selling and administrative expenses. Actual
factory overhead was $6,000.

Required
a. Record the preceding events in a horizontal statements model. The first event for 2011 has
been recorded as an example.

Assets 5 Equity

Cash 1 Raw M. 1 MOH 1 WIP 1 F. Goods 5 C. Stk. 1 Ret. Ear. Rev. 2 Exp. 5 Net Inc.

65,000 1 NA 1 NA 1 NA 1 NA 5 65,000 1 NA NA 2 NA 5 NA

b. Reconcile all subsidiary accounts with their respective control accounts.

c. Record the closing entry for over- or underapplied manufacturing overhead, assuming that
the amount is insignificant.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a bal-
ance sheet for 2011.

Problem 12-14B Job-order costing system LO 3

Presley Roofing Corporation was founded on January 1, 2012, when stockholders contributed
$5,000 for common stock. During the year, Presley purchased $2,400 of direct raw materials and
used $2,160 of direct materials. There were 80 hours of direct labor worked at an average rate of
$8 per hour paid in cash. The predetermined overhead rate was $6.50 per direct labor hour. The
company started three custom roofing jobs. The job cost sheets reflected the following alloca-
tions of costs to each.

Direct Materials Direct Labor Hours

Roof 1 $800 20
Roof 2 400 12
Roof 3 960 48
edm10890_ch12_534-585.indd Page 576 7/27/10 5:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
576 Chapter 12

The company paid $176 cash for indirect labor costs and $240 cash for production sup-
plies, which were all used during 2012. Actual overhead cost paid in cash other than indirect
materials and indirect labor was $144. Presley completed Roofs 1 and 2 and collected the
contract price for Roof 1 of $2,160 cash. The company incurred $496 of selling and adminis-
trative expenses that were paid with cash. Over- or underapplied overhead is closed to Cost of
Goods Sold.

Required
a. Record the preceding events in a horizontal statements model. The first event for 2012 has
been recorded as an example.

Assets 5 Equity

Cash 1 Raw M. 1 MOH 1 WIP 1 F. Goods 5 C. Stk. 1 Ret. Ear. Rev. 2 Exp. 5 Net Inc.

5,000 1 NA 1 NA 1 NA 1 NA 5 5,000 1 NA NA 2 NA 5 NA

b. Reconcile all subsidiary accounts with their respective control accounts.

c. Record the closing entry for over- or underapplied manufacturing overhead in the horizontal
statements model, assuming that the amount is insignificant.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a bal-
ance sheet for 2012.

LO 4, 5 Problem 12-15B Process costing system

Whitaker Food Company makes frozen vegetables. Production involves two departments, pro-
cessing and packaging. Raw materials are cleaned and cut in the processing department and then
transferred to the packaging department where they are packaged and frozen. The following
transactions apply to Whitakers first year (2011) of operations. (Assume that all transactions are
for cash unless otherwise stated.)
1. The company was started when it acquired $100,000 cash from the issue of common stock.
2. Whitaker purchased $48,000 of direct raw materials and $8,000 of indirect materials.
Indirect materials are capitalized in the Production Supplies account.
3. Direct materials totaling $38,000 were issued to the processing department.
4. Labor cost was $77,000. Direct labor for the processing and packaging departments was
$32,500 and $25,500, respectively. Indirect labor costs were $19,000.
5. The predetermined overhead rate was $0.80 per direct labor dollar in each department.
6. Actual overhead costs other than indirect materials and indirect labor were $22,500 for
the year.
7. The processing department transferred $60,500 of inventory to the packaging department.
8. The packaging department transferred $70,000 of inventory to finished goods.
9. The company sold inventory costing $63,000 for $117,500.
10. Selling and administrative expenses were $23,500.
11. A physical count revealed $3,000 of production supplies on hand at the end of 2011.
12. Assume that over- or underapplied overhead is insignificant.

Required
a. Record the data in T-accounts.
b. Record the closing entry for over- or underapplied manufacturing overhead, assuming that
the amount is insignificant.
c. Close the revenue and expense accounts.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a bal-
ance sheet for 2011.
edm10890_ch12_534-585.indd Page 577 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 577

Problem 12-16B Process costing system LO 4, 5

Use the ending balances from Problem 12-15B as the beginning balances for this problem. The
transactions for the second year of operation (2012) are described here. (Assume that all transac-
tions are cash transactions unless otherwise indicated.)
1. The company purchased $51,000 of direct raw materials and $9,000 of indirect materials.
Indirect materials are capitalized in the Production Supplies account.
2. Materials costing $41,000 were issued to the processing department.
3. Labor cost was $89,500. Direct labor for the processing and packaging departments was
$36,000 and $29,500, respectively. Indirect labor costs were $24,000. (Note: Assume that suf-
ficient cash is available when periodic payments are made. These amounts represent sum-
mary data for the entire year and are not presented in exact order of collection and payment.)
4. The predetermined overhead rate was $0.80 per direct labor dollar.
5. Actual overhead costs other than indirect materials and indirect labor for the year were
$25,000.
6. The processing department transferred $125,000 of inventory to the packaging department.
7. The packaging department transferred $175,000 of inventory to finished goods.
8. The company sold inventory costing $171,000 for $325,000.
9. Selling and administrative expenses amounted to $32,000.
10. At the end of the year, $2,500 of production supplies was on hand.
11. Assume that over- or underapplied overhead is insignificant.
Required
a. Record the data in T-accounts.
b. Record the closing entry for over- or underapplied manufacturing overhead, assuming that
the amount is insignificant.
c. Close the revenue and expense accounts.
d. Prepare a schedule of cost of goods manufactured and sold, an income statement, and a bal-
ance sheet for 2012.

Problem 12-17B Process costing system cost of production report LO 5

At the beginning of 2012, Lingua Company had 2,500 units of product in its work in process in-
ventory, and it started 22,500 additional units of product during the year. At the end of the year,
6,000 units of product were in the work in process inventory. The ending work in process inven-
tory was estimated to be 25 percent complete. The cost of work in process inventory at the begin-
ning of the period was $10,000, and $154,000 of product costs was added during the period.
Required
Prepare a cost of production report showing the following.
a. The number of equivalent units of production.
b. The product cost per equivalent unit.
c. The total cost allocated between the ending Work in Process Inventory and Finished Goods
Inventory accounts.

Problem 12-18B Determining inventory cost using process costing LO 5

Ash Companys beginning work in process inventory consisted of 6,000 units of product on
January 1, 2011. During 2011, the company started 24,000 units of product and transferred
25,000 units to finished goods inventory. The ending work in process inventory was estimated to
be 40 percent complete. Cost data for 2011 follow.

Product Costs

Beginning balance $ 12,000

Added during period 123,000
Total $135,000
edm10890_ch12_534-585.indd Page 578 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
578 Chapter 12

Required
Prepare a cost of production report showing the following.
a. The number of equivalent units of production.
b. The product cost per equivalent unit.
c. The total cost allocated between ending work in process inventory and finished goods inventory.

LO 5 Problem 12-19B Process costing system

Burdorf Corporation makes blue jeans. Its process involves two departments, cutting and sew-
ing. The following data pertain to the cutting departments transactions in 2011.
1. The beginning balance in work in process inventory was $8,772. This inventory consisted of
fabric for 6,000 pairs of jeans. The beginning balances in raw materials inventory, production
supplies, and cash were $45,000, $2,100, and $135,600, respectively.
2. Direct materials costing $28,068 were issued to the cutting department; this amount of ma-
terials was sufficient to start work on 15,000 pairs of jeans.
3. Direct labor cost was $33,600, and indirect labor cost was $2,700. All labor costs were paid
in cash.
4. The predetermined overhead rate was $0.25 per direct labor dollar.
5. Actual overhead costs other than indirect materials and indirect labor for the year amounted
to $3,840, which was paid in cash.
6. The cutting department completed cutting 16,000 pairs of jeans. The remaining jeans were
40 percent complete.
7. The completed units of cut fabric were transferred to the sewing department.
8. All of the production supplies had been used by the end of the year.
9. Over- or underapplied overhead was closed to the Cost of Goods Sold account.

Required
a. Determine the number of equivalent units of production.
b. Determine the product cost per equivalent unit.
c. Allocate the total cost between ending work in process inventory and units transferred to the
sewing department.
d. Record the transactions in a partial set of T-accounts.

LO 5 Problem 12-20B Process costing system

Seguin Paper Products Corporation produces paper cups using two production departments,
printing and forming. Beginning balances and printing department data for 2011 follow.

Accounts Beginning Balances

Cash $50,000
Raw materials 22,000
Production supplies 1,500
Work in process inventory (300,000 units) 17,000
Common stock 90,500

1. Seguin Paper Products issued additional common stock for $110,000 cash.
2. The company purchased raw materials and production supplies for $40,000 and $3,500, re-
spectively, in cash.
3. The company issued $57,000 of raw materials and $3,600 of production supplies to the
printing department for the production of 800,000 paper cups.
4. The printing department used 6,200 hours of labor during 2011, consisting of 5,600 hours
for direct labor and 600 hours for indirect labor. The average wage was $10 per hour. All the
wages were paid in 2011 in cash.
edm10890_ch12_534-585.indd Page 579 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 579

5. The predetermined overhead rate was $0.25 per direct labor dollar.
6. Actual overhead costs other than indirect materials and indirect labor for the year amounted
to $4,400, which was paid in cash.
7. The printing department completed 700,000 paper cups. The remaining cups were 50 percent
complete.
8. The completed paper cups were transferred to the forming department.
9. The ending balance in the Production Supplies account was $1,400.

Required
a. Determine the number of equivalent units of production.
b. Determine the product cost per equivalent unit.
c. Allocate the total cost between the ending work in process inventory and units transferred to
the forming department.
d. Record the transactions in T-accounts.

Problem 12-21B Process costing system with second department LO 4, 5

Shin Gifts makes unique western gifts that are sold at souvenir shops. One of the companys
more popular products is a ceramic eagle that is produced in a mass production process that en-
tails two manufacturing stages. In the first production stage ceramic glass is heated and molded
into the shape of the eagle by the Compression Department. Finally, color and artistic detail is
applied to the eagle by the Finishing Department. The company has just hired a new accountant
who will be responsible for preparing the Cost of Production Report for June 2011. The accoun-
tant is given the following information from which to prepare his report.
Departmental Cost Information for June:

Compression Finishing

Costs in beginning inventory $ 3,000 $14,400

Costs added during June:
Materials 42,000 18,120
Labor 20,000 13,200
Overhead 90,000 62,000

Departmental Product Information for June:

Compression Finishing

Units in beginning inventory 10,000 3,600

Units started 52,000 46,000
Units in ending inventory 16,000 (25% complete) 9,600 (80% complete)

Required
a. Prepare a Cost of Production Report for the Compression Department for June.
b. Prepare a Cost of Production Report for the Finishing Department for June.
c. If 24,000 units are sold in June for $160,000, determine the companys gross margin for June.

ANALYZE, THINK, COMMUNICATE

ATC 12-1 Business Application Case Comprehensive job-order costing problem
This problem covers concepts that were presented in Chapters 11 and 12 concerning job-order
costing systems.
Mid-Life Motorcycles (MLM) is a small shop that builds customized motorcycles, mostly
for middle-aged men with significant discretionary income, who are hoping to fulfill a high-
school dream. Since it works with high-end clients, all of its work is custom, and it makes
edm10890_ch12_534-585.indd Page 580 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
580 Chapter 12

many of the bike parts, including the frames, in-house. Other parts, such as the engine, are
purchased from outside suppliers and then modified in-house. Although most of its bikes are
created to-order for a specific individual, the shop occasionally builds a bike with no prear-
ranged buyer. These bikes are sometimes intended to be entered in custom-bike contest and
then sold afterwards.
The shop has been in existence for 10 years, but for the sake of simplicity, assume it has no
beginning inventories for 2011. Five motorcycle projects were worked on during 2011. By the end
of the year, four of these projects were completed and three of these four were sold.
The following selected data are from MLMs 2011 budget:

Advertising $ 5,000
Direct materials 150,000
Direct labor 130,000
Rent on office space 6,000
Rent on factory space 20,000
Indirect materials 11,000
Maintenance costs for factory equipment 3,000
Utilities costs for office space 1,000
Utilities costs for factory space 2,000
Depreciation on factory equipment 8,000
Machine hours expected to be worked 4,000
Direct labor hours expected to be worked 6,500

The following information relates to production events during 2011.

Raw materials were purchased for $155,000.
Materials used in production totaled $150,800; $11,500 of these were considered indirect
materials costs. The remaining $139,300 of direct materials costs related to individual
restoration jobs as follows:

Job Number Direct Materials Cost

115 $28,200
116 32,100
117 25,800
118 31,700
119 21,500

Labor costs incurred for production totaled $133,100. The workers are highly skilled crafts-
men who require little supervision. Therefore all of these were considered direct labor costs
and related to individual restoration jobs as follows:

Job Number Direct Labor Cost

115 $30,900
116 29,300
117 22,100
118 36,600
119 14,200

Paid factory rent of $18,000.

Recorded depreciation on factory equipment of $8,500.
Made $2,500 of payments to outside vendors for maintenance of factory equipment.
Paid factory utilities costs of $2,400.
edm10890_ch12_534-585.indd Page 581 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 581

Applied manufacturing overhead using a predetermined rate of $11.00 per machine hour.
The 3,750 machine hours that were used relate to each job as follows:

Job Number Machine Hours Worked

115 850
116 720
117 870
118 900
119 410

Completed all restoration jobs except 119 and transferred the projects to finished goods.
Sold three jobs for the following amounts:

Job Number Sales Price

115 $88,900
116 $93,000
117 $74,800

Closed the Manufacturing Overhead account to transfer any overapplied or underapplied

overhead to the Cost of Goods Sold account.

Required
a. Assume MLM had used direct labor hours (versus machine hours) as its cost driver. Compute
its predetermined overhead rate.
b. Determine the ending balance in Raw Materials Inventory.
c. Determine the ending balance in Finished Goods Inventory.
d. Determine the ending balance in Work in Process Inventory.
e. Determine the costs of goods manufactured.
f. Determine the amount of Cost of Goods Sold.
g. Determine the amount of gross margin that was earned on Jobs 115, 116, and 117.
h. Determine the amount of overapplied or underapplied overhead the existed at the end of
the year.
Hint: Though not required, you might find it helpful to organize the data using a horizontal
financial statements model, although it will still be necessary to prepare job cost sheet for each
individual job.

ATC 12-2 Group Assignment Job-order costing system

Bowen Bridge Company constructs bridges for the State of Kentucky. During 2010, Bowen
started work on three bridges. The cost of materials and labor for each bridge follows.

Special Orders Materials Labor

Bridge 305 $407,200 $352,700

Bridge 306 362,300 375,000
Bridge 307 801,700 922,800

The predetermined overhead rate is $1.20 per direct labor dollar. Actual overhead costs
were $2,170,800. Bridge 306 was completed for a contract price of $1,357,000 and was
turned over to the state. Construction on Bridge 305 was also completed but the state
edm10890_ch12_534-585.indd Page 582 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
582 Chapter 12

had not yet finished its inspection process. General selling and administrative expenses
amounted to $210,000. Over- or underapplied overhead is closed directly to the Cost of
Goods Sold account. The company recognizes revenue when it turns over a completed bridge
to a customer.

Required
a. Divide the class into groups of four or five students each and organize the groups into three
sections. Assign Task 1 to the first section of groups, Task 2 to the second section, and Task 3
to the third section.

Group Tasks
(1) Determine the cost of construction for Bridge 305.
(2) Determine the cost of construction for Bridge 306.
(3) Determine the cost of construction for Bridge 307.
b. Select a spokesperson from each section. Use input from the three spokespersons to prepare
an income statement and the asset section of the balance sheet.
c. Does the net income accurately reflect the profitability associated with Bridge 306? Explain.
d. Would converting to a process costing system improve the accuracy of the amount of reported
net income? Explain.

ATC 12-3 Research Assignment Identifying appropriate product costing systems

for three real world companies
Obtain the Form 10-Ks for these three companies: AGCO Corporation, Crown Holdings, Inc.,
and Noble Corporation. To obtain the Form 10-Ks you can use either the EDGAR system
following the instructions in Appendix A, or they can be found on the companies websites:
www.agcocorp.com (Investors), www.crowncork.com (For Investors), and www.noblecorp.com
(Investor Relations). Read the Item 1. Business sections of their 10-Ks in order to understand
the nature of these companies businesses.

Required
For each company, determine if it primarily uses a job-order or process costing system to com-
pute the cost of the products or services it sells. Explain the rationale for your answer. If you
believe a company uses elements of both job-order and process costing systems, a hybrid system,
explain the rationale for that conclusion.

ATC 12-4 Writing Assignment Determining the proper costing system

Professor Julia Silverman received the following e-mail message.
I dont know if you remember me. I am Tim Wallace. I was in your introductory accounting
class a couple of years ago. I recently graduated and have just started my first real job. I remem-
ber you talking about job-order and process costing systems. I even looked the subject up in the
textbook you wrote. In that book, you say that a process costing system is used when a company
produces a single, homogeneous, high-volume, low-cost product. Well, the company I am work-
ing for makes T-shirts. All of the shirts are the same. They dont cost much, and we make nearly
a million of them every year. The only difference in any of the shirts is the label we sew in them.
We make the shirts for about 20 different companies. It seems to me that we should be using a
process costing system. Even so, our accounting people are using a job-order costing system.
Unfortunately, you didnt tell us what to do when the company we work for is screwed up. I need
some advice. Should I tell them they are using the wrong accounting system? I know I am new
around here, and I dont want to offend anybody, but if your book is right, the company would
be better off if it started using a process costing system. Some of these people around here didnt
go to college, and Im afraid they dont know what they are doing. I guess thats why they hired
someone with a degree. Am I right about this or what?
edm10890_ch12_534-585.indd Page 583 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 583

Required
Assume that you are Professor Silverman. Write a return e-mail responding to Mr. Wallaces
inquiry.

ATC 12-5 Ethical Dilemma Amount of equivalent units

Ren Alverez knew she was in over her head soon after she took the job. Even so, the opportu-
nity for promotion comes along rarely and she believed that she would grow into it.
Ms. Alverez is the cost accounting specialist assigned to the finishing department of Standard Tool
Company. Bill Sawyer, the manager of the finishing department, knows exactly what he is doing.
In each of the three years he has managed the department, the cost per unit of product trans-
ferred out of his Work in Process Inventory account has declined. His ability to control cost is
highly valued, and it is widely believed that he will be the successor to the plant manager, who is
being promoted to manufacturing vice president. One more good year would surely seal the deal
for Mr. Sawyer. It was little wonder that Ms. Alverez was uncomfortable in challenging Mr. Sawyers
estimate of the percentage of completion of the departments ending inventory. He contended
that the inventory was 60 percent complete, but she believed that it was only about 40 percent
complete.
After a brief altercation, Ms. Alverez agreed to sign off on Mr. Sawyers estimate. The truth
was that although she believed she was right, she did not know how to support her position.
Besides, Mr. Sawyer was about to be named plant manager, and she felt it unwise to challenge
such an important person.
The department had beginning inventory of 5,500 units of product and it started 94,500
units during the period. It transferred out 90,000 units during the period. Total transferred-in
and production cost for the period was $902,400. This amount included the cost in beginning
inventory plus additional costs incurred during the period. The target (standard) cost per unit
is $9.45.

Required
a. Determine the equivalent cost per unit, assuming that the ending inventory is considered to
be 40 percent complete.
b. Determine the equivalent cost per unit, assuming that the ending inventory is considered to
be 60 percent complete.
c. Comment on Mr. Sawyers motives for establishing the percentage of completion at 60 percent
rather than 40 percent.
d. Assuming that Ms. Alverez is a certified management accountant, would informing the chief
accountant of her dispute with Mr. Sawyer violate the confidentiality standards of ethical
conduct in Exhibit 1.15 of Chapter 1?
e. Did Ms. Alverez violate any of the standards of ethical conduct in Exhibit 1.15 of Chapter 1?
If so, which ones?
f. Discuss the components of the fraud triangle that affected Ms. Alverezs behavior.

ATC 12-6 Spreadsheet Assignment Using Excel

Lewis Company had 8,000 units of product in work in process inventory at the beginning of the
period and started 16,000 units during the period. At the end of the period, 4,000 units remained
in work in process. The ending work in process inventory was estimated to be 40 percent complete.
The cost of the units in beginning work in process inventory was $22,080. During the period,
$38,400 of product costs were added.

Required
a. Construct a spreadsheet that incorporates the preceding data into a table. The following
screen capture is an example.
b. Insert a section into the spreadsheet to calculate total manufacturing costs.
c. Insert a section into the spreadsheet to calculate equivalent units and cost per equivalent
unit.
edm10890_ch12_534-585.indd Page 584 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
584 Chapter 12

d. Insert a section into the spreadsheet to allocate the manufacturing costs between finished
goods and ending work in process.

Spreadsheet Tip
(1) The cells that contain numbers below row 7 should all be formulas so that changes to the
data in rows 3 to 6 will automatically be reflected in the rest of the spreadsheet.

ATC 12-7 Spreadsheet Assignment Mastering Excel

Refer to the job cost sheet in Exhibit 12.3.
Required
Construct a spreadsheet that recreates the job cost sheet in Exhibit 12.3. Use formulas wherever
possible, such as in the total row.

Spreadsheet Tips
(1) Center the headings for direct materials, direct labor, and applied overhead across two or
three columns by choosing Format and Cells and checking the Merge box under the
alignment tab. A shortcut to center these is to click on the Merge and Center icon in the
formatting tool bar.
(2) All lines in the job cost sheet can be drawn using Format and Cells and then choosing
the border tab.

COMPREHENSIVE PROBLEM
This is a continuation of the comprehensive problem in Chapter 11. During 2012, Anywhere,
Inc. (AI), incurred the following product costs.

Raw materials $62,000

Labor 89,422
Overhead 58,000
edm10890_ch12_534-585.indd Page 585 7/24/10 11:39 PM user-f497 /Volumes/105/PHS00142/work/indd

To download more slides, ebooks, solution manual, and test bank, visit http://downloadslide.blogspot.com
Job-Order, Process, and Hybrid Costing Systems 585

Recall that the 2011 ending balance in the Work in Process (WIP) account was $26,000. Ac-
cordingly, this is the beginning WIP balance for 2012. There were 110 units of product in begin-
ning WIP inventory. AI started 1,840 units of product during 2012. Ending WIP inventory
consisted of 90 units that were 60 percent complete.
Required
Prepare a cost of production report by filling in the cells that contain question marks.

Equivalent Unit Computations

Equivalent
Units % Complete Units

Beginning inventory 110

Units started 1,840
Total units available for completion ?
Units in ending inventory (90) ? ?
Units complete 1,860 100% ?
Total equivalent units 1,914

Cost per Equivalent Unit

Cost 4 Units 5 Cost Per Unit

Beginning inventory $26,000

Raw materials ?
Labor ?
Overhead 58,000
Total product cost ? 4 1,914 5 ?

Allocation of Product Cost

Cost transferred to finished goods ?
Cost in ending inventory ?
Total product cost $235,422