4-Bolt Flange

FluidConnectors Connections

The Fitting Authority

4300 Catalog 4-Bolt Flange Connections
Visual Index

LOEQ1 LOEQ2 LOHQ1 LOHQ2 LOVQ1

Code 61 Flange Code 62 Flange Code 61 Code 62 Code 61 Flange
Elbow Elbow Flange Connector Flange Connector 45 Elbow
Seal-Lok
Flange
Adapters
Page J11 Page J11 Page J12 Page J12 Page J13
LOVQ2 XHQ1 XHQ2 XEQ1 XEQ2
Code 62 Flange Code 61 Flange Code 62 Flange Code 61 Flange Code 62 Flange
45 Elbow Connector Connector Elbow Elbow
Triple-Lok
Flange
Adapters
Page J13 Page J14 Page J14 Page J15 Page J15
XVQ1 XVQ2 BUEQ1 BUHQ1 BUVQ1
Code 61 Flange Code 62 Flange Code 61 Elbow Code 61 Connector Code 61 45 Elbow
45 Elbow 45 Elbow Ferulok
Flange
Adapters

Page J16 Page J16 Page J17 Page J17 Page J18
GFS WFS AS3 GFS WFS
Code 61 Connector Code 61 Elbow Code 61 Weld Boss Code 62 Connector Code 62 Elbow
EO/EO-2
Flange
Connectors

Page J19 Page J19 Page J20 Page J21 Page J21
AS6 BFG BFW FHS3 FHS6
Code 62 Weld Boss Hydraulic Flange Hydraulic Flange Flange Components Flange Components
EO/EO-2 Straight Elbow
Hydraulic
Flange
Connections

Page J22 Page J23 Page J24 Page J25 Page J26
Code 61/62 Seal O-Ring SAE O-Ring
Flange Seal Code 61/62 O-Rings Straight Thread Port
O-Ring
Seals and
Clamps

Page J27 Page J28 Page J28

Parflange 1090 1090 Die 1090 Pin 1090 Sleeve
Flange Tooling Die Flange Tooling Pin Flange Sleeve

Flanging
Tools

Page N23 Page N24 Page N24 Page J10

Complete Flange offering and catalog (4300-FL) available December 2000.

J2 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

SAE J518 / ISO 6162 Connections

(1) (2) (5)

J
(3)

(4)

( 1 ) Formed tube-to-port connection.

( 2 ) Hose-to-port connection.
( 3 ) Formed tube-to-tube connection.
( 4 ) Formed tube-to-hose connection.
( 5 ) Fitting-to-port connection.

Fig. J1 SAE J518 / ISO 6162 Flowchart

J3 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

Introduction Conformance Standards

The SAE and ISO Code 61/62 and ISO 6164 flange fittings Specifications Fittings Only
have been added to Tube Fittings Division's product line to
provide a leak-free solution and higher pressure capabilities in SAE Standards. Code 61 and 62 fittings meet or exceed all
sizes 3/4" through 3". requirement of SAE J518.
The Code 61/62 and ISO 6164 flange fittings incorporate either ISO Standards. Code 61 and 62 fittings meet or exceed all
an O-ring or bonded elastomeric seal, a fitting body or flange requirement of ISO 6162-1 and -2, respectively.
and a four-bolt clamp. As shown in Fig. J1, this connection can The fittings with square bolt pattern flange connections meet or
be achieved in five ways: a machined fitting body which exceed all the requirements of ISO 6164.
incorporates an O-ring can be mated to a flat face port and
attached by a four-bolt clamp, a flange formed on the end of a
tube can be mated to a flat face port using a metal plate with
bonded elastomeric seal and assembled with a four-bolt flange How Code 61/62 Flanges Work
clamp, two flanged tubes can be connected using a steel plate
with bonded elastomeric seal, a flanged tube and hose end with The fitting body, weld sleeve or braze sleeve contains a high
O-ring can be connected using four bolt flange clamps, or a durometer O-ring that is held captive in a precision machined
hose with flange end and O-ring can be connected to a flat face groove. As an alternative, a plate with a bonded high durometer
port. elastomer seal is placed between the flat face of a flanged tube
and the port connection.
As the four-bolt clamp is tightened, the O-ring, or bonded seal,
Design and Construction is compressed to achieve a tight, positive seal. When as-
sembled to the recommended torque, a leak-free connection is
Code 61/62 and ISO 6164 connection consists of three main assured. With flat sealing surfaces on mating components, all
components: a flange, a seal and a clamp. flange connections have virtually unlimited remakability, pro-
viding the O-ring or bonded seal is in good condition.
The Flange. There are three types of flanges that may be used
to complete this connection.
1) A machined fitting body which includes a flange head
on one end and may have many types of connections
Tube Flanging with the Parker
on the other. The available configurations for the Parflange Machine
opposite end are: Seal-Lok, Triple-Lok, Ferulok, EO/
EO-2 and a weld spud. The Parker Parflange 1090 machine is designed specifically to
2) A flange assembled by forming tube material around a flange tube to Code 61 and 62 connections. Utilizing an orbital
sleeve using the Parflange process. This forms a cold forming process, a flat, smooth and rigidly supported 90
smooth flat face on the end of the tube, eliminating the sealing surface is produced. Flanging with the Parflange 1090
need for welding or brazing. machine eliminates the need for welding or brazing a sleeve to
the tube end. Some of the advantages of the Parflange system
3) A flange which is welded or brazed to the end of the are:
tube.
The Parflange process is several times faster than most
The O-ring or Seal Plate. When using a machined fitting body, welding or brazing methods. After the tube is placed in
weld flange or braze flange, sealing is achieved by an O-ring the machine, a cycle time of 15 seconds delivers a fully
which is placed in a groove machined in the part. When using formed tube end.
a flanged tube end formed by the Parflange process, a seal The Parflange process does not require any special
plate, composed of a metal plate with a bonded elastomeric pre- or post-cleaning of the tube or sleeve.
seal, is placed between the flat flange face and the mating part.
Unlike brazing, the Parflange process does not require
The Four-Bolt Clamp. Clamps are usually necessary to as- any flux, braze alloy, post-braze cleaner or rust inhibi-
semble the connection to either a port or another fitting/flange. tor.
Some fittings are manufactured as blocks which do not require Unlike welding, the Parflange process does not require
a clamp. Clamps are available in both a one-piece and a split degreasing of the tube and sleeve, x-ray inspection or
(two-piece) style. Both styles are attached by threading four pressure testing to assure integrity of the weld joint.
bolts into a port or opposing threaded clamp to a predetermined The Parflange process uses an environmentally safe
assembly torque. lubricant which does not emit hazardous fumes.
The Parflange process eliminates the potential leak
path between the braze/weld sleeve and the tube.
The Parflange process does not require cool down to
prevent tube warping associated with welding.

J4 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

Assembly
Fitting/Tube to Port Connection. When assembling a fitting Tube-to-Tube or Tube-to-Hose Connection. When assem-
adapter or brazed/welded tube end, assure that the O-ring is in bling two flanged tubes, place the seal plate on one flange and
place in the flange head groove. When using a Parflange then place the second flange against the seal plate. When
formed tube end, place the seal plate on the port, aligning its assembling a flanged tube to a hose, assure that the O-ring is
holes with the threaded holes of the port. in place in the hose end and then place the hose end against
the flanged tube end.

Two-piece or
split clamp

One-piece or
solid clamp

Fig. J2 Place Flange Seal

Fig. J5 Tube-to-Tube Connection
Place the fitting/tube on the port, centering it between the
mounting holes. Place the solid clamp/split clamp halves over Place the flange clamps over each tube/hose end and connect
the fitting and thread the four bolts into the port. using four bolts. Please note that when making this type of
connection, it is necessary to use at least one solid flange
clamp. This connection is also made easier by utilizing one
clamp which has threaded holes for the attaching bolts.

J
One-piece
solid flange
clamp
Fig. J3 Place Flanged Tube

Assemble the bolts, gradually tightening in a crossing pattern

until the recommeded assembly torque is reached.

Fig. J6 Solid Flange Clamp

Fig. J4 Tighten Connection

J5 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

Assemble the bolts, gradually tighening in a crossing pattern Dash Flange Bolt Torque
unitl the recommended assembly torque is reached. Size Size Thread Size in. lbs. ft. lbs.
12 3/4 3/8-16 300 75 25 4.5
16 1 3/8-16 375 75 31 4.5
20 1-1/4 7/16-14 488 62 41 5
24 1-1/2 1/2-13 625 75 52 6
32 2 1/2-13 725 75 60 6
40 2-1/2 1/2-13 1025 100 85 9
48 3 5/8-11 1725 100 144 15
Table J1 Code 61 Flange Recommended Bolt Torque

Dash Flange Bolt Torque

Size Size Thread Size in. lbs. ft. lbs.
12 3/4 3/8-16 360 75 30 5
16 1 7/16-14 550 75 46 5
20 1-1/4 1/2-13 825 75 69 6
24 1-1/2 5/8-11 1500 100 125 8
32 2 3/4-10 2500 200 208 20
Fig. J7 Tighten Connection Table J2 Code 62 Flange Recommended Bolt Torque

Socket screw Socket Tightening

bolt circle head cap torques
(LK) screws Nm

LK35 M6 10
LK40 M6 10
LK55 M8 25
Table J3 Hydraulic Flange Recommended
Bolt Torque

J6 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

Trouble Shooting
Problem/Probable Causes Remedy Problem/Probable Causes Remedy

Leakage at face Leakage at braze joint:

seal end:
Improper joint Flux and reheat the joint, remove
Misalignment Align the brazed tube end and the clearance and replace with a sleeve of appropri-
or improper fit connecting fitting properly before ate material and with recommended
tightening the tube nut. Hold the flat bore diameter for proper joint clear-
faces of the mating fittings against ance. Repeat brazing in accordance
each other while threading the bolts with recommended procedures.
and wrench tightening. Ensure that the
tube bends are made to the appropri- Mixing of sleeve & Do not mix sleeve and tube mater-
ate angle(s). tube material ials. Always use steel sleeves with
steel tubing and stainless sleeves with
Damaged, pinched Use a new O-ring or seal plate. stainless tubing. Mixing materials
or missing O-ring/ Properly install O-ring in the fitting changes the joint clearance because
Seal Plate groove. Make sure that the O-ring of different thermal expansion
stays in the groove while tightening characteristics of the two materials.
the fitting.
Improper/inadequate First degrease the tube end and
Extruded O-ring/Seal Replace the O-ring or seal plate and cleaning sleeve in suitable alkaline cleaner.
check for the following: Remove oxide build-up with aluminum
- Proper alignment (see above) free emery cloth, if needed.
- Pressure surges in excess of 133%
of rated pressure of the fitting could Improper braze alloy Check with the manufacturer to
cause the O-ring or seal to extrude. confirm braze alloy compatibility.
Tighten the nut to the recommended Improper/inadequate Apply flux liberally to the sleeve and
torque. flux tube end. Use AWS FB3A Parker
Improper tightening Check the joint for tightness. Retorque White Flux (Handy & Harmans Handy
to the Parker recommended torque Flux) for steel only and AWS FB3C
value. If it still leaks, it could be due to Parker Black Flux (Handy & Harmans
any one or combination of causes Type B-1) for steel or stainless steel.
listed below. Take the joint apart and Inadequate/improper The key is to ensure that both the
follow the recommendations listed. braze temperature tube and sleeve reach braze tempera-
Braze overflow Remove the affected sleeve and re- ture at about the same time. A dull red
on sealing surface braze a new one in its place. Do not color of the tube and sleeve is a good
try to file, sand or grind the braze indication of adequate braze tempera-
overflow. Braze alloy tends to flow in ture at which the braze ring should
the direction of higher temperature.
This overflow can occur if the seal
melt completely. Too little heat may
not melt the braze ring completely, J
surface is at a higher temperature causing incomplete braze flow.
than the tail end of the sleeve when Too much heat can cause braze alloy
the braze ring starts melting. There- to boil resulting in pinhole type porosity
fore, when the ring starts melting, the in the joint. It can also burn the flux
heat source should be relocated to the retarding the braze flow.
small diameter of the sleeve to
promote braze flow through the joint. A complete 360 fillet at the small end
of the sleeve is a good indication of full
Damaged fitting Check and replace fittings. Because of braze flow.
elastomeric seal, this connection is
tolerant of minor imperfections on its
sealing surface; but it cannot tolerate
gross scratches, nicks, dents, etc.
Damaged threads can give a false
sense of joint tightness because of
their poor threading ability.

Table J4 Code 61/62 Flange Connection Problems and Solutions

J7 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Technical Data

Features, Advantages & Benefits

1. Manufacture Code 61/62 fittings conform to SAE J518 8. Tube Wall Code 61/62 fittings can be used on thin to
and ISO 6162. This specification controls dimensions and heavy wall tubing. Code 61/62 fittings can also be used with the
tolerances of Code 61/62 fittings. (All shaped fittings are widest range of tubing grades.
machined from forgings for additional strength.)
9. Reusability/Remakeability Code 61/62 fittings can be
2. Sealing Capability An elastomeric O-ring or bonded disassembled and reassembled many times. Simply replace
seal forms the primary sealing element. The O-ring is con- the O-ring or seal plate and tighten to recommended torque.
tained within a precision machined groove on the fitting body.
It is compressed into the groove by the flat face of the port, thus 10. Materials Code 61/62 can be manufactured from a
assuring leak free sealing. wide variety of materials. The most popular materials currently
used are steel and stainless steel.
3. Pressure Rating Code 61/62 fittings have the highest
working pressures on the market in sizes -12 to -40, ranging to 11. Available Configurations Code 61/62 fittings are
6,000 psi, depending on size. available as a standard in 14 different configurations (as shown
in the visual index on page J2). Some of these configurations
4. Visible Inspection of Parflange The surface of the are available in as many as 28 different size combinations.
flange should be reasonably smooth with no deep scratches, Several of these fittings can actually reduce the total number of
gouges or indentations. Minor surface imperfections outside of connections needed in a system. (Other configurations can be
the seal area are acceptable. manufactured upon request.)
5. No Tube Entry Tube does not enter into the body of the 12. Available Sizes Code 61/62 fittings are available as
fitting, allowing for zero clearance, drop-in installation of com- standard in sizes 3/4" through 3".
ponents. This makes repair and maintenance very easy.
13. Parflange Technology Designed to be used with Code
6. Assembly A variety of sleeve attachment methods are 61/62 fittings, the Parflange machine utilizes an orbital cold
available. These include torch brazing, welding and flanging. flow forming process to produce a smooth, rigidly supported
Code 61/62 fittings can also be used as hose adapters. 90 sealing surface on the tube end. The flanged tube ends
connect with SAE J518 conections. This patented Parflange
7. Make-Up Code 61/62 fittings require asembly to speci- process eliminates the need for messy and time-consuming
fied torque values. brazing and welding.

J8 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Recommended Working Pressure, PSIG

Q2S Q1S
STATIC DYNAMIC STATIC DYNAMIC
Size STEEL SS STEEL SS Size STEEL SS STEEL SS
12 8000 8000 6000 6000 12 6500 6500 5000 5000
16 8000 8000 6000 6000 16 6500 6500 5000 5000
20 8000 8000 6000 6000 20 5300 5300 4000 4000
24 8000 8000 6000 6000 24 4000 4000 3000 3000
32 8000 8000 6000 6000 32 4000 4000 3000 3000
40 3300 3300 2500 2500
48 2600 2600 2000 2000

BUHQ1 LOHQ1 LOEQ1 LOVQ1

STATIC (3:1) DYNAMIC (4:1)
STATIC DYNAMIC Size STEEL SS STEEL SS
SIZE STEEL SS STEEL SS 12 6600 6600 5000 5000
12 6600 7920 5000 5000 16 6600 6600 5000 5000
16 6600 7920 5000 5000 20 5300 5300 4000 4000
20 5300 6360 4000 4000 24 4500 4500 3000 3000
24 4000 4800 3000 3000
32 4000 4800 3000 3000

J
LOHQ2 LOEQ2 LOVQ2
BUEQ1 BUVQ1
STATIC (3:1) DYNAMIC (4:1)
STATIC DYNAMIC Size STEEL SS STEEL SS
SIZE STEEL SS STEEL SS 12 8000 8000 6000 6000
12 6600 6600 5000 5000 12-16 8000 8000 6000 6000
16 6600 6600 5000 5000 16 8000 8000 6000 6000
20 5300 5300 4000 4000 16-12 8000 8000 6000 6000
24 4000 4000 3000 3000 20 6600 6600 5000 5000
32 4000 4000 3000 3000 20-16 6600 6600 5000 5000
24 6000 6000 4500 4500

XHQ1 XHQ2 XEQ1 XEQ2 XVQ1 XVQ2

STATIC DYNAMIC STATIC DYNAMIC
SIZE STEEL SS BRASS STEEL SS BRASS SIZE STEEL SS BRASS STEEL SS BRASS
12 6600 7920 4290 5000 6000 3250 12 6600 6600 4290 5000 5000 3250
16 6600 7920 4290 5000 6000 3250 16 6600 6600 4290 5000 5000 3250
20 5300 6360 3445 4000 4800 2600 20 5300 5300 3445 4000 4000 2600
24 4000 4800 2600 3000 3600 1950 24 4000 4000 2600 3000 3000 1950
32 4000 4800 2600 3000 3600 1950 32 4000 4000 2600 3000 3000 1950

Note: For EO/EO-2 flange connectors and hydraulic flange connection parts, the pressure ratings are given in the
dimension charts.

J9 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61/62 Flange Sleeves

Tube O.D. x Code 61 Code 62
Wall Thickness
(inch) Part No. Steel SS Part No. Steel SS
3/4 x .065 TPQ112X065 X
3/4 x .083 TPQ112X083
3/4 x .095 TPQ112X095
3/4 x .120 TPQ112X120 TPQ212X120 X
3/4 x .134 TPQ212X134
3/4 x .148 TPQ212X148
1 x .065 TPQ116X065 X
1 x .083 TPQ116X083
1 x .095 TPQ116X095
1 x .120 TPQ116X120 X TPQ216X120
1 x .134 TPQ116X134 TPQ216X134
1 x .148 TPQ116X148 TPQ216X148
1 x .156 TPQ116X156 TPQ216X156
1 x .188 TPQ216X188
1 x .220 TPQ216X220
1-1/4 x .065 TPQ120X065 X
1-1/4 x .083 TPQ120X083
1-1/4 x .095 TPQ120X095
1-1/4 x .120 TPQ120X120 X TPQ220X120
1-1/4 x .134 TPQ120X134 TPQ220X134
1-1/4 x .148 TPQ120X148 TPQ220X148
1-1/4 x .156 TPQ120X156 TPQ220X156
1-1/4 x .188 TPQ120X188 TPQ220X188
1-1/4 x .220 TPQ220X220
1-1/4 x .250 TPQ220X250
1-1/2 x .065 TPQ124X065 X
1-1/2 x .083 TPQ124X083
1-1/2 x .095 TPQ124X095
1-1/2 x .120 TPQ124X120 X TPQ224X120 X
1-1/2 x .134 TPQ124X134 TPQ224X134
1-1/2 x .148 TPQ124X148 TPQ224X148
1-1/2 x .156 TPQ124X156 TPQ224X156
1-1/2 x .188 TPQ224X188
1-1/2 x .220 TPQ224X220
1-1/2 x .250 TPQ224X250
2 x .065 TPQ132X065 X
2 x .083 TPQ132X083
2 x .095 TPQ132X095
2 x .120 TPQ132X120 X TPQ232X120 X
2 x .134 TPQ132X134 TPQ232X134
2 x .148 TPQ132X148 TPQ232X148
2 x .156 TPQ132X156 TPQ232X156
2 x .188 TPQ132X188 TPQ232X188
2 x .220 TPQ132X220 TPQ232X220
2 x .250 TPQ232X250
2 x .281 TPQ232X281
2-1/2 x .065 TPQ140X065 X
2-1/2 x .083 TPQ140X083
2-1/2 x .095 TPQ140X095
2-1/2 x .120 TPQ140X120
2-1/2 x .134 TPQ140X134
2-1/2 x .148 TPQ140X148
2-1/2 x .156 TPQ140X156
2-1/2 x .220 TPQ140X220
3 x .065 TPQ148X065 X
3 x .083 TPQ148X083
3 x .095 TPQ148X095
3 x .120 TPQ148X120
3 x .134 TPQ148X134
3 x .148 TPQ148X148
3 x .156 TPQ148X156 Contact the Tube Fittings Division for availability of
3 x .220 TPQ148X220 sizes not shown and for dimensional information.

J10 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange Elbow

LOEQ1
ORFS Tube End / Flange End

Part Number Information

LEQ1 - Body only
LOEQ1 - Assembled with ORFS O-Ring
All dimensions are in inches

STANDARD
TUBE Q1 T MATERIAL
FITTING TUBE CODE 61 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL M N Y C E S SS
12 LOEQ1 3/4 3/4 1 3/16-12 0.609 0.609 1.47 2.13 1 3/16 1.500 0.265
16 LOEQ1 1 1 1 7/16-12 0.812 0.812 1.64 2.37 1 7/16 1.750 0.315
20 LOEQ1 1 1/4 1 1/4 1 11/16-12 1.024 1.024 1.76 2.62 1 5/8 2.000 0.315
24 LOEQ1 1 1/2 1 1/2 2-12 1.260 1.260 1.92 3.12 1 7/8 2.375 0.315

Code 62 Flange Elbow

LOEQ2
ORFS Tube End / Flange End

Part Number Information

LEQ2 - Body only
J
LOEQ2 - Assembled with ORFS O-Ring
All dimensions are in inches

STANDARD
TUBE Q2 T MATERIAL
FITTING TUBE CODE 62 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL M N Y C E S SS
12 LOEQ2 3/4 3/4 1 3/16-12 0.609 0.609 1.47 2.13 1 3/16 1.625 0.345
16 LOEQ2 1 1 1 7/16-12 0.812 0.812 1.64 2.37 1 7/16 1.875 0.375
20 LOEQ2 1 1/4 1 1/4 1 11/16-12 1.024 1.024 1.76 2.62 1 5/8 2.125 0.405
24 LOEQ2 1 1/2 1 1/2 2-12 1.260 1.260 1.92 3.12 1 7/8 2.500 0.495

J11 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange Connector

LOHQ1
ORFS Tube End / Flange End

Part Number Information

LHQ1 - Body only
LOHQ1 - Assembled with ORFS O-ring
All dimensions are in inches

STANDARD
TUBE Q1 T MATERIAL
FITTING TUBE CODE 61 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL L C E S SS
12 LOHQ1 3/4 3/4 1 3/16-12 0.609 0.609 1.80 1.500 0.265
16 LOHQ1 1 1 1 7/16-12 0.812 0.812 1.88 1.750 0.315
20 LOHQ1 1 1/4 1 1/4 1 11/16-12 1.024 1.024 1.82 2.000 0.315
24 LOHQ1 1 1/2 1 1/2 2-12 1.260 1.260 1.94 2.375 0.315

Code 62 Flange Connector

LOHQ2
ORFS Tube End / Flange End

Part Number Information

LHQ2 - Body only
LOHQ2 - Assembled with ORFS O-ring
All dimensions are in inches

STANDARD
TUBE Q2 T MATERIAL
FITTING TUBE CODE 62 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL L C E S SS
12 LOHQ2 3/4 3/4 1 3/16-12 0.609 0.609 2.04 1.625 0.345
12-16 LOHQ2 3/4 1 1 3/16-12 0.609 0.609 2.25 1.875 0.375
16 LOHQ2 1 1 1 7/16-12 0.812 0.812 2.25 1.875 0.375
20 LOHQ2 1 1/4 1 1/4 1 11/16-12 1.024 1.024 2.44 2.125 0.405
24 LOHQ2 1 1/2 1 1/2 2-12 1.260 1.260 2.63 2.500 0.495

J12 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange 45 Elbow

LOVQ1
ORFS Tube End / Flange End
Part Number Information
LVQ1 - Body only
LOVQ1 - Assembled with ORFS O-ring
All dimensions are in inches

STANDARD
TUBE Q1 T MATERIAL
FITTING TUBE CODE 61 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL M1 N1 Y C E S SS
12 LOVQ1 3/4 3/4 1 3/16-12 0.609 0.609 1.02 1.58 1 3/16 1.500 0.265
16 LOVQ1 1 1 1 7/16-12 0.812 0.812 1.18 1.85 1 7/16 1.750 0.315
20 LOVQ1 1 1/4 1 1/4 1 11/16-12 1.024 1.024 1.26 2.04 1 5/8 2.000 0.315
24 LOVQ1 1 1/2 1 1/2 2-12 1.260 1.260 1.45 2.38 1 7/8 2.350 0.315

Code 62 Flange 45 Elbow

LOVQ2
ORFS Tube End / Flange End

Part Number Information J

LVQ2 - Body only
LOVQ2 - Assembled with ORFS O-ring
All dimensions are in inches

STANDARD
TUBE Q2 T MATERIAL
FITTING TUBE CODE 62 TUBE END D D1 FROM STOCK
PART # O.D. FLANGE SIZE UN/UNF-2A DRILL DRILL M1 N1 Y C E S SS
12 LOVQ2 3/4 3/4 1 3/16-12 0.609 0.609 1.02 1.58 1 3/16 1.625 0.345
16 LOVQ2 1 1 1 7/16-12 0.812 0.812 1.18 1.85 1 7/16 1.875 0.375
20 LOVQ2 1 1/4 1 1/4 1 11/16-12 1.024 1.024 1.26 2.04 1 5/8 2.125 0.405
24 LOVQ2 1 1/2 1 1/2 2-12 1.260 1.260 1.45 2.38 1 7/8 2.500 0.495

J13 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange Connector

XHQ1
Flare tube end / Flange end

Part Number Information

XHQ1 - Body only

All dimensions in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E L FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) S SS B
12 XHQ1 3/4 1 1/16-12 3/4 1.500 0.609 0.609 0.265 1.99
16 XHQ1 1 1 5/16-12 1 1.750 0.844 0.844 0.315 2.10
20 XHQ1 1 1/4 1 5/8-12 1 1/4 2.000 1.078 1.078 0.315 2.09
24 XHQ1 1 1/2 1 7/8-12 1 1/2 2.375 1.312 1.312 0.315 2.33
32 XHQ1 2 2 1/2-12 2 2.812 1.781 1.781 0.375 2.61

Code 62 Flange Connector

XHQ2
Flare tube end / Flange end

Part Number Information

XHQ2 - Body only

All dimensions in inches

Q2 STANDARD
TUBE TUBE T CODE 62 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E L FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) S SS B
12 XHQ2 3/4 1 1/16-12 3/4 1.625 0.609 0.609 0.345 2.23
16 XHQ2 1 1 5/16-12 1 1.875 0.844 0.844 0.375 2.47
20 XHQ2 1 1/4 1 5/8-12 1 1/4 2.125 1.078 1.078 0.405 2.71
24 XHQ2 1 1/2 1 7/8-12 1 1/2 2.500 1.312 1.312 0.495 3.02

J14 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange Elbow

XEQ1
Flare tube end / Flange end

Part Number Information

XEQ1 - Body only

All dimensions in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E M N Y FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 XEQ1 3/4 1 1/16-12 3/4 1.500 0.609 0.609 0.265 1.66 2.13 1 1/16
16 XEQ1 1 1 5/16-12 1 1.750 0.844 0.844 0.315 1.81 2.37 1 5/16
20 XEQ1 1 1/4 1 5/8-12 1 1/4 2.000 1.078 1.078 0.315 2.06 2.62 1 5/8
24 XEQ1 1 1/2 1 7/8-12 1 1/2 2.375 1.312 1.312 0.315 2.33 3.12 1 7/8
32 XEQ1 2 2 1/2-12 2 2.812 1.781 1.781 0.375 3.06 4.25 2 1/2

Code 62 Flange Elbow

XEQ2
Flare tube end / Flange end

Part Number Information

J
XEQ2 - Body only

All dimensions in inches

STANDARD
TUBE TUBE T Q2 D D1 MATERIAL
FITTING O.D. TUBE END CODE 62 C DRILL DRILL E M N Y FROM STOCK
PART # (inch) UN/UNF-2A FLANGE SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 XEQ2 3/4 1 1/16-12 3/4 1.625 0.609 0.609 0.345 1.66 2.13 1 1/16
16 XEQ2 1 1 5/16-12 1 1.875 0.844 0.844 0.375 1.81 2.37 1 5/16
20 XEQ2 1 1/4 1 5/8-12 1 1/4 2.125 1.078 1.078 0.405 2.06 2.62 1 5/8
24 XEQ2 1 1/2 1 7/8-12 1 1/2 2.500 1.312 1.312 0.495 2.33 3.12 1 7/8

J15 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange 45 Elbow

XVQ1
Flare tube end / Flange end

Part Number Information

XVQ1 - Body only

All dimensions in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E M1 N1 Y FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 XVQ1 3/4 1 1/16-12 3/4 1.500 0.609 0.609 0.265 1.28 1.58 1 1/16
16 XVQ1 1 1 5/16-12 1 1.750 0.844 0.844 0.315 1.47 1.85 1 5/16
20 XVQ1 1 1/4 1 5/8-12 1 1/4 2.000 1.078 1.078 0.315 1.59 2.04 1 5/8
24 XVQ1 1 1/2 1 7/8-12 1 1/2 2.375 1.312 1.312 0.315 1.78 2.38 1 7/8
32 XVQ1 2 2 1/2-12 2 2.812 1.781 1.781 0.375 2.22 3.00 2 1/2

Code 62 Flange 45 Elbow

XVQ2
Flare tube end / Flange end

Part Number Information

XVQ2 - Body only

All dimensions in inches

Q2 STANDARD
TUBE TUBE T CODE 62 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E M1 N1 Y FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 XVQ2 3/4 1 1/16-12 3/4 1.625 0.609 0.609 0.345 1.28 1.58 1 1/16
16 XVQ2 1 1 5/16-12 1 1.875 0.844 0.844 0.375 1.47 1.85 1 5/16
20 XVQ2 1 1/4 1 5/8-12 1 1/4 2.125 1.078 1.078 0.405 1.59 2.04 1 5/8
24 XVQ2 1 1/2 1 7/8-12 1 1/2 2.500 1.312 1.312 0.495 1.78 2.38 1 7/8

J16 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Elbow

BUEQ1
Flareless tube end / flange end

Part Number Information

UEQ1 - Body only
BUEQ1 - Assembled fitting
All dimensions are in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E M N Y FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 BUEQ1 3/4 1 1/16-12 3/4 1.5 0.656 0.609 0.265 1.58 2.13 1 1/16
16 BUEQ1 1 1 5/16-12 1 1.75 0.875 0.844 0.315 1.73 2.37 1 5/16
20 BUEQ1 1.25 1 5/8-12 1.25 2 1.093 1.078 0.315 1.89 2.62 1 5/8
24 BUEQ1 1.5 1 7/8-12 1.5 2.375 1.344 1.312 0.315 2.02 3.12 1 7/8
32 BUEQ1 2 2 1/2-12 2 2.812 1.813 1.781 0.375 2.45 4.25 2 1/2

Code 61 Connector

BUHQ1
Flareless tube end / flange end

Part Number Information

UHQ1 - Body only
BUHQ1 - Assembled fitting
J
All dimensions are in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E L FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) S SS B
12 BUHQ1 3/4 1 1/16-12 3/4 1.5 0.656 0.656 0.265 1.82
16 BUHQ1 1 1 5/16-12 1 1.75 0.875 0.875 0.315 1.88
20 BUHQ1 1.25 1 5/8-12 1.25 2 1.093 1.093 0.315 1.82
24 BUHQ1 1.5 1 7/8-12 1.5 2.375 1.344 1.344 0.315 1.94
32 BUHQ1 2 2 1/2-12 2 2.812 1.813 1.813 0.375 1.97

J17 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 45 Elbow

BUVQ1
Flareless tube end / flange end

Part Number Information

UVQ1 - Body only
BUVQ1 - Assembled fitting
All dimensions are in inches

Q1 STANDARD
TUBE TUBE T CODE 61 D D1 MATERIAL
FITTING O.D. TUBE END FLANGE C DRILL DRILL E M1 N1 Y FROM STOCK
PART # (inch) UN/UNF-2A SIZE (inch) (inch) (inch) (inch) (inch) (inch) (inch) S SS B
12 BUVQ1 3/4 1 1/16-12 3/4 1.5 0.656 0.609 0.265 1.27 1.58 1 1/16
16 BUVQ1 1 1 5/16-12 1 1.75 0.875 0.844 0.315 1.36 1.85 1 5/16
20 BUVQ1 1.25 1 5/8-12 1.25 2 1.093 1.078 0.315 1.45 2.04 1 5/8
24 BUVQ1 1.5 1 7/8-12 1.5 2.375 1.344 1.312 0.315 1.52 2.38 1 7/8
32 BUVQ1 2 2 1/2-12 2 2.812 1.813 1.781 0.375 1.83 3 2 1/2

J18 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

GFS/WFS SAE-Flange Connections; Code 61 Standard Series

I3
S6
S1 S6
S2 i

S3
M1 M1
Tube
d1 O.D.
I2
d1
L2
i M S2
M
I1

L1
GFS: Metric Tube / SAE Flange Tube
O.D.

WFS: Metric Tube / SAE Flange

Standard Standard
Working Material EO-2 From
Size Tube Pressure M d1 i I1 I2 I3 L1 L2 S1 S2 S3 S6 From Stock Stock
Part no. o.d. (bar) thread S SS B S SS
GFS32/15LA3C 1/2 15L 200 M22 x 1.5 12 11.5 41 29 36 56 44 24 27 24 6
GFS32/16SA3C 1/2 16S 220 M24 x 1.5 12 11.5 42.5 30 36 60 48 24 30 24 6
GFS33/18LA3C 3/4 18L 200 M26 x 1.5 15 15.5 46.5 32 42 62 48 30 32 30 8
GFS33/22LA3C 3/4 22L 100 M30 x 2 19 15.5 46.5 34 42 62 50 30 36 30 8
GFS33/20SA3C 3/4 20S 220 M30 x 2 16 15.5 46.5 33 42 68 54 30 36 30 8
GFS33/25SA3C 3/4 25S 220 M36 x 2 17 15.5 45 33 42 69 57 30 46 30 8
GFS34/28LA3C 1 28L 100 M36 x 2 24 13.5 47.5 37 45 63 53 36 41 36 8
GFS34/30SA3C 1 30S 220 M42 x 2 24 13.5 50.5 37 45 76 63 36 50 36 8
GFS35/35LA3C 1 1/4 35L 100 M45 x 2 30 18.5 48.5 47 50 69 68 41 50 41 8 J
GFS35/25SA3C 1 1/4 25S 175 M36 x 2 20 18.5 48 43 50 72 67 41 46 41 8
GFS35/30SA3C 1 1/4 30S 175 M42 x 2 25 18.5 49.5 44 50 75 70 41 50 41 8
GFS35/38SA3C 1 1/4 38S 175 M52 x 2 28 18.5 50 43 50 81 74 46 60 41 8
GFS36/42LA3C 1 1/2 42L 100 M52 x 2 36 18.5 53 47 55 76 70 46 60 50 10
GFS36/38SA3C 1 1/2 38S 130 M52 x 2 32 18.5 54 48 55 85 79 46 60 50 10

WFS32/15LA3C 1/2 15L 200 M22 x 1.5 12 11.5 41 29 36 56 44 24 27 24 6

WFS32/16SA3C 1/2 16S 220 M24 x 1.5 12 11.5 41.5 30 36 60 48 24 30 24 6
WFS33/18LA3C 3/4 18L 200 M26 x 1.5 15 15.5 45.5 32 42 62 48 30 32 30 8
WFS33/22LA3C 3/4 22L 100 M30 x 2 19 15.5 45.5 34 42 62 50 30 36 30 8
WFS33/20SA3C 3/4 20S 220 M30 x 2 16 15.5 46.5 33 42 68 54 30 36 30 8
WFS33/25SA3C 3/4 25S 220 M36 x 2 17 15.5 45 33 42 69 57 30 46 30 8
WFS34/28LA3C 1 28L 100 M36 x 2 24 13.5 46.5 37 45 63 53 36 41 36 8
WFS34/30SA3C 1 30S 220 M42 x 2 24 13.5 49.5 37 45 76 63 36 50 36 8
WFS35/35LA3C 1 1/4 35L 100 M45 x 2 30 18.5 47.5 47 50 69 68 41 50 41 8
WFS35/25SA3C 1 1/4 25S 175 M36 x 2 20 18.5 48 43 50 72 67 41 46 41 8
WFS35/30SA3C 1 1/4 30S 175 M42 x 2 25 18.5 48.5 44 50 75 70 41 50 41 8
WFS35/38SA3C 1 1/4 38S 175 M52 x 2 28 18.5 50 43 50 81 74 46 60 41 8
WFS36/42LA3C 1 1/2 42L 100 M52 x 2 36 18.5 53 47 55 76 70 46 60 50 10
WFS36/38SA3C 1 1/2 38S 130 M52 x 2 32 18.5 54 48 55 85 79 46 60 50 10

EO-2 Part Number example: GFS33/18ZLA3C

Temperature range without pressure reductions for fittings with O-ring sealing of
NBR (e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up
to +120C.
Tightening torques for socket head cap screws see Table J1.

J19 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

AS3 SAE-Flange Connection; Code 61 Standard Series

For welded tube connection

S6

M1
d1
d7

i
I1

AS: Weld Boss / SAE Flange

Standard
Tube Working Weld nipple Material
Part no. Size o.d. x wall pressure d1 d7 i I1 S6 body From Stock
thickness (bar) S SS B
AS32/15X2 1/2 15 x 2 200 11 23.9 11.5 38 6 AS32/15X2X
AS32/16X3 1/2 16 x 3 220 10 23.9 11.5 38 6 AS32/16X3X
AS33/18X1.5 3/4 18 x 1.5 130 15 31.8 15.5 50 8 AS33/18X1.5X
AS33/22X2 3/4 22 x 2 140 18 31.8 15.5 50 8 AS33/22X2X
AS33/20X3 3/4 20 x 3 220 14 31.8 15.5 50 8 AS33/20X3X
AS33/25X4 3/4 25 x 4 220 17 31.8 15.5 50 8 AS33/25X4X
AS34/28X2 1 28 x 2 115 24 38 13.5 50 8 AS34/28X2X
AS34/30X4.5 1 30 x 4.5 220 21 38 13.5 50 8 AS34/30X4.5X
AS35/35X2 1 1/4 35 x 2 90 31 43 18.5 55 8 AS35/35X2X
AS35/25X3 1 1/4 25 x 3 175 19 43 18.5 55 8 AS35/25X3X
AS35/30X4 1 1/4 30 x 4 175 22 43 18.5 55 8 AS35/30X4X
AS35/38X5 1 1/4 38 x 5 175 28 43 18.5 55 8 AS35/38X5X
AS36/42X3 1 1/2 42 x 3 115 36 50 18.5 57 10 AS36/42X3X
AS36/38X4 1 1/2 38 x 4 130 30 50 18.5 57 10 AS36/38X4X
AS38/50X6 2 50 x 6 130 38 62 24 62 12 AS38/50X6X
AS38/65X8 2 65 x 8 130 49 65 24 62 12 AS38/65X8X

Temperature range without pressure reductions for fittings with O-ring sealing of NBR
(e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up to
+120C.
Tightening torques for socket head cap screws see Table J1.

J20 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

GFS/WFS SAE-Flange Connection; Code 62 High Pressure

S6 I3
S1
S2 S6
i

M1 S3
Tube M1
d1 O.D.

I2
d1
i M L2

M S2
I1

L1

GFS: Metric Tube / SAE Flange

Tube
O.D.

WFS: Metric Tube / SAE Flange

Standard Standard
Tube Working From EO-2 From
o.d. pressure M d1 i I1 I2 I3 L1 L2 S1 S2 S3 S6 Stock Stock
Part no. Size series (bar) thread S SS B S SS
GFS62/16SA3C 1/2 16S 250 M24 x 1.5 12 13.5 44.5 29.5 39 63 48 24 30 24 6
GFS63/16SA3C 3/4 16S 250 M24 x 1.5 12 15.5 50.5 36.5 48 69 55 30 30 32 8
GFS63/20SA3C 3/4 20S 250 M30 x 2 16 15.5 50.5 35.5 48 72 57 30 36 32 8
GFS63/25SA3C 3/4 25S 250 M36 x 2 17 15.5 51 36 48 75 60 30 46 32 8
GFS64/25SA3C 1 25S 250 M36 x 2 20 20.5 60 41 60 84 65 36 46 41 10
GFS64/30SA3C 1 30S 250 M42 x 2 24 20.5 60.5 41.5 60 87 68 36 50 41 10
GFS65/30SA3C 1 1/4 30S 250 M42 x 2 25 22.5 65.5 44.5 68 92 71 41 50 46 10

GFS65/38SA3C
GFS66/38SA3C
1 1/4
1 1/2
38S
38S
200
200
M52 x 2
M52 x 2
30 22.5 67
30 24.5
45 68
73 56 76
98
104 87
76 46
46
60
60
46
50
10
14
J
WFS62/16SA3C 1/2 16S 250 M24 x 1.5 12 13.5 44.5 29.5 39 63 48 24 30 24 6
WFS63/16SA3C 3/4 16S 250 M24 x 1.5 12 15.5 50.5 36.5 48 69 55 30 30 32 8
WFS63/20SA3C 3/4 20S 250 M30 x 2 16 15.5 50.5 35.5 48 72 57 30 36 32 8
WFS63/25SA3C 3/4 25S 250 M36 x 2 17 15.5 51 36 48 75 60 30 46 32 8
WFS64/25SA3C 1 25S 250 M36 x 2 20 20.5 60 44 60 84 65 36 46 41 10
WFS64/30SA3C 1 30S 250 M42 x 2 24 20.5 60.5 41.5 60 87 68 36 50 41 10
WFS65/30SA3C 1 1/4 30S 250 M42 x 2 25 22.5 65.5 44.5 68 92 71 41 50 46 10
WFS65/38SA3C 1 1/4 38S 200 M52 x 2 30 22.5 67 45 68 98 76 46 60 46 10
WFS66/38SA3C 1 1/2 38S 200 M52 x 2 30 24.5 73 56 76 104 87 46 60 50 14

EO-2 Part Number example: GFS63/16ZSA3C

Temperature range without pressure reductions for fittings with O-ring sealing of NBR
(e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up to
+120C.
Tightening torques for socket head cap screws see Table J2.

J21 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

AS6 SAE-Flange Connection; Code 62 High Pressure

For welded tube connection

S6

M1
d1
d7

i
I1

AS: Weld Boss / SAE Flange

Standard
Tube Working Weld nipple Material
Size o.d. wall pressure d1 d7 i I1 S6 body From Stock
Part no. thickness (bar) S SS B
AS62/16X3 1/2 16 x 3 260 10 23.9 13.5 41 6 AS62/16X3X
AS63/25X5 3/4 25 x 5 260 15 31.8 15.5 55 8 AS63/25X5X
AS64/25X5 1 25 x 5 260 15 38 20.5 67 10 AS64/25X5X
AS64/30X4 1 30 x 4 200 22 38 20.5 67 10 AS64/30X4X
AS65/30X4* 1 1/4 30 x 4 200 22 43.7 17.5 78 10 AS65/30X4X
AS65/38X5 1 1/4 38 x 5 200 28 43.7 17.5 78 10 AS65/38X5X
AS65/38X8* 1 1/4 38 x 8 260 22 43.7 17.5 78 10 AS65/38X8X
AS66/38X5 1 1/2 38 x 5 200 28 50.8 24.5 85 14 AS66/38X5X
AS66/38X8 1 1/2 38 x 8 260 22 50.8 24.5 85 14 AS66/38X8X
AS68/50X9 2 50 x 9 260 32 66.6 32.5 116 17 AS68/50X9X
AS68/65X8 2 65 x 8 190 49 66.6 32.5 116 17 AS68/65X8X

* Identical types.

Temperature range without pressure reductions for fittings with O-ring sealing of
NBR (e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up
to +120C.
Tightening torques for socket head cap screws see Table J2.

J22 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

BFG Hydraulic Flange Straight

Tube connection according to DIN 2353

L1 6
LK i 5
S2

G
d Tube
O.D.

L1 3
4 I2
I1 2
1 L2

Metric Tube / Hydraulic Flange

Standard Standard
Working Material EO-2 From
Pressure Tube From Stock Stock
Part No. (bar) o.d. d G i I1 I2 L1 L2 LK S2 S SS B S SS
BFG15L/LK40A3C 65 15 12 M 6 12.5 35 7 42 43 40 27
BFG18L/LK40A3C 65 18 15 M 6 12.5 35 7.5 42 44 40 32
BFG22L/LK40A3C 65 22 19 M 6 12.5 35 7.5 42 44.5 40 36
BFG15L/LK35A3C 155 15 12 M 6 12.5 30 7 39 38 35 27
BFG10L/LK35A3C 200 10 8 M6 12.5 30 7 39 39 35 19
BFG12L/LK35A3C 200 12 10 M 6 12.5 30 7 39 39 35 22

Unassembeld Fitting Components

1 2 3 4 5 6
Straight Nut Progressive O-Ring Cap screws Spring washer
body ring DIN 912-8.8 (4 pcs.) DIN 127 (4 pcs.)
BFG15L/LK40A3CX M15LA3CX DPR15LA3CX OR26X2.5X M6X22 A6 J
BFG15L/LK40A3CX M18LA3CX DPR18LA3CX OR26X2.5X M6X22 A6
BFG22L/LK40A3CX M22LA3CX DPR22LA3CX OR26X2.5X M6X22 A6
BFG15L/LK35A3CX M15LA3CX DPR15LA3CX OR20X2.5X M6X22 A6
BFG10L/LK35A3CX M10LA3CX DPR10LA3CX OR20X2.5X M6X22 A6
BFG12L/LK35A3CX M12LA3CX DPR12LA3CX OR20X2.5X M6X22 A6

EO-2 Part Number example: BFG15ZL/LK40A3C

Temperature range without pressure reductions for fittings with O-ring sealing of NBR
(e.g., buna N series) -35C up to +100C, FPM (e.g., Viton on request) -25C up to 120C.
Tightening torques for socket head cap screws see Table J3.

J23 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

BFW Hydraulic Flange Elbow h2

L1 h1
LK 7
12.5 5

1
6

L1
I
L2 4

t S2

2 3
Tube
O.D. Metric Tube / Hydraulic Flange

Standard Standard
Working Material EO-2 From
Complete Pressure Tube From Stock Stock
Part no. (bar) o.d. h1 h2 I L1 L2 LK S2 t S SS B S SS
BFW15L/LK40A3C 65 15 22.5 36.5 38 42 46 40 27 7
BFW18L/LK40A3C 65 18 22.5 36.5 38 42 47 40 32 7.5
BFW22L/LK40A3C 65 22 22.5 36.5 38 42 47.5 40 36 7.5
BFW28L/LK40A3C 65 28 28 43 40 42 49 40 41 7.5
BFW35L/LK40A3C 65 35 32 55 41 42 52 40 50 10.5
BFW35L/LK55A3C 65 35 32 51.5 49 58 62 55 50 10.5
BFW42L/LK55A3C 65 42 40 64.5 49 58 61 55 60 11
BFW15L/LK35A3C 155 15 16.5 26.5 38 39 46 35 27 7
BFW20S/LK55A3C 155 20 24 38 45 58 56 55 36 10.5
BFW20S/LK40A3C 155 20 22.5 35.5 40 42 50 40 36 10.5
BFW25S/LK55A3C 155 25 30 46 49 58 61 55 46 12
BFW30S/LK55A3C 155 30 32 50 49 58 62 55 50 13.5
BFW10L/LK35A3C 200 10 16.5 26.5 38 39 47 35 19 7
BFW12L/LK35A3C 200 12 16.5 26.5 38 39 47 35 22 7
BFW16S/LK35A3C 200 16 20 31 38 39 48 35 30 8.5
BFW20S/LK35A3C 200 20 25 38 45 39 56 35 36 10.5

1 2 3 4 5 6 7
Elbow Nut Progressive O-Ring 2 cap screws 2 cap screws 4 spr. washers
body ring DIN 912-8.8 DIN 912-8.8 DIN 127
BFW15L/LK40A3CX M15LA3CX DPR15LA3CX OR26X2.5X M6X22 M6X22 A6
BFW18L/LK40A3CX M18LA3CX DPR18LA3CX OR26X2.5X M6X22 M6X22 A6
BFW22L/LK40A3CX M22LA3CX DPR22LA3CX OR26X2.5X M6X22 M6X22 A6
BFW28L/LK40A3CX M28LA3CX DPR28LA3CX OR26X2.5X M6X20 M6X50 A6
BFW35L/LK40A3CX M35LA3CX DPR35LA3CX OR26X2.5X M6X22 M6X60 A6
BFW35L/LK55A3CX M35LA3CX DPR35LA3CX OR33X2.5X M8X25 M8X60 A8
BFW42L/LK55A3CX M42LA3CX DPR42LA3CX OR33X2.5X M8X25 M8X70 A8
BFW15L/LK35A3CX M15LA3CX DPR15LA3CX OR20X2.5X M6X22 M6X35 A6
BFW20S/LK55A3CX M20SA3CX DPR20SA3CX OR33X2.5X M8X25 M8X50 A8
BFW20S/LK40A3CX M20SA3CX DPR20SA3CX OR26X2.5X M6X22 M6X45 A6
BFW25S/LK55A3CX M25SA3CX DPR25SA3CX OR33X2.5X M8X25 M8X55 A8
BFW30S/LK55A3CX M30SA3CX DPR20SA3CX OR33X2.5X M8X25 M8X55 A8
BFW10L/LK35A3CX M10LA3CX DRP10LA3CX OR20X2.5X M6X22 M6X35 A6
BFW12L/LK35A3CX M12LA3CX DPR12LA3CX OR20X2.5X M6X22 M6X35 A6
BFW16S/LK35A3CX M16SA3CX DPR16SA3CX OR20X2.5X M6X22 M6X40 A6
BFW20S/LK35A3CX M20SA3CX DPR20SA3CX OR20X2.5X M6X22 M6X45 A6

Temperature range without pressure reductions for fittings with O-ring sealing of NBR
(e.g., buna N series) -35C up to +100C, FPM (e.g., Viton on request) -25C up to +120C.
Tightening torques for socket head cap screws see Table J3.

EO-2 Part Number example: BFW15ZL/LK40A3C

J24 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 61 Flange Components; for Straights and Elbows

(ISO 6162-1, Type 1)
Socket Head Cap
Flange Half Screw, Metric

Straight Body
(page J101)

O-ring Ferrule Tube Nut

(page J117) (page J117)

Elbow Body
(page J101)

Flange pattern

for Working SAE 4 socket head for

tube Pressure flange cap screws tube o.d. A B a b
Size o.d. (bar) halves DIN 912-8.8 O-ring Size series
1/2 15L 315 FHS 32A3CX M8X30 OR18.64 x 3.53X 1/2 15L 54 46 38.1 17.5
1/2 16S 350 1/2 16S 54 46 38.1 17.5
3/4 18L 315 FHS 33A3CX M10X35 OR25.00 x 3.53X 3/4 18L 65 52 47.6 22.2
3/4 22L 160 3/4 22L 65 52 47.6 22.2
3/4 20S 350 3/4 20S 65 52 47.6 22.2
3/4 25S 350 3/4 25S 65 52 47.6 22.2
1
1
28L
30S
160
350
FHS 34A3CX M10X35 OR32.92 x 3.53X 1
1
28L
30S
70
70
59
59
52.4
52.4
26.2
26.2
J
1 1/4 35L 160 FHS 35A3CX M12X40 OR37.70 x 3.53X 1 1/4 35L 79 73 58.7 30.2
1 1/4 25S 280 1 1/4 25S 79 73 58.7 30.2
1 1/4 30S 280 1 1/4 30S 79 73 58.7 30.2
1 1/4 38S 280 1 1/4 38S 79 73 58.7 30.2
1 1/2 42L 160 FHS 36A3CX M12X40 OR47.22 x 3.53X 1 1/2 42L 94 83 69.9 35.7
1 1/2 38S 210 1 1/2 38S 94 83 69.9 35.7

Temperature range without pressure reductions for fittings with O-ring sealing of
NBR (e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up
to +120C.
Tightening torques for socket head cap screws see Table J1.

J25 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

Code 62 Flange Components; for Straight and Elbows

(ISO 6162-2, Type 1)
Socket Head Cap
Flange Half Screw, Metric

Straight Body
(page J103)

O-ring Ferrule Tube Nut

(page J117) (page J117)

Elbow Body
(page J103) Flange pattern

For Working SAE 4 socket head for

Tube o.d. Pressure flange cap screws tube o.d. A a B b
Size Series (bar) halves DIN 912-8.8 O-ring Size series
1/2 16S 400 FHS 62A3CX M8X35 OR18.64 x 3.53X 1/2 16S 56 40.5 47 18.2
3/4 16S 400 FHS 63A3CX M10X35 OR25.00 x 3.53X 3/4 16S 71 50.8 60 23.8
3/4 20S 400 FHS 63A3CX M10X35 OR25.00 x 3.53X 3/4 20S 71 50.8 60 23.8
3/4 25S 400 FHS 63A3CX M10X35 OR25.00 x 3.53X 3/4 25S 71 50.8 60 23.8
1 25S 400 FHS 64A3CX M12X45 OR32.92 x 3.53X 1 25S 81 57.2 70 27.8
1 30S 400 FHS 64A3CX M12X45 OR32.92 x 3.53X 1 30S 81 57.2 70 27.8
1 1/4 30S 400 FHS 65A3CX M14X50 OR37.70 x 3.53X 1 1/4 30S 95 66.7 77 31.8
1 1/4 38S 315 FHS 65A3CX M14X50 OR37.70 x 3.53X 1 1/4 38S 95 66.7 77 31.8
1 1/2 38S 315 FHS 66A3CX M16X55 OR47.22 x 3.53X 1 1/2 38S 113 79.4 95 36.5

Temperature range without pressure reductions for fittings with O-ring sealing of
NBR (e.g., buna N series) -35 up to +100C, FPM (e.g., Viton on request) -25 up
to +120C.
Tightening torques for socket head cap screws see Table J2.

J26 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

ISO / SAE Code 61 and 62 Flange Seals

D
When using the Parflange technology for forming tube ends to
assemble to SAE and ISO code 61 and 62 connections, a
flange seal plate is required. Parker has designed this flange
seal plate which incorporates a bonded elastomer seal for O
Leak Free connections.

FF
T

Code 61 Seals
T O FF D
Size *Part Number
(in) (in) (in) (in)
3/4" 12Q1S N0702 0.10 2.56 2.06 0.98
1" 16Q1S N0702 0.10 2.75 2.32 1.29
1-1/4" 20Q1S N0702 0.10 3.12 2.86 1.49
1-1/2" 24Q1S N0702 0.10 3.69 3.24 1.85
2" 32Q1S N0702 0.10 4.00 3.82 2.22
2-1/2" 40Q1S N0702 0.10 4.50 4.28 2.73
3" 48Q1S N0702 0.10 5.32 5.16 2.35

Code 62 Seals
T O FF D
Size *Part Number
(in) (in) (in) (in)
3/4" 12Q2S N0702 0.10 2.81 2.38 0.98
1" 16Q2S N0702 0.10 3.19 2.75 1.29
1-1/4" 20Q2S N0702 0.10 3.75 3.06 1.49
1-1/2" 24Q2S N0702 0.10 4.44 3.75 1.85
2" 32Q2S N0702 0.10 5.25 4.50 2.22

* All seal plates are zinc plated steel with a bonded 90 durometer
nitrile elastomer seal material.
J

J27 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio
4300 Catalog 4-Bolt Flange Connections
Part Data

SAE Straight Thread Port O-ring

SAE O-Ring
Part Number Information
Specify size and compound
Example: 3-906 N0552
All dimensions are in inches
Standard
Tube Tube Tube Material
Fitting Fitting O.D. I.D. W From Stock
Size Part # (inch) (inch) (inch) N0552 V0894 N0756
2 3-902 1/8 0.24 0.06
3 3-903 3/16 0.30 0.06
4 3-904 1/4 0.35 0.07
5 3-905 5/16 0.41 0.07
6 3-906 3/8 0.47 0.08
8 3-908 1/2 0.64 0.09
10 3-910 5/8 0.76 0.10
12 3-912 3/4 0.92 0.12
14 3-914 7/8 1.05 0.12
16 3-916 1 1.17 0.12
20 3-920 1 1/4 1.48 0.12
24 3-924 1 1/2 1.72 0.12
32 3-932 2 2.34 0.12
N0552 is the standard 90-durometer Nitrile (e.g., Buna-N).
V0894 is an optional 90-durometer fluorocarbon (e.g., Viton).
N0756 is an optional 75-durometer Nitrile (e.g., Buna-N) for CNG applications.
Other compounds may be purchased from O-ring Division (606) 269-2351.
See page A29 for O-ring Material Selection and data.

O-Ring
Code 61 and Code 62 Flanges

Hose
Products Parker
Division O-Ring
1) 2)
Part # Size Size W I.D.
711510-6 2-210 1/2 0.139 0.734
711510-5 2-214 3/4 0.139 0.984
711510-4 2-219 1 0.139 1.296
711510-3 2-222 1 1/4 0.139 1.484
711510-2 2-225 1 1/2 0.139 1.859
711510-1 2-228 2 0.139 2.234

1) O-rings may also be purchased from Parker O-ring Division. Click Here
2) Code 61, Code 62 Flange Kits and O-Rings may be purchased to Go to the First Page
of the Next Section
from the Hose Products Division (440) 943-5700. O-ring
compound is 90-durometer nitrile, e.g., Buna-N.

J28 Parker Hannifin Corporation

Tube Fittings Division
FluidConnectors Columbus, Ohio