Scribd
Upload
340 views5 pages

Assignment #3 Design of Reinforced Concrete Structures Model Answer

This document contains an assignment for a reinforced concrete course. It provides load values for a live load, flooring, girder own weight, and beam own weight to be used in a load distribution model. The assignment asks students to make a load distribution for given beams and a girder. It also includes the instructor's model answers and comments on the assignment.

Uploaded by

Fady Abdel Aziz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
340 views5 pages

Assignment #3 Design of Reinforced Concrete Structures Model Answer

This document contains an assignment for a reinforced concrete course. It provides load values for a live load, flooring, girder own weight, and beam own weight to be used in a load distribution model. The assignment asks students to make a load distribution for given beams and a girder. It also includes the instructor's model answers and comments on the assignment.

Uploaded by

Fady Abdel Aziz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

German University in Cairo

Faculty of Engineering and Material Science


Civil Engineering Department
Spring 2012

CIS 403: Reinforced Concrete I

Assignment # 3
Load Distribution

Model Answer

Make the load distribution for the given beams and girder (slab thickness t s = 140mm).

Live load: p = 1.0 kN/m2 Flooring: g = 1.0 kN/m2

Own weight of girder: gG = 5.0 kN/m Own weight of beams: gB = 2.0 kN/m

Dr. Khaled Mohamed Hilal Assignment # 3 Model Answer


German University in Cairo
Faculty of Engineering and Material Science
Civil Engineering Department
Spring 2012

Dr. Khaled Mohamed Hilal Assignment # 3 Model Answer


German University in Cairo
Faculty of Engineering and Material Science
Civil Engineering Department
Spring 2012

Dr. Khaled Mohamed Hilal Assignment # 3 Model Answer


German University in Cairo
Faculty of Engineering and Material Science
Civil Engineering Department
Spring 2012

Dr. Khaled Mohamed Hilal Assignment # 3 Model Answer


German University in Cairo
Faculty of Engineering and Material Science
Civil Engineering Department
Spring 2012

Comments:
1. It was not required to consider dead load and live load separately to get the full mark
2. Alternatively for the main girder the triangular load below the girder can be considered using factors Ce
and Ce (this would result in different diagrams for bending and shear)

Dr. Khaled Mohamed Hilal Assignment # 3 Model Answer

You might also like