Quadrat and Sampling
Uploaded by
Arif UllahQuadrat and Sampling
Uploaded by
Arif UllahINTERNATIONAL TURKISH HOPE SCHOOL
2016 2017 ACADEMIC YEAR
CHITTAGONG SENIOR SECTION
BIOLOGY QUADRAT and SAMPLING
CLASS IX and X
Name : .................. Date : ......................
SYLLABUS CONTENT
BIOLOGY
Section 4: Ecology and the environment
4.1 understand the terms population, community, habitat and ecosystem
4.2 recall the use of quadrats to estimate the population size of an organism in two different
areas
4.3 describe the use of quadrats as a technique for sampling the distribution of organisms in
their habitats.
Why sample in ecology?
In an ideal world when investigating, say, the number of dandelions in two meadows, you
would count every single dandelion in each. The problem is that this might take forever
and become very, very boring. So, instead, you need to take a sample. You might estimate
the number of dandelions in each meadow by counting the number in several small areas
and then multiplying up to calculate a value for each meadow. The idea is to maximise the
usefulness of your data while minimising the effort required to collect them.
Random sampling
Frequently, ecologists notice a distinct pattern that may be related to one or more factors at
two sites. For example, the vegetation in one field may be very different to that in another
field, or the species found under oak trees may be different to those under ash trees, or
the species upstream and downstream of an outflow pipe discharging into a river may
seem to differ. To make valid comparisons, samples need to be taken from both sites. If the
investigator chooses where to sample, the sample will be subjective. Random sampling allows
an unbiased sample to be taken.
Using a grid
In a habitat, such as a meadow or heathland, tape measures put on the ground at right-angles
to each other can be used to mark out a sampling area (Figure 1). Using a pair of random
numbers you can locate a position within the sampling area to collect your data. The random
numbers can be pulled from a set of numbers in a hat, come from random number tables, or
be generated by a calculator or computer. The two numbers are used as coordinates to locate
a sampling position within the area. The first random number gives the position on the first
tape and the second random number gives the position on the second tape.
Teacher in Charge: ARIF ULLAH 1|Page
If you are sampling fixed objects within an area, for example the area of Pleurococcus (an
alga) on the shaded side of trees in a wood or the number of woodlice under rocks, you
could number all the trees or rocks and then use random numbers to select which trees or
rocks to sample.
This sampling idea is also used when measuring the number of cells in a culture. The culture
is mixed to give a reasonably uniform distribution of cells and then a known volume is
placed on a haemocytometer (a special cavity slide with a ruled grid in the centre). You then
count the number of cells that occur in, say, 25 squares of the grid. Because you know the
dimensions of the grid squares and the depth of the liquid above the square, you can work
out the volume of culture in each square, and then calculate a mean number of cells per cm3
of the culture.
Systematic sampling
Random sampling may not always be appropriate. If conditions change across a habitat, for
example across a rocky shore or in a sloping meadow that becomes more boggy towards one
side, then systematic sampling along a transect allows the changes to be studied. A transect
is effectively a line laid out across the habitat, usually using a tape measure, along which
samples are taken. The sample points may be at regular intervals, say every 2 m across a field,
or they may be positioned in relation to some morphological feature, such as on the ridges
and in the hollows in a sand dune system.
Sampling techniques
Quadrats
Quadrats are used for sampling plant communities and slow moving or stationary animals,
for example many of those found on rocky shores. There are two types of quadrat: a frame
quadrat and a point quadrat.
A frame quadrat is usually square; the most commonly used is 50 cm by 50 cm (0.25 m2)
and may be subdivided into 25 smaller squares, each 10 cm by 10 cm. The abundance of
organisms within the quadrat is estimated (see the section Methods of measuring abundance
and Figure 3). Quadrats may be placed across the site to be sampled using random or
systematic sampling methods. Throwing quadrats is not random and can be dangerous.
It is important to sample enough quadrats to be representative of the site, but why do 1000
quadrats if 10 will give almost as accurate a result? To find out the optimum number of
quadrats required, record the number of species in each quadrat and plot the cumulative
results against number of quadrats until sampling additional quadrats does not substantially
increase the number of species recorded.
A point quadrat frame (Figure 2) enables pins to be lowered onto the vegetation below.
Each species touched is recorded as a hit. The percentage cover for a particular species is
calculated using the equation:
Teacher in Charge: ARIF ULLAH 2|Page
Methods of measuring abundance
Density
Count the number of individuals in several quadrats and take the mean to give number per
unit area, for example per metre squared (m22). In many plant species (e.g. grasses) it is very
difficult to distinguish individual plants, so measuring density is not possible.
Frequency
Frequency is the number or percentage of sampling units in which a particular species
occurs. This avoids having to count the number of individuals. If clover was recorded in 10
of the 25 squares that make up a 0.25 m2 quadrat frame, the percentage frequency would be
40%. You need to be consistent when determining presence or absence in a sampling unit.
For example, you might decide that only plants rooted in the square are counted, or you
might decide that any plant or animal in the quadrat is counted including any that touch or
overhang the quadrat.
Percentage cover
This is the percentage of the ground covered by a species within the sampling unit. Count
the number of squares within the quadrat that the plant completely covers, then count those
that are only partly covered and estimate the total number of full squares that would be
completely covered by that species.
Estimating animal populations
Quadrats cannot be used for mobile animals as these dont stay in the quadrats. A variety
of different nets and traps need to be used. Animals that occur on the soil surface may be
sampled using a pitfall trap (Figure 3). Those in vegetation can be sampled using a pooter
directly or indirectly (after being knocked from the vegetation onto a white sheet). Insects
and other small invertebrates found in leaf litter can be collected using a Tullgren funnel.
Markrelease methods can also be used.
Teacher in Charge: ARIF ULLAH 3|Page
Teacher in Charge: ARIF ULLAH 4|Page
Investigate the distribution of organisms in an ecosystem, using sampling techniques including:
a) pooters
b) sweep nets/pond nets
c) pitfall traps
d) quadrats
and measure environmental factors including:
e) temperature
f) light intensity
g) pH
Teacher in Charge: ARIF ULLAH 5|Page
Teacher in Charge: ARIF ULLAH 6|Page
