Scribd
Upload
50 views

Square & Rectangular Tipe: Note: Pemesanan Diluar Standard Dapat Dikoordinasikan Lebih Lanjut

This document provides specifications for square and rectangular electrical resistance welded pipes. It lists various pipe sizes from 16x16 mm to 100x100 mm for square pipes and 10x20 mm to 80x120 mm for rectangular pipes. For each size, it provides the outer diameter and wall thickness. It also specifies the chemical composition, mechanical properties, tolerances, standard length, and notes that non-standard orders can be further coordinated.

Uploaded by

gorry_cad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views

Square & Rectangular Tipe: Note: Pemesanan Diluar Standard Dapat Dikoordinasikan Lebih Lanjut

This document provides specifications for square and rectangular electrical resistance welded pipes. It lists various pipe sizes from 16x16 mm to 100x100 mm for square pipes and 10x20 mm to 80x120 mm for rectangular pipes. For each size, it provides the outer diameter and wall thickness. It also specifies the chemical composition, mechanical properties, tolerances, standard length, and notes that non-standard orders can be further coordinated.

Uploaded by

gorry_cad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SQUARE & RECTANGULAR TIPE

ELECTRICAL RESISTANCE WELDED SQUARE PIPE (EPS)

SIZE (mm) OD Tebal

16 x 16 20.2 1.0~1.8
20 x 20 25.4 1.0~2.0
25 x 25 32.0 1.0~3.2
30 x 30 38.1 1.0~3.2
40 x 40 50.8 2.0~3.5
50 x 50 63.5 2.0~3.8
60 x 60 76.3 2.0~4.0
75 x 75 93.5 2.0~4.0
90 x 90 113 2.0~4.0
100 x 100 125 2.8~4.0

ELECTRICAL RESISTANCE WELDED RECTANGULAR PIPE (EPR)

SIZE (mm) OD Tebal (mm)

Komposisi Kimia
10 x 20 19.1 1.0~1.8
Pospor (P) : 0.05 % Max
15 x 25 25.4 1.0~2.3 Belerang (S) : 0.05 % Max
15 x 30 28.6 1.0~3.0
Sifat Mekanis
16 x 40 35.6 1.0~3.0 Kuat Tarik (Tensile Strength) : 33 - 47 kgf/mm2 min
20 x 40 38.1 1.0~3.0 Regang (Elongation) : 20% min
HEAD OFFICE & FACTORY Panjang standard : 6000 mm
Jl. Imam Bonjol 4, Warung Bongkok, 25 x 50 48 1.0~3.0 Toleransi
Sukadanau, Cikarang Barat,
30 x 50 50.8 1.4~3.2 Tebal : Plus (+) tidak terbatas minus 8%
Bekasi 17520, West Java, INDONESIA
Sales Department
Panjang : + 2%
40 x 60 63.5 1.8~3.5
Phone DID : (62-21) 898 38 293 / 291
Phone Flexy : (021) 7085 3156 40 x 80 76.3 1.8~3.8 Product Tolerance : JIS G 3466
(021) 7085 3157
Fax. : 898 38 298, 8900-555 50 x 100 93.5 2.0~4.0
Note : Pemesanan diluar standard dapat dikoordinasikan lebih lanjut
e-mail : [email protected]
80 x 120 125 2.0~4.0

You might also like