Scribd
Upload
26 views

Appendix D1

This document contains information about calculating the required deformation to create hogging bending moment in a concrete beam based on its geometric and material properties. It includes the beam's cross-sectional area, moment of inertia, extreme fiber distances, section moduli, crack spacing, applied loading, concrete and rebar properties, dimensions, and a load-deflection graph. The goal is to determine the maximum deflection needed to induce hogging bending and the associated shear force based on the beam's properties.

Uploaded by

josefina
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Appendix D1

This document contains information about calculating the required deformation to create hogging bending moment in a concrete beam based on its geometric and material properties. It includes the beam's cross-sectional area, moment of inertia, extreme fiber distances, section moduli, crack spacing, applied loading, concrete and rebar properties, dimensions, and a load-deflection graph. The goal is to determine the maximum deflection needed to induce hogging bending and the associated shear force based on the beam's properties.

Uploaded by

josefina
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Appendix-D

Calculation of prescribed deformation required to creating the hogging bending


moment as per the Fig.3-23.

Geometric Properties

Gross Conc. Trans (n=7.17)

Area (mm 2) x 103 184.3 191.6

Inertia (mm 4) x 106 1883.6 2079.7


75
yt (mm) 340 339
1 - 20 MM
yb (mm) 107 108

447
St (mm 3) x 103
6 MM @ 200 mm
5545.8 6140.6

Sb (mm 3) x 103
2 - 20
17543.4 19199.5
7 - 7 MM
1200
Crack Spacing
2 x dist + 0.1 db /

Loading (N,M,V + dN,dM,dV)


0.0 , 0.0 , 0.0 + 0.0 , 0.01 , 1.0

Concrete Rebar
fc' = 40.0 MPa fu = 550 MPa All dimensions in millimetres
Clear cover to transverse reinforcement = 22 mm
Long, fy= 450
a = 19 mm Links, fy= 250 Corcon 300 mm Rib Beam
ft = 1.97 MPa (auto)

c' = 2.10 mm/m s = 180.0 mm/m Upul Perera 2003/2/27

Load-Max Deflection
54.0
Shear Force (kN)

45.0
36.0
27.0
18.0
9.0 1.7 mm
0.0
0.0 3.0 6.0 9.0 12.0 15.0
Maximum Deflection (mm)

D-1

You might also like