100% found this document useful (1 vote)
3K views

Electrical Boq

This document is a bill of quantities for electrical installation works. It lists 6 categories of work with various line items and specifications. The categories include lighting points, distribution boards and panels, wiring devices, isolators, guest room management and fire alarm systems, and testing. Quantities, units, rates, and amounts are provided for each line item. The document provides a detailed breakdown of materials, equipment, and labor needed for the electrical works.

Uploaded by

Ramadan Rashad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
3K views

Electrical Boq

This document is a bill of quantities for electrical installation works. It lists 6 categories of work with various line items and specifications. The categories include lighting points, distribution boards and panels, wiring devices, isolators, guest room management and fire alarm systems, and testing. Quantities, units, rates, and amounts are provided for each line item. The document provides a detailed breakdown of materials, equipment, and labor needed for the electrical works.

Uploaded by

Ramadan Rashad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Bill of Quantity for Electrical Installation Works

BOQ Ref. # Description Qty Unit Rate (QR) Amount (QR) Remarks

Lighting Points Including Containment, Wiring,


1 Fixing of Switch Plates and all required accessories
as per approved shop drawings etc.,
General luminaire lighting point - Conduit, Chipping &
1.1 1 Nos -
Wiring

1.2 General luminaire lighting point - Wiring Only 1 Nos -

1.3 General luminaire Spot Light -Each Circuit Wiring Only 1 Circuit

1.4 Emergency lighting point 1 Nos -

Install and connect the following Main /Sub-main


Distribution Boards, GRMS Panel with all necessary
accessories, inter-connections, Tray & Trunking
2
Fixing, Dressing & Termination etc. all as shown on
the drawings, as specified and as required for
proper operation:-

Complete Electrical Closet Room Including MDB, DB's


2.1 and GRMs Panels located Ground & First Floor c/w all 1 Job -
the works inside the Room.

Install and connect the Wiring Devices including


wiring and conduit and all required accessories etc.,
3
all as shown on the drawings as specified and as
required for proper operation:-

13A 3Pin Single/Twin Switched Socket Outlet @ high


3.1 1 Nos -
level, Above False Ceiling, Universal Type,W/proof etc.

3.2 Shaver Socket Outlet 1 Nos -

3.3 Cooker Control Unit And Cooker Connection Unit 1 No -

3.4 20A Switched Spur Unit 1 Nos -

ISOLATORS Includes Conatinment Tray/Trunking,


4 Cabling and Installation of Isolator as per site
Requirement

4.1 16A,20A,32A,40A,63A TPN - weatherproof 1 Nos -

Install and connect the Points for GRMS/ELV


System complete with all necessary accessories,
5 wiring, conduits, inter-connections, etc., all as
shown on the drawings, as specified and as
required for proper operation:-
Guest Room Management System -
5.1 1 Nos -
Containment, Wiring & Back Boxes
Fire Alarm System -
5.2 1 Nos -
Containment, Wiring & Back Boxes
5.3 ELV Containment Only 1 Nos -
Testing for the above items shall be to the approval
6 and satisfaction of the Engineer and the Owner 1 Item Included
Repesentative.

1 of 1

You might also like