Scribd
Upload
230 views

Virusolve Trigger

Virusolve+ is a high level disinfectant and cleaner that is effective against a wide range of pathogens including bacteria, viruses, fungi, and spores. It does not contain harmful chemicals like chlorine or aldehydes. Virusolve+ can be used to disinfect any surface, including medical devices, by diluting it to 5% and letting it dwell for 1 minute. It provides effective high level disinfection without damaging surfaces and helps control healthcare-associated infections.

Uploaded by

Fem Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
230 views

Virusolve Trigger

Virusolve+ is a high level disinfectant and cleaner that is effective against a wide range of pathogens including bacteria, viruses, fungi, and spores. It does not contain harmful chemicals like chlorine or aldehydes. Virusolve+ can be used to disinfect any surface, including medical devices, by diluting it to 5% and letting it dwell for 1 minute. It provides effective high level disinfection without damaging surfaces and helps control healthcare-associated infections.

Uploaded by

Fem Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Virusolve + Trigger Spray R

High Level Disinfection & Cleaning for Medical


Devices and ANY Surface
Guaranteed protection and performance, giving
total infection control - safely

Primary features attributable to Virusolve+ are:

High Level Disinfection and cleaning.


Does not contain chlorine or aldehyde compounds.
Effective against bacterial spores e.g.
Clostridium difficile (C dif), Bacillus cereus etc.
Effective over a wide range of pathogens
including mycobacteria, viruses, bacteria,
fungi, yeasts and moulds, including
MRSA, Hepatitis B and HIV.
Effective against the difficult non-
enveloped type viruses such as
Polio, Adenovirus and Norovirus.
Non-fixative.
Non-corrosive - will not
damage delicate coatings.
No activation required.
Cost effective.
No fumes.
Tested to EN14885 for
disinfection properties
in chemistry with
healthcare
Virusolve + R

A High Level Disinfection & Cleaning Fluid for Medical


Devices and ANY Surface

General Packaging
Virusolve+ is a patented proven HLD (High Level Disinfectant). The formulation Concentrate Ready to Use
does not contain any hazardous aldehydes or chlorine generating components. - 2.5 L container - 750ml trigger spray
Virusolve+ is highly effective as a cleaner and terminal HLD against bacterial - 5 L container - 5 L container
spores, mycobacteria, bacteria, fungi and viruses. The product is designed to - 25 L container - 25 L container
eliminate the risk of cross-infection from spores, TB, viruses, fungi and bacteria. - 210 L drum - 210 l drum
Virusolve+ does not simply render the microorganisms inert but has been - 1000 L IBC - 1000 L IBC
demonstrated to kill these by disrupting the RNA of the microorganisms.
It is safe to use on any surface and is odourless and colourless.

Virusolve+ Properties
Active Against Standards Contact Time
Spores EN13704 2 Minutes
EN14347 1 Minute
Mycobacteria EN14348
Mycobacterium terrae 1 Minute
Mycobacterium tuberculosis 1 Minute
EN14563
Mycobacterium terrae 5 Minutes
Mycobacterium avium 5 Minutes
Bacteria EN1276, EN13727, 1 Minute
EN13629, EN14561 5 Minutes
Viruses EN 14476
Polio, Adeno & Noro 5 Minutes
HIV, Hep B & C 1 Minute
Fungi / Yeasts EN1275, EN1650 1 Minute
EN13624, EN14562 5 Minutes

Application
General Surface Cleaning and Healthcare Environment:
For High Level Disinfection: Dilute Virusolve+ to 5% with water (50ml per litre) at 20C
Dispense / Spray (DO NOT MIST) Virusolve+ diluted solution directly onto the surface to be treated and wipe gently over the whole area with a clean low lint cloth.
Allow a minimum contact time of 1 minute before wiping clean or brushing to remove grease, blood and organic debris. Removal of stubborn deposits may be assisted by
the use of a stiff bristle brush. Rinse treated surface with clean water if required.

Virusolve+ solution has demonstrated efficacy in the presence of organic soil contamination and microbiological burden during reuse. The active constituents concentration of
Virusolve+ solution during its use-life must be verified by the Virusolve+ Concentration Test Kit or Test Strips. Virusolve+ must be discarded after 14 days even if the active
constituents are at or above the MEC. For MEC please refer to PIBS 08-006.

You might also like