Product Release Notes:

NComputing vSpace Server 6.6.9.1 for Windows

for L-series, M-series and vSpace Client
Product: NComputing vSpace Server

Version: 6.6.9.1

Supported Operating Systems:

Windows 7 SP1* (32-bit and 64-bit)
Windows Server 2008 R2 SP1
Windows Multipoint Server 2011 (WMS)

*Note: this release does NOT support any other earlier 64-bit or 32-bit
Windows operating systems (e.g. it does NOT support Server 2008 64-
bit or Server 2008 32-bit)

This vSpace software can be configured to deliver a Windows 7 end-user

experience through vSpace virtual desktops running on Windows Server
2008 R2 SP1, Windows Multipoint Server 2011, and single user
instances of Windows 7*. (For licensing details, see
www.ncomputing.com/mslicensing )

Supported NComputing Clients:

L-130
L-230
L-300
M-300
vSpace Client (1.6.1.8 or newer)

These notes contain important information, please read this entire

document prior to installing or upgrading.

Whats New:
This release replaces the previous vSpace Server build (6.6.2.3)
and includes improvements to specific third party software
compatibility as well as updated firmware for L-series and M-
series devices.

Key new features:

Windows Live Movie Maker Compatibility: Resolved
compatibility issues with Windows Live Movie Maker. This fix
requires a registry change on the host system. See
instructions under the Additional Changes section of this
document.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 1

 Client Name Variable: The Client Name Variable associated
with each session will now remain consistent from one login to
the next for each device. It will no longer change each time the
user logs in.
M300 firmware update (version 2.0.5): resolves issue where
local M300 firmware configuration could be corrupted,
requiring a manual device reset to defaults.

The sections that follow include important information on

additional changes, notes for installation and known errata. Please
read ALL of these Release Notes to ensure your deployment is as
smooth as possible.

Additional Information:
Resolving Windows Live Movie Maker compatibility: To
resolve DirectX related errors* encountered when trying to run
Window Live Movie Maker within a vSpace 6 session, create
the following DWORD type registry key:
HKEY Local Machine > System >
CurrentControlSet >Control > Multiuser >
Force32BitColor

DWORD Value = 1

If there are connected sessions using display resolutions of

1366 x 768 or higher, the following key must also be added:

HKEY Local Machine > System >

CurrentControlSet >Control > Multiuser >
Big32BitFB

DWORD Value = 1

*Note that Windows Live Movie Maker requires a DirectX

compatible graphics card or GPU (whether it is a discrete card
or an integrated chip on the motherboard). For this reason,
Windows Live Movie Maker will not function in most VM
environments.

Updated firmware versions:

o M300 version 2.0.54 is included in this vSpace build.
It is recommended that all M300 users update to this
version which resolves an issue where the firmware
configuration file could become corrupted when making
changes in the local firmware user interface.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 2

 o L300 version 1.6.3 is included in this vSpace build,
but is NOT a required update. L300 devices running
FW 1.6.0 do not need to be updated to this version.
The only change in this version is for future support of
180 degree screen rotation when in session.

Important installation notes on this release:

Upgrading an existing L-series vSpace host: to upgrade
from the previous vSpace L-6.6.2.3 release, run the new
installer over the existing installation.
Registration Required: All vSpace releases do require
registration. The Registration Wizard is now integrated into
the installer, and if direct Internet access is available on the
host (that is, TCP ports 80 or 3630 are open to the internet),
vSpace will register using the information collected during the
interactive install. Until your system is registered, registration
reminder popups will be displayed whenever an administrator
logs-in or whenever the NComputng Management Console is
launched. You can perform offline registration by emailing the
offline .txt file created by the registration wizard to:
[email protected]
Do not install on a system previously used as a U-series
or X-series host: This release is only intended to be
installed on a clean OS or to upgrade a current L-series
vSpace host. Do not install it on any host OS where vSpace
for the U- or X-series was previously installed.
Licensing server required: Microsoft RDS CALs (for
Server 2008 R2) or WMS CALs (for WMS) are required to
use the system in a multi-user configuration. You must also
implement a Microsoft licensing server to enable
connections. For more information on license requirements,
see www.ncomputing.com/mslicensing and refer to the
NComputing Knowledge Base for information on setting up
a license server (search on licensing or go to:
http://www.ncomputing.com/kb/How-to-Configure-a-Remote-
DesktopLicensing-Server-for-vSpace-6_281.html).
.MSI File running the vSpace_6.6.2.3_setup.exe file will
extract and copy a setup.msi file to the same directory
from which you launched the setup.exe file. The .MSI file
can be used for silent installation as described below.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 3

 Support for silent mode installation: This version supports
silent/centralized installation. To perform a silent install (and
registration if needed), please follow the instructions in the
following Knowledge Base articles:
www.ncomputing.com/kb/Installing-vSpace-from-the-Windows-
CommandLine_303.html
and

www.ncomputing.com/kb/vSpace-Silent-Registration_307.html

MSI Installer and Uninstaller Options: The MSI installer has

"ADDUSERS=0" available as a command line option to enable
silent installs while suppressing the popup window asking if
you want to add new users. An option is added to the
uninstaller to provide options for handling an existing vSpace
host license during a silent uninstall. The available options
when running from the Command Line are:
o "DELETELICENSE=0" do NOT remove vSpace license
o "DELETELICENSE=1" popup box will appear
o "DELETELICENSE=2" remove vSpace license without
popup

Windows MultiPoint Server 2011:

o Registry changes are still in place to support the
MultiPoint Configuration Wizard that enables repairs of
the MultiPoint installation and enables use of sysprep.
To accommodate these needs, the
LogonTimeout registry setting had to be
removed, and as a result, WMS 2011 sessions
left at the logon prompt will cycle about every 30-
60 seconds.
If you wish to prevent the logon screen from
cycling, you can manually add the LogonTimeout
setting in WMS2011 by creating the following key:
HKLM/SYSTEM/CurrentControlSet/Control/Termin
alServer/WinStations/RDP-Tcp/LogonTimeout
(Type = REG_DWORD, Value = 0x00000708
(1800))
o Make sure you have updated your WMS installation with
the latest update roll-up from Microsoft.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 4

 Tips and Performance Recommendations:
Memory Requirements: 64-bit operating systems in
general require double the memory of Server 2003;
therefore, if you are upgrading an existing vSpace 4 or
vSpace 5 host to a 64-bit operating system, please make
sure the host has both 64-bit processing support and
sufficient memory to accommodate the new operating
system and vSpace. See the user manual for specific
memory recommendations.
Add Users to Remote Desktop Users Group: The
supported Microsoft operating systems require User Group
assignments; so administrators will need to adjust user
account settings to add the userIDs into the "Remote
Desktop Users" group.
OS Settings: The Windows Power Options setting should
be configured to High Performance (under Control Panel >
Hardware > Power options). Microsofts default power
settings give a false impression that vSpace CPU utilization
is much higher than on previous 32-bit operating systems.
Windows 7 Desktop Theme: If you install the Windows
Server 2008 R2 Desktop Experience feature, start the
Themes system service and set it to autostart, then each
individual can personalize their virtual desktop to use a
Windows 7- themed interface. However, remote sessions do
not support the Aero window transparency feature for
overlapping windows.
Windows 7* Installation: If you install vSpace using the
setup.exe the setup application will automatically raise
your Windows 7 privileges prior to selecting the correct MSI
file. However, it you want to install vSpace onto Windows
7* directly from an MSI file, you must have administrative
rights, and unlike in Server 2008 R2, the actual
Administrator account is not enabled by default in
Windows 7. So, even though you may be logged-in as a
Windows 7 user thats a member of the Administrators
group, you still wont have sufficient administrative rights
to install vSpace 6 with an MSI and the installer will
generate an error message saying: You need
administrative rights to install this software. Installation
Failed.
You need to launch the Administrative Command Prompt
by going to All Programs > Accessories > Command Prompt
and then right-click and select Run as administrator. Once
the Administrative Command Prompt console pops up,
launch the installer using the following command:
> msiexec /i install-filename.msi

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 5

 SP1 update process: When updating from SP0 to SP1,
the best approach is to uninstall vSpace, then apply SP1
and then run the vSpace installer. If vSpace was in place
during the SP1 install, re-run the vSpace installer and select
the Repair option.
Best performing virtual desktop experience options:
please apply the recommendations contained in: Windows
Tuning Guide for vSpace 6
(http://www.ncomputing.com/kb/Windows-Tuning-Guide-for-
vSpace-6_297.html).

Browsers: Google Chrome has been found to use less

system resources than Mozilla Firefox and Internet Explorer
(IE) and is therefore recommended for virtual desktop
environments when many instances of the browser are
launched. Administrators may wish to configure the OS to
replace IE as the default browser application for internet
access. However, if you choose to use Internet Explorer for
browsing:
For IE6, IE7, and IE8, turn ON Internet Explorers option
to "Force offscreen compositing even under Terminal
Services". This setting will prevent the screen flickering
that can occur with some web applications when using
Internet Explorer in a vSpace virtual desktop. Microsoft
removed that option from Internet Explorer 9, so for IE9,
enable the Use software rendering instead of GPU
rendering option as described in Microsoft KB 2528233
located at: http://support.microsoft.com/kb/2528233
The IE Enhanced Security feature can slow down
internet traffic and prevent the browser from working
efficiently which may degrade the performance of videos
played through the browser. We recommend either
uninstalling the feature or using a different web browser.
Escaping out of Autoconnect: When autoconnect is
enabled on the L300 or M300 and you wish to access the
devices setup screens, use the "Esc" key during the boot
cycle to exit the autoconnect process and reach the device
setup screens.
DirectX is enabled by default (setting for
HKLM/SYSTEM/CurrentControlSet/Control/Multiuser/Disabl
e DirectX is set to 0. Note that with this setting if an
Administrator attempts to connect to a disconnected L300
session from the host machine, the system could become
unstable. Also, you may encounter problems with Windows
Media Player. If you do, you should either: 1) not have a
user logged into the host session, 2) turn off the Aero
interface on the host session, or 3) uninstall the native video
card driver on the host and install the default Windows VGA
driver.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 6

 As with vSpace 6.5.1.10, administrators can limit allowed
user sessions to a number lower than specified by the
vSpace license: This capability combined with the L300s
auto-failover and server group feature will allow you to
implement load balancing so that no server accepts more than
a specified number of sessions.

To use this capability, you must manually create two new

Registry entries under the registry CurrentControlSet
MultiUser key:
EnableUserLoadBalance as a DWord with a value of 1
(after creating this, you can change the value to 0 to
disable)
MaxConnectionCount as a DWord with a value less than
the license count (the value 0xFFFFFFFF means use the
count defined in the license)
MaxConnectionCount is the total number of current
active session connections. Any disconnected
sessions will NOT be counted when vSpace calculates
this value.

Errata Items:
Disabling vSpace remote USB support in the NComputing
Management Console requires a system reboot before the
setting takes effect.
Windows Portable Devices (WPD) notice: is a Microsoft
driver technology designed for portable devices (that
contain a CPU) such as mobile phones, PDAs, digital
cameras, and portable media players. If one of these smart
player type devices has ever been installed on your vSpace
host, remotely connected USB drives may show up in
Device Manager under BOTH disk drives and portable
devices. In this case, you may see yellow exclamation
point warning symbols next to the portable device entries.
This is expected behavior and the USB drives will operate
normally.
Video Streaming: If you overlay other windows on top of a
streaming video, the information (text) in the overlaid window
may become distorted. Whether or not this distortion occurs
depends on the original resolution of the video source and
whether the video is being scaled up on the desktop.
"Safely remove hardware" or "Eject" commands do not
apply to USB devices plugged into an L300 or an M300 and
you dont need to use the commands before removing a USB
device.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 7

 Kiosk mode is not supported by default in Windows 7. To
enable kiosk mode for Windows 7 you must manually add the
following DWORD to the registry (advanced users only):
Key:
KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal
Server
Value: "HonorLegacySettings" = (DWORD) 1

Advanced Performance Profile settings:

o The Maximum Frame Rate setting in the Performance Profiles only affects
Windows Media Player. Other media players are not affected by this
setting.
o The Cursor Shadow and Blinking Cursor setting in the Advanced
Performance Profiles currently do not affect sessions.
o The Video Quality slider in the L-series/M-series settings tab is overridden
by settings in the Advanced Performance Profiles. Even when the Default
profile is selected, the video quality slider has no effect. To change the
video quality settings, please use the new Performance Profiles.
o The Mono audio setting only applies to vSpace Client when also set for 11
kHz audio and 8-bit sound. The setting does not affect the L300 or M300.

*Windows Server and appropriate client access licenses are required for multiuser
environments using NComputing products. Client operating systems such as Windows
XP, Windows Vista and Windows 7 are appropriate for single user applications such
as 1:1 VDI, display systems and remote access. Additional information on licensing is
available at www.ncomputing.com/mslicensing including frequently asked questions.

Contacting Technical Support and Additional Resources

Visit the NComputing Knowledge Base at www.ncomputing.com/kb for more information.
To request Technical Support, please visit the NComputing Support page at
www.ncomputing.com

Disclaimer
Information contained in this document may have been obtained from internal testing or from a
third party. This information is for informational purposes only. Information may be changed or updated
without notice. NComputing reserves the right to make improvements and/or changes in the products,
programs and/or specifications described herein anytime without notice.
All NComputing software is subject to NComputing intellectual property rights and may be used only in
conjunction with Genuine NComputing hardware and in accordance to the NComputing End User Licensing
Agreement and Terms of Use.

www.ncomputing.com

Copyright 2003-2012 NComputing, Inc. All rights reserved. NComputing is the property of NComputing.
Microsoft, Windows and XP are registered trademarks of the Microsoft Corporation. Other trademarks
and trade names are the property of their respective owners. Specifications are subject to
change without notice. Performance may vary, depending on the configuration of the shared computer.

vSpace L-6.6.9.1 Release Notes March 25, 2013 Page 8