Scribd
Upload
183 views20 pages

Classification of Handtools

This document classifies and identifies various types of hand tools used in carpentry and construction. It divides the tools into three categories: measuring tools, marking and lining tools, and testing tools. Within each category, several specific tools are defined, with descriptions of how each tool is used. Measuring tools include push-pull rules, rulers, meter sticks, try squares, and calipers. Marking and lining tools include pencils, marking gauges, chalk lines, dividers, and compasses. Testing tools include try squares, steel squares, spirit levels, and plumb bobs. References for further information are also provided.

Uploaded by

Kring Realina Fontejon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
183 views20 pages

Classification of Handtools

This document classifies and identifies various types of hand tools used in carpentry and construction. It divides the tools into three categories: measuring tools, marking and lining tools, and testing tools. Within each category, several specific tools are defined, with descriptions of how each tool is used. Measuring tools include push-pull rules, rulers, meter sticks, try squares, and calipers. Marking and lining tools include pencils, marking gauges, chalk lines, dividers, and compasses. Testing tools include try squares, steel squares, spirit levels, and plumb bobs. References for further information are also provided.

Uploaded by

Kring Realina Fontejon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

CLASSIFICATION OF

HANDTOOLS
PILITA R. SANTOS
IA-CIVIL TECHNOLOGY
TECHNOLOGY AND LIVELIHOOD EDUCATION
PARAAQUE NATIONAL HIGH SCHOOL MAIN
Monday, November 3, 2014
OBJECTIVES

Classify measuring, marking lining,


and testing hand tools
Identify measuring, marking lining,
and testing hand tools
HAND TOOLS Part 1

Measuring Tools
Marking Lining Tools
Testing Tools
MEASURING TOOLS

Push-Pull Rule
Ruler
Meter Stick
Try Square
Caliper
Push-Pull Rule

flexible tape that


slides into a material
case and it is used to
measure irregular
and regular shapes.
Ruler

used for measuring short pieces of


stock.
Try Square

Used for checking


flatness and
squareness
Caliper

used for measuring


diameter.
MARKING LINING TOOLS

Pencil
Marking Gauge
Chalk Line
Divider
Compass
Pencil

used to layout or
mark cutting
lines.
Marking Gauge

wood or metal tool


consisting of a
beam, head and a
point used to mark
a line parallel to
the grain of the
wood.
Chalk Line

used to establish
a straight line on
a surface.

www.toolstop.co.uk
Divider

tool with two


metal legs used
to lay-out an arc
circle or step off
division on a line.
Compass

used to scribe
arcs and circles.
TESTING TOOLS

Try Square
Steel Square
Spirit Level
Plumb bob
Try Square

tool used in
squaring,
measuring and
testing the
squareness of a
piece of wood.
Steel Square

framing square used


to mark out the work
for squaring and
checking of angles
and is used in the
construction of roof
framing and large
furniture.
www.craftsmanspace.com
Spirit Level

tool used for


testing vertical and
horizontal surfaces.

shop.adjustplus.biz
Plumb bob

tool used to test


the vertical
alignment only.

professional-power-tool-guide.com
References

IA-Civil Technology
www.craftsmanspace.com
www.toolstop.co.uk

You might also like