100% found this document useful (1 vote)
514 views

How To Improve Code and DL Power Congestion

1) There was a customer complaint about capacity issues and low HSUPA throughput during special events in a hot spot area where many special events occurred. 2) Analysis of KPIs showed high code and DL power congestion. Parameter checks revealed non-optimal settings. 3) Testing showed good signal strength but confirmed the issue was high traffic during events.

Uploaded by

Sandeep
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
514 views

How To Improve Code and DL Power Congestion

1) There was a customer complaint about capacity issues and low HSUPA throughput during special events in a hot spot area where many special events occurred. 2) Analysis of KPIs showed high code and DL power congestion. Parameter checks revealed non-optimal settings. 3) Testing showed good signal strength but confirmed the issue was high traffic during events.

Uploaded by

Sandeep
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 13

High code and DL power congestion issue

High code and DL power congestion issue

HUAWEI TECHNOLOGIES CO., LTD.


Oct 2013

Prepared by: -
Mr. Sanjeev K Sharma
Staff ID-00702301
Dept. GSRC India

2017-08-26 HUAWEI CONFIDENTIAL Page1,


Total13
High code and DL power congestion issue

Symptoms

In country X, City Y, Customer complaint about Capacity issue and low HSUPA throughput

during Special events. Complaint area is hot spot and mostly special event happened there.

Alarm

No Active alarm on surrounding sites.

2017-08-26 HUAWEI CONFIDENTIAL Page2,


Total13
High code and DL power congestion issue

Cause Analysis

1. Congestion KPIs analysis:- From the KPI can see many code cong and DL Power cong.

Network
recommended value

2. Parameter setting verification

Current
setting

Network
recommended value

2017-08-26 HUAWEI CONFIDENTIAL Page3,


Total13
High code and DL power congestion issue

Network
recommended value

Current
setting

2. DT held at the complaint spot.

I-Site location

Current
setting

2017-08-26 HUAWEI CONFIDENTIAL Page4,


Total13
High code and DL power congestion issue

ii. Google Location

2017-08-26 HUAWEI CONFIDENTIAL Page5,


Total13
High code and DL power congestion issue

iii.Outdoor test RSCP

iv. Outdoor Test ECNO

From the above test result, RSCP and ECNO are quite good at the complaint location. We notice
that there is not any coverage problem. Only problem of high traffic during the special event thats
why get customer complaint.
2017-08-26 HUAWEI CONFIDENTIAL Page6,
Total13
High code and DL power congestion issue

Handling Process
1. Parameter optimization

Purpose to implement below action to reduce DL power congestion and code congestion:

1- Purpose to change PCPICH power and Maxtxpower setting on site NTB6709 as below:

PCPICH- PCPICH- Maxtxpower- Maxtxpower


CELL NAME CI
current recommend current -recommend

NTB6709U_8NB01_S03 722 300 310 400 430

NTB6709V_8NB01_S01 12547 330 310 430

NTB6709V_8NB01_S03 12557 300 310 400 430

NTB6709W_8NB01_S01 22337 330 310 430

NTB6709W_8NB01_S03 22347 300 310 400 430

2- Change HSPDSCH Code number from 5 to 2.

3- Downlink CAC parameter optimization as below standard:

DLCONVAMRTHD DLCONVNONAMRTHD DLOTHERTHD DLHOTHD DLCELLTOTALTHD

90 90 85 92 95

4- Down link LDR action changing as below standard

DLLDRFIRSTACTION DLLDRSECONDACTION DLLDRTHIRDACTION

CodeAdj BERateRed InterFreqLDHO

5- Common channel power changing

Current Recommend
Command Parameter
Value Value

2017-08-26 HUAWEI CONFIDENTIAL Page7,


Total13
High code and DL power congestion issue

Result
MOD UCELL PSCHPower -5 -8

MOD UCELL SSCHPower -5 -8

MOD UCELL BCHPower -2 -5

MOD
AICHPowerOffset -6 -9
UAICHPWROFFSET

MOD
PICHPowerOffset -7 -10
UPICHPWROFFSET

MOD USCCPCH PCHPower -2 -5

6- LDM parameter changing to make UE entry LDR status quicker

DLLDRTRIGTHD DLLDRRELTHD

current value 70 60

recommend value 60 50

7- 1B event threshold changing to make UE leave active set easier and reduce SHO
overhead.

INTRARELTHDFOR1BCSVP INTRARELTHDFOR1BCSNVP INTRARELTHDFOR1BPS

current value -12 -12 -12

recommend value -10 -10 -10

Parameter changing script:

Parameter
changing mml.txt

Application of Cell is recommended to satisfy high traffic requirement.

2017-08-26 HUAWEI CONFIDENTIAL Page8,


Total13
High code and DL power congestion issue

After Change parameter KPI Get normal.

RRC Setup Success Ratio (service)(%)

CS RAB Setup Success Ratio (Cell)(%)

2017-08-26 HUAWEI CONFIDENTIAL Page9,


Total13
High code and DL power congestion issue

RAB Establishment Success Rate - PS(%)

VS.CS.AMR.Call.Drop.Cell.Rate(%)

2017-08-26 HUAWEI CONFIDENTIAL Page10,


Total13
High code and DL power congestion issue

VS.PS.Call.Drop.Cell.Rate(%)

2017-08-26 HUAWEI CONFIDENTIAL Page11,


Total13
High code and DL power congestion issue

VS.RRC.Rej.Sum

VS.RAB.FailEstabCS.Cong

VS.RAB.FailEstabPS.Cong

2017-08-26 HUAWEI CONFIDENTIAL Page12,


Total13
High code and DL power congestion issue

For such kind of issue, you can have try by changing the suggested parameter.

Suggestio
n

2017-08-26 HUAWEI CONFIDENTIAL Page13,


Total13

You might also like