Scribd
Upload
436 views

Moment Connection Design

This document summarizes the design of a bolted splice connection between two steel members. Key details include a bolt diameter of 20mm with 24 total bolts in 2 rows. Calculations show the tension in one bolt is 149.62kN, exceeding the allowable of 141.15kN, so the bolt size needs revision. The plate thickness of 30mm was determined to be adequate to resist the bending moment of 2.366kN-m. The combined shear and tension stresses in one bolt were found to exceed the limit stated in IS:800-2007, so the bolt size is required to be revised.

Uploaded by

maheshbandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
436 views

Moment Connection Design

This document summarizes the design of a bolted splice connection between two steel members. Key details include a bolt diameter of 20mm with 24 total bolts in 2 rows. Calculations show the tension in one bolt is 149.62kN, exceeding the allowable of 141.15kN, so the bolt size needs revision. The plate thickness of 30mm was determined to be adequate to resist the bending moment of 2.366kN-m. The combined shear and tension stresses in one bolt were found to exceed the limit stated in IS:800-2007, so the bolt size is required to be revised.

Uploaded by

maheshbandham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN CODE IS:800-2007

SECTION DATA LOADING


WEB DEPTH 1150 MM WEB THICK 16 MM Moment(Mz) kN-M 1150 Axial (Fx) kN 711 584
FLANGE WIDTH 150 MM FLANGE THIC 24 MM Shear Force (Fx) kN 970

BOLT DATA SUMMARY OF RESULTS


BOLT GRADE 8.8
Dia of Bolt 20 mm Bolts
Number of bolts(n) 20 mm Description Actual(kN) Allowable (kN) Result
Pitch 90 mm Tension in bolt 149.62 141.15 NotGood
Gauge 90 mm Shear in bolt 48.50 90.54 Safe
No of bolt rows 2 nos Combined stress ratio 1.4106 >1Revise Bolt Size
Stich Bolts(n1) 4 nos Plate
Total number of bolts(n'= n+n1) 24 nos Description Provided Required Result
Thickness of plate 30.00 26.56 Safe

SPLICE PLATE DETAILS


Depth 1330 mm SPLICE PLATE DETAIL
Width 180 mm
Thickness 30 mm
Yield Stress(fy) 350 N/mm2

Material Properties
Plate Bolt
Yield Stress (fy) 350 640 N/mm2
Ultimate Stress (fu) 450 800 N/mm2

Allowable Capacitiy of Bolt

Design Tensile strength of bolt (Tdf) 141.15 kN

Code Reference (0.9 fub *An/mb) -Cl- 10.3.5 of IS:800-2007

Design Shear strength of bolt (Vdf) 90.54 kN


(fu/3 * (nn*Anb+ns*Asb)/mb) -Cl - 10.3.3 of IS:800-
Code Reference
2007

CALCULATION OF ACTUAL FORCE IN THE BOLT Check bolt for combined shear and tension

Calculation of Tension Capacity of bolt due to moment (Vsf/ Vdf)2 + (Tf/ Tdf)2<1
Cl - 10.4.6 of IS:800-2007
Effective
Tension in bolt
Bolt bolt
Bolt n*r2 due to moment (149.62/141.15)^2 + (48.5/90.54)^2
Distance(mm) distance
Mz*nr2/r
mm ( r )
1 0.045 - -
2 0.135 0.09 0.02 8.71 1.124 + 0.29
3 0.225 0.18 0.06 17.42
4 0.315 0.27 0.15 26.13 1.4106 >1Revise Bolt Size
5 0.405 0.36 0.26 34.84
- - - - Check for Plate thickness
- - - -
6 0.925 0.88 1.55 85.16 Tension in the plate ,T 149.62 kN
7 1.015 0.97 1.88 93.87
8 1.105 1.06 2.25 102.57 Maximum bending moment
9 1.195 1.15 2.65 111.28 M 2xTx P/8
10 1.285 1.24 3.08 119.99 M 3.366 kN-M
nr2 11.88
Thickness plate required
Actual Tension due to moment Tm 119.99 kN tp 6xMx1.1/(fyxg)
tp 26.56 MM
Actual Tension due to Axial Force Tx Fx/n'
Tx 29.63 kN

Total tension in the Bolt Tf = Tm+Tx 119.99 + 29.63


Actual Tension in the bolt ,Tf 149.62 kN

Actual Shear in the bolt Vsf Fy/n


Vsf 48.50 kN

You might also like