TC No.

58396-260(80366370)
MATERIAL TEST REPORT
DATE: 2016.12.05
EN 10204-2004 Type 3.1
PAGE: 1 OF 3

CUSTOMER QUANTITY PART No. PRODUCT CODE PRODUCT DESCRIPITION

NEWAY FLOW CONTROL, INC-CSV 1 11059884 3FP-BS9J-A105N-72333-NC BALL VALVE,3BS9J V5,C40/73333 [-TL,-B7M/2HM]
SIDE ENTRY, FORGED, TRUNNION MOUNTED BALL VALVE 3 900LB
ASTM A105N A105N+ENP/NYLON 12
RTJ END

PRESSURE TEST(MPa/PSI) OTHER INSPECTION

PURCHASE ORDER: 1035632 CSV_5734
HYDROSTATIC PNEUM RESULT VISUAL DIMENSION OPERATION MARKING

SHELL SEATS/BACKSEAT SEATS Accepted Accepted Accepted Accepted Accepted

PROJECT: N/A
23.1/3350 16.9/2451 0.6/87

PROJECT No.: N/A

APPLICABLE STANDARDS AND SPECIFICATION:

- P/T RATING: ASME B16.34
- MAIN MATERIAL: RELEVANT ASTM STANDARD
- DESIGN: API6D ASME B16.34
- TEST: API 6D
NOTE:ALL RELATED STANDRADS ARE THE LATEST VERSION UNLESS SPECIFIED BY PURCHASE ORDER.
- VALVES CONFORM TO NACE STANDARD MR.0175 LATEST REVISION

We hereby certify that the valves listed above are manufactured and tested in

WITHNESSED BY:__________ accordance with the requirements of valve standard and purchase order

NEWAY VALVE
Q.C. Manager
Address: NO.666 TaiShan SuZhou New District China Tel:86-512-666-51365 Fax:86-512-666-51360 http://www.newayvalve.com
 TC No. 58396-260(80366370)
MATERIAL TEST REPORT
DATE: 2016.12.05
EN 10204-2004 Type 3.1
PAGE: 2 OF 3

PRODUCT TRACEABILITY TABLE

MATERIAL CODE AND HEAT NO. MATERIAL CODE AND HEAT NO.
PRODUCT PRODUCT
SERIAL NO. BODY BONNET WEDGE/DISC CLOSURER SERIAL NO. BODY BONNET WEDGE/DISC CLOSURER
NO. NO.

A105N A105N A105N A105N A105N A105N A105N A105N

58396-260-15 HY1178 XT1141 XT1141 SMEH067 /

Address: NO.666 TaiShan SuZhou New District China Tel:86-512-666-51365 Fax:86-512-666-51360 http://www.newayvalve.com
 TC No. 58396-260(80366370)
MATERIAL TEST REPORT
DATE: 2016.12.05
EN 10204-2004 Type 3.1
PAGE: 3 OF 3

MATERIAL COMPONENT AND PROPETRIES

Material Heat treatment TempC(F) Holding time(h) Cooling media Furnace

A105N NORMALIZE 850~920(1562~1688F) 1H/25MM,1H AIR ELECTRIC
We hereby certify that the material are manufactured, inspected and tested in
accordance with the material specification and purchase order requirements.

PART NAME MATERIAL HEAT NO. CHEMICAL ANALYSIS MECHANICAL PROPERTIES

C Si Mn P S Cr Ni Mo Cu V TS YS E R HARD IMPACT TEST VALUE

C.E.
% % % % % % % % % % MPa MPa % % HB TEMP C:-29
MAX. 0.350 0.350 1.050 0.035 0.040 0.300 0.400 0.120 0.400 0.080 187 Avg: 27 Min:22
MIN. 0.000 0.100 0.600 0.000 0.000 0.000 0.000 0.000 0.000 0.000 485 250 22 30 1 2 3

BODY A105N HY1178 0.210 0.190 0.950 0.017 0.010 0.040 0.020 0.002 0.030 0.003 0.381 550 280 36 74 152

BALL A105N SMEH067 0.190 0.210 0.930 0.011 0.009 0.032 0.018 0.001 0.026 0.008 0.356 553 305 49 62 168

CLOSURE L A105N XT1141 0.200 0.230 0.920 0.020 0.010 0.030 0.010 0.004 0.050 0.002 0.365 510 355 32 59 170

CLOSURE R A105N XT1141 0.200 0.230 0.920 0.020 0.010 0.030 0.010 0.004 0.050 0.002 0.365 510 355 32 59 170

Address: NO.666 TaiShan SuZhou New District China Tel:86-512-666-51365 Fax:86-512-666-51360 http://www.newayvalve.com