Scribd
Upload
52 views

Water Pumping With Solar Power: Day or Night Pumping

This document discusses three methods for powering water pumps with solar energy: 1) Pumping day or night using batteries for energy storage. This allows pumping anytime but adds costs for batteries and inverter. 2) Using an AC variable frequency drive to power large AC pumps directly from a large solar array, only when the sun is shining. 3) A simple direct DC connection from solar panels to a small submersible DC pump, allowing pumping only when the sun is out. The size of the solar array and pump depends on the water needs.

Uploaded by

alexesc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
52 views

Water Pumping With Solar Power: Day or Night Pumping

This document discusses three methods for powering water pumps with solar energy: 1) Pumping day or night using batteries for energy storage. This allows pumping anytime but adds costs for batteries and inverter. 2) Using an AC variable frequency drive to power large AC pumps directly from a large solar array, only when the sun is shining. 3) A simple direct DC connection from solar panels to a small submersible DC pump, allowing pumping only when the sun is out. The size of the solar array and pump depends on the water needs.

Uploaded by

alexesc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

APP NOTE NUMBER

Rev 2
Water Pumping with Solar Power

Of all the ways solar electricity benefits the people on Earth, none makes as much difference
in the daily lives as pumping water. By providing water for irrigation, or potable water has
obvious benefits for people in rural areas and especially for those in developing nations.

There are 3 different ways that water pumps can be connected to PV modules. The proper
choice is determined by application specific factors like how much water is required and
whether the water should be available at night or just during high sun hours. This paper
provides a simplified overview of these 3 different systems for general education.

DAY OR NIGHT PUMPING


This method uses a battery for energy storage for
PUMPING DAY OR NIGHT
easy pump starting and so water can be pumped
SMALLER at any time.
ARRAY OF
PV
MODULES This method has some significant advantages.
Water can be pumped during the day or night, in
CHARGE
any weather. This can be critical for such
CTLR applications as diverting flood waters, or providing
BATT
potable water during emergencies.
INVERTER
The battery adds some cost, but since the PV
array does not have to be large enough to start
The water is
pumped to the
the pump, the system cost can actually be lower.
surface An MPPT solar charge controller optimizes the
anytime day or ANY SIZE
energy harvest from the array and the inverter
night. AC PUMP converts the DC to solid AC power for almost any
SINGLE PHASE pump. The pumps can be any size and single
OR 3 PHASE
phase or 3 phase.

Designing this system starts with selecting the


pump to meet the water needs. The inverter and
battery are sized to provide enough power to
drive the pump. The PV array must simply recharge the battery in the daytime.

Apollo Solar manufacturers systems that include the MPPT Charge Controller, the Inverter
and all the circuit breakers and connection points to make installation fast and easy. These
Pre-Wired Panel (PWP) systems are modular by design so they can be stacked up to provide
from 3.2kW to 32kW of power for a variety of pump sizes. The fact that one size can provide
the wide spectrum of needs means that the local distributor need only stock and support a
single product.

_______________________________________________________________________
23 F. J. Clarke Circle Apollo Solar, Inc. Phone (203) 790-6400
Bethel, CT 06801 www.ApolloSolar.com fax (203) 792-0300
Page 2 of 2 Water Pumping with Solar Power

AC MOTOR DRIVE AND AC PUMPS


For high amounts of water, a large AC pump is
AC 3 PHASE PUMPS usually required. These pumps require well
LARGE ARRAY OF PV MODULES
regulated 3 phase AC voltage and current.

By using an AC variable speed controller called a


Variable Frequency Drive (VFD), the pump motor will
have the proper voltage and current. The trick is to
supply DC from the PV array directly into the DC bus
inside the VFD. The normal AC input is not used.
3 PHASE VFD
MOTOR
As the sun rises and PV voltage and current
DRIVE increase, some VFD products will accept the input
The water is and when the power is high enough, it will start the
pumped to the pump. The PV array must be large enough to
surface when provide enough power to start the pump with
the sun including the head of water. The size of the PV array
shines. LARGE AC required for this method can be very expensive.
3 PHASE
PUMP
This method will only pump when there is plenty of
sunshine, but large pumps can be driven by large PV
arrays. Selecting the right pump and the VFD are
critical factors then they will dictate the size of the PV
array.

DIRECT CONNECT

SIMPLE DIRECT DC CONNECTION


The most basic (and most elegant) system is a Direct
ARRAY OF PV MODULES
Connection from the PV Array to the DC Pump. As
long as there is good sunshine, the pump will work.
The water is either used as it is pumped from the
ground, or it is stored in a pond or tank that is higher
than the eventual need for the water. When the sun
goes down, or during dark days, the stored water is
available for use because gravity will deliver it.

The limitation is that the direct connect pumps are


rather small. And since the pump must work over a
wide range of voltage and current, they can be
The water is expensive.
pumped to the
surface when The direct connect plan is difficult to beat for rural
the sun shines. areas or developing nations where keeping things
SMALL simple is the key to long life and easy support.
SUBMERSABLE
DC PUMP
Designing the system is a matter of selecting the
proper pump which will provide the amount of water
required. Then the pump specs will dictate how many
PV modules are required.

__________________________________________________________________________
23 F. J. Clarke Circle Apollo Solar, Inc. Phone (203) 790-6400
Bethel, CT 06801 www.ApolloSolar.com fax (203) 792-0300

You might also like