MODEL QUESTIONS ON CP 189-2006 |. Documentation of certificates is responsil a. Employer b. ASNT level Ill of the employer c. Any designated representative of the employer d. Any of the above ity of . The NDT personnel shall be recertified when, a. Five years have passed for Level | or Il b. Ten have passed for Level I! c. The ASNT Level III certification expires for Level Iil d. All of the above e. Aand B only . Ina closed Book examination a. No reference material is to be used b. ASME or relevant published codes may be used c. Any reference material approved and supplied by employer may be used d. Alllof the above may be used e. None of the above |. Determination of the significance of a relevant indication is called as, a. Inspection b. Assessment c. Interpretation d. None of the above . Different ways of doing a test, such as contact Ultrasonic testing or Immersion Ultrasonic testing are called test Methods Techniques ‘Types All of the above None of the above paocD . A Trainee shall work with a. Any certified person b. Any certified person so designated by the company Level I! c. Any person nominated by the employer if it is written so in the written practice d. A certified person , under the direction of LEVEL I! & LEVEL Ill7. A practical check list a. Must be in a written format b. Is needed for Level | AND Level Il examination only ¢. Should have minimum 10 check points d. All of the above 8. A candidate was examined for vision test. The test was conducted by a certified Optometrists and contained following information, Candidate wore contact lenses during examination Test chart: Jaeger, Illumination: 500 Lux, Eye chart distance:10” Test result: Left eye: Jaeger 1, Right eye: Jaeger 2, As the company Level Ill would approve the candidate? a. Yes b. No, because eye vision must be Jaeger 1 in both eyes c. No, because contact lenses are not acceptable d. You would not accept the test for some other reason besides b 9. Who can work as a NDT inspector? a. Any specialized person such as a Metallurgist, Welding engineer etc, who are nominated by the company Level III Only ASNT Level lil personnel Only the company Level II! Instructors certified or authorized by ASNT Irrelevant from code point aes 10.Practical examination is to be done for Level I certification. The candidate will be using three different techniques. How many test samples he must be examined on? a. Two b. Four ©. Six d. None of the above 11. The Level | and Level il general examinations must be Prepared by a Level Ill Administered by a Level I! Graded by a Level II All of the above None of the above ee9cD 12.When a certified individual has not carried out any inspection for more than 12 months in the method qualified in, the employer, May suspend his certificate Must suspend his certificate Must revoke his certificate May consider that certificate as lapsed aogn13. The Level Ill practical examination a. May include procedure writing and practical test b. Must include procedure writing and practical test c. Must include procedure writing and practical test and reporting d. None of the above 14.A company has hired an ASNT Level Ill individual, Prior to his ion and Approval he shall be classified as a a. ee b. Level! c d Level Il |. None of the above 415.To receive credit for training hours the candidate must Have documental proof of class attendance Have documental proof of having performed practical tests Have documental proof of education None of the above Only a and b paoop 16.As per CP-189-2006, May an employer deviate from the minimum requirements to meet his specific need? a. Yes, employer shall modify the guidelines to meet his needs, since it is recognized that these guidelines may not be appropriate for certain ‘employer's Circumstances or applications. b. No, these guidelines shall be strictly followed c. Yes, certain employers are permitted to deviate from the guidelines d. Employer can have additional unique requirements besides the CP- e, 189-2006 requirement 417.Who is responsible for the evaluation of the services of outside organization ‘a. Employer b. LEVEL III of the employing organization c. Employer of the Outside Organization d. LEVEL Ill Of The outside organization 48.Who is responsible for the the services outside organization a. a) Employer b. b) LEVEL Ill of the employing organization c. c) Employer of the Outside Organization d. d) LEVEL III Of The outside organization19.As per CP-189-2006, how many NDT LEVELS are there a8 b 5 6 d. Basically three Levels But Can be subdivided more to suit the employer needs 20.Who has to Designate NDT Instructor a. Employer b. LEVEL Il of Company c. Appointed as pr ASNT Code by the Jurisdictional agency d. Any of the above 21.It is found An ASNT NDT Level iii of the organization received bribe a. So Employer may suspend his service and he ceases to become ASNT LEVEL II b. Employer May revoke his service and he ceases to become ASNT LEVEL Ill c. Employer May revoke his service and he ceases to become LEVEL Ill of the origanisation and he may inform ASNT about violation of ethics d. None 22.A LEVEL Ill of XYZ origination was originally certified on 24/12/2003. His Employer has revoked his service on 1/05/2008. Can he be reinstated 01/01/2009 a. Yes it is with in 12 month period b. Not is more than 6 month period ¢. Itis due to the invalidity of certificate d. Revocation cannot be reinstated. Only suspended can be reinstated 23.Vision Acuity is as per J2 Snellen 20/30 Shades of gray all None paeee 24.4 LEVEL Il Candidate F: n test due to primary color blindness . Then he can be used for which test If the employer approves Visible PT Fluorescent MT RFI He can never do any NDT inspection aeco25.For radiographic interpretation LEVEL |, what is training hours for Non Radiographer as per CP -189-2006 a. 18 hours b. 22 hours ¢. 40 hours d. None 26.For radiographic interpretation LEVEL II, what is training hours for Non Radiographer as per CP -189-2006 a. 18 hours b. 22 hours c. 40 hours d. None 27.For radiographic interpretation LEVEL Il, what is training hours for LEVEL | Radiographer as per CP -189-2006 a. 18 hours b. 2 hours c. 40 hours d. None 28.For RT LEVEL! to become RFI LEVEL Il how Much Experience in film viewing is needed a. 2100 hours, and 100 films b. 1000 films and 1000 hours c. 1000 films and 24hours d. 1000 films and 2100 hours 29.To become RFI LEVEL Il a. Only Training hours is the criteria b. Both training hours and the number of films viewed are the criteria c. Both training hours and the number of films viewed in each casting, welding and artifacts are the criteria d. None 30. Artifact means Defects in forging Base metal defects made artificially on the surface Problems like film marks, Processing marks, Screen marks etc Itis the problem due to inspector eye sight. aoe 31. Totally how Many Limited certification are allowed as per CP-189-2006 ane b. 3 CaS d. To suit the Employer requirements32.Choose the correct answer a. All techniques are limited certification b. All methods are limited certification c. All limited certification are methods d. Alll limited certification are techniques 33.Remote Field testing is a. Method b. Technique c. Limited Certification d. none 34.B Scan thickness Measurement a. Method b. Technique c. Limited Certification d. none 35.If One Has ACFMT LEVEL |, What is his training and experience requirement to Become RFT LEVEL Il 40,210, 40,630 80,840 20,315 none paecpRefresher Programme for Basic Part A CP — 189 — 2006. Benchmark Questionnaire (State True or False) 1, CP-189 is standard. 2. This provides the maximum training, education and experience requirements. 3. CP-189 gives clear cut requirement of education. 4. In CP-189 the course outlines shall be approved by NDT Instructor. 5. The CP-189 the employer's certification procedure shall be approved by the employer. 6. CP-189 training outlines are in line with SNT-TC-1A 2001 edition, 7. CP-189 defines Outside Agency as individual or Organization. 8. In CP-189 at least one sample is to be given per method for Level I! examination. 9. In CP-189 initial training required for Bubble leak testing is only 2 hours. 10.A person can be straight away qualified to Level 2, if he satisfies the training, 11. Hours criteria for Level 2 only Here absence of training hours in Level | does not matter. 12.in CP-189, the general questions required for Vibration Analysis for Level | (High School Graduate) are 40. 13.In CP-189 the unethical or incompetent behavior will lead to suspension of the certificate. 14. In CP-189 the responsibility of documentations rests with the instructor. 15.CP-189 calls for Level I!! eye test (near vision) after every 3 year. [TF] {TF} (vF] (1F] [UF] [TF] [TF] (/F] (F] (F] (TF) (TF [TF] {TF}16.In CP-189 the training requirements are different for high school graduate and Engineering graduate. 17.Color Vision and contrast among shades of gray is a mandatory test in CP-189. 18.NDT instructor must be an ASNT NDT Level Ill. 19.{f an outside agency is employed for Level III services, the employer of the outside organization is responsible for the service provided. 20. Color vision exam also need to be administered once in every year. 21.Vision exam has to be administered by the person designated by the employer, Level 3 approval is not necessary for these designations. 22. Since NDT Level Ill exam is a closed book exam, even the copies of applicable specification and standards are not allowed even for reference. 23. The NDT Level III cannot perform Level | function 24. Candidates failed in the exam can appear only one month after the announcement of the exam results. 25.NDT Level Ill exam can be administered by ASNT NDT Level iI holder in any method 26. The employer shall suspend an individual certification, if he does not turn up for the job for a period of six month. 27.Reinstatement of Level II certificate holder is determined by the employer and not by the Level Ill 28. Revocation and suspension criteria are basically same. 29.The examination can be administered by the individual being examined. 30. The practical examination can be administered by Level 2 31.A candidate can be examined by the specimen previously failed. [WF] (VF [TF] F} (TF (TF (TF} (/F] [/F] (TF [1/F] (TF [TF] (TF) WF] CF]MODEL QUESTIONS ON CP 189-1995 i A ] 2 D 3 E 4 i 5 B | 6 ies 7 AMR 8 B | 9 E | 10 D 14 E 12 B | ama D [5 Sarid D 15 D 16d, 17a, 18d,19¢,20b,210,22¢,23e,24c25d,26c,27d,28C, 29b, 30c,31¢,32d,33b,34b,35d Part A CP - 189 — 2006 Benchmark Questionnaire (State True or False) 4 Tie 42. E [23 [F 2 E 13 F 24 [Tt 3 aie 14 F ios cae 4 aor 15 F 26 F [5 T 16 F [27 F 6 FE 17, E [28 E 7 E 18 F [29 F 8 iT 19 F 30 F 9 T 20 F 31 EF 10 F 21 E 14 FSSC 22. LF