Scribd
Upload
42 views1 page

Oelzow & Company, Inc.: - + Tolerances For Shaft Alignment

The document provides tolerance levels for shaft alignment at various RPM levels, listing excellent and acceptable levels for gap, offset, and spacer shaft measurements in mils and fractions of an inch. It also notes a maximum soft foot reading of 2.0 mils and recommends using OEM tolerances if available.

Uploaded by

Nicolás Reyes González
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
42 views1 page

Oelzow & Company, Inc.: - + Tolerances For Shaft Alignment

The document provides tolerance levels for shaft alignment at various RPM levels, listing excellent and acceptable levels for gap, offset, and spacer shaft measurements in mils and fractions of an inch. It also notes a maximum soft foot reading of 2.0 mils and recommends using OEM tolerances if available.

Uploaded by

Nicolás Reyes González
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Courtesy Norm & Bev Voelzow

Voelzow & Company, Inc.


4804 Lawyers Rd E Wingate, NC 28174
704-233-9222 Fax 704-233-9211
E-mail: [email protected]
Web: www.LaserAlignment.net

TOLERANCES FOR SHAFT ALIGNMENT ( +


)
8ths
GAP OFFSET SPACER 1/8 = .125
RPM (mils/10") (mils) SHAFT 1/4 = .250
(mils/in.) 3/8 = .375
Excellent Acceptable Excellent Acceptable Excellent Acceptable
1/2 = .500
600 10.0 15.0 5.0 9.0 1.8 3.0 5/8 = .625
900 7.0 10.0 3.0 6.0 1.2 2.0 3/4 = .750
1200 5.0 8.0 2.5 4.0 0.9 1.5 7/8 = .875
1800 3.0 5.0 2.0 3.0 0.6 1.0 Related Products:
SS Shims
3600 2.0 3.0 1.0 1.5 0.3 0.5 Undercut Bolts
7200 1.0 2.0 0.5 1.0 0.15 0.25 Portable Jack
Bolt Kits
All RPM: Maximum Soft Foot Reading 2.0 mils. (1 mil = .001") Heavy Lifting
Note: Use OEM or in-house tolerances if available. Devices
and more ...
Copyright 2003 by LUDECA, INC., Miami, FL

You might also like