Snap Rings

NEW SUPPLEMENT TO SMALLEYS CATALOG

Interchangeable with Eaton Rings

Over 300 Stock Sizes Available

Special Designs Available

No-Tooling-Charges

.200" - 90" / 5 mm - 2300 mm

Eaton Style Snap Rings

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

XAH SERIES
RING RING GROOVE GROOVE
RADIAL WALL THICKNESS DEPTH WIDTH
END CONFIGURATIONS

Material: Steel
SAE 1060 to 1075
TYPE D
HOUSING XAH-37 / XAH-75
RING FREE DIAMETER
Material hardness
OUTSIDE
DIAMETER information on
back cover
GROOVE
DIAMETER

TYPE B
XAH-77 & UP

Smalley Housing RING GROOVE THRUST CAPACITY

Part Number Diameter Outside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
+.020/

XAH-37 .375 .400 .035 .025 .395 .028 265 1,174

-.000

XAH-43 .438 .467 .035 .025 .462 .028 372 1,371

XAH-50 .500 .530 .040 .035 .524 .039 424 2,073
XAH-51 .512 .542 .040 .035 .536 .039 434 2,123
+.025/-.000

XAH-56 .562 .600 .048 .035 .590 .039 556 2,331

XAH-62 .625 .670 .048 .035 .657 .039 707 2,592

.003
XAH-68 .688 .733 .048 .035 .720 .039 778 2,853
XAH-75 .750 .799 .048 .035 .786 .039 954 3,110
XAH-77 .777 .827 .062 .042 .813 .046 989 3,906
XAH-81 .812 .867 .062 .042 .852 .046 1,148 4,082
.003

+.003/-.000
XAH-87 .875 .934 .062 .042 .919 .046 1,361 4,398
XAH-90 .901 .961 .078 .042 .945 .046 1,401 4,529
XAH-93 .938 1.003 .078 .042 .986 .046 1,591 4,715
XAH-100 1.000 1.070 .078 .042 1.052 .046 1,696 5,027
XAH-102 1.023 1.094 .093 .042 1.075 .046 1,880 5,142
+.031/-.000

XAH-106 1.062 1.134 .093 .050 1.114 .056 1,952 6,272

XAH-112 1.125 1.202 .093 .050 1.181 .056 2,227 6,644
XAH-118 1.188 1.270 .093 .050 1.248 .056 2,519 7,017
XAH-125 1.250 1.337 .109 .050 1.314 .056 2,827 7,383
XAH-131 1.312 1.404 .109 .050 1.380 .056 3,153 7,749
XAH-137 1.375 1.472 .109 .050 1.447 .056 3,499 8,121
XAH-143 1.438 1.535 .125 .050 1.510 .056 3,659 8,493
XAH-145 1.456 1.557 .125 .050 1.532 .056 3,911 8,599
.002

XAH-150 1.500 1.607 .125 .050 1.576 .056 4,029 8,859

.005

XAH-156 1.562 1.668 .125 .062 1.642 .068 4,416 11,002

XAH-162 1.625 1.736 .141 .062 1.709 .068 4,824 11,446
XAH-165 1.653 1.765 .141 .062 1.737 .068 4,907 11,643
XAH-168 1.688 1.804 .156 .062 1.776 .068 5,250 11,889
+.004/-.000

XAH-175 1.750 1.870 .156 .062 1.842 .068 5,690 12,326

XAH-181 1.812 1.933 .156 .062 1.904 .068 5,892 12,763
XAH-185 1.850 1.975 .156 .062 1.946 .068 6,277 13,030
XAH-187 1.875 2.000 .156 .062 1.971 .068 6,362 13,206
XAH-193 1.938 2.068 .156 .062 2.038 .068 6,849 13,650
XAH-196 1.968 2.098 .156 .062 2.068 .068 6,955 13,862
.005
+.046/-.000

XAH-200 2.000 2.131 .156 .062 2.100 .068 7,069 14,087

XAH-206 2.062 2.197 .156 .078 2.166 .086 7,579 17,491
XAH-212 2.125 2.260 .156 .078 2.229 .086 7,811 18,025
XAH-218 2.188 2.331 .171 .078 2.296 .086 8,352 18,559
XAH-225 2.250 2.393 .171 .078 2.358 .086 8,588 19,085
XAH-231 2.312 2.459 .171 .078 2.424 .086 9,152 19,611
+.005/-.000

XAH-237 2.375 2.523 .171 .078 2.487 .086 9,401 20,145

.006

XAH-244 2.440 2.592 .187 .078 2.556 .086 10,003 20,697

XAH-250 2.500 2.653 .187 .078 2.616 .086 10,249 21,206
XAH-253 2.531 2.688 .187 .078 2.651 .086 10,734 21,469
XAH-256 2.562 2.726 .187 .093 2.686 .103 11,228 26,078
XAH-262 2.625 2.790 .187 .093 2.750 .103 11,504 26,719
XAH-268 2.688 2.856 .187 .093 2.816 .103 11,780 27,361
XAH-271 2.717 2.882 .187 .093 2.842 .103 12,291 27,656
1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

2 Manufactured in USA

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

 XAH SERIES
RING RING GROOVE GROOVE
RADIAL WALL THICKNESS DEPTH WIDTH
END CONFIGURATIONS

Material: Steel
SAE 1060 to 1075
TYPE D
HOUSING XAH-37 / XAH-75
DIAMETER
RING FREE
OUTSIDE Material hardness
DIAMETER
GROOVE
information on
DIAMETER back cover
TYPE B
XAH-77 & UP

Smalley Housing RING GROOVE THRUST CAPACITY

Part Number Diameter Outside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
XAH-275 2.750 2.918 .187 .093 2.878 .103 12,441 27,992
XAH-281 2.813 2.985 .187 .093 2.945 .103 13,123 28,633
XAH-283 2.834 3.006 .187 .093 2.966 .103 13,221 28,847
XAH-287 2.875 3.056 .187 .093 3.011 .103 13,819 29,264
+.062/-.000

XAH-300 3.000 3.181 .187 .093 3.136 .103 14,420 30,536

XAH-306 3.062 3.247 .218 .109 3.202 .120 15,151 35,009
XAH-312 3.125 3.311 .218 .109 3.265 .120 15,463 35,729
XAH-315 3.156 3.342 .218 .109 3.296 .120 15,616 36,084
XAH-325 3.250 3.442 .218 .109 3.394 .120 16,540 37,158
XAH-334 3.346 3.539 .218 .109 3.490 .120 17,029 38,256
XAH-346 3.469 3.663 .218 .109 3.613 .120 17,655 39,662
XAH-350 3.500 3.700 .250 .109 3.648 .120 18,308 40,017

+.005/-.000
XAH-354 3.543 3.745 .250 .109 3.691 .120 18,533 40,508

.006
+.078/-.000

XAH-356 3.562 3.766 .250 .109 3.710 .120 18,632 40,725

XAH-362 3.625 3.831 .250 .109 3.773 .120 18,961 41,446
XAH-375 3.750 3.962 .250 .109 3.902 .120 20,145 42,875
XAH-387 3.875 4.089 .250 .109 4.027 .120 20,817 44,304
XAH-393 3.938 4.156 .250 .109 4.094 .120 21,712 45,024
XAH-400 4.000 4.221 .250 .109 4.156 .120 22,054 45,733
XAH-412 4.125 4.355 .250 .109 4.285 .120 23,326 47,162
XAH-425 4.250 4.485 .250 .109 4.410 .120 24,033 48,592
+.093/-.000

XAH-433 4.330 4.565 .250 .109 4.490 .120 24,486 49,506

XAH-443 4.436 4.670 .250 .109 4.596 .120 25,085 50,718
.005

.002

XAH-450 4.500 4.744 .250 .109 4.664 .120 26,083 51,450

XAH-462 4.625 4.875 .250 .109 4.795 .120 27,788 52,879
XAH-475 4.750 5.011 .281 .109 4.926 .120 29,547 54,308
XAH-500 5.000 5.265 .281 .109 5.180 .120 31,809 57,167
XAH-525 5.250 5.530 .312 .125 5.435 .139 34,141 65,732
+.125/-.000

XAH-537 5.375 5.660 .312 .125 5.565 .139 36,094 67,297

.007

XAH-550 5.500 5.796 .312 .125 5.696 .139 38,100 68,862

XAH-575 5.750 6.050 .312 .125 5.950 .139 40,644 71,992
XAH-600 6.000 6.309 .312 .125 6.204 .139 43,260 75,122
XAH-625 6.250 6.568 .343 .156 6.458 .174 45,946 94,130
XAH-650 6.500 6.832 .343 .156 6.712 .174 48,703 97,895
+.156/
-.000

XAH-662 6.625 6.975 .343 .156 6.845 .174 51,512 99,778

XAH-675 6.750 7.100 .343 .156 6.970 .174 52,484 101,660
+.006/-.000

XAH-700 7.000 7.350 .343 .156 7.220 .174 54,428 105,426

XAH-725 7.250 7.630 .375 .187 7.500 .209 64,059 123,654
XAH-750 7.500 7.890 .375 .187 7.750 .209 66,268 127,918
.008

XAH-800 8.000 8.400 .375 .187 8.250 .209 70,686 136,446

XAH-825 8.250 8.665 .437 .187 8.540 .209 84,558 141,478
+.187/-.000

XAH-850 8.500 8.915 .437 .187 8.790 .209 87,120 145,766

XAH-875 8.750 9.205 .500 .187 9.080 .209 102,053 150,053
XAH-900 9.000 9.455 .500 .187 9.330 .209 104,968 154,340
XAH-905 9.055 9.509 .500 .187 9.384 .209 105,610 155,283
XAH-950 9.500 9.955 .500 .187 9.830 .209 110,800 162,915
XAH-984 9.840 10.295 .500 .187 10.170 .209 114,766 168,745
XAH-1000 10.000 10.455 .500 .187 10.330 .209 116,632 171,489
1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

XAS SERIES
RING RING GROOVE GROOVE END CONFIGURATIONS
RADIAL WALL THICKNESS DEPTH WIDTH

Material: Steel
TYPE D SAE 1060 to 1075
SHAFT XAS-31 / XAS-43
DIAMETER
RING FREE
INSIDE Material hardness
DIAMETER GROOVE information on
back cover
DIAMETER

TYPE C
XAS-46 & UP

Smalley Shaft RING GROOVE THRUST CAPACITY

Part Number Diameter Inside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
XAS-31 .312 .281 .040 .025 .290 .028 243 977
+.000/

XAS-34 .344 .312 .040 .025 .322 .028 267 1,077

-.015

XAS-35 .354 .320 .040 .025 .330 .028 300 1,108

XAS-37 .375 .341 .040 .025 .351 .028 318 1,174
XAS-39 .393 .359 .040 .025 .369 .028 333 1,231
+.000/

XAS-40 .406 .372 .040 .025 .382 .028 344 1,271

-.020

XAS-43 .438 .402 .040 .025 .412 .028 402 1,371

XAS-46 .469 .433 .040 .025 .443 .028 431 1,468

.002
XAS-50 .500 .464 .048 .035 .474 .039 459 2,073
XAS-55 .551 .514 .048 .035 .524 .039 526 2,285

+.003/-.000
XAS-56 .562 .524 .048 .035 .534 .039 556 2,331
+.000/-.025

XAS-59 .594 .555 .048 .035 .566 .039 588 2,463

XAS-62 .625 .586 .062 .035 .597 .039 619 2,592
XAS-66 .669 .630 .062 .035 .640 .039 686 2,774
XAS-68 .688 .644 .062 .042 .656 .046 778 3,458
.003

XAS-75 .750 .703 .062 .042 .716 .046 901 3,770

XAS-78 .781 .733 .062 .042 .745 .046 994 3,926
XAS-81 .812 .764 .062 .042 .776 .046 1,033 4,082
XAS-87 .875 .820 .078 .042 .835 .046 1,237 4,398
XAS-93 .938 .881 .078 .042 .896 .046 1,392 4,715
XAS-98 .984 .925 .078 .042 .940 .046 1,530 4,946
.003

XAS-100 1.000 .941 .093 .042 .956 .046 1,555 5,027

XAS-102 1.023 .962 .093 .042 .977 .046 1,663 5,142
+.000/-.031

.002

XAS-106 1.062 1.000 .093 .050 1.016 .056 1,727 6,272

XAS-112 1.125 1.060 .093 .050 1.075 .056 1,988 6,644
XAS-118 1.188 1.121 .093 .050 1.136 .056 2,183 7,017
XAS-125 1.250 1.179 .093 .050 1.194 .056 2,474 7,383
XAS-131 1.312 1.232 .093 .050 1.250 .056 2,875 7,749
XAS-137 1.375 1.291 .109 .050 1.309 .056 3,207 8,121
XAS-143 1.438 1.351 .109 .050 1.370 .056 3,456 8,493
+.004/-.000

XAS-150 1.500 1.408 .109 .050 1.430 .056 3,711 8,859

.004

XAS-156 1.562 1.467 .125 .062 1.490 .068 3,975 11,002

XAS-162 1.625 1.527 .125 .062 1.551 .068 4,250 11,446
XAS-168 1.687 1.581 .125 .062 1.611 .068 4,531 11,882
XAS-175 1.750 1.640 .125 .062 1.670 .068 4,948 12,326
XAS-177 1.771 1.657 .141 .062 1.687 .068 5,258 12,474
XAS-181 1.812 1.698 .141 .062 1.728 .068 5,379 12,763
XAS-187 1.875 1.759 .156 .062 1.789 .068 5,699 13,206
+.000/-.046

XAS-196 1.969 1.849 .156 .062 1.879 .068 6,263 13,869

.005

XAS-200 2.000 1.880 .156 .062 1.910 .068 6,362 14,087

XAS-206 2.062 1.936 .156 .078 1.966 .086 6,996 17,491
XAS-212 2.125 1.997 .156 .078 2.027 .086 7,360 18,025
.006

+.005/-.000

XAS-215 2.156 2.026 .156 .078 2.056 .086 7,620 18,288

XAS-225 2.250 2.116 .156 .078 2.146 .086 8,270 19,085
XAS-231 2.312 2.174 .187 .078 2.204 .086 8,825 19,611
XAS-237 2.375 2.235 .187 .078 2.265 .086 9,233 20,145
XAS-243 2.437 2.295 .187 .078 2.325 .086 9,647 20,671
XAS-250 2.500 2.356 .187 .078 2.386 .086 10,073 21,206
1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

4 Manufactured in USA

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

 XAS SERIES
RING RING GROOVE GROOVE END CONFIGURATIONS
RADIAL WALL THICKNESS DEPTH WIDTH

Material: Steel
TYPE D SAE 1060 to 1075
SHAFT XAS-31 / XAS-43
DIAMETER
RING FREE
INSIDE Material hardness
DIAMETER GROOVE
DIAMETER
information on
back cover
TYPE C
XAS-46 & UP

Smalley Shaft RING GROOVE THRUST CAPACITY

Part Number Diameter Inside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
XAS-255 2.559 2.413 .187 .078 2.443 .086 10,491 21,706
+.000/
-.046

XAS-262 2.625 2.475 .187 .078 2.505 .086 11,133 22,266

XAS-268 2.687 2.535 .187 .078 2.565 .086 11,586 22,792
XAS-275 2.750 2.594 .187 .093 2.624 .103 12,246 27,992
XAS-287 2.875 2.713 .187 .093 2.743 .103 13,413 29,264
XAS-293 2.937 2.771 .187 .093 2.801 .103 14,117 29,895
+.000/-.062

XAS-300 3.000 2.830 .218 .093 2.860 .103 14,844 30,536

XAS-306 3.062 2.890 .218 .093 2.920 .103 15,367 31,167
XAS-312 3.125 2.951 .218 .093 2.981 .103 15,904 31,809
XAS-315 3.156 2.980 .218 .093 3.010 .103 16,285 32,124
XAS-325 3.250 3.070 .250 .093 3.100 .103 17,230 33,081

+.005/-.000
XAS-334 3.344 3.160 .250 .093 3.190 .103 18,201 34,038
XAS-343 3.437 3.251 .250 .093 3.281 .103 18,950 34,984
XAS-350 3.500 3.305 .250 .109 3.340 .120 19,792 40,017
XAS-354 3.543 3.346 .250 .109 3.381 .120 20,286 40,508

.006
+.000/-.078

XAS-362 3.625 3.423 .250 .109 3.458 .120 21,396 41,446

XAS-368 3.687 3.482 .250 .109 3.517 .120 22,153 42,155
XAS-375 3.750 3.541 .250 .109 3.576 .120 23,061 42,875
XAS-387 3.875 3.657 .281 .109 3.697 .120 24,378 44,304
XAS-393 3.938 3.713 .281 .109 3.758 .120 25,052 45,024
XAS-400 4.000 3.771 .281 .109 3.816 .120 26,012 45,733
.005

.002
+.000/-.093

XAS-425 4.250 4.016 .281 .109 4.066 .120 27,638 48,592

XAS-437 4.375 4.141 .281 .109 4.191 .120 28,451 50,021
XAS-450 4.500 4.255 .312 .109 4.310 .120 30,218 51,450
XAS-475 4.750 4.495 .312 .109 4.550 .120 33,576 54,308
XAS-500 5.000 4.730 .312 .109 4.790 .120 37,110 57,167
XAS-525 5.250 4.970 .375 .125 5.030 .139 40,821 65,732
+.006/-.000

XAS-550 5.500 5.206 .375 .125 5.266 .139 45,486 68,862

XAS-575 5.750 5.446 .375 .125 5.506 .139 49,586 71,992
+.000/-.125

XAS-590 5.900 5.600 .375 .125 5.656 .139 50,880 73,870

XAS-600 6.000 5.687 .375 .125 5.746 .139 53,863 75,122
XAS-625 6.250 5.916 .437 .156 5.986 .174 58,316 94,130
XAS-650 6.500 6.151 .437 .156 6.226 .174 62,946 97,895
XAS-675 6.750 6.386 .437 .156 6.466 .174 67,752 101,660
XAS-700 7.000 6.621 .437 .156 6.706 .174 72,736 105,426
+.008/-.000

XAS-725 7.250 6.840 .500 .187 6.930 .209 81,996 124,330

.008

XAS-750 7.500 7.090 .500 .187 7.180 .209 84,823 128,617

+.000/-.156

XAS-800 8.000 7.560 .500 .187 7.660 .209 96,133 137,191

XAS-850 8.500 8.050 .500 .187 8.160 .209 102,141 145,766
XAS-900 9.000 8.545 .500 .187 8.660 .209 108,149 154,340
XAS-925 9.250 8.800 .500 .187 8.910 .209 111,153 158,627
XAS-950 9.500 9.040 .500 .187 9.160 .209 114,158 162,915
XAS-1000 10.000 9.535 .500 .187 9.660 .209 120,166 171,489
1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

XDH SERIES
RING RING GROOVE GROOVE
RADIAL WALL THICKNESS DEPTH WIDTH
END CONFIGURATIONS

Material: Steel
SAE 1060 to 1075
TYPE B
HOUSING
RING FREE DIAMETER
Material hardness
OUTSIDE
DIAMETER information on
back cover
GROOVE
DIAMETER

Smalley Housing RING GROOVE THRUST CAPACITY

Part Number Diameter Outside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
XDH-112 1.125 1.196 .093 .042 1.181 .046 2,227 5,655

.003
+.031/

XDH-125 1.250 1.330 .093 .042 1.310 .046 2,651 6,283

-.000

XDH-137 1.375 1.460 .093 .042 1.435 .046 2,916 6,912

.005
XDH-150 1.500 1.600 .125 .042 1.580 .046 4,241 7,540
XDH-162 1.625 1.725 .125 .042 1.705 .046 4,595 8,168

+.003/-.000
XDH-175 1.750 1.855 .125 .042 1.830 .046 4,948 8,796
XDH-187 1.875 1.990 .156 .042 1.965 .046 5,964 9,425
+.062/-.000

XDH-200 2.000 2.115 .156 .042 2.090 .046 6,362 10,053

XDH-206 2.062 2.177 .156 .042 2.152 .046 6,559 10,365
XDH-218 2.187 2.302 .156 .042 2.277 .046 6,957 10,993
XDH-231 2.312 2.432 .156 .042 2.402 .046 7,354 11,621
XDH-243 2.437 2.557 .156 .042 2.527 .046 7,752 12,250
XDH-256 2.562 2.682 .156 .042 2.652 .046 8,149 12,878
XDH-300 3.000 3.154 .187 .062 3.124 .068 13,148 21,130
+.078/-.000

+.004/-.000
.006
.002

XDH-325 3.250 3.404 .187 .062 3.374 .068 14,243 22,891

XDH-350 3.500 3.654 .187 .062 3.624 .068 15,339 24,652
.005

XDH-375 3.750 3.904 .187 .062 3.874 .068 16,434 26,413

XDH-400 4.000 4.155 .187 .062 4.125 .068 17,671 28,174
XDH-425 4.250 4.429 .218 .078 4.394 .086 21,630 36,050
+.093/-.000

XDH-450 4.500 4.679 .218 .078 4.644 .086 22,902 38,170

XDH-475 4.750 4.929 .218 .078 4.894 .086 24,175 40,291
XDH-500 5.000 5.184 .218 .078 5.144 .086 25,447 42,412
+.005/-.000
XDH-525 5.250 5.434 .218 .078 5.394 .086 26,719 44,532
.007

XDH-575 5.750 5.934 .218 .078 5.894 .086 29,264 48,773

XDH-600 6.000 6.220 .250 .093 6.160 .103 33,929 61,073
+.125/
-.000

XDH-650 6.500 6.730 .250 .093 6.660 .103 36,757 66,162

XDH-700 7.000 7.240 .250 .093 7.160 .103 39,584 71,251
.008

XDH-725 7.250 7.500 .250 .093 7.410 .103 40,998 73,796

+.187/
-.000

XDH-750 7.500 7.760 .250 .093 7.660 .103 42,412 76,341

XDH-800 8.000 8.285 .250 .093 8.160 .103 45,239 81,430
1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

6 Manufactured in USA

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

 XDS SERIES
RING RING GROOVE GROOVE END CONFIGURATIONS
RADIAL WALL THICKNESS DEPTH WIDTH

Material: Steel
TYPE D SAE 1060 to 1075
SHAFT XDS-50 / XDS-62
DIAMETER
RING FREE
INSIDE Material hardness
DIAMETER GROOVE
DIAMETER
information on
back cover
TYPE C
XDS-75 & UP

Smalley Shaft RING GROOVE THRUST CAPACITY

Part Number Diameter Inside Diameter Radial Wall Thickness Diameter Width Groove Yield (lb)1 Ring Shear (lb)2
XDS-50 .500 .465 .048 .035 .474 .039 459 2,073

.002
+.000/
-.025

XDS-62 .625 .587 .062 .035 .597 .039 619 2,592

.003
XDS-75 .750 .704 .078 .042 .716 .046 901 3,770
XDS-87 .875 .823 .093 .042 .833 .046 1,299 4,398

.003
XDS-100 1.000 .944 .093 .042 .954 .046 1,626 5,027
XDS-112 1.125 1.065 .125 .042 1.077 .046 1,909 5,655
+.000/-.031

XDS-118 1.187 1.120 .125 .042 1.135 .046 2,182 5,967

XDS-125 1.250 1.179 .125 .042 1.194 .046 2,474 6,283
XDS-131 1.312 1.232 .125 .042 1.252 .046 2,782 6,595

+.003/-.000
XDS-137 1.375 1.289 .125 .042 1.309 .046 3,207 6,912

.004
XDS-143 1.437 1.349 .125 .042 1.369 .046 3,454 7,223
XDS-150 1.500 1.410 .125 .042 1.430 .046 3,711 7,540
XDS-162 1.625 1.520 .156 .042 1.545 .046 4,595 8,168
XDS-168 1.687 1.582 .156 .042 1.607 .046 4,770 8,480
XDS-175 1.750 1.645 .156 .042 1.670 .046 4,948 8,796
+.000/-.062

XDS-193 1.937 1.832 .156 .042 1.857 .046 5,477 9,736

XDS-200 2.000 1.895 .156 .042 1.920 .046 5,655 10,053
XDS-218 2.187 2.082 .156 .042 2.107 .046 6,184 10,993
XDS-225 2.250 2.145 .156 .042 2.170 .046 6,362 11,310
.002

XDS-237 2.375 2.270 .156 .042 2.295 .046 6,715 11,938

XDS-250 2.500 2.390 .156 .042 2.420 .046 7,069 12,566
XDS-275 2.750 2.596 .187 .062 2.626 .068 12,052 19,369
.005

XDS-293 2.937 2.783 .187 .062 2.813 .068 +.004/-.000 12,871 20,687
+.000/-.078

XDS-300 3.000 2.846 .187 .062 2.876 .068 13,148 21,130

.006

XDS-312 3.125 2.965 .187 .062 3.000 .068 13,806 22,011

XDS-325 3.250 3.090 .187 .062 3.125 .068 14,358 22,891
XDS-337 3.375 3.215 .187 .062 3.250 .068 14,910 23,772
XDS-350 3.500 3.340 .187 .062 3.375 .068 15,463 24,652
XDS-375 3.750 3.570 .218 .078 3.610 .086 18,555 31,809
+.000/-.093

XDS-400 4.000 3.820 .218 .078 3.860 .086 19,792 33,929

XDS-425 4.250 4.070 .218 .078 4.110 .086 21,029 36,050
XDS-450 4.500 4.320 .218 .078 4.360 .086 22,266 38,170
+.005/-.000

XDS-475 4.750 4.560 .218 .078 4.610 .086 23,503 40,291

XDS-500 5.000 4.800 .218 .078 4.860 .086 24,740 42,412
XDS-550 5.500 5.280 .250 .093 5.340 .103 31,102 55,983
+.000/

XDS-600 6.000 5.775 .250 .093 5.840 .103 33,929 61,073

-.125

XDS-650 6.500 6.270 .250 .093 6.340 .103 36,757 66,162

.008

XDS-700 7.000 6.765 .250 .093 6.840 .103 39,584 71,251

+.000/

XDS-750 7.500 7.245 .281 .109 7.320 .120 47,713 85,750

-.156

XDS-800 8.000 7.740 .281 .109 7.820 .120 50,894 91,466

1
Based on a groove material yield strength of 45,000 psi and a safety factor of 2.
2
Based on a safety factor of 3.

View Smalleys complete product catalog at:

www.smalley.com/getcatalog

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999

INTERCHANGE LISTING
Smalley Retaining Rings are interchangeable with both inch and metric retaining ring and snap ring grooves. Smalley
offers FREE SAMPLES of all stock rings to test in your application.

Cross-reference a standard stamped ring (circlip) or snap ring to find the appropriate Smalley Retaining Ring or Snap
Ring to fit in your application.

METRIC EUROPEAN INDUSTRIAL

MILITARY AEROSPACE AEROSPACE SPECIFICATION WALDES RETAINING OTHER
SMALLEY SPIROLOX MIL-DTL-27426 AS 3219 MA 4035 DIN TRUARC EATON RING RINGS ANDERTON
VH UR --- --- ---
VS US --- --- --- GROOVE INTERCHANGE ONLY
AS 4299
WH RR /3 --- Use a Smalley Retaining Ring to fit into the same
AS 3217
groove as these stamped retaining rings (circlips).
AS 4299
WS RS /1 ---
AS 3218
WHT RRT --- --- --- --- --- NAN --- UHB ---
WST RST --- --- --- --- --- XAN --- USC ---
HO
AS 4299 N5000 3000
WHM RRN /4 --- --- --- IN HOI N1300
AS 3215 5008 4000
UHO
SH
AS 4299 5100 3100
WSM RSN /2 --- --- --- EN SHI N1400
AS 3216 5108 4100
USH
DNH --- --- --- --- DIN 472 --- --- --- DHO D1300
DNS --- --- --- --- DIN 471 --- --- --- DSH D1400
EH --- --- --- MA 4017 --- --- --- --- --- ---
ES --- --- --- MA 4016 --- --- --- --- --- ---
FH --- --- --- --- DIN 472 --- --- --- DHO D1300
FS --- --- --- --- DIN 471 --- --- --- DSH D1400
XAH --- --- --- --- --- --- NAN --- UHB ---
XAS --- --- --- --- --- --- XAN --- USC ---
XDH --- --- --- --- --- --- ND --- HN ---
XDS --- --- --- --- --- --- XD --- SNL ---
XNH --- --- --- --- --- --- IN --- UHO ---
XNS --- --- --- --- --- --- EN --- USH ---

END CONFIGURATIONS
Smalley offers 4 series of Eaton style snap rings from stock. Additional end types can be manufactured to meet your
snap ring requirements. Inquire about the following end types:

MATERIAL HARDNESS SMALLEY PRODUCTS

THICKNESS HARDNESS (Rc) To request information or a copy of Smalleys complete
(INCH) MIN Engineering & Parts Catalog, visit us at: www.smalley.com.
Up to .022 46.0 Smalley is the leading manufacturer of:
Over .022 to .050 44.0

Over .050 to .078 42.0 Spirolox Retaining Rings
Over .078 40.0 Snap Rings
Wave Springs
Eaton is a registered trademark of the Eaton Corporation.
SRC-2008-A

www.smalley.com [email protected] phone 847.719.5900 fax 847.719.5999