Scribd
Upload
47 views

Design of One-Way Slab: FCK 20mpa Fy 415mpa

The document provides details for designing a one-way slab, including the slab dimensions, wall thickness, assumed depth, rebar diameter and spacing, effective depth, loading conditions, and calculations for ultimate moment and steel reinforcement area and spacing. The slab has a length of 3.5m, width of 8m, wall thickness of 0.25m, and uses 10mm diameter rebar with a spacing of 153mm to resist an ultimate load of 13.2kN over an effective span of 3.63m.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
47 views

Design of One-Way Slab: FCK 20mpa Fy 415mpa

The document provides details for designing a one-way slab, including the slab dimensions, wall thickness, assumed depth, rebar diameter and spacing, effective depth, loading conditions, and calculations for ultimate moment and steel reinforcement area and spacing. The slab has a length of 3.5m, width of 8m, wall thickness of 0.25m, and uses 10mm diameter rebar with a spacing of 153mm to resist an ultimate load of 13.2kN over an effective span of 3.63m.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

DESIGN OF ONE-WAY SLAB

Fck= 20mpa Fy=415mpa


Wall Assumed Dia of Effective
Sno. Lx (m) Ly (m) thickness depth 'D' Type of Slab
bars span (m)
(m) (mm)

1 3.5 8 0.25 150 10 3.63 Continuous


ONE-WAY SLAB
Loading
Ultimate
Check for Effective Ultimate
l/d D.L L.L moment Ast Spacing 'mm'
depth depth 'mm' load 'Wu' 'Mu'

32 O.K 3.75 5 130 13.2 22 511 153


Dist. Steel spacing 'mm'

180 279

You might also like