areas ASM Material Data Sheet
— —
TSM |
A
ASM Aerospace Specification ae
Contact Us
asmmatweb convsearchiSpuciicMatorial aspbassnum=MABOS3TEsaan
Poisson's Ratio
Fatigue Strength
Machinabilty
‘Shear Modulus
‘Shear Strength
Electrical Properties
Electrical Resistivity
Thermal Properties
CTE, linear 68°F
CTE, linear 250°C
Specific Heat Capacity
Thermal Conductivity
Meting Point
Solidus
Liquidus
Processing Properties
‘Annealing Temperature
Solution Temperature
‘Aging Temperature
0.33
68.9 MPa
50%
25.8GPa
162 MPa
3.326-008 ohm-cm
23.4 umim-°C
25.6 umim-°C
0.9 Wia"c.
200 Wim-«
616 - 654°C
616°C
654°C
413°C
521°C
a7r°c
References for this datasheet.
[ASM Material Data Shect
0.33
10000 psi
50%
3740 ksi
22000 psi
3.326-008 ohm-em
13 unin“
14.2 pinlin?F
0.215 BTU“
1390 BTUsnhe“F
1140-1210 °F
1140 °F
1210°F
775°F
970°F
350 °F
‘AA; 500,000,000 cycles completely reversed stress; RR
Moore machine/specimen
(0-100 Scale of Aluminum Alloys
AA; Typical
AA; Typical at 68°F
AA; Typical; Average over 68-212°F range.
‘Average over the range 20-300°C
AA; Typical at 77°F
‘AA; Typical range based on typical composition for wrought
products 1/4 inch thickness or greater
AA; Typical
‘AA; Typical
hold at temperature for 2 to 3 hr, cool at 50°F per hour from
775 to 500°F
hold at temperature for 8 hr
Some of the values displayed above may have been converted fom their original units ans rounded in orderto display the information in a consistant
converdonsto equ
‘leo aactnat you
nt unite Wie advise tat you only use the onginal value or one of te raw converonsin youreleulatene a minimize ounding eon. W
to Mattis'e dilaimar and tems use regarding tnisnforation, MatiVeo data and tools provided by Mato, LLC.
asm matwab.com/search'SpecteMaterial. asp %bassnum=MABO6ITE