1)

Which advantage does a spinning media drive have over an SSD drive?

A. No long term data loss in unpowered drives

B. Lower cooling needs
C. Higher sequential write rates
D. Quicker start up time

Explaination : Expalination

Answer : A

2)

Which HP Stratergy support a storage customer during migrations to prevent downtime?

A. Federated storage
B. Storage tiering
C. Reduplication
D. LUN Binding

Answer : A

3)

You have been asked to design a solution that allows a customer to migrate from HP 3PAR F400 that is
at capacity and nearly three years old. The customer is avaluating the new HP 3PAR Storeserv7400. One
of the major considerations is online data migrations.

Which HP 3PAR Storeserv functionality should you recommend this migration?

A. Online Export
B. Peer Persistence
C. Remote Copy
D. Peer Motion

Answer : D

4)

A CIO is interested in moving their infrastructure to a private cloud solution in the future. The consultant
advises implementing an HP Virtual System

Which stage of migration is the HP Virtual System positioned.

A. Virtualize and automate

B. Self-service virtualization infrastructure
C. Self-service applications with lifecycle management
D. Standardize and consolidate
Answer : A

5)

What are HP iLO Management Engine features (Select Two)

A. Intelligent Provisioning
B. Utilization Manager
C. BIOS Vaccine
D. Agentless Management
E. Lights-Out Recovery

Answer: A,D

6)

When designing a solution, what is the best use-case for Solid State Disk Drives?

A. To facilitate big sequential writes

B. In non-mission-critical environments
C. For backup to disk solutions
D. For mission-critical server applications, database, and online storage

Answer: D

7)

A customer requires a solution providing a Network Attached Storage (NAS) environment. The
environment must allow clients to continue to work uninterrupted during a failure of any of the NAS file
server cluster nodes

Which feature of an HP StoreEasy solution supports automatic multiple network pathing and aggregates
bandwidth?

A. Hosted Branch Cache

B. Single instance Storage
C. File Server Resource Manager (FSRM)
D. Server message Block (SMB) v3

Answer: D

8)

A customer has a head office with a number of branch offices that have no local servers. The customer
requires a file serving solution that provides these benefits:

Which solution should you propose to meet the customer requirements?

A. HP StoreAll 9000 Storage

B. HP StoreEasy 1000 Storage
C. HP StoreSure 2000 Storage
D. HP StoreEasy 5000 Storage
Answer: B

9)

You have recommended a new storage solution to your customer and have already created your design
with the HP Storage Sizer. The next step is to provide them a budgetary quote?

What is the best way to create the quote?

A. Sent your design to HP and ask them to help.

B. Cut and paste the date into an Excel Spresdsheet
C. Push the Quote button in the HP Storage Sizer
D. Export the data to SBW and use the Quote tool

Answer: D

10)

When designing an HP Virtual Connect lexFabric network, how many downlink connections can be
configured per module pair to an HP Proliant BL 460c Gen 8 with an HP FlexFabric 2 Port FlexLOM?

A. 2
B. 4
C. 8
D. 16

Answer: C

11)

A leading retail, corporate, and investment bank serves approximately 15 million customer within
central and Eastern Europe. They have older P4000 storage systems and want to implements the latest
HP Store Virtual 4000 model. Some of their volumes that support critical applications must be moved
over to the new platform

Which HP Technology enables this action without stopping the applications?

A. HP Peer Federaion
B. HP pMotion
C. HP Remote Motion
D. HP Peer Motion

12)

Which HP hosted portal can be used to collect and share customer hardware details, warranties, and
support contracts?

A. HP System Management homepage

B. HP Smart Update Portal
C. HP insight Online
D. HP Insight Control
Answer: C

13)

Which device facilitates the migration of data between heterogeneous storage systems?

A. HP SN6000
B. HP 2408
C. HP MPX200
D. HP SN8000C

Answer : C

14)

Which drive interconnect technology uses SCSI commands and a serial bus?

A. SAS
B. iSCSI
C. SDI
D. SATA

Answer: A

15)

Which features would lead you to position an HP 3PAR Storeserv 7200 as a replacement for an existing
HP 8100 Enterprise Virtual Array? (Select Two).

A. Similar feature set

B. Compatible replication protocol
C. Faster Disk Spindle speeds
D. Thin provisioning
E. Seamless data migration

Answer D,E

16)

As a storage persales consultant, you are asked to explain the unique features and technologies of HP
Product Portfolio to your customer.

Match the feature to the corresponding HP Storage Product.

Answer:

HP StoreVirtual VSA Software = Network RAID, Thin Provisioning Snapshots, 2CPUs

HP MSA P2000 G3 Modual Smart Array System = Autonoic Node Failover

HP StoreVirtual Multi-Site Cluster = Failover Manager

HP StoreOnce 6000 Backup System = Integrated Deduplication

HP SoteEasy Storage System = Battery-free cache backup with super capacitors and compact flash.

17)

Match the RAID characterists to the RAID type.

Answer:

Highest Write performance RAID 0

N-1 Useable drives RAID 5

Mirrors data on Multiple Drives RAID 1+0

18)

Which resource can be used to identify the configuration of the primary backup system?

A. HP Tape Assure
B. HP D2D Storage Sizer
C. HP Library and Tape Tools
D. HP D2D Support ticker

Answer: C

19)

Which HP Tool can be used to analyze all performance counters of the existing array?
 A. HP Performance Monitor
B. HP EVAPerf
C. Windows Permon
D. HP 3PAR System Reporter.

Answer: D

20)

A customer requires a Digital Asses Management system with 140 TB of high capacity, low performance
disk storage. Their data center is in a hosted environment. Due to their data center per-rack-unit
charging model, they have invested heavily in blade architecture which Virtual Connect Flex-10
connectivity. The Service Level Agreement mandates the data need to be highly available allowing for
node failures.

A. HP StoreVirtual 4000 Storage

B. HP StoreServ 7200
C. HP StoreSure 2000 Storage
D. HP P4800 G2 LeftHand SAN

Answer: D

21)

Which RAID level protects against two concurrent data drive failures?

A. RAID 2
B. RAID 3
C. RAID 5
D. RAID 6

Answer D

22)

Which technology has the ability to share data across an Ethernet network and is used primarily for file
sharing and unstructured data?

A. Fibre Channel Network

B. Storage Area Network
C. Direct Attached Storage
D. Network Attached Storage.

Answer: D

23)

Your customer require approximately 400 TB of file serving storage. TO satisfy this requirement they are
looking for a high-available NAS applicane. Which HP Storage solution meets this requirements?

A. HP StoreAll 9400
 B. HP StoreEasy 5530
C. HP StoreEasy 1830
D. HP StoreVirtual 4900

Answer: A

24)

Which state about RPO is true?

A. RPO is the point in time relative to the failure to which you need preservation of data.
B. RPO is the maximum tolerable length that a storage system can be down after a disaster occurs
C. RPO is the duration of time and a service level within which a business process must be restores
after a disaster
D. RPO attaches to the business process and not to the resources required to support the Real 39

Answer: A

25)

You are a presales consultant for a medium sized pharmaceutical company. The environment consists of
an HP BladeSyatem c3000 enclosure with a vSphere 5.1 infrastructure cluster and iSCSI as the main
topology

The new SL requirements state that the infrastructure must be fully redundant. The customer advises
you that firmware updates should be implemented online without experiencing any downtime.

When designing the environment, which components should you recommend to meet the customer
requirements? (Slect Two)

A. Additional Host Bus Adapter Mezzanine cards

B. HP Insight Control and SUM liscenses
C. Redundant Onboard Administrator Modules
D. HP Virtual connect Enterprise Manager
E. Redundant Virtual Connect Flex-10 Modules.

Answer D,E

26)

Which HP Storage solution provided automatically-optimized tiered storage and thin provisioning?

A. HP MAS P2000
B. HP EVA P6000
C. HP StoreVirtual
D. HP 3PAR StoreServ

Answer: D

27)
An alternative energy company was founded 2003 by a joint venture of two regional energy companies
in the US. They focused on engineering solutions for the solar energy sector. Since 2010, they have
offered operational services, including billing and financial services, for solar power plants, The
acquisition of companies related to this sector is a future strategy to raise their market share. Moreover,
in 2012 the company established a branch office in Europe to take part in the extensive European
Market growth.

A new storage solution is being designed for the companys central organization. Which QUESTIONS
SHOULD THE it MANAGER BE ASKED TO VERIFY THAT THE PROPOSED SOLUTION WILL COVER THE
BUSINESS NEEDS WHEN ACQUIRING NEW COMPANIES (Select Two)

A. Which requirements must be met today, in three months and in six months?
B. How do you expect business to grow in the near future?
C. How does the user define performance?
D. Which criteria must be met for fault tolerance and recovery time?
E. Is the intended use of the solution processor intensive?

Answer: A, C

28)

A leading retail, corporate and investment bank serves approximately one million customer within
central and Eastern Europe. The bank plans to modernize their data protection infrastructure to fulfill
their strong data security expectations.

Which components should you suggest to provide encryption of their backed-up data? (Select Two).

A. HP LTO-4 SB1760c Tape Blade

B. HP LTO-3 Ultrium 800 G WORM Drive
C. HP Enterprise secure keymanager
D. HP Ultrium 960 Tape Drives
E. HP Ultrium 448 Tape Drives

Answer A,C

29)

Which HP Server solution is optimized for data center virtualization to archive the highest density,
maximum power efficiency by sharing power supplies and fans maintain total flexibility through a Single
Point of Management and support most of the HP Interconnect Technologies?

A. ML
B. BL
C. DL
D. SL

Answer: B

30)
A medium sized ware house company has built their Windows based IT Environment over time. They
have recently virtualized their servers using VMWare technologies. They want to build virtualized
storage solution but without a new storage network. Your solution is based on the HP StoreEasy
product.

Which common features meet the customer requirements (Select Two).

A. StoreEasy Management
B. 16 Petabyte namespace
C. SAN gateway facility
D. Node-based flexibility
E. NFS 4.1 protocol support

Answer A, C

31)

A leading retail, corporate and investment back servers approximately 15 million customers in central
and eastern Europe. The back plans to build two redundant data centers in Europe. Their backup
stratergy is to implement an HP StoreOnce solution in Europe servicing 24 TB across the three remote
offices. They have a native 10GB Ethernet infrastructure and plan to implement HP StoreOnce Catalyst.
As their backup Presales consultant you must prepare an evaluation to present the HP StoreOnce
Solution

Which HP StoreOnce solution should you propose for the remote offices?

A. One HP Storeonce 4224 Backup for each remote office, as well as Reolication and HP Storeonce
Catalyst licenses.
B. One HP Storeonce 4220 Backup for wach of the three remote offices, as well as HP StoreOnce
Catalyst Licenses.
C. One HP StoreOnce 4210 Fibre Channel Backup for each remote office, as well as Replication and
HP StoreOnce Catalyst Licenses.
D. One HP StoreOnce 4220 Backup for each remote office, as well as HP StoreOnce Catalyst
licenses for source and target.

Answer: B

32)

Which statements are true when zoning an HP MSA P2000 G3 FC array into a fabric? (Select Two)

A. The array can be in multiple operating system zones

B. Overlapping storage port zones may be configured.
C. Zoning is required for all operating systems that access the array
D. Zoning is not required for a single operating system
E. The array requires port-based zoning to be configured.

Answer A,C

32)
Your customer is a medium-sized insurance company. They have decided to build a redundant vSphere
5.1 infrastructure cluster with HP Blade System. As their consultant, you propose redundant HP Blade
System C7000 enclsoures, Flex Fabric Interconnect modules, and four HP Proliant BL660C Gen8 Servers,
with two dual port Flex-Fabric LOMs in a vSphere ESX 5.1 HA Cluster

Which components provide direct attached storage for the virtual servers? (Select Three)

A. HP SmartaRRAY p711M Controller

B. HP MSA P2000 g3 Combo
C. HP Smart Array P721m Controller
D. HP D6000 Disk Enclosure
E. HP 3 Gb/s SAS BL Switch
F. HP 6Gb/s SAS BL Switch

Answer C,D,F

33)

A consultant develops a storage concept for an SMB customer. To prepare the CxO presentation, the
consultant must identiry business and technical challenges. Which challenges should be presented
during a meeting with the CEO (Select Two).

A. Data is not protected at the sufficient level.

B. Rack spave is not used efficiently
C. Cost of information is not defines.
D. Operational expenditures (OPEX) have to be reduced.
E. Server provisioning takes too much time.

Answer A,C

34)

An industry leading insurance company in UK has deiced to build a redundant vSphere 5.1 infrastructure
cluster with an HP Blade system and HP 3PAR storeserv storage platform. As their consultant you
propose redundant HP Blade system C7000 Enclosures, FLexFabric Interconnect Modules, and four HP
Proliant BL 660c Gen 8 Servers, with two dual port FLox Fabric LOMs in a VSphere ESX5.1 HA Cluster. The
support department needs to decrease the time of infrastructure management.

Which HP Product provided hardware level management for their HP Server and storage solution?

A. HP System Insight manager

B. Onboard Administrator.
C. Integrated Lights Out
D. Virtual Connect Enterprise Manager.

Answer : A

35)

Scenario:
The consultant is reviewing a customers storage and backup infrastructure design for a possible
upgrade new solution design. The existing environment consists of several HP DL servers connected to
HP 24 SAN Switches. An HP Enterprise Virtual Array 4400 is used as storage for their virtualized servers.
Some HP D2700 Storage systems are direct connected to their windows servers. An HP StoreOnce D2D
1406FC Backup System is used as primary backup target. Once a week backup data copied to an HP MSL
4048 as secondary backup target using HP Data Protector (DP) 6.1.

During the planning phase the consultant has to propost whether the existing solution can be upgraded
or a new solution design is required.

Refer the scenario:

Which resource can be used to gather average performance data of the secondary backup target?

A. HP Performance Assesment Tool

B. HP Media Operations
C. HP Read Data
D. HP Library and Tape Tools

Answer: D

36)

The consultant is reviewing a customers storage and backup infrastructure design for a possible
upgrade new solutions design. The existing environment consist of several HP DL Servers connected to
HP 24 SAN Switches. An HP Enterprise Virtual Array 4400 is used as storage for their virtualized servers.
Some HP D2700 STORAGE SYSTEM ARE DIREST CONNECTED TO THEIR Windows servers. An HP
Storeonce D2D 4106fc Backup Systems is used as primary backup target. Once a week backup data
copied to an HP MSL 4048 as secondary backup target using HP Data Protector (DP)6.1

During the planning phase the consultant has to propose whether the existing solution can be upgraded
or a new solution design is required.

Refer the scenario:

Your customer is concerned about downtime the data migration from their array to the HP 3PAR
Storeserv 7000 Storage System you proposed. Which statement should you include in your proposal to
best address this concern?

A. The HP Enterprose Virtual Array 4400 can be added as external storage to migrate the data.
B. An HP 3PAR Remote Copy relation ship can be established to prevent downtime during
migration.
C. An HP Continuous Access relationship canbe established to prevent downtime during migration.
D. The online Import functionality of an HP 3PAR StoreServ Storage system can be used to migrate
the data.

Answer: D

37)
The consultant is reviewing a customers storage and backup infrastructure design for a possible
upgrade new solutions design. The existing environment consist of several HP DL Servers connected to
HP 24 SAN Switches. An HP Enterprise Virtual Array 4400 is used as storage for their virtualized servers.
Some HP D2700 STORAGE SYSTEM ARE DIREST CONNECTED TO THEIR Windows servers. An HP
Storeonce D2D 4106fc Backup Systems is used as primary backup target. Once a week backup data
copied to an HP MSL 4048 as secondary backup target using HP Data Protector (DP)6.1

During the planning phase the consultant has to propose whether the existing solution can be upgraded
or a new solution design is required

Refer the scenario:

A. Federated Deduplication can be implemented using HP StoreOnce Catalyst

B. A Media Agent can be installed on the HP Storeonce Backup System using the HP DP StoreOnce
Client.
C. Tape Offload can be performed using direct-attached tape drives and the Data Protector echo
copy functionality
D. The new HP Data Protector VTL license model can be applied.

Answer: A

38)

While discussing the new HP Store Easy solution, a customer expresses concerns about potential
performance issues that have been associated with previous generations of Windows NAS systems.

Which new features of the HP StoreEasy solution should you highlight to demonstrate the increased
reliability and performance of the platform for files and applications?

A. Resilient file system (ReFS)

B. Support for Unified LUN Presentation from the GUI.
C. Addition of Fibre Channel Support for file shares and storage for applications.
D. Increased support for 35,000 concurrent users with three shares per single file server.

Answer: C

39)

Which Statements are true when comparing SLC and MLC SSDs (Select Two).

A. MLC Flash devices provide faster write performance.

B. MLC Flash Rash Devices allow higher storage density
C. SLC Flash devices cost less
D. SLC Flash provided greater reliability
E. SLC retains data for a decade without power.

Answer: B, D

40)
When designing an HP 3PAR storeserv environment that involves HP Peer Motion, which configuration
requirements must be considered? (Select Two)

A. All host servers connected to the target array must be removed from the Fibre Channel Zoning
to prevent data corruption.
B. Source and destination arrays must be at InForm softwareversion 3.1.2 or higher.
C. The destination system cannot import volumes with existing Remote Copy membership.
D. Volume Sets are not supported during the migration andvolume-set membership must be
removed.

Answer B,C

41)

Which HP tool comment the server, storage and storage network infrastructure and offers firmware
update recommendations?

A. HP SAN Reported
B. HP SAN Designer
C. HP SAN Health
D. HP SAN Visibility.

Answer: D

42)

The CIO of a company with a business-critical data center wants to allow business units to create virtual
servers and assign storage to meet charging requirements. Which product provided non-technical users
with a self-service portal to create Infrastructure as a Service (IaaS)?

A. HP Intelligent Management Center

B. HP Matrix Operating Environment
C. HP FlexFabric
D. HP Virtual Connect Enterprise Manager

Answer: B

43)

Which HP Product utilizes a common deduplication algorithm across the environment and allow
deduplication at the source, media server or target side?

A. HP StoreSure with Single Instance Storage

B. HP StoreOnce with Catalyst
C. HP SroreEasy with Windows 2012
D. HP Storeserv with Thin Provisioning

Answer: B

44)
Which HP Storage architecture allows you to scale by clustering storage nodes?

A. HP StoreVirtual
B. HP StoreEasy
C. HP StoreSure
D. HP 3PAR StoreServ

Answer: A

45)

A retail company is planning to create a web shop on their website to offer their products and services.
They expect a large increase in sales and increased traffic to their website. And customer satisfaction is a
priority. Additionally the website has to respond quickly detailed product information, pictures and
documentation. Their current environment consists of two HP Blade system C7000 Enclosures
connected to a storage array over a mall SAN. They must have a type backup solution with support for at
least three tape drives.

Which HP Solution meets the customer requirements?

A. HP StoreEver 1/8 G2
B. HP StoreEver MSL 2024
C. HP StoreEver ESL G3
D. HP StoreEver MSL 4048.

Answer: D

46)

Which HP product utilizes a common deduplication algorithm across the environment and allows
deduplication at the source, media server, or target side?

A. HP StoreSure with single Instance Storage

B. HP StoreOnce with Catalyst
C. HP StoreEasy with Windows 2012
D. HP StoreServ with Thin Provisioning

Answer: B

47)

Which HP StoreVirtual feature is unique to the P4900 G2 Storage system?

A. Support for hardware RAID 10

B. Support for Network RAID 5 Only
C. 8GB FC node connectivity
D. Smart SSD Wear Gauge in CMC

Answer: D

48)
The consultant is reviewing a customers storage and backup infrastructure design for a possible
upgrade new solutions design. The existing environment consist of several HP DL Servers connected to
HP 24 SAN Switches. An HP Enterprise Virtual Array 4400 is used as storage for their virtualized servers.
Some HP D2700 STORAGE SYSTEM ARE DIREST CONNECTED TO THEIR Windows servers. An HP
Storeonce D2D 4106fc Backup Systems is used as primary backup target. Once a week backup data
copied to an HP MSL 4048 as secondary backup target using HP Data Protector (DP)6.1

During the planning phase the consultant has to propose whether the existing solution can be upgraded
or a new solution design is required

Refer to the scenario

Your customer is concerned about downtime the data migration from their array to the HP
3PARStoreserv 7000 Storage System you proposed. Which statement should you include in your
proposal to best address this concern?

A. The HP Enterprise Virtual Array 4400 can be added as external storage to migrate the data.
B. An HP 3PAR Remote Copy relationship can be established to prevent downtime during migration
C. An HP Continuous Access relationship can be established to prevent downtime during migration
D. The Online Import functionality of an HP 3PAR StoreServ Storage System can be used to migrate
the data

Answer: D

49)

When designing a solution, what defines the maximum tolerable amount of data loss from an IT Service
due to a major incident?

A. SLO
B. RPO
C. SLA
D. RTO

Answer B

50)

What is the minimum information required to create a virtual volume on a HP 3PAR StoreServ 7000
array? (Select Three)

A. Name
B. Resilience level
C. Physical Disk type
D. Size
E. CPG
F. RAID Level

Answer: A, D, E

51)
Which advantage do 15K RPM drives provide over 10K drives?

A. Higher seek time

B. Higher duty cycle
C. Improved MTBF
D. Decreased rotational latency

Answer: D

52)

Which configuration limits have been increased for HP 3PAR storeserv 7200 arrays with HP 3PAR OS
3.1.3? (Select two)

A. Number of disk drives

B. Remote copy over IP Ports
C. Fibre channel host ports
D. ISCSI/FCOE host ports
E. Maximum supported initiators

Answer: A, E.

53)

When planning an HP Storeonce VSA Solution, which component can significantly impact backup and
restore performance?

A. Datastore Layout
B. Number and type of disk
C. Supervisor Type
D. Replication link bandwidth.

Answer D.

54)

Your customer has implemented a 4TB HP StoreOnce VSA and has a requirement to increase the
capacity to 10 TB. Which STATEMENT IS TRUS REGARDING THE UPGRADE PROCESS.

A. Adding more memory requires the HP StoreOnce VSA to be restarted.

B. The configured hypervisor will need to be restarted.
C. Capacity upgrades requires the HP Storeonce housekeeping to manually be restarted.
D. Installing the additional capacity license requires the HP StoreOnce VSA to be restarted.

Answer:

55)

Which HP tool provided contract and warranty management?

A. HP WEBES
B. HP Insight Remote Support
 C. HP Open View
D. HP System Management Homepage

Answer B

56)

Which software feature is integrated into both HP StoreOnce Backup Systems and HP Data Protector
Software?

A. Data Encryption
B. Thim Provisioning
C. Native MPIO
D. Deduplication API

Answer A

57)

A medium sized warehouse company IT Environment has grown over time. They have recently
virtualized their servers using VMWare technologies. They need a management system based on HP
Servers and storage devices to gain control of their ever growing IT Infrastructure. They do not want to
introduce a learn a new interface.

Which HP Solution do you recommend to the customer?

A. Insight Server for VMware vCenter server

B. Insight Server for VMware vCenter
C. Insight control for VMWare vCenter Server
D. Insight controller for VMware Server.

Answer C

58)

Which HP Software will replace HP System Insight Manager, HP Insight control and HP Virtual Connect
Manager?

A. HP OpenView
B. HP Intelligent Management Center
C. HP One View
D. HP ArcSight

Answer C

59)

Which features would lead you to position an HP 3PAR StoreServ 7200 as a replacement for an existing
HP 8100 Enterprise Virtual Array? (Select Two)

A. Similar Feature Set

B. Compatible Replication protocol
 C. Faster Disk Spindle Speeds
D. Thin Provisioning
E. Seamless Data migration

Answer D, E

60)

Which feature allows SAN switches to accept multiple WWPN registrations on a single port?

A. DCB
B. ISL Tracking
C. SCM
D. NPIV

Answer D

61)

Which statement is true regarding the unit benefit of the HP StoreOnce Catalyst?

A. HP StoreOnce Catalyst provides federated deduplication across all HP StoreOnce Backup system
with HP Data Protector 6.2.1
B. Clients can de-duplicate data on application servers or back-ups servers before it is transferred
to a centralized HP StoreOnce Backup System.
C. Deduplication may occur on the media servers or backup servers before it is transferred to a
centralized HP StoreOnce Backup Systems
D. There is no rehydration of data between any of the HP Backup Platforms.

Answer B

62)

What is the new feature of NFS v4.1 IN Windows Storage Server 2012?

A. Inline Deduplication Autonomic Groups

B. Network RAID Support
C. Continuous Availability

Answer B

63)

Which solution allows HP Data Protector to manage low bandwidth data movement between Backup
hardware devices?

A. HP StoreOnce Catalyst
B. HP StoreOnce VTL Enulation
C. HP StoreOnce Enterprisr Manager
D. HP StoreOnce MAS Targets

Answer A
64)

Which HP Proliant Gen 8 feature accomplishes remote server deployment?

A. Intelligent Management Center

B. Insight Control Server Provisioning
C. Intelligent Provisioning
D. Server Automation

Answer B

65)

A medium sized manufacturing company decides to build a redundant vSphere 5.1 Infrastructure cluster
with HP Blade system. As their consultant, you propose redundant HP Bladesystem c7000 Enclosures for
their local and remote sites. The storage solution you propose is an HP Store Virtual 4000 with remote
replication. To stay within the budget, you decide to use the HP StoreVirtual VSA at the remote site.

Which feature of the VSA must you consider for future growth?

A. Maximum 50TB per VSA

B. Maximum 3 VSA er site
C. Maximum one LAN adaptor per VSA
D. Maximum one VSA per host

Answer A

66)

Your customer has a single HP Blade system c7000 Enclosure. What is the maximum number of D6000
Storage devices that can be attached to the enclosure?

A. 8
B. 2
C. 1
D. 6

Answer D

67)

Which network port requires an Ethernet connection to use the HP Agentless Management Feature on
an HP StoreVirtual 4330?

A. Blade Onboard Administrator.

B. HP iLO management processor
C. Onboard NIC1
D. Integrity Management Processor

Answer B

68)
Which advantage does an HP 3PAR StoreServ Storage System provide in an HP Virtual Connect FexFabric
environment?

A. The Fibre Channel host ports are NPIV enabled.

B. The VCEM can be used to configure the hosts on the storage system.
C. The HP 3PAR StoreServ Systems are FCoE ready.
D. The Fibre Channel Host port can be attached directly to the FlecFabric Modules.

Answer D

69)

What is the first step to achieving a successful data protection and retention strategy?

A. Data Classification
B. Simplified Operations and automation
C. Server Rationalization
D. Hardware refresh

Answer B

70)

You have designed a storage solution with various storage and server components. Which tool should
you use to validate your solution?

A. HP Storage Sizer
B. HP SBW for windows
C. HP EBS Compatibility Metrix
D. HO Single Point of connectivity knowledge (SPOCK)

Answer B

71)

Which security features are used to protect customer data on HP StoreEasy Storage? (Select Two)

A. BitLocker Drive Encryption

B. HP Tipping Point
C. HP Autonomy LiveVault
D. Endpoint security Protection
E. SMB 3.x encryption and signing

Answer C, E

72)

What is the preferred tool for determining Adaptive Optimization (AO) expected performance?

A. Hp Storage Sizer
B. Ninja Thin
C. HP 3PAR System Reporter
 D. NinjaStars

Answer C

73)

Which HP Storage product is optimized for Solid State Drive (SSD) performance?

A. HP 3PAR Storeserv 7450 Storage

B. HP 3PAR StoreServ 7200 Storage
C. HP StoreVirtual 4335 Storage
D. HP StoreVirtual 4730 Storage

Answer A

74)

What does Converged Enhanced Ethernet (CEE) add to legacy Ethernet to allow it to carry block-based
storage traffic?

A. TCP offload
B. Lossless behavior
C. Jumbo frames
D. Data re-reansmission

Answer B

75)

Which requirement differentiates dual-domain from dual-path SAS?

A. Dual-Domain requires dual-port drives

B. Dual-domain requires less hardware
C. Dual-path requires dual-port controllers
D. Dual-path requires active SAS Cables.

Answer A

76)

You are using the HP Storage Sizer to create a Storage solution for your customer. You want to create
the final proposal, but when you start the tool you receive a message that says the license has expired.

What should you do to obtain a new license?

A. Update the license with SUM

B. Browse for it on the HP Website
C. Download it from the HP Partner Portal
D. Send an email to your PAM.

Answer C

77)
When designing a solution, what defines the length of time that is acceptable for a business to be
without a specific application?

A. Call to repair
B. Response Time
C. SLO
D. RTO

Answer D

78)

You have designed a environment based on HP Bladesystem enclosures equipped with Virtual Connect
Ethernet and Virtual connect Fibre Channel modules. The customer has a restricted budget and while
they understand the benefits of the virtual connect Fibre Channel Module, they ask you to use Ethernet
switches instead of the virtual connect Ethernet modules.

How should you respond to the customer request?

A. The Virtual Connect Ethernet module is not needed, but you have to use HP 612XG Blade Switch
instead.
B. The Virtual Connect Ethernet module is not needed but you have to use HP 6125G Ethernet
Blade Switch instead.
C. The Virtual Connect Ethernet module is needed and you always have to use the Fibre Channel
and Ethernet Virtual Connect modules in pairs.
D. The Virtual Connect Ethernet module is required to set up the Virtual Connect Environment.

Answer D

79)

Your customer has an HP MAS P2000 G3 with 48 x 600 GB LFF SAS Drives. The customer asks you for an
upgrade path to the new HP MSA 2040 Storage

What is the recommended upgrade Path?

A. Replace both controllers with HP MSA 2040 controllers and leverage data-in-place upgrades.
B. Use HP Peer Motion Data on the existing HP MSA P2000 G3 and tier it to a new MSA 2040
C. Purchase anew HP MSA 2040 and migrate data from the existing array.
D. Repurpose existing disks and purchase a new chassis, IO Module and controllers.

Answer B

80)

When planning a design for highly available storage clusters operating between multiple data centers,
which factors protect against data center failures? (Select Two)

A. Passive backplanes in nodes

B. Redundant CMC implementation
C. Network Raid 5
 D. Site design and quorum managers
E. Data replication

Answer B, E

81)

You are demonstrating the HP D6000 enclosures for HP Bladesystem to a customer who has existing
blade enclosures and requires high density, low-cost external zoned storage. Which software do you use
to assign a zone of HP D6000 drive Days to an HP Bladesystem server bay?

A. Virtual Connect Manager (VCM)

B. Virtual SAS Manager (VSM)
C. Array Configuration Utility (ACU)
D. Onboard Administration (OA)

Answer B

82)

Which Storage functionality is leveraged to enable single volume migration with the HP 3par os 3/1.3
Storage federation enhancement? (Select two).

A. HP 3PAR StoreServ Port Persistance

B. HP 3PAR StoreServ Remote Copy
C. HP 3PAR StoreServ Peer Persistence
D. HP 3PAR StoreServ Peer Motion
E. HP 3PAR StoreServ ALUA Compliant host personas

Answer B, E

83)

What are characteristics of SSD drive technology? (Select Two)

A. Any SSD will immediately lose data when power is removed

B. SSD Drives are recommended for storage array-tiring stratergies
C. SSD Drives compress data natively via the drive interface with an embedded controller
D. SSD Drives provide faster write performance by eliminating the need for raid calculations
E. SSD Drives manage wear leveling via the drive interface board and embedded controller.

84)

You are working with the local hospital to update their aging storage environment, which uses mid-
range arrays. The hospital has a limited budget and is very concerned with Availability and security.

Which Solution best addresses the customer issues?

A. HP 9500 Storage Array with SED and CSS

B. HP Storeserv 7200 with proactive care
C. HP Storeserv 7400 4node with SED and DMR
 D. HP StoreVirtual Network RAID-10 and DMR

Answer C

85)

An enterprise customer is planning a tape backup system. They want to implement an open format
technology that uses linear recording. Which tape technology should they implement?

A. LTO
B. SDLT
C. AIT
D. DAT

Answer A

86)

Which benefits does HP Federated storage provide? (Select Two)

A. Simplified hardware maintenance

B. Ability to shift workloads at anytime
C. Full utilization of arrays for efficient capacity pooling
D. Converged networking to reduce cabling costs
E. Standardized platforms to simplify operations.

Answer B, C

87)

A customer needs to implement an enterprise storage with the lowest cost per gigabyte. Which drive
technology should the customer use?

A. SATA
B. ATA-II
C. SAS
D. SCSI

Answer C

88)

Which deduplication method is used by inline deduplication devices?

A. Object Differencing
B. Zone level
C. Byte-Level-delta
D. Hash-based chunking

Answer D

89)
A leading retail, corporate and investment back server about 15 million customer within central and
eastern Europe. They need an archiving solution to comply with the regulations. Which HP Solution
should you select for this task?

A. HP Interactive Archive Portal

B. HP Internet Archive Platform
C. HP Integrated Archive Portal
D. HP Integrated Archive Platform

Answer D

90)

An international logistics company needs a fast data protection solution. They have a head office and
mote than 30 branch offices world-wide. They also require low-bandwidth replication to their head
office. Which HP Storage solution fits these requirements?

A. One HP StoreOnce 4420 per site

B. One HP StoreOnce 4220 per site
C. One HP StoreEver MSL 4048 per site
D. One HP StoreEver MSL 2024 per Site

Answer A

91)

Your customer has two sites and you have selected to use the HP P2000 MSA storage array as their
storage solution. You plan to implement remote snapshot replication between these sites. Which
controller does not support this functionality?

A. HP P2000 G3 iSCSI MSA Controller

B. HP P2000 G3 SAS MSA Controller
C. HP P2000 G3 Fibre Channel MSA Controller
D. HP P2000 G3 MSA FC/iSCSI Combo MSA Controller

Answer B

92)

A company needs a solution that provides storage only as needed. The companys goal is to reduce
capital expenditures and lower the power and Cooling overhead to reduce operating expenditures.
Which type of storage implementation meets these requirements?

A. ThIN Provisioning
B. Scale-out Storage Arrays
C. Scale-up Storage Servers
D. Virtual Storage Arrays

Answer D

93)
A customer wants to upgrade their architecture and is considering a backup to tape solution. They want
to achieve the highest performance possible with his solution. Which critical performance factor should
they consider when choosing a tape device?

A. The ability to keep the device streaming

B. The capacitu of the tape cartridges
C. The type of backup software being used.
D. The type of data to be backed up.

Answer A

94)

Which feature of SNMP defines the structure of the SNMP response relative to a device subsystem?

A. SNMP Agent
B. Managemetn Information Base (MIB)
C. SMNP Manager
D. SNMP trap

Answer B

95)

A company uses Fibre channel over Internet Protocol (FCIP) to connect their Fibre channel fabrics into a
unified, single-fabric SAN. The company requires high availability and performance in their storage
environment. Which type of inter-switch link (ISL) configuration should the company implement?

A. Slit-site link
B. Shared Link
C. Single Link
D. Dual Link

Answer D

96)

What is the effect of using deduplication together with remote replication?

A. Reduced volume of data to be transferred across a low bandwidth network

B. Increased number of disks required to store the data at a remote location
C. Increased security of the data that is transferred across an insecure network
D. Reduced risk of corruption during transfer of the data to a remote location

Answer A

97)

A company is planning to implement a disaster recovery site. The site must provide highest level of data
availability, with minimal latency. Which type of replication should the company use?

A. IP-based asynchronous
 B. Fibre Channel asynchronous
C. IP-based synchronous
D. Fibre Channel Synchronous

Answer D

98)

Which feature of SMI-S enables logical unit numbers (LUNs) to be created for HP Storage?

A. Service Location Protocol (SLP)

B. We-based Enterprise Management (WBEM)
C. Common Informatino Model (CIM)
D. Storage Profiles

Answer C

99)

What are the best types of ports uses in the Fibre Channel SAN? (Select Three)

A. E_Port
B. F_Port
C. H_Port
D. A_Port
E. N_Port
F. J_Port

Answer A, B, E

100)

Which hash-based algorithm for storage deduplication provides the lowest risk for hash collisions?

A. AES-256
B. SHA-1
C. MD5
D. CRC32

Answer B

101)

The system administrator wants to add five external juke boxes with four disks each to the wide SCSI
controller of a server. The internal boot disks and CD-ROM are installed on a second controller. How
many additional LUNs will be visible on the server after connecting the juke boxes

A. 4
B. 5
C. 20
D. 25
Answer C

102)

A system administrator is managing a massively-scalable high-performance storage system. The

administrator needs to create virtual private arrays with advanced workload segregation without
compromising performance. Which feature of converged utility storage enables the administrator to
accomplish this task?

A. Multitenancy
B. Autonomic tiering
C. Storage orchestration
D. Autonomic management

Answer A

103)

A company has deployed a large tie share, and expects 100 GB of new or changed data each day. The
company would like to backup all objects in the file share and restore the share as quickly as possible.
The company would share and restore the share as quickly as possible. Which technology should the
company use?

A. Incremental Backups
B. Synthetic Full Backups
C. Differential Backups
D. Full Backups

Answer B

104)

What is the purpose of LUN presentation?

A. To enable/disable a specific host to access a LUN

B. TO allow tape devices to access data on a LUN
C. To prevent large I/O reads from disk devices
D. TO create shared folders on Ethernet-attached storage

Answer A

105)

A company has Fibre Channel based SAN in their data center based on 2 GB SAN Switches. The switches
are connected as shown in the exhibit. Which SAN technology is described by this configuration?

A. Core-edge
B. Ring
C. Mesh
D. Cascade
Answer D

106)

A system administrator is configuring an array with 48 Drives. The array stores mission-critical data for
an application that requires large logical volume. The array must support simultaneous failures of any
two drives without downtime or data loss. How must the RAID level be configured to meet these
requirements?

A. RAID0
B. RAID 1+0
C. RAID 5
D. RAID 6

Answer D

107)

Which component is the same for both SAS and SATA drive technology?

A. Single chain terminator

B. Signal encoding/decoding processor
C. Driver model transparent to parallel ATA
D. Electrical and physical interface

Answer D

108)

What benefits do autonomic management and storage tiering provide? (Select Two)

A. Increased data control

B. Reduced power consumption
C. Increased storage capacity
D. Lower total cost of ownership
E. Reduced administration time

Answer D, E

109)

A company produces petabytes of data and the amount increases daily. They require a storage solution
that can scale storage capacity and processing power as the data increases. Which type of storage
solution should the company consider?

A. Scale-through controller with multi-connection DAS Disk enclosure

B. Scale-out SAN with converged utility storage
C. Scale-over NAS with monolithic storage platforms
D. Scale-up SAN with dedicated storage controller

Answer B
110)

A mid-sized company with a small virtual tape library needs to implement a low-cost deduplication
strategy. The data to be backed up is in a variety of formats and is not mission-critical. Which
deduplication technology meets this companys requirements?

A. Hash-based Chunking
B. Object-level Differencing
C. Post-copy comparison
D. Host-level File swapping

Answer A

111)

In addition to performing backup-to-disk, for which other operation can an HP StoreOnce NAS share be
used?

A. To host application libraries

B. To seed an applicance for replication
C. As a mail server data store
D. As a drag and drop file repository

Answer B

112)

What is a main difference between Small Form Factor Pluggable (SFP) and Small Facotr Pluggable Plus
(SFP+) modules?

A. Port density
B. Physical Size
C. Maximum transfer rate
D. Different Pinout

Answer C

113)

A customer needs to connect a dedicated file sharing storage device to an existing LAN infrastructure at
an affordable cost. Which type of storage solution meets these requirements?

A. NAS
B. VLS
C. SAN
D. DAS

Answer A

114)
A customer has an HP D6000 Disk enclosure with 70 LFF Universal SAS drives. Assuming that the mean
time between failure(MTBF) of a single disk is 1,400,000 hours, what is the MTBF of the fil array

A. 20,000 Hours
B. 40,000 Hours
C. 700,000 hours
D. 1,400,000 hours

Answer A

115)

A system administrator needs to locate storage resources on an IP network by using an iSCSI initiator to
query for a list of targets. What should be administrator use to accomplish this goal?

A. Domain Name Server (DNS)

B. Internet Storage Name Service (Isns)
C. Light weight Directory Access Protocol (LDAP)
D. Information Transfer Channel (ITC)

Answer B

116)

What is one of the key advantages of converged network adaptor (CNA)?

A. Greater available bandwidth

B. Faster data transfer rate
C. Multiple Traffic types share the same link
D. Standardized connector for all components

Answer C

117)

A company needs to comply with regulatory requirements to keep all financial data for long periods of
time. What should the company implement?

A. Data backups
B. Snapshots
C. Tape rotations
D. Data archives

Answer D

118)

The system administrator plans to migrate a RAID 1 volume to RAID 5. What is required to migrate the
volume successfully?

A. Sufficient unused drive space

B. Minimum of five drives
 C. HP Option ROM configuration for array (ORCA)
D. A minimum of 2 GB RAID cache memory

Answer A

119)

A company is planning their backup strategy. They intend to implement a grand-father-son tape rotation
scheme. What is the minimum requirement for tape storage capacity per week?

A. Half the size of the data to be backed up

B. The same size as the data to be backed up
C. Two times the server storage capacity
D. Three times the server storage capacity.

Answer A

120)

Which drive bus technology uses full duplexing with link aggregation?

A. ATA
B. SCSI
C. SATA
D. SAS

Answer D

121)

Which HP resource can be used to verify storage and operating system rules and interoperability
between third-party system for your design?

A. A SANdesign Concepts
B. Systems-interoperability Matrix
C. SANdesign Preference
D. Compatibility Matrix

Answer D

122)

Your customer has an existing Fibre Channel SAN but wants to reduce the number of cables and connect
their new UP BladeSystem C7000 chassis to the SAN. The customer wants to use the onboard LAN on
motherboards (LOMs) of their G7 Wade servers to connect to their Fibre channel network. Which c-
class interconnect solution would server this purpose?

A. Virtual Connect FlexFabric modules

B. Virtual Connect Flec 10 modules
C. Virtual Connect Fibre Channel Modules
D. HP ProCurve 10GE modules
Answer A

123)

Your customer wants a multi-site p4000 configuration across campuses. Site protection has to be
implemented where retention of full site data is possible when there is loss of communication between
sites. Which P4000 functionality support this requirement?

A. Advance Snapshot Replication

B. Remote Copy
C. Network RAID
D. Failover Manager

Answer C

124)

A customer is planning attendant backups of multiple branch offices. They do not need off-the storage.
But rapid redistributes are essentials. Which backup storage technology should they implement?

A. Backup to disk based storage

B. Backup to local tape drives
C. Backup to SAN-attached tape libraries
D. Backup to network-shared optical jukeboxes.

Answer B

125)

Which task is performed in the first stage of a storage infrastructure assessment?

A. Power and cooling requirements are evaluated

B. Storage performance and management software are installed
C. Inventory of system, software and employee skills is taken.
D. Recommendation for designing a storage infrastructure are formulated.

Answer A

126)

What should run on servers that share access to the same P2000 G3 MSA storage LUN to preserve data
integrity?

A. Virtualization software
B. LUN Provisioning tools
C. MPIO DSM
D. Cluster Software

Answer C

127)
A company has a SAN with storage array has configured the LUN with RAID. The company needs local
physical copies of the LUNS. Which technology should the company use?

A. Replication
B. Clustering
C. Snapshots
D. Clones

Answer D

128)

A business is growing from a small, tightly control SAN environment to a much larger configuration that
is dynamic and may require connection to be moved from one port location to another. Which zoning
configuration would best meet the needs of this business?

A. No fabric zoning
B. Domain ID and port numbers
C. WWN Zoning
D. VSAN partitioning

Answer C

129)

A company uses a tape based backup system to perform nightly backups of shared data. The company
would like to minimize the backup window and minimize the amount of tapes needed to restore data.

A. User-defined backups
B. Differential backups
C. Incremental backups
D. Full backups

Answer C

130)

What is one similarly regarding hos CIFS shares and NFS shares can be used?

A. A file within either a CIFS or an NFS share can only be opened by one user at a time
B. A file within CIFS and NFS shares can be opened by multiple users at a time.
C. Different users can access individual CIFS and NAS shares simultaneously
D. Only one user at a time can be allocated access to any single CIFS on NAS share.

Answer B

131)

Which feature of the SAS-2 protocol enables deployment flexibility, security and data traffic
management?

A. Zoning
 B. Fanout expanders
C. Edge expanders
D. SAS Protocol Layer (SPL)

Answer D

132)

A CUSTOMER WANTS TO UPGRADE TO A BACKUP SOLUTION THAT PROVIDED FAST RESTORES WITH
LONGER DATA RETENTION TIMES AND EASY INTEGRATION. Which BACKUP SOLUTION MEETS THEIR
REQUIREMENTS?

A. A remote replication solution

B. An application based disk backup solution
C. A NAS appliance
D. A virtual library system

Answer D

133)

A system administrator at an enterprise company wants to extend the storage array of the server by
using existing older disk drives. Because of the similar size of the older drives, the administrator needs at
least 18 physical disks. The company needs to ensure that if two drives fail simultaneously, no data loss
occurs. Which RAID level should the system administrator use to configure the drives?

A. RAID 1+0
B. RAID 3
C. RAID 5
D. RAID 6

Answer D

134)

A company is planning to implement a disaster recovery site to protect only data identified as
important. Which type of disaster recovery site should the company implement?

A. Hot site
B. Hybrid site
C. Warm site
D. Cold site

Answer C

135)

Which Fibre Channel Port type is a fabric port with arbitrated loop capabilities that connects to another
node or switch port?

A. N_PORT
 B. FL_PORT
C. E_PORT
D. NL_PORT

Answer D

136)

Which level of storage virtualization offers the best combination of flexibility, performance, capacity and
ease of management?

A. SAN Switch level

B. Storage device level
C. Network level
D. Server level

Answer B

137)

Which hardware module connects SC Fibre optic cables to device and changes electrical signals to
optical signals?

A. Gigabit link module (GLM)

B. Fabric Extender Transceiver (FET)
C. Gigabit interface convertor (GBIC)
D. Small form factor pluggable (SFP) transceiver

Answer C

138)

A customer running mission-critical applications in the data center to choose the best enterprise storage
technology based on reliability, performance, and cost. Which drive technology meets this requirement?

A. ATA
B. IDE
C. SCSI
D. SAS

Answer D

139)

A customer requires a highly available storage solution that is easy to manage. The solution must
provide high performance and scalability. Which type of storage technology meets this customers
requirements?

A. Storage arrays with SAS disks based on virtualization and SAN connectivity.
B. Storage arrays with SATA disks connected by using iSCSI SANs
C. SCSI storage arrays connected by using iSCSI SANs
 D. SCSI storage arrays based on virtualization and SAN connectivity.

Answer A

140)

A customer is using and HP StoreOnce solution that is configured to use a virtual tape library. Which
other configuration can the customer implement on the Store Once solution?

A. RDX drive support

B. Optical Jukebox emulation
C. Business Copy data mover
D. NAS backup to disk targets.

Answer D

141)

What is an advantage of Serial ATA technology compared with Parallel ATA?

A. Point-to-point connections with hot plug capability

B. Larger pin count on the connector
C. SCSI compatible configuration with jumpers
D. High voltage differential signaling

Answer A

142)

A network administrator needs to consolidate cables adaptors and switches in a mixed Ethernet and
Fiber Channel environment. Which protocol enables the administrator to accomplish this task?

A. Fibre Channel over ATM

B. FCoE
C. TCP/IP
D. FCIP

Answer B

143)

Which HP federated storage technology allows customers to non-disruptively shift data between
storage systems?

A. Remote Replication
B. Peer Motion
C. Online Conversion
D. Online Copy

Answer B

144)
Which SCSI bus specification supports a maximum distance of 12 meters?

A. Single-Ended SCSI
B. High voltage differential SCSI
C. Serial Attached SCSI
D. Low voltage differential SCSI

Answer D

145)

A company needs to lower operational power and cooling costs while preserving their existing Ether and
Fibre Channel infrastructure. TO achieve this goal, they plan to reduce the number of separate adapters
and cables required in their data center. What can they use to achieve this goal?

A. Host channel adapters (HCAs)

B. InfiBand target channel adapters (TCAs)
C. Network interface cards (NICs) with offloading
D. Converged network adapters (CANs)

Answer D

146)

A customer requires a multitenancy high-performance, and massively-scalable storage solution. Which

technology should the customer use to meet this requirement?

A. Converged utility storage

B. Scale-out storage software
C. Standardized storage platforms
D. Server based storage virtualization

Answer A

147)

A company is implementing a disk-based backup strategy that requires maximum efficiency of the
backup storage. Which technology provided this capability?

A. Clustering
B. Deduplication
C. Cloning
D. Replication

Answer B

148)

A customer is considering purchasing a VLS. Because of budget constraints they want to maximize data
compression as a way to minimize costs. Which factors affecting the deduplication ratio for backup are
important for the company to consider? Select Two
 A. Data change rate
B. Data retention policy
C. Number of data streams
D. Amount of allowable ???? time
E. Capacity of the tape cartridges

Answer A, B

149)

When designing an HP Virtual connect FlecFabric network, how many download connections can be
configured per module pair to an HP ProLiant BL460c. Gen8 server with an HP FlecFabric 2-port
FLecLOM?

A. 2
B. 4
C. 8
D. 16

Answer C

150)

You have recommended a new storage solution to your customer and have already created your design
with the HP Storage Sizer. The next step is to provide then a budgetary quote.

What is the best way to create the quote?

A. Send your design to HP and ask them to help.

B. Cut and paste the data into an Excel spreadsheet
C. Push the quote button in the HP Storage sizer
D. Export the data to SBW and use the Quote tool

Answer D

151)

Which HP management tool does Virtual Connect Enterprise Manager (VCEM) plug in to?

A. HP integrated Remote Console (IRC)

B. HP Enclosure Firmware Management (EFM)
C. HP Systems Insight Manager (SIM)
D. HP Network Node Manager (NNMi)

Answer C

152)

Which HP StoreVirtual Features is unique to the P4900 G2 storage system?

A. Support for hardware RAID 10

B. Support for Network RAID 5 only
 C. 8GB FC node connectivity
D. SmartSSD Wear Gauge in CMC

Answer D

153)

Which description is true of Federated Storage?

A. Spontaneous migration of heavily utilized blocks of data

B. Non-disruptive data movement between storage systems in a peer-to-peer relationship
C. Interoperation of storage system in a heterogeneous multi-vendor environment
D. Dynamic storage system expansion with no downtime

Answer C

154)

What does an Instant-On enterprise need to achieve business agility, operational efficiencies and
improved risk management?

A. Management
B. Standardization
C. Consolidation
D. Innovation

Answer D

155)

An online gaming company is using vMotion to move a running virtual machine (VM) from one physical
host to another without turning off the VM. Which HP Intelligent Management Center module manages
the VM Migration?

A. Network Traffic Analyzer

B. Virtual Network Manager
C. Virtual Connect Manager
D. Wireless services manager

Answer C

156)

Which HP 3PAR Storeserv tool can be user to collect detailed server configuration information such as
the OS type and version, WWN of HBAs, the iSCSI name and host multipathing information over a
secure communication channel?

A. Recovery Manager
B. Web Services API
C. System Reported
D. Host Explorer
Answer D

157)

Which improvement to the standard features of HP StoreEasy Storage enables deduplication of Data?

A. HP StoreOnce Software
B. HP Smart Array Advanced Pack 2.0
C. HP Daa Protector Software
D. Microsoft Windows Storage Server 2012

Answer D

158)

What enabled HP StoreEasy Storage to replicate only changes file blocks instead of the entire file?

A. File Screening Management

B. Cyclical Redundancy Check
C. File Classification Infrastructure
D. Remote Differential Compression.

Answer D

159)

A global engineering companys IT manager needs to give offshore contractors access to specific
corporate data and applications. Permission is requires to access the network anytime from anywhere
on almost every device. Which management solution can authenticate network access and determine if
the endpoints are complaint with the security policies of this company?

A. Wireless Services manager

B. User Access Management
C. HP Peer Motion
D. Virtual Network Manager

Answer B

160)

Which features are key benefits of the HP 3PARStoreServ architecture? (Select Two)

A. Fully meshed cluster architecture

B. Network RAID High Availability
C. Secure retention of storage columes
D. Built-in deduplication technology
E. Built on industry standard HP Proliant technology.

Answer A, C

161)
What needs to be considered when sizing a solution which will utilize HP 3PAR Snapshots?

A. Additional host ports will be required

B. Snapshots need to be written at 64K Blocks
C. Backend IOs will increase
D. To ensure performance, additional system cache is used.

Answer D

162)

Which attributes can be specified in an HP Virtual Connect Server Profile? (Select Two)

A. iSCSI initiator Name

B. Boot Parameters
C. Fibre Channel Zoning
D. MAC and WWN addresses
E. Server Hostname

Answer B, D

163)

Which HP Storage solution is built on an architecture that allows a customer to scale capacity and
performance linearly without incurring downtime or performance bottlenecks?

A. HP StoreSure
B. HP StoreServ
C. HP StoreEasy
D. HP StoreVirtual

Answer D

164)

Which statements are true about Network RAID implementations? (Select two)

A. RAID 10 in a multi-site SAN ensures that data remains available in the event that one site
becomes unavailable.
B. The best applications for using Network RAID 5 volumes include applications with mostly write,
random workloads.
C. Network RAID 10_1 is preserved in the event that three storage systems become unavailable
D. All volumes are protected from a reboot of a store Virtual Cluster during a Left hane OD
firmware Upgrade
E. Network RAID 10_2 ensures that data remains available half of the SAN is unavailable

Answer A, E

165)

Which HP B-Series SAN switch feature enables the direct connection of servers to any SAN fabric?
 A. Access Gateway
B. Server Application Optimization
C. Extended Fabric
D. Adaptive Networking

Answer A

166)

What is required in order to implement a Software-Defined Network (SDN)? (Select Two)

A. Support for redundant data pathways using available bandwidth

B. Data flow evaluation that allows high value data flows to move through the network before low
value flows.
C. Integration of the infrastructure, control and application layers into a single, physical switch
D. Programmable modification of packet forwarding rules across multiple devices
E. Dynamic application of packer policy across multiple devices.

Answer A, B

167)

Which resource supports implementing a drawing of the storage network cable management in the
documentation?

A. HP Single Point of connectivity knowledge (SPOCK)

B. HP Storage Sizer
C. HP Network Design Center
D. VisioCafe

Answer D

168)

When planning a design for highly available storage cluster operating between multiple data centers,
which factors protect against data center failures? (Select Two)

A. Passive backplanes in nodes

B. Redundant CMC implementation
C. Network Raid 5
D. Site design and quorum managers
E. Data replication

Answer B, E

169)

When designing a virtualized storage and network environment, which factor would lead an architect to
specify HP Virtual Connect Flex-10 over HP virtual connect FlexFabric?

A. If Fabric channel connectivity is not required

 B. If the environment required a dedicated iSCSI network
C. If Boot-from SAN is required
D. If the environment contains G7 blades

Answer A

170)

Which HP Storage architecture allows you to scale by clustering storage nodes?

A. HP StoreVirtual
B. HP StoreEasy
C. HP StoreSure
D. HP 3PAR StoreServ

Answer A

171

The CIO of a company with a business ctirical data center wants to allow business units to create virtual
servers and assign storage to meet charging requirements. Which product provides nontechnical users
with a self service portal to create infrastructure as a service (IaaS)?

A. HP Intellegent Management Center

B. HP Matrix Operating Environment
C. HP FlexFabric
D. HP Virtual Connect Enterprise Manager

Answer B

172)

Which security features are used to protect customer data on HP StoreEasy Storage? (Select
two.)

A.
BitLocker Drive Encryption

B.
HP TippingPoint

C.
HP Autonomy LiveVault

D.
Endpoint security protection

E.
SMB 3.x encryption and signing
173)

Which part of the HP Storage portfolio is described as a converged protocol storage system?

A.

HP StoreEasy

B.

HP 3PAR StoreServ

C.

HP StoreQnce

D.

HP StoreVirtual

A customer requests a storage and server environment assessment prior to the installation of

additional SAN components. Which HP software utility provides a quick and accurate view of the

customers SAN topology?

A.

Storage Security Self-Assessment Tool

B.

SAN Visibility

C.

Storage Product Selector

D.

SAN Designer

A customer requests a storage and server environment assessment prior to the installation of

additional SAN components. Which HP software utility provides a quick and accurate view of the

customers SAN topology?

A.

Storage Security Self-Assessment Tool

B.

SAN Visibility

C.

Storage Product Selector

D.

SAN Designer

A customer has recently completed an acquisition. The original data center consisted of HP

BladeSystem servers and an HP LeftHand P4000 Storage solution. The acquired environment

consists of servers with only internal storage. What would you recommend to the customer to

create a highly available replication environment for their data? (Select two)

A.

HP StoreOnce VSA

B.

Riverbed WAN replicator

C.

Network RAID

D.

HP StoreVirtual VSA

E.

HP Virtual Connect FlexFabric

Which tool provides the ability to export a graphical view of your storage solution?

A.

NinjaStars

B.

ActiveAnswers
C.

HP SalesBuilder for Windows

D.

HP Storage Sizer

A customer has an existing HP 3PAR StoreServ array.The customer wants to enable the existing

storage to provide highly efficient and consolidated primary storage, as well as information

retention with file archiving and object services

Which product provides these features?

A.

HP StoreQnce VSA

B.

HP StoreEasy 3830 Gateway

C.

HP StoreAll 8200 Gateway

D.

HP StoreVirtual VSA