Database Programming Project Proposals

Zhizhang Shen
Dept. of Computer Science and Technology
Plymouth State University
August 15, 2017

Abstract
This is Part III of the lab notes prepared for the students of CS3600 Introduction
to the Database Systems for Fall 2017.
We present a few ideas which you can use to develop your project proposal for this
course.
This project worths fifteen points. We also give some specific criteria, in 4, as how
the students will be graded for their performance in completing this project.

Contents
1 The rule of the game 2

2 Project proposals 2
2.1 Video Chain Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 Library Management System . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.3 A Music Store Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 University Student Database . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.5 Department Management Database . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Grade Book Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3 What to hand in... 9

4 Grading 10

Address correspondence to Dr. Zhizhang Shen, Dept. of Computer Science and Technology, Plymouth
State University, Plymouth, NH 03264, USA. E mail address: [email protected].

1
1 The rule of the game
To apply some of the stuff as we have been learning in this course, and to develop some
habits of team work, the class will be cut into a few project teams, each with 3 to 4 students.
Each team will elect a project leader, come up with a project proposal, a rough schedule, and
complete the project by the end of this semester. The project will then make a presentation
to the whole class.
In principle, all the members of the same team will be assigned the same grade. All the
members of a team are expected to make a reasonable contribution, and the team leader will
make a report about what each and every team member has done, which will be taken into
consideration when a grade is assigned.

2 Project proposals
We list seven proposals in the following. Some of them are adapted based on some ideas as
contained in [2].
A project team can certainly come up with their own non-trivial proposal.

2.1 Video Chain Database

This is essentially a management system for a chain of video stores. Thus, those stores
might share the same inventory, but each store has its own rental records, and employee
records. Thus, such a database should contain information about Stores, Employees, Movies,
Members, Rentals, and Vendors.
The group should go through the following steps in completing this project:
1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.
2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.
3. Use MySQL to create the normalized tables.
The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.
4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.

2
 For example, one possible trigger could be placed and then acted upon after the last
copy of a movie is being rented out.
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.

5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.

6. Write an interface in HTML, with embedded Php script(s). The main interface should
contain a Main menu, including Member functions, Administrative functions, and Re-
porting functions.

Implement the password security mechanism as described in Section 5.1.1 in the

Php Notes.
The Member page should include such functions as Check out, New member sign-
up, list of videos for a member that have yet to be returned, and Membership
cancellation.
The administrative page should include such functions as add/delete employees,
buy new tapes, , as well as open new stores, etc..
The report page should include such features as print the whole catalog, print a
due list of tapes, print the employee list, print rental summary (ordered by rental
frequency, etc..

The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.

7. Document the project, containing at least the pieces as pointed out in the above.

2.2 Library Management System

This is supposed to develop a database system for the local library. Your finished product
should contain information about books, book authors, publishers, employees, ILLs, and
borrowers.
The group should go through the following steps in completing this project:

1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.

3
2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.

3. Use MySQL to create the normalized tables.

The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.

4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.
For example, One of such before triggers could be that someone wants to check out a
book on how to build bombs
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.

5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.

6. Write an interface in HTML, with embedded Php script(s).

The top page should direct the users to either Patron functions, Administrative
functions, or Reporting functions.
Implement the password security mechanism as described in Section 5.1.1 in the
Php Notes.
The Patron page should include such functions as check out, sign-up, return, pay
fine, and etc..
The administrative page should include such functions as buy a new book, sell a
book, search for book (by title, subject, author), and patron cancellation.
The report page should include such features as print the patron list, print a due
list, print the ILL list, print monthly Ten Hot Book list, etc..

The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.

7. Document the project, containing at least the pieces as pointed out in the above.

4
2.3 A Music Store Database
This is to develop a database for a Music store. You product should contain information
about Employees, Inventory, Customers, Sales, and Returns.
The group should go through the following steps in completing this project:

1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.

2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.

3. Use MySQL to create the normalized tables.

The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.

4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.
For example, one such before triggers could be that some one returns a piece s/he
bought on the same day. As an action, you might want to ask him/her questions as
why it is returned.
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.

5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.

6. Write an interface in HTML, with embedded Php script(s).

Implement the password security mechanism as described in Section 5.1.1 in the

Php Notes.
For the Sales/Return submenu, you should include such functions as Process a
sale, process a return, view a sale, and view a return.
For the administrative submenu, you should include such functions as add/delete
employees, add/drop stuff , add/drop customer, etc..

5
 For the report submenu, you should include such features as print the whole
catalog, print a list of stuff (by format such as CD, tape, DVD, or by category),
print the employee list, print monthly Top Ten lists, print out the Most Returned
List, etc..

The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.

7. Document the project, containing at least the pieces as pointed out in the above.

2.4 University Student Database

This is supposed to develop a database for the College. Your finished product should contain
information about courses and their sections, departments, instructors, students, as well as
Enrollments.
The group should go through the following steps in completing this project:

1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.

2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.

3. Use MySQL to create the normalized tables.

The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.

4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.
For example, one such before triggers could be that when a student fails to maintain
full-time status after dropping another course. An action could be to remind him that
his/her parents can no longer cover his/her medical insurance.
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.

5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.

6
 6. Write an interface in HTML, with embedded Php script(s).

Implement the password security mechanism as described in Section 5.1.1 in the

Php Notes.
The student page should include such functions as register for a course, add/drop
a course, asks for a copy of transcript, and pay fees.
The administrative page should include such functions as create a new course and
drop an existing one, add sections of an existing courses and drop one, as well as
add/drop a student.
The report page should include such features as print the whole schedule, print an
individual schedule, print the student list of a course, or a department, etc..

The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.

7. Document the project, containing at least the pieces as pointed out in the above.

2.5 Department Management Database

This is supposed to develop a database for an academic department. You product should
contain information about administration, faculty, programs, assessments, committees and
various documents.
The group should go through the following steps in completing this project:

1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.

2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.

3. Use MySQL to create the normalized tables.

The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.

4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.

7
 For example, one of such triggers could be to check when a certain date comes up,
e.g., May 1, to see if a faculty has filed an annual report. If not, whenever that faculty
member signs up, show a warning message.
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.
5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.
6. Write an interface in HTML, with embedded Php script(s).
Implement the password security mechanism as described in Section 5.1.1 in the
Php Notes.
The Information page might contain something like general announcements, news
information, etc..
The administrative page should include such functions as add/delete/update fac-
ulty, form/dismiss/update committees, as well as add/delete/update programs,
etc..
The report page should include such features as print various documents, print
a list of faculty members/committee members, and check out the assessment re-
sults (maybe some statistics should be provided), etc..
The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.
7. Document the project, containing at least the pieces as pointed out in the above.

2.6 Grade Book Database

This is supposed to develop a database to manage a grade book. You product should
contain information about courses, students, grades for homework, quizzes, midterm, final,
and various letter grades.
The group should go through the following steps in completing this project:
1. Design the database, following an E/R approach; then go through the normalization
process to come up with a collection of tables that are in Boyce-Codd normal forms.
The team has to include the original design in terms of E/R diagrams and paper work
to show the normalization process in the final documentation.
2. Describe some realistic constraints such as primary keys, foreign keys, check con-
straints, and not null constraints, for the tables and attributes, etc..
The team has to include a requirement document in the form of the one as discussed
in [1, 14.2], a preliminary analysis and a list of final constraints.

8
 3. Use MySQL to create the normalized tables.
The team has to come up with a list of print-outs of the table structure and the content,
similar to those as contained in the lab notes.
4. Do a research on how the most recent version of MySQL implements the concept of
triggers and then create appropriate triggers for your database. to maintain integrity
of the database and to perform appropriate actions on database updates.
For example, one such after triggers could be that when an F is generated as the
grade for a student, generate a sympathetic email message to the student. How should
this be done exactly?
The team has to come up with a list of issues, and a discussion as whether an issue
can be resolved with a trigger, before, after or instead; and why it is not done.
5. Populate the database by using MySQL statements, or with some QUI interface such
as PhpMySQLAdmin.
6. Write an interface in HTML, with embedded Php script(s).
Implement the password security mechanism as described in Section 5.1.1 in the
Php Notes.
The administrative page should include such functions as add/delete /update
courses/students/grades. Certain security measure, such as password, should be
included. Certain feature on curving should also be included.
The report page should include such features as printing out grades for courses,
with certain restrictions such as printing out only those who fail the course, and
given a name, or a student number, looking for his/her grade, and randomly
generating unique pseudo name for students for a course, and printing out labels
for the whole class, etc..
The group should include in the final documentation a list of questions a user of this
system might want to ask, together with a list of MySQL queries that help to answer
them.
7. Document the project, containing at least the pieces as pointed out in the above.

3 What to hand in...

Hand in a general description of the project, the database design, interface design, the source
code (a hyperlink when applicable), as well as the database tables, and any other supporting
material, when you come to attend the last class of this course.
Check out the course page for a sampler writing, which is one way to summarize all the
work that you will have done for this project.
A presentation will be held at the end of this semester to the class.

9
4 Grading
This project will add up to 15 points towards the total grade of the course, and is graded
by the following criteria:

1. Database design: A well developed database, as described in a well written and readable
document, a set of appropriate ER charts, a collection of normalized tables obtained
through a normalization process, appropriate keys and foreign keys consistent with a
set of well chosen integrity constraints, and their FD equivalents. (7)

2. Queries: Develop a collection of queries and/or triggers, addressing userss needs, and
a correct implementation in MySQL. (4)

3. Presentation: Clear, cohesive and complete understanding of the project and be able
to answer questions related to the project (4)

References
[1] Kifer, M., Bernstein, A., and Lewis, P., Database Systems (Introduction
Version),(Second Ed.) Addison-Wesly, Boston, MA, 2005.

[2] Sunderraman, R., Oracle 9i ProgrammingA Primer, Addison-Wesley, Reading, MA,

2004.

10