PRODUCT DATASHEET

AP909014-CT0

Vertical Polarized Antenna, 824-960, 90deg, 15.5/16dBi, 1.9m, FET, 0deg

Dense urban network optimization.

FEATURES / BENEFITS
Power spread on horizon can be tuned easily because of vertical pattern slope.
Accurate C/I level tuning by application of low mechanical tilt will have low visual impact.
Broad bandwidth allows installation on all cellular standards.
Easy to install due to 2 mechanical clamps independent of antenna size.

Technical Features
ELECTRICAL SPECIFICATIONS
Frequency Range MHz 824-894 872-960
Gain dBi (dBd) 15.5 (13.4) 16 (13.9)
Horizontal Beamwidth deg 90
Vertical Beamwidth deg 8.5
Electrical Downtilt Range deg 0
Front-To-Back Ratio dB >25
Polarization Vertical
VSWR < 1.5:1 < 1.3:1
3rd Order IMP @ 2 x 43 dBm dBc >150
Impedance Ohms 50
Maximum Power Input W 1000
MECHANICAL SPECIFICATIONS
Lightning Protection Direct Ground
Connector Type/Location 7-16 DIN Female/Back
Dimensions - HxWxD mm (in) 1977 x 262 x 140 (77.79 x 10.31 x 5.51)
Weight w/o Mtg Hardware kg (lb) 10.9 (23.98)
Weight w/ Mtg Hardware kg (lb) 13.7 (30.1)
Survival/Rated Wind Speed km/h (mph] 200 (125) / 160 (100)
Wind Load @ Rated Wind, Front N (lbf) 1017 (228)
Wind Load @ Rated Wind, Max. N (lbf) 1017 (228)
Wind Load @ Rated Wind, Side N (lbf) 726 (163)
Wind Load @ Rated Wind, Rear N (lbf) 996 (223)
TESTING AND ENVIRONMENTAL
Operation temperature C (F) -40 to 60 (-40 to 140 )
MATERIAL
Radome Material/Color UV Resistant ASA/Light Grey RAL7035
Mounting Hardware Material Diecasted Aluminum
Radiating Element Material Aluminum
Reflector Material Aluminum
ORDERING INFORMATION
Packing Dimensions, HxWxD mm (in) 2115 x 300 x 220 (83.23 x 11.81 x 8.66)
Mounting Hardware APM40-2
Mounting Pipe Diameter mm (in) 60 - 120 (2.36 - 4.72 )
Mounting Hardware Weight kg (lb) 3.4 (7.5)

AP909014-CT0 REV: A1 REV DATE: 05.05.2011 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 1 of 2
PRODUCT DATASHEET
AP909014-CT0

Vertical Polarized Antenna, 824-960, 90deg, 15.5/16dBi, 1.9m, FET, 0deg

Vertical Pattern Horizontal Pattern

External Document Links Notes

AP909014-CT0 REV: A1 REV DATE: 05.05.2011 www.rfsworld.com

All information contained in the present datasheet is subject to confirmation at time of ordering Page 2 of 2