Case Construction 621 State Street

[email protected], Wisconsin 53404

(580SL) - SERIES 2 LOADER BACKHOE - ASN JJG0258464 > (6-050) - CARRARO TRANSMISSION ASSY, SECONDARY SHAFT,
2 OR 4 WHEEL DRIVE, MODELS W/OUT POWERSHIFT TRANSMISSION > RING, LOCKING
 Case Construction 621 State Street
[email protected], Wisconsin 53404
866-542-2736 x1

(580SL) - SERIES 2 LOADER BACKHOE - ASN JJG0258464 > (6-050) - CARRARO TRANSMISSION ASSY, SECONDARY SHAFT,
2 OR 4 WHEEL DRIVE, MODELS W/OUT POWERSHIFT TRANSMISSION > RING, LOCKING
Diag # Part # Name Description Qty
123842A3 TRANSMISSION ASSY., 2WD, new, w/integrated diff. lock 1
solenoid valve, Includes: Ref. 1-35, see
Figs. 6-34-6-58; replaces 123843A2 trans.
which used the chassis mounted diff. lock
solenoid valve, see Fig 6-156, no longer
available, order 329079A1, see Fig. 6-62 -
6-84
See Figure 6-34 for further See Figure 6-34 for further explanation 1
explanation when replacing when replacing an A2 transmission with an
an A2 transmission with an A3 transmission
A3 transmission
123842A3R REMAN-TRANSMISSION 580SL Series 2, Two Wheel Drive, Verify 1
That The Unit Removed From The Tractor
Being Repaired Has A Supplier Part
Number 137373 On It, If Not, Do Not Use
123842A3R As A Replacement
123842A3C CORE-TRANSMISSION Return Number 1
123843A3 TRANSMISSION ASSY., 4WD, new, w/integrated diff. lock 1
solenoid valve, Includes: Ref. 1-35, see
Figs. 6-34-6-60; replaces 123843A2 trans.
which used the chassis mounted diff. lock
solenoid valve, see Fig 6-156,no longer
available, order 329079A1, see Fig. 6-62 -
6-86
See Figure 6-34 for further See Figure 6-34 for further explanation 1
explanation when replacing when replacing an A2 transmission with an
an A2 transmission with an A3 transmission
A3 transmission
123843A3R REMAN-TRANSMISSION 580SL Series-2, 4 WD, Without Powershift 1
Transmission
123843A3C CORE-TRANSMISSION Return Number 1
1 181118A1 RING, LOCKING RING, LOCK 1
2 181132A1 ROLLER BEARING,40 mm ROLLER BEARING,40 mm ID x 80 mm OD 1
ID x 80 mm OD x 18 mm x 18 mm
3 181193A1 THRUST WASHER 64 x 40 mm 1
4 181190A1 PINION GEAR driven, second, 43 teeth 1
5 181114A1 RING, SNAP RING SNAP 6
190427A1 SYNCHRONIZER KIT service, Includes: Refs. 6-15; Included 2
in 256888A3 synchronizer kit
6 244109A1 SPACER gear to synchronizer ring; Included in 4
256888A3 synchronizer kit
7 NSS NOT SERVICED RING synchronizer 2
SEPARATELY
Diag # Part # Name Description Qty
8 NSS NOT SERVICED RING synchronizer, flanged 2
SEPARATELY
9 NSS NOT SERVICED SPACER hub 2
SEPARATELY
10 NSS NOT SERVICED RETAINER spacer 2
SEPARATELY
11 NSS NOT SERVICED HUB synchronizer 1
SEPARATELY
12 NSS NOT SERVICED SPRING hub 3
SEPARATELY
13 NSS NOT SERVICED BALL hub 3
SEPARATELY
14 NSS NOT SERVICED PLATE spring 3
SEPARATELY
15 NSS NOT SERVICED SLEEVE hub 1
SEPARATELY
16 181189A1 PINION GEAR driven, first, 49 teeth 1
17 181226A1 SPACER gear, two wheel drive models 1
18 181224A1 PINION GEAR drive, MFD, 44 teeth 1
19 181192A1 PINION GEAR driven, fourth, 23 teeth 1
26 181108A1 SPLIT PIN roll 1
27 181183A1 SHAFT secondary 1
28 181191A1 PINION GEAR driven, third, 33 teeth 1
29 181154A1 THRUST WASHER 65 x 45 mm 1
30 181130A1 BEARING, BALL,45 mm ID BEARING, BALL,45 mm ID x 106.5 mm 1
x 106.5 mm OD x 25 mm OD x 25 mm
31 181123A1 OIL SEAL 60 x 75 x 8 mm 1
32 233284A1 YOKE Shaft, rear 1
33 181144A1 O-RING,39.6mm ID x flange sealing 1
3.53mm Width
34 181165A1 WASHER flat, special, 52 x 12.5 x 5 mm 1
35 P3533055 SCREW locking, special, 12 - 1.25 x 25 mm 1
256888A3 SYNCHRONIZER KIT, Incl: 190427A1 Kit Ref 6 - 15; plus 1
parts on Figures 6-042, 6-048, 6-050. Also
incl 190436A1 spring, Ref 37 on 6-056.
Also incls (1) 278531A1 washer which is
NSS and not shown.