TC - 1600 SERIES

DATA SCANNER / DATA LOGGER

TC - 1600F / TC - 1600FD TC - 1600F / TC - 1600FD - WP TC - 1600F / TC - 1600FD - FLP

PANEL MOUNT WEATHERPROOF FLAMEPROOF

Remote Area Safe Area / Control Room

MAX 1kmtr MAX 10mtr
CH-1 CH-2 CH-3 ...........................CH-16
RS-485 TO RS-232 / USB
CONVERTER DIRECT PRINTOUT ON
24 / 80 / 132 COLUMN PRINTER

FLAMEPROOF
TC / RTD TEMPERATURE TEMP. / RH PROCESS
SENSOR TRANSMITTER TRANSMITTER TRANSMITTER

WINLOG / DATALOG /
SMARTLOG SOFTWARE
16 / 32 Digital output with grouping facility for alarm and control application

Used latest micro controller based technology for better accuracy ?

? ISO Certification records, Validation process certifying
16 Channel fixed input for all thermocouple, J, K, R, S, T, E, B, N
? Pharmaceutical process validation with graph & excel report in Autoclaves
?
programmable by users, and Fixed Inputs for RTD (PT-100/CU53),
Online profile recording for Oven & BOD, Incubator, Humidity Chamber
?
4-20mA, 0 - 10 VDC factory settable
Easy on-line field calibration by front panel membrane keypad
?
Winding temperature of generators, Bearings, motors, transformers
?

Field programmable channel scan time 1 to 59 sec.,

? To know heat Profile in furnace, foundries for Heat treatment application
?
Logging interval 1 to 9999 sec & Printing Interval 5 to 9999 sec. Pr imary & auxiliary temperature scanning of boiler
?
Field programmable Delay time 1 to 99 sec. for Relay Output
? Chemical & Hazardous area where data monitoring is essential
?
Optional RS-232 / RS-485 Modbus Serial Port
?
Room Mapping in Pharmaceutical
?
Optional Parallel / USB Printing Port
?

MUST FOR YOUR PROCESS

 RANGE RESOLUTION ACCURACY
INPUTS
Minimum Maximum NORMAL FULL SCALE
o
RTD PT-100 (3 WIRE) - 200 C 400.0ºC 0.1 ± 0.25%
RTD (Cu-53) - 50.0ºC 150.0ºC 0.1 ± 0.25%
J - Type ( Fe - CON ) - 50.0ºC 600.0ºC 0.1 ± 0.25%
K - Type ( Cr - Al ) - 50.0ºC 500.0ºC 0.1 ± 0.25%
K - Type ( Cr - Al ) - 100ºC 1300ºC 1 ± 0.25%
R-Type (PT - 13%Rh / PT), S-Type (PT - 13%Rh / PT) 0ºC 1750ºC 1 ± 0.25%
T - Type ( Cu / CON ) - 200ºC 400.0ºC 0.1 ± 0.25%
N-Type, E-Type (Cr / CON) 0ºC 1300ºC 1 ± 0.25%
B-Type ( PT 6% Rh / PT 30% Rh ) 400ºC 1820ºC 1 ± 0.25%
4 To 20mA / 0 To 20mA - 9999 15000 Programmable ± 0.25%
Voltage (0 To 1 VDC / 0 To 10 VDC) - 9999 15000 By user ± 0.25%
Display 5 digits of 13 mm Height Red L.E.D display for ‘Process Value’ indication
2 digit of 13 mm Height Red L.E.D display for ‘Channel Number’ indication
L.E.D. Indication 32 Nos Red L.E.Ds of 3 mm for Alarm Indications AL1 & AL 2 Individual for each channel
Set Point 2 independent set points for each channel with 4 common relay outputs &
programmable latch / non-latch facility for 4 common relays & Alarm indications
Control action HI - LO, LO - Very LO, HI-Very HI; programmable by user
Relay Output 1 NO/C/NC Relay Contact Rated 230VAC/5A for four Relay
Setting Setting by 8 keys on front panel ‘MODE’, ‘SHIFT’, ‘INC’, ‘ENT’, ‘PRN’, ‘ACK’, ‘ESC’, ‘HOLD’
Scan Time 1 to 59 sec scan/scroll time between each channel; programmable by user
Print Interval (Optional) 5 to 9999 Sec for Direct print out on 24 / 80 / 132 Column Dot matrix Printer
Logging Interval 1 to 9999 Sec loggin interval in data logger model; programmable by user
Memory Max. 3000 readings storing capacity for all 16 channel in Data Logger model
Memory saturation, Memory Scrolling (FIFO) & Online PC Interface available in Data Logger model
Monitoring: Sensor Temperature sensor ‘Break / Open’ display shows ‘oPEn’ indication
Open / Under / Over Under range ‘undr’. Over range ‘OuEr’ indication for RTD & all Thermocouple I/Ps
Supply Voltage 230 VAC ±10%, OR 110 VAC ±10% OR 24 VDC OR 12 VDC
o
Operating Temperature - 40 To 85 C Relative Humidity : Below 95% non condensing
Enclosure Details Panel Mount Weatherproof Flameproof
Protection Class IP-40 IP-65 IP-65, CMRI for IIA & IIB Gas Group
Cabinet Material MS, Aluminium powder coated Polycarbonate, gray colour Cast Aluminum alloy, LM-6 / C.I. Enclosure
Cable Entry Terminal Connector for Connection Thermoplastic cable gland (IP 68) Double compression cable gland, ¾” ET-type
Dimension 192(H) X 96(W) X 200(D) in mm 305(H) X 325(W) X 170(D) in mm 450(H) X 390(W) X 170(D) in mm
Cutout 188(H) X 92(W) in mm ---- ----
Mounting Panel Mount Wall Mounting / Stand Mounting Wall Mounting / Stand Mounting
Weight Approx 1.5Kg Approx 3.5Kg Approx 15Kg
Optional a) Isolated RS-232 / RS-485 Serial Port with MODBUS RTU Protocol output.
b) Isolated Parallel port for direct printout on 24/80/132 column Dot Matrix printer without need of Computer (PC)
c) SMARTLOG / DATALOG / SCADA Data Acquisition Softwares for online graphs & history data reports
d) Individual Relay output or Grouping Relay output can be given for each channel
ORDERING INFORMATION
TC A B C D E F G H
A) B) Enclosure C) Input Type D) Relay Output H) Power Supply E) Communication G) PC Based F) PC Interface
Specifications subject to change without any prior notice

1)1600F - Scanner 1) Panel Mount 1) PT-100 (3Wire) 1) None 1) 230 VAC, 50Hz Port Software 1) RS-485 to RS-232
2)1600FD - Logger 2) WP-3500 2) Thermocouples 2) 4 Common Relay 2) 110 VAC, 50Hz 1) RS-232 Serial Port 1) None Converter
(Weatherproof) (J,K,R,S,T,E,B,N) 3) 16 Relay 3) 24 VDC 2) RS-485 Serial Port 2) Datalog Software 2) RS-485 to USB
3) FLP-011 3) 4 to 20mA 4) 32 Relay 4) 12 VDC 3) Centronix Parallel 3) Smartlog Software Converter
(Flameproof) 4) 0-10 VDC Port 4) Winlog/Scada
5) Multiple Inputs Software
(Please Specify with
Channel No.)
NOTE : For any customize requirement contact factory

Ambetronics Engineers Pvt. Ltd. DEALERS :

17-B, Tarun Industrial Estate, Mogra Pada, New Nagardas Road,
Andheri (East), Mumbai-400069, India.
Tel. : +91-22-66995525, 28371143, Fax : +91-22-28226570
Mob. : 09324571143, Website: www.ambetronics.com
E-mail : [email protected], [email protected] AEPL / VER 1.0 / 121208 / 2K