Scribd
Upload
217 views

CCM08 Guide

1. The document describes the steps to connect a BACnet gateway (CCM08) to central controllers, indoor/outdoor units, and a PC. It involves wiring the units, modifying IP addresses, and connecting to the gateway's web interface. 2. Key details include connecting the gateway's 4 RS485 ports to up to 64 indoor units or 8 refrigerant systems, modifying the PC's IP to access the gateway, and changing the gateway's IP to integrate it onto an existing local area network (LAN). 3. Additionally, the gateway can be used with third-party network software by configuring the software and gateway IP addresses and ports to discover and monitor connected devices over the LAN.

Uploaded by

elshan_asgarov
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
217 views

CCM08 Guide

1. The document describes the steps to connect a BACnet gateway (CCM08) to central controllers, indoor/outdoor units, and a PC. It involves wiring the units, modifying IP addresses, and connecting to the gateway's web interface. 2. Key details include connecting the gateway's 4 RS485 ports to up to 64 indoor units or 8 refrigerant systems, modifying the PC's IP to access the gateway, and changing the gateway's IP to integrate it onto an existing local area network (LAN). 3. Additionally, the gateway can be used with third-party network software by configuring the software and gateway IP addresses and ports to discover and monitor connected devices over the LAN.

Uploaded by

elshan_asgarov
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

1 BACnet Gateway---CCM08

Step1: Wiring with Central controller and indoor/outdoor units

Refrigerant System: V3V4D3D4

RS485 indoor units


Max.64 IDUs

CCM03 controller

RS485 indoor units


Max.8 refrigerant
systems

CCM02 controller
Refrigerant System: Full V4+

indoor units
MAX:64 indoor units

CCM03

MAX:8 systems
CCM02
indoor units
Step2: Wiring with gateway and central controllers

Useful port, Connect to PC

4*Port RS485,
Port reserved, each port
No useful connect one
CCM(indoor or
outdoor) and
corresponding
indoor or
outdoor units

Each gateway has a initial IP address, this one


is:192.168.208.231,Pls keep it
Power
Socket

Power
Switch
Take a PC, Connect to gateway

Ex. In this case, CCM08 connect one CCM03 and 8 IDUs


Step3: Modify IP address of PC to connect gateway

Modify the PC ip
address
to:192.168.208.232
under the same
address range
with CCM08.
Turn on IEinput 192.168.208.231 in the address bar

Initial user nameadmin


Initial PW 12345
After that, the web control interface appeared

In the web control interface, we can control and monitor the A/C
Step4: Connect the gateway to LAN

Firstly, Check the IP address of existed LAN

IP address of this PC is:


10.46.1.49, pls keep it
Next, Change the ip address of CCM08

Cannot choose
this item !!!

No useful, Dont
care about it

Change the ip address under the same address range. Pls ask
the IT administrator which ip address is available. In this case,
ip address of CCM08 have been changed to 10.46.1.2
After modified, Click Rebotbotton
Connect CCM08 to LAN by Hub
On any PC of LAN, input 10.46.1.2 on IE address bar, get
into the web control interface, So CCM08 has been
connected to LAN.
Additional: CCM08 cooperate with 3rd network software

Ex. In this case, IP address of PC is 10.46.1.253, ip address of


CCM08 is 10.46.1.251. There are 10 IDUs(Network address range:
(0054~0063), 1 ODU(Network address: 1800)

Turn on ACServer
1.This is PC ip address 2.In any case,
here have to be
19781
3.This is CCM08 ip
address range.
Max.256 CCM08 can 4.In any case,
be connected to LAN here have to be
19780

6.All existed CCM08 will 5.Finish all


be found. In this case, setting above,
only one. Click Scan
After configuration, Searching the
devices

After search, back to software


main interface

You might also like