Kinetics of Microbial Inactivation for

Alternative Food Processing Technologies

A Report of the Institute of Food Technologists

for the Food and Drug Administration

of the U.S. Department of Health and Human Services

submitted March 29, 2000

revised June 2, 2000

IFT/FDA Contract No. 223-98-2333

Task Order 1

This document contains the Kinetics of Microbial Inactivation for Alternative Food Processing

Technologies report, revised June 2, 2000, as published in the Journal of Food Science,

Volume 65, Issue Supplement s8, in November 2000.

 Table of Contents

Preface ................................................................................................................................. 4

Science Advisory Board ....................................................................................................... 4

Scientific and Technical Panel and Subpanels ..................................................................... 4

Reviewers............................................................................................................................. 5

Additional Acknowledgements.............................................................................................. 5

Background .......................................................................................................................... 6

Scope of Work ...................................................................................................................... 7

Executive Summary.............................................................................................................. 8

Overarching Principles: Kinetics and Pathogens of Concern ............................................. 16

for All Technologies

Microwave and Radio Frequency Processing..................................................................... 32

Ohmic and Inductive Heating.............................................................................................. 42

High Pressure Processing .................................................................................................. 47

Pulsed Electric Fields ......................................................................................................... 65

High Voltage Arc Discharge ............................................................................................... 80

Pulsed Light Technology .................................................................................................... 82

Oscillating Magnetic Fields ................................................................................................. 86

Ultraviolet Light................................................................................................................... 90

Ultrasound .......................................................................................................................... 93

Pulsed X-rays ..................................................................................................................... 96

Research Needs................................................................................................................. 98

Glossary ........................................................................................................................... 100

References ....................................................................................................................... 103

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies

Preface

NSEPT. 30, 1998, THE FOOD AND DRUG ADMINISTRATION panel was comprised of experts in food microbiology and food en
O (FDA) of the U.S. Department of Health and Human Servic
es signed a five-year contract with the Institute of Food Technol
gineering: specifically, experts in the alternative technologies un
der review. The panel and subpanels met in person and via con
ogists (IFT) for IFT to provide scientific review and analysisof is ference calls throughout 1999 and early 2000. IFT also assembled
sues in food safety, food processing and human health. Under a Science Advisory Board to advise IFT on the FDA contract and
the terms of the contract, FDA assigns IFT task orders, catego on the individual task orders.
rized as comprehensive or abbreviated reviews. IFT assembles The Institute of Food Technologists greatly appreciates the ef
Scientific and Technical Panels comprised of experts in the topic forts of the Scientific and Technical Panel and Subpanels, the Sci
area to address the issues. The panels are charged with provid ence Advisory Board, the many reviewers, staff and others who
ing scientific and technical review and analysis, not with setting made this report possible. Compensation for such an effort pales
policy. in comparison to the time, effort, and expertise expended.
This report is IFT's response to Task Order #1: How to Quanti IFT is especially grateful to the FDA staff for their tremendous
fy the Destruction Kinetics of Alternative Processing Technolo cooperation, communication, and assistance at every stage of
gies. The Background and Scope of Work that FDA provided to this project. IFT submits this report to the agency in the hopes
IFT are included. In October 1998, IFT assembled a Scientific that the report makes a modest contribution to the understand
and Technical Panel and three subpanels: Electromagnetic Pro ing of the many exciting, emerging, alternative technologies that
cesses, Electrothermal Processes, and Physical Processes. Each have potential for enhancing the safety and quality of food.

Science Advisory Board

Roy G. Arnold, Ph.D. G. Edward Schuh, Ph.D. Jozef L. Kokini, Ph.D.

Provost Freeman Chair Professor Rutgers, The State University of New Jer

College of Agricultural Science Hubert H. Humphrey Institute of Public sey

Oregon State University Affairs

University of Minnesota Irving J. Pflug, Ph.D.

Lester M. Crawford, Ph.D., D.V.M University of Minnesota

Director Barbara 0. Schneeman, Ph.D.

Center for Food and Nutrition Policy Assistant Administrator Merle D. Pierson, Ph.D.

Georgetown University U.S. Dept. of Agriculture Virginia Polytechnic Institute and State

Agricultural Research Service/Human Nu University

Ray A. Goldberg trition

George M. Moffett Professor of Agriculture Electromagnetic Processes
and Business Thomas N. Urban, Jr.
Emeritus Retired CEO
Subpanel
Harvard Business School Pioneer Hi-Bred International
Gustavo V. Barbosa-Canovas, Ph.D.

Marcus Karel, Ph.D. Washington State University

Institute of Food Technologists

Professor Emeritus
Massachusetts Institute of Technology and Merle D. Pierson, Ph.D.

Rutgers University Scientific and Technical Panel Virginia Polytechnic Institute and State

on Alternative Processing University

Sanford A. Miller, Ph.D. Technologies

Professor and Dean Donald W. Schaffner, Ph.D.

Graduate School of Biomedical Sciences Panel Chair and Senior Science Advisor to
Rutgers, The State University of New Jer

University of Texas Health Science Center the Institute of Food Technologists:

sey

Frank F. Busta, Ph.D.

Martha Rhodes Roberts, Ph.D. University of Minnesota

Q. Howard Zhang, Ph.D.
Deputy Commissioner for Food Safety Ohio State University
Dept. of Agriculture & Consumer Services Ashim K. Datta, Ph.D.

State of Florida Cornell University

Electrothermal Processes Subpanel
Jeffrey T. Barach, Ph.D.

National Food Processors Association

4 JOURNAL. Of' FOOD SCIENCE-Supplement

Ashim K. Datta, Ph.D. Lynne A. McLandsborough, Ph.D. K.P. Sandeep
Cornell University University of Massachusetts North Carolina State University
P. Michael Davidson, Ph.D. Thomas Montville, Ph.D.
Juming Tang
University of Tennessee Rutgers, The State University of New Jer
Washington State University
sey

Dennis R. Heldman, Ph.D. Irwin Taub

Heldman and Associates Elsa Murano, Ph.D.
U.S. Army Natick Soldier Center
Texas A&M University

Sudhir K. Sastry, Ph.D. Rudy Tops

Ohio State University Margaret F. Patterson, Ph.D.
Tops Foods
The Queen's University of Belfast

Physical Processes Subpanel RandyWorobo, Ph.D.

M. Anandha Rao, Ph.D. Cornell University
Daniel F. Farkas, Ph.D.
Cornell University
Oregon State University
Tom Yang
Bibek Ray, Ph.D.
U.S. Army Natick Soldier Center
Dallas G. Hoover, Ph.D.
University of Wyoming

University of Delaware
Food and Drug Administration
Walter J. Sarjeant, Ph.D.

Jozef L. Kokini, Ph.D.

State University of New York at Buffalo
Donald M. Kautter, Jr.
Rutgers, The State University of New Jer
Contract Technical Officer
sey
Charles E. Sizer, Ph.D.
Division of HACCP Programs
Illinois Institute of Technology

Reviewers John W. Larkin, Ph.D.

John N. Sofos, Ph.D.
Food Process Hazard Analysis Branch
Colorado State University

Garry R. Acuff, Ph.D.

Texas A&M University Stephen Spinak
Randy William Worobo, Ph.D.
Division of HACCP Programs
Cornell University

Douglas L. Archer, Ph.D.

University of Florida Ed Arnold
Ahmed E. Yousef, Ph.D.
Contracting Officer
Ohio State University

V. M. Balasubramaniam, Ph.D.
Illinois Institute of Technology Institute of Food Technologists
Additional Acknowledgements
Martin Cole, Ph.D. Bruce R. Stillings, Ph.D.
Food Science Australia R. C. Swamy Anantheswaran 1998-1999 President
The Pennsylvania State University
C. Patrick Dunne, Ph.D. Charles E. Manley, Ph.D.
U.S. Army Natick Soldier Center Hisayoshi Akiyama 1999-2000 President
Otsuka Chemical Co., Ltd.
Edward B. Goldman, Ph.D.
Mary K. Schmid!, Ph.D.
Systems Technology Analysis Inc.
Mario Bassani 2000-2001 President
Micromac
Marc E. G. Hendrickx, Ph.D.
Daniel E. Weber
Katholieke Universiteit Leuven
Juan Jose Fernandez-Molina Executive Vice President
Washington State University
Fu-Hung Hsieh, Ph.D.
Fred R. Shank, Ph.D.
University of Missouri
Susan Fredenberg Vice President, Science, Communications
Cornell University and Government Relations
Marcus Karel, Ph.D.

Massachusetts Institute of Technology

Phil Hartman Ellen J. Sullivan
and Rutgers University
FPE Inc. Director, Department of Science and Tech
nology Projects
Larry Keener, Ph.D.
Theodore P. Labuza, Ph.D.
International Product Safety Consultants
University of Minnesota Maria P. Oria, Ph.D.
Staff Scientist
Derrick Kilsby, Ph.D.
Rosetta Newsome, Ph.D.
Unilever
Institute of Food Technologists Jerry W. Lewis
Information Specialist
Dietrich Knorr, Ph.D.
H. S. Ramaswamy
Berlin University of Technology
McGill University Eva F. Lopez
Administrative Assistant

Supplement-JOURNAL OF FOOD SCIENCE 5

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for 1'lternatlve Food Proce55lng Technologies

Background

PROVIDED BY THE FOOD AND DRUG ADMINISTRATION TO THE INSTITUTE OF FOOD TECHNOLOGISTS

T HERMAL TREATMENT OF FOOD PRODUCTS TO RENDER THEM

free of pathogenic microorganisms has been practiced for
more than five thousand years. However, a method by which to
used to establish the amount of microbial destruction that takes
place during a process. In the event that temperature can be nei
ther modeled nor physically measured, microbial destruction of
quantify the microbial destruction that takes place during a ther a process can be physically measured by inoculating a portion of
mal treatment has only been understood for the last 75 years. To the product with a known amount of an indicator organism and
determine the amount of microbial destruction that a thermal then measuring the number of organisms that remain in the
treatment delivers to a process requires both an understanding of food portion after the process. This procedure is often referred to
the amount of heat delivered to every portion of the food product as a biological challenge, or an inoculated pack test.
and the destruction kinetics of the microorganisms of interest. When performing a biological challenge test the indicator or
The amount of heat delivered by a food process is dependent ganism needs to be chosen carefully. For transient heat conduc
on the way in which the product is heated and on its physical na tion processes (i.e., temperature of the cold spot changes with
ture. Process dependent factors can include: processing equip time) the change in destruction rate with temperature (z-value)
ment design, type of heating media, container, or food size and must be the same as that of the pathogen of concern. An indica
shape, product composition and viscosity. The thermal destruc tor organism with a differing z value from the pathogen of con
tion kinetics of microorganisms or their ability to be killed within cern can be used if the z value is conservative; however, calcula
the food matrix is likewise dependent on a number of factors. tion errors can easily be overlooked and thus, this is not a recom
These factors may include: pH of the product, levels and types of mended procedure. For transient heat conduction processes, the
preservatives, water activity, the previous growth conditions of the amount of destruction that is measured for a specific indicator
microorganisms of concern, product composition, and competitive organism cannot be mathematically adjusted for a differing z
microorganisms. Heat transfer mechanics can be used to develop value of the pathogen of concern without the actual time-tem
mathematical relationships between the rate at which a food is perature profile of the process, that being measured by the bio
heated and the temperature of the coldest portion of the food. logical challenge study. Besides an appropriate z-value, the de
Models have been developed for a large portion of the different struction rate of the indicator organism needs to be characterized
types of food processing systems currently used. However, not all for the substrate being processed. For a biological challenge test
food processing systems are easily modeled. In similar fashion, an accurate understanding of the indicator organism's D and z
mathematical relationships have been developed to describe the values within the food matrix must be known. Additionally, this
kinetics of thermal destruction of microorganisms. Thermal de information needs to be current. Kinetic parameters for crops of
struction of microorganisms tends to follow first order rate reaction biological indicator organisms can change with storage.
kinetics and have traditionally been described by the rate, at a When an indicator organism is used for validation tests where
specific temperature, required to reduce a population of organ the target process is a specific number of log reductions in the or
isms by 90%. This value is referred to as the D value, or decimal re ganism, how the indicator organism is grown may be important.
duction time value. The change in D value with temperature also Destruction kinetics can change with growth conditions. For ex
follows a first order relationship. The temperature increase re ample, for chemical (hydrogen peroxide) sterilization validation
quired to reduce a microorganism's D value by 90% is referred to as tests of aseptic equipment, the indicator organism is typically
the z value. For thermal processes, understanding a microorgan Bacillus subtilis A with a known resistance to hydrogen peroxide.
ism's D and z values allows a processor to measure the amount of The destruction ofthe organism during the process is then mea
microbial destruction delivered by the process. Other processing sured to validate the process. If indicator organisms with inappro
treatments (i.e., high pressure processing, pulsed electric field, priate chemical resistance to hydrogen peroxide are used during
chemical treatments, irradiation, and pulsed light) may require the validation test, the system will have been underchallenged.
other processing or constitutive parameters in order to be able to For milk products and low-acid canned foods, the food indus
establish the amount of destruction that takes place during a pro try has agreed on the organisms of public health concern when
cess. For example, chemical sterilization processes (i.e., hydrogen thermally processing. When alternative processing technologies
peroxide and ethylene oxide) require a measurement of time, are used to destroy microorganisms, these same organisms may
temperature and chemical concentration. Often chemical concen no longer be the appropriate organism(s) of concern. New alter
tration is monitored and held constant at or above a known critical native processing technologies may involve different mecha
limit. For high pressure processing, time, temperature, and pres nisms for microbial destruction, which may mean that traditional
sure determine the rate of microbial destruction. Some research thermal destruction kinetics may not be useful in characterizing
ers have proposed using a zP to describe the effect a change in a new technology system.
pressure has on the process.
For a number of thermal processing systems, the total num Current Policy
ber of microorganisms destroyed by the process can be estimat The thermal treatment delivered to refrigerated bovine milk
ed by incorporating the destruction rate kinetics of the microor (pasteurized milk) and its products is based on a D 140p and a 12
ganism of concern into the heat transfer model for that system. log reduction of Coxiella burnetti. The U.S. Code of the Federal
In cases where the temperature of a product cannot be accurate Regulations (CFR) for milk (21 CFR 131.3 and 21 CFR 1240.61)
ly modeled, actual time-temperature measurements can be stipulate the minimum time and temperatures required when

6 JOURN1'L Of' FOOD SCIENCE-Supplement

pasteurizing milk and its products. This regulation defines both and 114) require a scheduled thermal treatment sufficient to
the meaning of pasteurization and ultra-pasteurization for milk render the food product commercially sterile at normal stor
products, as an equivalent time and temperature treatment. A age, temperatures. Commercially sterile is defined in 21 CFR
processor must process milk at these minimums, or higher, in or 113.3 as a treatment necessary to render the food product free
der to sell them in interstate commerce. Since 1924 the FDA, in of viable microorganisms having public health significance, as
cooperation with those involved with milk manufacturing, state well as microorganisms of nonhealth significance, capable of
and local regulators, and educational and research institutions, reproducing in the food under normal nonrefrigerated condi
has developed the Grade A Pasteurized Milk Ordinance (PMO). tions of storage and distribution.@ For a process that deviates
The Grade A PMO is-a recommended ordinance for adoption by from the scheduled process the food product must be shown
States, counties, and municipalities in order to encourage a uni to be free of only microorganisms of public health significance
form milk sanitation program within the U.S. The ordinance cov (i.e., Clostridium botulinum spores). The low-acid canned food
ers the complete production of milk and milk products, from the industry has traditionally used a 12 log (i.e., a 12 D treatment)
farm to consumer purchase. The PMO uses the same definitions reduction in Clostridium botulinum spores as a target thermal
for pasteurization as are defined in the CFR. treatment necessary to render the food product free of any po
In Part II, Section l(S) of the PMO and in 21 CFR 1240.61 tential public health hazard. The thermal treatment necessary
the definition for pasteurization includes a provision for treat to render a food product commercially sterile is typically more
ments other than time-temperature treatments. In order for a than that required to deliver a 12 log reduction in Clostridium
processor to be able to use anything other than a time-tem botulinum. It is the processor's responsibility to develop the
perature thermal treatment on milk products, the FDA must time-temperature treatment necessary to produce a commer
approve the alternative process as equally effective. cially sterile low-acid canned food product.
The regulations for low-acid canned foods (21 CFR 108, 113

Scope of Work

AS ASSIGNED BY TIIE FOOD AND DRUG ADMINISTRATION TO TIIE INSTITUTE OF FOOD TECHNOLOGISTS

genie organisms associated with specific foods, processing condi

T HE INSTITUTE OF FOOD TECHNOLOGISTS SHALL REVIEW THE
scientific literature, shall consult with academic experts, and
shall consider the requirements of other governmental bodies to
tions, storage conditions and potential storage abuse.
3. IFT shall review various options on how to quantify the le
address the following specific questions: thal efficacy (destruction kinetics) of the process. The agency is
1. What alternative processing technologies might be used to interested in how to determine the effectiveness of an alterna
produce food products free from any public health hazard and tive processing technology. What type of method should be used
what are their critical control points? IFT shall provide information to express the destruction rate of an alternative technology pro
about the different types of alternative processing technologies cess, mathematical model and/or a biological challenge test and
that might be used for both pasteurization and sterilization type why? For thermal treatments the amount oflethal treatment that
processing. These technologies would include but are not limited is delivered by a process can be determined from an under
to: high pressure processing, pulsed electric field, pulsed x-ray or standing of the time-temperature history of the process and the
ultraviolet light, ohmic heating, inductive heating, pulsed light, D and z value of the organism of concern. If there is a mathemati
combined ultraviolet light, and low-concentration hydrogen per cal relationship for the microbial destruction rate of the alterna
oxide, submegahertz ultrasound, filtration, oscillating magnetic tive processing technology, what are the parameters to the model
fields and any other technology which may serve as an alternative and how is the model used? The agency seeks guidance on how
to traditional thermal processes. IFT shall do an in-depth review of to develop a model for alternative process technologies where
how these alternative technologies work and what critical control mathematical models do not exist.
points are important to each of them. IFT shall provide definitions 4. IFT shall review which indicator organism(s) can be used to
of the process technology. For example, is there a standard defini validate the alternative technology process(es). A properly de
tion for "pasteurization" that can be used for each alternative pro signed process requires that the process be validated. If there is
cessing technology, or should new terms be developed (i.e., cold sufficient understanding as to the kinetics associated with the
pasteurization for high pressure processing)? process, can physical measurements of the process delivery be
2. IFT shall do an in-depth review on which organism(s) of used to validate the process and how could this be accom
public health concern is the most resistant to the process(es). plished? Indicator organisms will also be used to validate mathe
The agency understands that the mechanism of microbial de matical relationships that have been proposed for a process.
struction for an alternative processing technology may not follow What are appropriate indicator organism(s) for each of the math
that of traditional thermal processing. Thus, the organism of ematical relationships proposed for a process or how to go about
public health significance that is the most resistant for each of selecting one.
the alternative processing technologies may be different from 5. IFT shall review how process deviations are to be handled.
that established for traditional thermal processing. The agency For all processes, there will be times when the process, as vali
seeks guidance as to how to determine the most resistant organ dated, was not delivered to the product. For each alternative
ism of concern and its variation in resistance that might occur processing technology, IFT shall provide a sample process devi
within nature. This might involve a number of factors, which may ation, examine and review it, and state possible way(s) as to
include but are not limited to: growth phase and growth condi how FDA might determine the severity of the deviation with re
tions of organism, processing substrate or food matrix, the patho gards to public health.

Supplement-JOURNAL OP FOOD 9C1BHCB 7

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Executive Summary

T HIS REPORT EVALUATES THE SCIENTIFIC INFORMATION AVAIL

able on a variety of alternative food processing technologies.
The purpose of the report is to help the Food and Drug Adminis
port alternative needs, first-order kinetics were used.
Kinetic parameters for microbial populations exposed to ther
mal treatments have been assembled over a significant period of
tration evaluate each technology's effectiveness in reducing and time. Published literature has included kinetic parameters need
inactivating pathogens of public health concern. Where informa ed to respond to most process, product, and microbial situations.
tion is too limited for a thorough evaluation and conclusion, re Thermal parameters provide a sound basis for development of
search needs are identified. processes for the microwave energy and electrical resistance
The report begins with a discussion of overarching principles (ohmic) technologies.
that apply to all of the technologies, specifically focusing on ki There are limitations to interpreting these parameters. Care
netic parameters and pathogens of public health concern. Kinet should be taken when the parameters are used to develop pro
ic parameters and models are used to compare the rates of micro cesses, to compare the resistance of different microbial popula
bial inactivation for each technology. Limitations of the parame tions, or to identify appropriate microorganisms.
ters are discussed at length. Pathogens of concern for all the Data used to determine the D-value and/or k for pressure
technologies are also addressed. treatment of microbial populations appear useful. Identifying
The report then provides a detailed review and analysis of the the key pathogens of concern and their surrogates continue to be
alternative technologies. For each technology, FDA asked the an ongoing challenge. Limitations of these data are primarily as
panel to define the technologies, identify pathogens of public sociated with temperature control or temperature changes dur
health concern most resistant to the technology, describe the ing the pressure treatments. Evidence suggesting a synergistic
mechanisms of pathogen inactivation and their kinetics, identify impact of pressure and temperature on microbial populations is
ways to validate the effectiveness of microbial inactivation, iden too limited for use. Much of the data were collected at a single
tify critical process factors, and describe process deviations and pressure. Only 4 studies have used 3 to 5 pressure levels, while
ways to handle them. The panel also provides a description of controlling all other factors affecting the parameters.
synergistic effects between technologies, where available, and Data available on the influence of PEP on microbial popula
articulates research needs for each technology. tions have many limitations. The kinetic parameters are based
on 2 points on the survivor curve. No single report has measured
Overarching Principles the inactivation of microbial populations at several levels of elec
tric field strength, leading to the quantification of the PEP coeffi
Kinetics cient, nor has the synergistic influence of temperature been
Kinetic parameters and models are used for the development quantified.
of food preservation processes to ensure safety. They also permit Electrothermal alternative technologies utilize the well-estab
comparison of different process technologies on reduction of mi lished thermal kinetic parameters for thermal inactivation of
crobial populations. The parameters, with their recognized limi vegetative cells of Salmonella, Escherichia coli, Yersinia entero
tations, are used to analyze and report the reduction of a micro colitica, Vibrio spp., Aeromonas hydrophila, Campylobacter jejuni,
bial population as a function of process parameters and include Listeria monocytogenes and Staphylococcus aureus. In general, the
empirical coefficients experimentally determined from microbial thermal resistance constants z(T) for the vegetative microorgan
reduction kinetics. The models and kinetic parameters are used isms fall between 4 and 7.7 C. The largest D-value (smallest k
to present and compare microbial inactivation data from ther value) reported at 110 c for toxin-producing, sporeforming mi
mal, pressure, and electromagnetic processes. The parameters croorganisms is 12.42 min (0.185/min) for Clostridium botulinum
(D-value and z(T), z(P), z(E), E, k, Kand V) have been calculated proteolytic Type B spores at 110 c in pureed peas.
from data previously reported, using the models for thermal, An independent additional inactivation mechanism due to the
pressure, and pulse electric field (PEP) technologies. The ther electric current during ohmic heating may occur, but at this time ev
mal parameters apply to microwave energy and electrical resis idence is not sufficient to consider the use of alternate kinetic pa
tance (ohmic) processes, as well as any other technology where rameters for development of ohmic heating processes. The non
temperature is the primary factor. The parameters for pressure or thermal effects of microwave processes on microbial inactivation
PEF treatments should apply to any process where pressure or have not been confirmed and appear insufficient in magnitude to
electricity is the primary critical factor in reducing microbial pop be considered during development of processes. For processes in
ulations. Given the scarcity of data, these are estimated parame volving the use of pressure for reduction of microbial populations,
ters and there is an imminent need for more research in this area. the F-value is the time the product needs to be exposed to the
The quantity of data for several of the other technologies, de specified pressure and other conditions (that is, temperature) to
scribing the influence of the treatment on reduction of microbial accomplish the recommended amount of inactivation.
populations, is insufficient for a comparison. The combined influence of pressure and temperature on in
The basic model assumes a linear first-order relationship be activation kinetics has been investigated on only a limited basis.
tween microbial population and time. There are considerable Pressure appears to significantly inactivate S. aureus. However,
discussions about the appropriateness of using a first-order in comparable experiments, inactivation rates of selected strains
model to describe the reduction in microbial population for all of various Listeria spp. with, for example, D-values ranging from
preservation technologies, but without strong evidence to sup 1.48 min (k = 1.556/min) at 350 MPa to 15 min (k = 0.154/min) at

8 JOURNAL. OP POOD 8CIEHCE-Supplement

xecutlve Summary ...
400 MPa were lower than the ones for S. aureus. These data were Y. enterocolitica. The primary virus of concern that is carried by
measured at ambient temperatures (20 to 25 CJ. foods is Hepatitis A. Cryptosporidium and Cyclospora are protozoa
Comprehensive data on inactivation rates of Clostridium of concern mainly because they produce resistant cysts. When
sporogenes spores show the influence of pressure on inactivation exploring the new preservation technologies, their preservation
rate, z(P), to be 725 MPa at 93 C, 962 MPa at 100 C and 752 MPa level should be compared to that of classical pasteurization or
at 108 C. Data for C. botulinum Type E Alaska and Type E Beluga commercial sterilization technologies.
indicate that their D-values were in the same range as C. sporo Establishment of traditional thermal processes for foods has
genes. The D-values for C. botulinum Type A 62-A are generally been based on 2 main factors: 1) knowledge of the thermal inac
higher than the values for C. sporogenes, even when considering tivation kinetics of the most heat-resistant pathogen of concern
the influence of temperature and pressure. In another study, for each specific food product, and 2) determination of the na
high-pressure resistance was reported for L. monocytogenes and ture of heat transfer properties of the food system. Validity of the
S. aureus. The most pressure-resistant pathogenic vegetative cell established process is often confirmed using an inoculated test
populations appear to be those of E.coli 0157:H7 with a D-value pack study tested under actual plant conditions using surrogate
of6 min (k = 0.384/min) at 600 MPa, and S. aureuswith aD-value microorganisms as biological indicators that can mimic the
of7.14 min (k = 0.323/min) at 600 MPa. The most resistant pres pathogen. Thus, the 2 factors described above, which are well es
sure spores appear to be C. sporogenes with a D-value of 16.772 tablished for thermal processes, should be used for establishing
min (k = 0.138/min) at 600Mpa (T = 90 CJ and C. botulinum and validating scheduled electrothermal processes.
Type A 62-A with a D-value of 6.7 min (k = 0.344/min) at 827 MPa For other preservation processes not based on heat inactiva
(T = 75 CJ. The pressure coefficient z(P) of 1524 MPa for C. botu tion, key pathogens of concern and nonpathogenic surrogates
linum Type A 62-A constitutes an additional indication of the need to be identified and their significance evaluated. Surro
pressure resistance of the spore populations. A recent report gates are selected from the population of well-known organisms
shows little if any inactivation after 30 min of C. botulinum l 7B that have well-defined characteristics and a long history of being
and Cap 9B exposure to 827 MPa at 75 C. nonpathogenic. Surrogates need to be nonpathogenic organisms
Adequate inactivation data for estimating the kinetic parame and not susceptible to injury, with nonreversible thermal or other
ters for microbial populations exposed to PEF are scarce but in a inactivation characteristics that can be used to predict those of
form that fits the basic model. Even with major limitations, the the target organism. The durability to food and processing pa
models could be used to establish process time (Fl in the short rameters should be similar to the target organism. Population of
term, but a great effort would be needed to evaluate the outcome. surrogates should be constant and have stable thermal and
Parameters based on 2-point curves allowed direct compari growth characteristics from batch to batch. Enumeration of sur
sons of the effectiveness of PEF in reducing different microbial rogates should be rapid and with inexpensive detection systems
populations and the influence of the media on microbial inacti that easily differentiate them from natural flora. Genetic stabili
vation. The D-values for Bacillus cereus spores are higher than for ty of surrogates is desirable to obtain reproducible results. It is
other microbial populations at the same field strength and tem recommended also that surrogates do not establish themselves
perature. The survivor data for PEF are too limited for definite as "spoilage" organisms on equipment or in the production area.
conclusions. For instance, data based on the same field strength The validation process should be designed so that the surrogate
and temperature are lacking. In addition, only a few of the pub exhibits a predictable time-temperature process character pro
lished reports provide information on the threshold field file that correlates to that of the target pathogen. Introduction of
strengths needed to initiate inactivation. system modifications or variables, leading to inaccurate results
For pasteurization purposes, one is mostly concerned with the (e.g. thermocouple probes changing heating rates, nutrients
inactivation of vegetative cells of disease-producing microorgan added to the product for surrogate growth altering viscosity, etc.)
isms. However, to have a commercially sterile product, the pro should be avoided.
cess must control or inactivate any microbial life (usually target
ing spores of Clostridium botulinum) capable of germinating and Microwave And Radio Frequency Processing
growing in the food under normal storage conditions.
Efficacy of any preservation technology is influenced by a
number of microorganism-related factors that are generally in
M ICROWAVE AND RADIO FREQUENCY HEATING REFERS TO THE
use of electromagnetic waves of certain frequencies to gen
erate heat in a material through 2 mechanisms-dielectric and
dependent of the technology itself. These include the type and ionic. Microwave and radio frequency heating for pasteurization
form of target microorganism; the genus, species and strain of and sterilization are preferred to conventional heating because
microorganism; growth stage; environmental stress selection they require less time to come up to the desired process temper
mechanisms; and sublethal injury. Each influences the resis ature, particularly for solid and semisolid foods. Industrial micro
tance independently of the apparent inactivation capacity of wave pasteurization and sterilization systems have been report
that particular process. ed on and off for over 30 y, but commercial radio frequency heat
Extreme environments may select for forms resistant to severe ing systems for the purpose of food pasteurization or sterilization
conditions leading to a microbial population of greater resistance. are not known to be in use.
An example of this is the higher heat resistance of acid- or salt For a microwave sterilization process, unlike conventional
adapted, heat-shocked or starved E.coli 0157:H7 cells. The ques heating, the design of the equipment can dramatically influence
tions relative to process design and verification are: (1) are the mi the critical process parameter-the location and temperature of
croorganisms and food environments likely to result in stress in the coldest point. This uncertainty makes it more difficult to
duction? (2) would stress induced resistance possibly occur? and make general conclusions about processes, process deviations
(3) if it did, would it significantly impact the inactivation? and how to handle deviations.
Many techniques have been tried to improve the uniformity
Pathogens of Public Health Concern of heating. The critical process factor when combining conven
The following bacteria are known to be responsible for caus tional heating and microwave or any other novel processes would
ing foodborne disease: A hydrophila, B. cereus, C. jejuni, C. botuli most likely remain the temperature of the food at the cold point,
num, Clostridium perfringens, pathogenic E. coli, L. monocytoge primarily due to the complexity of the energy absorption and
nes, Salmonella serovars, Shigella spp, S. aureus, Vibrio spp., and heat transfer processes.

Supplement-JOURNAL.. Of' FOOD 9C1BMCB 9

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies

Since the thermal effect is presumably the sole lethal mecha ter the pressure treatment were not included.
nism, time-temperature history at the coldest location will deter Because some types of spores of C. botulinum are capable of
mine the safety of the process and is a function of the composi surviving even the most extreme pressures and temperatures of
tion, shape and size of the food, the microwave frequency and HPP, there is no absolute microbial indicator for sterility by HPP.
the applicator (oven) design. Time is also a factor in the sense For vegetative bacteria, nonpathogenic L. innocua is a useful sur
that, as the food heats up, its microwave absorption properties rogate for the foodborne pathogen, L. monocytogenes. A non
can change significantly and the location of cold points can shift. pathogenic strain of Bacillus may be useful as a surrogate for
HPP-resistant E. coli 0157:H7 isolates.
Ohmic and Inductive Heating
Pulsed Electric Fields
O HMIC HEATING (SOMETIMES ALSO REFERRED TO AS JOULE
heating, electrical resistance heating, direct electrical resis
tance heating, electroheating and electroconductive heating) is H IGH INTENSITY PULSED ELECTRIC FIELD (PEF) PROCESSING
involves the application of pulses of high voltage (typically
defined as the process of passing electric currents through foods 20-80 kV/cm) to foods placed between 2 electrodes. PEF may be
or other materials to heat them. Ohmic heating is distinguished applied in the form of exponentially decaying, square wave, bi
from other electrical heating methods by the presence of elec polar, or oscillatory pulses and at ambient, sub-ambient, or
trodes contacting the food, frequency, and waveform. slightly above ambient temperature for less than 1 s. Energy loss
Inductive heating is a process wherein electric currents are in due to heating of foods is minimized, reducing the detrimental
duced within the food due to oscillating electromagnetic fields changes of the sensory and physical properties of foods.
generated by electric coils. No data about microbial death kinet Some important aspects in pulsed electric field technology
ics under inductive heating have been published. are the generation of high electric field intensities, the design of
A large number of potential future applications exist for ohm chambers that impart uniform treatment to foods with minimum
ic heating, including its use in blanching, evaporation, dehydra increase in temperature and the design of electrodes that mini
tion, fermentation and extraction. The principal advantage mize the effect of electrolysis.
claimed for ohmic heating is its ability to heat materials rapidly Although different laboratory- and pilot-scale treatment
and uniformly, including products containing particulates. The chambers have been designed and used for PEF treatment of
principal mechanisms of microbial inactivation in ohmic heating foods, only 2 industrial-scale PEF systems are available. The sys
are thermal. While some evidence exists for nonthermal effects of tems (including treatment chambers and power supply equip
ohmic heating, for most ohmic processes which rely on heat, it ments) need to be scaled up to commercial systems.
may be unnecessary for processors to claim this effect in their To date, PEF has been applied mainly to improve the quality
process filings. of foods. Application of PEF is restricted to food products that
can withstand high electric fields have low electrical conductivity,
High Pressure Processing and do not contain or form bubbles. The particle size of the liq

H IGH PRESSURE PROCESSING (HPP), ALSO DESCRIBED AS HIGH uid food in both static and flow treatment modes is a limitation.
hydrostatic pressure (HHP) or ultra high pressure (UHP) Several theories have been proposed to explain microbial in
processing, subjects liquid and solid foods, with or without pack activation by PER The most studied are electrical breakdown and
aging, to pressures between 100 and 800 MPa. Process tempera electroporation.
ture during presimre treatment can be specified from below OC Factors that affect the microbial inactivation with PEF are pro
to above 100 c. Commercial exposure times can range from a cess factors (electric field intensity, pulse width, treatment time
millisecond pulse to over 20 min. Chemical changes in the food and temperature, and pulse waveshapes), microbial entity fac
generally will be a function of the process temperature and treat tors (type, concentration, and growth stage of microorganism)
ment time. and media factors (pH, antimicrobials and ionic compounds,
HPP acts instantaneously and uniformly throughout a mass conductivity, and medium ionic strength.
of food independent of size, shape and food composition. Com Although PEF has potential as a technology for food preserva
pression will uniformly increase the temperature of foods ap tion, existing PEF systems and experimental conditions are di
proximately 3 C per 100 MPa. The temperature of a homogenous verse, and conclusions about the effects of critical process factors
food will increase uniformly due to compression. Compression of on pathogens of concern and kinetics of inactivation need to be
foods may shift the pH of the food as a function of imposed pres further studied.
sure and must be determined for each food treatment process.
Water activity and pH are critical process factors in the inactiva High Voltage Arc Discharge
tion of microbes by HPP. An increase in food temperature above
room temperature and to a lesser extent a decrease below room A RC DISCHARGE IS AN EARLY APPLICATION OF ELECTRICITY TO
pasteurize fluids by applying rapid discharge voltages
temperature increases the inactivation rate of microorganisms through an electrode gap below the surface of aqueous suspen
during HPP treatment. Temperatures in the range of 45 to 50 C sions of microorganisms. A multitude of physical effects (intense
appear to increase the rate of inactivation of food pathogens and wave) and chemical compounds (electrolysis) are generated, in
spoilage microbes. Temperatures ranging from 90-110 C in con activating the microorganisms. The use of arc discharge for liquid
junction with pressures of 500-700 MPa have been used to inac foods may be unsuitable largely because electrolysis and the for
tivate sporeforming bacteria such as Clostridium botulinum. Cur mation of highly reactive chemicals occur during the discharge.
rent pressure processes include batch and semi-continuous sys More recent designs may show some promise for use in food
tems, but no commercial continuous HPP systems are operating. preservation, although the reported results should be confirmed
The critical process factors in HPP include pressure, time at by independent researchers.
pressure, time to achieve treatment pressure, decompression
time, treatment temperature (including adiabatic heating), Pulsed Light Technology
product initial temperature, vessel temperature distribution at
pressure, product pH, product composition, product water activi P ULSED LIGHT JS A METHOD OF FOOD PRESERVATION THAT
involves the use of intense and short-duration pulses of
ty, packaging material integrity and concurrent processing aids. broad spectrum "white light" (ultraviolet to the near infrared re
Other processing factors present in the process line before or af gion). For most applications, a few flashes applied in a fraction of

10 JOURH~L. Of' FOOD SCIENCE-Supplement

xecutlve Summary . . .
a second provide a high level of microbial inactivation. Critical processing factors are assumed to be the amplitude of
This technology is applicable mainly in sterilizing or reducing the ultrasonic waves, the exposure/contact time with the micro
the microbial population on packaging or food surfaces. Exten organisms, the type of microorganism, the volume of food to be
sive independent research on the inactivation kinetics under a processed, the composition of the food and the temperature of
full spectrum of representative variables of food systems and treatment.
surfaces is needed.
Pulsed X-rays
Oscillating Magnetic Aelds A NUMBER OF STUDIES HAVE COMPARED THE EFFECTS OF ELEC
TATIC (SMF) AND OSCILLATING (OMF) MAGNETIC FIELDS HAVE .f"l.tron beam, gamma rays and X-rays, but comparison between
S been explored for their potential to inactivate microorgan
isms. For static magnetic fields, the magnetic field intensity is
these technologies is inconclusive due to differences in the doses
applied. Electrons have a limited penetration depth of about 5
constant with time, while an oscillating magnetic field is applied cm in food, while X-rays have significantly higher penetration
in the form of constant amplitude or decaying amplitude sinuso depths (60-400 cm) depending upon the energy used.
idal waves. OMF applied in the form of pulses reverses the Pulsed X-ray is a new alternative technology that utilizes a
charge for each pulse. The intensity of each pulse decreases with solid state-opening switch to generate electron beam X-ray puls
time to about 10% of the initial intensity. Preservation of foods es of high intensity (opening times from 30 ns down to a few
with OMF involves sealing food in a plastic bag and subjecting it nanoseconds; repetition rates up to 1000 pulses/sin burst mode
to 1 to 100 pulses in an OMF with a frequency between 5 to 500 operation). The specific effect of pulsed in contrast to non
kHz at temperature of Oto 50 C for a total exposure time ranging pulsed X-rays has yet to be investigated.
from 25 ms to 100 ms. The practical application of food irradiation by X-rays in con
The effects of magnetic fields on microbial populations have junction with existing food processing equipment is further facil
produced controversial results. Consistent results concerning itated by: (1) the possibility of controlling the direction of the
the efficacy of this method are needed before considering this electrically produced radiation; (2) the possibility of shaping the
technology for food preservation purposes. geometry of the radiation field to accommodate different pack
age sizes; and (3) its high reproducibility and versatility.
Ultraviolet Light Potentially, the negative effects of irradiation on the food
HERE IS A PARTICULAR INTEREST IN USING ULTRAVIOLET (UV) quality can be reduced.
T light to treat fruit juices, specially apple juice and cider. Other
applications include disinfection of water supplies and food con Research Needs
tact surfaces. Ultraviolet processing involves the use of radiation r"J"1HIS IS A SUMMARY OF RESEARCH NEEDS APPLICABLE TO ALL OR
from the ultraviolet region of the electromagnetic spectrum. The l. most of the technologies. See the chapters on each technolo
germicidal properties of UV irradiation (UVC 200-280 nm) are gy for additional research needs, as well as the complete list of
due to DNA mutations induced by DNA absorption of the UV research needs at the end of the full report.
light. This mechanism of inactivation results in a sigmoidal curve Evaluate the adequacy of the linear first-order survivor
of microbial population reduction. curve model. Although there is evidence of various types of devi
To achieve microbial inactivation, the UV radiant exposure ations from this historical model, a universally accepted alterna
must be at least 400 Jlm2 in all parts of the product. Critical fac tive has not evolved. Future research on an appropriate model(s)
tors include the transmissivity of the product, the geometric con would be beneficial to all preservation technologies.
figuration of the reactor, the power, wavelength and physical ar Establish experimental protocol for obtaining statistically
rangement of the UV source(s), the product flow profile and the reliable kinetic parameters to describe survivor curves for micro
radiation path length. UV may be used in combination with oth bial populations exposed to various alternative technologies, es
er alternative process technologies, including various powerful pecially pulsed electric fields, pulsed light, oscillating magnetic
oxidizing agents such as ozone and hydrogen peroxide, among fields and X-rays. For example, PEF studies should incorporate
others. multiple levels of electric field intensity, as well as test the poten
tial for synergy with temperature.
Ultrasound Identify differences of inactivation action/mechanism(s)
LTRASOUND IS ENERGY GENERATED BY SOUND WAVES OF among alternative technologies. For example, pulsed light and
U 20,000 or more vibrations per second. Although ultrasound ultraviolet light, ohmic and microwave, PEF and thermal, etc.
technology has a wide range of current and future applications in Determine the synergism or antagonism of one alternative
the food industry, including inactivation of microorganisms and process used with another and their combined effect on microbi
enzymes, presently, most developments for food applications al inactivation efficiency.
are nonmicrobial. Determine potential formation of unpalatable and toxic by
Data on inactivation of food microorganisms by ultrasound products due to processing.
in the food industry are scarce, and most applications use Develop methods for measuring and monitoring tempera
combinations with other preservation methods. The bacteri tures or other treatment actions within individual, large, solid
cidal effect of ultrasound is attributed to intracellular cavita particulates.
tion, that is, micro-mechanical shocks that disrupt cellular Identify new or changing critical process factors and their
structural and functional components up to the point of cell effect on microbial inactivation.
lysis. The heterogeneous and protective nature of food with Investigate the influence of pressure on reduction of mi
the inclusion of particulates and other interfering substances crobial populations using the proper experimental design
severely curtails the singular use of ultrasound as a preserva (statistically valid, collection of data at different pressures
tion method. Although these limitations make the current and control of temperature and product), so that z(P) and/or
probability of commercial development low, combination of activation volumes (V) are quantified. Synergistic effects
ultrasound with other preservation processes (e.g. heat and among pressure, temperature and other variables also should
mild pressure) appears to have the greatest potential for in be evaluated.
dustrial applications.

Supplement-JOURNAL OF FOOD SCIENCE 11

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Introduction coefficient. No published report evaluates the potential for a

K INETIC PARAMETERS AND MODELS ARE USED FOR THE DEVEL

opment of food preservation processes to ensure safety.
They also provide the tools to compare the impact of different
synergistic influence of electric field strength and temperature.
There are only two reports with kinetic parameters based on
equation (11) and (12) and they do not include any of the micro
process technologies on reduction of microbial populations. The organisms of food safety concern.
parameters used to analyze and report the reduction of a micro Literature provides an impressive array of kinetic parameters
bial population as a function of process parameters include em to be used in the development of thermal processes. Promising
pirical coefficients experimentally determined from microbial re alternative thermal processes to reduce pathogenic microbial
duction kinetics, as well as constants from expressions based on populations are the use of microwave energy and electrical resis
chemical reaction kinetics. The models and kinetic parameters tance (ohmic), which are included in this report.
are used to present and compare microbial inactivation data Kinetic parameters for thermal inactivation of vegetative cells
from thermal, pressure, and electromagnetic processes. of Salmonella, Escherichia coli, Yersinia enterocolitica, Vibrio, Aero
Kinetic parameters may be used for development of process monas hydrophila, Campylobacter jejuni, Listeria monocytogenes,
es and the comparison of parameters obtained for various micro and Staphylococcus aureus are well established.
organisms, including a discussion on the limitations of the pa In general, the thermal resistance constants z(T) for the vege
rameters. They also can help identify research needs with recom tative microorganisms fall in the range between 4 and 7.7 C.
mendations on experimental approaches to be considered in the The largest D-value (smallest k-value) reported at 110 C for
future. toxin-producing sporeforming microorganisms is 12.42 min
The parameters (D-value and z(T), z(P), z(E), E, k, K, and VJ (0.185/min) for Clostridium botulinum proteolytic Type B spores
have been calculated from data previously reported and using at 110 C in pureed peas.
the models for thermal, pressure, and PEF technologies. The An independent and additional inactivation mechanism due
thermal treatment apply to microwave energy and electrical re to the electric current during the ohmic heating may occur. How
sistance (ohmic) processes, as well as any other technology ever, the overall influence of these nonthermal effects is not suf
where temperature is the primary factor. The parameters for ficient to consider the use of alternate kinetic parameters for de
pressure or PEF treatments should apply to any process where velopment of ohmic heating processes. A two-stage process in
pressure or electricity is the primary critical factor in reducing mi volving ohmic heating, interrupted by a 20 min incubation, re
crobial populations. Given the scarcity of data, these are estimat sulted in enhanced inactivation of B. subtilis spores.
ed parameters and there is an imminent need for more research The nonthermal effects of microwave processes on microbial
in this area. The quantity of data for several other technologies, inactivation have not been confirmed and appear to be of insuf
describing the influence of the treatment on reduction of micro ficient magnitude to be considered during development of pro
bial populations is insufficient for a comparison. cesses.
The basic model assumes a linear first-order relationship be For processes involving the use of pressure for reduction of
tween microbial population and time. There are considerable microbial populations, the F-value is the time the product needs
discussion about the appropriateness of using a first-order mod to be exposed to the specified pressure and other conditions
el to describe the reduction in microbial population for all preser (i.e., temperature) to accomplish the recommended amount of
vation technologies but without strong evidence to support alter inactivation.
native needs, first order kinetics were used. The combined influence of pressure and temperature on in
There are limitations to interpreting these parameters. Care activation kinetics has been investigated on only a limited basis.
should be taken when they are intended to be used as tools in Pressure appears to have a significant influence on inactiva
the develop of processes, comparison of the resistance of differ tion rates for populations of S. aureus. In general, inactivation
ent microbial populations, or identification of appropriate micro rates of various Listeria seem lower than the ones for S. aureus,
organisms. with D-values ranging from 1.48 min (k = 1.556/min) at 350 MPa
Kinetic parameters for microbial populations exposed to ther to 15 min (k = 0.154/min) at 400 MPa.
mal treatments have been assembled over a significant period of Comprehensive data on inactivation rates of Clostridium
time. Published literature has included kinetic parameters need sporogenes spores show the influence of pressure on inactivation
ed to respond to most process, product, and microbial situations. rate, z(P), to be 725 MPa at 93 C, 962 MPa at 100 C, and 752 MPa
Parameters provide a sound basis for development of processes at 108 C.
for the microwave energy and electrical resistance (ohmic) tech Recent inactivation data for C. botulinum Type E Alaska and
nologies. Electrothermal treatments lack conclusive evidence on Type E Beluga indicate that their D-values were in the same
the existence of non thermal effects influencing the reduction in range as for C. sporogenes. The D-values for C. botulinum Type A
microbial populations. 62-A are generally higher than the values for C. sporogenes, even
Data used to determine the D-value and/or k for pressure when considering the influence of temperature and pressure.
treatment of microbial populations appear to be adequate. Limi An in-depth investigation of pressure inactivation of S. cerevi
tations of these data are primarily associated with temperature siae reported for apple juice and orange juice a z(P) of 115 MPa
control or temperature changes during the pressure treatments. and 117 MPa, respectively. These values are much lower than
Evidence suggesting a synergistic impact of pressure and tem those reported for C. sporogenes and C. botulinum.
perature on microbial populations is too limited for use. In summary, the most pressure-resistant pathogenic vegeta
The most serious deficiency is that parameters were collected tive cell populations appear to be those of E.coli 0157:H7 with a
at a single pressure. Only three studies have used three to five D-value of 6 min (k = 0.384/min) at 600 MPa, and S. aureus with
pressure levels, while controlling all other factors affecting the a D-value of7.14 min (k = 0.323/min) at 600 MPa. The most resis
parameters. tant pressure spores appear to be C. sporogeneswith a D-value of
Data available on the influence of PEF on microbial popula 16.772 min (k = 0.138/min) at 600Mpa (T = 90 C) and C. botuli
tions have many limitations. The kinetic parameters are based num Type A62-A with a D-value of6.7 min (k = 0.344/min) at 827
on two points on the survivor curve. No single report has mea MPa (T = 75 C). The pressure coefficient z(P) of 1524 MPa for C.
sured the inactivation of microbial populations at several levels botulinum Type A 62-A constitutes an additional indication of
of electric field strength, leading to the quantification of the PEF the pressure resistance of the spore populations.

12 JOURN~L OP FOOD SCIENCE-Supplement

Executive Summary ...
Currently, the majority of the kinetic parameters for the PEP be the primary targets in most preservation. However, in design
technologies are in a form that fits the basic model. Even with ing processes to inactivate all pathogens, it is also advisable to
the limitations mentioned above, the use of the parameters and consider the resistance properties of other microorganisms such
model to establish process time (F) would seem appropriate in as yeasts, molds, parasites, and protozoa that may persist in or
the short term. Models provide desirable alternatives, but a great grow in foods.
effort would be needed to evaluate them. For pasteurization purposes, one is mostly concerned with the
Adequate inactivation data for estimating the kinetic param inactivation of vegetative cells of disease-producing microorgan
eters for microbial populations exposed to PEP are scarce. isms. However, to have a commercially sterile product, the pro
The D-values Ck-values) have been determined from mea cess must control or inactivate all microbial life (usually targeting
surements of microbial population reduction after one exposure spores of Clostridium botulinum) capable of germinating and
time to a given electrical field strength. Parameters are present growing in the food under normal storage conditions.
ed in this report to allow for more direct comparisons of the effec Differences in resistance of microorganisms may be found
tiveness of PEP in reducing different microbial populations, as not only between genera and species but also between strains of
well as to note the influence of the media on microbial inactiva the same species. Another factor that can affect resistance of
tion. There is a great need to better understand survivor curve bacteria to preservation processes is stage of growth. Extreme en
shapes for microbial populations exposed to pulsed electric vironments may result in the selection of mutants resistant to se
fields. This suggests a significant advantage for PEF, when com vere conditions suggesting that bacterial stress may induce hy
pared to the other technologies, assuming first order kinetics in permutability. Leading to a microbial population of greater resis
the range of 6 to 12Ds. This assumption may not be valid be tance. Higher heat resistance of acid- or salt-adapted, heat
cause inactivation of more than 99.9% of a cell population is fre shocked, or starved E. coli 0157:H7 cells. Sublethal stresses to
quently difficult to achieve. ethanol, acid, hydrogen peroxide, heat, or salt had variable ef
The D-values for B. cereus spores are higher than for other mi fects on subsequent exposure of L. monocytogenes to lethal levels
crobial populations at the same field strength and temperature. of the same stressors. The questions relative to process design
In summary, the survivor data for microbial populations ex and verification are: (1) are the microorganisms and food envi
posed to PEP are too limited to be used in reaching definite con ronments likely to be of the type involved in stress induction, (2)
clusions about the magnitude of the kinetic parameters. Data would stress induced resistance possibly occur at any point in
are not adequate to calculate parameters to compare the relative the food processing operation, and (3) if it did, would it signifi
resistance of various microbial populations to PEE For instance, cantly impact the inactivation process leading to possible under
data based on the same field strength and temperature are lack processing. Inactivation often results in a continuum of effects
ing. In addition, only a few of the published reports provide in with some degree of injury. Injured cells can be easily underesti
formation on the threshold field strengths needed to initiate in mated, resulting in misleading conclusions about the efficiency
activation. of the method. The choice of "best" method to enumerate the
test organism will largely depend on the experimental variables.
The following is a list of research areas that need further in The following bacteria are known to be responsible for caus
vestigation: ing foodborne disease: Aeromonas, Bacillus cereus, Campylobacter
Evaluation of the adequacy of a linear first-order survivor jejuni, Clostridium botulinum, Clostridium perfringens, pathogenic
curve. Although there is evidence of various types of deviation Escherichia coli, Listeria monocytogenes, Salmonella, Shigella, Sta
from the historical model, a universally accepted alternative has phylococcus aureus, Vibrio species, and Yersinia enterocolitica. The
not evolved. Future research on an appropriate model would be primary virus of concern that is carried by foods is Hepatitis A.
beneficial to all preservation technologies. Cryptosporidium and Cyclospora are protozoa of concern mainly
Investigation on the influence of pressure on reduction of because they produce resistant cysts. When exploring the new
microbial populations using the proper experimental design (sta preservation technologies, their preservation level should be
tistically valid, collection of data at different pressures and control compared to that of classical pasteurization or commercial steril
of temperature and product). so that z(P) and/or activation vol ization technologies.
umes (V) are quantified. These investigations should also evalu Bacteria of the genus Salmonella is one of the most well
ate synergistic effects between pressure and temperature. known and frequently encountered pathogen in foods. Approxi
Research on developing an experimental protocol for ob mately 2,200 serovars of Salmonella enterica subsp. enterica exist.
taining statistically reliable kinetic parameters to describe survi Inadequate heating of foods of animal origin or cross contam
vor curves for microbial populations exposed to PEE These stud ination are the primary vehicles for salmonellosis outbreaks.
ies should incorporate multiple levels of electric field intensity, The maximum growth temperature for Salmonella is 49.5 c.
as well as the potential for synergy with temperature. The microorganism is considered to be sensitive to heat and is
Further research on the PEP microbial inactivation models killed easily by pasteurization of milk equivalent to 71.7 c for 15 s.
presented as equation (11) or (12). The investigations need to The two primary foodborne pathogens that cause microor
provide reliable kinetic parameters for these models and for the ganisms for shigellosis, are Shigella flexneri and Shigella sonnei.
microbial population of interest in food safety. The microorganism is not particularly heat resistant.
Efficacy of a preservation technology is influenced by a num Five to six types of diarrheagenic Escherichia coli are known
ber of microorganism-related factors that are generally indepen today, including enteropathogenic, enterotoxigenic, enteroinva
dent of the technology itself. These include the type and form of sive, enterohemorrhagic, enteroadherent, and enteroaggrega
target microorganism; the genus, species, and strain of microor tive. Enterohemorrhagic Escherichia coli (EHEC) causes a seque
ganism; growth stage; environmental stress selection mecha la called hemolytic uremic syndrome. Foods implicated in out
nisms; and sublethal injury. Each influences the resistance inde breaks of EHEC include ground beef, roast beef, alfalfa sprouts,
pendently of the apparent inactivation capacity of that particu raw milk, apple cider, meat sandwiches, mayonnaise, lettuce,
lar process. and dry salami. The heat resistance of Escherichia coli is equiva
Among the food microbial hazards, bacteria are generally the lent to or slightly lower than Salmonella.
most resistant microorganisms of concern and therefore should Yersinia enterocolitica is a pathogen that causes a foodborne
infection with an onset time of3-7 days. Yersinia, enterocolitica,

Supplement-JOURNAL, OF FOOD SCIENCE 13

JPS SUPPLEMENT: t<lnetlce of Microbial Inactivation for ~lternatlve Pood Proce55lng Technologies

can grow at refrigeration temperatures and has very low heat re been based on two main factors: 1) knowledge of the thermal in
sistance in milk. activation kinetics of the most heat-resistant pathogen of con
Vibrio cholerae, Vibrio parahaemolyticus, and Vibrio vulnificus cern for each specific food product and 2) determination of the
are found in the marine environments. Heating above 60 C nature of heat transfer properties of the food system, generally
should easily inactivate this heat-sensitive organism (Table 6). defined by a heat transfer rate. Validity of the established pro
Aeromonas hydrophila. Infections among healthy people are cess is often confirmed using an inoculated test pack study test
generally self-limiting whereas children are at the greatest risk. ed under actual plant conditions Surrogate organisms are often
Aeromonas hydrophila is eliminated by mild heat treatments. utilized to validate the process as biological indicators that can
Campylobacter jejuni is the leading cause of foodborne illness mimic the pathogen.
in humans in the United States. It causes a diarrheal infection One of the challenges in using new processing technologies
but can also have a more severe sequela known as Guillain-Barre for food preservation and pathogen inactivation is to determine
Syndrome and is extremely sensitive to heat and would be inacti if traditional methodologies can be used to establish and vali
vated at temperatures as low as 55 C. date the new process. Thus, the two factors described above,
Listeria monocytogenes is the cause of a foodborne illness which are well established for thermal processes, should be used
known as listeriosis. It often attacks persons with suppressed im for establishing and validating scheduled electrothermal pro
mune systems, including pregnant females, neonates, the elder cesses. For other preservation processes not based on heat inac
ly, and those persons immunosuppressed by medications. Liste tivation, nonpathogenic surrogates still need to be identified
ria monocytogenes is truly ubiquitous and can survive for long and their significance evaluated. Research needs to be done in
periods of time under extreme and adverse conditions. Heating the area.
equivalent to milk pasteurization heating to 68.3 C or above Surrogates are selected from the population of well-known or
should inactivate the microorganism in milk or other foods. ganisms that have well-defined characteristics and a long history
Staphylococcus aureus can produce a toxin that, if ingested, of being nonpathogenic. The following microbial characteristics
will produce mild to severe symptoms of nausea, cramps, vomit are desirable:
ing, diarrhea, and prostration in 2-7 h, lasting 1 to 2 days. The
toxin produced is resistant to heating. The cells are not heat re Nonpathogenic.
sistant. Thermal or other inactivation characteristics that can be
Bacillus cereus is a sporeforming organism that produces two used to predict those of the target organism.
types of illness: the diarrheal syndrome, which develops within Durability to food and processing parameters similar to tar
20 h following ingestion, or the emetic response, which occurs 1 get organism (e.g., pH stability, refrigeration stability, oxygen tol
to 5 h after ingestion. It produces spores, and is considered resis erance, etc.).
tant to at least pasteurization conditions. Spores of Bacillus cereus Stable thermal and growth characteristics that are similar
have D95c values ranging from 1.5 to 36.2 min. from batch to batch.
Clostridium perfringens food poisoning is the result of an en Easily prepared into high-density population forms.
terotoxin action and generally the result of poor refrigeration and Once prepared, population is constant until utilized.
inadequate reheating of cooked foods. Ingestion of large num Easily enumerated using rapid and inexpensive detection
bers of organisms is necessary both for the microorganism to sur systems.
vive passage through the stomach and to initiate growth and tox Easily differentiated from other natural flora.
in production in the intestines Follows inactivation kinetics in a manner similar to patho
Clostridium botulinum produces a potent neurotoxin that gens receiving the same inactivation treatment.
may be toxic to both humans and animals. Fruits and vegetables Genetically stable so results can be reproduced indepen
can carry heat-resistant Type A, B, and F C. botulinum spores that dently of laboratory or time of experiment.
are a major concern in low-acid canned foods. Type E spores also Will not establish itself as a "spoilage" organism on equip
can be found in fish and seafood products. The heat Duo c -val ment or in the production area.
ues of botulinum Types A and proteolytic B spores generally Not susceptible to injury or reversible inactivation properties.
range from 0.6 to 3 min at (Tables 14 and 15). Clostridium botuli
num Type E spores are much less resistant. The use of surrogate organisms to determine and validate
The protozoa, Cryptosporidium parvum and Cyclospora cayet processes for alternative processes should consider
anensis, are not able to replicate in foods, but they do produce Keep the approach as easy, accurate, and simple as possi
cysts that can remain infectious in foods for extended periods of ble.
time. Thermal resistance values include D60 c of 20 sec for Design the process so that the surrogate exhibits a predict
Cryptosporidium oocysts in distilled water and D71 _7 c of< 1sec in able time-temperature process character profile that correlates
milk. Heat resistance of Cyclospora may be similar to that of to that of the target pathogen.
Cryptosporidium. Be attentive to the introduction of system modifications or
Enteric viruses that can cause foodborne infection from un variables, which could alter the properties of the food leading to
pasteurized foods include Hepatitis A virus, Rotavirus, and Nor inaccurate results (e.g. thermocouple probes changing heating
walk virus. Shellfish and unprocessed fruits are the most vulner rates, nutrients added to the product for surrogate growth alter
able to viral contamination because they do not receive a heat ing viscosity, etc.).
pasteurization step. Validate the susceptibility or tolerance of a surrogate, if it is
Establishment of traditional thermal processes for foods has known.

14 JOURNAL.. OF FOOD 9C1BNCB-Supplement

xecutlve Summary ...
Statua of the Report on Technologlea
FDA Questions Alternative Processing Technologies
Ohmic Heating Microwave and Radio Frequency
Process Description Well described Well described
Mechanism Of Inactivation Well described Well described
Critical Process Factors And Quantification Well described Hard to predict cold zones Well described Hard to predict cold zones
Process Deviations As in conventional thermal processing As in conventional thermal processing
Organisms Of Concern As in conventional thermal processing As in conventional thermal processing
Indicator Organisms As in conventional thermal processing As in conventional thermal processing
Main Research Need Prediction of cold zones Prediction of cold zones and uniformity of heating
1 Not enough information was available on pulsed X-rays processing to be presented in this table.
2 UV not presented in this table because only recent studies were discussed, not a comprehensive review.
3 Not enough information was available on inductive heating processing to be presented in this table.

Statua of the Report on Technologl. .

FDA Questions Alternative Processing Technologies
High Voltage PEF Pulsed Light OMF
Arc Discharge
Process Description Well described Well described Well described Well described
Mechanism Of Inactivation Well described Well described Described Not identified
Crltlcal Process Factors
and Quantification Not identified Described Kinetic models Not well defined Not well defined
proposed, need validation
Process Deviations Not identified 1 Identified Not identified 1 Not identified'
Pathogens Of Concern Not identified Not identified Not identified Not identified
Indicators' Not identified Not identified Not identified Not identified
Main Research Need Independently Treatment measurement Independently Consistent microbial effects
conducted research and kinetic models validation conducted research
1 Lack of critical process factors quantification does not permit suggested responses to process deviations.
2 Must identify pathogens of concern before indicators are finalized.

Statua of the Report on Technologles

FDA Questions Alternatlve Processing Technologies
Ultrasound High Pressure
Proceu Description Well described Well described
Mechanism Of Inactivation Described Well described
Critical Process Factors
and Quantification Suggested Well described
Proposed models
Process Deviations Not identified' Well described
Pathogens Of Concern Not identified Identified
Indicators Not identified 2 Suggested
Main Research Need Multiple in combination with other technologies Validation of kinetic models Influence of synergistic processing
conditions
1 Lack of critical process factors quantification does not permit suggested responses to process deviations.
2 Must identify pathogens of concern before indicators are finalized.

Supplement-JOURNAL. OP FOOD SCIENCE 15

Jf'S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Overarching Principles: Kinetics and

Pathogens of Concern for All Technologies
1. Kinetic Parameters for Inactivation of Microbial Populations
1.1. Models and Parameters ferent parameters need to be identified and used for process de
Kinetic parameters and models are used for the development velopment and prediction purposes.
of food preservation processes to ensure safety. They also pro Only a limited amount of the published data on microbial in
vide the tools to compare the impact of different process technol activation has been analyzed using the reaction rate model to
ogies on reduction of microbial populations. The parameters quantify first-order rate constants (k). On the other hand, most
used to analyze and report the reduction of a microbial popula published data on changes of food quality attributes have been
tion as a function of process parameters include empirical coeffi presented as reaction rate constants (k). As indicated by the rela
cients experimentally determined from microbial reduction ki tionship between D-value and k, published data can be easily
netics, as well as constants from expressions based on chemical transformed.
reaction kinetics. The purpose of this section is to present the
models and kinetic parameters used to present and compare mi 1.1.2. Temperature coefficients
crobial inactivation data from thermal, pressure and electromag Traditionally, the influence of temperature on microbial pop
netic processes. ulation inactivation rates has been expressed in terms of the
thermal resistance constant (z-value) using the following model:
1. 1.1. Rate constants
The traditional approach to describing changes in microbial (5)
populations as a function of time has used the survivor curve
equation: The thermal resistance constant z(T) is the temperature in
crease needed to accomplish a 1-log cycle reduction in the D-val
log [N / N0l = -ti D (1) ue. The reference decimal reduction time (DR) is the magnitude
at a reference temperature (TR) within the range of temperatures
where: used to generate experimental data. Microbial populations with
N = microbial population at any time, t higher resistance to temperature change are described by larger
N0 = initial microbial population z(T). The most evident examples are the larger z(T) for spores
D = decimal reduction time, or time required for a 1-log cycle compared to the ones for vegetative cells.
reduction in the microbial population. An alternative model for describing the influence of tempera
The corresponding model from chemical reaction kinetics is ture on microbial population reduction rates is the Arrhenius
the first-order kinetic model: equation. The model illustrates the influence of temperature on
the reaction rate constant (k), as follows:
dN I dt = -kN (2)
(6)
where:
k = reaction rate constant (first-order), or the slope of the nat where:
ural logarithm of survivors in contrast to time for the microbial ko = Arrhenius Constant
population. E = Activation Energy Constant
Equation (2) can be integrated to obtain a more familiar ex TA = Absolute Temperature
pression for the reduction of microbial populations: R = Universal Gas Constant
Based on the Arrhenius model (Eq. 6), the slope of In (kl in
In [N / N01= - kt (3) contrast to 1/TA plot determines the temperature coefficient E
(activation energy constant). The activation energy constant de
By comparing Eq. (1) and (3), the relationship between the deci scribes the influence of temperature on the magnitude of the
mal reduction time and the first-order reaction rate constant is: first-order reaction rate constant (k).
When the thermal resistance model and the Arrhenius model
k= 2.303 /D (4) are applied to microbial population reduction rate data over the
same temperature range, a relationship between the 2 coeffi
The primary parameters (D-value or kl would describe the cients [z(T) and El is evident. By comparison of Eq. (5) and (6),
microbial population reduction at a constant and defined tem the following relationship can be obtained:
perature, pressure and/or electric field. The inherent assump
tion in the use of these models (and the corresponding parame E = 2.303RTi / z (7)
ters) is that the reduction in microbial population is described by
the first-order reaction model. Alternative models are being de The temperature used in Eq. (7) should be selected as a mid
veloped to explain microbial inactivation kinetics when the lin point in the range of temperatures used to generate the original
earity of the data is questionable (Peleg and Cole 1998; Ander experimental data. Equation (7) does suggest that the relation
son 1996). If there is evidence of a different reaction model, dif ship between the 2 temperature coefficients [E and z(T)l de

16 JOURNAL OF FOOD SCIBNCB-Supplement

Overarching Principles . . .
pends on temperature. The magnitudes of the 2 coefficients, intensity applied should be above the threshold electric field in
however, are significantly different, and any influence of tem tensity, the critical electric field intensity for the target microor
perature is negligible as long as the temperature reference is ganism. A model similar to those for temperature and pressure
within the range used for data collection. The use of the coeffi can be used to describe the influence of electric field intensity on
cients iz( Tl or El should be limited to the range of temperatures the rate of microbial population reduction. The proposed model
used to obtain experimental D-values. The z(T) should only be would be:
used with a defined reference temperature as emphasized by
Datta (1992). log ID / DR] = - (E - En) I z (10)
The use of the first-order models and the corresponding mod
els for temperature influence must be applied within the limits where:
of data used to generate the parameters within the expressions. DR= decimal reduction time at a reference electric field inten
The estimation of the kinetic parameters from the appropriate sity (En),
model requires careful attention to statistical limits created by The electric field coefficient in this model is defined as:
the experimental data. Several authors, including Arabshahi and z(E) = the increase in electric field intensity (E) required to re
Lund (1985) and van Boeke! (1996), have demonstrated the in duce the decimal reduction time (DJ by I-log cycle at a specific
fluence of statistical parameters on the use of the prediction temperature and pressure.
models. All D-values used in this type of analysis should be acquired
at the same temperature and pressure. A minimum of3 D-values
1.1.3. Pressure coefficients should be obtained for the data analysis.
There are only limited references to parameters used to de An alternative model for describing the influence of electric
scribe the influence of pressure on the rate of microbial popula field intensity on the survival of a microbial population was pro
tion reduction. Zook and others (1999) have used a parameter posed by Peleg (1995). The model is based on the Fermi equa
similar to the thermal resistance constant z(Tl. based on the fol tion and can be expressed as:
lowing model:
NI N 0 = 1/{1 + exp[(- Ed) I Kil (11)
(8)
where:
where DH= decimal reduction time at a reference pressure (PR). Ed= the electric field intensity when microbial population
In this report, the pressure coefficient will be defined as has been reduced by 50%.
z(P) = the pressure increase required to accomplish a I-log cycle K = a coefficient with magnitude based on the slope of the
reduction in the decimal reduction time (D-value). survivor curve obtained at several levels of electric field intensi
In order for pressure resistance constant z(P) to be meaningful, ty.
it is important to include a minimum of3 D-values in the analysis This model has been applied to survivor data for several dif
of data. All D-values must be obtained at the same temperature ferent microbial populations to generate typical magnitudes of
and above the threshold pressure needed for the target microbial the coefficient (K) (Peleg 1995). Larger magnitudes of the coeffi
inactivation. The threshold pressure (or critical pressure) is the cient would suggest a higher resistance to changes in electric
pressure below which microbial inactivation does not occur. field intensity.
An alternate model to describe the influence of pressure on A similar model has been proposed and used by Hulsheger
microbial inactivation rates is based on the Eyring equation, as and others (1981) and applied by Jeyamkondan and others
proposed by Weemaes and others (1999). The model describes (1999). The model describes the survivor number as a function of
the reaction rate constants (kl as follows: electric-field strength and treatment time:

(9) NI N 0 = {t / tcJl-(E -Eel/Kl (12)

where: where:
kR reaction rate constant at reference pressure (PR) t = treatment time
V activation volume constant tc = critical treatment time or treatment time below which no
P pressure inactivation of microorganisms occurs
TA absolute temperature Ee = critical electric field strength or electric field strength be
The activation volume constant (VJ is the pressure coefficient low which no inactivation of target microorganism occurs
obtained from the slope of the In (kl in contrast to (P - PR) plot. K = specific rate constant
The magnitude ofV increases as the slope of the plot increases. The model proposed by Hulsheger and others (1981) is simi
When the rate of microbial inactivation increases significantly lar to Eq. (11). but accounts for exposure time at a given electric
with small changes in pressure, the magnitude of the V will be field intensity. The coefficient (K) has a similar relation to electric
larger. Alternatively, smaller values ofV describe microbial popu field intensity as in Eq. (11) and the relative magnitudes should
lations with inactivation rates that would change less when pres be interpreted in the same manner.
sure changes. As suggested when describing z(P) values, it is im
portant for all reaction rate constants (kl used in the analysis to 1.2. Kinetic Parameters for Inactivation of Microbial
be measured at the same temperature. For the activation volume Pathogens
constant (V) to be useful and meaningful, the k constant should The purpose of this section is to provide an overview and dis
be measured at pressures above the threshold pressure needed cussion on the kinetic data of microbial population inactivation.
to inactivate the target microbial population. This section addresses the use of kinetic parameters for develop
ment of processes and the comparison of parameters obtained
1.1.4. Electric field coefficients for various microorganisms, including a discussion on the limita
As in the case of pressure processes, when microbial popula tions of the parameters. Finally, the research needs will be ad
tions are exposed to pulsed electric fields (PEFJ. the electric field dressed, with specific attention to recommendations on experi

Supplement-JOURMAL OP FOOD SCIENCE 17

J.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food ProceHlng Technologies
mental approaches to be considered in the future. tions, or to identify appropriate surrogate microorganisms.
Kinetic parameters describing the inactivation of microbial As illustrated in this report, the kinetic parameters for micro
pathogens are presented in Tables lA, B and C and are a summa bial populations exposed to thermal treatments have been as
ry of parameters presented in other sections of this report. The sembled over a significant period of time. Over time, the pub
intent of the summary is to provide an overview and a compari lished literature has included kinetic parameters needed to re
son of the kinetic parameter magnitudes for the various microor spond to most process, product and microbial situations. The pa
ganisms for each process technology. The parameters defined in rameters provide a sound basis to develop processes for the mi
Section l.l. (D-value and z(T), z(P). z(E), E, k, Kand V) have crowave energy and electrical resistance (ohmic) technologies. In
been calculated from data previously reported and using the addition, the available parameters provide a sound basis to com
models in Section l. l for thermal, pressure and PEF technolo pare different microbial populations and the influence of differ
gies. The parameters for thermal treatment also apply to micro ent product environments on the parameter magnitudes. The
wave energy and electrical resistance (ohmic) processes, as well key issue for these electrothermal treatments is the lack of con
as any other technology where temperature is the primary factor clusive evidence on the existence of non thermal effects influenc
in reduction of the microbial population. Likewise, the parame ing the reduction in microbial populations. It is believed, howev
ters for pressure or PEF treatments should apply to any process er, that those effects would add an extra factor of safety to the
where pressure or electricity is the primary critical factor in reduc preservation process (see Microwave and Ohmic and Inductive
ing microbial populations. It must be noted that, given the scar Heating chapters).
city of data, these are estimated parameters and there is an im In general, the data used to determine the D-values (and
minent need for more research in this area. Although this report k-values) for pressure processes appear to be adequate. The lim
contains references to several other technologies, the quantity of itations to these data are primarily associated with temperature
data describing the influence of the treatment on reduction of control during pressure treatments. In addition, when tempera
microbial populations is insufficient at this time. ture changes have been reported, the influence on the kinetic
Like in most of the published literature, in this report data parameters has not been analyzed. The evidence suggesting a
have been analyzed assuming that the reduction in microbial synergistic impact of pressure and temperature is too limited for
populations follows a linear first-order model, with the exception use in process evaluation.
of the PEF parameters that will be discussed in Section 1.2.2.4. The most serious deficiency in pressure process kinetics is
The potential of nonlinear inactivation data or the use of alterna that most of the parameters (D and k) have been measured at a
tive models cannot be ignored. Because there is currently insuffi single pressure. Only 4 studies (Rovere and others 1996; Kalchay
cient information on alternative models to allow the type of com anand and others 1998; Zook and others 1999; Reddy and others
parisons being considered in this portion of the report, these is 1999) have used 3 to 5 pressure levels, while controlling all other
sues will be discussed when describing the specific technologies. factors influencing the parameters. The results from these stud
The use of consistent parameters for all preservation technol ies are adequate to evaluate the pressure coefficient [z(P)J and/
ogies should improve the efficiency of future investigations and or activation volume [VJ. With exception of the 4 publications cit
encourage uniformity in the methodologies for establishment of ed above, the estimated parameters are limited by the number
minimum process requirements. of pressure magnitudes used, the Jack of temperature control
and the Jack of multiple data for the same microorganism and/or
1.2.1. Process development product/substrate. By overcoming these limitations, parameters
The parameters presented in Tables lA, lB and lC parallel from future investigations will meet the needs of process devel
the traditional parameters used for development of thermal opment and product/microorganism comparisons.
preservation processes. The basic model for process develop The data available on the influence of PEF on microbial popu
ment is based on the survivor curve Eq. (l) or (2): lations have many limitations. As will be indicated during the
discussion of parameters in Table lC, the kinetic parameters (D
F =- D log [ N0 / N I =D log [ N / N0 I (13) value or k) are based on 2 points on the survivor curve, the initial
or: population and the final population. It should be recognized
that the values of parameters in Table lC were not based on lin
F =-In [ N0 /NJ / k =In [ N / N0 I I k (14) ear regression analysis. In addition, temperature controls and
collection of multiple data points at the same temperature level
where F is the total time required to reduce the microbial popula are Jacking.
tion by a specified magnitude needed to ensure product safety, At this time, no single report has measured the inactivation of
under the conditions defined by D-value or k. The basic model microbial populations at several levels of electric field strength,
assumes a linear first-order relationship between microbial pop leading to the quantification of the PEF coefficient z(E) . Al
ulation and time. Currently, there is a Jack of historical evidence though 3 such coefficients are presented in Table lC, these coef
to support alternative models; however, there is considerable ficients have been estimated based on kinetic parameters re
discussion about the appropriateness of using a first-order mod ported in separate investigations and must be used with these
el to describe the reduction in microbial population for all preser limitations in mind. There are no published reports that evaluate
vation technologies. For example, models for PEF technology as the potential for a synergistic influence of electric field strength
presented in Eq. (l l) and (12) should continue to be evaluated, and temperature. There are only 2 reports with kinetic parame
but at this time, input parameters for these models are limited. ters based on Eq. (11) and (12) and these reports provide limited
parameters on microorganisms of food safety concern. They do
1.2.2. Inactivation data and parameters not include any of the microorganisms of food safety concern.

1.2.2.1. Limitations of the calculated parameters 1.2.2.2. Thermal processes

Afew limitations need to be considered when interpreting the The literature provides an impressive array of kinetic parame
parameters presented in Tables lA, Band C. Care should be tak ters to be used in the development of thermal processes. In addi
en when they are intended to be used as tools to develop pro tion to data and parameters on inactivation of microbial popula
cesses, to compare the resistance of different microbial popula tions, Table lA includes additional information on the medium

18 JOURNAL.. OF FOOD SCIENCE-Supplement

Overarching Principles ...
used and specific experimental conditions (that is, temperature) indicate that the reduction in 0-value (higher k-value) and the
when available. The time parameters are the decimal reduction increase in z(T) (lower E) when using ohmic heating are statisti
time (D-value) and the corresponding rate constant (k). The cally significant. These results suggest an independent and ad
temperature coefficients include the thermal resistance constant ditional inactivation mechanism due to the electric current dur
[z(Tl] and the activation energy constant (E). ing the ohmic heating. The overall influence of these nonthermal
The kinetic parameters calculated for the thermal inactiva effects, however, is not sufficient to consider the use of alternate
tion of microbial pathogens in Tables IA, B and C should be con kinetic parameters for development of ohmic heating processes.
sidered when using any process technology where temperature These authors have demonstrated that a 2-stage process involv
is the primary mode of microbial inactivation. The most promis ing ohmic heating, interrupted by a 20-min incubation, resulted
ing alternative thermal processes to reduce pathogenic microbial in enhanced inactivation of B. subtilis spores. This increase in in
populations are microwave energy and electrical resistance activation has been attributed to the positive influence of elec
(ohmic). which are included in this report. As suggested in the tric treatment on spore germination.
chapters on microwave and ohmic and inductive heating, it is as Separate data for microwave heating are not included in this
sumed that the direct influence of microwave energy or electrical section. The nonthermal effects of microwave processes on mi
resistance on microorganisms is negligible. Therefore, thermal crobial inactivation have not been confirmed and appear to be of
kinetic parameters should be considered for the above-men insufficient magnitude to be considered during development of
tioned electrothermal processes (ohmic, inductive and micro processes.
wave heating).
Kinetic parameters for vegetative cells of Salmonella serovars, 1.2.2.3. Pressure processes
pathogenic Escherichia coli, Yersinia enterocolitica, pathogenic For processes involving the use of pressure for reduction of
Vibrio spp., Aeromonas hydrophila, Campylobacter jejuni, Listeria microbial populations, the F-value is the time the product needs
monocytogenes and Staphylococcus aureus are presented in Table to be exposed to the specified pressure and other conditions
IA. In general, the 0-values are relatively small and the k-values (that is, temperature) to accomplish the recommended amount
are relatively large for the vegetative microorganisms normally of inactivation. Since the application of most of the pressure
targeted in pasteurization or other mild thermal processes. Other technologies involves instantaneous adjustment to the process
than the abnormally high 0-values (low k-values) for Salmonella pressure, the use of the basic model is straightforward. The pres
pathogens in milk chocolate, Salmonella Typhimurium and L. sure coefficients [z(P) or VJ provide users with the flexibility to
monocyctogenes are the most thermally resistant vegetative mi select the most appropriate pressure for the specific application.
croorganisms. The largest D-value for Salmonella 'Iyphimurium For pulsed-pressure technologies, the model would need to in
is 18.3 min (k= 0.126/min) at 55 c. For L. monocyctogenes, the corporate the influence of time and incremental pressure. In this
largest 0-value is 16.7 min (k = 0.14/min) at 60 C. The largest case, the estimation of kinetic parameters will require the mea
0-values for E.coli are 6.6 min (55 C) for 0111:84 and 6.4 min surement of other variables.
(57 C) for 0157:H7. Based on limited data for 0157:H7 in ground The kinetic parameters for inactivation of microbial popula
beef, a z(T) of 5.3 C has been estimated. Other significant mag tions due to pressure are presented in Table 18. The time param
nitudes for D-values include 6.6 min for A. hydrophila at 48 c eters, decimal reduction time (D-value) and first-order rate con
and 16.7 min for L. monocytogenes in cured ground beef at 60 c. stant (k), were calculated based on the reduction in microbial
A z(T) of 5.56 C for L. monocytogenes in milk has been estimat population at a constant pressure. The pressure coefficients are
ed, based on published data. z(P) and the activation volume constant (V), as defined in Sec
In general, the thermal resistance constants z(T) for the vege tion 1.1.3. and indicate influence of pressure on the rate of inac
tative microorganisms fall in the range between 4 and 7.7 C. tivation. In most references cited, there are insufficient data to
This range includes a z(T) of 5.3 c for E.coli 0157:H7 in ground estimate these coefficients. Special consideration needs to be
beef and of 5.56 C for L. monocytogenes in milk, both estimated given to the combined use of pressure and temperature. Based
from limited data presented in the references cited. The larger on the current available information, the z(P) and z(T) parame
z(T) presented include 12.4 to 25 C for Vibrio species (in fish ters should be adequate for process development. The com
products) and 17.7 to 18.9 C for Salmonella serovars (in milk bined influence of pressure and temperature on inactivation ki
chocolate). These abnormally high z(T) for vegetative microor netics for microbial populations has been investigated, although
ganisms should be noted for these products and may be specifi not extensively. Published reports suggest a synergistic impact of
cally associated with them. pressure and temperature on inactivation rates, but additional
S. aureus, a vegetative microorganism that produces a heat investigations are needed. The independent influence of pres
stable toxin, has 0-values similar to other vegetative popula sure on rates, as indicated by the z(P) or V parameters, needs to
tions. The z(T) of 9.5 C is relatively high and must be considered be clearly established. The influence of temperature can be
when developing processes for situations where S. aureus could quantified in several ways, but the optimum approach would be
present a health hazard. based on the dependence of z(P) or Von temperature. Although
The largest D-value (smallest k-value) reported at 110 c for minimum pressure thresholds for microbial inactivation are not
toxin-producing, sporeforming microorganisms is 12.42 min presented in this section, these parameters are discussed in the
(0.185/min) for Clostridium botulinum proteolytic 'Iype B spores section on high pressure processing.
in pureed peas. Most other D-values are in the more typical Several investigations on Salmonella indicate that decimal re
range of 1 to 3 min for sporeforming microorganisms. Other val duction times (D-value) range from 1.48 to 6 min (k = 0.348 to
ues to be noted are the D-value of 36.2 min (k = 0.064/min) for 1.556/min). with pressure having an obvious influence on the
Bacillus cereus spores at 95 C and 100 min (k = 0.023/min) for C. rate. Most of the studies have been conducted at ambient tem
botulinum nonproteolytic Type E spores at 70 c. When ex peratures (20 to 25 C). The 0-values for E. coli are as high as 15
pressed at 110 c, these 0-values become 1.18 min for the B. min (k = 0.154/min) at 300 MPa and 6 min (k = 0.384/min) at 600
cereus spores and less than 1 sec for the 'Iype E spores. MPa for 0157:H7. There are insufficient data to establish the in
Data for Bacillus subtilis spores have been included in Table fluence of pressure or temperature and therefore z(P) or z(T)
IA to illustrate the influence of ohmic heating on inactivation ki were not estimated.
netics. These data were reported by Cho and others (1999) and Pressure appears to have a significant influence on inactiva

Supplement-JOURN~L Of' POOD SCIENCE 19

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
tion rates for populations of S. aureus, apparently one of the Currently, the majority of the kinetic parameters for the PEF
most pressure-resistant vegetative bacteria, as suggested by D technologies are in a form that fits the basic model [Eq. (13) or
values of7.14 min (k = 0.323/min) at 600 MPa compared to 150 (14)]. Even with the limitations mentioned above, the use of the
min (k = 0.015) at 400 MPa. D-values reported for 500 MPa are parameters and model to establish process time (Fl would seem
lower than the ones for 400 MPa, but were measured in a differ appropriate in the short term. Models, such as Eq. (11) or (12),
ent medium and may be influenced by temperature. However, provide desirable alternatives, but a great effort would be need
in comparable experiments, inactivation rates of selected strains ed to evaluate them. The use of z(E) values provides the users
of various Listeria spp. with, for example, D-values ranging from with flexibility to select the optimum electric field strength for a
1.48 min (k = 1.556/min) at 350 MPa to 15 min (k = 0.154/min) at given product and to evaluate the influence of other factors such
400 MPa were lower than the ones for S. aureus. These data were as synergistic effects of electric field strength and temperature.
measured at ambient temperatures (20 to 25 C). Recently, D Adequate inactivation data for estimating the kinetic parameters
values of over 5 min were also reported for L. monocytogenes at for microbial populations exposed to PEF are scarce. The infor
345 MPa and 25 C (Alpas and others 1999). mation presented in Table IC compares decimal reduction times
Comprehensive data on inactivation rates of Clostridium CD-value) and first-order rate constants (kl. for experiments
sporogenes spores were reported by Rovere and others (1996). where electrical field strength (BJ and initial temperature were
These data indicate that D-values are 0.695 min (k = 3.314/min) mostly available. Three different PEF coefficients have been pre
at 800 MPa at 108 C compared to 16.772 min (k = 0.136/min) at sented: the z(E), the specific rate constant (K) from the Hulshe
600 MPa at 90 C. The magnitudes of these D-values are similar ger model (Hulsheger and others 1981) and a similar constant (Kl
to the D-value of 12 min at 680 MPa reported in a separate inves based on the analysis by Peleg (1995).
tigation (Crawford and others 1996), even though the latter was It should be noted that the D-values Ck-values) have been
measured at ambient temperatures. From the Rovere and others determined from measurements of microbial population reduc
(1996) data, the influence of pressure on inactivation rate, z(P), tion after 1 exposure time to a given electrical field strength. The
were estimated to be 725 MPa at 93 C, 962 MPa at 100 C and parameters obtained should be considered with this limitation.
752 MPa at 108 C. The inconsistent influence of temperature on Furthermore, there is no evidence that the survivor curve during
z(P) may be associated with the limited range of temperatures exposure to a pulsed electric field is described by a first-order
and pressures used in the experimental investigation, as well as model. The parameters are presented in this report to allow for
adequacy of temperature control during data collection. more direct comparisons of the effectiveness of PEF in reducing
Recent inactivation data for C. botulinum Type E Alaska and different microbial populations, as well as to note the influence
Type E Beluga (Reddy and others 1999) indicate that their D-val ofthe media on microbial inactivation. In addition, the D-values
ues were in the same range as for C. sporogenes. The D-values for (kl provide a more direct approach to evaluating the influence of
C. botulinum Type E Alaska were lower in crab meat than in a electric field strength on the rate of microbial population reduc
buffer. The D-values for C. botulinum Type A 62-A are generally tion. As will be emphasized later in this section of the report,
higher than the values for C. sporogenes, even when considering there is a great need to better understand survivor curve shapes
the influence of temperature and pressure. The pressure coeffi for microbial populations exposed to pulsed electric fields.
cient z(P) for the Type A 62-A data was 1524 MPa. Surprisingly, The results in Table IC clearly indicate that the D-values are
this value was much higher than the z(P) values reported for C. several orders of magnitude smaller than the same parameters
sporogenes, even though data from C. sporogenes were recorded at for thermal or pressure processes. Assuming first-order kinetics
lower temperatures. through 6-12Ds, this suggests a significant advantage for PEE
An in-depth investigation of pressure inactivation of Saccha when compared to the other technologies. This assumption may
romyces cerevisiae in orange and apple juice has been reported not be valid because inactivation of 99.9% of a cell population is
by Zook and others (1999). The calculated D-values were 10.81 frequently difficult to achieve.
min (k = 0.21/min) at 300 MPa, where temperatures have been Several investigations have reported data on reduction of E.
maintained at levels between 34 and 43.4 C. These D-values coli populations exposed to PEE The highest D-values are 4500
are slightly higher than the ones reported earlier by Parish and s (k = 0.051 X lQ-2 /s) at 16kV/cmand 17.8 s (k = 12.94Xl02
others (1998). For apple juice and orange juice z(P) were 115 /s) at 70 kV/cm. Using a limited number of D-values, a z(E) of
MPa and 117 MPa, respectively. These values are much lower 41 kV/ cm has been estimated. Note that this magnitude is based
than those reported for C. sporogenes and C. botulinum. Since on less than ideal data, collected at temperatures ranging from
data for 5 different pressures have been reported by Zook and 15 to 37 C. The D-value of 4500 s, at 16 kV/cm and 37 C for E.
others (1999). the activation volumes (VJ could be estimated to coli would suggest that this microorganism is one of the more PEF
be 1.24 x 10-4 for orange juice and 1.37 x 10- 4 m3/mole for ap resistant vegetative cell populations.
ple juice. The investigations on the influence of PEF on Salmonella
In summary, the most pressure-resistant pathogenic vegeta Dublin, S. aureus and Zygosaccharomyces bailii provide only limit
tive cell populations appear to be those of E.coli 0157:H8 with a ed amounts of data. The D-values for S. aureus are very similar to
D-value of 6 min (k= 0.384/min) at 600 MPa, and S. aureus with the magnitudes for E. coli, with values of 4000 to 6000 sat rela
a D-value of 7.14 min (k = 0.323/min) at 600 MPa. The most tively low electric field strength (16 kV/cm) and temperatures of
pressure-resistant spores appear to be C. sporogenes with a D 30to 37C.
value of 16.772 min (k = 0.138/min) at 600MPa (T = 90 CJ and The data for the Listeria spp. indicate that D-values are as low
C. botulinum Type A 62-A with a D-value of 6. 7 min (k = 0.344/ as 18.8 sat 50 kV/cm for Listeria innocua and as high as 540 s
min) at 827 MPa (T = 75 C). The pressure coefficient z(P) of at 20 kV/cm for L. monocyctogenes. Since these data were mea
1524 MPa at 75 C for C. botulinum Type A 62-A constitutes an sured at relatively low temperatures (10 to 50 C), the parame
additional indication of the pressure resistance of the spore ters would indicate that Listeria is one the more resistant vegeta
populations. A recent report shows little if any inactivation after tive cell populations to a PEF treatment.
30 min of C. botulinum l 7B and Cap 9B exposure to 827 MPa at The D-values of 50-60 s (k = 3.84 to 4.61 x 10-2 I s) at 50
75 C (Larkin and Reddy 1999). kV/cm for B. cereus spores are higher than for other microbial
populations at the same field strength and temperature. TWo D
1.2.2.4. Pulsed electric field processes values (17.5 to 26.3 ms) for B. subtilis spores at the same pressure

20 JOURNAL. Of' FOOD SCIENCE-Supplement

 Table 1A-Kinetic parameters for Inactivation of microbial population tor thermal processes 0
<
Time Parameter Temperature Coefficient Temperature
...
CD
Process
Technology Microorganism Substrate
(D)
(min)
(k)
(1/min)
Z(T)
(C)
(E)
(kJ/mole) (C) ~ References ...n
Q

~
Thermal
Vegetative Cells
:,
Salmonella serovars Milk 0.018-0.56 4.113-127.9 4.4-5.6 392-499 65.6 ICMSF(1996)
ca
8.Senftenberg various foods 0.56-1.11 2.075-4.113 4.4-5.6 392-499 65.5 ICMSF(1996) ti
~
8. Typhimurium TBS + 10-42%MS 4.7 18.3 0.126-0.49 4.5-4.6 448-458 55 ICMSF(1996) ::::,
8. Senftenberg Milk chocolate 276-480 0.005-0.008 18.9 120 70-71 ICMSF(1996) n
8. Typhimurium Milk chocolate 396 1050 0.002-0.006 17.7 128 70-71 ICMSF(1996)
"O
8. Typhimurium Ground beef 2.13-2.67 0.86-1.08 57 ICMSF(1996)
8.Eastboume Milk chocolate 270 0.0085 71 ICMSF(1996) ci"
(II
Escherichia coli ATCC Dairy products 1.3-5.1 0.45-1.77 57.2 ICMSF(1996)
E.coli 0111:84 Skim/Whole milk 5.5-6.6 0.35-0.42 55 ICMSF(1996)
E. coli 0157:Hl Ground beef 4.1-6.4 0.36-0.56 57.2 Line and others (1991)
E. coli 0157:HB Ground beef 0.26-0.47 4.9-8.86 5.3 401 62.8 Line and others (1991)
Yersinia enterocolitica Milk 0.067-0.51 4.52-34.4 4-5.78 367-530 60 ICMSF(1996)
Vibrio parahaemolyticus Fish homogenate 10 16 0.144-1.05 5.6-12.4 159-352 48 ICMSF(1996)
V parahaemolyticus clam/crab 0.02-2.5 0.92-115 5.6-12.4 166-368 55 ICMSF(1996)
V cholerae crab/oyst 0.35-2.65 0.87-6.58 17-21 101-125 60 ICMSF(1996)
Aeromonas hydrophila Milk 2.2-6.6 0.35-1.05 5.2-7.7 256-379 48 ICMSF(1996)
Campylobacter jejuni Skim milk 0.74 1.0 2.3 3.11 55 ICMSF(1996)
C.jejuni Beef/Lamb/Chicken 0.62 2.25 1.0 3.72 55-56 ICMSF(1996)
Listeria monocytogenes Milk 0.22 0.58 3.97 10.47 5.5 386 63.3 ICMSF(1996)
L. monocytogenes Meat products 1.6 - 16.7 0.14 -1.44 60 ICMSF(1996)
Staphylococcus aureus Milk 0.9 2.56 9.5 224 60 ICMSF(1996)
8. aureus Meat macerate 6 0.384 60 +500 ppm nitrite ICMSF(1996)
8. aureus Pasta 3 0.768 60 aw= 0.92 ICMSF(1996)
8. aureus Pasta 40 0.0576 T = 60C, aw=0.8 ICMSF(1996)
8. aureus Phosphate buffer 2.5 0.921 60 pH= 6.5 ICMSF(1996)

Spores
Bacillus cereus various 1.5 36.2 0.064 1 .535 6.7 -10.1 95 ICMSF(1996)
Clostridium perfringens Phosphate buffer O.Q15 8.7 0.265 15.35 90 pH= 7.0 ICMSF(1996)
C. perfringens Phosphate buffer 3.15 0.731 104.4 pH= 7.0 ICMSF(1996)
C. perfringens Beef gravy 6.6 0.349 104.4 pH= 7.0 ICMSF(1996)
en Clostridium botulinum 62A Vegetable products 0.61 - 2.48 0.929 3.775 7.5 11.6 110 ICMSF(1996)
C
"O C. botulinum 62A Phosphate buffer 0.88 1.9 1.212 2.617 7.6 10 110 pH= 7.0 ICMSF(1996)
"O C. botulinum 62A Distilled water 1.79 1.287 8.5 110 ICMSF(1996)
ii> C. botulinum B Phosphate buffer 1.19 2.0 1.152 -1.935 7.7 11.3 110 pH= 7.0 ICMSF(1996)
3
(1)
::,
C. botulinum B Vegetable products 0.49 12.42 0.185 4.7 7.4 10.8 110 ICMSF(1996)
C. botulinum E Seafood 6.8 13 0.177 0.339 9.78 74 ICMSF(1996)
l0 C. botulinum E
Bacillus subtilis
Oyster homogenate
0.1%NaCI
72-100
32.8
0.023 0.32
0.0702
6.8 7.5
8.74 293
70
88 Conventional
ICMSF(1996)
Cho and others (1999)
C B. subtilis 0.1%NaCI 30.2 0.0763 9.16 282 88 Ohmic Cho and others (1999)
;:o
z
>'
C"'

~
~
0
C
(I)
n
i:i:i
z
n
lt.l
N
...I.
 Table 1B-Kinetic parameters for inactivation of microbial population for pressure processes
N Time Parameter Pressure L,
N
Coefficient 1]
t.., Process (D) (k) [z(P)) (V) Pressure Pressure
0 Technology Microorganism Substrate (min) (1/min) (MPa) (m 3 /mole) (MPa) Threshold Other References
(I)
C
:ti Pressure Vegetative Cells
(I)
z
:s,, Campylobacter < 2.5 >0.92 300 Smelt and Hellemons (1998) C
r Salmonella serovars 'ti
Salmonella Senftenberg Buffer 6 0.384 345 T=230C Metrick and others (1989)
0 S. Senftenber11 5 0.461 300 Smelt and Hellemons (1998) 'ti
"1J Salmonella Enter,tidis Meat 3 0.768 450 Patterson and others (1995) r
"1J Salmonella Typhimurium Milk 3 0.768 350 Patterson and others (1995) ct.I
0 s. v:himurium Meat 1.48 1.556 414 T=25C Ananth and others (1998) :I:
0 S. yphimurium 0.6 3.838 345 T=50C Kalchayanand and others (1998) ct.I
0
(I)
Yersinia enterocolitica
Escherichia coli
Milk 3
7.5 - 15
0.768
o. 154 - 0.307
275
300
Patterson and others ( 1995)
Smelt and Hellemons (1998) z
E. coli Milk 1 2.303 400 T=50C Gervilla and others (1997b) :-:I
0
tij
z
E.coli
E. coli
E. coli
Meat
Milk
Buffer
2.5
1
3
0.92
2.303
0.768
400
450
700
T=25C
Patterson and Kilpatrick (1998)
Gervilla and others (1997a)
Patterson and others (1995)
...
:,
0
t:IJ E. coli 0157:Hl Milk 3 0.768 400 T=50C Patterson and Kilpatrick ( 1998) !.
I E. coli 0157:HB
E. coli 0157:Hl
6
0.7
0.384
3.29
600
345 T=50C
Smelt and Hellemons (1998)
Kalchayanand and others (1998)
n
-
(/) Ill
C Staphylococcus aureus 150 0.015 400 Smelt and Hellemons (1998) 0
"O S. aureus Milk 2.5 0.92 500 T=50C Patterson and Kilpatrick (1998)
"O
(D S. aureus Meat 3 0.768 500 T=50C Patterson and Kilpatrick ( 1998) :i:
3 S. aureus 7.9 0.292 500 Smelt and Hellemons (1998) n
(D

-
::,
S. aureus
S. aureus
S. aureus 582
Buffer
7.14
3
0.6
0.323
0.768
3.838
600
700
345 T-50C
Smelt and Hellemons (1998)
Patterson and others (1995)
Kalchayanand and others (1998)
aO'
Listeria monocytogenes
Milk
1.48 - 13.3 0.173 - 1.556
0.768
350
375
101 strains Smelt and Hellemons (1998) c
L. monocytogenes 3 Patterson and others (1995)
L. monocytogenes Meat 2.17 1.061 414 T=25C Ananth and others (1998) :,
L. monocytogenes ScottA Meat 3.5 0.658 400 T=Amb. Mussa and others (1999) 0
L. monocytogenes 5.0 - 15 0.154 - 0.461 400 Smelt and Hellemons(1998) !l
L. monocytogenes
Listeria innocua
< 2.5
3
> 0.92
0.768
500
450 T=20C
Smelt and Hellemons(1998)
Ponce and others(1998)
<
L. monocytogenes
Eg3s
Groun Pork 1.89 - 4.17 0.552 - 1.219 414 T=25C Murano and others (1999) 9.
L. monocytogenes Ground Pork 0.37 - 0.63 3.656 6.224 414 T=50C Murano and others (1999) 0
::,
L. monocytogenes ScottA 4 0.576 345 T=50C Kalchayanand and others (1998)
Pseudomonas fluorescens
P. fluorescens
Milk
Milk
1
1
2.303
2.303
300
400
T=50C
T=10C
Gervilla and others ( 1997b)
Gervilla and others (1997b)
o'
...
P. fluorescens 0.6 3.838 345 T=50 Kalchayanand and others ( 1998) )II
Spores ::;
Clostridium sporogenes 12 0.192 680 Crawford and others (1996) (D
C. sporogenes
C. sporogenes
16.772
6.756
0.138
0.341 725 (90C)
600
700
T=90C
T=93C
Rovere and others ( 1996b) 3
C. sporogenes 5.306 0.434 800 T=93C 9.
C. sporogenes 3.502 0.658 600 T=100C <
(D
C. sporogenes 3.186 0.723 962 (100C) 700 T= 100C
C. sporogenes 2.857 0.806 800 T=98C "IJ
C. sporogenes 1.282 1.796 600 T=108C Rovere and others (1996b) 0
0
C. sporogenes
C. sporogenes
Clostridium botulinum Type E Alaska Buffer
0.901
0.695
8.77
2.556
3.314
0.263
752 (108C) 700
800
758
T= 108C
T= 108C
T=35C Reddy and others ( 1999)
,,a.
C. botulinum Type E Alaska
C.botulinum Type E Beluga
Buffer
Crab meat
2.64
3.38
0.872
0.681
827
758
T=35C
T=35C Reddy and others ( 1999)
an
Crab meat 1.64 1.404 827 T=35C (D
C.botulinum -r.re,_e E Beluga
C. botulinum t!e E Alaska Crab meat 2 1.152 758 T=35C Reddy and others ( 1999) Ill
Ill
C. botulinum ype E Alaska Crab meat 1.76 1.309 827 T=35C
C.botulinum Type A 62-A Buffer 13.21 0.174 414 T=75C 5"
C.botulinum Type A 62-A Buffer 12.6 0.183 551 T=75C IC
C.botulinum Type A 62-A Buffer 10.59 0.218 1524 4.39x10-6 689 T=75C Reddy and others ( 1999) 'ii}
C.botulinum Type A 62-A Buffer 9.19 0.251 758 T=75C n
C.botulinum Type A 62-A Buffer 6.7 0.344 827 T=75C -::r
Yeast ::,
Saccharomyces cerevisiae orange juice 10.81 0.21 300 T=34C Zook and others (1999) 0
2.8
0.97
0.82
117 1.241X10-4
350 T=36.8C 5
2.37 400 T=37.2C IC
0.5
0.18
4.61
12.79
450
500
T=39.7C
T=43.4C
iD
Ill
S. cerevisiae apple juice 9.97 0.231 300 T=34C Zook and others ( 1999)
0.88 2.617 115 1.371X10-4 400 T=37.2C
0.28 4.798 450 T=39.7C
0.15 15.35 500 T=43.4C
S. cerevisiae 1.27 1.813 350 pH=3.7 Parsih and others (1998)
S. cerevisiae 0.067 34.373 500 pH=3.7
 Table 1C-Klnetlc parameters for Inactivation of mlcroblal population for PEF p ~ s 0
<
Process Microorganism Substrate Time Parameter PEF Coefficient Field Other R~ ...
(D
Technology
(D) {k) [Z(E)] (K)
Strength
...

Q
0
(microsec) (x 10-2/microsec) (kV/cm) (kV/cm) (kV/cm)
2:
Pulsed Electric Fields Vegetative Cells ::J
Escherichia coli
Skim milk 38.41044.8 5.14 to 6.0 20 -45 T=15C Martin-Belloso and others (1997b)
cc
E.coli
SMJF 17.8 12.94 70 T=20C Zhang and others (1995a) ti
E.coli
Milk 333 0.692 22 Grahl and others (1992) :::i
::J
E.coli
SMJF 4000 to 4500 0.051 to 0.058 16 T=37C Pothakamury and others (1995) n
E.coli
Buffer 75 to 100 2.3to 3.07 T<30C Hulsherger and Nieman (1980)
E.coli
Phosphate buffer 270 0.853 -41 6.3to 8.1
20
20 T=20C Hulsheger and others (1983)
'O
E.coli
0.1%NaCI 100 2.3 19.5 T=20C Sale and Hamilton (1967) i"
(II
E.coli
Phosphate buffer 2 115.15 40 Matsumoto and others (1991)
E.coli
Potato dextrose 161032 14.39 40 T= 15C Zhang and others (1994b)
E.coli
Skim milk 641096 2.4to3.6 40 T= 15C Zhang and others (1994b)
E.coli
Skim milk 27.4 to 49.6 4.64108.41 50 T<30C Qin and others(1995c)
E.coli
SMJF 26.7 8.63 50 T<30C Qin and others(1995c)
Salmonella Dublin
Skim milk 4to42.4 0.054 to 0.52 151040 T=15-40C Sensoy and others (1997)
S.Dublin
Milk 360 0.64 36.7 T=63C Dunn and Pearlman (1987)
Salmonella Typhimurium
NaCl 4 57.58 83 Gupta and Murray (1989)
Listeria monocytogenes (Scott A)
Milk 150 to 200 0.012 to O.Q15 30 T = 10to50C Reina and others (1998)
L. monocytogenes Phosphate buffer 540 0.426 6.4 to 6.5 (2 to 2.8) 20 Hulsheger and others (1983)
Listeria innocua Skim milk 76.9 2.995 50 T=15to28C Fernandez and others (1999)
L. innocua Skim milk 26.7 8.625 50 T=22to34C Calderon-Miranda (1998)
L. innocua Liquid Whole Egg 18.8 12.25 50 T=26to36C Calderon-Miranda (1998)
Staphylococcus aureus SMJF 4000 to 6000 0.038 to 0.058 16 T=37C Hulsherger and others (1983)
S. aureus SMJF 4000-4500 0.052 to 0.058 16 T<30C Pothakamury and others (1995)
S. aureus Phosphate buffer 360 0.64 2.6 (2.0) 20 Hulsherger and others (1983)
Lactobacillus delbrueckii SMJF 2000-2400 0.096 to 0.115 16 T<30C Polhakamury (1995)
Lactobacillus delbrueckii Buffer 1022 0.225 (1.6) 25 T=60C Jayaram and others (1992)
Pseudomonas fluorescens Skim milk 22.2 10.374 50 T= 15to28 C Fernandez and others (1999)
Pseudomonas auriginosa Phosphate buffer 308.6 0.746 6.3 (1.8 to 2.6) 20 Hulsheger and others (1983)
P. fluorescens Water 3.3 69.79 10 T=20C Ho and others (1995)
Klebsiella pneumoniae Phosphate buffer 360 0.64 6.6 20 Hulsheger and others (1983)
Spores
Bacillus cereus 0.15%NaCI 501060 3.84104.61 50 T=25C Marquez and others (1997)
en Bacillus subtilis 0.15%NaCI 17.51026.3 8.76 to 13.16 50 T=25C Marquez and others (1997)
C
"O B. subtilis SMJF 2500103000 0.077 to 0.092 16 T<30C Pothakamury (1995)
"O B. subtilis Pea soup 11.3 20.38 -15.5 33 T <5.5C Vega-Mercado and others (1996a)
ii>
3 B. subtilis SMJF 42510520 0.44to0.54 16 Qin and others (1994)
a, Yeast
::,
Saccharomyces cerevisiae NaCl 61.5 3.745 35 Jacob and others (1981)

l0 S. cerevisiae
S. cerevisiae
Phosphate buffer
Water
270
4666
0.853
0.049
(2.3) 20
20
Hulsheger and others (1983)

Mizuno and Hori (1988)

C S. cerevisiae Potato dex1rose 8.7 26.47 40 T= 15C Zhang and others (1994b)

::ti
,..z
r-
S. cerevisiae
S. cerevisiae
Apple juice
Apple juice
102.9 to 135
42.9 to 428.6
1.706 to 2.238
6.537 to 5.368
-17 12
25
T=4-10C
T<30C
Zhang and others (1994a)

Qin and others (1995a)

S. cerevisiae Apple juice 0.83 ' 277.47 50 T=22to29C Qin and others (1995a)

~ Candida albicans Phosphate buffer 240 0.96 2.2 (1.2to3.1) 20 Hulsheger and others (1983)

Zygosaccharomyces bailli Juices 0.4 to 0.7 3.29 to 5.76 32 to 36.5 T=20C Raso and others (1998)

~
0
0
<I)
n
iii
:z
n
l:IJ
N
w
JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
and from 2 different investigations were considerably lower than al population of interest in food safety.
the D-values for B. cereus spores. Using the D-values for B. subti
lis spores at 3 different electrical field strengths and within an 2. Microbiological Critical Factors
ambient temperature range, a z(E) of 15.5 kV/cm has been esti
mated. Unexpectedly, this magnitude is much lower than the
one estimated for vegetative cell populations (that is, E. coli with
T he efficacy of a preservation technology is influenced by a
number of microorganism-related factors that are generally
independent of the technology itself. These include the type
a z[E] of 41 kV/cm). These observations need more comprehen and form of target microorganism; the genus, species and strain
sive investigation before any conclusions are reached. of microorganism; growth stage; environmental stress selection
Several investigations have reported data on inactivation of S. mechanisms; and sublethal injury. Each of these factors influ
cerevisiaewhen exposed to PER Overall, the D-values vary signifi ences the resistance of a microorganism to a preservation pro
cantly depending on the electric field strength and temperature. cess, independently of the apparent inactivation capacity of that
In general, the magnitudes are larger than E. coli, lower than L. particular process.
monocytogenes and much less than B. subtilis spores. An z(E) of Among the food microbial hazards, bacteria are generally the
17 kV/ cm has been estimated from data reported for PEF treat most resistant microorganisms of concern and therefore should
ments of S. cerevisiae in apple juice, much lower than the value be the primary targets in most preservation processes. In most
estimated for E. coli (41 kV/cm) and similar to the one of B. subti cases, microorganisms other than bacteria will be destroyed be
lis spores (15.5 kV/cm). fore or concurrently with pathogenic and spoilage bacteria; how
The influence of electrical field strength (E) on the rate of mi ever, in designing processes to inactivate all pathogens, it is also
crobial population inactivation may also be estimated from the advisable to consider the resistance properties in foods of other
coefficient (K). These parameters have been reported for a limit microorganisms such as yeasts, molds, parasites and protozoa,
ed number of microbial populations. Among them, the popula that may persist in or grow in foods.
tions with greater resistance to PEF would include Escherichia A few genera of foodbome bacteria (for example, Clostridium
spp., Listeria spp., Pseudomonas spp. and Klebsiella spp. The coef spp. and Bacillus spp.) are capable of existing in 2 forms: active
ficient z(E) was highest for Escherichia spp., which was higher vegetative cells and dormant spores. These 2 forms often differ in
than the one for B. subtilis spores. Data are insufficient to make their resistance properties to heat, chemicals, irradiation and oth
valid comparisons of the relative resistance for vegetative and er environmental stresses. In that same manner, studies have
spore populations to PER shown that spores are typically more resistant than vegetative
In summary, the survivor data for microbial populations ex cells to the alternative processing technologies evaluated in this
posed to PEF are too limited to be used in reaching definite con report. For pasteurization purposes, one is mostly concerned with
clusions about the magnitude of the kinetic parameters. In addi the inactivation of vegetative cells of disease-producing microor
tion, data are not adequate to calculate parameters to compare ganisms. In order to have a commercially sterile product, however,
the relative resistance of various microbial populations to PER one must devise a process that inactivates all microbial spores
For instance, data based on the same field strength and temper (usually targeting spores of C. botulin um) capable of germinating
ature are lacking. In addition, only a few of the published reports and growing in the food under normal storage conditions.
provide information on the threshold field strengths needed to Differences in resistance of microorganisms may be found
initiate inactivation. not only between genera and species but also between strains of
the same species. For instance, some bacterial strains with
1.3. Future Research Needs unique resistance to thermal inactivation, irradiation and high
This section focuses on the research needs associated with ki pressure processing have been identified. It is possible that, in
netic parameters to be used for development of food preserva the future, a pathogenic "super bug" would emerge. If this oc
tion processes to ensure safety. For several technologies dis curs, this pathogen should be considered a possible food safety
cussed in this report, the data necessary to estimate kinetic pa hazard and the process would have to be redesigned to specifi
rameters are lacking. If these technologies are to evolve to indus cally inactivate it. Alternatively, if the "super bug" is not a patho
trial applications, kinetic data must be collected in the future. gen or spoilage microorganism, it may be very useful as a possible
The following is a list of research areas that need further in surrogate during development and validation of a process. Anoth
vestigation: er factor that can affect resistance of bacteria to preservation pro
Evaluation of the adequacy of a linear first-order survivor cesses is stage of growth. It appears that cells in exponential or log
curve. Although there is evidence of various types of deviation phase of growth are generally less resistant than cells in stationary
from the historical model, a universally accepted alternative has phase. The development of stress resistance proteins in stationary
not evolved. Future research on an appropriate model would be phase may be the cause of this phenomenon.
beneficial to all preservation technologies. One of the basic principles of microbial genetics is that ex
Investigation on the influence of pressure on reduction of treme environments that would kill most bacterial cells result in
microbial populations using the proper experimental design the selection of mutants resistant to severe conditions. These en
(statistically valid, collection of data at different pressures and vironmental conditions encountered by a population of cells
control of temperature and product), so that z(P) and/or activa may induce a stress "defense mechanism" in some of them. This
tion volumes (V) are quantified. These investigations should selection process has been scientifically supported by studies
also evaluate synergistic effects between pressure and tempera suggesting that bacterial stress may induce hypermutability. Hy
ture. permutability would in tum lead to a microbial population of
Research on developing an experimental protocol for ob greater resistance (Buchanan 1997). Therefore, the exposure of
taining statistically reliable kinetic parameters to describe survi cells to some form of stress may induce and allow the survival of
vor curves for microbial populations exposed to PER These stud microorganisms with unusually higher durability to a given inac
ies should incorporate multiple levels of electric field intensity, tivation process. Mazotta (1999) found that the heat resistance of
as well as the potential for synergy with temperature. acid- or salt-adapted, heat-shocked, or starved E. coli 0157:H7
Further research on the PEF microbial inactivation models cells was higher than that of cells grown to exponential or station
presented as Eq. (11) or (12). The investigations need to provide ary phase under optimum conditions. He suggested that it
reliable kinetic parameters for these models and for the microbi would be appropriate to use stress-inducing culture conditions

24 JOURNAL OP FOOD SCIBNCB-Supplement

Overarching Principles ...
when studying the thermal resistance of vegetative pathogens in pathogens of greatest public health concern for new technologies,
specific products in order to add an extra factor of safety to the the resistance of pathogens to heat will be examined.
process. Lou and Yousef (1997) determined that sublethal stress
es to ethanol, acid, hydrogen peroxide, heat, or salt had variable 3.1. Vegetative Bacteria Inactivated by Cooking and
effects on subsequent exposure of L. monocytogenes to lethal lev Pasteurization
els of the same stressors. For example, heat shocking increased Salmonella. Bacteria of the genus Salmonella is one of the
the resistance of the microorganism to ethanol, hydrogen perox most well-known and frequently encountered pathogens in
ide and salt, but not to acid. Davidson (1999) reviewed the im foods. Approximately 2,200 serovars of Salmonella enterica sub
pact of stress induction on resistance to food antimicrobials. He sp. enterica exist and can be isolated from meats, poultry, eggs,
stated that resistance could be acquired through previous expo raw milk, water, fish, shellfish, feeds, fruits and vegetables. Be
sure or adaptation due to cross-protection from environmental or cause Salmonella serovars are natural contaminants of intestinal
processing factors including stresses such as heat or acid. A num tracts of animals, birds and reptiles, they may contaminate food
ber of studies like the ones described have demonstrated the oc and equipment through secondary contamination. Therefore,
currence of stress-induced enhanced resistance to inactivation. inactivation of this pathogen through processing and avoidance
The questions relative to process design and verification are: (1) of post-processing contamination is very important. The infec
Are the microorganisms and food environments likely to be of tious dose of this microorganism can be very low: It has been
the type involved in stress induction? (2) Would stress induced demonstrated that it may take only one cell to cause a person to
resistance possibly occur at any point in the food processing op become ill. This makes effective pasteurization critical to pro
eration? and (3) If it did, would it significantly impact the inacti duce safe food.
vation process leading to possible underprocessing? Considering Inadequate heating of foods of animal origin or cross contami
that in most food processing systems the design is to have micro nation are the primary vehicles for salmonellosis outbreaks. Meat
organisms exposed only once to a stress-inducing factor (for ex and poultry (that is, beef, turkey, chicken and pork) and home
ample, heat, acid, antimicrobials and so on), the development of made ice cream (generally due to the use ofraw eggs), fruits and
a resistant population is not likely to occur. One possible excep vegetables and salads have been the most frequently reported
tion might be the case of previously processed material that is re items (CDC 2000). Raw or improperly pasteurized milk and eggs,
processed into the streamline. In those cases, in-depth studies of as well as other foods have also been associated with salmonello
the impact of stress induction during the processing are needed. sis. Inadequate cooking or processing, improper cooling, ingestion
Another microbial-related factor that influences the effective of raw products and cross contamination of foods after cooking
ness of a process is the susceptibility of the microorganism to cel seem to be the major sources of Salmonella serovars.
lular injury. The effectiveness of an inactivation process is often The maximum growth temperature for Salmonella serovars is
measured by enumerating any surviving organisms (using bio 49.5 c. The microorganism is considered to be sensitive to heat
logical indicators or surrogates) in a selective medium. Under the and is killed easily by pasteurization of milk equivalent to
best circumstances, a processed microorganism would be either 71.7 c for 15 s. The heat resistance of Salmonella serovars de
viable or dead; however, inactivation often results in a continu pends on factors such as serovar type, water activity, pH and
um of effects with some degree of injury. Injured cells can be eas heating medium. The heat resistance of serovars in various foods
ily underestimated, resulting in misleading conclusions about is shown in Table 2. Salmonella serovar Senftenberg is generally
the efficiency of the method. The detection and enumeration of considered to be the most resistant strain (Tables 2 and 3).
injured microorganisms require special procedures. Often, injury Therefore, any heat-resistant studies using Salmonella serovars
is identified when surrogate organisms are enumerated using a should include serovar Senftenberg strain 775W, unless it is not
selective culturing medium (generally a medium containing a relevant for the application. Then it would serve only as a point
chemical inhibitor that allows growth only of the particular micro of reference for heat resistance.
organism being enumerated) in contrast to a nonselective medi Shigella. Bacteria of the genus Shigella, the causative microor
um. It is often desirable to use selective media in the field to en ganism for shigellosis, is a member of the Enterobacteriaceae. It is
sure growth of only the surrogate microorganism, and not of a gram-negative, nonsporeforming nonmotile rod. The organism
background microflora. The choice of "best" method to enumer has a growth range of 10 to 47.2 c with an optimum of 37 c. The
ate the test organism will largely depend on the experimental 2 primary foodborne pathogens are S. flexneri and S. sonnei. The
variables and the researcher's experience with field studies. microorganism is carried by humans and primates and is spread
to food by carriers and contaminated water. Shigella strains are
3. Pathogens of Public Health Concern not particularly heat resistant. Approximately 5 min at 63 C in

I n the United States, foodborne diseases caused by microor

ganisms can be attributed primarily to pathogenic bacteria,
enteric viruses and protozoa (Anonymous 1999; Carsberg 1999;
activates most strains of S. flexneri and S. sonnei. The main foods
implicated in outbreaks of Shigella spp. are salads and seafoods
that become contaminated during handling by infected workers
Jackson and others 1997; Katsuyama 1993; Varnam and Evans or by unclean and unsanitized food contact surfaces. Control of
1991). The following bacteria are known to be responsible for Shigella is best accomplished by hygiene, health education, wa
causing foodbome disease: Aeromonas hydrophila, Bacillus cereus, ter disinfection and sanitation along with mild heat treatment
Campylobacter jejuni, Clostridium botulinum, Clostridium perfrin where necessary.
gens, pathogenic Escherichia coli, Listeria monocytogenes, Salmo Pathogenic Escherichia coli. Escherichia coli is a gram-nega
nella, Shigella, Staphylococcus aureus, pathogenic Vibrio spp. and tive, motile, facultative anaerobe nonsporeforming rod. The
Yersinia enterocolitica. The viruses of concern in foods are Hepati source of the microorganism is generally the gastrointestinal
tis A, Norwalk, Norwalk-like and Rotavirus (CDC 2000; Mead and tract of warmblooded animals but it can also be found in water.
others 1999). Cryptosporidium paroum, Cyclospora cayetanensis, Gi Five to 6 types of diarrheagenic E. coli are known today, including
ardia lamblia and Toxoplasma gondii are all parasites of concern, in enteropathogenic, enterotoxigenic, enteroinvasive, enterohem
part because they produce resistant cysts. When exploring the orrhagic, enteroadherent and enteroaggregative. These strains
new preservation technologies, their preservation level should be may cause neonatal, infantile, traveler's, or bloody diarrhea.
compared to that of classical pasteurization or commercial steril Some produce toxins while others are invasive. Enterohemor
ization technologies. Therefore, in an attempt to determine the rhagic E. coli (EHEC) causes a sequela called hemolytic uremic

Supplement-JOURNAL Of' FOOD SCIENCE 25

.JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies
syndrome. Foods implicated in outbreaks of EHEC include immune systems, including pregnant women, neonates, the eld
ground beef, roast beef, alfalfa sprouts, raw milk, apple cider, erly and persons immunosuppressed by medications. Manifes
meat sandwiches, mayonnaise, lettuce and dry salami. Food pro tations of listeriosis include abortion, perinatal septicemia and
cess inactivation of this bacterium is best accomplished by: 1) meningitis. The mortality rate associated with listeriosis is ca.
adequate cooking of all meat products to a center point tempera 30% (Rocourt and Cossart 1997; V.J. Scott, personal communica
ture of 165-180 F and 2) a professional sanitation program in tion). Although rarely described, L. monocytogenes can grow to
place to inactivate the bacteria and prevent post-processing con high populations in temperature-abused food resulting in se
tamination or cross-contamination of processed food with raw vere gastroenteritis after consumption. Listeria monocytogenes is
product. The heat resistance of E. coli is equivalent to or slightly truly ubiquitous and can survive for long periods of time under
lower than Salmonella serovars (Table 4). Therefore, a heat pro extreme and adverse conditions. Listeria monocytogenes can mu\
cess sufficient to inactivate Salmonella serovars will also likely in tiply in foods stored at refrigeration temperatures so risk may in
activate E. coli. crease during storage. It has been found in raw milk, raw milk
Yersinia enterocolitica. Yersinia enterocolitica is a pathogen cheese, soft-ripened cheeses, raw meats and seafood. There
that causes a foodborne infection with an onset time of 3-7 d. have been cases of illness from coleslaw and other raw vegeta
The symptoms of yersiniosis include severe abdominal cramps bles that have been fertilized with animal manure or wastewater,
which mimic appendicitis, watery diarrhea, vomiting and fever. and then not rinsed and cleaned prior to preparing and eating.
Pork and pork products, milk and foods washed in contaminated Recently, an outbreak of listeriosis caused by L. monocytogenes
water (for example, tofu) have all been implicated in outbreaks. serotype 4b resulted in 50 cases and 8 deaths linked to consump
Cross contamination can also cause a problem in ready-to-eat tion of hot dogs and/ or deli meats (CDC 1998). Listeria monocy
foods. Yersinia enterocolitica, as a psychrotroph can grow at refrig togenes may be controlled in food processing plants with a good
eration temperatures. In fact, cold storage can be selective for sanitation program and prevention of cross-contamination be
the microorganism. Yersinia enterocolitica has very low heat resis tween raw and finished product. In addition, heating equivalent
tance in milk (Table 5). to milk pasteurization (71. 7 C for 15 s) or heating to 62.8 C for
Vibrio. Three species of Vibrio are potential pathogens in 30 min or above should inactivate the microorganism in milk or
food: V. cholerae, V. parahaemolyticus and V. vulnificus. All are other foods (Tables 9 and 10).
found in the marine environments and contaminate foods via
contaminated water. Foods associated with Vibrio spp. foodbome 3.2. Vegetative Bacteria Inactivated by Pasteurization
infections include seafoods, raw vegetables, milk and inade but Able to Produce a Heat-stable Toxin
quately sanitized water. Keeping raw product at low tempera Staphylococcus aureus. Staphylococcus aureus can produce a
tures prior to processing helps to slow growth, and heating above toxin in improperly stored food that, if ingested, will produce
60 C should easily inactivate this heat-sensitive organism (Ta mild to severe symptoms of nausea, cramps, vomiting, diarrhea
ble 6). and prostration in 2-7 h, lasting 1 to 2 d. The enterotoxins pro
Aeromonas hydrophila. Aeromonas hydrophila has many duced by S. aureus are resistant to heating (up to a Duoc = 10
pathogenic properties resembling V. vulnificus, that is, gastroen min as measured by bioassays), including low-acid canned food
teritis in healthy individuals or septicemia in individuals with processing. Many healthy people harbor S. aureus. It can be
underlying chronic disease (for example, leukemia, carcinoma found in the nose, throat, hands, fingertips, hair and skin. Any
and cirrhosis) and those treated with immunosuppressive drugs food that is contaminated with the organism and supports
or who are undergoing cancer chemotherapy or with impaired growth can potentially develop this bacterial toxin. Proteina
immune systems. Infections among healthy people are generally ceous foods (for example, chicken, turkey, meat, fish, dairy prod
self-limiting whereas children are at the greatest risk. Species of ucts, salad vegetables, ham). potatoes, cream-filled products
A. hydrophila are ubiquitous in freshwater environments. Al and cream sauces are commonly involved in outbreaks. As the
though A. hydrophila can be isolated from a wide range of foods microorganism does not compete well in mixed populations, it is
at the retail level, outbreaks are generally small. The organism is generally not a problem in unheated foods; however, when other
a well-established component of raw meat spoilage and is found naturally occurring bacteria are killed by cooking or inhibited
on beef, pork, lamb, poultry, fish and shellfish. It is also a com from growth and S. aureus is later introduced by humans, it sur
mon component of raw milk and raw vegetables. Aeromonas hy vives and grows. Consequently, it may be found in prepared
drophila is eliminated by mild heat treatments (Table 7). foods such as salads, custards and cream-filled products. Sta
Campylobacter jejuni. Campylobacter jejuni is the leading phylococcus aureus is also resistant to low water activities and
cause offoodbome illness in humans in the United States (CDC survives curing solutions that contain salt or sugar. The cells of
1999). The organism causes a diarrheal infection but can also the microorganism are not heat resistant (Table 11) and should
have a more severe sequela known as Guillain-Barre Syndrome easily be killed by any mild heat treatment. Staphylococcus au
(0.2 to 2 cases/ 1000 cases of C. jejuni; paralysis, demyelination of reus is best controlled by preventing contamination.
nerves). The microorganism is generally unable to grow in foods;
however, it often finds entry to food via human carriers or con 3.3 Sporeforming Bacterial Organisms That Survive
tamination. In heat-treated or dehydrated foods, contamination Cooking and Pasteurization and Produce Toxin
may not be a problem, but raw refrigerated foods of animal origin Bacillus cereus. Bacillus cereus is a sporeforming organism that
can be a source. The organism can be isolated from all common produces 2 types of illness: the diarrheal syndrome, which devel
food animals and birds. Foods commonly associated with infec ops within 20 h following ingestion, or the emetic (vomiting) re
tion include raw milk, poultry, red meat and contaminated water sponse, which occurs 1 to 5 h after ingestion. The illnesses are
sources. The microorganism is extremely sensitive to heat and the result of toxins associated with growth of the microorganism
would be inactivated at temperatures as low as 55 C (Table 8). in foods (emetic) or the gastrointestinal tract (diarrheal). The di
Listeria monocytogenes. Listeria monocytogenes is the cause of arrheal (enterotoxin) is produced during exponential growth in
a foodbome illness known as listeriosis. There are 13 serovars of the gastrointestinal tract, while the emetic toxin is produced by
pathogenic L. monocytogenes, but according to Raccourt and Cos cells growing in the food product (Granum 1997). Dairy products,
sart (1997), 95% of human isolates are serotypes l/2a, l/2b and cereals, meats and fried rice are commonly the foods involved in
4b. The microorganism often attacks persons with suppressed foodbome illness. Since the microorganism does produce spores,

26 JOURNAL. Of' POOD SCIBHCB-Supplement

Overarching Principles ...
it is considered resistant to at least pasteurization conditions. In 3.5 Enteric Viruses That Can Cause Foodborne
fact, the spores of B. cereus have D95c values ranging from 1.5 to Infection from Unpasteurized Foods
36.2 min (Table 12). One thing that is apparent concerning the Hepatitis A virus, Rotavirus and Norwalk virus. Several out
heat resistance of B. cereus spores is how variable their heat resis breaks offoodborne illness have been attributed to the viral con
tance is in the same food product. It is generally thought that B. tamination of shellfish and of unprocessed fruits. Hepatitis A vi
cereus do not survive the low-acid canned food process. For in rus and other enteric viruses may be found in shellfish taken
stance, using the highest z(T) (10.1) and D-value (36.2) in Table from waters polluted by sewage. Fruits grown in fields where hu
12, the D121 c is 5.8 s, which confirms that this heat susceptibility man waste or sludge is used as fertilizer have the potential for
is the case (ICMSF 1996). contamination by enteric viruses. Foods most vulnerable to viral
Clostrldium perfringens. Clostridium perfringens food poison contamination would be those not receiving a heat pasteuriza
ing is the result of an enterotoxin produced in the gastrointesti tion step.
nal tract by C. perfringens. After ingestion, the microorganisms
multiply and sporulate in the small intestine, releasing the en 4. Surrogate Org.t!lisms to Validate Processing
terotoxin and causing symptoms including abdominal cramps Parameters
and diarrhea (McLane 1997). Meat and poultry are the most com
mon foods associated with C. perfringens food poisoning. Food 4.1. Thermal, electrothermal and nonthermal food
borne illness caused by this microorganism is generally the result processing
of poor refrigeration and inadequate reheating of cooked foods. The establishment of traditional thermal processes for foods
Spores are often found on raw meats and may survive cooking of has been based on 2 main factors (Anonymous 1989): 1) knowl
beef or poultry. If foods are inadequately cooled, the spores may edge of the thermal inactivation kinetics of the most heat-resis
then germinate and outgrow. If the food is then inadequately re tant pathogen of concern for each specific food product and 2)
heated, cells may continue to grow and reach large numbers. In determination of the nature of heat transfer properties of the
gestion of large numbers of organisms is necessary both for the food system, generally defined by a heat transfer rate. These 2
microorganism to survive passage through the stomach and to factors are used to calculate the scheduled process, thereby en
initiate growth and toxin production in the intestines. As can be suring inactivation of pathogen(s) in that product. The validity
seen in Table 13, the D-value of C. perfringens spores at 98.9 C of the established process is often confirmed using an inoculated
may be as high as 31.4 min in beef gravy. Therefore, a low num test pack study. An inoculated pack study would be tested under
ber of spores could potentially survive cooking of a meat in actual plant conditions (this includes processing and control
sauce; however, the preferred method of control of this microor equipment, product and packaging) to reproduce the process in
ganism is not necessarily initial heating but rather adequate every detail. Since it is unwise to introduce viable pathogens into
cooling and adequate reheating following cooling to inactivate the production area, surrogate organisms are often utilized in the
any cells produced during cooling. inoculated pack study, and their inactivation is measured to vali
Clostrldium botulinum. Clostridium botulinum is a common date the process. Surrogates play an important role as biological
soil bacterium that produces heat-resistant spores. This organ indicators that can mimic the thermal inactivation properties of a
ism produces a potent neurotoxin that may be toxic to both hu pathogen and can help to detect peculiarities or deviations in the
mans and animals. The toxin is considered heat-labile and can processing procedure.
be inactivated by heating to 80 C for 10 min. When ingested, the One of the challenges in using new processing technologies
toxin is absorbed and irreversibly binds to peripheral motor for food preservation and pathogen inactivation is to determine
nerves causing paralysis and possible death without antitoxin if traditional methodologies can be used to establish and vali
treatment. Vegetables can carry heat-resistant Type A, B, and F date the new process. For practical purposes, the mechanism of
Clostridium botulinum spores that are a major concern in low-acid microbial inactivation under electrothermal processes is basical
canned foods. Type E spores also can be found in fish and seafood ly the same as under conventional thermal processes: that is,
products. The heat resistance as measured by D-values of C. botu heat inactivation. Thus, the 2 factors described above, which are
linum Types A and proteolytic B spores generally ranges from 0.6 well established for thermal processes (Anonymous 1996),
to 3 min at 110 C (Tables 14 and 15). A comparison of Type A and should be used as a basis for establishing and validating sched
B spores in similar products is shown in Table 16. Clostridium botu uled electrothermal processes. It is also appropriate to use surro
linum Type E spores are much less resistant than Type A or B and gate organisms to assist in determining and validating the pro
can be inactivated at or below 100 C (Table 17). cess effectiveness. Regarding other preservation processes not
based on heat inactivation (that is, high pressure, pulsed electric
3.4. Cyst-producing Protozoa That Can Remain field, pulsed light), nonpathogenic surrogates still need to be
Infectious in Unpasteurized Foods identified and their significance evaluated. To accomplish this,
Cryptosporidium and Cyclospora. The protozoa, Cryptospo more research needs to be done in the area of inactivation kinet
ridium parvum and Cyclospora cayetanensis, are not able to ics of pathogens by new technologies as well as in the identifica
replicate in foods, but they do produce cysts that can remain tion of nonpathogenic candidates useful as surrogate organisms.
infectious in foods for extended periods of time. Since these
organisms appear to have a low infective dose, their presence 4.2. Importance of Surrogates
can contribute to infection, causing diarrhea in the general Surrogate organisms are invaluable in confirming the efficacy
population. These protozoa may contaminate water systems of thermal-based processes. Their use, as opposed to using actu
since the cysts have a high tolerance for disinfectants, such as al pathogens, derives from the need to prevent the introduction
chlorine. Washing food with contaminated water can infect of harmful organisms into the production facility area. The con
foods with cysts. Thermal resistance values for Cryptosporidi sequences of mishandling a pathogen in the presence of work
um oocysts of D60 c of 20 sin distilled water and D71 _7 c of <l s ers, product and equipment (from safety to legal liability issues)
have been reported in milk. According to Rose and Slifko could be devastating. Therefore, the use of surrogates by pro
(1999), the heat resistance of Cyclospora may be similar to that cessing companies is of great importance to ensure microbiologi
of Cryptosporidium (Table 18). cal safety of the process. For instance, surrogates have been used
for many years in the low-acid canning industry to establish and

Supplement-JOURNAL OF POOD SCIBNCB 27

J.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
validate the destruction of C. botulinum spores. The use of non Pathogens of public health significance in foods are vegeta
pathogenic spores of the putrefactive anaerobe C. sporogenes, or tive cells of both gram-positive and gram-negative organisms as
spores of the flat-sour thermophilic organism Bacillus stearother well as protozoan cysts. These organisms are inactivated fairly
mophilus as surrogates for C. botulinium, have helped the indus rapidly at pasteurization temperatures and are not good candi
try develop processes that ensure products are safe and com dates as surrogates. Thermoduric lactic acid bacteria are also
mercially sterile. present in many foods. These organisms may survive the process
and should be evaluated for their possible value as surrogates.
4.3. Criteria for Surrogates They include the lactic streptococci (Streptococcus thermophilus),
The ideal surrogate would be the pathogen (or target organ the lactobacilli (Lactobacillus delbrueckii spp., Lactobacillus bul
ism) itself that had been transformed into a nonpathogenic form garicus, Lactobacillus lactis) and Pedioccocus spp. Other related
using genetic engineering techniques. Such an approach to surro lactic acid bacteria to consider as possible surrogates would in
gate selection is generally not followed due to possible reversion to clude strains of Lactococcus and Leuconostoc. In cases where List
pathogenicity or possible detection of false positives during rou eria monocytogenes is the pathogen of interest, strains of Listeria
tine testing. Generally, surrogates are selected from the popula innocua have served as nonpathogenic surrogates. In addition,
tion of well-known organisms that have well-defined characteris nonpathogenic strains of E. coli have served as surrogates for E.
tics and a long history of being nonpathogenic. In selecting surro coli 0157:H7. In cases such as these, where surrogates are uti
gates, the following microbial characteristics are desirable: lized, it should be proven that the surrogates are suitable for use
Nonpathogenic. based upon the above criteria.
Thermal or other inactivation characteristics that can be
used to predict those of the target organism. 4.5. Surrogates for Low-acid Canned Food Products
Durability to food and processing parameters similar to tar Methodologies for validating low-acid-canned food (LACF)
get organism (for example, pH stability, refrigeration stability, ox processes have been in existence for quite some time. The regu
ygen tolerance and so on.). latory agencies require that scheduled processes for LACFs be
Stable thermal and growth characteristics that are similar established by a person or organization having expert knowledge
from batch to batch. of thermal processing requirements for foods packaged in her
Easily prepared into high-density population forms. metically sealed containers. The biological validation of an elec
Once prepared, population is constant until utilized. trothermal process such as ohmic heating or inductive heating
Easily enumerated using rapid and inexpensive detection may be designed and performed following conventional heating
systems. biological validation procedures; however, the mode of heat gen
Easily differentiated from other natural flora. eration, heat distribution and location of coldest point(s) need
Follows inactivation kinetics in a manner similar to patho special considerations when validating an electrothermal pro
gens receiving the same inactivation treatment. cess and cannot be extrapolated from conventional thermal pro
Genetically stable so results can be reproduced indepen cesses, as will be described in the subsequent sections of this re
dently oflaboratory or time of experiment. port. These issues need to be investigated by experts in electro
Will not establish itself as a "spoilage" organism on equip thermal processes.
ment or in the production area. Where novel nonthermal processes are being investigated,
Not susceptible to injury or reversible inactivation proper the application of traditional and classical approaches, such as
ties. the use of the formula described by C.O. Ball in the 1920's, may
Ideal surrogates, with all of the features described above, are not be applicable. The approaches to process development for
scarce. Generally, surrogates will have many of the criteria, as is novel processes may initially be mostly empirical and strongly
the case with the traditional surrogates used in low-acid canned supported by biological validation until the nature of the kinet
foods processing validation. ics of inactivation is more fully understood and hence predict
able. It remains to be seen if the use of organisms like C. sporo
4.4. Surrogates for Pasteurized Products genes or B. stearothermophilus will be acceptable surrogates for C.
Rather than using biological indicators as a basis for process botulinium in many of these novel nonthermal processing appli
validation, pasteurization processes have traditionally been cations. As will be described in the following sections of this re
evaluated and monitored using enzymatic destruction. Milk pas port, future research needs to address the resistance of patho
teurization has relied on the inactivation of the naturally occur gens of concern and the identification of appropriate surrogates
ring phosphatase enzyme as confirmation that product has re for the specific nonthermal processes.
ceived the proper heat treatment. This approach is not quantita
tive and is specific to pasteurization of milk. To obtain quantita 4.6. Other Considerations
tive information to support the development and validation of The use of surrogate organisms to determine and validate
thermal processes, the use of bacterial surrogates is preferred to processes for electrothermal processes will be challenging, espe
the use of naturally occurring enzymes. Research, however, is cially for pasteurization processes. The following are some fur
progressing on the identification and use of proteins and en ther points to consider while undertaking this endeavor:
zymes with inactivation kinetics comparable to microorganisms Keep the approach as easy, accurate, and simple as possi
of concern, and there is a great potential in using them as chemi ble.
cal indicators. Design the process so that the surrogate exhibits a predict
Selection of surrogate organisms for pasteurization of prod able time-temperature profile that correlates to that of the target
ucts is a relatively new task for food scientists. The literature ba pathogen.
sically lacks information on recommendations for useful surro Be attentive to the introduction of system modifications or
gate organisms. Therefore, a good deal of research and develop variables, which could alter the heat-transfer properties of the
ment may be required for progress to be made. Efforts are need food leading to inaccurate results (for example, thermocouple
ed to identify and establish surrogates that meet many of the cri probes, changing heating rates, nutrients added to the product
teria listed above and can be utilized in process development for for surrogate growth, altering viscosity and so on).
pasteurized foods. Validate the susceptibility or tolerance of a surrogate, if it is

28 JOURNAL. OP FOOD SCIENCE-Supplement

Overarching Principles
Line, J. E., Fain, A. R., Moran, A. B., Martin, L. M., Lechowich, R. V., Carosella, J. M. and
known. Brown, W. L 1991. Lethality of heat to escherichia coli 0157:H7: D-value and z-value
When first developing a process, working with a mixture of determinations in ground beef. I Food Protect. 54:762-766.
potential surrogate strains may be useful in narrowing the pa Lou, Y. and Yousef, A. E. 1997. Adaptation to sublethal environmental stresses protects
listeria monocytogenes against lethal preservation factors. Appl Environ Microbial.
rameters toward establishing an effective process. 63(4):1252-1255.
Marquez, V. O., Mittal, G. S. and Griffiths, M. W.1997. Destruction and inhibition of bacterial
spores by high voltage pulsed electric field. I Food Sci. 62(2):399-401.409.
References Martin-Belloso, 0., Qin, B. L., Chang, F. J., Barbosa-Canovas, G. V. and Swanson, B. 1997b.
Alpas, H., Kalchayandand, N., Sikes, T., Dunne, C. P. and Ray, B. 1994. Hydrostatic pressure Inactivation ofEscherichia coli in skim milk by high intensity pulsed electric fields. I Food
among strains of foodborne pathogens. Applied and Environmental Microbiology. Process Eng. 20:317 -336.
65(9):4248-4251. Matsumoto, Y., Satake, T., Shioji, N. and Sakuma.A. 1991. lnactivation ofmicroorganisms by
Ananth, V., Dickson, J. S., Olson, D. G. and Murano, E.A. 1998. Shelf-life extension, safety and pulsed high voltage applications. Conference Record of IEEE Industrial Applications
quality of fresh pork loin treated with high hydrostatic pressure. I Food Protect. Society Annual Meeting. 652-659.
61(12):1649-1656. Mazotta, A. S. 1999. Problems and solutions to development of pathogen resistance to
Anderson, W. A., McClure, P. J., Baird-Parker, A. C. and Cole, M. B. 1996. The application of thermal processing. ISSI Meeting.
a log-logistic model to describe the thermal inactivation of clostrldium botulin um at 2138 Mclane, B. A. 1997. Clostridium perfringens. M. P. Doyle, L. R. Beauchat and T. J. Montville
attemperatures below 121-1 'C. J Appl Bacterial. 80:283-290. (Eds.). Food Microbiology: Fundamentals and Frontiers. Washington, DC. American
Anonymous. 1989. Canned Foods: principles of thermal process control, acidification and Society for Microbiology.
container closure evaluation. Washington, DC. The Food Processors Institute. Fifth Mead, P. S., Slutsker, L. Dietz, V., McCaig, L. F., Breese, J. S., Shapiro, C., Griffin, P. M. and
Edition. Anonymous. 1996. Thermal processes for low-acid foods in metal containers. Tauxe, R. V. 1999. Food-related illness and death in the United States. Emerging Infectious
Washington, DC. National Food Processors Association. Bulletin 26-L 72-85. Diseases. 5:607-625.
Anonymous. 1999. U.S. food & drug administration center for food safety and & applied Metrick, C., Hoover, D. G. and Farkas, D. F. 1989. Effects of high hydrostatic pressure on
nutrition foodborne pathogenic microorganisms and natural toxins handbook [Bad Bug heat-resistant and heat-sensitive strains of Salmonella. I Food Sci. 54:1547-1564.
Book). 2000. http://vm.cfsan.fda.gov/list.html. Mizuno, A. and Hori, Y. 1998. Destruction ofliving cells by pulsed high-voltage application.
Arabshahi, A. and Lund, D. B. 1985. Considerations in calculating kinetic parameters from IEEE Trans Ind Appl. 24(3):387-394.
experimental data. I Food Process Eng. 7:239-251. Mussa, D. M., Ramaswamy, H. S. and Smith, J.P. 1999. High-pressure destruction kinetics of
Buchanan, R. L 1997. Identifying and controlling emerging food borne pathogens: research listeria monocytogenes on pork. I Food Protect. 62(1):40-45.
needs. Emerging Infectious Diseases. 3 (4) :517 -521. Patterson, M. F., Quinn, M., Simpson, R. and Gilmour, A. 1995. Sensitivity of vegetative
Calderon-Miranda, M. L. I 998. Inactivation of listeria inocua by pulsed electric fields and pathogens to high hydrostatic pressure treatment in phosphate buffered saline and foods.
nlsin. Pullman, WA. Washington State University. I Food Protect. 58(5):524-529.
Carsberg, H. 1999. Sanitation: It's a small world. Food Quality. Jan/Feb:61-62. Patterson, M. F. and Kilpatrick, D. J. 1998. The combined effect of high hydrostatic pressure
CDC. 1998. Update: Multistate outbreak of listeriosls-United States, 1998-1999. MMWR. and mild heat on inactivation of pathogens in milk and poultry. J Food Protect. 61 (4):432
47:1117-1118. 436.
CDC. 1999. incidence of foodborne illnesses: preliminary data from the foodborne diseases Peleg, M. 1995. A model of microbial survival after exposure to pulse electric fields. Journal
active surveillance network [Foodnet)-United States, 1998. MMWR. 48:189-194. Sci Food Agric. 67(1):93-99.
CDC. 2000. Surveillance for foodborne disease outbreaks-United States, 1993-1997. Morbid Peleg, M. and Cole, M. 8. 1998. Reinterpretation of Microbial Survival Curves. Crit Rev in
ity and MortalJty Weekly Reports. 49: 1-51. Food Science. 38(5):353-380.
Cho, H.-Y., Sastry, S. K. and Yousef, A. E. 1999. Kinetics of inactivation of Bacillus subtilis Ponce, E., Pia, R.. Mor-Mur, M., Gervilla, R. and Guamis, B. 1998. Inactivation of Listeria
spores by continuous or intermittent ohmic and conventional heating. Biotechnol Bioeng. innocua inoculated in liquid whole egg by high hydrostatic pressure. I Food Protect.
62(3):368-372. 61(1):119-122.
Crawford, Y. J., Murano, E. A.. Olson, D. G. and Shenoy, K. 1996. Use of high hydrostatic Pothakamury, U. R., Monsalve-Gonzalez, A., Barbosa-Canovas, G. V. and Swanson, B. G.
pressure and irradiation to eliminate Clostridium sporogenes in chicken breast. I Food 1995a. Inactivation of Escherichia coli and Staphylococcus aureus in model foods by
Protect. 59:711-715. pulsed electric field technology. Food Res Int. 28(2):167-171.
Datta, A. I<. 1992. Error estimates for approximate kinetic parameters used in food literature. Qin, 8. -L I 995. Nonthermal inactivation Saccharomyces cerevisiae In apple juice using pulsed
J Food Eng. 18:181-199. electric fields. Lebensm Wiss Technol. 28(6):564-568.
Davidson, P. M. 1999. Potential for emergence of resistance to antimicrobials used in the food Qin, 8.-L., Chang, F.-J., Barbosa-Canovas, G. V. and Swanson, B. G. J995a. Nonthermal inac
industry. Proceeding Symposium on Food Microbiology. international Institute Life Sci tivation of S. cerevislae in apple juice using pulsed electric fields. LebensmWiss Technol.
ence North America Tech Committe on Food Microbiology. p.19-21. Dearborn, MI. 28(6):564-568.
Doyle, M. P. and Schoeni, J. L. 1984. Survival and growth characteristics of escherichia coli Raso, J., Pagan, R., Condon, S. and Sala, F. J. 1998a. Influence of temperature and pressure
associated with hemorrhagic colitis. Appl Env Microbiology. 48:855-856. on the lethality of ultrasound. Appl Environ Microbial. 64(2):465-471.
Dunn, J.E. and Pearlman, J. S. 1987. Methods and apparatus for extending the shelf-life of Reddy, N. R., Solomon, H. M., Fingerhut, G., Balasubramaniam, V. M. and Rhodehamel, E.
fluid food products. Maxwell Laboratories, Inc. U.S. Patent 4,695,472. J. 1999. Inactivation of Clostridium botulinum types A and B spores by high-pressure
Fernandez-Molina, J. J., Barkstrom, E., Torstensson, P., Barbosa-Canovas, G. V. and Swanson, processing. !Ff Annual Meeting: Book of Abstracts. National Center for Food Safety and
B. G. 1999. Shelf-life extension of raw skim milk by combining heat and pulsed electric Technology, Illinois Inst of Technology. p. 33 Chicago, IL.
fields. Food Res Int. Reina, L. D., Jin, Z. T., Yousef, A. E. and Zhang, Q. H. 1998. Inactivation of Listeria monocy
Gervilla, R., Capellas, M., Ferragut, V. and Guamis, B. 1997a. Effect of high hydrostatic pres togenes in milk by pulsed electric field. J Food Protect. 61(9):1203-1206.
sure on Llsteriainnocua 9IOCECT inoculated into ewes' milk. I Food Protect. 60(1):33-37. Rocourt, J. and Cassatt, P. 1997. Listeria monocytogenes. M. P. Doyle, L. R. Beauchat and T.
Grahl, T., Sitzmann, W. and Marki, H. 1992. Killing of microorganisms in fluid media by high J. Montvllle(eds.J. Food Microbiology: Fundamentals and Frontiers. Washington, D.C.
voltage pulses. DECHEMA Biotechnology Conferences. 675-679. American Society for Microbiology. 337-352.
Granum, P. E. 1997. Bacillus cereus. M. P. Doyle, L. R. Beauchat and T. J. Monrville(eds.). Food Rose,). B. and Slifko, T. R. 1999. Giardia, Cryptosporidium and Cyclospora and their impact
Microbiology: Fundamentals and Frontiers. Washington, DC. American Society for Mi on foods, a review. I Food Protect. 62: 1059-1070.
crobiology. 327-336. Rovere, P., Carpi, G., DalJ'Aglio, G., Gola, S., Maggi.A., Miglioli, L. and Scaramuzza, N. 1996b.
Gupta, R. P. and Murray, W. 1988. Pulsed high electric field sterilization. IEEE Pulsed Power High-pressure heat treatments: Evaluation of the sterilizing effect and of thermal dam
Conf. Record. National Research Council. 58-64. age. Industrla Conserve. 71 :473-483.
Ho, S. Y., Mittal, G.S., Cross, J. D. and Griffiths, M. W. 1995. inactivation of pseudomonas Sale, A. J. H., Gould, G. W. and Hamilton, W. A. 1970. Inactivation of bacterial spores by
fluorescens by high voltage electric pulses. J Food Sci. 60(6):1337-1343. hydrostatic pressure. J Gen Microbial. 60:323-334.
Hillsheger, H. and Nieman, E. G. 1980. Lethal effect of high-voltage pulses one. coli KI2. Sensoy, I., Zhang, Q. H. andSastry, S. K. 1997. Inactivation kinetics of Salmonella dublin by
Radiat Environ Biophys 18(4):281-8. pulsed electric field. I Food Process Eng. 20:367-381.
Hillsheger, H.. Pottel, J. and Niemann, E.G. 1981. Killing of bacteria with electric pulses of Smelt, J.P. P. M. and Hellemons, J.C. 1998. High pressure treatment in relation to quantitative
high field strength. Radial Environ Biophys. 20:53-65. risk assessment. VTT Symposium. Espoo: Technical Research Centre of Firtland. 27-38.
Hillsheger, H., Pottel, J. and Niemann, E.G. 1983. Electric field effects on bacteria and yeast van Boeke!, M.A. J. S. 1996. Stastical aspects of kinetic modeling for food science problems.
cells. Radial Environ Biophys. 22:149-162. I Food Sci. 61:477-485.
JCMSF. 1996. Microorganisms in foods. Microbiological Specifications of Food Pathogens. Varnam, A.H. and Evans, M. G. 1991. Foodborne Pathogens: An Illustrated Text. London.
Book 5. Blackie Academic and Professional Pub!. London. Wolfe Publishing, Ltd. 51-377.
Jackson, G. J., Leclerc, J.E., Bier,). W. and Madden, J.M. 1997. Cyclospora- stillanothernew Vega-Mercado, H .. Martin-Belloso, 0., Chang, F.-J., Barbosa-Canovas, G. V. and Swanson, B.
foodborne pathogen. Food Technol. 51(1):120. G. 1996a. Inactivation ofEscherichia coli and Bacillus subtilis suspended in pea soup using
Jacob, H. E., Forster, W. and Berg, H. 1981. Microbial implications of electric field effects. ll. pulsed electric fields. I Food Process Pres. 20(6):501-510.
Inactivation of yeast cells and repair of their cell envelope. ZAllg Microbial 21 (3):225-232. Weemaes, C., Ooms, V., Indrawatl, L., Ludlkhuyze, I., Van den Broeck, A., van Loey, A. and
Jayaram, S., Castle, G. S. P. and Margaritis, A. 1992. Kinetics of sterilization of Lactobacillus Hendrickx, M. 1999. Pressure-temperature degradation of green color in broccoli juice. I
breviscells by the application of high voltage pulses. Biotechnol Bioeng. 40(11):1412-1420. Food Sci. 64:504-508.
Jeyamkondan, S., Jayas, D.S. and Holley, R. A. 1999. Pulsed electric field processing of foods: Zhang, Q. H., Monsalve-Gonzalez, A., Barbosa-Canovas, G. V. and Swanson, B. G. 1994a.
a review. J Food Protect. 62(9):1088-!096. Inactivation of E.coli and S. cerevisiae by pulsed electric fields under controlled temper
Kalchayanand, N., Sikes, A., Dunne, C. P. and Ray, B. 1998. Interaction of hydrostatic pressure, ature conditions. Transactions of the ASAE. 37(2):581-587.
time and temperature of pressurization and pediocin AcH on inactivation of food borne Zhang, Q. H., Qin, B.-L., Barbosa-Canovas, G. V. and Swanson, B. G. 1995a. Inactivation of
bacteria. Journal of Food Protection. 61(4):425-431. E. coll for food pasteurization by high-strength pulsed electric fields. I Food Process Pres.
Katsuyama, A. M. 1993. The microbiology of sanitation. A. M. Katsuyama. Principles of Food 19(2):!03-118.
Processing Sanitation. Washington, DC. The Food Processors Institute. 72-84. 2nd Edition. Zook, C. D., Parish, M. E., Braddock, R. J. and Balaban, M. 0. 1999. High pressure inactivation
Larkin, J. and Reddy, N. R. 1999. Personal communication. kinetics of Saccharomyces cerevisiae ascospores in orange and apple juice. I Food Sci.
64(3):533-535.

Supplement-JOURN~L Of' FOOD SCIENCE 29

Jf"S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Thermal Resistance Tables

Table 2-Heat resistance of serovars of Salmonella In various foods Tllble 8-Heat resistance of Vibrio species (ICMSP 1998)
PCMll'1H8)
Species Product Temp 0-value z-value
Serovar Food Tamp 0-value Approx. z-value (C) (min) (C)
(C) (min) (C)
parahaemolyticus 5.6-12.4
Senftenberg beefboullion 65.5 0.66 fish homogenate 48 10-16
pea soup 65.5 1.11 5.6 clam homogenate 55 0.02-0.29
skim milk 65.5 1.11 crab homogenate 55 2.5
Milk 65.6 0.56 4.4 cholerae
Milk chocolate 70 480 18.9 1% peptone 60 0.63 17
Milk chocolate 71 276 crab homogenate 60 2.65 21
Typhimurium Milk chocolate 70 1050 17.7 oyster homogenate 60 0.35
Milk chocolate 71 396 vulnificus SIMILAR TO V parahaemolyticus
TS8 1 + 10% MS2 55.2 4.7 4.5
TS8+30%MS 55 11 4.6
TS8+42%MS 55.1 18.3
ground beef 57 2.13-2.67
Eastbourne Milk chocolate 71 270 Tllble 7-Aeromonas hydrophlla heat resistance (ICMSP 19981
none specified Ground beef 57.2 4.2
Product Temp('C) D-value (min) z-value (C)
'Trypticase soy broth
2Milk solids
Raw milk 48 3.3-6.2 5.2-7.7

Saline 48 2.2-6.6 5.2-7.7

Tllble 3-Heat resistance as measured bi, the D-value at 811.8 c (1110

0
F) and approximate zvalues of Salmonella serovars In milk (ICMSP
1998)
Serovar 0 euc (s) Approx. z-value (C) Tllble 8-Campylobacter JeJunl heat resistance (ICMSF 1998)
Anatum 1.4 5.0 Product Temp(C) 0-value (min)
Binza 1.5 5.3
Cubana 1.8 5.6 Skim milk 50 1.3-5.4
Meleagridis 1.1 5.4 55 0.74-1.0
Newbrunswick 1.3 4.5 Ground beef 50 5.9-6.3
Senftenberg 34.0 4.4 56 0.62-0.96
Tennessee 1.4 4.9 Lamb 50 5.9-13.3
55 0.96-1.26
Cooked chicken 55 2.12-2.25

Table 4-Effect of heating on pathogenic and non-pathogenic strains

of scherlchla coll (ICMII' 1998)
Tllble 9-Reslstance of Llderla monocytogenes to heat In milk prod
Product Strain Temp(C) D-value (min) ucts (ICMSP 1998)
Raw milk ATCC 9637 (NP) 1 57.2 1.3 Products Temp(C) D-value (min)
Chocolate milk ATCC 9637 (NP) 57.2 2.6
40%Cream ATCC 9637 (NP) 57.2 3.5 Raw milk, raw skim milk,
Ice cream mix ATCC 9637 (NP) 57.2 5.1 raw whole milk, cream 52.2 24.08-52.8
Skim milk 0111:84 55 5.5 57.8 3.97-8.17
Whole milk 0111:84 55 6.6 63.3 0.22-0.58
Ground beef 2 0157:H7 57.2 4.5 66.1 0.10-0.29
Ground beef 3 0157:H7 57.2 4.1-6.4
Ground beef 2 0157:H7 62.8 0.4
Ground beef 3 0157:H7 62.8 0.26-0.47
1NP, non-pathogenic
2Doyle and others 1984
3Une and others 1991 Tllble 10-Heat resistance of Listeria monocytogenea In various prod
ucts at 80 c (ICMSP 1998)
Product 060 c - value (min)
Tllble a-Effect of heating on Yenlnla enterocolfflca In milk; where Ground meat 3.12

measured, z-value ranged from 4.0-8.78 c (ICMSP 19981 Ground meat, cured 16.7

Fermented sausage 9.2-11

Temperature (C) D-value Roast beef 3.5-4.5

51.7 23.4-29.9
Beef 3.8

55 1.8-2.2
Beef homogenate 6.27-8.32

57.2 4.6-14.7
Naturally contaminated beef 1.6

58 1.4-1.8
Weiner batter 2.3

60 0.067-0.51
Chicken leg 5.6

62 0.15-0.19
Chicken breast 8.7

62.8 0.012-0.96
Chicken homogenate 5.02-5.29

65 0.028
Carrot homogenate 5.02-7.76

68.3 0.09
RANGE 1.6-16.7

30 JOURNAL.. OF FOOD SCIENCE-Supplement

Overarching Principles ...
Table 11-Stapltylococcus aureus vegetative cell heat ntelstance Table 111-Heat ntelstance of Clostrldlum botullnum proteolytic 'lfte
pcMIP18H), B eponte at 110 c (ICMSP 1881)
Product Temp (C) D-value (min) Product D-value (min) z-value (C) Strain
Milk 50 10 z = 9.5 c Asparagus, canned, pH 5.04 1.09 9.7 2138
55 3 Asparagus, canned, pH 5.42 1.06 7.9 2138
60 0.9 Beans.snap 0.86 9.7 2138
65 0.2 Beets 1.17 10.8 2138
70 0.1 Carrots, fresh 0.94 9.4 2138
75 0.02 Com 1.03 10.0 2138
Meat macerate 60 6.0 + 500 ppm nitrite Corn, puree 2.88 10.6 2138
Pasta. semolina-egg dough 60 3 8w= 0. 92 Corn, canned 2.15 9.6 2138
5 11w= 0. 87 Milk solids, whole, 20%, pH 6.34 0.93 7.9 2138
8 8w = 0. 85 Mushrooms, puree 0.49-0.99 7 strains
12 aw= 0. 83 Peas, puree 2.14-12.42 8.3 2138
>40 8w= 0. 80 Peas, canned, pH 5.6 3.07 10.1 2138
32 8w = 0. 76 Peas, canned, pH 5.94 1.52 7.4 2138
22 aw= 0. 61 Rock lobster, liquor 2.97-3.33 10.6 A35
Phosphate buffer 60 2.5 pH= 6.5 Spinach, fresh 1.75 10.3 2138
Spinach, canned, pH 5.39 1.54 8.6 2138
Spinach, canned, pH 5.37 1.19 2138
Phosphate buffer, M/15, pH 7.0 1.85 7.7-11.3 2138
1.4 8.5 2138
Table 18-8aolllue cereus eponte heat ntelstance In varloue media at 1.6 8.3 2138
ncpc..,18HJ 1.19 9.1 2138
2.0 9.1 2138
Heating medium D95C(min) z-value (C) 1.5 10.1 Amanna
0.06 M phosphate, pH 7.0 2.6-21.7 10.0-10.1 2.0 9.0 1698
0.05 M phosphate, pH 7.0 1 2.1-3.4
Phosphate, pH 7.0 13
Distilled water 1.5-36.2
Water 36 6.7-8.3 Table 11-Comparleon of heat ntelstancee ae meaeuntd br D-value In
Infant formula, pH 6.3 2.7-15.3 8.1-8.7 minute of Cloetrldlum botullnum T,pe A and B eponta In elmllar
Milk 1.8-19.1 9.4 products at 11 oc (ICMSP 1881)
Bread 2.9-36.2
RANGE 1.5-36.2 6.7-10.1 Product TypeA Type B (Proteolytlc)
I Contains sorbltol, glycerol or NaCl Asparagus, canned 0.61-1.22 1.06-1.09
Corn, canned 1.89 2.15
Peas, puree 1.98 2.14-12.42
Peas canned 0.61-1.22 1.52-3.07
Spinach, canned 0.61-1.74 1.19-1.54
Table 13-Neat ntelstance of Cloetrldlum perfrlngene eponte (ICMSP
Phosphate buffer, M/15, pH 7.0 0.88-1.9 1.19-2.0
18HI
Product/Heating Medium Temperature (C) D-value (min)

Phosphate buffer, pH 7.0 90 0.015-8.7

Phosphate buffer, pH 7.0 98.9 18.6
104.4 3.15 Table 17-Heat ntelstance of Clostrldlum botullnum non-proteolytic
110 1.29 T,pe eponte In Hafood products (ICMSP 1881)
Beef gravy, pH 7.0 98.9 31.4
104.4
110
6.6
0.5
Product r_,.,
(C)
D-value (min) z-value
(C)
Blue crabmeat 74 6.8-13.0
Oyster homogenate 70 72 7.5
Oyster homogenate + 1% NaCl 70 100 6.8
Oyster homogenate + 0.13% K sorbate 70 72 7.4
Table 14-Neat ntelstance of Cloetrldlum botullnum etraln 12A ~ Oyster homogenate + NaCl + K sorbate 70 79 7.3
A) eponte at 110 c. (ICMSP 1881) Menhaden surimi 73.9 8.66 9.78
Product D-value (min) z-value (C)
Asparagus, canned, pH 5.04 1.22 8.8
Asparagus, canned, pH 5.42 0.61 7.9
Com, canned 1.89 11.6
Macaroni creole, pH 7.0 2.48 8.8 Table 18-Heatlng nteletance of protozoa In water eyateme and In
Peas, puree 1.98 8.3 food
Peas canned, pH 5.24 0.61 7.6
Organism Heating Med Survival TlmafTemp. Reference
Peas, canned, pH 6.0 1.22 7.5
Spanish rice, pH 7.0 2.37 8.6 Anisakis
Spinach, canned, pH 5.37 0.61 8.4 pseudoterranova fish/medium maximum
Spinach, canned, pH 5.39 1.74 10.0 survival time 1 min, 60 c
Squash 2.01 8.2 Anisakis anisakis fish/medium maximum
Tomato juice, pH 4.2 1.50-1.591 9.43 survival time 10 S, 55 C
Tomato juice, pH 4.2 0.92-0.98 Cryptosporidium
Phosphate buffer, M/15, pH 7.0 0.88 7.6 oocysts distilled water 3-log reduction 1 min, 60 c 2
1.74 10.0 Cryptosporidium
1.34 9.8 oocysts Milk 6-log reduction 5 S, 71.7 C 2
1.6-1.9 8.1-9.2 Taenia cysticerci inactivated 60c 1
1.01 9.1
Distilled water 1.79 8.5 11CMSF 1996
2Rose and Slifko 1999
1Strain A 16037

Supplement-JOURNAL OF FOOD SCIBNCB 31

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies

Microwave and Radio Frequency Processing

ASHIM K. DA'ITA AND P. MICHAEL DAVIDSON

ScoPE oF DELIVERABLES: The use of microwave and radio frequencies to heat food for commercial pasteurization and
sterilization in order to enhance microbial safety is discussed here. Although not under FDA regulations, use of
microwave technology to enhance microbial food safety in the home is also discussed briefly. Mechanisms of
heating food and destroying pathogens, and the validation of industrial processes are also discussed, followed by
conjecture on handling deviations during industrial processing. This document summarizes information obtained
through published literature and personal contacts with industry, academia, and government. Although radio fre
quency is covered whenever possible, very little information on radio frequency heating for commercial pasteuriza
tion or sterilization of food is available in the published literature and no commercial facility for this purpose could
be located. The microbial inactivation mechanisms of radio frequency heating are also quite similar to those of
microwave heating. Thus, this document refers mostly to microwave processing with the implicit assumption that the
principles are generally applicable to radio frequency. Specific information on radio frequency is included when
ever available.

1. Introduction stant), and e" is the dielectric loss factor (a material property called
dielectric property) representing the material's ability to absorb
1.1. Definition, Description and Applications the wave. Not apparent from the above equation, there is another
1.1.1. Definition dielectric property called the dielectric constant that affects the
Microwave and radio frequency heating refers to the use of strength of the electric field inside the food. The dielectric proper
electromagnetic waves of certain frequencies to generate heat in a ties depend on the composition (or formulation) of the food, mois
material (Metaxas 1996; Metaxas and Meredith 1988; Roussy and ture and salt being the two primary determinants of interest
Pearce 1995). The frequencies allocated by the Federal Communi (Mudgett 1994; Datta and others 1994). The subsequent tempera
cations Commission (FCC) for the purposes of heating are listed in ture rise in the food depends on the duration of heating, the loca
Table 1. Typically, microwave food processing uses the 2 frequen tion in the food, convective heat transfer at the surface, and the
cies of2450 and 915 MHz. Of these two, the 2450 MHz frequency is extent of evaporation of water inside the food and at its surface.
used for home ovens, and both are used in industrial heating. It is
worthwhile to note that outside of the United States, frequencies 1.1.3. Advantages of microwave and radio frequency
of 433.92, 896, and 2375 MHz are also used. processing
Radio frequency heating in the United States can be per Microwave and radio frequency heating for pasteurization
formed at any of the 3 frequencies listed in Table 1. As men and sterilization are preferred to the conventional heating for
tioned earlier, there is not much commercial use of these fre the primary reason that they are rapid and therefore require less
quencies for food pasteurization or sterilization, although they time to come up to the desired process temperature. This is par
are used in baking and other processes in the food industry. An ticularly true for solid and semisolid foods that depend on the
overview of food and chemical processing uses of radio frequen slow thermal diffusion process in conventional heating. They can
cy can be seen in Kasevich (1998) and Minett and Witt (1976). approach the benefits of high temperature-short time process
ing whereby bacterial destruction is achieved, but thermal deg
1.1.2. How the microwaves and radio frequencies radation of the desired components is reduced. This is illustrated
generate heat in Fig. 1 for typical time-temperature histories of microwave and
Heating with microwave and radio frequency involves prima conventional heated processes.
rily 2 mechanisms-dielectric and ionic. Water in the food is often Microwave and radio frequency heating may be relatively
the primary component responsible for dielectric heating. Due to more uniform than conventional heating, depending on the par
their dipolar nature, water molecules try to follow the electric ticular heating situation (Datta and Hu 1992); however, heating
field associated with electromagnetic radiation as it oscillates at uniformity is hard to predict. Figure 2 illustrates a scenario in
the very high frequencies listed in Table 1. Such oscillations of which microwave heating is spatially more uniform than conven
the water molecules produce heat. The second major mechanism tional heating and helps demonstrate the reasoning behind it.
of heating with microwaves and radio frequency is through the The information shown in Fig. 2 is computed from mathematical
oscillatory migration of ions in the food that generates heat un models of a conventional and a comparable microwave heating
der the influence of the oscillating electric field.
The rate of heat generation per unit volume, Q, at a particular
location in the food during microwave and radio frequency heat Table 1 Prequenclea assigned by the PCC for lnduatrlal, aclantlflc,
ing can be characterized by (Buffler 1993; Datta and Anan and medlcal un
theswaran 2000) Frequency
Radio 13.56 MHz 6.68 kHz
27.12 MHz 160.00 kHz
40.68 MHz 20.00 kHz
Microwaves 915 MHz 13 MHz
where Eis the strength of electric field of the wave at that loca 2450 MHz 50 MHz
tion, /is the frequency (Table 1) of the microwaves or the radio fre 5800 MHz 75 MHz
quency waves, e0 the permittivity of free space (a physical con 24125 MHz 125 MHz

32 JOURNAL. Of' f'OOD SCIENCE-Supplement

Microwave and Radio Frequency ...
process for a solid for input parameters given in Datta and Hu and have installed a newly designed system in 1999. Although
(1992). Figure 2a shows that the range of temperatures reached continuous microwave heating in a tube flow arrangement has
by the 2 processes are approximately similar (as read from the been studied at the research level, no commercial system is
horizontal axes) at the heating times shown. The vertical axis known to exist for food processing.
shows the cumulative volume fractions of the food associated Commercial radio frequency heating systems for the purpose
with a temperature, that is, for any temperature, the value on the of food pasteurization or sterilization are not known to be in use,
curve signifies the volume fraction of food that has temperatures although it has been researched over the y (Bengtsson and
at or below this value. Figure 2b shows that the range of Fa values Green 1970; Houben and others 1991; Wig and others 1999). The
(signifying time-temperature histories) are quite different for primary advantage of improved uniformity of heating was shown
the same conventional and microwave heated food as in Fig. 2a, for in-package sterilization of foods in large packages using radio
for which temperatures are approximately similar. The conven frequency at 27.12 MHz, although enhanced edge heating con
tional heat process shows a much larger spread of Fa, which pri tinued to be an issue (Wig and others 1999).
marily signifies its tremendous nonuniformity of temperatures Implementation of a microwave sterilization process can vary
and long processing times leading to significant over-processing significantly among manufacturers. Unlike conventional heating,
of the surface regions of the food. the design of the equipment can more dramatically influence the
Other advantages of microwave and radio frequency heating critical process parameter-the location and temperature of the
systems are that they can be turned on or off instantly, and the coldest point. This uncertainty makes it more difficult to make
product can be pasteurized after being packaged. Microwave general conclusions about processes, process deviations, and how
and radio frequency processing systems also can be more energy to handle deviations. For example, in one implementation (Har
efficient. lfinger 1992) the process design consisted of heating, equilibra
tion, holding, and cooling stages. The equilibration stage between
1.1.4. Industrial pasteurization and sterilization heating and holding was to equilibrate the temperatures and
systems avoid nonuniformities within the product. Hot air temperature
Industrial microwave pasteurization and sterilization systems and time are the factors controlling the equilibration process. All 4
have been reported on and off for over 30 y (Jeppson and Harper stages are done under pressure to reach sterilization tempera
1967; Kenyon and others 1970; Mudgett and Schwartzbenrg tures. The parameters recorded for the process were delivered
1982; Decareau 1985; Schlegel 1992; Harlfinger 1992; Anony power, temperature, pressure, speed, and cycle time.
mous 1996; Tops 2000). Studies with implications for commercial Another system (Tops 2000) consists of microwave tunnels
pasteurization and sterilization have also appeared for many y with several launchers in relation to the number of products
(Proctor and Goldblith 1951; Hamid and others 1969; Knutson (ready meals). Microwave-transparent and heat-resistant trays
and others 1988; Burfoot and others 1988; 1996; Kudra and oth are used with shapes adapted for microwave heating. Exact posi
ers 1991; Cassanovas and others 1994;Villamiel and others 1997; tioning of the package is made within the tunnel and the package
Zhang and others 1999). Early operational systems include batch receives a precalculated, spatially varying microwave power pro
processing of yogurt in cups (Anonymous 1980) and continuous file optimized for that package. The process consists of heating,
processing of milk (Sale 1976). A very significant body of knowl
edge has been developed related to these processes. As of this
writing, 2 commercial systems worldwide could be located that
currently perform microwave pasteurization and/or sterilization 1.0
of foods (Akiyama 2000; Tops 2000). As a specific example, 1 com
pany (Tops 2000) produced over 13 million ready meals in 1998 j 0.8

lo.a Microwave
3.5 min at 2 W/c,;;

)o.4
12 120 I&.

jo.2
>
.
10
0.0

.
#,' 100 80 90 100 110 120

..
Temperature (C) a)
8
Fo Micnlwallll Colw91tionll
Nutrient F0
Temp 1.0
(min) (oC)
:
6 : 80
i 0.8

4 l
C
0.6

2
,' Conventional ...
80
t
I&.
0.4

,, / bacterial
.. ~0/ !
>
0.2

0 0.0
0 10 20 30 40 50 60
0.01 0.1 1 10 100
Time (min) F0 (min) b)
Pig. 1-Quallty parameten for microwave and conventlonal heating Pig. 2-llluatratlon of how F0 values (bl are typically quite different
comparad uelng computed values for typical heating situations (Datta for microwave proc...lng against conventlonal procelng even when
and Hu 1H21. PO reprnenta the accumulated lethality , _ Section 4) the range of temperatures are aim Har (a) (Datta and Liu 1992)

Supplement-JOURNAL OP FOOD SCIENCE 33

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
holding and cooling in pressurized tunnels. The entire operation is though detailed discussions on those mechanisms are difficult to
highly automated (see monitoring of process deviations later). locate in the literature. As many as 4 separate effects have been
For in-package pasteurization or sterilization, packaging ma proposed-selective heating of microorganisms, electroporation,
terials need to be microwave transparent and have a high melt cell membrane rupture, and cell lysis due to electromagnetic en
ing point. Also, because metal reflects microwaves, packages ergy coupling. These mechanisms are discussed later in more de
with some metal component can considerably change the food tail; however, the general consensus (Heddleson and Doores
temperatures (critical process factor). In some situations, metals 1994) is that the reported nonthermal effects are likely to be due
have been deliberately added to the package to redistribute mi to the lack of precise measurements of the time-temperature his
crowave energy to achieve increased uniformity of heating. The tory and its spatial variations.
most common packages that have been tried are individual
pouches made of microwave transparent rigid films such as 1.3. Summary of Microbial Inactivation Kinetics
polypropylene with an ethylene vinyl alcohol (EVOH) barrier or a Since the studies reporting nonthermal effects have been in
polyethylene terephthalate (CPET) film. conclusive, only thermal effects are presumed to exist. Thus, mi
crobial inactivation kinetics for microwaves are essentially the
1.1.5. Shelf-life extension at home same as the inactivation kinetics of conventional thermal pro
Almost every U.S. household owns a microwave oven that cessing. The microwave nonthermal effects have been reported
uses microwaves at a frequency of2450 MHz. Reheating in a mi to add to the destruction of microorganisms. Thus, ignoring the
crowave oven, which the FDA does not regulate, is perhaps the possible nonthermal effect can only provide an extra safety fac
most widespread use of the microwaves and has been known to tor. To date, there do not appear to be any microwave-resistant
involve serious microbiological safety issues. Researchers have foodborne pathogens.
also reported the use of home microwave ovens for pasteuriza
tion or for increasing shelf life (Chiu and others 1984; Knutson 1.4. Summary of Critical Process Factors
and others 1988; Thompson and Thompson 1990). Since the thermal effect is the sole lethal mechanism as
sumed in this processing technology, time-temperature history
1.1.6. Future processes at the coldest location will determine the safety of the process.
Many techniques have been tried to improve the uniformity Both the magnitude of time-temperature history and the loca
of heating. These include rotating and oscillating the food pack tion of the cold points are functions of the composition (ionic
age (O'Meara and others 1977). providing an absorbing medium content, moisture, density, and specific heat). shape, and size of
(such as hot water) surrounding the product (Stenstrom 1974; the food, the microwave frequency, and the applicator (oven) de
Ohlsson 1991; Lau and others 1998). equilibrating after heating sign. Time is also a factor in the sense that, as the food heats up,
(Fakhouri and Ramaswamy 1993). and cycling the power. In the its microwave absorption properties can change significantly and
past, success of these processes has been limited due to the tre the location of cold points can shift (Fig. 3).
mendous dependence of temperature and its distribution on
food and oven factors. Use of the 915 MHz and radio frequencies 1.5. Synergistic Effects
to improve uniformity of heating may have potential for the fu Microwave processes are sometimes combined with conven
ture (Lau and others 1999b; Wig and others 1999). Future possi tional heating. Synergistic effects, where the total effect of the
bilities to improve the uniformity of heating include variable fre combined process on the microorganism is more than the sum of
quency microwave processing and phase control microwave pro individual effects of microwave and the other process, have not
cessing. Although these 2 techniques have been applied to mi been reported.
crowave heating of nonfood materials, they are yet to be applied
to food in any significant way. Combinations of microwave and 1.6. Current Limitations/Status
conventional heating in many different configurations have also As mentioned earlier, only 2 companies (Tops 2000; Akiyama
been used to improve heating uniformity. The critical process 2000) could be located worldwide that are currently using micro
factor in combination heating or any other novel processes would wave technology for pasteurization/ sterilization of foods. Other
most likely remain the temperature of the food at the cold point, systems may be operational, but details were not available (Bas
primarily due to the complexity of the energy absorption and sani 1999; Anonymous 1999). Some reasons given for the lack of
heat transfer processes. success in commercial operation are complexity, expense, non
In the future, microwaves may be combined with convention uniformity of heating, inability to ensure sterilization of the en
al heating or chemical treatments for surface treatment, for ex tire package, lack of suitable packaging materials, and unfavor
ample, meat processing (KSU 1999) or food contact surface able economics when compared to prepared frozen foods in the
(Anonymous 1996). United States. Current research at several universities (Washing
ton State University, Cornell University) and a government
1.2. Summary of Mechanism of Inactivation agency (U.S. Army Laboratories at Natick, MA) is aimed at further
The energy absorption from microwaves and radio frequency commercial use of microwave sterilization, particularly in the
can raise the temperature of the food high enough to inactivate mi context of providing improved quality rations for soldiers.
croorganisms for effective pasteurization or sterilization. A number
of studies have proven that the thermal effect is the essential con 2. Pathogens of Public Health Concern Most
tributor to the destruction of microorganisms (Goldblith and Wang Resistant to the Technology
1967; Rosen 1972; Fujikawa and others 1992) as well as the degrada
tion of vitamin B1, thiarnin (Welt and Tong 1993). 2.1. Identification of Pathogens Resistant to
Since the beginning of microwave processing, there has been Microwaves
controversy about the possible nonthermal (also called "ather Numerous studies address the effect of microwave heating
mal") effects of microwave processing (these are effects unrelat on pathogenic microorganisms in foods. Bacteria reported to be
ed to the lethality caused by the heat) (McKinley 1936; Burton inactivated by microwave heating include Bacillus cereus, Campy
1949; Cross and Fung 1982; Fung and Cunningham 1980). Re lobacter jejuni, Clostridium perfringens, pathogenic Escherichia
searchers have repeatedly reported nonthermal effects, al coli, Enterococcus, Listeria monocytogenes, Staphylococcus aureus,

34 JOURNAL. Of' FOOD SCIENCE-Supplement

Microwave and Radio Frequency ...
and Salmonella (Heddleson and others 1994; Rosenberg and causes microbial inactivation predominantly through thermal ef
Bogl 1987; Knutson, and others 1987; Chipley 1980). The nema fects. In reviewing the literature, no pathogen is identified as
tode Trichinella spiralis, the organism that causes trichinosis, may uniquely resistant to these processing methods. Therefore,
also be inactivated (Zimmerman 1983). Foodborne pathogens maintenance of cultures (pathogen, surrogate vegetative cells, or
have been shown to be inactivated by microwave heating in vari spore crops) for evaluating the process or processing unit effec
ous poultry, beef, fish, and pork products, milk, and eggs; howev tiveness should follow generally accepted culturing procedures
er, Heddleson and Doores (1994). reported that "in-home pas for thermal process evaluation. Conditions used for preparing,
teurization" of milk was "problematic" and "potentially danger culturing, or storing vegetative cells or spores should be such
ous" due to nonuniform heating and lack of standardization of that they produce the most resistant cell or spore. Appropriate
home microwave ovens. conditions may be determined by consulting thermal resistance
It is very difficult to precisely compare the effectiveness of mi literature (see Section 4.3.). Generally, specific conditions for the
crowave heating to conventional heating based on the literature, growth of the particular test microorganism should be defined.
because of the different techniques employed or the lack of de Cells incubated to stationary phase usually demonstrate maxi
tail in the methods or materials used, especially in relation to mum resistance. As suggested in the Overarching Principles Sec
temperature monitoring (Heddleson and Doores 1994). A recur tion 2, sublethal stress conditions also need to be evaluated, as
ring conclusion in the literature is that nonuniform heating by they may increase resistance. As a rule, one should ensure that
microwaves may lead to survival of foodborne pathogens, in the test microorganism has a heat resistance equivalent to that
cluding Salmonella and L. monocytogenes, in certain locations of generally recognized for the particular genus, species, and strain
foods heated at selected internal locations to endpoint tempera used.
tures that would normally be lethal (Schnepf and Barbeau 1989;
Harrison and Carpenter 1989). For example, several studies have 3.2. Microbial Enumeration Conditions and Methods
demonstrated that the measured internal temperature of poul Once the vegetative cell or spore is treated with microwaves, it
try does not indicate the extent of inactivation of surface-inocu must be enumerated to determine if it is still viable. The objec
lated Salmonella on poultry due to lower temperatures at the tive of the recovery process is to provide optimum conditions for
product surface (Schnepf and Barbeau 1989). treated cells or spores to grow to obtain a measure of the maxi
There do not appear to be any obvious "microwave-resistant" mum number of noninjured and injured survivors (Overarching
foodborne pathogens. Various studies have shown increased resis Principles Section 2). For thermal processes, the length of incu
tance of S. aureus, C. perfringens, or Enterococcus faecalis but not bation may be important in recovering viable cells or spores, be
necessarily to the point that these could be labeled as resistant. As cause thermally treated cells or spores generally grow slower
with conventional heating, bacteria are more resistant to thermal than nontreated ones. As with other process studies, experimen
inactivation by microwave heating than yeasts and molds and tation will be necessary to determine the optimum conditions
bacterial spores are more resistant than vegetative cells. and methods for microbial enumeration.

2.2. Effects of Critical Process Factors on Inactivation 3.3. Detailed Analysis of Inactivation Mechanisms
As with other thermal processes, the primary factors that de 1\vo mechanisms are proposed for inactivation of microorgan
termine safety are temperature and time (that is, integrated isms by microwaves. The first states that microwaves inactivate
time-temperature history). A number of critical process factors microorganisms entirely by heat through mechanisms compara
affect time-temperature history. These are discussed in detail in ble to other biophysical processes induced by heat, such as de
Section 4.1. Some of these critical process factors are moisture, naturation of enzymes, proteins, nucleic acids, or other vital com
ionic content, microwave frequency, product parameters (includ ponents, as well as disruption of membranes (Heddleson and
ing mass, density, geometry), specific heat, and the temperature Doores 1994). There is no question as to the validity of this mech
achieved. It is important to note that in the context of microwave anism. A second proposed mechanism for inactivation by micro
processing, these critical process factors do not change the rate waves involves nonthermal effects. Four predominant theories
of inactivation per se. Rather, these factors change the spatial have been used to explain nonthermal inactivation by micro
distribution of microwave absorption and, therefore, the spatial waves or "cold pasteurization": selective heating, electroporation,
ly distinct heating rate and time-temperature history. The spatial cell membrane rupture, and magnetic field coupling (Kozempel
distribution of time-temperature history, in turn, changes the and others 1998). The selective heating theory states that solid
distribution of the extent of inactivation within the food, thus microorganisms are heated more effectively by microwaves than
generally changing the total inactivated population within a giv the surrounding medium and are thus killed more readily. Elec
en food sample. For example, the population of cells heated for troporation is caused when pores form in the membrane of the
47 sat 700 Win a microwave oven in phosphate buffer were re microorganisms due to electrical potential across the membrane,
duced by 99.8%, while those in 1% sodium chloride were reduced resulting in leakage. Cell membrane rupture is related in that the
only by 62.4% (Heddleson and others 1994). Such a difference is voltage drop across the membrane causes it to rupture. In the
attributed to the effect of salt in decreasing the penetration of fourth theory, cell lysis occurs due to coupling of electromagnetic
microwaves. Less microwave penetration leads to a lower internal energy with critical molecules within the cells, disrupting inter
temperature and a lesser destruction in the interior regions, re nal components of the cell.
sulting in an overall lower destruction. These mechanisms have been studied extensively since the
1970s by a number of researchers. Culkin and Fung (1975) re
2.3. Shape of Inactivation Curves ported earlier studies that suggested microwave heating at
The shapes of the inactivation curves are expected to be simi 2450 MHz caused greater destruction of Aspergillus, Penicillium,
lar to those for conventional heating. Rhizopus, aerobic microorganisms, Salmonella and Proteus in
foods than heating alone. Culkin and Fung (1975) exposed E.
3. Mechanisms of Inactivation coli and Salmonella Typhimurium in soups to 915 MHz micro
waves and then determined survivors in the top, middle, and
3.1. Pathogen Culture Maintenance bottom regions of the product. The temperatures were mea
As stated above, microwave or radio frequency processing sured using temperature-sensitive strips. They found that the

Supplement-JOURN~L. OP FOOD SCIENCE 35

.J.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
greatest survival in the soups was in the top layer, which was tests with Saccharomyces cerevisiae and Lactobacillus plantarum
also shown to have the lowest temperature. A series of studies in apple juice, Ramaswamy and others (2000) also found that the
by Khalil and Villota (1988; 1989a;b) suggested nonthermal ef nonthermal effect of microwave energy at sublethal tempera
fects of microwave heating. They first determined that Bacillus tures is insignificant. However, they determined that, at equiva
stearothermophilus spores in various media (water, NaCl, su lent heat treatments, microwaves enhanced inactivation. They
crose, phthalate, or phosphate buffers) had lower D 100 c values demonstrated in a continuous flow system that E. coli K - 12 had
when 2450 MHz microwaves were used compared to using a significantly lower D-values (12.98 sat 55 C, 6.31 sat 60 C, 0.78
heated water bath. The experiment appears to have involved 6 sat 65 C) using microwave energy than equivalent heat treat
tubes at a single temperature with no replication. In addition, ments with hot water (44.7 sat 55 C, 26.8 sat 60 C, 2.00 sat
the come-up times, although a small part of the overall heating 65 C) or steam (72.71 sat 55 C, 15.61 sat 60 C, 2.98 sat 65 C).
times (microwaves: 58-83 s out of 90-190 min, conventional They concluded that, while there was no nonthermal effect of
heat: 100-135 s out of 113-240 min), were not considered. Hed microwaves, there was a significant enhancement of thermal
dleson and Doores (1994) disputed the above conclusions due treatments.
to inaccuracies in temperature measurement. Khalil and Villota Apart from the described studies, most research has conclud
(1988) further studied the effect of microwaves (2450 MHz as ed that there is little or no nonthermal effect of microwaves on
sumed) on injury of S. aureus FRI-100. They heated cells at a microorganisms (Rosenberg and Bi:igl 1987; Knutson, and oth
sublethal temperature of 50 c and maintained microwave ers 1987) and that inactivation of microorganisms is due only
temperature using recirculated cooled kerosene. Microwave to heat. Goldblith and Wang (1967) heated suspensions of E.
heating caused a greater amount of cellular injury as deter coli and Bacillus subtilis under conventional heating and with
mined by plating on trypticase soy agar plus 7% sodium chlo microwaves at 2450 MHz. The degree of inactivation of both
ride, increased loss of ultraviolet-absorbing cellular material, microorganisms was identical with conventional and micro
and extended time for enterotoxin production. Their findings wave heating. Vela and Wu (1979) heated various bacteria,
also showed that microwave-injured cells recovered better fungi, and bacteriophages in 2450 MHz microwaves in water
when microwave heating was carried out anaerobically. This ef and as lyophilized cultures. There was no inactivation of dry
fect was not seen with conventional heating. They speculated cultures even after extended exposure. Similarly, Jeng and
that the microwaves catalyzed oxidative reactions, possibly in others (1987) found no difference in inactivation of B. subtilis
membrane lipids, decreasing recovery of exposed cells. In an spores under conventional or microwave (2450 MHz) heating
other study, Khalil and Villota (1989b) demonstrated that while in automated computer-controlled temperature monitoring
both conventional and microwave heating destroyed the 16S systems. Kazbekov and Vyacheslavov (1978) found that thy
subunit of RNA of sublethally-heated S. aureus FRI-100, only midine and thymine uptake, leakage of potassium and hydro
microwave heating affected the integral structure of the 23S gen ions, and uptake of DNA by cells of E. coli or B. subtilis un
subunit. Moreover, when cells were allowed to recover following der low power microwaves were typical of that shown for heat
injury, it took longer for the microwave treated cells to restore ing. Fujikawa and others (1992) found no major differences in
their 23S RNA. Heddleson and Doores (1994) again concluded inactivation kinetics of E. coli in phosphate buffer between
that these studies suffered from the lack of proper method of microwaves and conventional heating. Welt and others
temperature measurement due to the unavailability of fiber (1993a) demonstrated no difference between conventional
optic thermometry. and microwave inactivation of Clostridium sporogenes PA3679
Kozempel and others (1998) designed a system in which vari at 90, 100, and 110 C. A suspension of spores that was ex
ous fluids were exposed to microwave energy (5.0 to 5.4 kW) and posed to microwaves, but continuously cooled in silicone tub
then cooled so as to maintain temperatures of the fluids at 40 C. ing demonstrated no detectable inactivation.
The fluids were inoculated with a bacterium reported to be Pedi While there is some controversy as to the additional inactiva
ococcus strain NRRL B-2354 prior to exposure. The greatest kill tion of microorganisms over the thermal effect of microwaves,
took place in apple juice (up to 4.6-logs in 1 pass), with moderate this additional inactivation is small and inconsistent. In many
lethality (up to 0.7-logs in 1 pass). occurring in water and 10% studies comparing microwave heating to conventional heating,
glucose. The amount of kill with multiple passes through the sys microwave heating appears less effective due to nonuniform
tem was not constant. In some products the kill rate was reduced heating effects from unpredictability of cold spots and changing
following the first pass. Little or no lethality was demonstrated product parameters, such as specific heat. Therefore, when de
with skim milk, pineapple juice, tomato juice, apple cider, or veloping methods for describing the inactivation kinetics of mi
beer. In addition to the influence of the product itself, the medi crowave heating, it is recommended that only thermal effects be
um used to grow the Pediococcus strain also appeared to affect included in the model.
cells counts; however, none of the product characteristics such as Under the assumption of only thermal effects, the kinetic
insoluble solids, pH, and conductivity could fully explain the parameters presented in Table IA of the Overarching Princi
variation. The authors concluded that they had demonstrated ples are recommended for use in design of processes involving
"significant microorganism kills in some fluids using microwave the microwave treatment of foods. The kinetic parameters
energy at sublethal temperatures." Kozempel and others (2000) used to design thermal processes have been presented and
subsequently designed a new system that was capable of isolat defined in an introductory chapter of the main document. The
ing thermal and nonthermal effects of microwave energy. The pathogens of concern will be the ones defined for thermal pro
system was a double tube that allowed input of microwave ener cessing and described in the Overarching Principles Section 3
gy but removed thermal energy with cooling water. With this sys of this report.
tem, the researchers found no inactivation of Enterobacter aero
genes, E.coli, Listeria innocua, Pediococcus, or a yeast in various 4. Validation/Critical Process Factors
fluids including water, egg white, whole egg, tomato juice or beer
at sublethal temperatures. They concluded that, in the absence 4.1. Identification and Description of Critical Process
of other stresses such as pH or heat, microwave energy did not Factors
inactivate microorganisms; however, they did suggest that micro Time-temperature history at the coldest point determines the
wave energy may complement or magnify thermal effects. In microbiological safety of the process, as in other thermal process

36 JOURNAL.. OF FOOD SCIENCE-Supplement

Microwave and Radio f'requency ...
ing. Once temperature is known at the coldest point as a function sorption. Such coupling could lead to runaway heating (Zhang
of time, accumulated lethality can be calculated following the and others 1999; Zhang and Datta 1999). Figure 3 also illustrates
well-known equation the coupling effect. Initially, at lower temperatures, microwave
(f IO(T-250)/: absorption is lower, so the waves are able to penetrate a lot fur
1
Fa= dt ther into the material. As the material heats up, it absorbs micro
waves more readily and the waves are not able to penetrate as
where Tis the cold point temperature at any time t, z is the z-val far. Especially in foods with high ionic concentrations, the sur
ue in F and t1is the total duration of heating. There are, howev face at higher temperatures can act as a shield.
er, major differences between conventional and microwave heat Since heat is constantly generated everywhere in the food,
ing in terms of the location of the cold point and how time-tem but at different rates, the difference between the temperature at
perature history of the cold point is affected by a number of criti the coldest and the warmest points in the food keeps increasing
cal process factors. Note that the effect ofthe factors are discussed with time. This is unlike conventional heating where the coldest
in a simplistic way in order to illustrate the concepts-the actual in point approaches the warmest temperature of the system (typi
fluence of the factors can be quite complex and are only known cally the heating medium temperature) with time.
from detailed experiment or mathematical modeling. Such effects In conventional heating, the surface is at the highest temper
are discussed in detail in books such as Datta and Anantheswa ature, corresponding to the temperature of the heating medium.
ran (2000), Buffler (1993) and Decareau (1985) or review papers In microwave heating, the food heats up while the surrounding
such as Saltiel and Datta (1998). air stays cold (Datta 2000). The cold air keeps the surface tem
Time-temperature history at the coldest point for a conven perature lower than locations near the surface of food. Surface
tional thermal process is generally quite predictable for a food evaporation, especially when heating an unpackaged food, can
that is all solid or all fluid. For example, for a conduction-heated further decrease the surface temperature. In some heating ap
(solid) food, it is usually the geometric center. In microwave heat plications, such as with frozen foods that are spherical, the sur
ing, even for a solid food, the coldest point is less straightforward face could be the coldest location.
to predict and can change during the heating process (Fig. 3), de In conventional heating, the maximum temperature is limit
pending on a number of food and oven factors (Fleischman 1996; ed by the heating medium temperature, such as steam in a re
Zhang and others 1999). Accordingly, relatively sophisticated tort. Since microwave absorption continuously generates heat,
modeling, based on measured properties of the foods, needs to temperature keeps increasing in the microwave heating process.
be used and subsequently validated to ascertain the location of To keep the temperature within reasonable limits, microwaves
the point oflowest integrated time-temperature history. Well-de need to be turned on and off (cycled) once the target tempera
veloped but simple procedures, such as the Ball formula (Ball ture has been reached.
and Olson 1957) would be much harder to achieve for microwave One ofthe advantages of microwave heating is that the come
heating. Changes in properties during heating have a more pro up time is short. It is this shorter come-up time that helps retain
nounced effect in microwave heating as compared to conven the organoleptic qualities and that is the basis for preferring mi
tional heating. As the food heats, its microwave absorption capa crowave processing to conventional thermoprocessing. In calcu
bility typically increases, which increases the rate of temperature lating the process time, the come-up time in microwave heating
rise and therefore further increases the rate of microwave ab- cannot be given nearly as much importance as in conventional
heating (see Fig. 1).

4.1.1. Factors related to product and package

Food shape, volume, surface area, and composition are critical
factors in microwave heating (Zhang and others 1999). These fac

400

Fig. a-Microwave power absorption IQ In equation 1) patterns In a 100 200

----...----
. . . ~ cabllatian

300 400 500

lltettllzatlon proceu can change dramatically during heating, as shown Volumed...., 111 cylinClnml CXll'llaira (an 1)
by the migration of hottest locations lln red) from Interior Ca) to
surface lb). Shown are computed results for a ham cylinder 10.7% Fig. 4-Magnltude of total absorbed power as a function of volume of
salt) heated In a microwave oven similar to domestic microwave food, obtained from experiments and electromagnetic simulations
ovens jZhang and others 1999) !Zhang and others 1999)

Supplement-JOURNAL OF FOOD SCIENCE 37

~.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
tors can affect the amount and spatial pattern of absorbed energy, Table 2 Critical Procen Factors In Microwave Heating
leading to effects such as comer and edge overheating, focusing, Food Shape, size, composition (moisture, salt. and so on), multiple
and resonance. For example, a cwved shape can focus microwaves components (as in a frozen dinner). liquid against solid
and produce a higher internal rate of heating than near the sur Package Presence of metallic elements such as aluminum foil, susceptor
face (Ohlsson and Risman 1978). Such heating patterns can also Process Power level, cycling, presence of hot water or air around the
food, equilibration time
change with time, as illustrated in Fig. 3. The effect of food volume
Equipment Dimensions, shape and other electromagnetic characteristics of
on total amount of energy absorbed by the food for a given setting the oven, frequency, agitation of the food, presence of mode
of power level is typically as shown in Fig. 4. Since the total energy stirrers and turntables
absorbed lags the increase in volume, average temperature rise
drops (however, food as a whole heats slower).
Composition, in particular moisture and salt percentages, has time" may be necessary before the power output becomes sta
a much greater influence on microwave processing than in con ble. Due to differences in penetrating ability, the frequency of
ventional processing, due to its influence on dielectric proper the microwaves can dramatically affect the heating rates and
ties. High salt and moisture content increases the efficiency of their spatial distribution. In a simplified view, a lower frequency
microwave absorption, thereby decreasing the depth of penetra of 915 MHz has a higher depth of penetration than the 2450 MHz
tion. Thus, interior locations generally get heated less in foods used for home microwaves. At this lower frequency, uniformity of
with high salt or moisture content, reducing microbial destruc heating can improve with reduced edge heating (Lau and others
tion. Composition can also change the thermal properties such 1998).
as specific heat, density, and thermal conductivity and, thereby, Equilibration of the product following heating can help to lev
change the magnitude and uniformity of the temperature rise. el the temperature distribution and improve uniformity. Its im
For example, the temperature of a low specific heat oil increases portant effects have been demonstrated (Fakhouri and Ra
at a much faster rate than that of water when compared at the maswamy 1993; Ramaswamy and Pilletwill 1992).
same level of absorbed power. A summary of the various product, package, process, and
The different components of mixed food products, such as equipment factors discussed above is provided in Table 2. Due
multi-compartment frozen dinners, will heat differently to the number of critical factors implicated, none of them alone
(Ryynanen and Ohlsson 1996; Zhang and others 1999). Packag can be treated as a critical process factor by itself, unless all oth
ing material is also a critical process factor. In contrast to com ers are held constant.
mercial canning, where metal containers offer minimum ther
mal resistance and are not a critical process factor, metallic com 4.1.3. Identification of the effect of process factors on
ponents present in a package, such as aluminum foil and sus cold point using mathematical simulation
ceptors, can dramatically influence the heating rates of the Due to the complexity of the system where the heating pat
packaged food. tern depends on such a large number of factors, simulation
based design can save significant time and resources in develop
4.1.2. Factors related to process and equipment ing microbiologically safe processes. Such simulation-based de
Several process and equipment factors are critical in micro sign can drastically reduce the number of experiments needed to
wave heating (Zhang and others 1999). Design (size, geometry, predict the location of cold points and the time-temperature his
and so on) of the microwave oven can significantly affect the tory at these locations for the actual food and equipment combi
magnitude and/or spatial variation of the power absorption in nations. State of the art commercial software simulating the elec
the product. In addition, presence or absence of devices added tromagnetic and heat transfer properties has been used for mi
to improve uniformity, such as mode stirrers and turntables, are crowave food process design (Dibben 2000; Zhang and Datta
major factors affecting temperature distribution. 2000). Such software can provide a comprehensive insight into
The placement of the food inside the oven can also have a sig the heating process by showing interior power absorption (that
nificant influence on the magnitude and uniformity of power ab is, heating rates) in a 3D object (Fig. 3), difficult using experi
sorption (Zhang and others 1999). Other factors related to the mentation. Simulation-based design can allow the process and
equipment are the temperature of the medium surrounding the equipment designers to judiciously choose proper combinations
product and the level of food surface evaporation (especially sig of food and process parameters in an efficient manner, reducing
nificant for unpackaged food), both affecting food surface tem some of the time and expenses in prototype building. Location of
perature. Cooling effects due to surface evaporation have been coldest point (the critical process factor) and its time-tempera
shown to lead to survival of Trichina larvae in pork (personal ture history can be predicted this way. As the user friendliness,
communication with J. Gerling cited in Datta 1991). accuracy, and linkages with other software improve, more food
Heating of containerized liquids with microwaves without agi processors are expected to use these programs routinely.
tation causes flow and thermal stratification inside the container.
Warmer liquid moves to the top, much like in conventional heat 4.2. Description of Methods to Measure/Monitor
ing. Due to variations in product characteristics (such as viscosi Critical Process Factors
ty), in package components (such as metal in aluminum foil), Monitoring the temperature of microwave processed food
and in equipment factors, the patterns of temperature distribu poses a challenge. Thermocouples and other metallic probes
tion in heated liquids (static or flowing) can be quite complex, used to record temperatures for conventional processing in static
and the slowest heating location needs to be determined for dis systems are generally unsatisfactory for precision temperature
tinctly different situations (Prosetya and Datta 1991; Anan measurements in microwave ovens for several reasons. Firstly,
theswaran and Liu 1994a 1994b; Datta and Hu 1992; Tajchakavit metallic probes reflect and absorb the energy of incident micro
and Ramaswamy 1995). waves, and require special grounding and installation to with
In addition to the aspects discussed above, power level and stand microwave operations. Secondly, electromagnetic field dis
cycling of the microwave input are critical process factors in mi turbances caused by the presence of metallic probes create local
crowave heating. Also, power output by the magnetron (the com ized changes in heating patterns that can produce variability in
ponent in an oven generating the microwaves) changes as the overall heating patterns.
magnetron heats up over time. Thus, equipment specific "wait Valuable alternatives to metallic probes, however, are fiber

38 JOURNAL OF FOOD SCIENCE-Supplement

Microwave and Radio f'requency ...
optic temperature probes. These are on the market and have more difficult to monitor and measurement of power output
been used to monitor temperatures during microwave heating. from microwave generators may not accurately reflect product
They are inert to the electric and magnetic fields of the micro temperature, unless the sensitivity of the heating process to
waves or radio frequencies. Additional advantages are their ac changes in food composition, size, shape, placement in the
curacy (from 0.2 to 0.05 C) and fast response (milliseconds). oven and other factors discussed earlier are taken into consid
Some disadvantages of fiber-optic probes are their current price eration. Due to the complex nature of the process, adjustments
(although it is dropping) and somewhat fragile nature. such as extending the time or increasing the power level will not
be simple. It is generally believed that complete reprocessing
4.3. Description of Microbial or Chemical Surrogates/ would be the most reliable way to handle underprocessed ma
Indicators terial.
For determining the kinetics and efficiency of microwave in
activation of microorganisms, surrogate/indicator microorgan 5.1. Basic Detection Methods for Process Deviations
isms could be selected from those traditionally used in ther Process parameters under direct control of the operator are
mal processing studies. No microorganisms with unique resis the power level (including cycling), spatial distribution of power
tance to microwave processing have been reported in the liter (number and positioning when multiple microwave generators
ature, suggesting that classical surrogates (vegetative cells or are used) and time of exposure. As mentioned above, once a de
spores) would be appropriate for process determination and viation has taken place, adjustments could be complex.
validation. In one implementation (Tops 2000). the exact placement of a
Since microwave or radio frequency processing is primarily a product in the tunnel is known and power levels of multiple mi
heat process, microbiological validation tests should be designed crowave generators are programmed precisely to provide the
using procedures that parallel those used for thermal processing. custom-tailored heating profile for that tray and product. For ex
Important considerations for an inoculated pack study of a new ample, the center of the tray is provided with higher microwave
thermal process include selection of a surrogate microorganism, power. The detection system consists of a variety of monitors. For
preparation and handling of the test microorganism, size and example, broken generators and insufficient power level deliv
volume of inoculum, method of inoculation, processing levels ered by a generator is automatically recorded. Infrared surface
and conditions, number of containers, product data collection, measurement of each tray can be made while they are being
statistical techniques and methods for determining survivors transported to the hold system. Swelling of the top surface of in
(for example, incubation, microbiological recovery). A more de dividual packages due to internal steam generation during heat
tailed discussion of these procedural considerations is available ing is monitored using a distance tracer-adequate heating pro
in the Laboratory Manual/or Food Canners and Processors (Na duces enough steam for the package to swell sufficiently. Visual
tional Canner's Association 1968). The principles and methods control is also made by placing maxi-thermometers (that mea
are similar, whether the objective is pasteurization, pathogen re sure maximum temperatures) at precise locations in the pack
duction, or commercial sterilization. age. An endoscope is also used to observe the heating process in
One problem that needs to be carefully considered is the side the microwave tunnel and therefore to monitor it manually.
method of inoculation. Since microwave heating can be nonuni In another implementation (Harlfinger 1992). power settings
form and the cold spot is not easy to identify, the inoculum for individual magnetrons are stored over time. If the power de
should be distributed throughout the food product. This could livered varies from the set values, an alarm warns the operator.
be a particular problem with solid products, unless made homo An additional warning signal comes from any blockage of the
geneous by grinding or placed in locations where significant spa product feeding system that may lead to unintended cooling of
tial variation in heating rates is expected. the preheated products. This publication also reported the use
The use of history indicators or time-temperature integrators of a DataTrace metallic temperature data-logger inside the pack
(see reviews by Hendrickx and others 1995; Van Loey and others age by 1 company to monitor the time-temperature history. Use
1996), either biological (microbiological or enzymatic) or chemi of such metallic data-loggers requires careful considerations and
cal, could be a way to monitor the process impact and could be interpretations.
helpful in identifying critical process parameters. As in thermal
processing, proper calibration of the kinetic parameters of the 5.2 Methods to Assess and Correct Deviations
surrogates/indicators is required. The same principles as for See general discussions under Section 5.1. above. Details
thermal processing apply and extra care should be given to criti about process deviations are hard to obtain. Only 1 company was
cal factors associated with the microwave/radio frequency heat willing to share information about current production of micro
ing process in that the presence of the indicator should not influ wave pasteurized and sterilized food (Tops 2000). In this compa
ence the heating process. An example is the validation of steril ny's implementation, a product is rejected based on an automat
ization patterns by correlating thermally induced chemical ed control system. Rejection is done at the end of the cooling sys
changes in the food (a history indicator) to bacterial destruction. tem based on infrared surface temperature measurement, de
Intrinsic chemical markers (Kim and Taub 1993; Prakash and tection of broken microwave generators, and other means de
others 1997, Zhang and others 1999) whose extent of formation is scribed in Section 5.1. Further loading of food into that tunnel is
a function of time-temperature history have been used recently automatically stopped following a rejection. The temperature
in several processing situations, including microwave steriliza control system for each microwave tunnel can also be adjusted, if
tion (Lau and others 1999a; Zhang and others 1999; Wig and oth necessary, following a deviation. The control system is also pro
ers 1999). This approach can provide information on spatial dis grammed for each individual product.
tribution of the integrated time-temperature history within a In general, extensive experimentation would be needed to
packaged system and on any variation among packages in a con validate the effectiveness and reliability of the methods to as
tinuous process operation. sess and correct deviations.

5. Process Deviations 6. Research Needs

P rocess deviations in microwave processing present some
special issues and challenges. Temperatures are generally
Research needs have been identified in the following areas:
Effects of food formulation on heating patterns.

Supplement---JOURNM.. OP POOD 8Clf!l:NCB 39

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Effects of equipment design factors, including frequency References
(for example, 915 MHz is sometimes proposed instead of the Akiyama, H. 2000. Otsuka Chemical Co., Ltd., 463 Kagasuno Kawauchi. CHO, Tokushima 771
0193 Japan (contact: Phone 0886-65-6672; Email: [email protected]).
commonly used 2450 MHz for better uniformity of heating). Anantheswaran, R. C. and Liu, L. Z. 1994a. Effect of viscosity and salt concentration on
Development of variable frequency ovens (although cur microwave heating of model nonNewtonian liquid foods in cylindrical containers. J
Microwave Power Electromagnetic Energy. 29:127.
rently more expensive for food applications) for improved unifor Anantheswaran, R. C. and Liu, L. Z. 1994b. Effect of shielding on flow proflles in water in a
mity of heating. cylindrical container during microwave heating. J Microwave Power Electromagnetic
Energy. 29(4):220.
Understanding factors affecting heating patterns, includ Anonymous. 1980. The potential of Bach. Food Manuf. 55(10):53.
ing qualitative changes occurring with frequency changes. Anonymous. 1996. Sterilization surfaces by irradiation with microwaves. NASA Tech Briefs.
140.
Monitoring and real-time adjusting for process deviations Anonymous. 1999. Micro Denshi Co., Ltd., No. 8-25, 2-Chrome Yoshinodai, Kawagoeshi,
in microwave and radio frequency processing. Saitama 350, Japan.
Ball, C. 0. and Olson, F. C. W. 1957. Sterilization in Food Technology. McGraw-Hill Book
Company. NewYork.
Bassani, M. 1999. Personal communication. Micromac Systems.
Bengtsson, N. E. and Green, W. 1970. Radio-frequency pasteurization of cured hams. J Food
Glossary Sci. 35:681-687.
A complete list of definitions regarding all the technologies is Buffier, C.R. 1993. Microwave cooking and processing: Engineering fundamentals for the
food scientist. Van Nostrand Reinhold. New York.
located at the end of this document. Burfoot, D., Griffin, W. J. and James, S. J. 1988. Microwave pasteurization of prepared meals.
Conventional heating. Heating of a substance by transfer of Journal of Food Engineering. 8: 145 I 56.
Burfoot, D., Raiiton, C. J., Foster, A. M. and Reavell, R. 1996. Modeling the pasteurization of
thermal energy from a heating medium at higher tempera prepared meal with microwaves at 896 MHz. J Food Eng. 30:117-133.
ture to a low temperature product. Burton, H. 1949. A survey of literature on bacterial effects of short electromagnetic waves.
Shinfleid, England. National Institute for Research in DairyingShinfield. N. I. R. D. Paper
Focussing. Concentration of electromagnetic waves inside a food No. 1041.
due to its curved surface, much like a lens focussing light Casasnovas, J., Anantheswaran, R. C., Shenk, J. and Puri, V. M. 1994. Thermal processing of
food packaging waste using microwave heating. J Microwave Power Electromagnetic
waves. It leads to enhanced heating at the interior. Energy. 29: 171.
Internal energy generation. Heat generation within a material Chipley, J. R. 1980. Effects of microwave irradiation on microorganisms. Adv Appl Microbial.
Academic Press Inc. 26. 129-145.
and throughout its volume due to the presence of an energy Chiu, C. P., Tateishi, K., Kosikowski, F. V. and Armbruster, G. 1984. Microwave treatment of
source that is dissipated throughout the volume (see volu pasteurized milk. J Microwave Power. 19(4):269-272.
Cross, G. A. and Fung, D. Y. C. 1982. The effect of microwaves on nutrient value offoods. CRC
metric heating). Crit Rev Food Sci Nutr. 16:355-381.
Liquid crystals. Materials with properties that are useful for ther Culkin, K. A. and Fung, D. Y. C. 1975. Destruction ofEscherichia coil and Salmonella typh
imurium in microwave-cooked soups. J Milk Food Technol. 38(1):8-15.
mal sensing. Liquid crystals typically change color with tem Datta, A. K. 1991. Mathematical modeling of microwave processing as a tool to study safery.
perature. American Society for Agricultural Engineers Paper 91-6614.
Datta, A. K. and Hu, W. 1992. Quality optimization of dielectric heating processes. Food
Magnetron. The physical component of a microwave system that Technol. 46(12):53-56.
generates the microwaves. Datta, A. K. and Liu, J. 1992. Thermal time distributions for microwave and conventional
heating of food. Trans I Chem E. 70(C):83-90.
Microwaves. Electromagnetic waves at frequencies 915, 2450, Datta, A. K., Sun, E. and Solis, A. 1994. Food dielectric property data and its composition
5800, and 24225 MHz. based prediction. M.A. Rao and S. S. H. Rizvi(eds.). Engineering Properties of Food. New
York. Marcel Dekker. 457-494.
Non thermal effects. Effects due to the exposure to a process that Datta, A. K. .2000. Fundamentals of heat and moisture transport for microwaveable food
are not of thermal origin, that is, cannot be explained by mea product and process development. A. K. Datta and R. C.Anatheswaran. (eds.). Handbook
of Microwave Technology for Food Applications. Marcel Dekker, Inc. New York.
sured temperature changes. Decareau, R. V. 1985. Pasteurization and sterilization. Microwaves in the food processing
Penetration depth. The distance the electromagnetic waves (of a industry. Academic Press.
Dibben, D. 2000. Electromagnetics: fundamental aspects and numerical modeling. A. K.
certain frequency) travel in a material before it loses 63% of its Datta and Anatheswaran. Handbook of Microwave Technology For Food. Marcel Dek
energy. ker, Inc. New York.
Fakhouri, M. 0. and Ramaswamy, H. S. I 993. Temperature uniformity of microwave heated
Power cycling. The process of the microwave source turning on foods as influenced by product type and composition. Food Res Int. 26:89-95.
and off. Fleischman, G. J. 1996. Predicting temperature range in food slabs undergoing long term low
power microwave heating. J Food Eng. 27(4):337-351.
Radio frequency. Electromagnetic waves at frequencies of 13.56, Fujikawa, H., Ushioda, H. and Kudo?, Y. 1992. Kinetics of Escherichia coli destruction by
27.12 and 40.68 MHz. microwave irradiation. Appl Environ Microbial. 58(3):920-924.
Fung, D. Y. C. and Cunningham, F. E. 1980. Effect of microwaves on microorganisms in
Runaway heating. A cycle of increasing temperature in food foods. J Food Protect. 43(8):641-650.
causing an increasing rate of energy (microwave/ohmic) ab Goldblith, S. A. and Wang, D. I. C. 1967. Effect of microwaves on Escherichia coli and Bacillus
subtiiis.Appi Microbiol. 15(6):1371-1375.
sorption that further increases the rate of temperature rise. It Hamid, M.A. K.. Boulanger, R. J., Tong, S. C., Gallop, R. A. and Pereira, R.R. 1969. Microwave
is more prominent in foods undergoing phase change from pasteurization of raw milk. J Microwave Power. 4(4):272-275.
Harlflnger, L. 1992. Microwave sterilization. Food Technol. 46(12):57-61.
ice to water and in foods containing significant salt and other Heddleson, R. A. and Doores, S. 1994. Factors affecting microwave heating of foods and
ions. microwave induced destruction of foodbome pathogens - a review. J Food Protect.
57(11):1025-1037.
Specific heat. The ability of a material to store heat. Technically Heddleson, R. A., Doores, S. and Anantheswaran, R. C. 1994. Parameters affecting destruc
as the amount of energy required to raise the temperature of tion of Salmonella spp. by microwave heating. J Food Sci. 59(2):447-451.
Hendrickx, M., Maesmans, G., De Cordt, S., Van Loey, A., Noronha, J. and Tobback, P. 1995.
unit mass of an object by a unit increment in temperature. Evaluation of the integrated time-temperature effect in thermal processing offoods. CRC
Variable frequency. Sweeping over a range of frequencies during Crit Rev Food Sci Nutr. 35(3):231-262.
Houben, J., Schoenmakers, L., van Putten, E., van Roon, P. and Krol, B. 1991. Radio-frequen
the microwave heating process to improve uniformity. cy pasteurization of sausage emulsions as a continuous process. J Microwave Power
Volumetric heating. Heating by internal energy generation Electromagnetic Energy. 26(4):202-205.
Jeng, D. K. H., Balasky, G., Kaczmarek, K. A. and Woodworth, A. G. 1987. Mechanism of
throughout the volume of a material (see also internal energy microwave sterilization in the dry state. Appl Environ Microbial. 53(9):2133-2137.
generation). Jeppson, M. R. and Harper, J. C. 1967. Microwave heating substances under hydrostatic
pressure. Cryodry Corporation. US Patent 3,335,253.
Waveguide. The physical component of a microwave system that Kasevich, R. S. 1998. Understand the potential of radiofrequency energy. Chem Eng Progress.
guides the microwaves from magnetron to the cavity where 75-81.
Kazbekov, E. N. and Vyacheslavov, L. G. 1978. Effects of microwave irradiation on some
the food is heated. When applied in the form of pulses, it re membrane-related process in bacteria. Gen Physioi Bio phys. 6:57 -64.
verses the charge for each pulse and pulse intensity gradually Kenyon. E. M., Westcott, D. E., Lacasse, P. and Gould, J. 1971. A system for continuous
processing of food pouches using microwave energy. J Food Science. 36(2):289-293.
decreases. Khalil, H. and Villata, R. 1988. Comparative study on injury and recovery of Staphylococcus
aureus using microwaves and conventional heating. J Food Protection. 51(3):181-186.
We particularly appreciate the following individuals who have either reviewed the docu Khalil, H. and Villata, R. 1989a. A comparative study of the thermal inactivation of B. stearo
ment and provided comments or provided relevant information: M. C. Hendrickx, Kathoiieke thermophilus spores in microwave and conventional heating. Food Engineering and
Universiteit, Leuven, Belgium; JumingTang, Washington State University; Irwin Taub, U.S. Process Applications. New York, NY. Elsevier Applied Science Publishers. I. 583-594.
Army Natick Soldier Center; Tom Yang, U.S. Army Natick Soldier Center; K.P. Sandeep, North Khalil, H. and Villata, R. 1989b. The effect of microwave subiethal heating on the ribonucleic
<:arolina State University; R. C. SwamyAnantheswaran, The Pennsylvania State University; H. acids of Staphylococcus aureus. J Food Protect. 52(8):544-548.
S. Ramaswamy, McGill University; Rudy Tops, Tops Foods, Lammerdries 26, Oien, Belgium Kim, H.-J. and Taub, I. A. 1993. intrinsic chemical markers for aseptic processing of partic

40 JOURNAL OF FOOD SCIENCE-Supplement

Microwave and Radio Frequency
ulate foods. Food Technol. 47(1):91-97, 99. microwave heating conditions. International Conference ofEngineering and Food [ICEF
Knutson, K. M., Marth, E. H. and Wagner, M. K. 1987. Microwave Heating of Food. Lebensm 8]. Poebla, MX.
Wiss Technol. 20: 101-110. Romine, A. and Barringer, S. A. 1998. Dielectric properties of ham as a function of temper
Knutson, K. M.. Marth, E. H. and Wagner, M. K. 1988. Use of microwave ovens to pasteurize ature, moisture, and salt. Atlanta, GA.
milk. J Food Protect. 51(9):715-719. Rosen, C.-G. 1972. Effects of microwaves on food and related materials. Food Technol.
Kozempel. M. F., Annous, B. A., Cook, R. D., Scullen, 0. J. and Whiting, R. C. 1998. lnactiva 26(7):36-40, 55.
tion of microorganisms with microwaves at reduced temperatures. J Food Protect. Rosenberg, U. and Biigl, W. 1987. Microwave pasteurization, sterilization, blanching, and
61(5):582-585. pest control in the food industry. Food Technol. 41(6):92-99.
Kozempel, M., Cook, R. D., Scullen, 0. J. and Annous, B. A. 2000. Development of a process Roussy, G. and Pearce, J. 1995. Foundations and industrial applications ofrnicrowaves and
for detecting nonthermal effects of a microwave energy on microorganisms at low tem radio frequency fields. New York. Wiley.
perature. J Food Processing. In print. Ryynanen, S. and Ohlsson, T. 1996. Microwave heating uniformity of ready meals as affected
KSU. 1999. KSU microbiologist uses microwave, acid treatments to kill pathogens, maintain by placement, composition, and geometry. J Food Sci. 61(3):620-624.
color in meat. KSU Press Release. June 15 1999. Sale, A. J. H. 1976. A review of microwave for food processing. J Food Technol. 11:319-329.
Kudra, T., Van DeVoort, F. R., Raghavan, G. S. V. and Ramaswamy, H. S. 1991. Heating char Saltiel, C. and Datta, A. K. 1998. Heat and mass transfer in microwave processing. Adv Heat
acteristics of milk constituents in a microwave pasteurization system. J Food Sci. 56(4) :931 Transfer. 33:1-94.
934. Schlegel, W. 1992. Commercial pasteurization and sterilization of food products using mi
Lau, M. H., Tang, J., Taub, I. A., Yang, T. C. S., Edwards, C. G. and Younce, F. L. 1998. Microwave crowave technology. Food Technol. 46(12):62-63.
heating uniformity of food during915 MHz microwave sterilization process. Proceedings Schnepf, M. and Barbeau, W. E. 1989. Survival of Salmonella typhimurium in roasting chick
of the 33rd Microwave Power Symposium. 78-81. ens cooked in a microwave, convention microwave and conventional electric oven. J
Lau, M.H., Tang, J.. Taub, I. A., Yang, T. C. S., Edwards, C. G. and Yang, A. P. P. 1999a. Application Food Safety. 9:245-252.
ofchemical markers in assessing heating patterns produced by915 and 2450 MHz micro Stenstrom, L.A. 1974. Method and apparatus for treating heat-sensitive products. Alfa
waves. I-I9. Laval AB. US Patent 3,809,844.
Lau, M. H.. Tang, J., Taub, I. A., Yang, T. C. S., Edwards, C. G. and Younce, F. L. 1999b. HTST Tajchakavit, S. and Ramaswamy, H. S. 1995. Continuous-flow microwave heating of orange
processing offood in microwave pouch using 915 MHz microwaves. A!ChE Annual Meet juice: evidence of nonthermal effects. International Microwave Power Institute. 30(3): 141
ing. 148.
Un, W. and Sawyer, C. 1988. Bacterial survival and thermal responses of beef loaf after Thompson, J. S. and Thompson, A. 1990. In-home pasteurization of raw goat's milk by
microwave processing. J Microwave Power Electromagnetic Energy. 23(3):183-194. microwave treatment. International J Food Microbiol. 10:59-64.
McKinley, G. M. 1936. Short electric wave radiation in biology. B. M. Duggar. Biological Tops, R. 2000. Managing Director, Tops Foods, Lammerides 26, Olen, Belgium Phone:00-32
Effects of Radiation. New York. McGraw-Hill. I. 541-558. (0) 14.28.55.60 Fax: 00-32-(0) 14.22.61.50.
Metaxas, R. and Meredith, R. J. 1988. Industrial microwave heating. Peter Peregrinus. Lon Van Loey, A., Hendrickx, M., De Cordi, S., Haentjens, T. and Tobback, P. 1996. Quantitative
don. UK. evaluation of thermal process using time temperature integrators. Trends Food Sci Tech
Metaxas, R. 1996. Foundations of electroheat: a unified approach. John Wiley & Sons. nol. 7(1):16-26.
Chichester, UK. Vela, G. R. and Wu, J. F. 1979. Mechanism of lethal action of 2,450-MHz radiation on micro
Minert, P. J. and Witt, J. A. 1976. Radio frequency and microwaves. Food Processing Industry. organism. Appl Environ Microbiol. 37(3):550-553.
36-37,41. Villamiel, M., LopezFandino, R. and Olano, A. 1997. Microwave pasteurization of milk in a
Mudgett, R. E. and Schwartzberg, H. G. 1982. Microwave food processing: Pasteurization continuous flow unit. Effects on the cheese-making properties of goat's milk. Milchwis
and sterilization: A review. AlChE Symposium Series. 78(218): 1-11. senschaft. 52(1):29-32.
Mudgett, R. E. 1994. Electrical Properties ofFoods. M.A. Rao and S.S. H. Rizvi(eds.). Engi Welt, B. A., Street, J. A., Tong, C.H., Rossen, J. L. and Lund, D. B. 1993. Utilization of micro
neering Properties of Foods. New York. Marcel Dekker. 389-455. waves in the study of reaction kinetics in liquid and semi-solid media. Biotechnol Prog.
National Canners Association. 1968. Laboratory manual for food canners and processors. 9:481-487.
AVI Publishing Company. I. 1-8, 94-100. Welt, B. A. and Tong, C. H. 1993. Effect of microwave radiation on thiamin degradation
O'Meara, J.P., Farkas, D. F. and Wadsworth, C. K. 1977. Flexible pouch sterilization using a kinetics. J Microwave Power Electromagnetic Energy. 28 (4): 187-195.
combined microwave-hot water hold simulator. Natick, MA. US Army Natick Reseach & Wig, T., Tang, J., Younce, F., Hallberg, L., Dunne, C. P. and Koral. T. 1999. Radio frequency
Development Lab, Unpubllsh Report. (PN) DRYNM 77-120. sterilization of military group rations. AIChE Annual Meeting.
Ohlsson, T. and Hisman, P. 0. 1978. Temperature distribution of microwave heating-spheres Wyslouzil, W. and Kashyap, S. C. 1976. Microwave sterilization of pea flour and pea protein
and cylinders. J Microwave Power. 13(4):303. concentrate. J Microwave Power. 11 (2):212-213.
Ohlsson, T. 1991. Development and evaluation of a microwave sterilization process for Zhang, H. and Datta, A. K. 1999. Coupled electromagnetic and thermal modeling of micro
plastic pouches. 8th World Congress of Food Science and Technology. Toronto, CA. Sept. wave oven heating of foods. J Microwave Power Electromagnetic Energy. 43.
29-0ct.4. Zhang, H., Datta, A. K.. Taub, I. and Doona, C. 1999. Experimental and numerical investiga
Prakash, A.. Kim, H.-J. and Taub, I. A. 1997. Assessment of microwave sterilization of foods tion of microwave sterilization of solid foods. Accepted pending revision in AIChE Jour
using intrinsic chemical markers. J Microwave Power Electromagnetic Energy. 32(1):50-57. nal.
Proctor, B. E. and Goldblith, S. A. 1951. Electromagnetic radiation fundamentals and their Zhang, H. and Datta, A. K. 2000. Electromagnetics of Microwave Heating: Magnitud and
applications in food technology. Advances in Food Research. 3:120-196. Uniformity of Energy Absorption in an Oven. A. K. Datta and R.C. Anatheswaran(eds.J.
Prosetya, H. and Datta, A. K. 1991. Batch microwave heating of liquids: an experimental Handbook of Microwave Technology For Food Applications. New York. Marcel Dekker,
study. J Microwave Power Electromagnetic Energy. 26(4):215-226. Inc.
Ramaswamy, H. S. and Pilletwill, T. 1992. Temperature distribution in microwave-heated Zimmermann, W. J. 1983. Evaluation of microwave cooking procedures and ovens for de
food models. I Food Quality. 15(6):435-448. vitalizing trichinae in pork roasts. J Food Sci. 48:856-860, 899.
Ramaswamy, H., Koutchma, T. and Tajchakavit, S. 2000. Enhanced thermal effects under

Supplement-JOURNAL.. Of' FOOD 9C1BNCB 41

.JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Procefflng Technologies

Ohmic and Inductive Heating

SUDHIR K. SASTRY AND JEFFREY T. BARACH

Scope of Deliverables: This section covers information, where available, on kinetics and relevant safety consider
ations for processing commercially sterile or extended shelf-life products produced by ohmic and inductive heating.
It does not include combinations of other alternate process technologies with ohmic and inductive heating, since
the number of potential combinations is infinite but no information is available.

1. Introduction 1.2. Summary of Mechanisms of Microbial

Inactivation
1.1. Definition, Description and Applications The principal mechanisms of microbial inactivation in ohmic
Ohmic heating (sometimes also referred to as Joule heating, heating are thermal in nature. Occasionally, one may wish to re
electrical resistance heating, direct electrical resistance heating, duce the process requirement or to use ohmic heating for a mild
electroheating, and electroconductive heating) is defined as a process, such as pasteurization. It may then be advantageous to
process wherein (primarily alternating) electric currents are identify additional nonthermal mechanisms. Early literature is
passed through foods or other materials with the primary pur inconclusive, since temperature had not been completely elimi
pose of heating them. The heating occurs in the form of internal nated as a variable. Recent literature that has eliminated ther
energy generation within the material. Ohmic heating is distin mal differences, however, indicates that a mild electroporation
guished from other electrical heating methods either by the mechanism may occur during ohmic heating. The principal rea
presence of electrodes contacting the food (as opposed to micro son for the additional effect of ohmic treatment may be its low
wave and inductive heating, where electrodes are absent), fre frequency (50-60 Hz), which allows cell walls to build up charg
quency (unrestricted, except for the specially assigned radio or es and form pores. This is in contrast to high-frequency methods
microwave frequency range), and waveform (also unrestricted, such as radio or microwave frequency heating, where the electric
although typically sinusoidal). field is essentially reversed before sufficient charge buildup oc
In inductive heating, electric coils placed near the food prod curs at the cell walls.
uct generate oscillating electromagnetic fields that send electric
currents through the food, again primarily to heat it. Such fields 1.3. Summary of Microbial Inactivation Kinetics
may be generated in various ways, including the use of the flow A summary of the available kinetic data is presented in Tables
ing food material as the secondary coil of a transformer. Induc 1 through 3 in Section 3.4. While some evidence exists for
tive heating may be distinguished from microwave heating by non thermal effects of ohmic heating, a larger body of research is
the frequency (specifically assigned in the case of microwaves), needed to understand more fully the mechanisms for microbial
and the nature of the source (the need for coils and magnets for inactivation. For most ohmic processes, which rely on heat, it may
generation of the field, in the case of inductive heating, and a be unnecessary for processors to claim this effect in their process
magnetron for microwave heating). filings; however, if sufficient data is available, it may be possible
Information on inductive heating is extremely limited. A for future processes to be reduced.
project was conducted in the mid-1990s at the Technical Univer
sity of Munich (Rosenbauer 1997), under sponsorship from the 1.4. Summary of Critical Process Factors
Electric Power Research Institute. No data about microbial death Temperature is the principal critical process factor in ohmic
kinetics under inductive heating were published. Thus, the suc heating. As in conventional thermal processes, the key issue is
ceeding discussion focuses on ohmic heating. determining the zone(s) of minimum thermal treatment. Funda
A large number of potential future applications exist for ohmic mentally, there is only 1 critical factor: temperature-time history
heating, including its use in blanching, evaporation, dehydration, of the coldest point. Temperature of an ohmic process, however,
fermentation, and extraction. The present discussion, however, is significantly affected by other factors, which will be discussed
concerns primarily its application as a heat treatment for microbial in greater detail in section 4.1.
control. In this sense, the main advantages claimed for ohmic
heating are rapid and relatively uniform heating. Ohmic heating is 1.5. Other Considerations
currently being used for processing of whole fruits in Japan and While it is possible to envision creative combinations between
the United Kingdom. One commercial facility in the United States ohmic heating and other alternative process technologies, no
uses ohmic heating for the processing ofliquid egg. data are available at this time.
The principal advantage claimed for ohmic heating is its abili
ty to heat materials rapidly and uniformly, including products 2. Pathogens of Public Health Concern Most
containing particulates. This is expected to reduce the total ther Resistant to the Technology
mal abuse to the product in comparison to conventional heating,
where time must be allowed for heat penetration to occur to the 2.1. Identification of Pathogens Resistant to Ohmic
center of a material and particulates heat slower than the fluid Heating
phase of a food. In ohmic heating, particles can be made to heat Since the purpose of this technology is to use the rapid, volu
faster than fluids by appropriately formulating the ionic con metric heating provided by the electrothermal methods, the
tents of the fluid and particulate phase to ensure the appropri most resistant pathogens would likely be the same as those for
ate levels of electrical conductivity. thermal processes. Results to date show that the electric field can

42 JOURN~L OF FOOD 9C1BMCB-Supplement

Ohmic and Inductive Heating ...
only enhance microbial kill, so any additional beneficial effect perature histories. Palaniappan and Sastry (1992) found no dif
will add an extra factor of safety. ference between the effects of ohmic and conventional heat
treatments on the death kinetics of yeast cells (Zygosaccharomy
2.2. Effects of the Critical Process Factors on ces baili11, under identical histories. In some cases, however, a
Inactivation mild electrical pretreatment of Escherichia coli decreased the
Since the main critical process factor is the thermal history subsequent inactivation requirement.
and location of the cold spot, the effects on microbial inactiva More recent studies suggest that a mild electroporation
tion are the same as for thermal processes. Locating cold zones mechanism may contribute to cell inactivation during ohmic
during ohmic heating, however, cannot be extrapolated from cur heating. For example, studies on fermentation of Lactobacillus
rent knowledge of conventional heating and requires special acidophilus under the presence of a mild electric field (Cho and
consideration. others 1996) have indicated that although the fermentation lag
phase can be significantly reduced, the productivity of the fer
2.3. Shape of Inactivation Curve mentation is also lowered by the presence of the electrical field.
Microbial inactivation curves of ohmic heating processes are This may be due to the presence of mild electroporation, which
similar to thermal curves, except for differences in slope (the rate improves the transport of substrates at the early stages of fer
may be enhanced by the electric field) on some occasions. Thus, mentation, thereby accelerating it. At the later stages, the elec
the conventional D- and z-value kinetics, (or, alternatively, rate troporation effect would improve the transport of metabolites
constants and activation energies) are relevant. These are sum into the cell and thereby would inhibit fermentation. The pres
marized in Section 3.4. ence of pore-forming mechanisms on cellular tissue has been
confirmed by recent work (Imai and others 1995; Wang 1995;
3. Mechanisms of Inactivation Kulshrestha and Sastry 1999). Another recent study (Cho and
others 1999), conducted under near-identical temperature con
3.1. Pathogen Culture Maintenance ditions, indicates that the kinetics of inactivation of Bacillus sub
A review of the literature describing the application of ohmic tilis spores can be accelerated by an ohmic treatment. A 2-stage
processing to foods revealed that there are no particular patho ohmic treatment (ohmic treatment, followed by a holding time
gen strains with a unique resistance to the technology. Again, prior to a second heat treatment) further accelerated death rates.
since the predominant method of microbial inactivation is ther A recent study (Lee and Yoon 1999) has indicated that leakage of
mal, thermal death kinetics of pathogens and target spoilage or intracellular constituents of Saccharomyces cerevisiae was en
ganisms would be followed. Therefore, standard published and hanced under ohmic heating, as compared to conventional heat
generally accepted preparing and culturing procedures (Nation ing in boiling water.
al Canners Association 1968) should be used for pathogenic, sur The principal reason for the additional effect of these ohmic
rogate cultures or spores in order to evaluate an ohmic process treatments may be the low frequency (50 - 60 Hz) used, which al
ing unit's ability to inactivate them. Depending on the case, cul lows cell walls to build up charges and form pores (electropora
ture maintenance will be done either by in-house trained staff or tion mechanism). This is in contrast to high-frequency methods
by outside consulting firms that will provide materials for testing such as radio or microwave frequency heating, where the electric
and system validation. As a rule, a surrogate should have the field is essentially reversed before sufficient wall charge buildup
highest heat resistance recognized for that type of microorgan occurs. Some contrary evidence has also been noted. In particu
ism. A biological test culture with substandard heat resistance is lar, the work of Lee and Yoon (1999) has indicated that greater
of little use in evaluating a thermal process. For a detail discus leakage of S. cerevisiae intracellular constituents is detected un
sion of the characteristics of surrogate microorganisms, see Over der high frequencies. The details of temperature control within
arching Principles Section 4. this study, however, are not available at this time, so it is not
Once the key pathogen(s) are selected and the surrogates for known if these researchers had adequately eliminated tempera
them identified, literature and experts in the field can help iden ture effects.
tify suitable culture maintenance and preparation conditions for Little or no information is available regarding the effects on
a process evaluation. survivor counts from ohmic heating processes on post-process
ing storage. In 1 industry study, survivor counts in a pasteurized
3.2. Microbial Enumeration Conditions and Methods liquid egg product decreased over storage time, apparently due
See Overarching Principles Section 2. to injury effects (Reznik 1999). In this study, initial post-pasteur
ization plate counts from conventional (plate) and electroheat
3.3. Detailed Analysis of Inactivation Mechanism(s) ing were similar; however, after 12 wk of storage, many conven
for Pathogens Identified, as a Function of Process tionally heated samples were reported to reach counts of 10,000
Variables, Microbial Repair and Regeneration, and cfu/ml, while the electroheated samples exhibited less than 10
Effects of Post-processing Storage cfu/ml in most samples. No detailed statistical information on
Because the principal mechanisms of microbial inactivation this study is available.
are thermal in nature, processors intending to file ohmic treat
ment processes with FDA should be able to file processes based 3.4. Description of Methods to Measure or
on thermal inactivation. At times, one may wish to reduce the Mathematically Model Pathogen Inactivation
process requirement or to use ohmic heating as a mild processing A summary of the available kinetic data of microbial inactiva
method, such as pasteurization. It may then be advantageous to tion is presented in Tables 1 through 3.
determine if additional non thermal mechanisms exist. While some evidence exists for nonthermal effects of ohmic
Early literature on nonthermal effects has been inconclusive heating, a larger body of research is needed to understand more
(Palaniappan and others 1990). Most studies either did not spec fully the inactivation mechanism of the various microorganisms. For
ify sample temperatures or failed to eliminate temperature as a most ohmic processes, which rely on heat, it may be unnecessary for
variable. It is critically important that any studies comparing con processors to claim this effect in their process filings; however, fu
ventional and ohmic heating are conducted under similar tern ture processes may be reduced, if sufficient data are available.

Vol. 65, No. 4, 2000-JOURN~L. OF FOOD 8C1BNCB 43

JPS: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies
Table 1-D-value and kinetic reaction rate contanta (kJ for Baclllu The rate of heating is directly proportional to the square of
ubtlll pore under conventional and ohmic heating (Cho and oth
era 1999) the electric field strength, E, and the electrical conductivity, u
(Sastry 1994). Since the electrical conductivity of most foods in
D-values, D-values, k, k,
Temperature conventlonal ohmic heating conventional ohmic heating creases with temperature (Palaniappan and Sastry 1991 a, 1991 b;
("C) heating (mln1) (mln1) 1
heating (s ) (a-1) Halden and others 1990), ohmic heating becomes more effective
88 32.8 30.2 0.00117 0.001271
as temperature increases; however, this also raises the possibility
92.3 9.87 8.55 0.003889 0.004489 of runaway heating, (similar to microwaves), and the possibility
95 5.06 0.007586 of arcing due to deposition of proteinaceous material on elec
95.5 4.38 0.008763
97 3.05 0.012585
trode surfaces. Another major factor affecting electrical conduc
99.1 1.76 0.021809 tivity is ionic content. It is therefore possible to formulate prod
z-value ('C) ucts with salt levels designed for effective ohmic heating. The
or Activation
energy
electric field strength may be varied either by changing the elec
(E )(kcal/mol) 8.74 9.16* 70.0** 67.5** trode gap or the applied voltage, although the latter is much
zvalue;
more easily controlled for any given design.
- Activation Energy Other product properties that may effect temperature distri
bution include the density and specific heat of the food product.
Table 2-D-value and reaction rate conatanta for Inactivation of Ba High densities and specific heats are conducive to slower heat
clllu ubtllle pore during Ingle and double atage conventlonal
and ohmic heating at 90 C (Cho and othen 1999)
ing. The thermal conductivity of the food may be of relevance if
the material is heterogeneous, but is of relatively low importance
D-values, D-values, k, k, for homogeneous materials.
conventional ohmic heating conventional ohmic heating
Stage nr heating (mln1) (mln1) heating (s1) (s1) Equipment design is another critical factor that should be con
1
sidered. Some of the designs that are commercially available in
17.1 14.2 0.002245 0.002703
2 9.2 8.5 0.004172 0.004516 clude electrodes that are located at various positions along the
length of the product flow path (in-line field), or those located per
Table 3-Klnetlc reaction rate contanta (k) for Zygoaccharomyce pendicular to the flow (cross-field). The considerations in each of
ballll under conventional and ohmic heating (Palanlappan and othen these cases are somewhat different. In the in-line field design, the
1992) device generally operates at high voltage and relatively low cur
D-values, D-values, k, k, rent. The product heats as it flows through the heater, so its electri
Temperature conventlonal ohmic heating conventional ohmic heating cal conductivity changes over the length. Since the total voltage
("C) heating (mln1) (mln1) 1
heating (9" ) (9"1)
drop in the heater must equal the applied voltage, the material at
49.8 294.6 274.0 0.008 0.009 the upstream end experiences high field strengths, and down
52.3 149.7 113.0 0.016 0.021
55.8 47.21 43.11 0.049 0.054
stream locations experience lower field-strengths. In the cross
58.8 16.88 17.84 0.137 0.130 field design, the field strength is constant throughout the system.
z-value (C) While these are basic designs, a number of other possibilities exist,
or Activation or are in development at this time; thus, it is not possible to
energy
(E )(kcal/mol) 7.19* 7.68* 29.63* 27.77*. present a comprehensive discussion here.
- z-value;
As in other thermal processes, it is necessary to identify the
.. - Activation Energy location(s) of cold zones and their motion. The thermal process
must be sufficient to inactivate target pathogens to the desired
4. Validation/Critical Process Factors extent at the location(s) of least lethal treatment. For a homoge
neous fluid medium, such a position would likely be at the fast
4.1. Identification and Description of Critical Process est moving region.
Factors For the processing of solid-liquid mixtures, the question of the
Since ohmic heating is fundamentally a thermal-based pro location ofleast lethal treatment has received considerable atten
cess, temperature and time are the principal critical process fac tion. Modeling work (de Alwis and Fryer 1990a,b; de Alwis and oth
tors. Ohmic heating is an internal energy generation process, so ers 1989; Fryer and others 1992; Fu and Hsieh 1999), conducted for
there is theoretically no upper temperature limit to the process. a static system, showed the effects of differences in electrical con
Thus, if product hold-up occurs, it is possible for boiling to occur ductivity between a single low- or high-conductivity particle (in
within the system even with a high degree of pressurization. clusion particle) located within a medium of significantly different
As in conventional thermal processes, the key problem is lo electrical conductivity. Sastry (1992) and Sastry and Palaniappan
cating the zone(s) of minimum thermal treatment. Fundamen (1992) showed that the less conductive phase could heat faster
tally, then, there exist only 2 critical factors, temperature and than the fluid, if it was present in sufficiently high concentration.
time of treatment at the coldest zone(s). They also noted that an inclusion particle may provide a worst
Several other factors, however, significantly affect the tem case scenario. Since that time, considerable effort has gone into
perature within an ohmic process. Within a continuous flow ohm determining the worst-case scenario within an ohmic processing
ic heating system, the critical parameters affecting ohmic heat system (Zhang and Fryer 1993; Sastry and Salengke 1998). Unlike
ing include the electrical conductivity(ies) of the respective conventional heating systems, it is not clear that the worst case is
phases of the food, the temperature dependence of electrical necessarily associated with a static situation. Indeed, Khalaf and
conductivity, the design of the heating device, the extent of in Sastry (1996) and Sastry and Salengke (1998) indicated that in sit
terstitial fluid motion, the residence time distribution (if any). uations where the solid is less conductive than the fluid, the worst
thermophysical properties of the food, and electric field case is associated with a well-mixed fluid surrounding the solid;
strength. Although 2 commercial manufacturers currently pro however, when the solid phase is more conductive than the fluid,
duce ohmic systems, no standard or preferred designs are avail the worst case appeared to be the static condition. Further studies
able. Therefore, while a detailed treatment of these factors can by Salengke and Sastry (1999) show that, when the situation fa
not be attempted within the scope of this document, some gen vors a cold spot within the solid phase, the worst-case occurs with a
eral comments may be made. well-mixed fluid (Fig. 1), but when the cold-spot occurs within the

44 JOURNAL OF FOOD SCIENCE-Vol. 65, No. 4, 2000

Ohmic and Inductive Heating ...
fluid phase, the worst case is static (Fig. 2). Davies and others be monitored at the cold zone, which may typically be the fast
(1999) have shown the effects of shadow formation around indi est-moving region of fluid. Temperature measurements are com
vidual solid particles, under a static condition in 2 dimensions. plicated by the presence of an electrical field; thus, the tempera
As the above discussion suggests, 1 critical factor is likely to be ture sensor must be electrically isolated from the surrounding
fat content. If a fat globule is present within a highly electrical con environment. An example of such isolation is a teflon-coated
ductive region, where currents can bypass the globule, it may heat thermocouple.
slower than its surroundings due to its lack of electrical conductivi Currently, there is no physical method available for measure
ty. Under such conditions, any pathogens potentially present ment of temperature within real particulate food products un
within the fat phase may receive less treatment than the rest of dergoing continuous ohmic heating. Measurements have been
the product. Heating of the fat phase may then depend on the conducted with liquid crystal (Sastry and Li 1996), which works
rate at which energy is transferred from the surroundings. Based only for transparent foods, and MRI (magnetic resonance imag
on the foregoing discussion, a high heat transfer coefficient may ing) (Ruan and others 1999), which is limited by the need to tum
not necessarily relate to the worst case, since fluid motion tends to off the electrical field for 14 s during data acquisition.
moderate heating in such situations. If a fat-rich (low conductivi The only other approach appears to be the use of history indi
ty) phase is aligned to significantly intercept the current, it is pos cators (time temperature integrators), either biological (microbi
sible for such a zone to heat faster than the surrounding fluid. In ological or enzymatic) or chemical. The same principles as ther
any case, care must be taken in establishing the process. mal processing apply and extra care should be given to critical
Whatever the scenario under consideration, the worst-case factors associated with the ohmic heating process (the presence
must be accounted for. Particle electrical conductivity and its of the indicator should not influence the heating process). For re
temperature dependence are critical control factors that define cent reviews on time temperature integrators, see Hendrickx and
the worst-case scenario. Additionally, the cold zone may shift others (1995) and Van Loey and others (1996). An application to
considerably during the course of processing, depending on the ohmic heating has recently been described by Kim and others
relative electrical conductivities of phases. The exact details are (1996). If the worst-case scenario for a product could be pre-es
likely to be equipment-specific; thus, a separate analysis may tablished by mathematical models, it would be possible to evalu
need to be conducted for each new system and product. ate total process treatment by such indicators.

4.2. Describe Methods to Measure/Monitor Critical 4.3. Description of Microbial or Chemical Surrogates/
Process Factors Indicators
For single-phase homogeneous fluid foods, temperature may To determine processing kinetics and efficiency of ohmic in-

Fig. 1-Color mapping of modeled temperature distributions within Fig. 2-Color mapping of modeled temperature distributions within
an ohmic heater after 150 of ohmic heating, for a single aolld an ohmic heater after 150 of ohmic heating, for a single solid
c,llndrlcal "lnclualon" particle 1 /3 as conductive as the fluid; (a) well cylindrical "Inclusion" particle twice as conductive as the fluid; (a)
mixed fluid (b) static fluid well-mixed fluid (bl static fluid

Vol. 65, No. 4, 2000-JOURNAL Of' FOOD SCIENCE 45

JPS: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

activation of microorganisms, a surrogate/indicator organism Electroheating. See ohmic heating

would be selected from those microbes traditionally used in ther Inclusion particle. A food particle of significantly different
mal processing studies. No organism(s) with unique resistance to electrical conductivity than its surroundings.
ohmic processing has been reported in the literature, suggesting Interstitial fluid motion. The motion of fluid in the spaces be
that classical surrogates (vegetative cells or spores) would be ap tween solid particles.
propriate for process determination and validation (see Over Nonthermal effects. Effects due to the exposure to a process
arching Principles Section 2). that are not of thermal origin, i.e., cannot be explained by mea
sured temperature changes.
5. Process Deviations and How to Handle Them Specific heat. The ability of a material to store heat. De
Process deviations in this technology are equipment-specific. scribed technically as the amount of energy required to raise
Since no standard equipment design currently exists, the charac the temperature of unit mass of an object by a unit increment
ter of the deviation and the corrective action cannot be charac in temperature.
terized in a simple manner within the scope of this document. Thermophysical properties. Properties that influence the
heating rate of a material. Examples of thermophysical proper
5.1. Basic Detection Methods for Process Deviations ties are thermal conductivity (the ability of the material to con
Depending on the system, the detection methods may in duct heat), specific heat (the ability of the material to store heat),
volve monitoring of particle conductivities, system power input, and density (the mass per unit volume of the material).
and inlet and outlet temperatures. Significant deviations from
operating conditions may indicate an abnormality that is equip References
ment-specific. Further, it is important to protect against unde Cho, H.-Y., Sastry, S. K. and Yousef, A. E. 1996. Growth kinetics of Lactobacillus acidophilus
under ohmic heating. Biotechnol Bioeng. 49(3):334-340.
tectable hazards. Cho, H.-Y., Sastry, S. K. and Yousef, A. E. 1999. Kinetics of inactivation of Bacillus subtilis
One approach to preventing process deviations would be to spores by continuous or intermittent ohmic and conventional heating. Biotechnol Bioeng.
62(3):368-372.
monitor electrical conductivity of the process stream on-line. Sol Davies, L. J., Kemp, M. R. and Fryer, P. J. 1999. The geometry of shadows: effects of inhomo
ids of unusually low or high electrical conductivity could be de degeneities in electrical field processing. J Food Eng. 40:245-258.
Alwis, A. A. P., Halden, K. and Fryer, P. J. 1989. Shape and conductivity effects in ohmic
tected, in principle, and diverted before entering the heater; heating of foods. Chem Eng Res Des. 67: 159-168.
Alwis, A. A. P. and Fryer, P. J. 1990a. A finite element analysis of heat generation and transfer
however, much depends on the sensitivity of the detection tech deduring ohmic heating of food. Chem Eng Sci. 45(6): 1547-1559.
nique and the background noise created by natural variations in de Alwis, A. A. P. and Fryer, P. J. 1990b. The use of direct resistance heating in the food
product electrical conductivity. industry. J Food Eng. 11 :3-27.
Fryer, P. J., de Alwis, A. A. P., Koury, E., Stapley, A.G. F. and Zhang, L. 1992. Ohmic processing
of solid-liquid mixtures: heat generation and convection effects. J Food Eng. 18: I 01-125.
5.2. Methods to Assess and Correct Deviations Fu, W.-R. and Hsieh, C.-C. 1999. Simulation and verification of2-dimensional ohmic heating
in static system. J Food Sci. 64(6):946-949.
Assessing and correcting deviations is not simple, since the Halden, K., de Alwis, A. A. P. and Fryer, P. J. 1990. Changes in the electrical conductivity of
foods during ohmic heating. Int J Food Sci Technol. 25:9-25.
knowledge base is incomplete at this time. As stated above, this Hendrickx, M., Maesmans, G., De Cordt, S., Van Loey, A., Noronha, J. and Tobback, P. 1995.
is a subject that needs further research and separate, design Evaluation ofthe integrated time-temperature effect in thermal processing of foods. CRC
Critical Reviews in Food Science and Nutrition. 35(3):231-262.
specific evaluation. If deviations occur beyond the safety factors Imai, T., Uemura, K., Ishida, N., Yoshizald, S. andNoguchi,A. 1995. Ohmic heatingofjapanese
set by design, then complete product reprocessing may be nec white radish Rhaphanus sativus. lnt J Food Sci Technol. 30:461-472.
Khalaf, W. G. and Sastry, S. K. 1996. Effect oftluid viscosity on the ohmic heating rate ofsolid
essary. As stated above, the information will depend on design, liquid mixtures. J Food Eng. 27:145-158.
and insufficient information is available atthis time. Kim, H.J.. Choi, Y.-M.. Yang. T. C. s.. Taub, I. A., Tempest, P., Tucker, G. and Parrott. D. L. 1996.
Validation of ohmic heating for quality enhancement of foods products. Food Technol.
50(5):253-261.
6. Research Needs Kulshrestha, S. A. and Sastry, S. K. 1999. Low-frequency dielectric changes in vegetable tissue
from ohmic heating. !FT Annual Meeting: Book of Abstracts. p. 211. Chicago, IL.

T HE FOLLOWING AREAS OF RESEARCH NEED TO BE ADDRESSED

before implementing ohmic heating as a preservation method:
Develop a more complete body of knowledge about the
Lee, C.H. and Yoon, S. W. 1999. Effect of ohmic heating on the structure and permeability
of the cell membrane of saccharomyces cerevisiae. 1999 !FT Annual Meeting. Chicago.
July 24-28 1999.
National Canners Association 1968. Laboratory manual for food canners and processors.
combined influence of temperature and electric fields on the de AV! PublishingCompany.1.1-8, 94-100.
Palaniappan, S., Richter, E. R. and Sas try, S. K. 1990. Effects ofelectricity on microorganisms:
struction kinetics of key pathogenic microorganisms. A review. J Food Process Preserv. 14:393-414.
Develop the knowledge base to assess the impact of devia Palaniappan, S. and Sastry, S. K. 1991a. Electrical conductivity of selected solid foods during
tions for specific designs of ohmic heaters. This would include ohmic heating. J Food Process Eng. 14:221-236.
Palaniappan, S. and Sastry, S. K. 1991b. Electrical conductivity of selected juices: influences
improved models for ohmic processes. of temperature, solids contact, applied voltage and patticle size. J Food Process Eng.
Develop methods for monitoring temperatures within indi 14:247-260.
Palaniappan, S. and Sastry, S. K. 1992. Effects of electroconductive heat treatment and
vidual solids. electrical pretreatment on thermal death Kinetics ofselected microorganisms. Biotechnol
Bioeng. 39(2):225-232.
Reznik, D. L. 1999. Personal communication. Raztek Corp, Sunnyvale, CA.
Glossary Rosenbauer, G. 1997. Continuous induction heating ofliquids. Research Institute for Food
A complete list of definitions regarding all the technologies is Technology and Utilization, Technical University of Munich. Unpublished.
Ruan, R., Chen, P., Chang, K., Kim, H.-J. and Taub, I.A. 1999. Rapid food particle temperature
located at the end of this document. mapping during ohmic heating using FLASH MRI. J Food Sci. 64(6): 1024-1026.
Conductivity (Electrical), a. Physical property of a food mate Salengke, S. and Sastry, S. K. 1999. Comparative modeling study of ohmic heating of solid
liquid mixtures. 1999 IFT Annual Meeting. Chicago. July 24-28 1999.
rial that determines its ability to conduct electricity and is ex Sastry, S. K. 1992. A model for heating ofliquid-particle mixtures in a continuous flow ohmic
pressed in Siemens per cm (Siem). In ohmic heating, it enables heater. J Food Process Eng. 15:263-278.
Sastry, S. K. and Palaniappan, S. 1992. Mathematical modeling and experimental studies on
heating to occur. ohmic heating ofliquid-particle mixtures in a static heater. J Food Process Eng. 15:241-261.
Conductivity (Thermal). Physical property of a food material Sastry, S. K. 1994. Ohmic heating. R. P. Singh and F. A. R. Oliveira. Minimal Processing of Foods
and Process Optimization: an Interface. Boca Raton, FL. CRC Press, Inc. 17-33.
which determines its ability to conduct heat. Expressed in Watts/ Sastry, S. K. and Ll, Q. 1996. Modeling the ohmic heating of foods. Food Technol. 50(5):246-248.
meterC. Sastry, S. K. and Salengke, S. 1998. Ohmic heating of solid-liquid mixtures: a comparison of
mathematical models under worst-case heating conditions. J Food Process Eng. 21 :441-458.
Conventional heating. Heating of a substance by transfer of Van Loey, A., Hendrickx, M.. De Cordi, S.. Haentjens, T. and Tobback, P. 1996. Quantative
thermal energy from a heating medium to a low temperature evaluation of thermal process using time temperature integrators. Trends Food Sci Tech
nol. 7(1):16-26.
product. Wang, W.-C. 1995. Ohmic heating offoods: physical propetties and applications. Columbus,
Cross-field. An ohmic heating system where the electric field OH. The Ohio State University.
Zhang, L. and Fryer, P. J. 1993. Models for the electrical heating of solid-liquid mixtures.
is aligned across the product flow path. Chemical Engineering Science. 48:633-643.

46 JOURNAL OF FOOD SCIENCE-Vol. 65, No. 4, 2000

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

High Pressure Processing

DANIEL F. FARKAS AND DALIAS G. HOOVER

Scope of Deliverables: This section covers high pressure processing as an alternative technology for preservation of
foods. It includes critical proc' ess factors, their effect on inactivation levels and mechanisms of inactivation, as well
as pathogens of concern and recommendations for surrogates. Methods to handle deviations are also described.

1. Introduction compression for truly isothermal conditions. Temperature distri

bution must be determined in the food and reproduced each
1.1. Description of Technology treatment cycle if temperature is an integral part of the HPP mi
1.1.1. Process physical description crobial inactivation process specification.
High pressure processing (HPPJ, also described as high hy Foods decrease in volume as a function of the imposed pres
drostatic pressure (HHP), or ultra high pressure (UHP) process sure as shown in Fig. 2. An equal expansion occurs on decom
ing, subjects liquid and solid foods, with or without packaging, to pression. For this reason the packaging used for HPP-treated
pressures between 100 and 800 MPa. Process temperature dur foods must be able to accommodate up to a 15% reduction in vol
ing pressure treatment can be specified from below OC (to mini ume, and return to its original volume, without loss of seal integ
mize any effects of adiabatic heat) to above 100 C. Vessels are rity and barrier properties.
uniquely designed to safely withstand these pressures over Regarding HPP as a food-processing technology, the greater
many cycles. Commercial exposure times at pressure can range the pressure level and time of application, the greater the poten
from a millisecond pulse (obtained by oscillating pumps) to a tial for changes in the appearance of selected foods. This is espe
treatment time of over 1200 s (20 min). In contrast to thermal cially true for raw, high-protein foods where pressure-induced
processing, economic requirements for throughput may limit protein denaturation will be visually evident. High hydrostatic
practical exposure times to less than 20 min. Pressures used in pressures also can cause structural changes in structurally fragile
the HPP of foods appear to have little effect on covalent bonds foods such as strawberries or lettuce. Cell deformation and cell
(Tauscher 1998; 1999); thus, foods subjected to HPP treatment membrane damage can result in softening and cell serum loss.
at or near room temperature will not undergo significant chemi Usually these changes are undesirable because the food will ap
cal transformations due to the pressure treatment itself. HPP pear to be processed and no longer fresh or raw. Food products
may be combined with heat to achieve an increased rate of inac
tivation of microbes and enzymes. Chemical changes in the food
generally will be a function of the process temperature and time
selected in conjunction with the pressure treatment.
Adiabatic Heating
HPP differs from the homogenization of liquids in that de 100---.----------------
compression is achieved by expanding the compressed food 90+--------------~~
against a constraining liquid causing it to do work and thus low
ering its temperature towards its original value. Homogenization 80+-----------~.-c-=-----
dissipates compression work as heat by expanding the product 70-+-------v;;,,--,:::::_~ft".=.
through an orifice or capillary.
HPP acts instantaneously and uniformly throughout a mass
~~~=-9=----~~-~~~~~-
1 50+--r'-'----c=----===------'-'~--=:::.......,.;.;:...~~~~~~~~
~
of food independent of size, shape, and food composition. Thus,
package size, shape, and composition are not factors in process ~w-=-=----c~~~~~-=-"~
determination. The work of compression during HPP treatment ffi~+--~~---~~~~~--
will increase the temperature of foods through adiabatic heating
approximately 3 C per 100 MPa, depending on the composition ~ 20~~;;;;:::::~====~~~~~~
of the food. For example, if the food contains a significant ~ 10---t--------------
amount of fat, such as butter or cream, the temperature rise can
0 I I I I I I I I
be larger. Foods cool down to their original temperature on de
compression if no heat is lost to or gained from the walls of the 0 100 200 300 400 500 600 700 800
pressure vessel during the hold time at pressure. Figure 1 shows PRESSURE- Mpa
typical temperature rises for water and fat as a function of com -----+--- Theory, Water
pression pressures. A uniform initial temperature is required to
achieve a uniform temperature increase in a homogenous sys Measured, Com Oil
tem during compression. ----------
---+-- Measured, Water
While the temperature of a homogenous food (one with less
than 25% fat) will increase uniformly due to compression, the --+-- Measured, Salsa
temperature distribution in the mass of food during the holding
period at pressure can change due to heat transfer to or from the Fig. 1-lncreaH In temperature of water, com oll, and ulu as a
result of Adiabatic CompreMlon (Ting 1998). Note that the lncreau
walls of the pressure vessel. The pressure vessel must be held at In temperature upon compreMlon Is also a function of lnltlal Tem
a temperature equal to the final food temperature increase from perature

Supplement-JOURNAL OF FOOD SCIENCE 47

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

that have been brought to market or that currently employ HPP for 10 min in pH 7.0 phosphate-buffered saline (PBS). The treat
in their manufacture include fruit jellies and jams, fruit juices, ed cells were transferred to pH 3.5 tryptone soy broth and held at
pourable salad dressings, raw squid, rice cakes, foie gras, ham, 37 C for 3 h. Cells treated at pressures of 200 MPa and below
and guacamole. Raw oysters shucked and pasteurized by HPP showed no loss of viability. Cells treated at 300 to 600 MPa were
may become available in 2000. found to die at a rate which increased as a function of pressure
treatment. Studies using a pressure treatment of 400 MPa for 10
1.1.2. The influence of pH, water activity, and min and subsequent holding in media with pH values between
temperature on HPP 7.0 and 3.5 showed that cells were inactivated at pH 4.5 or lower.
Compression of foods may shift the pH of the food as a func The internal pH of the pressure-damaged cells was not a factor in
tion of imposed pressure. Heremans (1995) indicates a lowering their loss of viability. This work shows that acid pH values can
of pH in apple juice by 0.2 units per 100 MPa increase in pres cause inactivation of pressure-damaged cells.
sure. The direction of pH shift and its magnitude must be deter An increase in food temperature above room temperature
mined for each food treatment process. Instrumentation for the and to a lesser extent a decrease below room temperature in
routine measurement of pH at pressures between 100 and 800 creases the inactivation rate of microorganisms during HPP
MPa must be developed as it is not available at the time of this treatment. Temperatures in the range of 45 to 50 c appear to in
review. crease the rate of inactivation of food pathogens and spoilage
The magnitude and direction of the shift of water activity, if microbes and thus merit the development of processes which in
any, as a function of pressure has not been reported. Oxen and corporate a uniform initial food temperature in this range. Pro
Knorr (1993) showed that a reduction of water activity (measured cess temperatures in the range of90-110 C in conjunction with
at one atmosphere) from 0.98 - 1.0 to 0.94 - 0.96 resulted in a pressures of 500 - 700 MPa have been used to inactivate spore
marked reduction in inactivation rates for microbes suspended forming bacteria such as Clostridium botulinum. The use of ele
in a food. Reducing the water activity appears to protect mi vated temperatures as part of a specified HPP process will re
crobes against inactivation by HPP; however, it is to be expected quire monitoring the food temperature during the process to in
that microbes may be sublethally injured by pressure, and re sure every element of the food is at or above the specifieD-value.
covery of sublethally injured cells can be inhibited by low water The effect of temperature on the rate of inactivation of microbes
activity. Consequently, the net effect of water activity may be dif and enzymes subjected to pressure treatment is discussed more
ficult to predict. fully in the section on mechanisms of inactivation (Heinz and
Linton (1999) has shown that pH has a marked effect on inac Knorr 1999). Meyer (2000) has proposed that the heat of compres
tivation rates of Escherichia coli 0157H:7. As pH is lowered, most sion be used in a high-temperature, short-time combined thermal
microbes become more susceptible to HPP inactivation, and and pressure treatment, since the temperature of a product can
sublethally injured cells fail to repair. These observations indi be raised from 100 to 120 C by a quick compression to 700 MPa
cate pH and water activity are critical process factors in the inac and brought back to 100 C by a quick decompression.
tivation of microbes of public health significance in foods treated
by HPP. HPP treatments, in the absence of significant tempera 1.2. Equipment for HPP Treatment
ture increases, do not break covalent chemical bonds. Ionic Equipment for batch HPP treatment of foods is shown sche
bonds such as those responsible for the folding of proteins can matically in Fig. 3 and consists of (1) a pressure vessel of cylindri
be disrupted. The influence of pH on the survival of pressure cal design, (2) two end closures, (3) a means for restraining the
damaged microbes is illustrated by the work of Garcia-Graells end closures (for example, yoke, threads, pin). (4) a low pressure
and others (1998) and Pagan and others (1999). The latter work pump, (5) an intensifier which uses liquid from the low pressure
ers treated E. coli C9490, a pressure-resistant strain taken from pump to generate high pressure process fluid for system com
stationary phase cultures, at 100, 200, 300, 400, 500, and 600 MPa pression, and (6) necessary system controls and instrumenta
tion. The six components of a high pressure processing system
can be arranged to treat unpackaged liquid foods in a semi-con
Water Compression
tinuous manner and packaged foods in a batch configuration.
Semi-continuous equipment is described in Section 1.2.2.
0.25 ~ - - - - - - - - - - - - - - - - - ,
Water 22"C 1.2.1. Batch HPP equipment technology
Batch HPP systems are similar in operation to batch thermal
processing retort systems in that both process cycles consist of
0.2 filling the process vessel with product, closing the vessel, bring
ing the vessel to pressure process conditions, decompressing the
vessel and removing the product. High pressure vessels may op
0 0.15
> erate in a vertical, horizontal, or tilting mode. Pressure vessels ca
"'S Bridgman dala pable of routine operation at pressures over 400 MPa can be built
all! -STd.Eq. of two or more concentric cylinders of high tensile strength steel.
-! 0.1 The outer cylinders compress the inner cylinders such that the
wall of the pressure chamber is always under some residual com
pression at the design operating pressure. Safety codes (ASME
0.05 Section 8, Division 3 of the Boiler and Pressure Vessel Code) re
I quire the inner cylinders to crack to allow leakage to relieve pres
sure and thus avoid catastrophic failure of the pressure vessel
0 +----.----,------.---.---...----1 ("leak before break"). The outer cylinder of a pressure vessel
0 200 400 600 800 1000 1200 may be wire wound or encapsulated in a liquid-filled, perma
nently pressurized, outer cylinder to ensure a cycle life of over
Fig. 2-Fractional decrea- in wolume of water a function of 100,000 cycles at pressures of 680 MPa or higher. The inner cylin
Imposed Pressure (Bridgeman 1912, Ting 19991 der and all parts exposed to water or food should be made of

48 JOURNAL OF FOOD SCIENCE-Supplement

High Pressure Processing ...
stainless steel to avoid corrosion. Systems using high tensile
strength steel (non-stainless) may use a food-approved oil or wa
ter containing FDA- and USDA-approved lubricants, anti-corro
sion agents, and antimicrobial compounds as pressurizing fluids.
Packaged foods treated in systems using a lubricant can be pro
tected during HPP treatment by over-wrapping in a sealed bag.
Preferred practice is to design high pressure food processors with
stainless steel food contacting parts so that filtered, potable, wa
ter can be used as the isostatic compression fluid.
Pressure vessels are available as laboratory units with vol
umes ofO.l to 2 liters. Pilot plant vessels have capacities of 10 to
25 liters while batch production pressure vessels can be supplied
with volumes of several hundred liters. Two or more pressure
vessels can be driven by a single intensifier.
For batch operation, packaged food is loaded into the pres
sure vessel, the vessel is sealed, and process water is pumped
into the vessel to displace any air. When the vessel is full, the
pressure relief valve is closed, and water is pumped into the ves
sel until the process pressure is reached. The rate of compression
is directly proportional to the horsepower of the low pressure
pump driving the intensifier. When the process time is complet
ed, the pressure relief valve is opened and the water used for
compression is allowed to expand and return to atmospheric
pressure. The vessel is opened and the packaged food is re
moved and is ready for shipment. The displacement of air prior
to HPP treatment is done to reduce pumping costs by eliminat
ing air compression. Residual air in the treatment chamber has
no effect on microbial inactivation kinetics of HPP-treated, pack
aged foods. The amount of air in the system is not a critical pro
cess factor.
A 100-horsepower pump can bring a SO-liter vessel to an oper
ating pressure of 680 MPa in 3 - 4 min. Compression time is a
function of pump horsepower. Work must be supplied to com
press water at pressures above 200 MPa. Figure 1 can be used to
estimate the additional water needed to bring a vessel of known
volume to process pressure. The data shown in Fig. I neglect the
expansion of the pressure vessel and associated piping during
compression. Vessel expansion may add several percent to the
vessel volume. A filled 100-liter vessel will require an additional
IS liters of water to bring it to a pressure of680 MPa.
The high cost of pressure vessels, pumps, intensifiers, and
sealing systems requires that the system cycle as many times per
hour as is possible given the hold time at pressure needed to
treat the food. Systems that can perform product loading, vessel
sealing, compression, decompression, unsealing, and unloading
in under 2 min are under design. Target pressure hold times of 5
min or less are desirable. HPP treatments will probably be limit
ed to hold times no longer than 10 min. This is in contrast to
batch thermal processes which many require 60 min to complete
a process cycle.

1.2.2. Semi-Continuous HPP equipment technology

Current semi-continuous systems for treating liquids use a
pressure vessel containing a free piston to compress liquid foods.
A low-pressure food pump is used to fill the pressure vessel. As
the vessel is filled the free piston is displaced. When filled, the
inlet port is closed and high pressure process water is introduced
behind the free piston to compress the liquid food. A process
pressure of680 MPa will result in a 15% compression of the liquid
treated. After an appropriate process hold time, the system is de
compressed by releasing the pressure on the high pressure pro
cess water. The treated liquid is discharged from the pressure
vessel to a sterile hold tank through a sterile discharge port. A low
pressure water pump is used to move the free piston towards the
discharge port. The treated liquid food can be filled aseptically
into pre-sterilized containers.

Supplement-JOURNAL.. OF FOOD SCIENCE 49

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
1.2.3. Continuous HPP process equipment In later years, Timson and Short (1965) pressurized milk at
At the time of this writing no commercial continuous HPP sys 1,034 MPa/35 C for 90 min and learned that approximately
tems are operating. A continuous system must compress the liq 0.05% of the bacterial population was capable of surviving this
uid food, provide a plug flow hold tube or hold vessel to achieve pressure. Microbial analysis identified the survivors as spores of
a specified process time. Next there must be a means to decom Bacillus subtilis and Bacillus alvei. It was suggested that the lethal
press the liquid such that the liquid is caused to do work to avoid effect of pressure was more evident in the solid phase than the
excessive shear and heating. The decompressed, treated liquid liquid phase of water. That is, B. subtilis survived solid-phase
could be sent to a sterile hold tank for eventual aseptic filling. transitions from Ice II, III, and V to Ice I. They found a neutral pH
Homogenizers operating above 100 MPa have been proposed more protective to the spores than acid pH. Additionally, the
as a means for the inactivation of microbes in liquid foods (Moor presence of NaCl or glucose provided protection against the
man and others 1996). Experimental data must demonstrate the damaging effect of pressure encountered at acid and alkaline
efficacy of this equipment as a function of operating pressure. pH. In their 1965 article, W.J. Timson andA.J. Short noted a 1932
Heating effects during decompression must be separated from paper by J. Basset and M.A. Macheboeufwho reported the sur
the contribution made by pressure. vival of spores of B. subtilis exposed to more than I, 724 MPa
(250,000 psi) for 45 min.
1.2.4. Pulsed HPP processing systems At the Institute of Food Technologists Annual Meeting in
Semi-continuous and batch equipment can be adapted to 1974, D.C. Wilson presented a paper reestablishing use of pres
pulsed operation by programming a series of treatment cycles of sure and elevated temperatures as a food preservation method.
short duration prior to discharging the treated food. Preliminary Low pressures of around 140 MPa combined with temperatures
studies (Aleman and others 1996) observed an increase in the in of82 to 103 C were effective for the sterilization oflow-acid foods
activation rate of yeast with multiple-pulsed pressure treat in sealed containers. The combination of mild heat with hydro
ments. The total pulsed exposure time was equal in duration to a static pressure produces a synergistic effect. At 0.35 MPa and 100
single constant pressure treatment. Pulse frequency, and the ra C the D-value is 280 min for gram-positive sporeforming bacte
tio of time intervals at pressure and off pressure, must be consid ria, while at 138 MPa and 100 C the D-value is 2.2 min. Conse
ered. Pulse shape (ramp, square, sinusoidal, or other wave form) quently, substantial reductions in microorganisms can be
must be considered. Section 2.6 (HPP Pulsed Applications) pro achieved when co-treatments of heat and pressure are utilized.
vides a more detailed review of the literature and includes the ef In the 1980s, there was a dearth of information regarding inacti
fect of pulsed pressure treatments on spore inactivation. vation kinetics of HPP for important food microorganisms; how
ever, the current literature is relatively voluminous concerning
1.3. Summary of Critical Process Factors the inactivation of microorganisms (and enzymes) in foods pro
The critical process factors in HPP will be discussed later in cessed by HPP.
the report. They include pressure, time at pressure, time to
achieve treatment pressure, decompression time, treatment 2.2. Microorganisms with greatest pressure resistance
temperature (including adiabatic heating), product initial tem The elimination of spores from low-acid foods presents food
perature, vessel temperature distribution at pressure, product processing and food-safety challenges to the industry. It is well
pH, product composition, product water activity, packaging ma established that bacterial endospores are the most pressure-re
terial integrity, and concurrent processing aids. Other processing sistant life forms known. The most heat-resistant pathogen, and
factors present in the process line before or after the pressure one of the most lethal to human beings, is C. botulinum, primari
treatment were not included. Pressure pulsing would require ad ly types A, B, E, and R As such, C. botulinum heads the list of most
ditional monitoring of pulse shape frequency, and high and low pressure-resistant and dangerous organisms faced by HPP.
pressure values of the pulse. Spores of C. botulinum are among the most pressure-resistant
known. Spore suspensions of strains 17B and Cap 9B tolerated
2. Pathogens of Public Health Concern Most exposures of 30 min to 827 MPa and 75 C (Larkin and Reddy
Resistantto HPP 1999). Among the sporeformers of concern, Bacillus cereus has
been the most studied because of its facultatively anaerobic na
2. l. Historical perspective ture and very low rate of lethality.
The first report of high hydrostatic pressure killing bacteria Normally, gram-positive vegetative bacteria are more resis
was by H. Roger in 1895; however, in food science and technolo tant to environmental stresses than vegetative cells of gram-neg
gy, the most important work involving microbial inactivation was ative bacteria. This observation commonly applies to pressure
that by Bert Hite, published in June of 1899 (Hite 1899). Hite resistance as well. Among the pathogenic non-sporeforming
originally experimented with the application of high hydrostatic gram-positive bacteria, Listeria monocytogenes and Staphylocco
pressure on foods and food microorganisms. He showed that the cus aureus are the two most well-studied regarding the use of
shelf-life of raw milk could be extended by about 4 dafter pres HPP processing. Staphyloccocus aureus appears to have a high
sure treatment at 600 MPa for 1 h at room temperature. Souring resistance to pressure.
was delayed for about 24 h after treatment at 200 MPa. In later There appears to be a wide range of pressure sensitivity among
work, Hite and others (1914) found most pressure-treated fruits the pathogenic gram-negative bacteria. Patterson and others
remained commercially sterile for at least 5 y after processing at (1995) have studied a clinical isolate of E.coli 0157:H7 that pos
pressures ranging from 400 to 820 MPa. Hite's last contribution to sesses pressure resistance comparable to spores. Some strains of
the field was in 1929 (Giddings and others 1929) in which tobacco Salmonella spp. have demonstrated relatively high levels of pres
mosaic virus was treated at pressures above 930 MPa with incon sure resistances. Given these pressure resistances and their im
sistent inactivation. portance in food safety, E. coli0157:H7 and Salmonella spp. are of
Larsen and others (1918) confirmed that HPP can inhibit mi key concern in the development of effective HPP food treatments.
crobial growth and cause cells to die. Vegetative types were killed
after 14 hat 607 MPa. It was recognized that spores of bacteria 2.2.1. Nonsporeforming bacteria
were extremely resistant to inactivation by pressure, but could Heat-resistant bacteria are usually more pressure-resistant
be killed at 1,214 MPa. than heat-sensitive types, but there are notable exceptions. For

50 JOURNAL, OP FOOD SCIENCE-Supplement

High Pressure Processing ...
example, Salmonella Senftenberg 775W is the most heat-resis MPa, E. coli 0157:H7 required 700 MPa, and S. aureus 700 MPa.
tant Salmonella known (Ng and others 1969). Comparison with a The bacteria tended to be more pressure resistant in UHT milk
heat-sensitive strain of Salmonella Typhimurium (D-value at than meat or buffer. The authors remarked that the variability of
57.5 C = 3 min) showed Salmonella Senftenberg 775Wto be con pressure response in bacteria depended upon bacterial strain
sistently more pressure-sensitive (Metrick and others 1989). It differences and different suspending media.
was also found that significant metabolic injury occurred in Sal Patterson and Kilpatrick (1998) used HPP against E. coli
monella that survived pressurization. Recovery of these cells was 0157:H7 NCTC 12079 and S. aureus NCTC 10652 in milk and
possible with incubation at 37 Cina non-selective enrichment poultry. Their findings showed a practical necessity for combined
medium. These data suggest that cells sublethally stressed by use of pressure and elevated temperatures. Alone, neither treat
pressure may be more susceptible to other means of inactiva ment displayed effective inactivation of the pathogens. In UHT
tion. milk, 400 MPa/50 C/1S min reduced populations of E.coli ap
Vibrio parahaemolyticus, a marine bacterium that is also an proximately 5 log cfu/g, and 500 MPa/50 C/1S min delivered re
important foodborne pathogen, is substantially more sensitive ductions of approximately 6 log cfu/ g for S. aureus. In minced irra
to the effects of high hydrostatic pressure than L. monocytogenes, diation-sterilized poultry meat, E. coli was reduced by approxi
an important gram-positive pathogen common in raw foods mately 6 log cfu/g by 400 MPa/50 C/15 min, and S. aureus ex
(Styles and others 1991). A 106-cfu/ml population of L. monocyto posed to 500 MPa/50 C/15 min was reduced by approximately 5
genes is inactivated within 20 min by a 345-MPa pressurization in log cfu/g. Also, polynomial expressions derived from the Gompertz
buffer at 23 C, while a similar concentration of V. parahaemolyti equation were used to devise models to predict inactivation of
cus is eliminated in half the time (10 min) at half the pressure each pathogen at different pressure-temperature combinations.
(173 MPa) in clam juice. Milk, as compared to buffer, offers a pro HPP of L. monocytogenes and Salmonella Typhimurium in
tective effect for L. monocytogenes. This was similar to the protec fresh pork loin was investigated by Ananth and others (1998).
tion afforded to pressurized Salmonella by strained-chicken who found that at 25 C the D-values at 414 MPa were 2.17 min
baby food (Metrick and others 1989). Pressure in combination for L. monocytogenes and 1.48 min for Salmonella 'Iyphimurium.
with low pH between 3.0 and 4.0 in citrate buffer destroyed Liste A treatment of 414-MPa/ 13-min/25 c inactivated either patho
ria monocytogenes populations of approximately 101 cfu/mL with gen inoculated at levels of approximately 10s per chop. There
in 30 min (Stewart and others 1997). Treatment at pressures were also no detectable psychrotrophic plate counts from the
above 304 MPa at less than pH 6.0 also resulted in no detectable pork loin after 7 d of storage at 4 C. After 7 d, plate counts
survivors when Trypticase soy agar plus 0.6% yeast extract was climbed, and at 33 d reached nearly lQ6 cfu/ g. Interestingly, sen
used as the plating medium; however, when Listeria recovery sory analysis (triangle test of difference) showed that samples
agar was used, approximately 102 cfu/mL were recoverable. cooked after pressurization were different (P>0.05) from con
These surviving cells represent an injured subpopulation that trols, but only for samples pressure-treated at 2 C, not at 25 C.
cannot recover at pH less than 5.6. It was determined that, generally, pressure-treated meat was not
Fujii and others (1995) evaluated several plating media to significantly different from controls in sensory quality, and HPP
judge the effect of pressure-induced injury of E. coli, V. para did extend the shelf-life of the product. The effects of HPP on L.
haemolyticus, and L. monocytogenes. These bacteria were pres monocytogenes and pork chops were also studied by Mussa and
sure-treated to generate survival rates of 10 to 50% of the start others (1999) with pressure treatments apparently conducted at
ing viable concentration. Their results showed that plating me ambient temperature. Strain Scott A was found to have a D-value
dia such as Trypticase soy agar and nutrient agar were superior to at 400 MPa of 3.5 min while the indigenous microbiota of the
brain heart infusion agar (BHI) and plate count agar (PCA) in the pork was found to have a D-value at 400 MPa of 1.3 min.
detection of sublethally treated cells exposed to pressure. Detec The effects of HPP on microbial inactivation of E. coli and
tion levels could be improved for BHI and PCA by the addition of Pseudomonas fluorescens in 6%-fat ovine milk was investigated
horse blood. As anticipated, detection was relatively low for se by Gervilla and others (1997a). The strain of E.coli was most re
lective media and variable depending on the selective ingredi sistant when pressure-treated at 10 c and strain of Rjluorescens
ents in these media. was most pressure resistant when pressure-treated at 25 C. E.
Satomi and others (1995a) observed a sharp drop in survivors coli was more pressure resistant than R jluorescens. Inactivation
and injury rate in E. coli above 182 MPa that corresponded to re of >6 log cfu/mL was attained for E. coli when treated at 2:450
lease of UV-absorbing substances. Pressure resistance in E. coli MPa/ 25 C for 5 min and for R fluorescens when treated at 2:400
was not affected by the type of growth media used to propagate MPa/ 10 C for 5 min. When treatment temperatures of 50 C were
the cells nor the presence of oxygen; however, resistance did in used, equivalent reductions of bacterial populations were ob
crease with age of the culture and increase of osmotic pressure in tained with pressures of 400 MPa for E. coli and 300 MPa for R
the pressurizing menstruum. Pressure resistance was reduced jluorescens.
with a decline of pressure menstruum pH and pressure treat In another study by Gervilla and others (1997b), 6%-fat ovine
ment at 44 C. Additional studies by Satomi and others (1995b) milk inoculated with Listeria innocua 910 CECT was investigated
assessed conditions of optimal recovery for E. coli and V. para with special regard to pressure-treatment temperatures. Pres
haemolyticus following exposure to debilitating levels ofHPP. Pa sure treatments at 2 C were more effective inactivating L. innoc
rameters for most rapid recovery of E. coli were nutrient medium ua than at ambient temperature (25 C), but less effective than
with < 1.0% NaCl, pH 7.0 at 30 to 37 C. Most rapid recovery of V. at 50 C. Complete elimination of starting inocula of 101 to 10a
parahaemolyticus occurred when incubation was in aerobic con cfu/mL in ewes' milk was accomplished by the following condi
ditions and nutrient medium of 0.5 to 3.0% NaCl, pH 7.0 at 37 C. tions: 2 C/450 MPa/15 min, 10 C/450 MPa/15 min, 25 C/450
Patterson and others (1995) examined the response to HPP of MPa/15 min, and 50 C/350 MPa/15 min. Five- and 10-min treat
several vegetative types of food-poisoning bacteria. Yersinia en ment periods were also examined, and found to require an addi
terocolitica was the most sensitive bacterium in the study. It was tional 50-MPa increase in pressure for complete inactivation,
reduced 5-log cycles with 275 MPa for 15 min in phosphate-buff with the exception of 5-min treatments at 50 C. The authors not
er-saline (PBS). For comparable 5-log reductions using 15-min ed that the fat in ewes' milk has been shown to confer thermal
treatments, Salmonella Typhimurium required 350 MPa, L. protection for L. monocytogenes and L. innocua, and voiced con
monocytogenes required 375 MPa, Salmonella Enteritidis 450 cern that this same character may increase the resistance of Liste

Supplement-JOURN1'L OP FOOD SCIBNCB 51

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies
ria spp. and other detrimental bacteria treated with combina Butz and others (1990) investigated the effects of pressures
tions of pressure and temperature in ovine milk. between 150 and 400 MPa at temperatures of 25 to 40 C on bac
Listeria innocua 910 CECT was examined in liquid whole egg terial spores and showed that pretreatment at relatively low
by Ponce and others (1998); however, in this product, starting in pressures (60 - 100 MPa) led to accelerated inactivation of spores
ocula of approximately 10s cfu/mL could not be totally inactivat at high pressure. Several papers on the use of HPP to inactivate
ed by 300 to 450 MPa at - 15 to 20 C for up to 15 min. The most spores have made similar suggestions for a two-exposure treat
effective treatment examined in this study (450 MPa/20 C/15 ment with HPP to enhance the inactivation of spores. The first
min) showed a reduction of about 5 log cfu/mL. The effects of exposure germinates or activates the spores, and the second ex
these treatments on the functional properties of the liquid whole posure at a higher pressure inactivates the germinated spores
egg was not noted. and vegetative cells (Heinz and Knorr 1998).
Three strains of L. monocytogenes showed a wide range of Effects of combined pressure (200 and 400 MPa) and temper
pressure sensitivities (Simpson and Gilmour 1997a). Scott A was ature (20 and 90 C) on the reduction of Bacillus stearothermophi
not eliminated by exposure to 450 MPa for 30 min at ambient lus spores have been examined (Seyderhelm and Knorr 1992).
temperature, whereas another strain (a poultry isolate) was elim Limited effects were found when spores were pressurized at 0.1
inated at 400 MPa after 15 min (starting concentration for both 5 MPa (1 atmosphere) in conjunction with temperatures up to 90
x 10a cfu/mL). A third strain, NTCl 1994, was completely elimi C, or 400 MPa and 20 C. Marked effects on spore counts, howev
nated when pressurized at 450 MPa for 30 min. These cultures er, were observed when pressurized between 200 and 400 MPa at
were pressurized in phosphate-buffer-saline (PBS) modified temperatures between 60 and 90 C. Initial counts of 3 x 106 were
with bovine serum albumin (protein), glucose (carbohydrate). reduced to < 10 at 90 C and 200 MPa, at 80 c and 350 MPa, or at
and olive oil (lipid). These components were found to protect 70 C and 400 MPa. Kakugawa and others (1996) also examined
Listeria against pressure inactivation when compared to PBS heat and pressure effects on spore suspensions of B. stearother
alone. Simpson and Gilmour (1997b) examined the pressure re mophilus. Viable counts could be reduced from 10s to 102 spores/
sistance of 13 enzymes from 3 strains of L. monocytogenes that mL in 30 min by treatment at 110 C and 200 MPa, and in 10 min
demonstrated a range of sensitivities to HPP. They found no evi by exposure to 100 C and 400 MPa. Attempts to reduce the via
dent trends between the pressure resistance of any specific en ble spore counts below 102/mL could not be accomplished even
zyme and the strain from which it was derived, suggesting that after 50 min at 120 C and 400 MPa.
none of the selected enzymes was the primary site of pressure in The effect of hydrostatic pressure on activation of Bacillus
activation in L. monocytogenes. spp. spores as a preparatory state for synchronous germination
The variability of pressure resistances within strains of S. au was investigated by Nishi and others (1994). These workers
reus, L. monocytogenes, Salmonella and E.coli 0157:H7 was dem found that activation of Bacillus subtilis spores in milk by 200
onstrated by Alpas and others (1999); however, the range of pres MPa from 25 to 60 C resulted in a greater rate of spore germina
sure resistances with species diminished significantly when the tion than exposure to 80 C. They reported that most of the pres
pressure treatment temperature was raised from 25 to 50 C. sure-activated spores germinated within 1 h of exposure to 37 C
This finding represents another reason to conduct HPP treat as indicated by Joss of heat resistance.
ment with mild heat. Okazaki and others (1996) examined spores of B. subtilis, Ba
As exemplified above in inoculated trials with HPP treatment cillus coagulans, and Clostridium sporogenes PA3679 at pressures
of milk products, L. innocua is a preferred surrogate organism for up to 400 MPa in combination with temperatures ranging from
L. monocytogenes. Listeria innocua fills this role because in addi 25 to 110 C. In phosphate buffer, it was found that for the
tion to its very similar physiology and metabolism with L. mono strains selected, spores of B. subtilis were more pressure-resis
cytogenes, the nonpathogen is equally resistant to low pH, dry tant than spores of B. coagulans, and spores of B. coagulans were
ing, heating and salt. Such hardiness makes L. innocua an excel more pressure-resistant than spores of C. sporogenes. As a result,
lent indicator in inoculated pack studies at dairy facilities and high treatment temperatures were required to eliminate spores
other food processing plants. suspensions of about 107/ mL. At ambient temperature, Craw
In the selection of a gram-negative bacterium as an HPP indi ford and others (1996) were able to reduce C. sporogenes by 5-log
cator organism, a nonpathogenic member of Enterobacteriaceae cycles after 60 min at 680 MPa.
would appear to be a valid choice. A nonpathogenic variety of E. Rovere and others (1996a) examined pressure-treatment pa
coli, selected for notable pressure resistance, would probably be rameters for inactivation of spores of C. sporogenes PA3679 start
the most applicable selection given the concern for E. coli ing with concentrations of approximately 10s spores/mL and
0157:H7. pressure-hold times of 5 min. Elimination of these spore levels
was possible with processes of 1,400 MPa/54 c and 800 MPa/75
2.2.2. Bacterial spores C in different model food systems. In a study involving spore
Unless high hydrostatic pressures in excess of 800 MPa are suspensions of PA3679 in meat broth, Rovere and others (1996b)
used, heat in conjunction with HPP is a requirement for effective noted that pressure acts as a complementary synergistic process
elimination of bacterial endospores in low-acid foods. The arti to allow reduction of the thermal processing parameters neces
cles reviewed in this section indicate the pressure levels, treat sary to eliminate problematic sporeformers in foods. Processing
ment temperatures, and exposure times necessary to inactivate at 108 C/800 MPa was found to be the most effective treatment
spores. The references describe the complex role spore germina with a calculated D-value of 0.695 min. Heat treatment (110 C)
tion plays in this process. Spores present the greatest challenge alone generated a D-value of 13.3 min for spores of PA3679.
for inactivation by HPP. The pressure sensitivity of strains of several species of bacilli
Clouston and Wills (1969) examined the effect of hydrostatic and C. sporogenes PA3679 were evaluated by Gola and others
pressure up to 1700 MPa at 25 c on the heat and radiation resis (1996). Pressure treatments of900 MPa for 10 min at 30 C were
tance of spores of Bacillus pumilus. Initiation of germination oc unable to completely destroy 8.4 x 102 C. sporogenes spores/mL
curred at pressures exceeding 500 MPa and was the prerequisite for in truffle cream. Total inactivation of B. cereus (starting concen
inactivation by compression. It was assumed that there was a net tration 4 x 10s spores/mL), Bacillus licheniformis (6xl0 6 spores/
decrease in the volume of the system during initiation of germina mL) and B. stearothermophilus (4 x 10s spores/mL), in phosphate
tion as a result of increased salvation of the spore components. buffer, were successful using a 20 C double-pulse treatment

52 JOURNAL.. OP f'OOD SCIENCE-Supplement

High Pressure Processing ...
(200 MPa/1 min followed by 900 MPa/ lmin), 800 MPa for 3 min This phenomehon of acquiring resistance by previous expo
at 60 C, and 800 MPa for 3 min at 70 C, respectively. sure to a certain condition is well known in the case of heat expo
Ludwig and others (1992) found that the best conditions to sure. It appears that the high variability of heat resistance of
germinate spores of Bacillus sp. were medium pressure, high spores of clostridia is caused by the immediate environmental
temperature, and some additives such as salts, amino acids, and history of the spores (Jay 1996). For example, spores of the food
glucose. For spore suspensions of B. stearothermophilus exposed pathogen, C. perfringens, vary dramatically in their resistance to
to 250 MPa and 60 C, a biphasic survivor curve was evident. It heat (Weiss and Strong 1967). It is assumed that the wide range
featured a rapid decrease in viability that represented the inacti of heat resistances is due to the diversity of environments from
vation of vegetative cells, followed by a "slow step" that repre which C. perfringens has evolved, as well as the inducible nature
sented the spores. Similar results were obtained using a strain of of spore heat resistance triggered by compounds in the environ
B. subtilis. Ludwig and others (1996) noted that pressure only ment (Alderton and Snell 1969). As such, the heat resistance of
kills the germinated forms of the spores. Data were presented the spore of C. perfringens is chemically reversible between the
showing kinetics of germination as measured by the release of resistant and sensitive states. Heredia and others (1997) demon
dipicolinic acid (DPA). Release was greatest at an ionic strength strated that not only will spores of C. perfringens show increased
of0.14 M NaCl and pressures between 100 and 250 MPa. Full heat resistance by a sublethal heat shock of 55 C/30 min, but
germination (100% DPA release) was strongly dependent on the vegetative cells will become more heat-resistant as well (at
treatment temperature. Optimum germination at 40 C was ob least two-to three-fold). Spores of C. botulinum held in calcium
tained within 30 min at 100 MPa. Additional work by Ludwig and acetate solutions (0.1 to 0.5 M) for 140 hat 50 C raise heat resis
others (1996) showed that ClostridiumsticklandiiATCC 12662, a tance five to ten times, while heat resistance can be lowered by
gram-positive sporeformer, was quite susceptible to HPP. Cul holding the spores in 0.1 N HCl at 25 C for 16 h (Alderton and
tures of lQ9 cfu/mL were eliminated with a 10-min exposure to others 1976). Such phenomena have been indicated by exposure
300 MPa at 37 C, while treatment at 25 C and 300 MPa required of spores to the natural acid conditions of some foods. The extent
30 min for complete destruction. This strain of C. sticklandii also of variability of clostridial spores to pressure is not well known as
showed biphasic kinetics. There was a large, very sensitive popu a function of food composition. This is important, not only be
lation and a smaller, more resistant fraction in the ratio of 106:1 cause of the pathogenic nature of these two species of Clostridi
representing vegetative cells to spores. In addition, Ludwig and um, but because strains of C. botulinum can produce very pres
others (1996) examined the release of dipicolinic acid (DPA) and sure-resistant spores. As stated earlier, spore suspensions of C.
amino acids (as a measurement of germination) by B. subtilis and botulinum 17B and Cap 9B have shown little, if any reduction in
found that optimal release of these components occurred at 110 viability after exposure to 827 MPa at 75 C (Larkin and Red
MPa and 50 to 60 C. The authors recommended that for maxi dy,1999).
mum inactivation of spores of B. subtilis, pressure cycles between Hayakawa and others (1994a; 1994b) found that six cycles of
low (0.1 to 60 MPa) and high pressures (500 MPa) and tempera oscillatory pressurization (5 min each) at 600 MPa and 70 C were
tures as high as possible would represent the best approach. required to eliminate 106 spores/ml of B. stearothermophilus IFO
They added that spore inactivation is best achieved by a com 12550. Continuous treatments at pressures up to 800 MPa and
plex interplay between temperature and pressure effects on ger 70 C for 60 min showed that some spores survived. Attempts
mination and inactivation processes. were made to reduce the treatment temperature for inactivation
Raso and others (1998c; 1998d) presented data indicating of the spore suspensions (106/mL), but the need for an elevated
that the temperature of sporulation affected the pressure resis treatment temperature could not be eliminated. The only treat
tance of spores of the food pathogen, B. cereus. They found that ment that resulted in complete destruction of the spores was the
B. cereus sporulated at a lower temperature (for example, 20 C) oscillatory approach with a treatment temperature of 70 c. Ad
was more pressure-resistant than B. cereus sporulated at a higher ditionally, it was found that a synergistic effect of spore existed
temperature (for example, 37 C) at any water activity (0.92 to with a sucrose palmitic acid ester (<10 ppm) used in combina
0.99) or pH (3.5 to 7.8) of pressure treatment. When germination tion with 60 C for 60 min against spores of B. stearothermophilus
was measured they noted that initiation of spore germination IFO 12550 (Hayakawa and others 1994b).
was also affected by sporulation at lower temperatures. The ba In the comparison of spore suspensions from six strains repre
sis for heightened resistance of the spores was stated to be due senting five different species of Bacillus, Nakayama and others
to the mechanism of pressure inactivation. That is, it occurs in (1996) found no correlation between pressure and heat resis
two stages; exposure to pressure first germinates the spores, tances. Spores remained viable after a treatment of981 MPa at 5
then pressure inactivates the germinated forms. High concentra to 10 c and neutral pH for 40 min. These findings indicated that
tions of sucrose were found to protect the spores from pressure pressure and elevated temperature will inactivate spores (Gould
inactivation. and Sale 1970; Clouston and Wills 1969). Work of Sale and others
Work by Wuytack and others (1998) added further to the clari (1970) showed that exposure to elevated temperature germinat
fication of the mechanism of germination and induced pressure ed spores and made them susceptible to pressure inactivation.
resistance in spores of B. subtilis. They found that germination Not all germinated spores appeared to be inactivated by pres
can be initiated at low (100 MPa) and high (500 MPa) treatments sure. Combined heat and pressure sterilization of low-acid foods
of 30 min; however, germination is arrested by exposure to 500 must be developed to ensure a reliable and safe process.
MPa resulting in a significant portion of the spores becoming For green infusion tea, Kinugasa and others (1992) found that
pressure-resistant, as well as more resistant to hydrogen perox 700 MPa at 70 C for 10 min resulted in a product that could be
ide and UV light. They suggested that the UV and hydrogen per held at room temperature without spoilage. This was true even in
oxide resistance after high pressure treatment was due to the tea inoculated with spores of B. licheniformis, B. coagulans, and B.
presence of more small, acid-soluble proteins after high pressure cereus added at lQ6/mL. HPP was deemed superior to retort pro
treatments. Such findings indicate that exposure of bacterial cessing in that HPP had little or no effect on tea components, in
spores to pressure can result in spores not only more resistant to cluding catechins, vitamin C, and amino acids, as well as taste at
the pressure process itself, but also more resistant to other ac tributes.
companying food preservative methods, which can worsen con As described above, it is evident that in addition to being ex
ditions for effective elimination or reduction of spores. tremely pressure-resistant, bacterial spores are also highly vari

Supplement-JOURN1'L OF FOOD SCIBMCB 53

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
able regarding the level of pressure resistance. This variability ly ineffective. Overall, these results suggest that most human vi
depends on the conditions of their sporulation and pressure ruses will be eliminated in pressure treatments designed for
treatment. Given these characteristics, consistency of spore crop elimination of problematic bacteria (for example, 400 Mpa); how
preparation and standardization of methods are quite important ever, this area requires further investigation before such conclu
for inoculated pack studies using nonpathogenic sporeforming sions can be drawn.
indicator organisms. PA 3679 is a logical choice, given this strain's Selection of a bacteriophage as a nonpathogenic indicator vi
long history in serving as an indicator organism for C. botulinum rus seems to follow current logic. Among viruses, bacteriophage
in the canning industry; however, B. subtilis may be a better are relatively easy to handle and enumerate, and would carry no
choice because spore suspensions of B. subtilis are highly pres risk of infection to humans. The biology of l phage of E. coli is
sure resistant, and as a facultative anaerobe, easier to grow and very well studied and readily available, making it a strong candi
handle. These considerations make spores of B. subtilis a good date.
candidate as an HPP indicator or surrogate.
2.2.5. Parasites
2.2.3. Yeasts and Molds Information is lacking on the pressure resistances of oocysts
Yeasts are an important group of spoilage microorganisms, and spores of Cryptosporidium and Cyclospora, and of protozoans
but none is an important food pathogen. Toxic mold growth is a Entamoeba histolytica and Giardia lamblia. It is reasonable to as
safety concern in foods. Butz and others (1996) examined re sume that the survival forms of these parasites will be signifi
sponses of the heat-resistant molds, Byssochlamys nivea, Bys cantly more sensitive to pressure than bacterial spores and cells;
sochlamysfulva, Eurotium (Aspergillusfischen), Eupenicillium sp. however, these determinations remain to be completed.
and Paecilomyces sp. to HPP (300 to 800 MPa) used in combina The parasitic worms of Trichinella spiralis are killed by a 10-min
tion with different treatment temperatures (10 to 70 C). All the exposure to 200 MPa (Ohnishi and others 1993). These results
vegetative forms were inactivated by exposure to 300 MPa/25 C were obtained by observing the motility of larvae recovered from
within a few minutes; however, ascospores required treatment at muscle tissue following pressure treatment. Even though further
higher pressures. A treatment of 600 MPa at 60 C eliminated all studies are necessary to evaluate the pressure resistance of
ascospores within 60 min except for the ascospores of B. nivea Cryptosporidium and Cyclospora, it is relatively safe to assume that
and Eupenicillium. B. nivea required 800 MPa and a processing parasites are not as pressure-resistant as bacteria. It would seem
temperature of70 c to destroy a starting inoculum of <106/mL reasonable to use a nonpathogenic bacterium as an HPP indicator
within 10 min. A pressure of 600 MPa at 10 C was adequate to organism to judge survival of foodborne parasites. Parasites are
eliminate 101 cfu/mL of Eupenicillium within 10 min. In the range generally quite difficult to obtain and maintain in high quantities
of 4.0 to 7.0, pH was found to have little effect on pressure inacti for process development work involving inoculated pack studies.
vation of Byssochlamys sp. On the other hand, low water activities
(aw = 0.89) increased pressure sensitivity of ascospores as did 2.3.Inactivation of microorganisms in foods
treatment in grape juice (as compared to saline solution). Horie and others (1991) presented work on the development
Although HPP inactivation of molds has not been studied as of pressure-processed jams from the Meidi-ya Food Factory Co.
thoroughly as HPP inactivation of bacteria, a non-producer of in Japan, whose jams and preservatives, marketed in 1991, were
mycotoxins of the Aspergillus spp. would be a logical choice for a the first commercial foods that incorporated HPP for preserva
surrogate mold. Selection of an indicator with a characteristic pig tive purposes. Elimination of yeasts was reported (Saccharomy
mentation, such as Aspergillus niger, would assist in differentiat ces cerevisiae and Zygosaccharomyces rouxiz1 as well as bacteria
ing an indicator mold from background fungi. Processors may (Staphylococcus spp., Salmonella spp. and a coliform). Jams were
not desire release of a "visually vivid" mold in their processing processed at 294 MPa for 20 min with a starting inoculum be
facilities. A less obtrusive aspergilli may be preferred. tween 10s and 10s cfu/mL. Refrigeration of the jam, after pro
cessing, was necessary due to browning and flavor changes
2.2.4. Viruses caused by enzymatic activities and chemical reactions involving
As stated earlier, the first attempt to estimate the pressure oxygen. Taste panels were reported to prefer the pressure-pro
sensitivity of viruses was by Giddings and others (1929) with to cessed varieties to the jams prepared in the conventional man
bacco mosaic virus (TMV). In that study, pressures of 135,000 psi ner. Nutritionally, the pressure-processed strawberry jam re
(920 MPa) were necessary to demonstrate any kind of effective tained 95% of its vitamin C compared to the fresh product.
ness in the inactivation ofTMV; however, among viruses there is Parish (1998) studied HPP applied to non-pasteurized Ham
a high degree of structural diversity and this is reflected in a wide lin orange juice (pH 3.7). The target organism was S. cerevisiae.
range of pressure resistances (Smelt 1998). Human viruses ap He calculated D-values of 4 to 76 s for ascospores treated at pres
pear more pressure sensitive than TMV. Human immunodefi sures between 500 and 350 MPa, respectively. For vegetative
ciency viruses are reduced by 104 to 10s viable particles from ex cells of S. cerevisiae, D-values were between 1 to 38 s. The native
posure to 400 to 600 MPa for 10 min (Otake and others 1997). flora of the orange juice showed D-values ranging from 3 to 74 s.
Brauch and others (1990) showed that bacteriophages (DNA vi Surviving organisms in the orange juice after one to 300 s of HPP
rus) were significantly inactivated by exposures to 300 to 400 treatment were found to be yeasts, and gram-positive and gram
MPa, while Butz and others (1992) found Sindbis virus (a lipid negative rods.
coated virus) relatively unaffected by pressures of 300 to 700 Shelf-life extension of fresh-cut pineapple was achieved by
MPa at -20 C. Shigehisa and others (1996) found that an 8-log application of 340 MPa/ 15 min by Aleman and others (1994). D
plaque-forming unit (PFU) population of herpes simplex virus values, as determined on plate count agar (PCA), were 3.0 min
type l was eliminated by a 10-rnin exposure to 400 MPa, and a 5 for processing at 4 C, 3.1 min when treated at 21 C, and >2.5
log PFU population of human cytomegalovirus was destroyed by min at 38 C. The post-treatment counts on PCA from pressure
a 10-min exposure to 300 MPa. Shigehisa and others (1996) also treated pineapple were <50 cfu/g.
evaluated pressure effects on human immunodeficiency virus HPP inactivation of yeasts and vegetative bacteria in fruits is
(HIV) type 1 and found that a 5.5 log tissue culture infectious very effective because of their inherent low pH. In these prod
dose of HIV type 1 was eliminated after a 10-min exposure to 400 ucts, the limiting parameter is usually the presence of browning
MPa at 25 C. Exposure to lower levels of pressure were essential enzymes. Blanching of the product or use of ascorbic acid in con

54 JOURNAL Of' FOOD SCIENCE-Supplement

High Pressure Processing ...
junction with vacuum treatment to remove oxygen may help re crococcus dominated the flora during refrigerated storage. It was
duce enzymatic browning. noted that fat rancidity was enhanced in the pressurized mack
HPP application on non-heat pasteurized rice wine (Namaza erel, becoming a leading factor in deterioration of the product.
ke) was examined by Hara and others (1990). No viable lactoba In surimi, Miyao and others (1993) found that levels between
cilli and yeasts could be recovered using a treatment at 294 MPa/ 300 and 400 MPa were adequate to kill most of the fungi, gram
10 min/25 C. Processing at 392 MPa resulted in a shelf-stable negative bacteria and gram-positive bacteria (in declining or
product with a taste profile equivalent to the control due to the der). Notable pressure-resistant varieties were found and identi
inactivation of problematic enzymes and microorganisms. fied as Moraxella spp. (viable at 200 MPa), Acinetobacter spp. (vi
Lettuce and tomatoes were inoculated by Arroyo and others able at 300 MPa), Streptococcusfaecalis (viable at 400 MPa), and
(1997) and pressurized at 20 c for 10 min and 10 C for 20 min. Corynebacterium spp. (viable at 600 MPa). These pressure-treat
Microorganisms were not significantly affected at 100 and 200 ed isolates displayed significant lag time upon transfer to nutri
MPa and gram-positive bacteria were not completely inactivated ent medium for batch culture. For example, following exposure to
at 400 MPa (the highest pressure examined). Pressures of 300 400 MPa, growth of S. faecalis was delayed approximately 20 h
and 350 MPa reduced populations of gram-negative bacteria, more as compared to the control. The extracellular release of iron
yeasts and molds by at least one log-cycle; however, in this range and magnesium ions, RNA and carbohydrates was detected after
of pressures, skin loosened and peeled away in tomatoes, and pressurization, suggesting that damage to the membrane oc
lettuce browned. The authors noted that hurdle technology curred and that RNA degradation took place.
would be necessary to maintain the desired sensory quality of
these vegetables while using HPP as a preservation treatment to 2.4.HPP in combination with other processing
lower populations of undesired microorganisms. technologies
HPP was adapted for preservation of spreadable smoked In the case of HPP, a hurdle approach (Leistner and Garris
salmon cream (pH 5.95; aw 0.95) by Carpi and others (1995). 1995) is almost axiomatic for significant widespread use in com
Pressure-treated products were superior to heat-treated creams mercial food processing. The inherent high resistances of bacte
with regard to sensory quality. A 3-min exposure to 700 MPa ex rial endospores and food enzymes are the major challenges to
tended shelf-life at both 3 and 8 C from 60 to 180 d without the broad application of HPP.
changes in the sensory characteristics as compared to the prod A preservative method employing HPP (albeit at significantly
uct before treatment. In inoculated trials at 700 MPa/3 min reduced pressures) is the processing of food under pressure and
(starting inocula 103 to 104 cfu/g), L. monocytogenes, S. aureus, carbon dioxide (Haas and others 1989). This method is often re
Salmonella Typhimurium and lactic acid bacteria were complete ferred to as high pressure carbon dioxide processing, even
ly inactivated while spores of sulfite-reducing clostridia were not though the pressure levels are normally <15 MPa. For example,
affected and enterococci were only partially inactivated. Imme Hong and others (1997) evaluated a COrpressure process for the
diately after treatment the aerobic plate count was 3.0 x 103 cfu/ inactivation oflactobacilli in kimchi (fermented Korean vegeta
g, but after 6 mo ofrefrigerated storage the level was <102 cfu/g. bles, pH-4.2). The optimal process parameters that decreased
Aerobic plate counts were mostly comprised of spores of Bacillus. populations oflactobacilli by 5-log cycles were a 200-min treat
Carlez and others (1994) worked with freshly minced meat ment at 30 C under a CO 2 pressure of6.9 MPa. Ballestra and oth
that was pressure-processed for 20 min at 20 C at 200 to 450 MPa ers (1996) examined pressures of 1.2, 2.5 and 5 MPa at 25, 35 and
and stored at 3 c in air and under vacuum for up to 22 d. They 45 c for the inactivation of E. coli. The higher treatment temper
found treatment at 200 and 300 MPa was somewhat effective in atures permitted a shortening of processing time to approxi
that microbial growth was delayed 2 to 6 d. As one would expect, mately 20 min for elimination of a cell suspension between 109
treatments at 400 and 450 MPa were more effective, reducing to and 1010 cfu/mL in Ringer's solution when pressure was 1.2 MPa.
tal counts of the meat by 3- to 5-log cycles. At the higher levels of At higher pressures, temperature had no effect on efficiency. Al
pressure treatment, pseudomonads were the most problematic though the pressures are modest by HPP standards, the effec
organisms in the meat. Data suggested that approximately tiveness is high due to the antimicrobial effect of carbon dioxide.
0.01 % of the pseudomonads survived exposures to these pres The suggested lethal mechanism is a lowered intracellular pH
sures with subsequent growth at 3 C after a recovery period of 3 caused by penetration of elevated levels of carbon dioxide into
to 9 d. Lactobacilli also responded in a similar manner to such the cell, not by physical rupture of the cell walls or membrane
treatment. At the higher levels of pressure, changes to the color due to the pressure of CO 2 Results were not as conclusive in
and texture of the minced meat were evident. studies by Wei and others (1991). These researchers used 13.7
A "foie gras de canard" (fatty duck liver) was produced with MPa for 2 h at 35 C to kill inoculated Salmonalla Typhirnurium in
incorporation of an HPP preservative treatment by El Moueffak chicken and egg yolk, and inoculated L. monocytogenes in
and others (1995). Microbial analysis did not include an inoculat shrimp, orange juice, and egg yolk. Levels of microbial reduction
ed sample study, but instead foie gras stored 13-d post-slaughter varied considerably depending on the nature of the food and
was used to elevate the native microbial populations and allow treatment conditions. Bacterial reductions ranged from limited
estimation of the extent of inactivation. Compared to classical effect to 9-log cycles. Results were poor for whole egg formula
thermal pasteurization of this product, 400 MPa at 50 C for 10 tions. Enomoto and others (1997) reduced spores of Bacillus
min stabilized the product as shown by reduction of the psy megaterium by 101 cfu/mL 30-h exposures to 5.9 MPa and 60 c,
chrotrophic microbiota, coliforms, and S. aureus below detect above this pressure spore inactivation was lessened. An obvious
able levels with significant reduction of total mesophilic counts commercial limitation for pressurized carbon dioxide is the
to approximately 102 cfu/g. Treatment at 300 MPa was found to lengthy processing times necessary to allow for diffusion of car
be ineffective for foie gras. bon dioxide into microbial cells. Carlez and others (1992) investi
Fujii and others (1994) monitored changes in sensory quality gated the effect of supercritical carbon dioxide on the inactiva
and bacterial levels in minced mackerel pressure-treated at 203 tion rate of Citrobacter freundii at pressures of 230 MPa at 35 c.
MPa for 60 min and stored at 5 C. Growth of bacteria was de This treatment did not affect the rate of inactivation. The pH of
layed for approximately 4 d with populations of species of Bacil the meat did not drop below 5.7 and the concentration of carbon
lus, Moraxella, Pseudomonas and Flavobacterium no longer evi dioxide in the meat was calculated to be 6.5 g/kg. Citrobacter fre
dent after pressurization. Coryneforms, Staphylococcus and Mi undii was recommended as a surrogate for Salmonella spp.

Supplement-JOURNAL. Of' FOOD 9C1BNCB 55

.Jf"S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Combination treatments of HPP and irradiation have been and 600 mg/L of a-terpinene, but sensitive to a concentration of
investigated by several laboratories. Paul and others (1997) tar 1,250 mg/L. When 150 mg/L of a-terpinene was combined with
geted staphylococci in Jamb meat. A population of approximately exposure to 177 MPa for 1 h at 25 c a reduction of 6-log cycles
104 staphylococci/g was reduced by only 1-log cycle by either was found. A 3-log cycle reduction was found with similar pres
treatment with gamma irradiation (1.0 kGy) or HPP (200 MPa for sure parameters but replacement of the a-terpinene with 200
30 min). When used in combination, no staphylococci were found mg/L (+)-limonene.
immediately after completion of the tandem process. After 3 wk Ishiguro and others (1993) examined the inactivation of B. co
of storage at Oto 3 C, mannitol-negative staphylococci (presum agulans in tomato juice with addition of the antimicrobial com
ably coagulase-negative as well) were detectable (<103 cfu/mL). pounds polylysine, protamine, and an extract of etiolated seed
Crawford and others (1996) were able to eliminate C. sporogenes lings of adlay. Polylysine and protamine were ineffective pro
in chicken breast using combinations of HPP and irradiation. cessing aids; in fact, these compounds conferred protection to B.
Raso and coworkers have combined heat, pressure and ultra coagulans in the tomato juice treated at 400 MPa. The adlay ex
sound. The pressures used in such combinations are significant tract did demonstrate enhanced destruction of B. coagulans, im
ly lower than the magnitudes traditionally used in HPP (for ex proving inactivation by approximately l log cfu/mL after 100
ample, instead of MPa, kPa levels are used). Raso and others min. The treatment temperature was not specified; regardless,
(1998a) found heat and ultrasound to act independently under treatment times of 100 min are not commercially practical.
pressure. To a large extent it appeared that the individual contri
butions of heat and ultrasound under pressure depended upon 2.5.HPP pulsed application
the temperature. Above 58 C, any added inactivation caused by As described earlier in the report, use of pressure-pulsing or
pressure disappeared. These results suggested that inactivation oscillatory pressure treatments has been shown to be generally
was not a simple additive reaction of the three treatment types. more effective than equivalent single pulses or continuous pres
D-values recorded for Y. enterocoliticaATCC 9610 were 1.39 min surization of equal times (Hayakawa and others 1994a; 1994b).
at 59 C, 1.5 min for the highest ultrasound setting (150 db at 20 This enhanced inactivation has been found not only with spores,
kHz), and 0.28 min for a treatment of300 kPa and 150 db (ultra but also with yeasts and vegetative bacteria. The difference in
sound) at 30 c. In this study, Y. enterocolitica was suspended in effectiveness varies, and the measure of improved inactivation
citrate-phosphate buffer (pH 7.0) and the treatment chamber by pulsed pressurization must be weighed against the design ca
volume was 23 mL. pabilities of the pressure unit, added wear on the pressure unit,
Raso and others (1998b) found that a 12-min treatment of500 possible detrimental effect to the sensory quality of the product,
kPa and 117 db at 20 kHz killed approximately 99% of a spore and possible additional time required for cycling.
suspension of B. subtilis ATCC 9372 in Mcilvaine citrate-phos Aleman and others (1994; 1996) conducted studies on com
phate buffer (pH 7.0). The sporicidal effect depended upon the parison of static versus pulsed pressure applications in the inac
static pressure, amplitude of ultrasonic waves, and the treat tivation of S. cerevisiae in pineapple juice. They found that
ment temperature. Above 500 kPa, additional increments of pulsed pressure treatments were more effective than static ap
pressure did not increase the amount of spore inactivation. In plications over comparable lengths of time. For example, it was
the range of 70 to 90 C, a combination with 20 kHz, 300 kPa, 117 shown that a total exposure time of 100 s with repetitive pulses of
db for 6 min had a synergistic effect on spore inactivation. 0.66 s of on-pressure and 0.22 s off-pressure inactivated 4 log
Many different antimicrobial compounds have been used in cfu/mL of S. cerevisiae. A comparable reduction using one static
combination with HPP in a hurdle approach. Examples include pulse at the same pressure required 5 to 15 min; however, they
HPP and lytic enzymes (lysozyme; Popper and Knorr 1990), HPP did discover that the pressure-pulse profile was critical for the in
and antimicrobial chitosans (Papineau and others 1991), and HPP activation of this yeast. Some ratios of pulsing negated any inac
and bacteriocins. Use of nisin with pressure has been addressed tivation and fast sine wave forms allowed total survival of the
by several laboratories. Roberts and Hoover (1996) examined the yeast population.
concurrent use of nisin with pressure treatment on B. coagulans Palou and others (1998) compared oscillatory application of
7050. While pressure alone (up to 400 MPa) had no effect in reduc HPP to single, continuous pressure treatments using Z. bailii.
ing the number of viable spores when treated at neutral pH and These workers found that cyclic applications improved inactiva
ambient temperature, the use of a 400 MPa/70 C/30 min pres tion of the yeast in sucrose-modified (aw 0.98) Sabouraud glu
sure treatment at pH 4.0 and 0.8 IU/mL nisin resulted in the steril cose broth (pH 3.5). To detect a significant difference from a
ization of spore crops containing 2.5 x 106 cfu/mL. single pulse, however, at least two 5 min cycles were needed.
Kalchayanand and others (1998) examined the effectiveness of Three cycles of 5-min each were necessary to generate a 1-log
the pediocin AcH in combination with HPP. The goal of this work cfu/mL difference in plate counts at the 276-MPa level as com
was to identify those HPP /AcH treatments capable of inactivating pared to a continuous application of 15 min. Come-up time was
within 5 min 107 to 1()11 cfu/mL of S. aureus, L monocytogenes, S. Ty approximately 2.7 min at 276 MPa and decompression was nor
phimurium, E. coli 0157:H7, Lactobacillus sake, Leuconostoc me mally< 15 s It was assumed that the greater rate of inactivation
senteroides, Serratia liquefaciens and Pseudomonas fluorescens in of the yeast due to oscillatory HPP was due to greater injury to
0.1 %-peptone water. This could not be accomplished using HPP the cellular membrane from rapid changes in intracellular/ex
treatments of345 MPa/50 C/5 min, unless 3,000AU/mL ofpedio tracellular differences at the membrane interface.
cin AcH were included in the peptone water. Of the gram-negative Besides pressure-pulsing, another modification to pressuriza
bacteria, E.coli 0157:H7 strain 932 was the most pressure resis tion mechanics is the use of very rapid pressure release (mea
tant, while for the gram-positive bacteria in the study, L sake FMl sured in milliseconds). Rapid decompression can be attained in
and L mesenteroides Ly were the most barotolerant. In earlier work, pressure units designed with a "knuckle" (a quick-release joint in
Kalchayandand and others (1994) had evaluated the hurdle com the connecting rod linked to the piston applying pressure to the
bination of electroporation with HPP and bacteriocins against var chamber) that permits a very rapid but controlled release of high
ious gram-negative and gram-positive bacteria. pressure. It is believed that rapid decompression invokes cavita
The monoterpenes were investigated by Adegoke and others tions in the cells and spores that result in physical disruption
(1997) in combination with HPPversus S. cerevisiae. Alone, S. cer and death. This approach is still quite novel and further informa
evisiae IFO 10149 was found to be resistant to exposure to 300 tion is presently quite limited.

56 JOURNAL OF FOOD SCIENCE-Supplement

High Pressure Processing ...
2.6. Shape of inactivation curve mercially sterile) products, having a water activity close to one,
The shape of an inactivation curve resulting from the pres and pH values less than 4.0, can be preserved using a pressure of
sure treatment of a pure culture of microbes inoculated into a 580 MPa and a process hold time of 3 min. This treatment has
buffer may show a shoulder or an initial lag period, followed by been shown to inactivate 106 cfu/g of E.coli 0157:H7, Listeria spp.,
first-order inactivation kinetics for the intermediate treatment Salmonella spp., or Staphylococcus spp. in salsa and apple juice.
period, and finally tailing as the surviving number of microbes Acid foods between the pH values of 4.0 and 4.5 can be made
approach < 1000 cfu/ g. In some cases plate counts of survivors commercially sterile using a pressure of 580 MPa and a hold time
will increase or decrease if measured after a significant time lag of 15 min. Products would have an initial temperature (IT) in the
between HPP treatment and dilution and plating. Inactivation range of 22 C. Shorter hold times are possible if the product is to
curves for natural flora in a food or for challenge microbes inocu be refrigerated. Actual hold-time values must be determined
lated into a food can demonstrate a shoulder, a possible first-or from challenge packs and storage studies perhaps twice the
der inactivation period, and then tailing. Some food products length of the intended shelf-life of the product.
may demonstrate extreme tailing due to spores normally present Low-acid products can be pasteurized by HPP that is rendered
in the food; however, inactivation curves showing predominantly free of pathogens normally associated with the product; however,
first-order kinetics are presented by Zook and others (1999), and satisfactory guidelines for hold times at 580 MPa for low-acid food
Sonoike and others (1992), who have developed complete pres pasteurization have not emerged. For example, the post package
sure-temperature D-value response surfaces for Lactobacillus HPP pasteurization of vacuum-packed cured meat products to
casei and E.coli strains based on first-order inactivation kinetics. eliminate Listeria spp. represents a useful application of HPP.
A biphasic pressure inactivation is frequently encountered Ground beef can be pasteurized by HPP to eliminate E. coli
for both vegetative bacteria and endospores. At the attainment 0157:H7, Listeria spp., Salmonella spp., or Staphylococcus spp.
of pressure, an immediate consistent rate of inactivation is real Much more work is required to develop a suggested hold time at
ized that within a few minutes of pressurization changes to a 580 MPa due to the potential for tailing and the growing capability
more reduced rate of inactivation. Such an inactivation curve in of detecting a single viable pathogen cell in a batch of treated
dicates the residence of a small pressure-resistant sub-popula product. Changes in product color and appearance may limit the
tion. In such instances, two rates (or two D-values) can be calcu usefulness of HPP treatment pressures above 200 to 300 MPa.
lated, often regardless of the type of microorganism evaluated.
On occasion the reduced rate curve can flatten or level off, sug 3. Mechanism of Inactivation
gesting that additional time at pressure has no effect on further
reducing the remaining microbial population. Microbiologists are 3.1. Culture maintenance history
increasingly capable of detecting vegetative pathogens dam Cells at exponential phase of growth are generally more sus
aged by non-thermal treatments at levels approaching one cfu/ ceptible to injury and inactivation than cells at stationary phase
g. Furthermore, the capability of some vegetative pathogens to of growth. Cultures that are old tend to be more resistant to inac
infect humans at concentrations below one cfu/ g may require a tivation by most food processing methods; however, the physio
zero tolerance for these microbes in foods. Tailing phenomena logical state of bacteria does not appear to be a significant factor
should be investigated carefully in challenge studies. The use of if the HPP treatment has been developed to eliminate all micro
pathogens rather than surrogates for highly infective pathogens organisms of safety concern. The physiological age of bacterial
may be advised. cells would seem to play a more important role in those instances
where HPP is used as a pasteurization treatment to reduce the
2.7. Summary of responses of microbes to HPP and number of organisms of concern in a food to a level of acceptable
commercial implications risk. For example, the work of Berlin and others (1999) showed
Food processors who wish to use HPP to preserve foods would that cultures ofV. vulnificus and V. parahaemolyticus that entered
benefit from a specified limited number of pressure-time combi the dormant state of viable but non-culturable, were just slightly
nations. These combinations would be proven to inactivate 10s more pressure-resistant than control cultures. This enhanced re
per gram of key food pathogens such as E.coli 0157:H7, Listeria sistance was so small it was deemed not to be a factor contribut
spp., Salmonella spp., or Staphylococcus spp. in acid foods held at ing an HPP process deviation.
room temperature and in low-acid refrigerated foods. At this time Pagan and Mackey (1999) examined pressure-resistant
there are only a limited number of HPP-preserved products in (C9490) and pressure-sensitive (8003) strains of E. coli to deter
the market place and thus only a limited amount of industrial ex mine the effect of growth phase on inactivation rate. Both strains
perience is available upon which to base commercial processes. were prepared for treatment using cells taken from exponential
Specified pressure-time combinations would help equipment and stationary growth phases. Cells were exposed to pressures
companies develop accurate process cost estimates for the HPP between 100 to 500 MPa at room temperature for 8 min. Viability
treatment of foods. Process costs are related to operating pres was determined by plate counts. Membrane damage was deter
sure, hold time at pressure, and operating costs for maintenance, mined by uptake of the fluorescent dye propidum iodide (Pl)
power and labor. The capital cost of high pressure equipment in and loss of ability to plasmolyze in the presence of 0.75 NaCl.
creases exponentially with increasing operating pressure. Pro The stationary phase cells of the pressure-resistant strain,
cess costs are a direct function of process hold time and operat C9490, showed no loss of viability below 500 MPa while cells of
ing costs. Thus, a minimum HPP treatment cost per kilo of food 8003 showed some inactivation at 100 MPa. C9490 retained its
based on a given yearly production rate will depend on the oper ability to plasmolyze in a strong salt solution while 8003 lost
ating pressure and hold time specified for the process. some ability to plasmolyze. When PI was present during pressure
Current practical operating pressures for commercial HPP treatment, both strains took up the dye at pressures above 100
food treatment intensifiers and pressure vessels are in the range MPa. The degree of staining was greater in the pressure-sensi
of580 MPa (85,000 psi). If this pressure is specified, then the fol tive strain, 8003. Pl added after compression was not taken up by
lowing process times may be considered as first estimates for ini either strain. Exponential growth phase cells of both strains
tial process planning. It must be understood that actual process showed no difference in pressure resistance. Loss of viability be
parameters must be developed from challenge test packs. gan for both strains with an 8 min pressure treatment at 100
Experience with acid foods suggests that shelf-stable (com MPa. At 200 MPa, viable numbers had been reduced by 6- to 7

Supplement-JOURH1'L Of' FOOD 9C1BNCB 57

.JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Jog cycles. There was post-compression uptake of PI and Joss of and Bender 1987). Enzymes vary in their sensitivities to denatur
ability to plasmolyze. ation. It is assumed that in some organisms denaturation of key
These results showed that exponential phase growth cells are enzymes by pressure plays an important role in pressure-induced
pressure-sensitive and cannot reseal pressure-damaged mem death and injury. Factors that induce enzyme inactivation are the
branes. Stationary phase cells appear to be able to reseal mem alteration ofintramolecular structures and conformational chang
branes damaged during pressure treatment after decompres es at the active site (Suzuki and Suzuki 1962). Enzyme inactivation
sion. The degree of pressure resistance appears to be related to under pressure is also affected by pH, substrate concentration,
the cells' ability to repair leaks after decompression. Storage tem and subunit structure of the enzyme (Laidler 1951).
perature after pressure treatment can affect the rate ofleaky cell Pressurized membranes normally show altered permeabili
membrane repair. Refrigerated temperatures can prolong the ties. A reduction in volume occurs along with a reduction in the
time required to repair leaky membranes. cross-sectional area per phospholipid molecule. It is generally
As noted earlier, Raso and others (1998d) presented data on felt that for microorganisms the primary site of pressure damage
the effect of sporulation conditions on pressure resistance for B. is the cell membrane (Paul and Morita 1971). Pressure-induced
cereus. They found that B. cereus sporulated at a lower tempera membrane malfunctions cause inhibition of amino acid uptake
ture (for example, 20 C) was more pressure resistant than B. probably due to membrane protein denaturation. Numerous
cereus sporulated at a higher temperature (for example, 37 C). studies have shown Joss of intracellular constituents from micro
organisms after pressure treatment. Leakages of these compo
3.2. Microbial enumeration conditions and methods nents from the cells indicate damage to the cellular membrane,
It is believed that nearly all microorganisms will respond in a and the higher the amount Jost from cells correlates with a great
general manner to conditions of stress and lethality in their envi er degree of death and injury.
ronment. There has been no documentation to suggest that the Bacteria with a relatively high content of diphosphatidylglyc
response of a microorganism to hydrostatic pressure is a unique erol (shown to cause rigidity in membranes in the presence of
biological event that requires any revised technology for enu calcium) are more susceptible to inactivation by HPP (Smelt and
meration of viable cells. Most of the studies described earlier em others 1994). Conversely, those compounds that enhance mem
ploy general plating media for enumeration of microorganisms. brane fluidity tend to impart resistance of the organism to pres
In some cases, specific types of media are used which are de sure (Russell and others 1995). Yano and others (1998) isolated
signed for the microorganism(s) of study. Since actual growth (vi two taxonomically unidentifiable bacteria, strains 16Cl (faculta
ability) is of foremost concern in the assessment ofHPP effective tively barophilic) and 2D2 (obligately barophilic) from the intes
ness, traditional plating methods have been used exclusively. tinal contents of deep-sea fish retrieved from depths of 3,100
It has long been recognized that pressure will sublethally and 6, 100 m, respectively. In these bacteria there was a general
stress bacteria (Metrick and others 1989). The response is similar trend from saturated to unsaturated fatty acids (especially
to that of heat injury. Therefore, when the extent of microbial in docosahexaenoicacid, DHA, 22:6n-3) in the membrane with ex
activation due to HPP is being assessed in pure culture or food, posure to increasing magnitudes of pressure with growth. Their
microbiological media that allow for detection of all viable organ results suggested that DHA is an important factor in maintaining
isms of concern, both injured and non-injured, should be select membrane fluidity under pressure. Furthermore, this same com
ed. Nutrient-rich environments are normally required for cellular positional change in the membrane was evident in strain 16Cl
repair. Under otherwise optimal conditions, psychrotrophic or with growth at low temperatures.
ganisms have the potential to recover at refrigeration tempera At pressures greater than 500 MPa, it is not uncommon to
tures, while mesophiles require temperatures closer to body view physical disruption to the surface of intact cells using scan
temperature to recover from pressure-induced injury and to re ning electron microscopy. At levels <500 MPa, it is possible to ob
sume replication. serve internal cellular damage using transmission electron mi
croscopy. Perrier-Cornet and others (1995) measured cell volume
3.3. HPP mechanisms of inactivation during high pressure application with an image analysis system
The various effects of high hydrostatic pressure can be connected to a light microscope. For Saccharomyces spp., 250
grouped into cell envelope-related effects, pressure-induced cel MPa generated an observed compression rate of 25% with partial
lular changes, biochemical aspects, and effects on genetic mecha irreversibility of cell compression (10%) upon return to atmo
nisms. It has been established that cellular morphology is altered spheric pressure. The occurrence of mass transfer implied cell
by pressure, and that cell division slows with the application of in disruption or increase in membrane permeability.
creasing pressures. Hydrostatic pressures of 100 to 300 MPa can Iwashasi and others (1993) suggested that the damage
induce spore germination and resultant vegetative cells are more caused by HPP was essentially equivalent to the damage caused
sensitive to environmental conditions (Gould and Sale 1970). by high temperature and oxidative stress in yeast. The cellular
As a general rule (LeChatelier's Principle), pressure enhances membrane was noted as the primary lesion site. Their conclusion
reactions that lead to volume decrease, and reactions involving was based on observations of the tolerance of strains of S. cerevi
increases in volume are generally inhibited or reduced by pres siae (including HPP-resistant strains) to different applications of
sure application (Johnson and Campbell 1945). The response of heat shock and recovery and to different growth phases. Compa
proteins to pressure varies largely because hydrophobic interac rable effects were found with HPP, heat treatment, and exposure
tions act in a peculiar manner under pressure. Up to pressures of to oxidative stress. It was suggested that plasma-membrane AT
100 MPa, hydrophobic interactions tend to result in a volume in Pase may be the key component in tolerance of many environ
crease, but beyond this pressure range a volume decrease is as mental stresses in Saccharomyces spp.
sociated with hydrophobic interactions and the pressure tends
to stabilize these reactions (Suzuki and Taniguchi 1972). Conse 3.4. Mathematical models for microbial inactivation
quently the extent of hydrophobicity of a protein will determine, by heat and pressure
to a large degree, the extent of protein denaturation at any given When foods are subjected to high pressure the compression is
pressure (Jaenicke 1981). Among proteins, important sites for instantly transmitted through the hydrostatic media to the mi
pressure inactivation of microbial cells are enzymes, especially crobes in the food. Compression appears to affect microbial inac
membrane-bound ATPases (Mackey and others 1995; Marquis tivation by altering the proteins responsible for replication, in

58 JOURNAL. OF FOOD SCIENCE-Supplement

High Pressure Processing ...
tegrity, and metabolism. High pressure will not break covalent matic inactivation kinetics.
bonds, but will alter hydrogen and ionic bonds responsible for It is recommended that high pressure microbial and enzyme
holding proteins in their biologically active form. Thus, observed inactivation kinetic data obtained by the pressure treatment of
microbial inactivation kinetics can be postulated to be the result foods be obtained at temperatures in the range of OC. This tem
of the irreversible denaturation of one or more critical proteins in perature may be considered as a base temperature. Biologically
the microbe. Since the ease or difficulty of irreversible protein active proteins of interest in food preservation and processing
denaturation is a function of protein structure, a wide range of show minimal activity. Zook and others (1999) illustrate this ap
pressure resistances must be expected among vegetative mi proach in determining the pressure inactivation of yeast as
crobes. Smelt (1998) showed a six-fold range in D-values among cospores in orange and apple juice. Lildemann (1992) shows
100 strains of L. monocytogenes. curves for the true density of water as a function of temperature
Also cell repair can take place after pressure or mild heat treat and pressure.
ment. This indicates that a critical protein was denatured, but repair
proteins possibly were not damaged so that the critical protein 3.4.2. Importance of temperature
could be repaired. Repair can be affected by food composition. Ac Proteins show a critical temperature Tc at which heat dena
ids in foods may inhibit repair of damaged cell proteins and thus turation begins at 0.15 MPa. The rate of irreversible protein de
appear to make a microbe more sensitive to pressure or heat. naturation appears to increase according to Eq. (2) as the tem
perature is increased above the critical temperature. Proteins
3.4.1. Absolute reaction rate theory also show a critical pressure Pc at which irreversible protein de
Research on the effects of pressure on proteins shows a close naturation starts at a temperature ofO C. The rate of protein de
parallel between heat and pressure activation and reversible naturation with increased pressure above Pc should be de
and irreversible inactivation of proteins. Kinetic models for acti scribed by Eq. (3). Thus there is a need for experimental data
vation and irreversible inactivation of proteins by heat and pres comparing the inactivation of microbes or the denaturation of
sure have been proposed by Johnson and Eyring (1974). The enzymes by pressure at OC so that the results can be compared
theory of absolute reaction rates is based on the formation of an with heat treatments carried out at 0.15 MPa. It is suspected that
unstable intermediate complex which decomposes at a rate the change in the activation volume AV* of a critical protein in a
which is fixed by the temperature of the system. Thus the rate of microbe, or of an enzyme undergoing irreversible pressure dena
the reaction, whether it is an enzyme-catalyzed reaction or an ir turation, is very sensitive to small changes in temperature above 0
reversible protein denaturation reaction, will be controlled by C. This may explain why microbial inactivation kinetic data, taken
the rate of formation ofthe activated complex. This rate (at 0.15 at room temperature, with no temperature control during com
MPa) is a function of the "Gibbs free energy change in going from pression, is so difficult to interpret with the mathematical models
the normal to the activated state" (Johnson and Eyring 1974). used in heat inactivation kinetics. Protein denaturation by pres
The effect of a temperature change on the rate of a biological sure appears to be a far more subtle process than heat denatur
reaction is given by the Arrhenius equation: ation. Much more research appears to be needed before the ef
fects of pressure on irreversible protein denaturation can be pre
k = Ae-E/RT (l) dieted at temperatures above OC (Smelt and Hellemons 1998).
The best that can be done at this time is to define a process
where A, a constant, and k, the reaction velocity, are experimental using the parameters of initial temperature, compression time,
ly determined. This equation (Eq. 2) can be written to determine product temperature, process pressure, and process hold time at
E, the activation energy, if the rates of the reaction, kn and kTO, are pressure, and reproduce these conditions for every batch of food
known at two temperatures, TI and T0. Pressure is constant. treated. This requires careful monitoring of food composition in
cluding pH and water activity. These critical process factors are
E =RX 2.3 [log kn - logkTO] / [(l/T0 ) - ( 1/ T1 )] (2) discussed in the next section.
where R is 2 (calories/ C-mole), 2.3 converts from natural to com
mon logarithms, and temperature is in degrees Kelvin. A similar 4. Validation/ Critical Process Factors
equation (Eq. 3) can be written for the effect of pressure on a re
action at constant temperature (that is, 0 C). In this case the vol 4.1. Critical process factors
ume change of activation Av is the change in the volume be 4.1. l. Type of microorganism
tween the activated complex and the reactants. For proteins this Gram-positive bacteria are usually more pressure resistant
would be the change in volume between the activated protein than gram-negative bacteria (although there are notable excep
and its irreversibly denatured protein form. tions). The more developed (evolutionarily) the life form, the
more sensitive it is to pressure.
AV* = 2.3RT [ log kp1 - log kpol / [p 1 - Pol (3)
4.1.2. Culturing or growth conditions and age of the
where the pressure is in atmospheres, R = 82 (cm3 /mole), and microorganisms
the temperature is in degrees Kelvin. In general, cells in the exponential growth phase are more
The process of pressure treating a food always results in a pressure-sensitive than cells in the stationary phase. Incomplete
temperature increase due to the work of compression. By con inactivation of microorganisms by pressure will result in injured
trast, the warming of a food by heat transfer (at 0.15 MPa) does cells capable of recovery under optimal growth conditions.
not result in a pressure increase in the food. For this reason care
must be taken in keeping a food sample at constant temperature 4.1.3. Composition, pH, and water activity of the food
during pressure treatment or determining the temperature of Pressure inactivation rates will be enhanced by exposure to
the food during compression and decompression. Most food re acidic pH. Low water activities appear to prevent inactivation.
searchers working on pressure treatment of foods do not control Compression of foods may shift the pH of the food as a function
the temperature during pressure treatment. Temperature con of imposed pressure. Heremans (1995) indicates a lowering of
trol would be necessary to obtain meaningful microbial or enzy pH in apple juice by 0.5 units per 100 MPa increase in pressure.

Supplement-JOURNAL. OP FOOD SCIBNCB 59

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
The direction of pH shift and its magnitude must be determined for organisms by pressure, as discussed in section 2.5. Other second
each food treatment process. As pH is lowered most microbes be ary factors are unknown at this time of writing.
come more susceptible to HPP inactivation, and recovery of suble
thally injured cells is reduced. Ionic bonds, such as those responsi 4.2. Measurement of critical process factors
ble for the folding of proteins, are influenced by pH and also can be Currently, HPP is a batch or semi-continuous operation, since
disrupted by pressure. Instrumentation for routine measurement volume containment is necessary to generate the high pressure
of pH between 100 and 800 MPa must be developed. used in food treatment. Batch and semi-continuous treatment
The magnitude and direction of the shift, if any, of water ac makes testing of samples before and after treatment necessary.
tivity as a function of pressure has not been reported. Oxen and It is also necessary to have a hard copy record of the pressure in
Knorr (1993) showed that a reduction of water activity from 0.98 the process vessel for each batch and for each treatment cycle in
1.0 to 0.94 - 0.96 resulted in a marked reduction in inactivation the pressure vessel of a semi-continuous unit. If temperature is
rates for microbes suspended in a food. Reducing the water ac specified as an integral part ofthe preservation process, the in
tivity appears to protect microbes against inactivation by HPP. ternal temperature of the pressure vessel must be recorded in
On the other hand, it is to be expected that microbial cells may hard copy at a point representing the temperature distribution
be sublethally injured by pressure, and recovery of sublethally in the vessel used to develop the process. The initial tempera
injured cells can be inhibited by low water activity. Consequent ture (IT) of the food must be controlled as a critical process fac
ly, the net effect of water activity may be difficult to predict. tor. Key measurements to be taken and recorded over the
Foods are more pressure-protective for microorganisms than course of treatment would be pressure, time, and temperature.
buffers or microbiological media. Product composition and pH should not change at the initial
and termination points of the process. Package integrity should
4.4.4. Temperature, pressure magnitude, rate of also be monitored.
compression, and holding time at pressure
Increasing the pressure magnitude, time, or temperature 4.3. Microbial surrogates/indicators for HPP
of the pressure process will increase the number of microor validation
ganisms inactivated (with bacterial endospores the excep Because some types of spores of C. botulinum (for example
tion). An increase in food temperature above room tempera strains 178 and CAP 98) are capable of surviving even the most
ture and to a lesser extent a decrease below room temperature extreme pressures and temperatures ofHPP. there is no absolute
has been found to increase the inactivation rate of microor microbial indicator for sterility. To date, no nonpathogenic spore
ganisms during HPP treatment. Temperatures in the range of forming bacterium has been found that can endure the high
45 to 50 C appear to increase the rate of inactivation of food pressures and temperatures observed with C. botulinum strains
pathogens and spoilage microbes and thus merit the develop 178 and CAP 98.
ment of processes which incorporate a uniform initial food For vegetative types of bacteria, nonpathogenic L. innocua
temperature in this range. Process temperatures in the range has become a favorite surrogate for the foodborne pathogen, L.
of 90 - 110 C in conjunction with pressures of 500 - 700 MPa monocytogenes. Listeria are very hardy, gram-positive bacteria
have been used to inactivate spore-forming bacteria such as that have demonstrated reasonable resistance to HPP. These
C. botulinum. The use of elevated temperatures as part of a bacteria are also commonly found in a range of raw foods, both
specified HPP process will require monitoring the food tem animal and plant derived. Hence, L. innocua is a logical test or
perature during the process to insure every element of the ganism for HPP validation.
food is at or above the specifieD-value. The effect of tempera Patterson and coworkers have examined a clinical isolate of E.
ture in the rate of inactivation of microbes and enzymes sub coli 0157:H7 that can endure exposures to HPP almost equiva
jected to pressure treatment is discussed more fully in the sec lent to that for spores of Bacillus and Clostridium. A nonpatho
tion on mechanisms of inactivation. genic strain of Bacillus may be useful, since spore suspensions
There is a minimum critical pressure below which microbial are more easily stored and contained than vegetative bacteria.
inactivation by pressure will not take place regardless of process Section 6.2 lists a number of pathogens, spoilage, and possible
time. Important items of information not to be overlooked in surrogate microbes.
HPP are the come-up times (period necessary to reach treatment
pressure), pressure-release times, and changes in temperature 5. Process Deviations
due to compression. Obviously, long come-up times will add ap
preciably to the total process time and affect the product
throughout, but these periods will also affect inactivation kinet
P ROCESS DEVIATIONS ARE EXPECTED IN ANY MANUFACTURING
process. Once critical process factors are identified and their
values established, limit values for each critical process factor
ics of microorganisms; therefore, consistency and awareness of must be established. In addition, a plan needs to be prepared to
these times are important in the process development of HPP. determine corrective actions in case a process deviation occurs.
Temperature increases due to compression can be 3C or more The corrective action would depend on the magnitude that the
per 100 MPa. Zook and others (1999) were able to get first-order critical process factor deviates from the established limit(s).
inactivation curves with no induction period or tailing with S. cer This section identifies critical process factors considered in
evisiae ascospores in orange, apple, and a model juice system, high pressure food preservation. The critical process factor iden
using pressures ranging from 300 to 500 MPa. They took care to tified must be monitored by appropriate transducers. Types of
eliminate any significant temperature increase in their samples transducers are described along with their accuracy and preci
due to compression by cooling their samples and the equipment sion, and appropriate location in the pressure vessel. This sec
used to compress them. tion also discusses methods for periodic calibration of instru
mentation. Process control systems are identified for generating
4.1.5. Secondary factors permanent process records, identifying process deviations, and
Other factors influence the effectiveness of HPP. For example, for determining when and which type of corrective action should
the redox potential of the pressure menstruum may also play a be taken based on the magnitude of the deviation. The control of
role in the inactivation for some microorganisms (Hoover 1993). a high pressure process used for the preservation of food re
Addition of bacteriocins may influence the inactivation of micro quires transducers for the measurement of pressure, time, and

60 JOURNAL OF FOOD SCIENCE-Supplement

High Pressure Processing ...
temperature of the process. The following is a list of transducers, the outlet pipe to recycle product, produced during any process
their precision and accuracy, and their location in the vessel. deviation, back to the inlet pipe for reprocessing.

Measuring Transducer Accuracy/ Precision Location In Pressure Vessel 5.1.3. Pulsed systems
Pressure Gauge (Electronic) + / - l /2% / 3.4 MPa Any place in high pressure system Pulsed systems can be semi-continuous or batch. The actual
Pressure Gauge (Dial Display) + / - 1% / 6.8 MPa Any place in high pressure system pressure treatment cycle is equal to a batch process with more
Temperature (Thermocouple) + / - l /2% / 0.5 c Vessel cold point or its equivalent than one pressure cycle used to treat the food. Thus the critical
Time (Recorder) + / - I% / one second (not applicable) process factors to be controlled are those shown in 5.1.1. for
batch systems and 5.1.2. for semi-continuous systems.
Pressure and temperature transducers used in validating and
controlling a process should be calibrated periodically against 5.2. Methods to assess deviation severity
traceable instruments. The frequency of calibration will be a The development of a valid HPP process must include infor
function of the number of pressure cycles and must be deter mation on the limits of critical process factors. These limits must
mined by testing. include appropriate corrective actions as a function of the severi
ty of each deviation. A cumulative estimate of deviation severity
5.1. Detection methods should show several critical process factors deviations simulta
It is recommended that the critical process factors of an HPP neously. Corrective action will depend on the severity of the de
process be monitored and recorded in the form of a hard copy viation incident. For example, complete Joss of process pressure
record. The recording system used must contain instrumenta before the process is complete could require reprocessing. A 10%
tion that will signal process deviations outside the limits devel Joss of process pressure, for a known time, could be corrected by
oped in the validation of the process. The critical process factors adding additional holding time on the process at the specified
and parameters to be controlled for batch, semi-continuous, and pressure, provided the pressure could be returned to the speci
pulsed HPP. including processes where temperature is specified, fieD-value immediately after the deviation.
are as follows.
5.3. Corrective actions
Batch Systems Corrective actions will reflect the cumulative severity of the
Critical Detection and Method for process deviations identified. It is recommended that the vali
Process Factor Deviation Determination dation of a process for the high pressure preservation of food
include studies on the effect of process deviations of various
Product initial Periodic temperature measurement
magnitudes. For example, it is known that decompression can
temperature of product temperature and plotting
be accompanied by product cooling. For processes specifying a
of values on a control chart showing
process temperature, a pressure drop can mean both a pressure
lower limits.
and temperature deviation. The cumulative effect of the devia
tion must be determined during the validation of the process if
'fime to bring vessel Printed record of pressure against
corrective action for this deviation is proposed during the pro
to pressure time with controls set to indicate a
deviation if pressure is not achieved cess.
within a specified time period.
5.4. Sample deviation
Pressure of vessel Printed record of pressure against It is proposed that a single sample be considered a lot and be
during process time with controls set to indicate a equal to a batch treated during one pressure cycle in a batch sys
deviation if pressure drops below a tem. Since pressure acts uniformly throughout the pressure ves
minimum value. sel, each package will be exposed to the same pressure and tem
perature deviation during the process, provided the walls of the
Process time at pressure Printed record of pressure against pressure vessel are kept at the final process temperature of the
time with controls set to indicate a process. Any process deviation will require the treatment of the
deviation if process hold time drops Jot as a whole by the appropriate corrective action.
below a set minimum value.
6. Research Needs
Process temperature Printed record of temperature with
controls set to indicate a deviation if

F URTHER RESEARCH JS PARTICULARLY NEEDED TO VALIDATE HPP
as a food preservation technology. Pressing needs include:
Conduct additional modeling research, using data generat
process temperature drops below a
set minimum. ed by multiple-cell pressure units that allow for similar come-up
times. Although HPP-derived semi-logarithmic survival curves
Decompression time Printed record of pressure with con appear nonlinear (for example, sigmoidal or biphasic), in HPP
trols set to indicate a deviation from a predictive microbiology, a logarithmic order of reduction is nor
time developed in the validation of mally assumed. This assumption carries the danger of underesti
the process. mating the subpopulation of pressure-resistant organisms.
Investigate the influence of pressure on reduction of micro
bial populations using the proper experimental design (statisti
5.1.2. Semi-continuous systems cally valid, collection of data at different pressures and control of
Semi-continuous systems are used to treat liquids and pastes temperature and product), so that kinetic parameters are quan
that can be pumped. The actual pressure treatment cycle is tified. In this way, critical process factors can be evaluated for
equal to a batch process. Thus, the critical process factors to be survival of pathogens or surrogates in a statistical manner and
controlled are those shown in 5.1.1. Process temperatures can be microbial inactivation could be predicted.
monitored in a continuous manner by placing a thermocouple in Evaluate synergistic effects among pressure, temperature
the inlet and outlet pipe. A diversionary valve can be included in and other variables.

Supplement-JOURNAL OF FOOD 8C1BHCB 61

~FS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Glossary Initial temperature (IT) and process temperature at all points in
A COMPLETE LIST OF DEFINITIONS REGARDING ALL THE TECH the process vessel must be monitored if it is an integral condition
flnologies is located at the end of this document. for microbial inactivation. (DC)
Adiabatic compression. Compression or decompression pro Pulsed HPP treatment. 'Ireatment of a food using more than
cesses occurring without heat transfer. one treatment cycle consisting of elements of compression time,
Batch treatment. 'Ireatment of a static mass of food in bullc or pressure hold time, decompression time, and specified pressure
packaged. hold time between cycles such that each cycle element is accu
Compression time. Recorded time to bring a mass of food rately and precisely reproduced until a specified number is
from 0.1 MPa to process pressure {s) achieved. Cycle elements may display a square, ramp, sinusoi
Continuous HPP treatment. 'Ireatment of liquiform products dal, or other wave form when recorded.
using a hold chamber designed to insure every food element re Semi-continuous HPP. 'Ireatment of liquiform products using
ceives a specified residence time at process pressure {and tem one or more chambers fitted with a free piston to allow compres
perature) with subsequent means for the product to do work sion, hold, and decompression with discharge under clean or
during decompression followed by aseptic or clean filling of sterile conditions.
packages. Surrogate microbe. A non-pathogenic species and strain re
Critical process factor. Any specified process condition and sponding to HPP treatment in a manner equivalent to a patho
specified limit (see process deviation) required to achieve a de genic species and strain. The surrogate allows biological verifica
sired/ specified residual level of activity of a specified pathogen. tion of an HPP treatment without introducing pathogens into a
Critical process factors can include, but not be limited to, process food processing area. For example, PA 3679 is used as a surrogate
pressure, product IT, process temperature, pH, 8w product com microbe for C. botulinum in thermal process validation. Listeria
position, compression time, and process pressure hold time. innocua is a possible surrogate for L. monocytogenes in HPP pro
Decompression time. Recorded time to bring a mass of food cess validation.
from process pressure to 37% of process pressure. If decompres z(T) value. The increase in number of degrees centigrade to
sion time is 0.5% or Jess of process pressure hold time, it may be reduce the D-value by a factor of 10. For example, when an in
neglected in process determination calculations. (s) crease of 7 DC centigrade in the process temperature changes the
High pressure processing (HPP). Adiabatic compression, D-value from 30 to 3 min, the Zi, value is 7 DC.
hold, and decompression of foods at pressures in the range of z(P) value. The increase in number of MPa to reduce the D
100 to 800 MPa for hold times of0.001 to 1200 s or longer. value by a factor of 10. For example, when an increase of 150 MPa
Intensifier. Device for delivering high pressure process liquid in the process pressure changes the D-value from 30 to 3 min,
generally by using a large-diameter, low-pressure piston to drive the~ value is 150 MPa. (MPa)
a small-diameter, high-pressure piston. The ratio of intensifica
tion is directly proportional to the ratio of the area of the large-di Prenure Unlta Convenlon l'aotora (To convert from the unlta ahown
ameter piston divided by the area of the small-diameter piston. aoron the lop of the table to the units ahown In the left aide column,
A 20:1 intensification ratio is common. The pressure in the low multiply bf the value h-n,)
pressure cylinder may be used to estimate the pressure of the Atlncllphena Bara1 Kg/cm2 Magapncala Poundallnch
high pressure process liquid. Intensifiers may be operated as (ATM) MPa (PSI)
single or multiple stroke devices. Single stroke intensifiers may A1M 1 0.987 0.968 9.901 0.068
be used to control the decompression rate of an HPP system. BARS 1.013 1.00 0.981 10.000 0.069
Kg/cm2 1.033 1.021 1 10.228 0.070
Process deviation. Any critical HPP process factor which lies MPa 0.101 0.1 0.098 1 0.00689
outside of specifieD-value and limit, lower limit, or range limit PSI 14.696 14.504 14.223 145.038 1
during the treatment and subsequent handling of an HPP-treat
ed food. Examples include pH, water activity, initial temperature
(IT), process temperature, process pressure, process pressure Suggestions for standardized microbial cultures to be
hold time, number of pulses, compression time (pulsed HPP used in UPP process development, challenge work,
treatment). and process validation
Process pressure (PP). Constant holding pressure for any (P) = Pathogens, (S) = Spoilage/Surrogate
HPP treatment. Process pressure should be controlled to + /
0.5% and recorded to the same level of accuracy. (+I - 500 psi at Listeria monocytogenes Scott A (NCTC 11994) (P) - Dairy, Meat,
100,000 psi) or (+ / - 3.4 MPa at 680 MPa). (MPa) (psi) (see pres Seafood, Vegetables
sure conversion factors at the end of the glossary). Clostridium botulinum 62A,l 7B or Beluga (P) - Meat, Seafood
Process pressure hold time. Recorded time from end of com Escherichia coli 0157:H7 * NCTC 12079 (Pl - Meat
pression to beginning of decompression (s). Staphylococcus aureus NCTC 10652 (enterotoxin A producer)
Product 8w- Value of water activity measured at product IT at (P) - Poultry Products

atmospheric pressure. (ftw units) Salmonella 'fyphimurium DT 104 (Pl - Poultry Products

Product composition. Specified percent by weight and range Salmonella Enteritidis (P)- Poultry products

limit of stated product ingredients(%). Bacillus cereus T (Pl - Poultry, Meat

Product Initial temperature (IT). Product IT can be specified Clostridium sporogenes PA 3679 (S) - Meat

as a critical process factor. IT must be not less than 0.5 DC below Lactobacillusfructivorans (S) - Fruit Products

specifieD-value in all food locations from start of compression Leuconostoc mesenteroides (S) - Vegetable Products

time to end of compression time (DC). Lactobacillus sake (S) - Acidified Products

Product pH. Value of pH measured at product initial tempera Zygosaccharomyces bailii (S) - Fruit Juices

ture at atmospheric pressure. Campylobacter sp. (P)

Product process temperature. Foods will increase in temper Clostridium fN!rfringens (P)

ature as a function of the imposed pressure and their composi Yersinia enterocolitica (P)

tion. Final product temperature at process pressure is indepen Vibro parahaemolyticus (P)

dent of compression rate as long as heat transfer is negligible. Listeria innocua (S)

62 JOURN1'L OP POOD SCIENCE-Supplement

High Pressure Processing ...
Since this list was prepared, two strains of E. coli O157:H7 of Gould, G. W. and Sale, A. J. H. 1970. Initiation of germination of bacterial spores by hydro
static pressure. J Gen Microbial. 60:335-346.
greater pressure resistance than NCTC 12079 have been identi Haas, G. J., Prescott, H. E., Dudley, E., Dik, R., Hintlan, C. and Keane, L. 1989. Inactivation of
fied. Strain C490 (Benito and others 1999) and strain 30-2C4 microorganisms by carbon dioxide under pressure. J Food Safety. 9:253-265.
Hara, A., Nagahama, G., Ohbayashi, A. and Hayashi, R. 1990. Effects of high pressure on
(clinical isolate from dry cured salami). inactivation of enzymes and microorganisms in nonpasteurized rice wine (Namazake).
Nippon Nogellcagaku Kalshi. 64(5): 1025-1030.
Hayakawa, I., Kanno, T., Tomita, M. and Fujio, Y. 1994a. Application of high pressure for
References spore inactivation and protein denaturation. J Food Sci. 59(1):159-163.
Adegoke, G. 0., Iwahashi, H. and Komatsu, Y. 1997. Inhibition ofSaccharomyces cerevisiae Hayakawa, I., Kanno, T., Yoshiyama, K. and Fujio, Y. 1994b. Oscillatory compared with con
by combination of hydrostatic pressure and monoterpenes. J Food Sci. 62(2): 404-405. tinuous high pressure sterilization on Bacillus stearotherrnophilus spores. J Food Sci.
Alderton, G. and Snell, N. 1969. Bacterial spores: Chemical sensitization to heat. Science. 59(1):164-167.
163:1212. Hayashi and Balny, C. High Pressure Science and Biotechnology. Hayashi and C. Balny. Am
Alderton, G., Ito, K. A. and Chen, J. K. 1976. Chemical manipulation of the heat resistance of sterdam. Elsevier Science, B.V. 171-174, 253-259.
Clostridium botulinum spores. Appl Environ Microbioi. 31:492-498. Hayashi, R. 1991. Pressure-processed food: Research and development. San-Ei Publishing.
Aleman, G. 0., Farkas, D. F.. McIntyre, S., Torres, J. A. and Wllheimsen, E. 1994. Ultra-high Kyoto, Japan.
pressure pasteurization of fresh cut pineapple. J Food Protect. 57(10):931-934. Heinz, V. and Knorr, D. 1998. High pressure germination and inactivation kinetics of bacterial
Aleman, G. 0., Ting, E. Y., Mordre, S. C., Hawes, A. C. 0., Walker, M., Farkas, D. F. and Torres, spores. N. S. lsaacs(ed.). High Pressure Food Science, Bioscience and Chemistry. Cam
J. A. I 996. Pulsed ultra high pressure treatments for pasteurization of pineapple juice. J bridge, UK. The Royal Society of Chemistry. 436-441.
Food Sci. 61 (2):388-390. Heinz, V. and Knorr, D. 1999. The effects of high pressure on microbial spores. European Con
Alpas, H.. Kalchayandand, N., Sikes, T., Dunne, C. P. and Ray, B. 1994. Hydrostatic pressure ference on Emerging Food Science and Technology. Tempere, Finland. November 22-24 1999.
among strains of foodborne pathogens. Applied and Environmental Microbiology. Heredia, N. L., Garcia, G. A., Luevanos, R., Labbe, R. G. and Garcia-Alvarado, J. S. 1997.
65(9):4248-4251. Elevation ofthe heat resistance of vegetative cells and spores of Clostrldium perfringens
Ananth, V., Dickson, J. S., Olson, D. G. and Murano, E. A. 1998. Shelf-life extension, safety and type A by sublethal heat shock. J Food Prat. 60(8) :998.
quality of fresh pork loin treated with high hydrostatic pressure. J Food Protect. Heremans, K. 1995. High pressure ~ffects on biomolecules. D. A. Ledward, D. E. Johnston, R.
61(12):16491656. G. Earnshaw and A. P. M. Hasting. High Pressure Processing of Foods. Leicestershire, UK.
Arroyo, G., Sanz, P. D. and Prestamo, G. 1997. Effect of high pressure on the reduction of Nottingham Universiry Press.
microbial populations in vegetables. J Appl Microbioi. 82:735 742. Hite, B. H. 1899. The effects of pressure in the preservation of milk. Morgantown. Bull WV
Ballestra, P., Da Sliva, A. A. and Cuq, J. L. 1996. Inactivation of Escherichia coli by carbon Univ Agric Exp Sta Morgantown. 58. 15-35.
dioxide under pressure. J Food Sci. 61 (4):829-836. Hite, B. H., Giddings, N. J. and Weakly, C. E. 1914. The effects of pressure on certain micro
Berllto, A., Ventoura, G., Casadei, M., Robinson, T. and Mackey, B. 1999. Variation in resis organisms encountered in the preservation of fruits and vegetables. Morgantown. Bull
tance ofnatural isolates ofEscherichia coli 0157 to high hydrostatic pressure, mild heat, WV Univ Agric Exp Sta Morgantown. 146. 1-67.
and other stresses. Appl Environ Microbial. 65(4):1564-1569. Hong, S. I., Park, W. S. and Pyun, Y. R. 1997. Inactivation of Lactobacillus sp. from kimchi by
Berlin, D. L., Herson, D.S., Hicks, D. T. and Hoover, D. G. 1999. Response of pathogenic Vibrio high pressure carbon dioxide. Lebensm Wiss Technol. 30:681-685.
species to high hydrostatic pressure. Appl Environ Microbioi. 65(6):2776-2780. Hoover, D. G., Metrick, C., Papineau, A. M., Farkas, D. F. and Knorr, D. 1989. Biological effects
Brauch, G., Haensler, U. and Ludwig, H. 1990. The effect of pressure on bacteriophages. High of high hydrostatic pressure on food microorganisms. Food Technol. 43(3):99-107.
Pressure Res. 5:767-769. Hoover, D. G. 1993. Pressure effects on biological systems. Food Technol. 47(6):150-155.
Bridgman, P. W. 1912. Watern in the liquid and five sloid forms under pressure. Proc Amer Horie, Y., Kimura, K., Ida, M., Yosida, Y. and Ohki, K. 1991. Jam preparation by pressurization.
Acad Art Sci. 47:441-558. Nippon Nogelkagaku Kalshi. 65(6):975-980.
Butz, P.. Trangott, V., Ludwig, H., Ries, J. and Weber, H. 1990. The high pressure inactivation lshiguro, Y.. Sato, T., Okamoto, T., Okamoto, K., Sakamoto, H., lnakuma, T. and Sonoda, Y.
of bacteria and bacterial spores. Die Pharrn Ind. 52:487-491. 1993. Effects of hydrostatic pressure and antimicrobial substances on the sterilization of
Butz, P., Hablson, G. and Ludwig, H. 1992. Influence ofhigh pressure on a lipid-coated virus. tomato juice. Nippon Nogeikagaku Kaishi. 67(12): 1707-1711.
R. Hayashi, K. Heremans and P. Masson(eds.). High Pressure and Biotechnology. London. lwahashi, H., Fujii, S.. Obuchi. K., Kaul, S. C., Sato, A. and Komatsu, Y. 1993. Hydrostatic
John Libby & Co., Ltd. 61-64. pressure is like high temperature and oxidative stress in the damage it causes to yeast.
Butz, P., Funtenberger, S., Haberditzl, T. and Tauscher, B. 1996. High pressure inactivation of FEMS Microbiology Letters. 108:53-58.
Byssochlamys nivea ascospores and other heat-resistant moulds. Lebensm Wiss Technoi. Jaenicke, R. 1981. Enzymes under extremes of physical conditions. Ann RevBiophys Bioeng.
29:404-410. 10:1-67.
Carlez, A., Cheftel, J.C., Rosec, J.P., Richard, N., Saldana, J. L. and Balny, C. 1992. Effects of Jay, J. J. 1996. Modern food microbiology. Chapman Hall. New York.
high pressure and bacteriostatic agents on the destruction of citrobacter freundii in Johnson, F. H. and Campbell, D. H. 1945. The retardation of protein denaturation by hydro
minced beef muscle. C. Balny, R. Hayashi, K. Heremans and P. Masson(eds.). High Pressure static pressure. Journal of Cell Comp Physiol. 26:43-46.
and Biotechnology. London, U.K. John Libby & Co., Ltd. 365-368. Johnson ,F. H., Eyring, H., and Jones-Stover, B. 1974. The theory of rate processes in biology
Carlez, A.. Rosec, J.P., Richard, N. and Cheftel, J.C. 1994. Bacterial growth during chilled and medicine. p. 82. Wiley, New York.
storage.of pressure-treated minced meat. Lebens Wiss Technoi. 27:48-54. Kakugawa, K., Okazaki, T., Yamauchi, S., Morimoto, K., Yoneda, T. and Suzuki, K. 1996. Ther
Carpi, G., Buzzoni, M.. Gola, S., Maggi, A. and Rovere, P. 1995. Microbial and chemical shelf mal inactivating behavior ofBacillus stearotherrnophilus under high pressure. R. Hayashi
life of high-pressure treated salmon cream at refrigeration temperatures. Industria Con and C. Balny. High Pressure Bioscience and Biotechnology. Amsterdam. Elsevier Science B.
serve. 70:386--397. V. I 7J.l 74.
Cheftei, J.C. 1992. Effects of high hydrostatic pressure on food constituents: An overview. Kalchayanand, N., Sikes, T.. Dunne, C. P. and Ray, B. 1994. Hydrostatic pressure and eiec
C. Balny, Hayashi, R., Heremans, K., Masson, P. High Pressure Biotechnol. 224. 195-209. troporation have increase bactericidal efficiency in combination with bacteriocins. Ap
Cheftel. J.C. 1995. Review: high pressure, microbial inactivation and food preservation. plied and Environmental Microbiology. 60:4174-4177.
Food Sci Technoi Int. 1(2/3):75-90. Kalchayanand, N.. Sikes, A.. Dunne, C. P. and Ray, B. 1998. Interaction of hydrostatic pressure,
Chen, C. and Tseng, C. W. 1997. Effect of high hydrostatic pressure on the temperature time and temperature of pressurization and pediocin AcH on inactivation of foodborne
dependence ofSaccharomyces cerevisiae and Zygosaccharomyces rouxii. Proc Biochem. bacteria. J Food Protect. 61(4):425-431.
32(4):337-343. Kinugasa, H., Takeo, T., Fukumoto, K. and Ishihara, M. 1992. Changes in tea components
Clouston, J. G. and Wllls, P.A. 1969. Initiation of germination and inactivation of Bacillus during processing and preservation of tea extract by hydrostatic pressure sterilization.
pumilus spores by hydrostatic pressure. J Bacterial. 97:684-690. Nippon Nogeikagaku Kaishi. 66(4):707-712.
Crawford, Y. J., Murano, E. A., Olson, D. G. and Shenoy, K. 1996. Use of high hydrostatic Laidler, K. J. 1951. The Influence of pressure on rates of biological reaction. Arch Biochem.
pressure and irradiation to eliminate Ciostridium sporogenes in chicken breast. J Food 30:226-240.
Protect. 59:711-715. Larkin, J. and Reddy, N. R. 1999. Personal communication.
Dring, G. J. 1976. Some aspects of the effects of hydrostatic pressure on microorganisms. S. Larsen, W. P., Hartzell, T. B. and Diehl, H. S. 1918. The effects of high pressure on bacteria. J
A. Skinner and V. Hugo(eds.). Inhibition and inactivation of vegetative microbes. New Inf Diseases. 22:271-279.
York. Academic Press Inc. Ledward, D. A., Johnston, D. E., Earnshaw, R. G. and Hasting, A. P. M. 1995. High Pressure
El Moueffak, A. C., Antoine, M., Cruz, C., Demazeau, G., Largeteau, A., Montury, M., Roy, B. Processing ofFoods. Nottingham University Press. Leiscestershire, UK.
and Zuber, F. 1995. High pressure and pasteurization effect on duck foie gras. Int J Food Leistner, L. and Garris, L. G. M. 1995. Food preservation by hurdle technology. Trends in
Sci Technoi. 30(6):737-743. Food Science & Technology. 6(2):41-46.
Enomoto, A., Nakamura, K., Hakoda, M. and Amaya, N. 1997. Lethal effect ofhigh-pressure Linton, M., McClements, J.M. J. and Patterson, M. F. 1999. lnactivation of Escherichia coli
catbon dioxide on a bacterial spore. J Ferment Bioeng. 83(3):305-307. 0157:H7 In orange juice using a combination of high pressure and mild heat. J Food
Estiaghi, M. N., Stute, R. and Knorr, D. 1994. High pressure and freezing pretreatment effects Protect. 62(3):277-279.
on drying, rehydration, texture and color of green beans, carrots and potatoes. J Food Sci. Lildemann, H.-0. 1992. Water and aqueous solutions under high pressure. C. Balny, R.
59:1168-1170. Hayashi, K. Heremans and P. Masson. High Pressure and Biotechnology. London. Col
Fujii, T., Satomi, M., Nakatsuka, G., Yamaguchi, T. and Okuzumi, M. 1994. Changes in fresh logue INSERM/John Libby Eurotext Ltd. 224. 25-32.
ness indexes and bacterial flora during storage of pressurized mackerel. Shokuhin Eiseigaku Ludwig, H .. Bieler, D., Hallbauer, K. and Scigalla, W. 1992. Inactivation of microorganisms by
Zasshi (I Food HygSoc Japan). 35(2):195-200. hydrostatic pressure. C. Balny, R. Hayashi, K. Heremans and P. Masson. High Pressure and
Fujii, T., Salomi, M., Nakatsuka, G. and Yamaguchi, T. 1995. Effect of media on the detection Biotechnology. London. Coiloque INSERM/John Libby Eurotext Ltd. 224. 25-32.
rate of pressure-injured bacteria. Shokuhin Eiseigaku Zasshi (I Food Hyg Soc Japan). Ludwig, H .. Van Almsick, G. and Sojka, B. 1996. High pressure inactivation of microorgan
36(1):17-21. isms. R. Hayashi and C. Balny. High pressure Bioscience and Biotechnology. Amsterdam.
Garcla-Graells, V., Hauben, E. J. A. and Michieis, C. W. 1998. High-pressure inactivation and Elsevier Science B. V. 237.
sublethal injury ofpressure-resistant Escherichia coll mutants in fruit juices. Appl Environ Mackey, B. M., Forestiere, K. and Isaacs, N. 1995. Factors affecting the resistance of Listeria
Mlcrobioi. 64:1566-1568. monocytogenes to high hydrostatic pressure. Food Biotechnol. 9:1-11.
Gervilla, R., Capellas, M., Ferragut, V. and Guamis, B. 1997a. Effect of high hydrostatic pres Marquis, R. E. and Bender, G. R. 1987. Barophysiologyofprokaryotes and proton-transio
sure on Listeria innocua 910 CECT inoculated into ewes' milk. J Food Protect. 60(1):33-37. cating ATPases. H. W. Jannisch, R. E. Marquis and A. M. Zimmermann. Current Perspec
Gervilla, R., Felipe, X., Ferragut, V. and Guamis, B. I 997b. Effect of high hydrostatic pressure tives in High Pressure Biology. London. Academic Press, Ltd. 65-73.
on Escherichia coli and Pseudomonas Ouorescens strains in bovine milk. J Dairy Sci. Masuda, M., Saito, Y., Iwanami, T. and Hirai, Y. 1992. Effects of hydrostatic pressure on
00-.2297-2303. packaging materials for food. High Pressure and Biotechnology. London. Collogue JN
Glddlnga, N. J., Allard, H. A. and Hite, B. H. 1929. Inactivation of the tobacco mosaic virus by SERM/John Libby Eurotext Ltd. 224. 545-547.
high pressure. Phytopatology. 19:749-750. Metrick, C., Hoover, D. G. and Farkas, D. F. 1989. Effects of high hydrostatic pressure on
Gola, S., Farnan, C., Carpi, G., Maggi, A., Cassara, A. and Rovere, P. 1996. Inactivation of heat- resistant and heat-sensitive strains of Salmonella. J Food Sci. 54: 1547 -1564.
bacterial spores In phosphate buffer and in vegetable cream treated at high pressures. R. Meyer, P. 2000. Ultra high pressure, high temperature, food preservation process. US 6,017,572.
Hayashi and C. Balny(eds.). High Pressure Bioscience and Biotechnology. Amsterdam. 253 Miyakawa, H., Anjitsu, K., Ishibashi, N. and Shimanura, S. 1994. Effects of pressure on enzyme
259. Elsevier Science B. V. activities ofLactobacillus heiveticus LHE-511. Biosci Biotechnoi Biochem. 58(3):606-607.

Supplement-JOURN1'L. OF FOOD SCIENCE 63

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Miyao, S., Shindoh, T., Miyamorl, K. and Arita, T. 1993. Effects of high pressurization on the la stabilita microbiologlca ed enzimatica. lndustrie Allmentari. XXXV: 1062-1065.
growth of bacteria derived from surimi (fish paste). Nippon Shokuhln Kogyo Gakkaishl Rovere, P., Catpi, G., Dall'Aglio, G., Gola, S., Maggi, A., Mlgiloli, L. and Scaramuzza, N. 1996b.
(Journal of the Japanese Society for Food Science and Technology). 40(7):478-484. High-pressure heat treatments: Evaluation of the sterilizing effect and of thermal dam
Moorman, J.E., Toledo, R. T. and Schmidt, K. 1996. High-pressure throttling (HPT) reduces age.lndustriaConserve. 71:473-483.
microbial population, improves yogun consistency and modifies rheological propenies Russell, N. J.. Evans, R. l., ter Steeg, P. F., Hellemons, J., Verheul, A. and Abee, T. 1995. Mem
of ultraflltered milk. JFT Annual Meeting: Book of Abstracts. 49. branes as a tatget for stress adaptation. Int J Food Microbial. 28:255-261.
Mussa, D. M., Ramaswamy, H. S. and Smith, J.P. 1999. High-pressure destruction kinetics of Sale, A. J. H., Gould, G. W. and Hamilton, W. A. 1970. Inactivation of bacterial spores by
listeria monocytogenes on pork. J Food Protect. 62(1):40-45. hydrostatic pressure. J Gen Microbial. 60:323-334.
Nakayama, A., Yano, Y., Kobayashi, S., Ishikawa, M. and Sakai, K. 1996. Compatison of pres Salomi, M., Yamaguchi, T., Okuzuml, M. and Fujll, T. 1995a. Effect of conditions on the
sure resistances of spores of six Bacillus strains with their heat resistances. Appl Environ barotolerance of Escherichia coll. Shokuhln Eiselgaku Zasshi (I of Food Hyg Soc Japan).
Microbial. 62(10):3897-3900. 36(1):29-34.
Ng, H., Bayne, G. G. and Gatibaldi, J.A. 1969. Heatresistance of Salmonella, the uniqueness Satoml, M., Yamaguchi, T., Okuzumi, M. and Fujii, T. 1995b. Effect of several conditions on
of Salmonella senftenberg 775W. Appl Microbial. 17:78-82. the recovery of pressure-injured bacteria. Shokuhin Elseigaku Zasshl (J of Food Hyg Soc
Nishi, K., Kato, R. and Tomita, M. 1994. Activation of Bacillus spp. spores by hydrostatic Japan). 36(3):344-351.
pressure. Nippon Shokuhin Kogyo Gakkalshl (Journal of the Japanese Society for Food Seyderhelm, I. and Knorr, D. 1992. Reduction of Bacillus steatothermophilus spores by
Science and Technology). 41 (8):542-548. combined high pressure and temperature treatments. ZFL Eur Food Sci. 43: 17.
Ohnishi. 1993. Pressurization ofTrichlnella splralls. Japanese-only book ofJapanese pres Shlgehisa, T., Ohmori, T.. Saito, A., Taji, S. and Hayashi, R. 1991. Effects of high hydrostatic
sure consonlum proceedings. Chapter 17. pressure on chatacteristics of pork slurries and inactivation of microorganisms associated
Okazaki, T.. Yoneda, T. and Suzuki, K. 1994. Combined effects of temperature and pressure with meat and meat products. Int J Microblol. 12:207-216.
on sterilization ofBaclllus subtllls spores. Nippon Shokuhln Kogyo Gakkaishi (Journal of Shlgehisa, T., Nakagami, H., Ohno, H., Okate, T., Mori, H., Kawabata, T., Morimoto, M. and
the Japanese Society for Food Science and Technology). 41(8):536. Ueba, N. 1996. Inactivation of HIV in bloodplasma by high hydrostatic pressure. R. Hayashi
Okazaki, T., Kakugawa, K., Yamauchi, S., Yoneda, T. and Suzuki, K. 1996. Combined effects and C. Baloy. High pressure bioscience and biotechnology. Elsevier Science B. V. 273-278.
of temperature and pressure on Inactivation of heat-resistant bacteria. R. Hayashi and Simpson, R. K. and Gllmour, A. 1997a. The effect of high hydrostatic pressure on Listeria
C. Baloy. High Pressure Bioscience and Biotechnology. Amsterdam. Elsevier Science B. monocytogenes in phosphate-buffered saline and model food systems. J Appl Microbial.
V. 415-418. 83:181-188.
Otake, T., Mori, H., Kawabata, T., lzumoto, Y., Nishimura, H., Olshl, I., Shlgehisa, T. and Ohno, Simpson, R. K. and Gilmour, A. 1997b. The effect of high hydrostatic pressure on the activity
H. 1997. Effects of high hydrostatic pressure treatment of HIV infectlvity. K. Heremans. of intracellulat enzymes of Listeria monocytogenes. Let Appl Microbial. 25:48-53.
High Pressure Reseateh in the Biosciences and Biotechnology. Leuven. Leuven University Smelt, J.P. P. M., Rijke,A. G. F. and Hayhurst, A. 1994. Possible mechanism of high pressure
Press. 223 236. Inactivation ofmicroorganisms. High Press Res. 12:199-203.
Oxen, P. and Knorr, D. 1993. Baroprotectlve effects of high solute concentrations against Smelt, J.P. P. 1998. Recent advances in the microbiology of high pressure processing. Trends
Inactivation of Rhodotorula rubra. Lebensmittel-Wissenschaft und Technologie. 26:220 Food Sci Technol. 9:152-158.
223. Smelt, J.P. P. M. and Hellemons, J.C. 1998. High pressure treatment in relation to quantitative
Pagan, R., Jordan, S., Benito, A. and Mackey, B. 1999. Enhanced acid sensitivity ofpressure risk assessment. VTT Symposium. Espoo: Technical Reseatch Centre of Finland. 27-38.
damaged escherlchla coll. European Conference on Emerging Food Science and Tech Sonolke, K.. Setoyama, K. and Kobayashi, S. 1992. Effect of pressure and temperature on the
nology, European Federation of Food Science and technology. Tempere, Finland. No death rates of lactobaclllus casei and escherlchla coli. C. Baloy, R. Hayashi, K. Heremans
vember 22-24, 1999. and P. Masson. High Pressure and Biotechnology. 224:297 -30 I.
Pagan, R. and Mackey, B. 1999. Membrane damage in pressure-treated cells of escherichla Standsted. 2000. Personal communication. Standsted Fluid Power, Ltd. Standsted, Essex
coli. European Conference on Emerging Food Science and Technology, European Fed CM24 8HT, UK.
eration of Food Science and Technology. Tempere, Finland. November 22-24, 1999. Stewan, C. M.. Jewett Jr., F. F., Dunne, C. P. and Hoover, D. G. 1997. Effect of concurrent high
Palou, E., Lopez-Malo, A.. Batbosa-Canovas, G. V., Weltl-Chanes, J. and Swanson, B. G. 1998. hydrostatic pressure, acidity and heat on the injury and destruction of Listeria monocy
Oscillatory high hydrostatic pressure inactivation of Zygosaccharomyces ballli. J Food togenes. J Food Safety. 17:23-36.
Protect. 61(9):1213-1215. Styles, M. F., Hoover, D. G. and Farkas, D. F. 1991. Response of Listeria monocytogenes and
Papineau, A. M., Hoover, D. G., Knorr, D. and Fatkas, D. F. 1991. Antimicrobial effect of Vibrio parahaemolytlcus to high hydrostatic pressure. J Food Sci. 56(5):1404-1407.
water-soluble chitosans with high hydrostatic pressure. Food Blotechnol. 5:45-47. Suzuki, C. and Suzuki, K. 1962. The protein denaturation by high pressure. J Blochem. 52:67 71.
Parish, M. E. 1998. High pressure Inactivation of Saccharomyces cerevlslae, endogenous Suzuki, K. and Taniguchi, T. 1972. Effect of pressure on biopolymers and model systems. M.
mlcroflora and pectinmethylesterase In orange juice. J Food Protect. 18(1):57-65. A. Sleigh and A. G. Macdonald. The Effect of Pressure on Living Organisms. New York.
Patterson, M. F., Quinn, M., Simpson, R. and Gilmour, A. 1995. Sensitivity of vegetative Academic Press Inc. 103.
pathogens to high hydrostatic pressure treatment ln phosphate buffered saline and foods. Tanaka, T. and Hatanaka, K. 1992. Application of hydrostatic pressure to yoghun to prevent
J Food Protect. 58(5):524-529. its after-acidification. Nippon Shokuhln Kogyo Gakkaishi (I Japanese Society for Food
Patterson, M. F. and Kilpatrick, D. J. 1998. The combined effect of high hydrostatic pres Science and Technology). 39(2): 173-177.
sure and mild heat on Inactivation of pathogens in milk and poultry. J Food Protect. Tauscher, B. K. 1998. Effect of high pressure treatment to nutritive substances and natural
61 (4):432-436. pigments. Fresh Novel Foods by High Pressure. VTT Symposium 186. Technical Research
Paul, P. L. and Morita, R. Y. 1971. Effects of hydrostatic pressure and temperature on the Centre of Finland. Helsinki, Finland.
uptake and respiration of amino acids by a faculttlvely psychrophtlic marine bacterium. Tauscher, B. 1999. High pressure and chemical reactions: effects on nutrients and pigments.
J Bacterial. 108:835-843. Emerging Food Science and Technology. Tempere, Finland. November 22-24, 1999. 58.
Paul, P., Chawala, S. P., Thomas, P. and Kesavan, P. C. 1997. Effect ofhlgh hydrostatic pressure, Timson, W. J. and Shon, A. J. 1965. Resistance of microorganisms to hydrostatic pressure.
gamma-Irradiation and combined treatments on the microbiological quality of lamb Blotechnol and Bloeng. Vll:139-159.
meat during chilled storage. J Food Safety. 16(4):263-271. Ting, E. 1999. Personal Communication. Flow International, Kent, WA.
Perrier-Cornet, J.M.. Marechal, P.A. and Gervais, P. 1995. A new design intended to relate Wei, C. I., Balaban, M. 0., Fernando, S. Y. and Peplow, A. J. 1991. Bacterial effect of high
high pressure treatment to yeast cell mass transfer. J Blotechnol. 41:49-58. pressure CO 2 treatment of foods spiked with Listeria or Salmonella. J Food Protect.
Pierson. M. D. and Corlett, D. A. J. 1992. HACCP principles and applications. Van Nostrand 54(3):189-193.
Reinhold Publishing. New York. Weiss, K. F. and Strong, D. H. 1967. Some properties of heat-resistant and heat-sensitive
Ponce, E., Pia, R., Mor-Mur, M., Gervilla, R. and Guamls, B. 1998. lnactlvatlon of Listeria strains ofclostrldlum perftlngens. l. Heat resistance and toxlgenlcity. J Bacterial. 93:21-26.
innocua inoculated in liquid whole egg by high hydrostatic pressure. J Food Protect. Wilson, D. C. 1974. High pressure sterilization. 34thAnnual Meeting of the Institute of Food
61(!):119-122. Technologists. New Orleans, LA. May 12-15.
Popper, L and Knorr, D. 1990. Applications of high-pressure homogenization for food Wouters, P. C., Glaasker, E. and Smelt, J.P. P. M. 1998. Effects of high pressure on Inactivation
preservation. Food Technol. 44:84-89. kinetics and events related to proton efflux in Lactobacillus plantarum. Appl Environ
Raso, J., Pagan, R., Condon, S. and Sala, F. J. 1998a. Influence of temperature and pressure Microbial. 64(2):509-514.
on the lethality of ultrasound. Appl Environ Microbial. 64(2):46547!. Wuytack. E. Y., Boven, S. and Michiels, C. W. 1998. Compatative study of pressure-induced
Raso, J., Palop, A., Pagan, R. and Condon, S. 1998b. Inactivation ofBaclllus subtllis spores by germination of Bacillus subtilis spores at low and high pressure. A Environ Microbial.
combining ultrasonic waves under pressure and mild heat treatment. J Applied Mlcroblol. 64:3220-3224.
85:849-854. Yano, Y.. Nakayama, A., Kishihata, S. and Saito, H. 1998. Adaptive changes in membrane lipids
Raso, J., Batbosa-Canovas, G. V. and Swanson, B. G. 1998c. Initiation of germination and ofbatophilic bacteria In response to changes in growth pressure. Appl Environ Microbiol.
inactivation by high hydrostatic pressure of Bacillus cereus sporulated at different tem 64:479-485.
peratures. IFT Annual Meeting: Book of Abstracts. Atlanta, GA. 154. ZoBeil, C. E. 1970. Pressure effects on morphology and life process of bacteria. A. M.
Raso, J., Gongora, M., Barbosa-Canovas, G. V. and Swanson, B. G. 1998d. Effect of pH and Zimmermann. High pressure effects on cellular processes. New York. Academic Press
water activity on the initiation of germination and Inactivation ofBacillus cereus by high Inc. 85-130.
hydrostatic pressure. IFT Annual Meeting: Book of Abstracts. Atlanta, GA. 153. Zook, C. D., Parish, M. E.. Braddock, R. J. and Balaban, M. 0. 1999. High pressure inactivation
Robens, C. M. and Hoover, D. G. 1996. Sensitivity ofBaclllus coagulans spores to combina kinetics of Saccharomyces cerevisiae ascospores in orange and apple juice. J Food Sci.
tions of high hydrostatic pressure, heat acidity, and nlsin. J Applied Bacterial. 81:363-368. 64(3):533-535.
Rovere, P., Tosorattl, D. and Maggi, A. 1996a. Prove di sterilizzazione a 15.000 bat per ottenere

64 JOURNAL. Of' FOOD 9C1BNCB-Supplement

-lFS SUPPLEMENT: Kinetic& of Microbial Inactivation for Alternative Food Proceeelng Technologies

Pulsed Electric Fields

GUSTAVO V. BARBOSA-CANOVAS, MERLE D. PIERSON, Q, HOWARD ZHANG, AND DONALD W. SCHAFFNER

Scope of Deliverables: This section discusses current knowledge in the application of pulsed electric fields as a
method of non-thermal food preservation. It includes mechanisms of inactivation, studies on microbial inactiva
tion, critical process factors, and future research needs. Detailed descriptions of pilot and laboratory-scale equip
ml'nt and their use in food preservation are also covered.

1. Introduction with a high frequency pulser (for example, 1000 Hz), the dielec
tric relaxation time at zero voltage between 4 .s square wave
1.1. Definition, Description and Applications pulses is 0.996 .s (Quass 1997). Instant-charge-reversal pulses
1.1.1 Definition can drastically reduce energy requirements to as low as 1.3 J/ml
High intensity pulsed electric field (PEF) processing involves (EPRI 1998).
the application of pulses of high voltage (typically 20 - 80 kV/cm) Oscillatory decay pulses are the least efficient, because they
to foods placed between 2 electrodes. PEF treatment is conduct prevent the cell from being continuously exposed to a high in
ed at ambient, sub-ambient, or slightly above ambient tempera tensity electric field for an extended period of time, thus pre
ture for less than 1 s, and energy loss due to heating of foods is venting the cell membrane from irreversible breakdown over a
minimized. For food quality attributes, PEF technology is consid large area (Jeyamkondan and others 1999).
ered superior to traditional heat treatment of foods because it
avoids or greatly reduces the detrimental changes of the sensory 1.1.3. Treatment chambers and equipment
and physical properties of foods (Quass 1997). Although some Currently, there are only 2 commercial systems available (one
studies have concluded that PEF preserves the nutritional com by PurePulse Technologies, Inc. and one byThomson-CSF). Dif
ponents of the food, effects of PEF on the chemical and nutri ferent laboratory- and pilot-scale treatment chambers have
tional aspects of foods must be better understood before it is been designed and used for PEF treatment of foods. They are
used in food processing (Qin and others 1995b). classified as static (U-shaped polystyrene and glass coil static
Some important aspects in pulsed electric field technology chambers) or continuous (chambers with ion conductive mem
are the generation of high electric field intensities, the design of brane, chambers with baffles, enhanced electric field treatment
chambers that impart uniform treatment to foods with minimum chambers, and coaxial chambers). These chambers are de
increase in temperature, and the design of electrodes that mini scribed in Appendix 1. A continuous flow diagram for PEF pro
mize the effect of electrolysis. The large field intensities are cessing of foods is illustrated in Fig. 4. The test apparatus con
achieved through storing a large amount of energy in a capacitor sists of 5 major components: a high-voltage power supply, an en
bank (a series of capacitors) from a DC power supply, which is ergy storage capacitor, a treatment chamber(s), a pump to con
then discharged in the form of high voltage pulses (Zhang and
others 1995). Studies on energy requirements have concluded
that PEF is an energy-efficient process compared to thermal pas CharJing Resistor Discharge Switch
teurization, particularly when a continuous system is used (Qin ..L.
and others 1995a).
Rs
1.1.2. Description of pulsed waveforms Ener&Y Storage
cap.citor
PEF may be applied in the form of exponentially decaying,
Co
square wave, bipolar, or oscillatory pulses. An exponential decay
voltage wave is a unidirectional voltage that rises rapidly to a
maximum value and decays slowly to zero. The circuit in Fig. 1
may be used to generate an exponential decay waveform. A DC
power supply charges a capacitor bank connected in series with a
50
charging resistor (ffs). When a trigger signal is applied, the charge
stored in the capacitor flows though the food in the treatment 40
chamber.
Square pulse waveforms are more lethal and more energy ef l 30
ficient than exponential decaying pulses. A square waveform can
be obtained by using a pulse-forming network (PFN) consisting
of an array of capacitors and inductors and solid state switching
I> 10
20

devices (Fig. 2).

The instant-charge-reversal pulses are characterized by a +ve
part and -ve part (Fig. 3) with various widths and peak field 0 20 40 eo IO
-10
strengths. An instant-charge-reversal pulse width with charge
reversal at the end of the pulse is considerably different from a
standard bipolar pulse. In the latter, the polarity of the pulses is Pig, 1 -Electrical circuit for tho production of oJqHNtentlal d-,,
reversed alternately with relaxation time between pulses. Even __,_
Supplement-JOURM~L. OP fl'OOD 9Cl8MCB 65
J.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
duct food though the treatment chamber(s). a cooling device, suits confirmed that the square wave is the most effective pulse
voltage, current, temperature measurement devices, and a com shape. In addition, the authors reported that total aerobic counts
puter to control operations. were reduced by 3- to 4-log cycles under 32 kV/ cm. When stored
at 4 C, both heat- and PEP-treated juices had a shelf-life of more
1.2. Applications of PEF Technology in Food than 5 mo. Vitamin C losses were lower and color was generally
Preservation better preserved in PEP-treated juices compared to the heat
To date, PEF has been mainly applied to preserve the quality treated ones up to 90 d (storage temperature of 4 c or 22 C) or
of foods, such as to improve the shelf-life of bread, milk, orange 15 d (storage temperature of 37 C) after processing.
juice, liquid eggs, and apple juice, and the fermentation proper
ties of brewer's yeast. 1.2.3. Processing of milk
Dunn and Pearlman (1987) conducted a challenge test and
1.2.1. Processing of apple juice shelf-life study with homogenized milk inoculated with Salmo
Simpson and others (1995) reported that apple juice from nella Dublin and treated with 36.7 kV/cm and 40 pulses over a
concentrate treated with PEF at 50 kV/cm, IO pulses, pulse width 25-min time period. Salmonella Dublin was not detected after
of 2 s and maximum processing temperature of 45 C had a PEF treatment or after storage at 7-9 c for 8 d. The naturally oc
shelf-life of 28 d compared to a shelf-life of 21 d of fresh curring milk bacterial population increased to I07 cfu/ml in the
squeezed apple juice. There were no physical or chemical chang untreated milk, whereas the treated milk showed approximately
es in ascorbic acid or sugars in the PEP-treated apple juice and a 4X 102 cfu/ml. Further studies by Dunn (1996) indicated less fla
sensory panel found no significant differences between untreat vor degradation and no chemical or physical changes in milk
ed and electric field treated juices. Vega Mercado and others quality attributes for cheesemaking. When Escherichia coli was
(1997) reported that PEF extended the shelf-life at 22-25 C of used as the challenge bacteria, a 3-log reduction was achieved
fresh apple juice and apple juice from concentrate to more than immediately after the treatment.
56 d or 32 d, respectively. There was no apparent change in its Fernandez-Molina and others (1999) studied the shelf-life of
physicochemical and sensory properties. raw skim milk (0.2% milk fat), treated with PEF at 40 kV/cm, 30
pulses, and treatment time of 2 s using exponential decaying
1.2.2. Processing of orange juice pulses. The shelf-life of the milk was 2 wk stored at 4 C; however,
Sitzmann (1995) reported on the effectiveness of the ELSTER treatment of raw skim milk with 80 c for 6 s followed by PEF
IL continuous process developed by the food engineers at Krupp treatment at 30 kV/cm, 30 pulses, and pulse width of 2 sin
Maachinentechnik GmbH in Hamburg, in association with the creased the shelf-life up to 22 d, with a total aerobic plate count
University of Hamburg, Germany. They reported the reduction of 3.6-log cfu/ml and no coliform. The processing temperature
of the native microbial flora of freshly squeezed orange juice by did not exceed 28 C during PEF treatment of the raw skim milk.
3-log cycles with an applied electric field of 15 kV I cm without sig Qin and others (1995b) reported that milk (2% milk fat) sub
nificantly affecting its quality. jected to 2 steps of 7 pulses each and 1 step of 6 pulses with an
Zhang and others (1997) evaluated the shelf-life ofreconsti electric field of 40 kV/cm achieved a shelf-life of 2 wk at refrigera
tuted orange juice treated with an integrated PEF pilot plant sys tion temperature. There was no apparent change in its physical
tem. The PEF system consisted of a series of co-field chambers. and chemical properties and no significant differences in senso
Temperatures were maintained near ambient with cooling devic ry attributes between heat pasteurized and PEF treated milk
es between chambers. Three waveshape pulses were used to Calderon-Miranda (1998) studied the PEF inactivation of List
compare the effectiveness of the processing conditions. Their re eria innocua suspended in skim milk and its subsequent sensiti
zation to nisin. The microbial population of L. innocua was re
duced by 2.5-log after PEF treatments at 30, 40 or 50 kV/cm. The
same PEF intensities and subsequent exposure to 10 IU nisin/ml

a
.,........... achieved 2-, 2.7- or 3.4-log reduction cycles of L. innocua. It ap
pears that there may be an additional inactivation effect as a re
..L

=f+n=~=

e
a d

b
. - ~
I
pulse

1
i
0
b --
C

1: f
0

-to"ID
0

\
. Time
Fig. 3-A voltage (V) trace of an Instant-charge-reversal pulse where
Fig. 2-Square pulse generator using a pulse-forming network of 3 a Is pulse period Isl, b Is pulse width lsl, c Is a pulse rise tlmelsl to
capacitors inductor units and a voltage trace across the treatment reach e lkV), d Is a spike widthls), e Is a peak voltage lkV), and f Is a
chamber spike voltage lkV) IHo and others 19951

66 JOURNAL. OF FOOD SCIENCE-Supplement

Pulsed lectrlc Fields . . .
suit of exposure to nisin after PER Reina and others (1998) stud ture beyond 55 C during treatment. The shelf-life of the PEF
ied the inactivation of Listeria monocytogenes Scott A in pasteur treated pea soup stored at refrigeration temperature exceeded 4
ized whole, 2%, and skim milk with PER Listeria monocytogenes wk, while 22 or 32 C were found inappropriate to store the prod
was reduced 1- to 3-log cycles at 25 C and 4-log cycles at 50 C, uct. There were no apparent changes in the physical and chemi
with no significant differences being found among the 3 milks. cal properties or sensory attributes of the pea soup directly after
The lethal effect of PEP was a function of the field intensity and PEF processing or during the 4 wk of storage at refrigeration tem
treatment time. peratures.

1.2.4. Processing of eggs 1.3. Current Limitations

Some of the earliest studies in egg products were conducted Some of the most important current technical drawbacks or
by Dunn and Pearlman (1987) in a static parallel electrode treat limitations of the PEF technology are:
ment chamber with 2-cm gap using 25 exponentially decaying a) The availability of commercial units, which is limited to one
pulses with peak voltages of around 36 kV. Tests were carried out by PurePulse Technologies, lnc., and one by Thomson-CSR
on liquid eggs, on heat-pasteurized liquid egg products, and on Many pulse-power suppliers are capable of designing and con
egg products with potassium sorbate and citric acid added as structing reliable pulsers, but except for these 2 mentioned, the
preservatives. Comparisons were made with regular heat-pas complete PEF systems must be assembled independently. The
teurized egg products with and without the addition of food pre systems (including treatment chambers and power supply
servatives when the eggs were stored at low (4 C) and high (10 equipments) need to be scaled up to commercial systems.
C) refrigeration temperatures. The study showed the impor b) The presence of bubbles, which may lead to non-uniform
tance of the hurdle approach in shelf-life extension. Its effective
treatment as well as operational and safety problems. When the
ness was even more evident during storage at low temperatures, applied electric field exceeds the dielectric strength of the gas
where egg products with a final count around 2.7 log cfu/ml bubbles, partial discharges take place inside the bubbles that
stored at 10 C and 4 C maintained a low count for 4 and 10 d, re
can volatize the liquid and therefore increase the volume of the
spectively, versus a few hours for the heat pasteurized samples. bubbles. The bubbles may become big enough to bridge the gap
Other studies on liquid whole eggs (LWEJ treated with PEP between the 2 electrodes and may produce a spark. Therefore,
conducted by Qin and others (1995) and Ma and others ( 1997) air bubbles in the food must be removed, particularly with batch
showed that PEP treatment decreased the viscosity but in systems. Vacuum degassing or pressurizing the treatment media
during processing, using positive back pressure, can minimize
creased the color (in terms of f3-carotene concentration) of liquid
whole eggs compared to fresh eggs. After sensory panel evalua the presence of gas. In general, however, the PEF method is not
tion with a triangle test, Qin and others (1995b) found no differsuitable for most of the solid food products containing air bub
ences between scrambled eggs prepared from fresh eggs and bles when placed in the treatment chamber.
electric field-treated eggs; the latter were preferred over a com c) Limited application, which is restricted to food products
mercial brand. that can withstand high electric fields. The dielectric property of
In addition to color analysis of eggs products, Ma and others a food is closely related to its physical structure and chemical
(1997) evaluated the density of fresh and PEP-treated LWE (indi composition. Homogeneous liquids with low electrical conductiv
cator of egg protein-foaming ability). as well as the strength of ity provide ideal conditions for continuous treatment with the
sponge cake baked with PEP-treated eggs. The stepwise process PEF method. Food products without the addition of salt have
used by Ma and others (1997) did not cause any difference in conductivity in the range ofO.l to 0.5 S/m. Products with high
density or whiteness between the PEP-treated and fresh LWE. electrical conductivity reduce the resistance of the chamber and
The strength of the sponge cakes prepared with PEP-treated consequently require more energy to achieve a specific electrical
eggs was greater than the cake made with non-processed eggs. field. Therefore, when processing high salt products, the salt
This difference in strength was attributed to the lower volume should be added after processing.
obtained after baking with PEP-treated eggs. The statistical anal d) The particle size of the liquid food in both static and flow
ysis of the sensory evaluation revealed no differences between treatment modes. The maximum particle size in the liquid must
cakes prepared from PEF processed and fresh LWE. be smaller than the gap of the treatment region in the chamber
in order to maintain a proper processing operation.
1.2.5. Processing of green pea soup e) The lack of methods to accurately measure treatment deliv
Vega-Mercado and others (1996a) exposed pea soup to 2 ery. The number and diversity in equipment, limits the validity
steps of 16 pulses at 35 kV/cm to prevent an increase in tempera- of conclusions that can be drawn about the effectiveness of par
ticular process conditions. A method to measure treatment deliv
ery would prevent inconsistent results due to variations in PEF
systems. Such a method is not available yet.

1.4. Summary of Mechanisms of Microbial

Inactivation
The application of electrical fields to biological cells in a medi
um (for example, water) causes buildup of electrical charges at
the cell membrane (Schoenbach and others 1997). Membrane
disruption occurs when the induced membrane potential ex
ceeds a critical value of 1 V in many cellular systems, which, for
example, corresponds to an external electric field of about 10 kV/
cm for E.coli (Castro and others 1993). Several theories have
been proposed to explain microbial inactivation by PER Among
them, the most studied are electrical breakdown and electropo
ration or disruption of cell membranes (Zimermmann and Benz
Pit, ,-Contlnuou NP flow diagram

Supplement-JOURNAL OF FOOD SCIENCE 67

J.PS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food .Processing Technologies

1980; Zimermmann 1986; Castro and others 1993; Sale and others (1999) reported that for an electric field strength 1.5 times
Hamilton 1967;Vega-Mercado and others 1996a; 1996b). These higher than Ee, the critical treatment time would remain con
theories will be explained in greater detail in Section 3. stant.
c) Pulse waveshape. Electric field pulses may be applied in
1.5. Summary of Microbial Inactivation Kinetics the form of exponential decaying, square-wave, oscillatory, bipo
The development of mathematical models to express the in lar, or instant reverse charges. Oscillatory pulses are the least ef
activation kinetics of PEF is an area of research that needs exten ficient for microbial inactivation, and square wave pulses arc
sive further work. Nevertheless, some models have been pro more energy and lethally efficient than exponential decaying
posed and need further evaluation (see Section 3.2). pulses. Bipolar pulses are more lethal than monopolar pulses be
cause a PEF causes movement of charged molecules in the cell
1.6. Summary of Critical Process Factors membranes of microorganisms, and reversal in the orientation or
Three types of factors that affect the microbial inactivation polarity of the electric field causes a corresponding change in the
with PEF have been identified: factors depending on (1) the pro direction of charged molecules (Ho and others 1995; Qin and oth
cess (electric field intensity, pulse width, treatment time and ers 1994). This difference was reported in Bacillus spp. spores
temperature, and pulse waveshapes), (2) microbial entity (type, (Ho and Mittal 1997) and E.coli (Qin and others 1994). With bipo
concentration, and growth stage of microorganism), and (3) lar pulses, the alternating changes in the movement of charged
treatment media (pH, antimicrobials, and ionic compounds, con molecules cause a stress in the cell membrane and enhance its
ductivity, and medium ionic strength). electric breakdown. Bipolar pulses also offer the advantages of
minimum energy utilization, reduced deposition of solids on the
2. Critical Process Factors and How they Impact electrode surface, and decreased food electrolysis (Barbosa
Microbial Inactivation Canovas and others 1999).
As mentioned earlier in this report, the instant-charge-rever
2.1. Analysis of Critical Factors sal pulse can be described as partially positive at first and par
2.1.1. Process factors tially negative immediately thereafter. This characteristic of the
a) Electric field intensity. Electric field intensity is one of the waveshape is influenced by the electrical conductivity of the
main factors that influences microbial inactivation (Htishelguer treated food. In this regard, an increase in conductivity decreas
and Niemann 1980; Dunne and others 1996). The microbial inac es the duration of the positive part of the pulse as well as the
tivation increases with an increase in the electric field intensity, span of the negative part, which in turn increases the overall
above the critical transmembrane potential (Qin and others peak/voltage ratio.
1998). This is consistent with the electroporation theory, in which The difference between a bipolar and instant charge reverse
the induced potential difference across the cell membrane is pulse is the relaxation time between pulses, which is only
proportional to the applied electric field (Section 3.1.2.). Some present in the former. The inactivation effect of an instant-rever
empirical mathematical models (that is, Tables 4 and 5) have sal-charge is believed to be due to a significant alternating stress
been proposed to describe the relationship between the electric on the microbial cell that causes structural fatigue. Ho and Mittal
field intensity and microbial inactivation. The critical electric (1997) reported that instant-reversal-charge may reduce the crit
field Er (electric field intensity below which inactivation does not ical electric field strength required for electroporation of the mi
occur) increases with the transmembrane potential of the cell. crobial cell. The effectiveness of this waveform to inactivate mi
Transmembrane potentials, and consequently Ee, are larger for croorganisms compared to other pulse waveforms can save up to
larger cells (Jeyamkondan and others 1999). Pulse width also in l / 5 or l /6 of total energy and equipment cost. Further work is re
fluences the critical electric field; for instance, with pulse widths quired to verify the effect of reversal-charge pulses on the inacti
greater than 50 s, Ee is 4.9 kV/cm. With pulse widths less than 2 vation ratio. The inactivation of Bacillus subtilis and Bacillus
s, Er is 40 kV/ cm (Schoenbach and others 1997). cereus spores suspended in NaCl solutions has been reported to
The model of Peleg (Table 5) was used to relate the electric be higher when instant reverse pulses and a polarity of electric
field intensity and applied number of pulses required to inacti field chambers with high pulse frequencies are used. Instant re
vate 50% of the cells (Peleg 1995). verse charge has been reported to be effective in inactivation of
b) Treatment time. Treatment time is defined as the product 5-log cycles of Bacillus spp. spores. These researchers estab
of the number pulses and the pulse duration. An increase in any lished that the survival fraction is not only a function of the tem
of these variables increases microbial inactivation (Sale and poral pulse area but that even when both bipolar (alternating ex
Hamilton 1967). As noted above, pulse width influences microbi ponential) and exponential waves had the same area per pulse,
al reduction by affecting Er. Longer widths decrease Ee, which re bipolar waves yielded a higher inactivation ratio (Ho and Mittal
sults in higher inactivation; however, an increase in pulse dura 1997).
tion may also result in an undesirable food temperature in A study conducted by Zhang and others (1997) showed the
crease. Optimum processing conditions should therefore be es effect of square wave, exponentially decaying, and instant
tablished to obtain the highest inactivation rate with the lowest charge-reversal pulses on the shelf-life of orange juice. Three
heating effect. Htilsheger and others (1981) proposed an inacti waveshape pulses were used: (a) square waves with peak electric
vation kinetic model that relates microbial survival fraction (S) field of 35 kV/cm, an effective pulse width of 37.22 s, and a
with PEF treatment time (t). The inactivation of microorganisms pulse rise time of 60 ns; (bl exponential decaying waves with a
increases with an increase in treatment time (Table 4; Htilsheger peak electric field of 62.5 kV/ cm, an effective pulse width of 0.5 7
and others 1983). In certain cases, though, the number of pulses sand a pulse rise time of 40 ns; and (c) charge-reversal waves
increasing inactivation reaches saturation. Such is the case of with a peak electric field of 37 kV/ cm, an effective pulse width of
Saccharomyces cerevisiae inactivation by PEF that reaches satura 0.96 s, and a pulse rise of 400 ns. Square wave pulses were more
tion with 10 pulses of an electric field at 25 kV /cm (Barbosa effective, yielding products with longer shelf-lives than those
Canovas and others 1999). products treated with exponentially decaying and charge reverse
Critical treatment time also depends on the electric field in pulses. In agreement with this study, Love (1998) quantitatively
tensity applied. Above the critical electric field, critical treatment demonstrated the stronger inactivation effect of square wave
time decreases with higher electric fields. Barbosa-Canovas and pulses over other wave shapes.

68 JOURNAL OF FOOD SCIENCE-Supplement

Pulsed Electric Fields ...
Qin and others (1994) studied the inactivation of S. cerevisiae and ionic strength of the medium (SMFU) during PEP treatment.
using square and exponential decay waveforms and a peak elec The inactivation ratio increases from not detectable to 2.5-log cy
tric field of 12 kV/cm and 60 J/pulse for both waveforms. The re cles when ionic strength solutions were adjusted from 168 to
sults of this investigation suggested that both waveforms were 28mM. At 55 kV/cm (8 pulses), as the pH was reduced from 6.8 to
effective in the microbial inactivation, with square wave pulse 5.7, the inactivation ratio increased from 1.45- to 2.22-log cycles.
waveform being the most effective. The PEP treatment and ionic strength were responsible for elec
d) Treatment temperature. Experimental results have dem troporation and compression of the cell membrane, whereas the
onstrated that, in challenge tests, both treatment temperatures pH of the medium affected the cytoplasm when the electropora
and process temperatures impact microbial survival and recov tion was complete. Dunne and others (1996) reported that, de
ery. pending on the microorganism, acidic pH enhanced microbial in
PEP treatments at moderate temperatures (about 50 to 60 C) activation. No mention was made of what microorganisms were
have been shown to exhibit synergistic effects on the inactiva affected or what range of pH was used.
tion of microorganisms (Jayaram and others 1992; Dunn and b) Particulate foods. Inactivation of microorganisms in liquid
Pearlman 1987). With constant electric field strength, inactiva particulate systems has been studied by Dunne et at (1996). E.
tion increases with an increase in temperature. Because the ap coli, L. innocua, Staphyloccocus aureus, and Lactobacillus acido
plication of electric field intensity does cause some increase in philus were suspended in a 2 mm diameter alginate beads mod
the temperature of the foods, proper cooling is necessary to el, and the effect of variables in PEP microbial inactivation was
maintain food temperatures far below those generated by ther tested. The researchers concluded that the process was effective
mal pasteurization. in killing microorganisms embedded in particulates. However, to
The effect of temperature was observed when E. coli reduc achieve more than a 5-log cycle reduction, high energy inputs
tion increased from 1 to 6.5-log reduction cycles with a tempera were needed (70 - 100 J/ml, depending on the bacteria). With
ture change from 32 to 55 C (Vega-Mercado and others 1996a). A those high PEP intensities, the possibility of dielectric break
higher lethal effect of PEP treatment is accomplished by increas down exists- a limitation still to be overcome. Qin and others
ing the process temperature to 25 C, from 5 or 10 C. This may be (1995c) reported that dielectric breakdown occurs when air or liq
due to the increase in the electrical conductivity of the solution uid vapor is present in the food because of the difference in di
at the higher temperature (Marquez and others 1997). The au electric constant between liquid and gas. Likewise, dielectric
thors suggested that the leakage of mobile ions in decoated breakdown may occur at a particle- to -liquid interface due to dif
spores may increase as the temperature is raised due to an in ferences in electric constants.
crease in average kinetic energy of the ions. A higher tempera c) Hurdle approach. In general, the combination of factors
ture also increases the motion of the solvent molecules in both (hurdles) such as pH, ionic strength and antimicrobial com
the surrounding cortex and the core so that the molecules could pounds during PEP treatment would be an effective means to
migrate from one electrode to the other. aid in the inactivation of microorganisms with PEE
Additional effects of high treatment temperatures are chang
es in cell membrane fluidity and permeability, which increases 2.1.3. Microbial factors
the susceptibility of the to cell to mechanical disruption (Hulshe a) Type of microorganisms. Among bacteria, those that are
ger and others 1981). Also, a low transmembrane potential de gram-positive are more resistant to PEP than those that are
creases Ee and therefore increases inactivation (Jeyamkondan gram-negative (Hillsheger and others 1983). In general, yeasts
1999). are more sensitive to electric fields than bacteria due to their
larger size, although at low electric fields they seem to be more
2.1.2. Product factors resistant than gram-negative cells (Sale and Hamilton 1967; Qin
a) Conductivity, pH, and ionic strength. The electrical con and others 1995a). A comparison between the inactivation of 2
ductivity of a medium (rr, Siems/m), which is defined as the abili yeast spp. of different sizes showed that the field intensity need
ty to conduct electric current, is an important variable in PEE ed to achieve the same inactivation level was inversely propor
Electrical conductivity is the inverse of the resistivity, which is tional to cell size. Those results are logical but inconsistent with
defined by the Jetter r and measured in ohm-meters cn.m). results by Hillsheger and others (1983). Studies need to continue
Foods with large electrical conductivities generate smaller peak in this area to better understand the effect of the type of micro
electric fields across the treatment chamber and therefore are organism on microbial inactivation.
not feasible for PEP treatment (Barbosa-Canovas and others b) Concentration of microorganisms. The number of microor
1999). Inactivation of Lactobacillus brevis with PEP showed that ganisms in food may have an effect on their inactivation with
as the conductivity of the fluid increased, the resistance of the electric fields. Barbosa-Canovas and others (1999) reported that
treatment chamber was reduced (Jayaram and others 1992). inactivation of E. coli in a model food system of simulated milk
which in turn reduced the pulse width and decreased the rate of ultrafiltrate (SMUF) was not affected when the concentration of
inactivation. Because an increase in conductivity results from in microorganisms was varied from 1Q3 to 108 cfu/ml after being
creases the ionic strength of a liquid, an increase in the ionic subjected to 70 kV/cm, 16 pulses, and a pulse width of 2 s. In
strength of a food results in a decrease in the inactivation rate. creasing the number of S. cerevisiae in apple juice resulted in
Furthermore, an increase in the difference between the conduc slightly lower inactivation (25 kV/ cm, 1 pulse, and pulse width of
tivity of a medium and microbial cytoplasm weakens the mem 25 s). The effect of microbial concentration on inactivation may
brane structure due to an increased flow ionic substance across be related to cluster formation of yeast cells or possibly con
the membrane. Thus, the inactivation rate of microorganisms in cealed microorganisms in low electric field regions.
creases with decreasing conductivity even with an application of c) Growth stage of microorganisms. In general, logarithmic
equal input energy (Jayaram and others 1992). Another study by phase cells are more sensitive to stress than Jag and stationary
Dunne and others (1996) with a model system showed resistivity phase cells. Microbial growth in logarithmic phase is character
had no effect on PEP effectiveness on E. coli and L. innocua. ized by a high proportion of cells undergoing division, during
These apparent controversial results may be due to the microor which the cell membrane is more susceptible to the applied elec
ganisms or media used. tric field. Hillsheger and others (1983) concluded that cells from
Vega-Mercado and others (1996b) studied the effect of pH logarithm growth phase are more sensitive to PEP than from the

Supplement-JOURN1'L.. OF FOOD SCIENCE 69

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

stationary growth phase. Likewise, E. coli cells in the logarithmic recirculation whereby the product is processed several consecu
phase were more sensitive to PEP treatment when compared to tive times (Barbosa-Canovas and others 1999). Liu and others
cells in the stationary and lag phases (Pothakamury and others (1997) reported that PEP and organic acids (benzoic and sorbic)
1996). Studies with S. cerevisiae have shown that the susceptibili achieved 5.6- and 4.2-log cycle reductions, compared to a I-log
ty of actively growing cells to PEP also occurs with yeast cells (Ja cycle reduction when PEP was used alone, suggesting enhanced
cob and others 1981; Gaskova and others 1996). For instance, effects with the combination of PEP and organic acids.
Gaskova and others (1996) reported that the killing effect of PEP The higher efficiency of bipolar pulses versus monopolar
in the logarithmic phase is 30% greater than of those in station pulses was suggested by Qin and others (1994). Cells of B. subtilis
ary phase of growth. were reduced to 3- and <2-log cycles when bipolar and monopo
lar pulses were applied, respectively.
2.2. Data from Microbial Inactivation Studies Inactivation studies on the effects of PEP on bacterial spores
Numerous publications on inactivation present data on vege are scarce and results vary. Early studies (Sale and Hamilton
tative cells, the majority of them from a few genera. Tables I, 2, 1967) reported that Bacillus spp. spores were resistant to expo
and 3 summarize research on the inactivation of microorganisms nential wave PEP with strength fields up to 30 kV/cm. Only after
and enzymes. Table 1 lists the published papers on microorgan germination did they become sensitive to PEE Simpson and oth
isms and enzymes, except for E. coli and S. cerevisiae. Tables 2 ers (1995) confirmed the high resistance of B. subtilis spores to
and 3 list inactivation data collected from S. cerevisiae and E. coli, PEF, and subsequently studied a hurdle approach with heat
respectively. The tables include, when available, information on shock, lysozyme, EDTA, and pH. Only a combination of 80 C
the treatment vessel, process conditions (treatment time, tem heat-shock, Iysozyme, followed by PEP at 60 C was able to
perature, electric field intensity, number of pulses, and wave achieve a 2- to 4-log cycle reduction of spores. The resistance of
shape). media, and data on the log reduction achieved. spores to PEP was shown by Pothakamury (1995). They reported
Various inactivation levels of S. cerevisiae have been achieved only 3- to 4-log reduction cycles for B. subtilis ATCC 9372 spores
in food models and foods using a variety of PEP chambers and that were subjected to 60 pulses of 16 kV/ cm electric field inten
experimental conditions (Mizuno and Hori 1991; Zhang and oth sity and 200 - 300 s pulse widths. Pagan and others ( 1998)
ers 1994a, 1994b; Qin and others 1994, 1995a). Other yeasts of found that spores of B. subtilis were not inactivated when PEP (60
importance in food spoilage have also been reduced, suggesting kV/cm, 75 pulses) was used in combination with high hydrostatic
PEF's potential to prevente or delay yeast-related food spoilage. pressure (HHP) (1500 atm, 30 min, 40 C)_ These treatments,
Fernandez-Molina and others (1999) reported 2.6- and 2.7-log however, induced the germination of the spores of B. subtilis by
reductions for different microorganisms such as L. innoccua and more than 5-log cycles, making them sensitive to subsequent
Pseudomonasfluorescenswith 2 s 100 pulses at 50 kV/cm at am pasteurization heat treatment. Thus, combinations of HHP. PEE
bient temperature. The influence of the food composition was and heat treatments constitute an alternative to the stabilization
shown by Calderon-Miranda (1998) studies where L. innoccua of food products by heat to inactivate spores. Marquez and oth
was reduced by 2.4- and 3.4-log cycle reductions in raw skim milk ers (1997) successfully inactivated 3.4- and 5-log cycles of B. sub
and liquid whole egg, respectively, under the same experimental tilis and B. cereus spores at room temperature, an electric field of
conditions. 50 kV /cm, and 30 and 50 instant-charge-reversal pulses, respec
HUlsheger and others (1983) tested PEF inactivation effec tively.
tiveness of a variety of microorganisms in phosphate buffer, un As Tables I. 2, and 3 show, many researches have studied the
der the same conditions. The results from these studies suggest effects of pulsed electric fields in microbial inactivation; howev
ed that L monocytogenes (2-log reduction) is more resistant to er, due to the numerous critical process factors and broad experi
PEF than Pseudomonas auruginosa or S. aureus (3- to 3.5-log re mental conditions used, definite conclusions about critical pro
duction cycles). and that Candida albicans was the most sensitive cess factors effects on specific pathogen reductions cannot be
microorganism among them (4.5-log reduction cycle). For these made. Research that provides conclusive data on the PEF inacti
experiments 30 pulses of 36 s duration of 20 kV/cm were ap vation of pathogens of concern is clearly needed.
plied.
Grahl and others (1992) reported the influence of pulse num 3. Mechanisms of Microbial Inactivation
ber in microbial inactivation of E. coli. They were able to reduce
populations of E. coli in UHT milk by 1-, 2-, and 3-log cycles when 3.1. Analysis of Microbial Inactivation Mechanism (sl
5, 10, and 15 pulses (22 kV/cm) were applied. Qin and others Two mechanisms have been proposed as the mode of action
(1998) achieved more than a 6-log cycle reduction in E. coli sus of PEP on microorganisms: electrical breakdown and electropora
pended in simulated milk ultrafiltrate (SMUF) using electric field tion.
intensity of 36 kV /cm with a 5-step (50 pulses) PEP treatment.
The temperature in the chamber was maintained below 40 c 3.1.1. Electrical breakdown
during the PEP treatment, which is lower than the temperature Zimmermann (1986), as shown in Fig. 5, explains what electri
of commercial pasteurization (70 to 90 C) for milk. Hillsheger cal breakdown of cell membrane entails. The membrane can be
and others (1983) reported a 4-log reduction of E.coli in an elec considered as a capacitor filled with a dielectric (Fig. Sa). The nor
tric field intensity of 40 kV/cm accompanied with a long treat mal resisting potential difference acro1;1; the rneml.Jrn11e v 111 1:; 10
ment time of 1080 s. A PEP method suitable to inactivate up to mV and leads to the build-up of a membrane potential differ
7-log cycles of E. coli with fewer pulses (20 versus 70) is stepwise ence V due to charge separation across the membrane. V is pro-

Table 1 Inactivation kinetics of microorganisms and enzymes by pulsed electrlc fields CPF)
Source Microorganisms Suspension media Log reduction (max) Treatment Vessel Process condltlonsb
Fernandez-Molina Listeria innocua Raw skim milk 2.6 C, coaxial, 29 ml. d = 0.63, 15 to 28 C, 0.51/min
and others (1999) ( 0.2% milkfat) 100 pulses, 50 kV/cm
0.5 F, 2s, 3.5 Hz
Exponential decay

70 JOURNAL OF FOOD SCIENCE-Supplement

Pulsed Electric Fields ...
Fernandez-Molina Pseudomonas Raw skim milk 2.7 C,coaxial, 29 ml, d = 0.63, 15 to 28 C, 0.5 I/min
and others ( 1999) fluorescens (0.2% milkfat) 30 pulses, 50 kV/cm
0.5 F, 2s, 4.0 Hz
Exponential decay
Reina Listeria Pasteurized whole milk 3.0-4.0 C, cofield flow, 20 ml, 10 to 50 C, 0.071/s
and others ( 1998) . monocytogenes (3.5% milkfat) 30 kV/cm
(scott A) 2% milk (2% milkfat) 1.5s, 1,700 Hz
skim milk (0.2%) bipolar pulses
t = 600S
Calderon-Miranda L. innocua Raw Skim milk 2.4 C, continuous, 29 ml 22 to 34 C, 0.5 I/min
(1998) d = 0.6 cm 2 S, 3.5 Hz
32 pulses, 50 kV/cm
Exponential decay
Calderon-Miranda L. innocua Liquid whole egg (LWE) 3.4 C, continuous, 29 ml,2 6 to 36 C, 0.5 I/min
(1998) d = 0.6 cm 32 pulses, 50 kV/cm
2s, 3.5 Hz
Exponential decay
Hulsheger and Klebsiella Phosphate buffer 3.0 B, 4 ml, d = 0.5 cm, 2.o V/m, 36 sec, 30
others ( 1983) pneumoniae parallel plates pulses, exponential
ATCC27736 decay, t= 1080s
Sensoy and Salmonella Skim milk 3.0 C, continuous, cofield 10 to 50 C, 15-40 kv/cm,
others (1997) Dublin 12-127 S
Lubicki and Yersinia NaCl solution pH= 7.0 6.0-7.0 B, Parallel electrodes 2 to 3 C, 75 kV, 150-200 pulses
Jayaram ( 1997) enterocolitica 500-1300 ns
Hulsheger and Pseudomonas Phosphate buffer 3.5 B, 4 ml, d = 0.5 cm 2.o V/m, 36 m sec, 30
others ( 1983) aeruginosa pulses, exponential decay,
t= 1080s
Hulsheger and Staphylococcus Phosphate buffer 3.0 B, 4 ml, d = 0.5 cm 2.o V/m, 36 m sec, 30
others ( 1983) aureus (ATCC 25923) pulses, exponential decay,
t= 1080s
Hulsheger and Listeria Phosphate buffer 2.0 B, 4 ml, d = 0.5 cm 2.o V/m, 36 m sec, 30
others (1983) monocytogenes pulses, exponential decay,
t= 1080s
Hulsheger and Candida albicans Phosphate buffer 4.5 B, 4 ml, d = 0.5 cm 2.o V/m, 36 m sec, 30
others ( 1983) pulses, exponential decay,
t= 1080s
Dunn and Salmonella Milk 4.0 B, parallel plates 63 C, 3.67 V/m, 36s,
Pearlman ( 1987) Dublin 40 pulses
Dunn and Lactobacil/us Yogurt 2.0 B, parallel plates 50 C, 1.8 V/m
Pearlman (1987) brevis
Gupta and Salmonella NaCl 5.0 B, d= 6.35 mm 1s, 20 pulses, exponential,
Murray ( 1989) Typhimurium 83 kV/cm
Gupta and Pseudomonas Milk 4.5 B, d= 6.35 mm 9.0 V/m, 1s, 10 of Murray
(1989) fragi 6.8 V/m + 1 of 7.5 V/m +
1 of 8.3 V/m + 5 of 9.0 V/m
Jayaram and L. brevis NaH 2 P04 / 9.0 B, parallel plate, 60 C, 2.5 V/m, 46s, 200
others (1992) N~HP04 Hp 0.5ml, d = 0.2cm pulses, t= 1O,OOOs
Pothakamury (1995) Lactobacillus SMUF 4.0-5.0 B,1 ml, d= 0.1cm <30 C, 1.6V/m, 200-300s
delbrueckii 40 pules exponential decay,
ATCC 11842 t=10,000s
Pothakamury (1995) Bacillus SMUF 4.0-5.0 B, parallel plate, <30 c, 1.6 V/m, 200-300s
subtilis spores 1 ml,d=0.1cm 50 pulses, exponential decay,
ATCC9372 t= 12,500s

Pothakamury S. aureus SMUF 3.0-4.0 B, parallel plate, <30 C, 1 .6 V/m, 200-300s

and others (1995) 1 ml, d=0.1 cm 60 pulses, exponential decay
Vega-Mercado B. subtilis spores Pea soup 5.3 C., coaxil, 0.51 / min <5.5 C, 3.3 V/m, 2s,
and others ( 1996a) ATCC9372 0.5 mF, 4.3 Hz, 30 pulses,
exponential decay
Ho and others (1995) P. fluorescens Distilled water, > 6.0 B, 49.5, 99.1, 148.6 ml 20 C, 2.5 V/m, 2ec, 10-20
10-35% sucrose d = 0.3 pulses,
0.1 and 0.5% xanthan t = 2sec, reverse polarity
0.1 and 0.5 % sodium chloride
Qin and B. subtilis SMUF 4.5 B. parallel plate, 1.6 V/m, monopolar. 180s,
others ( 1994) 100 I, d=0.1cm 13 pulses
Qin and B. subtilis SMUF 5.5 B. parallel plate, 1.6 V/m, bipolar, 180s,
others (1994) 100 I, d=0.1cm 13 pulses
Keith and Aerobic Plate Basil, dill, onion 0.30 B, chamber, 10 ml 10-25 kV/cm, 1-10180s.sec,
others ( 1997) Count d = 5 mm, 200 ml 200-320 ms, bipolar pulses
d=9mm
Castro ( 1994) Alkaline Phosphatase Raw milk, 2% milk 65% B, Cuvette, d = 0.1 cm 22 to 49 c. 18 to 22 kV/cm,
Non-fat milk, SMUF 70 pulses, 0.7-0.8s
Vega-Mercado Plasmin SMUF 90% C, parallel plate 150 C, 30-40 kV/cm, 50 pulses.
and others (1995) 0.1 Hz, 2s
Ho and Lipase, glucose
others ( 1997) Oxidase, a-amylase Buffer solutions 70-85% B, circular chamber, 13-87 kV/cm, 30 instant charge
Peroxidase, Phenol 30-40% 148ml reversal pulses, 2s, 2 sec.
oxidase 0.12 F
8 B. batch. C, continuous, d, gap between electrodes

bTemperature, peak electric field, pulse width, number of pulses and shape, and I, total treatment time (sec).

Supplement-.JOURNAL OP FOOD SCIENCE 71

JFS SUPPLEMENr. Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Table 2-Summar, of SacclNtromycn cere'lfla#N lnactlvlltlon with PP
Source Suapenslon media Log reduction Treatment Veeael Process condHlonsb
(max)
Jacob and others (1981) 0.9%NaCI 1.3 B, 3 ml, d= 0.5 cm 3.5 V/m, 20s, 4 pulses
Dunn and Pearlman (1987) Yogurt 3 B 55 C, 1.8 V/m
Hulsheger and others (1983) Phosphate buffer, 3 stationary cells, B, 4ml, d= o.5 cm 2.0 V/m, 36s, 30 pulses
PH 7.0 4 Logarithmic cells t= 1080S
Mizuno and Hori ( 1988) Deionized water 6 0.77 cal/cm3/pulse, B, 2.0 V/m, 160s, 175 pulses
Parallel plate, 0.5 cm 3 , exponential decay
d= 0.8 cm
Matsumoto and others (1991) Phosphate buffer 5 B 3.0 V/m
Yonemoto and others (1993) 0.85% 2 B, parallel plate, 2 ml, 0.54 V/m, 90s, 10 pulses
d= 0.55 cm
Zhang and others (1994b) Potato dextrose agar 5.5 62 J/ml, B, 14 ml 15 1 c. 4.0 V/m, 3s, 16
Pulses
Qin and others (1994) Apple juice 4 270 J/pulse, B, parallel plate <30 c, 1.2 V/m, 20 pulses,
Exponential decay
Qin and others (1994) Apple juice 4.2 270 J/pulse, B, parallel plate <30 c, 1 .2 V/m, 20 pulses,
Square wave
Zhang and others (1994a) Apple juice 4 260 J/pulse, B, parallel plate, 4-10 C, 1.2 V/m, 90s,
6 pulses, exponential decay
Zhang and others (1994a) Apple juice 3.5 260 J/pulse, B, 4-10 C, 1 .2 V/m, 60s,
Parallel plate, 25 ml, 6 pulses, square wave
d= 0.95 cm
Zhang and others (1994a) Apple juice 3-4 558 J/pulse, B, <25 c. 2.5 V/m, 5 pulses
Parallel plate, 25.7 ml,
d= 0.95 cm
Qin and others (1995a) Apple juice 7 C, coaxial, 29 ml, d= 0.6 cm, <30 C, 2.5 V/m, 2-20s,
0.2 F, 1 Hz 150 pulses, exponential decay
Qin and others (1995a) Apple juice 6 28 J/ml, C, coaxial, 30 ml, 22-29.6 C, 5.0 V/m, 2.5s,
2-101/min 2 pulses
Grahl and others (1992); Orange juice 5 B, 25 ml, d= 0.5 cm, 0.675 V/m, 5 pulses
Grahl and Marki (1996) E = 4.7
From Barbosa-Canovas and others (1999).

b B, batch; C, continuous.

cTemperature, peak electric field, pulse width, number and shape, and total treatment time (t).

portional to the field strength E and radius of the cell. The in small molecules after being exposed to an electric field, and per
crease in the membrane potential leads to reduction in the cell meation then causes swelling and eventual rupture of the cell
membrane thickness. Breakdown of the membrane occurs if the membrane (Fig. 6) (Vega-Mercado 1996b). The main effect ofan
critical breakdown voltageVc (on the order of 1 V) is reached by a electric field on a microorganism cell is to increase membrane
further increase in the external field strength (Fig. Sc). It is as permeability due to membrane compression and poration
sumed that breakdown causes the formation oftransmembrane (Vega-Mercado and others 1996b). Kinosita and Tsong (1977;
pores (filled with conductive solution), which leads to an imme 1979) demonstrated that an electric field of 2.2 kV/cm induced
diate discharge at the membrane and thus decomposition of the pores in human erythrocytes of approximately 1 nm in diameter.
membrane. Breakdown is reversible if the product pores are Kinosita and Tsong (1977) suggested a 2-step mechanism for
small in relation to the total membrane surface. Above critical pore formation in which the initial perforation is a response to an
field strengths and with long exposure times, larger areas of the electrical suprathreshold potential followed by a time-depen
membrane are subjected to breakdown (Fig. Sd). If the size and dent expansion of the pore size (Fig. 6). Large pores are obtained
number of pores become large in relation to the total membrane by increasing the intensity of the electric field and pulse dura
surface, reversible breakdown turns into irreversible breakdown, tion or reducing the ionic strength of the medium.
which is associated with mechanical destruction of the cell mem In a lipid model vesicle (liposome), the electrophoretic move
brane. ment of ions and water dipoles through the spontaneous hydro
The corresponding electric field is EcrttlcaJ = Vcritical I f8 , where a phobic pores is postulated to be the first event of electropora
is the radius of the cell and f is a form that depends on the shape tion, after which lipid molecules rearrange to form more stable
of the cell (Schoenbach and others 1997). For a spherical cell, fis hydrophilic pores. This could also take place in a cell membrane.
1.5; for cylindrical cells of length l and hemispheres of diameter d In addition, protein channels, pores, and pumps in these mem
at each end, the form factor is f = l(l - d) /3. Typical values ofVcrttlcal branes are extremely sensitive to transmembrane electric field
required for the lysing of E. coli are on the order of 1 V. The critical and become initiation sites for the electropores (Tsong 1990). In
field strength for the lysing of bacteria with a dimension of approx the cell membrane charges to electric dipoles of lipids, proteins,
imately 1 mm and critical voltage of 1V across the cell membrane is carbohydrates, and ions and the polarizability of these mole
therefore on the order of 10 kV/ cm for pulses of 10 microsecond to cules make up the electric field. Therefore, electroporation oc
millisecond duration (Schoenbach and others 1997). curs both in the liposomes and cell membranes, but the mole
cules affected by the applied field are not necessarily the same
3.1.2. Electroporation in these 2 systems (Tsong 1990). The gating potentials to the
Electroporation is the phenomenon in which a cell exposed to channel constituted by the proteins are in the 50 - mV range
high voltage electric field pulses temporarily destabilizes the lip (Castro and others 1993).
id bilayer and proteins of cell membranes (Castro and others Miller and others (1988) found that electroporation permits
1993). The plasma membranes of cells become permeable to the uptake of DNA by mammalian cells and plant protoplasts

72 JOURN1'L Of' POOD SCIENCE-Supplement

Pulsed Electric Fields ...
Table a-Summary of clterlchl coll Inactivation with PP"
Source Suspension media Log reduction Treatment Vesaelb Proceu conditions
(max)
Sale and Hamilton (1967) 0.1%NaCI 2 8 20 c, 1.95 V/m, 20s, 10 Pulses
Hulsheger and 17.1 mM saline, Na2S20 3 , 3-4 8, 4 ml, d= 0.5 cm <30 C, 2.0 V/m, 30s,
Nieman (1980) NaH 2PO/N82HPO, 1O pulses, t= 300s
PH 7.0
Hulsheger and Phosphate buffer, pH 7.0 3 stationary Cells, 8, 4ml, d= o.5 cm 2.0 V/m, 36s, 30 pulses
others (1983) 4 Logarithmic Cells t= 1080 S
Dunn and Pearlman (1987) Milk 3 8 43 C, 3.3 V/m, 35 pulses
Matsumoto and Phosphate buffer 5 8 4.0 V/m, 4-10 S,
others (1991) Exponential decay
Grahl and others (1992); Sodium alginate 4-5 8, 25 ml, d= 0.5 cm <45-50 C, 2.5 V/m, 5 pulses
Grahl and Marki (1996)
Grahl and others (1992); UHTmilk 8, 25 ml, d= 0.5 cm < 45-50 c, 2.24 V/m, 5 pulses
Grahl and Marki (1996) (1.5% fat) 5.0.F
Grahl and others (1992); UHTmilk 2 8, 25 ml, d= 0.5 cm < 45-50 C, 2.24 V/m, 10 pulses
Grahl and Marki (1996) (1.5% fat) 5.0.F
Grahl and others (1992); UHTmilk 3 8, 25 ml, d= 0.5 cm < 45-50 C, 2.24 V/m, 15 pulses
Grahl and Marki (1996) (1.5% fat) 5.0.F
Grahl and others (1992); UHTmilk 4 8, 25 ml, d= 0.5 cm < 45-50 c, 2.24 V/m, 20 pulses
Grahl and Marki (1996) (1.5% fat) 5.0F
Zhang and others (1994b) Potato dextrose agar 3 8, 14ml 15 1c, 4.0 V/m, 3s, 16 Pulses
Zhang and others (1994b) Potato dextrose agar 6 8, 14ml 15 1c, 4.0 V/m, 3s, 64 Pulses
Zhang and others (1994b) Skim milk 0.5 8 15 1c, 4.0 V/m, 3s, 16 Pulses
Zhang and others (1994b) Skim milk 3 8 15 1c, 4.0 V/m, 3s, 64 Pulses
Zhang and others (1994a) SM.JF 3 604 J, B, parallel plate, < 25 C, 2.5 V/m, 20 pulses
25.7 ml, d= 0.95 cm
Pothakamury and SM.JF 4 B, parallel plate, 1 ml, < 30 C,
others (1995) d= 0.1 cm 1.6 (1.2, 1.4, 1.6 tested) V/m,
200-300 S,
60 (20, 30, 40, 50, 60) pulses
Qin and others (1994) SM.JF 1.5 80 J/pulse, B, < 30 C, 4.0 V/m, 8 pulses,
Parallel plate oscillatory decay
Qin and others (1994) SMJF 3 80 J/pulse, B, < 30 C, 4.0 V/m, 8 pulses,
Parallel plate oscillatory decay
Qin and others (1994) SM.JF 3 60 J/pulse, B, < 30 C, 4.0 V/m, 4 pulses,
Parallel plate monopolar
Qin and others (1994) SMJF 3 60 J/pulse, B, < 30 C, 4.0 V/m, 4 pulses,
Parallel plate bipolar
Qin and others (1995c) Skim milk 2.5 B, parallel plate, 14 ml < 30 C, 5.0 V/m, 2s,
62 pulses, square wave
Qin and others (1995c) Skim milk 3.5 C, parallel plate < 30 C, 5.0 V/m, 2s,
48 pulses, square wave
Qin and others (1995c) SMJF 3.6 C, parallel plate 8 cma < 30 C, 5.0 V/m, 2s,
d=0.51 cm 48 pulses, square wave
Qin and others (1995a) SMJF 7 C, coaxial, 29 ml, < 30 C, 2.5 V/m,
d= 0.6 cm, 0.2F, 1 Hz 300 pulses, exponential decay
pulse width 20 s
Martin-Belloso Skim milk diluted Nearly 3 B, parallel plate, 13.8 ml, 0.51 cm 15 C; 4.0 V/ m; 6s
and others (1997b) with water (1 :2:3)
Martin-Belloso Skim milk 2 C, parallel plate with flow-through 15 C; 4.5 V/ m; 1.8s
and others (1997b) Capability, 45 ml/sec, v= 8ml 64 pulses
Martin-Belloso Liquid egg 6 C, coaxial, 11.9 ml, d= 0.6 cm, <37 C; 2.6 V/ m; 4s
and others (1997a) 0.51/min 100 pulses, color changes
Vega-Mercado Pea soup 6.5 C, coaxial, 0.5 1/min >53 C; 3.3 V/ m; 2S
and others (1996a) 30 pulses
Zhang and others (1995a) ModifiedSMUF 9 B, parallel plate, 14 ml, d= 0.51 cm
Pothakamury and SMJF 4 B, parallel plate, 12.5 ml, d = 0.5 cm <30 C; 16 V/ m; 200-300s
others (1995) Exponential decay
Pothakamury and SMJF 5 C, parallel plate
others (1995)
From Barbosa-Canovas and others (1999).
bB, batch; C, continuous.
cTemperature, peak electric field, pulse width, number of pulses and shape, and total treatment time (t).

because it induces transient permeability to the cell membrane. pension to a high-voltage potential decay discharge of 5 13 kV/

These researchers demonstrated the utility of high-voltage elec cm with a short treatment time ranging

troporation for the genetic transformation of intact bacterial cells between 2.4 - 2.6 .s in the presence of plasmid DNA. Electri

by using the enteric pathogen Campylobacter jejuni as a model cal transformation of C. jejuni resulted in frequencies as high as

system. The method involved the exposure of a C. jejuni cell sus- 1.2 x 10s transformats per .g of DNA.

Supplement-JOURNAL OF FOOD SCIBHCB 73

Jf'S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
3.2. Inactivation Models
Hillsheger and Niemann (1980) were the first to propose a S (_!_J-(E-EJ
= (3)
mathematical model for inactivation of microorganisms with PER tc K
Their model was based on the dependence of the survival ratio S
(N /N 0 or the ratio of living cell count before and after PEF treat where tis treatment time, tc is critical treatment time, Ee is criti
ment) on the electric field intensity E according to the following cal electric field intensity, and K is the kinetic constant. Table 4
expression: shows K values calculated by fitting experimental data for the cit
ed microorganisms (Hillsheger 1983). A small value for the kinet
(1) ic constant [Kl indicates a wide span in the inactivation rate
curve and lower sensitivity to PEF, whereas a large value implies
where bE is the regression coefficient, Eis the applied electric a steep decline or higher susceptibility to PEE Lower Ee values
field, and Ee is the critical electric field obtained by the extrapolat would indicate less resistance to the PEF treatment.
ed value of E for 100% survival. The regression coefficient de Table 4 shows that Ee for gram-negative bacteria is lower than
scribes the gradient of the straight survival curves and is a micro that for gram-positive, in accordance with the smaller PEF resis
organism-media constant. The critical electric field (Eel has been tance of the former. The kinetic constant for the yeast C. albicans
found to be a function of the cell size (much lower for large cells) is smaller than for gram-negative and gram-positive bacteria, im
and pulse width (that is, with pulse width > 50 .s, Ee = 4.9 kV/cm; plying that yeast are more resistant to inactivation with PEF than
pulse width> 2 .s, Ee= 40 kV/cm). Hillsheger and others (1981) bacteria. This result is inconsistent with results from other stud
proposed an inactivation kinetic model that relates microbial sur ies. The table also shows that E. coli cells in the log stage of
vival fraction (S) with PEF treatment time (t) in the form of growth have lower tc and Ee and higher K than cells, which is in
accordance with other studies. Correlation coefficients of the
ln(SJ = -b,In (t/tel (2) lines where high, indicating the model may have some future
use.
where b1 is the regression coefficient, t is the treatment time, and A second model proposed by Peleg (1995) describes a sig
tc is the extrapolate value oft for 100% survival, or critical treat moid shape of the survival curves generated by the microbial
ment time. The model can also be expressed as inactivation with PEE The model (equation 4) represents the
percentage of surviving organisms as a function of the elec

V'm
V>>V'm
.....E
. . . . .- -E

~ ~
a + b + C d
+
+
+ M +

+- V/J
E
Cytoplasm + D
I
-+ +
+ u
~
+
+
+

Pig. a-Schematic diagram of reveralbl and lrreveralble breakdown. (al cell membrane with potentlal V'm, (bl membrane comprenlon, (cl
pore formation with reveralbl breakdown, (di large area of the membrane aubJ-ted to lrreveralbl breakdown with large pore
(Zimmermann, 11811

Pore Initiation Water Influx Membrane Rupture

+ Electric Field

~

0

~
0

eo
0

'Water/'
eo
Swelling CeULysi Inactive CeH
I
Fig. -lctroporatlon of cell membrane (Vega-Mercado, 18Hbl

74 JOURNAL Of' FOOD SCIENCE-Supplement

Pulsed Electric f'lelds ...
tric fields and number of pulses applied. This model is de Table 4-Klnetlc constants of HOlahelger's model for different ml
croorganlama auapendecl In Na1 HPOiKH1 PO4 buffer with pH of 7.0.
fined by a critical electric field intensity that corresponds to
50% survival (Ed) and a kinetic constant (Kn, a function of the Microorganism E t E0 t0 K r
number of pulses) that represents the steepness of the sig (kV/cm) (.s) (kV/cm) (jlol) (kV/cm) @

moid curve: Escherichia coli (4 h) 1 4 - 20 0.07 -1.1 0.7 11 8.1 97.7

E.coli (30 h) 1 10 - 20 0.07-1.1 8.3 18 6.3 97.6
Klebsie/la pneumonia 8 - 20 0.07 - 1.1 7.2 29 6.6 95.7
Pseudomonas auriginosa 8 - 20 0.07-1.1 6.0 35 6.3 98.4
(4) Staphylococcus aureus 14 - 20 O.Q7 - 1.1 13.0 58 2.6 97.7
Listeria monocytogenes I 12 - 20 0.07-1.1 10.0 63 6.5 97.2
L. monocytogenes II 1O - 20 0.07 -1.1 8.7 36 6.4 98.5
Candida albicans 1O - 20 0.14 - 1.1 8.4 110 2.2 96.6
(From Hulsheger and others 1983)
Mathematically, about 90% inactivation is achieved within E. electric field; t, treatment time; Ee, critical electric field; le, critical time; K, kinetic constant;
r, correlation coefficient of regression line; 1Incubation time.
the critical electric field plus 3 times the kinetic constant. In this
generalized model, Ein) and K(n) are algebraic functions that
not only depend on the electric field but also on the number of Table ti-Kinetic Conatanta of Peleg._ model
pulses or treatment time. The Organlam Numberof Ed K rz
Pulses (kV/cm) (kV/cm)
Lactobacillus brevis 11.4 1.6 0.973
1 Saccaromyces cerevlsiae 13.2 2.3 0.994
S=---
E-Ed
(5)
Staphylococcus aureus 14.1 2.0 0.991
Candida albicans 2 21.2 3.1 0.999
I +e K 4 15.3 3.1 0.993
10 10.1 1.3 0.997
30 7.5 1.2 0.999
model can be simplified by not considering the relationship be Listeria monocytogenes 2 14.9 2.8 0.981
tween the electric field and the number of pulses: 4 12.7 2.0 0.994
A small value for the kinetic constant [K (n) or Kl indicates a 10 10.3 2.4 0.990
wide span in the inactivation rate curve and lower sensitivity to Pseudomonas aeruginosa 30 8.5 2.0 0.999
2 12.9 2.6 0.982
PEF. whereas a large value implies a steep decline or higher sus 4 10.6 2.4 0.994
ceptibility to PER Lower Ed values would indicate less resistance 10 8.3 2.1 0.990
to the PEF treatment. 30 6.7 1.8 0.999
(from Peleg 1995)
Table 5 shows the kinetic constant for various microorganisms Ed electrical field when 50% of population Is reduced; K. kinetic constant; r2, regression
calculated using Peleg's equation. Experimental data was com coefficient
piled from various published studies performed with those mi
croorganisms and were fitted to the Peleg's model (Peleg 1995).
Results indicate that the higher the number of pulses, the lower mercial food pasteurization that requires 6- to 7-log reduction cy
the Ed and kinetic constant K. The high regression coefficients for cles (Zhang and others 1995a).
all the studies show the model has potential use to predict micro In conclusion, numerous critical process factors exist. Careful
bial inactivation. ly designed studies need to be performed to better understand
how these factors affect populations of pathogens of concern.
4. Validation/Critical Process Factors
4.2. Methods to Measure Critical Process Factors
4.1. Summary of Critical Process Factors PEF critical process factors may be monitored as follows:
Extensive microbial inactivation tests have been conducted Pulse voltage waveform. The average electric field
to validate the concept of PEF as a non-thermal food pasteuriza strength is calculated by dividing the peak voltage by the gap
tion process (Zhang and others 1994a, 1994b; Zhang and others distance between the electrodes. A voltage probe and an oscillo
1995a, 1995b; Pothakamury and others 1995; Keith and others scope make such measurement. Data logging is necessary to
1996, Marquez and others 1997; Qin and others 1995a, 1995b. keep this critical process variable.
1995c; Vega-Mercado and others 1996a, 1996b; Qin and others Pulse current waveform. Pulse current should have a
1998; Castro and others 1993). waveform very similar to that of the voltage waveform, different
High intensive pulsed electric field treatments produce a se by a ratio, the load resistance. In the case of a partial breakdown,
ries of degradative changes in blood, algae, bacteria and yeast the ratio changes. A shunt resistor or a current monitor, such as a
cells (Castro and others 1993). The changes include electropora Pearson Coil, together with an oscilloscope may be used to mea
tion and disruption of semipermeable membranes which lead to sure the current waveform.
cell swelling and/ or shrinking, and finally to lysis of the cell. The Pulse duration time is determined from the voltage wave
mechanisms for the inactivation of microorganisms include elec form.
tric breakdown, ionic punch-through effect, and electroporation Pulse repetition rate.
of cell membranes (Qin and others 1994). The inactivation of mi Voltage waveform, current waveform, duration time, and
croorganisms is caused mainly by an increase in their membrane repetition rate may be logged by a computerized oscilloscope
permeability due to compression and poration (Vega-Mercado system.
and others 1996b). Temperatures at the inlet and outlet of each treatment
Castro and others (1993) reported a 5-log reduction in bacte chamber should be monitored. A Resistive Temperature Device
ria, yeast, and mold counts suspended in milk, yogurt, orange (RTD) may be used on-line for such monitors. Temperature data
juice and liquid egg treated with PEE Zhang and others (1995a) may be used to estimate the energy delivery to the PEF chamber.
achieved a 9-log reduction in E. coli suspended in simulated milk Flow rate should be monitored because it determines the
ultrafiltrate (SMUF) and treated with PEF by applying a con resident time within a treatment chamber, allowing the number
verged electric field strength of 70 KV/ cm and a short treatment of pulses applied to be determined.
time of 160 .s. This processing condition is adequate for com- In some continuous PEF processing systems, pressure should

Supplement-.JOURN1'L OF FOOD SCIBNCB 75

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
also be monitored. An on-line pressure transmittor may be used required processing conditions, optimization of the process has
for this purpose. to be performed.

4.3. Microbial Surrogates 6. Research Needs

Currently, there is no information on the use of surrogate mi Despite significant developments in PEF technologies in the
croorganisms as indicators of pathogenic bacteria when PEF is 1990s several areas need further research before the technology
used as a processing method. Selection of surrogates will require is applied commercially. These include:
the prior identification of the microorganism of concern in a spe Confirming the mechanisms of microbial and enzyme in
cific food and PEF system. In PEP, as with other inactivation activation.
methods, the potential for injury and recovery exists. Experts Identification of the pathogens of concern most resistant
should consider this possibility and choose the appropriate mi to PER
crobial enumeration methods. The selection of the appropriate Identification of surrogate microorganisms for the patho
surrogate(s) will depend on the type of food, microflora, and pro gens of concern.
cess conditions (that is, electric field intensity, number of pulses, Development of validation methods to ensure microbio
treatment time, pulse wave) apd should also follow the general logical effectiveness.
guidelines listed in the Overarching Principles. Development and evaluation of kinetic models that take
S. cerevisiae and Candida spp. are 2 microorganisms of particu into consideration the critical factors influencing inactivation.
lar relevance in spoilage of foods. Although their inactivation has Studies to optimize and control critical process factors.
been proven in many food models and foods, their susceptibility Standardization and development of effective methods
to PEF may prevent their use as a surrogate. for monitoring consistent delivery of a specified treatment.
Treatment chamber design uniformity and processing ca
5. Process Deviations pacity.
Identification and application of electrode materials for
5.1. Methods for Determining Process Deviations longer operation time and lower metal migration.
Continuous monitoring of storage temperatures, pH, color, Process system design, evaluation, and cost reduction.
and acidity of PEP-treated and -untreated products will indicate
any deviation of products from their standardized conditions. A GIOS&U')'
data acquisition system is needed to monitor the number of A, COMPLETE LIST OF DEFINITIONS REGARDING ALL THE TECH
pulses and the frequency applied to the food products. A digital flnologies is located at the end of this document.
oscilloscope is required to monitor the wave shape and the peak
electric field. To ensure desirable temperature during PEF pro Batch or static chamber. Chamber that treats a static mass of
cessing of foods, digital thermocouples or fiber optic probes must food in bulk or packaged. A chamber that processes a limited vol
be used to record the temperature the entrance and exit of the ume of food at one time.
PEF treatment chamber. Breakdown. Rupture of bacterial cell membranes with the ap
plication of an electric field
5.2. Methods to Assess Deviation Severity Capacitor bank. Network of 2 or more capacitors used to store
the energy supply from a DC power source.
5.2.1.Temperature sensors Co field flow. One possible configuration for a PEF continuous
Temperature sensors such as thermocouples are connected chamber
from the tubing at the entrance and exit of the PEF treatment DC power supply. Electric device to deliver direct current to
chamber. A continuous recording of temperature will avoid un the capacitor bank.
desirable temperature increases caused by overheating treat Continuous chamber. Opposite to batch chamber, it process
ment electrodes inside the chamber. es liquid foods that are pumped between pulsing electrodes.
Electric field intensity or strength Average voltage (kV) divid
5.2.2. Data acquisition system ed by the distance between 2 electrodes (cm).
A computer with data acquisition systems will monitor the en Electrical breakdown. An abrupt rise in electric current in the
tire system. Continuous recording of the number of pulses and presence of a small increase in voltage. As a consequence, rup
frequencies will correct such deviations caused by malfunction ture of bacterial cell membranes may occur with the application
of the high voltage power supply, which may lead to underpro of an electric field. This effect is more pronounced in pulsed elec
cessed product. tric field treatment. In microwaves, this can happen if operating
at very low pressures, as in freeze-drying.
5.2.3. Automatic shut down Electrical conductivity. Physical property of a food material
Aborting the pulser automatically from the computer will avoid that determines its ability to conduct electricity, expressed in Sie
damage to the chamber and electrode due to arcing. If there is no mens per cm (Siem).
product leakage, the equipment can be restarted and the product Electroporation. Destabilization of the lipid bilayer and pro
can be reprocessed. Otherwise, it has to be discarded. teins of cell membranes, as well as the formation of pores in
duced when a microbial cell is temporarily exposed to high volt
5.2.4. Sample deviation age electric field pulses.
Mille is a fluid containing proteins and minerals, such as calci Electrode gap. Distance (cm) between the inner and outer
um, iron, and magnesium, that are very likely to cause fouling on electrode inside PEF treatment chambers.
the electrode surface during PEF treatment. If the milk has a Input voltage. Voltage (kV) supplied from a DC power source.
high level of microorganisms, this film may serve as a good sub Irreversible breakdown. Irreversible generation of pores in
strate for microorganisms to reproduce and form a biofilm in the the bacterial cell membranes.
treatment chamber. Therefore, the efficiency of the pulser is low Peak voltage. Maximum voltage (kV) delivered by PEF sys
er and the milk will receive fewer pulses due to the clotting on tem.
the electrodes. To resolve this situation, and in order to attain the Pulse width or time constant. Duration of the pulse. For an

76 JOURNAL. OF FOOD SCIBNCB-Supplement

Pulsed lectrlc Fields . . .
exponential decaying pulse, the resistance of the food times the 85:856-860.
Mittal, G. S. and Choundry, M. 1997. Pulsed electric field sterilization of waste brine solu
capacitor capacitance gives a measure of the pulse width. tion. Proceedings of the Seventh International Congress on Engineering and Food. Brigh
Pulse rate. Numberofpulses per s or input frequency (1/s). ton Center, UK. Cl3-Cl6.
Mizuno, A. and Hori, Y. 1991. Destruction of living cells by pulsed high-voltage application.
Reversible breakdown. Formation of reversible pores in the IEEE Trans Ind Appl. 24(3):387-394.
bacterial cell membranes. Pagan, R., Esplugas, S., Gongora-Nieto, M. M .. Barbosa-Canovas, G. V. and Swanson, B. G.
1998. Inactivation of Bacillus subtilis spores using high intensity pulsed electric fields in
Treabnent time. The product of the number of pulses and the combination with other food conservation technologies. Food Scie Technol Int. 4(1 ):33
duration of the pulses, usually expressed in microseconds (s). 44.
Peleg, M. 1995. A model of microbial survival after exposure to pulse electric fields. J Sci
Waveform/Waveshape. Type of electric pulses generated by Food Agric. 67(1):93-99.
the high-voltage pulser. Pothakamury, U. R., Monsalve-Gonzalez, A., Barbosa-Canovas, G. V. and Swanson, B. G.
1995. Inactivation of Escherichia coli and Staphylococcus aureus in model foods by
pulsed electric field technology. Food Res Int. 28(2):167-171.
References Pothakamury, U. R. 1995. High voltage pulsed electric field inactivation of Bacillus subtilis
Barbosa-Canovas, G. V., Gongora-Nieto, M. M., Pothakamury, U. R., Swanson, B. G. 1999. and Lactobacillus delbrueckii. Rev Esp CT. 35(1):101-!07.
Preservation of foods with pulsed electric fields. 1-9, 76-107, 108-155. Academic Press Ltd. Pothakamury, U. R., Vega, H., Zhang, Q. H., Barbosa-Canovas, G. V. and Swanson, B. G. 1996.
London. Effect of growth stage and processing temperature on the inactivation ofE. coli by pulsed
electric fields. I Food Protect. 59(11):1167-1171.
Calderon-Miranda, M. L. 1998. Inactivation of listeria inocua by pulsed electric fields and
nisin. Pullman, WA. Washington State University. Qin, B. L., Zhang, Q., Barbosa-Canovas, G. V., Swanson, B. G. and Pedrow, P. D. 1994. Inac
Castro, A. J., Barbosa-Canovas, G. V. and Swanson, B. G. 1993. Microbial inactivation of foods tivation of microorganisms by pulsed electric fields with different voltage waveforms.
IEEE Trans Dielec Insul. 1(6):1047-1057.
by pulsed electric fields. J Food Process Pres. 17:47-73.
Qin, B.-L., Chang, F.-J., Barbosa-Canovas, G. V. and Swanson, B. G. 1995a. Nonthermal inac
Castro, A. J. 1994. Pulsed electrical field modification ofactivity and denaturation ofalkaline
phosphatase. Food Science and Human Nutrition. Pullman, WA. Washington State Uni tivation ofS. cerevisiae in apple juice using pulsed electric fields. Lebensm Wiss Technol.
28(6):564-568.
versity.
Qin, B., Pothakamury, U. R., Vega, H., Martin, 0., Barbosa-Canovas, G. V. and Swanson, B. G.
Dunn, J.E. and Pearlman, J. S. 1987. Methods and apparatus for extending the shelf-life of
fluid food products. Maxwell Laboratories, Inc. U.S. Patent 4,695,472. 1995b. Food pasteurization using high intensity pulsed electric fields. J Food Technol.
Dunn, J. 1996. Pulsed light and pulsed electric field for foods and eggs. Poul Sci. 75(9):1133 49(12):55-60.
1136. Qin, B.-L., Zhang, Q. H., Barbosa-Canovas, G. V., Swanson, B. G. and Pedrow, P. D. 1995c.
Dunne. C. P., Dunn, J., Clark, W., Ott, T. and Bushnell.A. H. 1996.Application of high energy Pulsed electric field treatment chamber design for liquid food pasteurization using a
electr1c field pulses to preservation of foods for combat rations. Science and Technology finite element method. Transactions of the ASAE. 38(2):557-565.
for Force XXI. Department of the Army. Norfolk, Virginia. June 24-27. 7. Qin, B.-L., Barbosa-Canovas, G. V., Swanson, B. G. and Pedrow, P. D. 1998. Inactivating mi
EPRI. 1998. Pulsed electric field processing in the food industry: a status report on PEF. Palo croorganism using a pulsed electric field continuous treatment system. IEEE Trans Indus
Alto, CA. Industrial and Agricultural Technologies and Services. CR-109742. Applic. 34(1):43-49.
Fernandez-Molina, J. J., Barkstrom, E., Torstensson, P., Barbosa-Canovas, G. V. and Swanson, Quass, D. W. 1997. Pulsed electric field processing in the food industry. A status report on
B. G. 1999. Shelf-life extension of raw skim milk by combining heat and pulsed electric PEF. Palo Alto, CA. Electric Power Research Institute. CR-109742.
fields. Food Res Int. Qui, X.. Jia. M., Sharma, S., Tuhela, L. and Zhang, Q. H. 1998. An integrated PEF pilot plant
Gaskova, D., Sigler, K., Janderova, B. and Plasek, J. 1996. Effeckofhigh-voltage electric pulses for continuous nonthermal pasteurization of fresh orange juice. American Society of
Agricultural Engineers. 41(4):1069-1074.
on yeast cells: Factors influencing the killing efficiency. Bioelectrochem Bioenergetics.
39: 195-202. Raso, J., Calderon, M. L., Gongora, M., Barbosa-Canovas, G. V. and Swanson, B. G. 1998.
Grahl, T., Sitzmann, W. and Marki, H. 1992. Killing of microorganisms in fluid media by high Inactivation of Zygosaccharomyces Bailii in fruit juices by heat, high hydrostatic pressure
voltage pulses. DECHEMA Biotechnology Conferences. 675-679. and pulsed electric fields. J Food Sci. 63(6):1042-1044.
Grahl, T. and Maerkl, H. 1996. Killing of microorganisms by pulsed electric fields. Applied Reina, L. D., Jin, Z. T., Yousef, A. E. and Zhang, Q. H. 1998. Inactivation of Listeria monocy
MicrobioJBiotechnol. 45(1/2):148-157. togenes in milk by pulsed electric field. I Food Protect. 61(9):1203-1206.
Gupta, R. P. and Murtay, W. 1988. Pulsed high electric field sterilization. IEEE Pulsed Power Sale, A. J. H. and Hamilton, W. A. 1967. Effects of high electric fields on microorganisms I.
Conf. Record. National Research Council. 58-64. Killing of bacteria and yeast. Biochimt Biophys Acta. 148:781-788.
Ho, S. Y., G.S., M., Cross, J. D. and Griffiths, M. W. 1995. Inactivation of Pseudomonas Schoen~ach, K. H., f'.eter~n. F. E., Alden, _R. W. and Beebe, S. J. 1997. The effect of pulsed
fluorescens by high voltage electric pulses. I Food Sci. 60(6): 1337-1343. electric fields on b10Iogical cells: Experiments and applications. IEEE Trans Plasma Sci.
25(2):284-292.
Ho, S. Y., Mittal, G. S. and Cross, J. D. 1997. Effects of high field electric pulses on the activity
of selected enzymes. I Food Eng. 31(1):69-84. Sensoy, I., Zhang, Q. H. and Sastry, S. K. 1997. Inactivation kinetics of Salmonella dublin by
Ho, S. Y. and Mittal, G. S. 1997. Analysis of2 high voltage electric pulse systems for batch and pulsed electric field. J Food Process Eng. 20:367-381.
continuous pasteurization of selected food products. Universty of Guelph. confidential. Simpson, M. V., Barbosa-Canovas, G. V. and Swanson, B. G. 1995. The Combined inhibitory
Hillsheger, H. and Nieman, E. G. 1980. Lethal effect of high-voltage pulses one. coli K12. effect oflysozyme and high voltage pulsed electric fields on the growth ofBaclllus subtilis
Radiat Environ Biophys 18(4):281-8. spores. !FT Annual Meeting: Book of Abstracts. 267.
Hillsheger, H .. Pottel, J. and Niemann, E.G. 1981. Killing of bacteria with electric pulses of Sitzmann, V. 1995. High voltage pulse techniques for food preservation. G. W. Gould. New
high field strength. Radiat Environ Biophys. 20:53-65. methods for food preservation. London, UK. Blackie Academic and Professional. 236-252.
Hillsheger, H., Pottel, J. and Niemann, E.G. 1983. Electric field effects on bacteria and yeast Tsang, T. Y. 1990. Electrical modulation of membrane proteins: Enforced conformational
cells. Radial Environ Biophys. 22: 149-162. oscillations and biological energy signals. Annu Rev Biophys Chem. 19:83-!06.
Jacob, H. E., Forster, W. and Berg, H. 1981. Microbial implications of electric field effects. II. Vega-Mercado, H., Powers, J. R., Barbosa-Canovas, G. V. and Swanson, B. G. 1995. Plasmin
Inactivation of yeast cells and repair of their cell envelope. Z. Alig. Microbial 21 (3) :225-232. inactivation with pulsed electric fields. J Food Sci. 60(5):1143-1146.
Jayaram, S., Castle, G. S. P. and Margaritis, A. 1992. Kinetics of sterilization of Lactobaclllus Vega-Mercado, H .. Martin-Belloso, 0., Chang, F.-J.. Barbosa-Canovas, G. V. and Swanson, B.
brevis cells by the application of high voltage pulses. Biotechnol Bioeng. 40(11): 1412-1420. G. 1996a. Inactivation of Escherichia coli and Bacillus subtilis suspended in pea soup using
Jeyarnkondan, S., Jayas, D.S. and Holley, R. A. 1999. Pulsed electric field processing offoods: pulsed electric fields. I Food Process Preserv. 20(6):501-5!0.
a review. I Food Protect. 62(9):1088-1096. Vega-Mercado, H., Pothakamury, U. R., Chang, F.-J., Barbosa-Canovas, G. V. and Swanson, B.
Ke_ith, W. D., Harris, L. J., Hudson, L. and Griffiths, M. 1997. Pulsed electric fields as a process G. 1996b. Inactivation of Escherichia coli by combining pH, ionic strength and pulsed
mg alternative for microbial reduction in spice. Food Res Int. 30(3/4):185-191 electric fields hurdles. Food Res Int. 29(2):117-121.
Kinosita, K. J. and Tsang, T. Y. 1977. Voltage induced pore formation and haemolysis eryth Vega-Mercado, H. 1996c. Inactivation of proteolytic enzymes and selected microorganisms
rocytes. Biochim BiophysActa. 471:227-242. in foods using pulsed electric fields. Biological Systems Engineering. Pullman, WA. Wash
Kinoslta, K. I. and Tsang, T. Y. 1979. Voltage-induced conductance in human erythrocyte ington State University.
membranes. Biochim BlophysActa. 554:479-497. Vega-Mercado, H., Martin-Belloso, 0., Qin, B.-L., Chang, F.-J., Gongora-Nieto, M. M., Bar
Knorr, D.. Geulen, M .. Grahl, T. and Sitzmann, W. 1994. Food application of high electric bosa-Canovas, G. V. and Swanson, B. G. 1997. Non-thermal food preservation: pulsed
field pulses. Trends Food Sci Technol. 5:71-75. electric fields. Trends Food Sci Technol. 8(5):151-157.
Liu,X., Yous~f. A. E. and ~hism, G. W. 1997. Inactivation of Escherichia coli Ol57:H7 by the Vega-Mercado, H., Gongora-Nieto, M. M., Barbosa-Canovas, G. V. and Swanson, B. G. 1999.
combmat1on of organic acids and pulsed electric field. J Food Safety. 16(4):287-299. Nonthermal preservation of liquid foods using pulsed electric fields. Handbook of Food
Love, P. 1998. Correlation offourier transforms of pulsed electric field waveform and micro Preservation. M. S. Rahman. Marcel Dekker, Inc. New York.
organism inactivation. IEEE Transactions on Dielectrics and Electrical Insulation. 5(1 ): 142 Yin, Y., Zhang, Q. H. and Sastry, S. K. 1997. High voltage pulsed electric field treatment
147. chambers for the preservation of liquid food products. Ohio State University. US Patent
5,690,978.
Lublcki, P. and Jayaram, S. 1997. High voltage pulse application for the destruction of the
Gram.negative bacterium Yersinia enterocolitica. Bioelectrochemistry and Bioenergetics. Zhang, Q. H .. Monsalve-Gonzalez, A., Barbosa-Canovas, G. V. and Swanson, B. G. 1994a.
43:135-141. Inactivation ofE. coli and S. cerevisiae by pulsed electric fields under controlled temper
Ma, L., Chang, F. J. and Barbosa-Ca.novas, G. V. 1997. Inactivation ofE. coli in liquid whole ature conditions. Transactions of the ASAE. 37(2):581-587.
~ggs using pulsed electric fields technologies. New frontiers in food engineering. Proceed Zhang, Q. H., Chang, F.-J. and Barbosa-Canovas, G. V. 1994b. Inactivation of microorganisms
mgs of the Fifth Conference of Food Engineering. American Institute of Chemical Engi in a semisolid model food using high voltage pulsed electric fields. Lebensm Wiss Technol.
neers. 216-221. 27(6):538-543.
Marquez, V. 0., Mittal, G. S. and Griffiths, M. W. 1997. Destruction and inhibition of bacterial Zhang, Q. H., Qin, B.-L., Barbosa-Canovas, G. V. and Swanson, B. G. 1995a. Inactivation of
spores by high voltage pulsed electric field. I Food Sci. 62(2):399-401,409. E. coli for food pasteurization by high-strength pulsed electric fields. J Food Process
Martin-Belloso, 0., Vega-Mercado, H., Qin, B.-L., Chang, F.-J., Barbosa-Canovas, G. V. and Preserv. 19(2):103-118.
Swanson, B. G. 1997a. Inactivation ofEscherichia coli suspended in liquid egg using pulsed Zhang, Q. H., Barbosa-Ca.novas, G. V. and Swanson, B. G. 1995b. Engineering aspects of
electric fields. I Food Process Preserv. 21(3):193-208. pulsed electric field pasteurization. J Food Eng. 25(2):261-281.
Martin-Belloso, 0., Qin, B. L., Chang, F. J., Barbosa-Canovas, G. V. and Swanson, B. 1997b. Zhang, Q. H., Qiu, X. and Sharma, S. K. 1997. Recent development In pulsed electric field
Inactivation ofEscherichia coli in skim milk by high intensity pulsed electric fields. J Food processing. Washington, DC. National Food Processors Association. New Technologies
Process Eng. 20:317-336. Yearbook. 31-42.
Matsumoto, Y.. Satake, T.. Shioji, N. and Sakuma.A. 1991. Inactivation of microorganisms by Zimmermann, U. and Benz, R. 1980. Dependence of the electrical breakdown voltage on the
pulsed high voltage applications. Conference Record of IEEE Industrial Applications charging time in Valonia utricularis. I Membrane Biol. 53:33-43.
Society Annual Meeting. 652-659. Zimmermann, U. 1986. Electrical breakdown, electropermeabilization and electrofusion.
Miller, J. F., Dower, W. J. and Tompkins, L. S. 1988. High-voltage electroporation of bacteria: Rev Physiol Biochem Pharmacol. !05:175-256.
Genetic transformation of Camylobacter jejuni with plasmid DNA. Proc Natl Acad Sci.

Supplement-JOURNAL OP FOOD SCIENCE 77

JFS SUPPLEMENT: Kinetics of Microbial lnadlvatlon for ~lternatlve f'ood ProceHlng Technologies
Appendix Continuous PEF Chambers
Continuous PEF treatment chambers are suitable for large
PEF Treatment Chambers scale operations and are more efficient than static chambers.
a) Continuous chamber with ion conductive membrane. One
Static Chambers design by Dunn and Pearlman (1987) consists of 2 parallel plate
a) U-shaped polystyrene. This model consists of 2 carbon electrodes and a dielectric spacer insulator (Fig. 11). The elec
electrodes supported on brass blocks placed in a U-shape poly trodes are separated from the food by conductive membranes
styrene spacer (Fig.7). Different spacers regulate the electrode made of sulfonated polystyrene and acrylic acid copolymers. An
area and amount of food to be treated. The brass blocks are pro electrolyte is used to facilitate electrical conduction between
vided with jackets for water recirculation and controlling temper electrodes and ion permeable membranes. Another continuous
ature of the food during PEF treatment. This chamber could sup chamber described by Dunn and Pearlman (1987) is composed
port a maximum electric field of30 kV/cm. A second chamber of electrode reservoir zones instead of electrode plates (Fig. 12).
model designed by Dunn and Pearlman (1987) consists of 2 Dielectric spacer insulators that have slot-like openings (orifices)
stainless steel electrodes and a cylindrical nylon spacer. The
chamber is 2-cm high with an inner diameter of 10 cm, electrode
area of 78 cm2 and stainless steel electrodes polished to mirror
surfaces (Fig. 8). Another model (Barbosa-Canovas and others
1999) consists of 2 round-edged, disk-shaped stainless steel
electrodes (Fig. 9). Polysulfone or Plexiglas was used as insula
tion material. The effective electrode area is 27 cm2 and the gap
between electrodes can be selected at either 0.95 or 0.5 cm. The
chamber can support 70 kV I cm. Circulating water at pre-selected
temperatures though jackets built into electrodes provides cool
ing of the chamber.
b) Glass coll static chamber. A model proposed by Lubicki and
Jayaram (1997) uses a glass coil surrounding the anode (Fig. 10).
The volume of the chamber was 20 cm3, which requires a filling
liquid with high conductivity and similar permittivity to the sam
ple (media NaCl solution, s = 0.8 to 1.3 S/m, filling liquid water
10-3 Sim) used because there is no inactivation with a non-con
ductive medium (that is, transformer silicon oil).

Pig, I-Cron-section of PIIP' static treatment ohllmbar

78 JOURNAL. Of' POOO 5CIEMCE-Supplement

-
l'lg, 1a-Contlnuous traatment ohllmbar with electrode reMrvolr
Pulsed Electric f'lelds . . .
between which the electric field concentrates and liquid food are c) Enhanced electric continuous field treattnent chambers. Ym
introduced under high pressure. The average residence time in and others (1997) applied the concept of enhanced electric fields
each of these 2 reservoirs is less than l min. in the treatment zones by development of a continuous co-field
b) Continuous PEF chamber with baffles. This design con flow PEF chamber (Fig. 14) with conical insulator shapes to elimi
sists of 2 stainless steel disk-shaped electrodes separated from nate gas deposits within the treatment volume. The conical re
the chamber by a polysulfone spacer (Fig. 13). The operating gions were designed so that the voltage across the treatment zone
conditions of this chamber are: chamber volume, 20 or 8 ml; elec could be almost equal to the supplied voltage. Other configura
trode gap, 0.95 or 0.51 cm; flow rate, 1200 or 6 ml/min (Barbosa tions with enhanced electric fields are illustrated in Fig. 15 and 16.
Canovas and others 1999). In these designs the flow chamber can have several cross-section
geometries that may be uniform or non-uniform. In this type of
chamber configuration, the first electrode flow chamber, the insu
lator flow chamber, the second electrode flow chamber, the con
ducting insert members, and the insulating insert members are
formed and configured such that the electrode flow chamber and
insulator flow chamber form a single tubular flow chamber though
the PEF treatment device (Barbosa-Canovas and others 1999).
d) Coaxial continuous PEF chambers. Coaxial chambers are
basically composed of an inner cylinder surrounded by an outer
annular cylindrical electrode that allows food to flow between
them. Fig. 17 illustrates such a coaxial chamber. A protruded out
er electrode surface enhances the electric field within the treat
ment zones and reduces the field intensity in the remaining por
tion of the chamber. The electrode configuration was obtained
by optimizing the electrode design with a numerical electric field
computation. Using the optimized electrode shape, a prescribed
field distribution along the fluid path without an electric field
enhancement point was determined. This treatment chamber
has been used successfully in the inactivation of pathogenic and
non-pathogenic bacteria, molds, yeasts, and enzymes present in
liquid foods such as fruit juices, milk, and liquid whole eggs (Bar
bosa-Canovas and others 1999).

Pig. 18-Treabnent chamber with dltfeNnt electrode 11-metrlea

and enllllwd electrlc tlelda In the lnaulator channel Pig. 17-CroM-NCtlonal view of coullll .._.....nt olNunNr
Supplement-JOURNAL. OP f'OOD 6Cl8NCB 79
.JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

High Voltage Arc Discharge

GUSTAVO V. BARBOSA-CANOVAS, Q. HOWARD ZHANG, MERLE D. PIERSON, AND DONALD W. SCHAFFNER

Scope of Deliverables: This section covers early applications of electricity to pasteurize fluids. The use of arc
discharge for liquid foods is unsuitable largely because electrolysis and the formation of highly reactive chemicals
occur during the discharge. More recent designs show some promise for this technology, although this should be
confirmed by independent researchers.

1. Definition, Description and Applications lethal effect of electrical discharges on microorganisms suspend

H IGH VOLTAGE ARC DISCHARGE IS A METHOD TO PASTEURIZE

liquid foods by applying rapid discharge voltages through
an electrode gap below the surface of aqueous suspensions of
ed in milk when applied voltage used to treat food was increased
from 3000 V to 4000 V.
Gilliland and Speck (1967b) used a double tank system to
microorganisms. Inactivation of microorganisms and enzymes study the mechanical and thermal effects of shock waves sepa
contained in food products by electrical discharges began in the rately. The high voltage discharge occurred in the lower chamber
1920s with the electropure process for milk. This process consist and was separated from the bacterial suspension in the upper
ed of passing an electrical current through carbon electrodes and chamber by a rubber diaphragm. Both chambers were complete
heating milk to 70 c to inactivate Mycobacterium tuberculosis ly filled to obtain the full effect of pressure pulses. No significant
and Escherichia coli (Barbosa-Canovas and others 1999). It was inactivation or metabolic injury was observed, indicating that
one of the first electrical techniques used by the food industry to mechanical action alone was not responsible for the bactericidal
pasteurize milk (Palaniappan and others 1990). When rapid high action. No significant amount of cell breakage was observed by
voltages are discharged through liquids, a multitude of physical phase microscopy and cell wall stain preparations. Other studies
effects (intense waves) and chemical compounds (electrolysis) by the same authors (Gilliland and Speck 1967a) suggest that
are generated, referred to as electrohydraulic shock, which inac there are no thermal effects, since more than 90% of the popula
tivate the microorganisms (Edebo and Selin 1968). Enzymes are tion was killed within 10 discharges, when the increase in tem
also inactivated by high voltage arc discharges. Inactivation is at perature was only 0.5 C. Sytnik and Sytnik (1976) reported inac
tributed to oxidation reactions mediated by free radicals and tivation of the yeasts Candida utilis, C. guilliermondii, and Saccha
atomic oxygen. There is no significant temperature increase dur romyces cerevisiae in foods using a high voltage DC by employing
ing treatment by arc discharge. The major drawbacks of this elec 40 kV and 50 electrical discharges. They concluded that the
trical method, however, are contamination of the treated food by chemical reactions were the major contributors to bacterial inac
chemical products of electrolysis and disintegration of food parti tivation by electrohydraulic shock, and that thermal effects were
des by shock waves (Barbosa-Canovas and others 1999). The insignificant, since the temperature rise reported in many stud
method based on continuous high voltage arc discharges was not ies was only a few degrees.
considered suitable for use in the food industry (Dunn and According to FABCO Technologies (FABCO Technologies
Pearlman 1987; Jayaram and others 1991). More recent designs 1998). submerged electrical-arc technology may be an alterna
show some potential; however, chemical reaction products need tive to heat pasteurization of liquid foods, but these claims
to be identified and results validated. need to be validated independently. Recent experiments were
reported to achieve a 5- to 7-log reduction of pathogenic bac
teria in inoculated orange juice without affecting taste or color
2. Inactivation of Microorganisms (FABCO Technologies 1998). This company reported that their
ALLEN (1969) DISCLOSED AN ELECTROHYDRAULIC PROCESS arc discharge commercial-scale system reduced total microbial
.l'l.for producing microbial antigens. In this U.S. patent, he test plate counts in fresh-squeezed grapefruit juice by more than
ed his electrohydraulic process with E. coli ATCC 11229 suspend 50 percent, boosting refrigeration shelf-life and fresh flavor to
ed in O.OlM phosphate buffer of pH 7.2. After 200 shocks of 182 more than 100 d. Endotoxins and target microorganisms such
J/discharge to a spark gap of 1.6 mm at 4.5 kV, a 6-log reduction as Listeria monocytogenes, Clostridium sporogenes, Salmonella
was observed in a 1.2-liter volume of the static treatment cham Typhimurium, Lactobacillus lactis, E.coli 0157:H7, Aspergillus
ber. niger, and Penicillum digitatum were tested in citrus juices us
Another study provided critical operational conditions such ing the electric pulsed power, reportedly achieving 5- to 7-log
as the stored electrical energy for each discharge in the range of microbial and endotoxin reductions (FABCO Technologies
2500 to 22000 J; electric current of at least 1500 A; and time of dis 1998). The process was also reported to achieved 6- to 7-log re
charge of Jess than 1 millisecond, preferably of 50 to 300 micro ductions of pathogenic bacteria in milk. Their process con
seconds (Wesley 1971). The study did not provide microbial test sumes little energy compared to thermal pasteurization of
data. juices and was reportedly to be more energy efficient than
Gilliland and Speck (1967a) found electrohydraulic treatment other non-thermal processes (that is, high pressure and pulse
to be effective in inactivating at least 95% of the vegetative cells electrical fields) with juice-processing potential. The process
of E.coli, Enterococcusfaecalis, Micrococcus radiodurans, Bacillus was reported to have the potential to disinfect process water.
subtilis, and its spores. High voltage electrical impulses were dis It must be noted that there has been no other publication on
charged at a rate of 1/s. E. faecalis and E. coli were less resistant, the effectiveness of this process. Results reported by FABCO
whereas M. radiodurans and B. subtilis were more resistant to Technologies should be independently validated by other re
electrohydraulic shock. Beattie and Lewis (1925) demonstrated a searchers.

80 JOURNAL. Of' FOOD 8C1BNCB-Supplement

 3. Mechanism of Microbial Inactivation 5. Research Needs

I N THE EARLY LITERATURE (ALLEN 1969; WESLEY 1971; SYINIK AND

Sytnik 1976) the inactivation of microorganisms by high volt
age arc discharge was reported to be related to the hydraulic
E ARLY LITERATURE ATTEMPTED TO EXPLAIN THE PHENOMENON
of microbial inactivation, and it was concluded that the hy
draulic wave, that is, pressure, did not contribute to the bacteri
shock wave generated by an electrical arc. More recent litera cidal effect. A more recent development (FABCO Technologies
ture concluded that arc discharge prompted the formation of 1998) focuses on the delivery of the treatment to the product
highly reactive free radicals from chemical species in foods, while flowing through an arc plasma chamber. Oxygenation is a
such as oxygen (Gilland and Speck 1967b; Vega-Mercado and critical part of the process since the submerged arc discharge ac
others 1999). These free radicals are toxic compounds that tually takes place within the gas bubbles. This partial breakdown
serve to inactivate certain Intracellular components required of gas causes ionization, resulting in reactive ozone and UV radi
for cellular metabolism. Gilliland and Speck (1967b) found that ation. In this regard, some research needs include:
lactic dehydrogenase, trypsin, and proteinases of B. subtilis Understanding how delivery of highly reactive ozone and
were inactivated by electrohydraulic shock. They concluded UV radiation by electric arc discharge inactivates microorgan
that the enzyme inactivation was due to free radical oxidation isms.
reactions. Quantifying the inactivation kinetics and mechanisms.
Palaniappan and Sastry (1990) presented an extensive liter Identifying reaction process products generated during
ature review on the effect of electrohydraulic shock on the inac the submerged arc discharge process due to the highly reactive
tivation of microorganisms. They reported that bacterial inacti nature of ozone and UV radiation.
vation was not due to heating, but mainly to irreversible loss of Defining maximum allowable dose, in a manner similar to
membrane function as a semipermeable barrier between the food irradiation.
bacterial cell and the environment and to the formation of toxic
compounds (oxygen radicals and other oxidizing compounds). Glossary
In their review, it was concluded that chemical action is a com Electrohydraulic treatment. A rapid discharge of high voltage
plex effect and depends not only on the voltage applied but electricity across an electrode gap below the surface of aqueous
also on the type of microorganism, initial concentration of cells, suspensions.
volume of the medium used, distribution of chemical radicals, High voltage electrical impulse. Application of high voltage
and electrode material (Palaniappan and Sastry 1990). Mem discharges to a liquid medium in a very short time.
brane damage was demonstrated by the lysis of protoplasts,
leakage of intracellular contents, the loss of the ability of E. coli References
to plasmolyze in a hypertonic medium, and the release of galac Allen, M. 1969. Electrohydraulic process for producing antigens. U.S. Patent 3,445,566.
Barbosa-Canovas, G. V., Gongora-Nieto, M. M., Pothalcamury, U. R. and Swanson, B. G. 1999.
tosidase activity in a permease-negative mutant of E. coli (Sale Preservation of foods with pulsed electric fields. Academic Press Ltd. London.
Beattie, M. and Lewis, F. C. 1925. The electric current (apart from the heat generated) A
and Hamilton 1967). Along with this, the number of cells of Sta bacteriological agent in the sterilization of milk and other fluids. J Hyg. 24: 123.
phylococcus aureus destroyed by high voltage discharges corre Dunn, J.E. and Pearlman, J. S. 1987. Methods and apparatus for extending the shelf-life of
fluid food products. Maxwell Laboratories, Inc. U.S. Patent 4,695,472.
lated with the numbers that could not be converted to sphero Edebo, L., Selin, I. 1968. The effect of pressure shock-wave and some electrical quantities in
plasts. This result led to the conclusion that cell death was due the microbicidal effect of transient electric arcs in aqueous systems. J Gen Microbiol.
50:253-259.
to membrane damage. FABCO Technologies. 1998. PulsePower disinfects fresh juices, extends shelf-life. Food Eng.
10:47-50.
4. Validation/Critical Process Factors Fedorov, N. E. and Rogov, I.A. 1960. Bactericidal effects of electrical Impulses of high voltage
In milk. Dairy Sci Abstract. 25(8):312-318.

T HERE IS NOT ENOUGH INFORMATION IN THE LITERATURE TO

determine critical process factors and to devise ways to han
dle deviations. In this regard, the following is a list of process
Gilliland, S. E. and Speck, M. L. 1967a. Inactivation of microorganisms by electrohydraulic
shock. Appl Microbial. 15(5): 1031-1037.
Gilliland, S. E. and Speck, M. L. 1967b. Mechanism of the bactericidal action produced by
electrohydraulic shock. Appl Microbial. 15(5):1038-1044.
variables that should be considered: Jayaram, S., Castle, G. S. P. and Margaritis, A. 1991. Effects of high electric field pulses on
Lactobacillus brevis at elevated temperatures. IEEE Industry Appl Society Annual Meet
Discharge field should be higher than 25 kV I cm to initiate ing. 5:674-681.
breakdown of the gas phase. Palaniappan, S., Richter, E. R. and Sastry, S. K. 1990. Effects of electricity on microorganisms:
A review. I Food Process Preserv. 14:393-414.
Discharge energy should be high enough to generate a Rahman, M. S. 1999. Handbook of Food Preservation. New York. Marcel Dekker, Inc.
sufficient quantity of ozone and/or UV irradiation for microbial Sale, A. J. H. and Hamilton, W. A. 1967. Effects of high electric fields on microorganisms I.
Killing of bacteria and yeast. Biochimica et Biophysica Acta. 148:781-788.
inactivation to occur. Sytnik, I. A. and Sytnik, I. A. 1967. The influence of electrohydraulic effect on microorgan
Discharge repetition rate should be high enough to main isms. Tr Stavropolskogo sx In-ta. 13:514-522.
Vega-Mercado, H., Gongora-Nieto, M. M., Barbosa-Canovas, G. V. and Swanson, B. G. 1999.
tain a continuous ionization in the gas phase. Nonthermal preservation of liquid foods using pulsed electric fields. Handbook of Food
Product should be sufficiently aerated to maintain a con Preservation. M. S. Rahman. Marcel Dekker, Inc. New York.
Wesley, R.H. 1971. Bacteria destruction methods. USA3,594,115.
tinuous gas bubble phase and ionization.

Supplement-JOURNAL Of' FOOD 9CIBNCE 81

Jf'S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies

Pulsed Light Technology

GUSTAVO V. BARBOSA-CANOVAS, DONALD W. SCHAFFNER, MERLE D. PIERSON, AND Q. HOWARD ZHANG

Scope of Deliverables: Processes designed for the bacterial inactivation of foods and packages with pulsed light are
described here. Possible mechanisms of bacterial inactivation are also discussed as well as critical factors that
influence the efflclency ofthe process. Also, the need for future research ls addressed. Much ofthe information comes
from industry sources; therefore, independently conducted research ls needed to validate the effectiveness ofpulsed
light processes for food preservation.

1. Definition, Description and Applications itance of the generator was 6.4 nF and the source impedance,
when fired, was 6.25 Ohms.
P ULSED LIGHT JS A METHOD OF FOOD PRESERVATION THAT JN
volves the use of intense and short duration pulses ofbroad
spectrum "white light". The spectrum of light for pulsed light
The pulsed light process developed by PurePulse Technolo
gies Inc. utilizes flashes of intense broad-spectrum pulsed light
treatment includes wavelengths in the ultraviolet (UV) to the (BSPLJ to sterilize pharmaceuticals, medical devices, packaging,
near infrared region. The material to be treated is exposed to a and water. The spectrum closely mimics the spectrum of sunlight
least l pulse of light having an energy density in the range of at sea level with an important difference: The system delivers a
about 0.01 to 50 J/cm2 at the surface. A wavelength distribution spectrum 20,000 times more intense than sunlight at the earth's
such that at least 70% of the electromagnetic energy is within the surface during the pulse. The intense flashes of light are less
range from 170 to 2600 nm is used. The material to be sterilized is than l millisecond in duration. Several pulses can be delivered
exposed to at least l pulse oflight (typically l to 20 flashes per s) per s, creating sterilized material at a greater speed than conven
with a duration range from l .s to 0.1 s (Dunn and others 1991). tional processes. The efficacy of the process has been tested
For most applications, a few flashes applied in a fraction of a s against a broad range of microorganisms, including bacteria
provide a high level of microbial inactivation. (vegetative cells and spores), fungi, viruses, and protozoa
Pulsed light is produced using engineering technologies that (PurePulse Technologies Inc. 1999).
multiply power many fold. Accumulating electrical energy in an Figure 2 illustrates the treatment system. The basic electrical
energy storage capacitor over relatively long times (a fraction of a components are shown schematically in the upper portion of the
s) and releasing this storage energy to do work in a much shorter Figure. In the lower portion of the Figure, energy per unit time dia
time (millionths or thousandths of a s) magnifies the power ap grams are shown below the system components to emphasize the
plied. The result is a very high power during the duty cycle, with power magnification available through pulsed energy processing.
the expenditure of only moderate power consumption (Dunn The lamp unit consists of l or more inert gas lamps arranged
and others 1995). to illuminate the desired treatment area. A high voltage cable
The technology for using light pulses is applicable mainly in connects the lamps to the power unit. To flash the lamp, a high
sterilizing or reducing the microbial population on the surface of voltage, high-current pulse of electricity is applied. The high cur
packaging materials, transparent pharmaceutical products, or rent passing through the gas in the lamp causes it to emit an in
other surfaces (Dunn 1996). Usually, the packaging material tense pulse of light that lasts a few hundred microseconds. The
used in aseptic processing is sterilized with hydrogen peroxide, frequency of flashing is adjustable, allowing optimization of the
which may leave highly undesirable residues in the food or pack process in conjunction with any particular processing speed. Sys
age (Barbosa-Canovas and others 1997). Light pulses may be tems are normally designed for each application to provide flexi
used to reduce or eliminate the need for chemical disinfectants bility in the number oflamps, the flashing configuration, and the
and preservatives. Pulsed light may also be used to extend the
shelf-life or improve the quality of produce.
MacGregor and others (1998) described the power light

1~=
HlpY.........

source suitable for inactivation of microorganisms. The test as

sembly used for experiments consisted of a rectangular PVC
housing, a pulsed generator and associated switching and con Hlp-switdl

trolled circuitry as illustrated in Fig. l. Internally, the light source

was mounted 4-5 cm above the 2 sample holders, which were set
45 degrees to the horizontal. This arrangement permitted 2 petri
dish samples to be located at right angles and irradiated simulta
neously, with each sample receiving the same average exposure.
The light source employed was a Hearaeus Noble light XAP Se
ries that was constructed from a clear fused quartz tube filled l=I

with Xenon to pressure of 450 torr. The dimension of the tube

was 3 mm dia and 7.5 cm arc length. The tube had an enriched
light trigger along the length of the envelope and was capable of --1~1

being operated with an average power of about 100 W. The

pulsed generator was a single stage, inverting PFN Marx genera
tor, which was charged to 30 kV de. The generator was fired using Pig, 1-bperlmental facility tor blloterlal Inactivation uelng puleed
a trigatron via a high voltage auto transformer. The source capac- Hght generator

82 JOURMAL OF POOD SCIBMCB-Supplement

Pulsed Light Technology ...
flash rate. Lamps can be flashed simultaneously or sequentially. pergillus spp. spores were inactivated with intensities greater
A different system using pulsed UV light for microbial control than 2 J/cm2 (Dunn and others 1991).
has been patented in the United States (Lagunas-Solar and The inactivation of microorganisms on dry surfaces by pulsed
Pyne 1994). with patent pending in Chile. This technology uses light has been demonstrated using Salmonella Enteriditis ATCC
monochromatic excimer lamps at a wavelength of 247 nm rather 13076, E.coli 0157:H7, Salmonella Typhimirium ATCC 13312,
than the xenon flash tubes described above. This technology is Listeria monocytogenes ATCC 15314, and S. aureus ATCC 6539,
in commercial production in Chile and is being used on grapes among other microorganisms. Information of the initial inocula
exported to the United States. tion levels, though, is not available. The challenge studies are
initiated by first inoculating the surface to be treated with a uni
2. Inactivation of Microorganisms form layer of the test organism. This is accomplished by a spray
ULSED LIGHT PROVIDES SHELF-LIFE EXTENSION AND PRESER inoculation method developed for this application by PurePulse
P vation when used with a variety of foods. Because pulsed Technologies Inc. (PurePulse Technologies Inc. 1999). Once the
light applications are limited to the surfaces of products, most microbial layer is allowed to dry, it is exposed to treatment. Since
studies have tested the effectiveness of pulsed light on food or the exposure is less than 1 s, treatment is quantified by the lamp
packaging surfaces. For instance, the process was reported to be output expressed as "fluence", the time integrated light energy
effective to inactivate molds in a variety of baked goods and to per unit surface.
extend their shelf-lives (Dunn and others 1995). Similarly, The ability of pulsed light technology to sterilize liquids after
shrimp treated with pulsed light and stored under refrigeration filling in containers has been tested against a broad range of mi
for 7 d remained edible, while untreated shrimp showed extensive croorganisms (Table 1). At a Japanese Congress (PurePulse Tech
microbial degradation and were discolored, foul smelling, and not nologies Inc. 1999), Nissin Pharmaceutical presented a case
edible (Dunn and others 1995). More than 7-log cycles ofAspergil study on the effectiveness of pulsed light technology for achiev
lus niger spore inactivation resulted with a minimal number of ing sterility in liquids. Low-density polyethylene (IDPE) contain
pulsed light flashes with 1 J/cm2 (Dunn and others 1991). A vari ers were filled with 20% (w/v) glucose, physiological saline, or wa
ety of microorganisms including Escherichia coli, Staphylococcus ter for injection using blow/fill/seal technology (Table 1). Subse
aureus, Bacillus subtilis, and Saccharomyces cerevisiae have been quent to filling, samples were aseptically inoculated with the
inactivated by using 1 to 35 pulses of light with an intensity rang
ing from 1-2 J/cm2 as illustrated in Fig. 3, 4, and 5. Salmonella sero
vars were reduced by 2-log cycles on chicken wings in samples in
oculated with either 5 or 2 log/cm2. Listeria innocua was reported
to be reduced by 2-log cycles on hot dogs (inoculated with 3 or 5
log/wiener) after pulsed light treatment (Dunn and others 1995).
Curds of commercially dry cottage cheese inoculated with
Pseudomonas spp. and treated with pulsed light with an energy
density of 16 J/cm2 and pulse duration of0.5 ms reduced the mi
crobial population by 1.5-log cycles after 2 flashes. The tempera
ture at the surface of the curd increased by 5 C (Dunn and oth
ers 1991). Sensory evaluation with trained panelists showed no
effects of the treatment on the taste of the cheese. A combina
tion of high-pressure wash and exposure to pulsed light was re
ported to reduce the psychrotroph and coliform population on
the surface offish tissue by 3-log cycles. The sensory attributes
of the fish remained acceptable after 15 d of refrigerated storage
(Dunn and others 1988).
Pulsed light was reported to be effective in eliminating micro
bial contamination from the surface of eggshells. Up to an 8-log
reduction of Salmonella Enteriditis was achieved for commercial
or raw eggs, which were treated with 0.5 J/ cm2 for 8 flashes (Dunn
1995). On the surface of different packaging materials inoculated
with 10-1000 cfu/cm2, a single light pulse inactivated S. aureus
with an intensity as small as 1.25 J/ cm2, while B. cereus and As-

AC
Power
irlX'
Low Power Source Power Conditioning System Treatment Chamber

10kW 10MW

I 200ms
typical
r.-------.1
300us
typical

Time Time
Charging Discharging
Pig. a-Inactivation of (al oherfohla coll vegetative cell 1181ng ftl
teNCI apectrum-llght and (bl . .clllw ..,,,,,,,. aporn 1181ng tull-apN
Pig. a-Schelllatlc diagram of a pulMcl llght treatment aptem trum llght. (Dunn and othera 18881

Supplement-JOURN7'1.. OF POOD SCIENCE 83

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
Table 1-Treatment of Blow-PIii . . .i Packaging using pulnd llght vate pathogens and indicator organisms (Chang and others
Organism Inoculation (In 20 ml) 1985). The antimicrobial effects of these wavelengths are prima
Bacillus subtilis var. niger spores 4.8 X 106
rily mediated through absorption by highly conjugated carbon
Bacillus pomilus spores 3.0 X 106 to-carbon double-bond systems in proteins and nucleic acids
Bacillus stearothermophilus spores 4.4 X 106 (Jay 1992).
Clostridium sporogenes spores 2.4 X 106
Aspergillus niger spores 1.4x106
The mode of action of the pulsed light process is attributed to
Candida albicans 3.0 X 106 unique effects of the high peak power and the broad-spectrum
Deinococcus radiodurans 2.2 X 106 of the flash. A primary cellular target is nucleic acids. Inactivation
Staphylococcus aureus 5.6 X 106 occurs by several mechanisms, including chemical modifications
Enterococcus faecalis 2.0 X 106
Escherichia coli 3.4 X 106 and cleavage of the DNA. The impact of pulsed light on proteins,
Salmonella choleraesuis 1.8x106 membranes, and other cellular material probably occurs concur
Pseudomonas aeruginosa 2.8 X 106 rently with the nucleic acid destruction. For example, the motility
of E. coli ceases immediately after exposure to pulsed light. In
challenge microorganisms and treated with pulsed light under additional studies, loss of motility of protozoan sporozoites was
sterilizing conditions. Each set of 20 containers was tested for ste observed after pulsed light treatment of oocysts. As with any le
rility by the membrane filter technique described in the Japa thal physical agent, it is difficult to determine the actual se
nese Pharmacopoeia. Pulsed light was applied in 2 modes. In 1 quence of events due to the possible "domino effect" (Pure Pulse
mode, containers were treated using a lamp reflector that illumi Technologies Inc. 1999).
nated each container from above (single lamp/reflector or SLR Experience suggests that shorter wavelengths in the UV
mode). For SRL mode, 20 flashes at 1 J/cm2/flash were used range of 200-320 nm are more efficient inactivation agents than
(Dunn and others 1991). In the second treatment mode, the con the longer wavelengths due to their higher energy levels. Be
tainers were treated in a reflective cavity containing a single cause DNA is a target molecule for these UV wavelengths, it is
lamp, which was flashed 10 times (cavity treatment or CT mode). thought that the one primary cause of killing microorganisms is
For the sterility test, 0.5, 5, and 15 ml samples were assayed di through DNA structural changes (Farkas 1997). Conventional UV
rectly for the presence of survivors using 20, 40, and 60 ml pour treatment primarily affects DNA by mechanisms that are revers
plates, respectively. In addition, 120 ml samples were assayed by ible under certain experimental conditions. Cell repair systems
filtration through a 0.45 mm filter. are classified as either "dark enzymatic repair" or "light enzymat
Dunn and others (1991) reported that in the SLR mode, 36 out ic repair" (PurePulse Technologies Inc. 1999). Experiments de
of 40 A. niger samples were sterile, and all 40 Bacillus pumilus, B. signed to test enzymatic repair of DNA using pulsed light have
subtilis, and Bacillus stearothermophilus spore inoculated sam shown that this repair does not occur after pulsed light treat
ples were sterile. No viable organisms were recovered from any of ment. The magnitude of the damage caused by pulsed light may
the 160 samples treated using the CT mode. also be too massive for the repair mechanisms to be effective. It
is conceivable the DNA repair system itself is inactivated as well
3. Mechanisms of Microbial Inactivation as other enzymatic functions. In summary, the high energy and
'T'-fE LETHALITY OF THE LIGHT PULSES IS DIFFERENT AT DIFFERENT intensity of pulsed light are thought to amplify the known mech
.l wavelengths. Therefore, the full spectrum or selected wave anisms of destruction of cellular components caused by individ
length may be used to treat the foods. Wavelengths known to ual wavelengths of light. The sum of the damage caused by the
produce undesirable products in foods are eliminated by filter broad-spectrum light is thought to produce extensive irrevers
ing through glass or liquid filters. Light pulses induce photo ible damage to DNA, proteins, and other macromolecules.
chemical or photothermal reactions in foods. The UV-rich light
causes photochemical changes, while visual and infrared lights 4. Validation/Critical Process Factors
cause photothermal changes. UV light has been shown to inacti-
4.1. Critical Process Factors
Due to failure of light to penetrate opaque and irregular sur
faces, there is generally less microbial inactivation with pulsed

Pig. 4-lnactlvatlon of Aspel'fl#llua n,.., spores using full-spectrum Pig, II-Inactivation of Aaperg/llua nlfler spores using flltered-apoc
llght. (Dunn 11188) trum llght (Dunn and others 11188)

84 JOURNAL. Of' FOOD SCIENCE-Supplement

Pulsed Light Technology ...
light, compared to other technologies. Light characteristics Table 2-The effects of fluence on different mlcroorganlm ub
Jected to puled llght treatment
(wavelength, intensity, duration and number of the pulses).
packaging and food attributes (type, transparency and color) are Recovery cfu/ml
considered to be critical process factors. In the case of a fluid Bacl/lus Baell/us Baclllus Asperg/1/us
food, transparency and depth of the fluid column become critical stearothermophllus subt/1/s puml/us n/ger
factors. O J/cm 2 1.4 X 106 2.6 X 106 3.1 X 106 l'D
Despite its minimal effectiveness with opaque foods, pulsed O J/cm 2 1n 436 570 l'D
light has been reported to have limited ability to reduce microbi O J/cm 2 63 43 90 l'D
O J/cm 2 l'D l'D l'D l'D
al counts (about 1- to 4-log cycles) on eggs, including organisms
ND, not detectable
inoculated onto the surface of eggs and then drawn into egg air
pores by a temperature differential (Dunn and others 1995).
The lethality of the pulsed light increases with increasing
light intensity or fluence (PurePulse Technologies Inc. 1999), al Differences between this technology and that of the more
though formulation of a model for dose-response is not currently conventional UV (254 nm) light treatment.
possible. Data presented in Table 2 summarizes experiments ex Mechanisms of microbial inactivation to determine wheth
amining the effect of pulsed light on spores from 3 different er they are significantly different from those proposed for UV
strains of Bacillus spp. and A. niger. The spores were exposed to 3 light.
flashes from a single lamp with flashes of0.5 J/cm2, 0.75 J/cm2, Understanding of the mechanism and quantification of
and 1.5 J/cm2 per flash (PurePulse Technologies Inc. 1999). Mi the benefit attributed to the pulse effect.
crobial reduction increased with increasing light intensities.

5. Process Deviations Glossary

A COMPLETE LIST OF DEFINITIONS REGARDING ALL THE TECH
I N THIS APPLICATION, EACH PULSED LIGHT SYSTEM IS DESIGNED
with monitoring devices that capture lamp output (fluence)
and the lamp current. The silicon photo-diode detectors mea
.r\nologies is located at the end of this document.
Broad-spectrum light. For pulsed light technology, the ultra
sure fluence in the UV range wavelengths. The UV range is moni violet, visible and infrared light wavelengths.
tored because it is the most sensitive to variations in both the Energy density. See light fluence.
lamp drive and the optical characteristics of the lamp units. Due Light fluence. Energy delivered from a light source per unit
to the nature of the lamps and the lamp unit optics, a change in area (Joules/ cm2).
the UV output of the system will always be detected before any High voltage switch. Device used to trigger the delivery of
measurable changes occur in the full spectrum output. There high intensity light pulses to foods or packaging materials.
fore, monitoring the UV output is the best measure of overall sys
tem performance, even though all the wavelengths contribute to References
Barbosa-Canovas, G. V., Palou, E., Pothakamury, U. R. and Swanson, B. G. 1997. Application
the microbiocidal effect. Should a flash fall below the validated of light pulses in the sterilization of foods and packaging materials. Non thermal Preser
minimum threshold, the pulsed light system can be pro vation of Foods. Chapter 6-139-161. Marcel Dekker. New York.
Chang, J.C. H., Ossoff, S. F., Lobe, D. C., Dorfman, M. H., Dumais, C. M., Qualis, R. G. and
grammed to automatically shut down to avoid underprocessing. Johnson, J. D. 1985. UV inactivation of pathogenic and indicator microorganisms. Appl
Monitors are available to measure the full spectrum of light or Environ! Microbial. 49:1361-1365.
Dunn, J.. Clark, R. W., Asmus, J. F., Pearlman, J. S., Boyer, K., Pairchaud, F. and Hofmann, G.
specific wavelengths of interest. The lamp current determines 1988. Methods and apparatus for preservation of foodstuffs. US Int. Pat. Appl. No. WO
the light intensity and spectrum. Monitors record the lamp cur 88/03369.
Dunn, J., Clark, R. W., Asmus, J. F., Pearlman, J. S., Boyer, K., Pairchaud, F. and Hofmann, G.
rent for each flash and have the capability of halting operations A. 1991. Methods for preservation of foodstuffs. Maxwell Laboratories, Inc. US Patent
if an abnormal signal is detected. 5,034,235.
Dunn, J., Clark, W. and Ott, T. 1995. Pulsed-light treatment of food and packaging. Food
Technol. 49(9):95-98.
6. Research Needs Dunn, J. 1996. Pulsed light and pulsed electric field for foods and eggs. Poul Sci. 75(9):1133
1136.
A_ GREAT DEAL OF RESEARCH REMAINS TO BE DONE BEFORE Dunn, J.E., Ott, T.M., Clark, R.W. 1996 Prolongation of shelf-life in perishable pod products.
Ilpuised light technology will be suitable for commercial use. U.S. Patent 5,489,442.
Farkas, J. 1997. Physical methods of food preservation. Food Microbiology. Fundamentals
Most results presented in this report should be confirmed by in and Frontiers. M.P. Doyle, L.R. Beauchat, T.J. Montville(eds.). Washington, D.C. ASM
dependent researchers. The following is a list of areas where rele Press.497-519.
Jay, J. J. 1996. Modern food microbiology. Chapman Hall. New York.
vant information is lacking: Lagunas-Solar, M. C. 1997. Method of controlling insects and mites with pulsed ultraviolet
Identification of critical process factors and their effect on light. Regents of the University of California. The Regents of the University of California.
US Patent 5,607,711.
microbial inactivation. MacGregor, S. J., Anderson, J. G., Fouracre, R. A., Farish, 0., Mcllvaney, L. and Rowan, N. J.
Suitability of the technology for solid foods and non-clear 1998. Light Inactivation of food-related pathogenic bacteria using a pulsed power source.
Lett Appl Microbiol. 27:67-70.
liquids where penetration depth is critical. PurePulse Technologies. 1999. PureBright CoolPure advanced sterilization, decontami
Potential formation of unpalatable and toxic by-products. nation and preservation technology for the food and food packaging industry. San Diego,
CA. PurePulseTechnologies Inc. Brochure. http:/ /www.packaging2000.com/purepulse/
Resistance of common pathogens or surrogate organisms Purepulse.html
to pulsed light treatments.

Supplement-JOURNAL. OF FOOD 9C1BNCB 85

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies

Oscillating Magnetic Fields

GUSTAVO V. BARBOSA-CANOVAS, DONALD W. SCHAFFNER, MERLE D. PIERSON, AND Q. HOWARD ZHANG

Scope of Deliverables: This section reports the effects of magnetic fields on microbial f>opulations. Mechanisms of
inactivation and critical process factors are described. Results of microbial testing experiments are controversial.
Consistent results concerning the efficacy of this method are needed before its potential use as a food preservation
method ls assessed.

1. Definition, Description and Applications equate to reduce the bacterial population between 102 and 103
(SMF) AND OSCILLATING (OMF) MAGNETIC FIELDS HAVE cfu/g. The intensity of the magnetic field required to achieve
S TATIC
been explored for their potential as microbial inactivation
methods. For SMF, the magnetic field intensity is constant with
these effects varied between 2-25 T and a frequency range from
5-500Hz.
time, while an OMF is applied in the form of constant amplitude A review of the literature shows that inconsistent results have
or decaying amplitude sinusoidal waves. The magnetic field may been obtained on the effect of OMF on microbial growth (Table
be homogeneous or heterogeneous. In a homogeneous magnetic 1). In some cases OMF stimulated or inhibited microbial growth
field, the field intensity B is uniform in the area enclosed by the and, in others, it had no effect on microbial growth. The results
magnetic field coil, while in a heterogeneous field, B is nonuni presented in Table 1 show that, although not well understood,
form, with the intensities decreasing as distances from the center the effect of magnetic fields on the microbial population of foods
of the coil increases. OMF applied in the form of pulses reverses may depend on the magnetic field intensity, number of pulses,
the charge for each pulse, and the intensity of each pulse de frequency and property of the food (that is, resistivity, electrical
creases with time to about 10% of the initial intensity (Pothaka conductivity, and thickness of the foodstuff).
mury and others 1993).
Preservation of foods with OMF involves sealing food in a 3. Mechanisms of Microbial Inactivation
plastic bag and subjecting it to 1 to 100 pulses in an OMF with a
frequency between 5 to 500 kHz at temperatures in the range of
0 to 50 c for a total exposure time ranging from 25 to 100 .s. Fre
S MF OR OMF MAY HAVE SOME POTENTIAL TO INACTIVATE MICRO
organisms in food. Pothakamury and others (1993) reported
2 theories to explain the inactivation mechanisms for cells placed
quencies higher than 500 kHz are less effective for microbial in in SMF or OME The first theory stated that a "weak" OMF could
activation and tend to heat the food material (Barbosa-Canovas loosen the bonds between ions and proteins. Many proteins vital
and othersl998). Magnetic field treatments are carried out at at to the cell metabolism contain ions. In the presence of a steady
mospheric pressure and at moderate temperatures. The temper background magnetic field such as that of the earth, the biologi
ature of the food increases 2-5 C. According to Hoffman (1985) cal effects of OMF are more pronounced around particular fre
exposure to magnetic fields causes inhibition in the growth and quencies, the cyclotron resonance frequency of ions (Coughlan
reproduction of microorganisms. OMF of intensity of 5 to 50 telsa and Hall 1990).
(Tl and frequency of 5 to 500 kHz was applied and reduced the An ion entering a magnetic field B at velocity v experiences a
number of microorganisms by at least 2-log cycles. Within the force F given by:
magnetic field of 5-50 T, the amount of energy per oscillation
coupled to 1 dipole in the DNA is 10-2 to 10-3 eV (Hoffman F =qvxB (1)
1985). OMF of this intensity can be generated using: (1) super
conducting coils; (2) coils which produce DC fields; or (3) coils en Figure 1 shows the movement of a charged particle in a mag
ergized by the discharge of energy stored in a capacitor (Gersdof netic field. When v and B are parallel, F is zero. When vis normal
and others 1983). Inhibition or stimulation of the growth of mi to B, the ion moves in a circular path (Fig. 2). For other orienta
croorganisms exposed to magnetic fields may be a result of the tions between n and B, the ions move in a helical path (Fig. 3).
magnetic fields themselves or the induced electric fields. The lat The frequency at which the ions revolve in the magnetic field is
ter is measured in terms of induced electric field strength and in known as the ion's gyrofrequency n, which depends on the
duced current density. To differentiate between electric field and charge/mass ratio of the ion and the magnetic field intensity:
magnetic field effects, a cylindrical enclosure containing cells
and a medium that can be adapted to in vitro studies employing n = q B / (2 1r ml (2)
uniform, single-phase, extremely low frequency (ELF) magnetic
fields is recommended. where q is the charge and m is the mass of the ion. Cyclotron res
onance occurs when n is equal to the frequency of the magnetic
2. Inactivation ofMicroorganisms field. At 50 .T, the resonance frequency of Na+ and Ca+ is 33.33
,TOSHIMURA (1989) CLASSIFIED THE EFFECTS OF MAGNETIC and 38.7 Hz, respectively. At cyclotron resonance, energy is trans
.l fields on microbial growth and reproduction as (1) inhibitory, ferred selectively from the magnetic field to the ions with n
(2) stimulatory and (3) none observable. Pothakamury and oth equivalent to frequency of the magnetic field. The interaction
ers (1993) summarized the effect of magnetic fields on microor site of the magnetic field is the ions in the cell, and they transmit
ganisms as shown in Table 1. the effects of magnetic fields from the interaction site to other
Hoffman (1985) reported on the inactivation of microorgan cells, tissues, and organs.
isms with OMF in milk, yogurt, orange juice, and bread roll A second theory considers the effect of SMF and OMF on calci
dough. According to Hoffman (1985) only 1 pulse ofOMFwas ad um ions bound in calcium-binding proteins, such as calmodulin.

86 JOURNAL.. Of' FOOD SCIBHCB-Supplement

Oscillating Magnetic Fields ...
Table 1 ttect of magnetic tleld on mlcroorganlm
Mlcroorganlam Type of Fleld Frequencyof Effect Reference
Magnetic flelcP Strength (T) pulH(Hz)
Wine yeast cell Heterogeneous 0.04 0 Growth inhibited when exposed for 5,
Smagnetic field 20, 25, 60, 120, or 150 min; no inhibition
for 10, 15, 17 min exposure Kimball (1937)
Wine yeast cell Heterogeneous 1.1 0 No effect for 5, 10, 20, 40 or 80 min exposure Kimball (1937)
Smagnetic field
Serratia Heterogeneous 1.5 Growth rate remains same as in controls up to 6 h; Gerenscer and
marcescens Smagnetic field growth rate decreases between 6 and 7 h and again others (1962)
increases between 8 and 10 h; at 10 h cell population
same as in controls
Staphylococcus Heterogeneous 1.5 0 Growth rate increases between 3 and 6 h; then Gerenscer and
aureus Smagnetic field decreases between 6 and 7 h; cell population at 7 h is others (1962)
same as controls
Saccharomyces Heterogeneous 0.465 0 Rate of reproduction reduced, incubated Van Nostrand
cerevlslae Smagnetic field for 24, 48 or 72 h and others (1967)
Escherichia coli Smagnetic field 0.3 0 Growth simulated Moore (1979)
Halobacterium halobium, Smagnetic field 0,015 0 Growth inhibited Moore (1979)
Bacillus subtllis 0.03
0.06
Pseudomonas aeruginosa, Omagnetic field O.Q15 0.1-0.3 Growth simulated; stimulation increases with increase Moore (1979)
Candida albicans 0.03 in frequency
0.06
E.coli Omagnetic field 0.15 0.05 Inactivation of cells when concentration was 100 cells/ml Moore (1979)
Streptococcus Omagnetic field 12.0 6,000 Cell population reduced from 25,000 cells/ml to 970 Moore (1979)
themophilus in milk (1 pulse)
Saccharomyces Omagnetic field 40.0 416,000 Cell population reduced from 3,500 cells/ml to 25 Hofmann (1985)
in yogurt (10 pulses)
Saccharomyces in Omagnetic field 40.0 416,000 Cell population reduced from 25,000 cells/ml to 6 Hofmann (1985)
orange Juice (1 pulse)
Mold spores Omagnetic field 7.5 8,500 Population reduced from 3,000 spores/ml to 1 Hofmann (1985)
(1 pulse)
Saccharomyces Smagnetic field 0.56 0 Decreased growth rate; interaction between temperature Van Nostrand
cerevislae and magnetic field only during the logarithmic phase and others ( 1967)
Smagnetlc field =static magnetic field; Omagnetic field =oscillating magnetic field

The calcium ions continually vibrate about an equilibrium posi cules such as DNA. Within 5-50 T range, the amount of energy
tion in the binding site of calmodulin. A steady magnetic field to per oscillation coupled to 1 dipole in the DNA is 10-2 to 10-3 eV.
calmodulin causes the plane of vibration to rotate, or proceed in Several oscillations and collective assembly of enough local acti
the direction of magnetic field at a frequency that is exactly 1/2 of vation may result in the breakdown of covalent bonds in the
the cyclotron frequency of the bound calcium. Adding a "wob DNA molecule and inhibition of the growth of microorganisms
bling" magnetic field at the cyclotron frequency disturbs the pre (Pothakamury and others 1993).
cision to such an extent that it loosens the bond between the cal The work of San-Martin and others (1999) shows that an exter
cium ion and the calmodulin (Pothakamury and others 1993). nally applied electromagnetic signal at frequencies close to a giv
Hoffman (1985) suggested that the inactivation of microor en resonance and parallel to an SMF (Fig. 4) may couple to the
ganisms may be based on the theory that the OMF may couple corresponding ionic species in such a way as to selectively trans
energy into the magnetically active parts of large critical mole- fer energy to these ions and thus indirectly to the metabolic ac-

B
B

y
V
V

............

..
Pig. 1-Clla1'11ff particle In a magnetic field Pig. 2-Cllarged particle In a magnetic tleld when Y la normal to B

Supplement-JOURNAL. OP POOD 6C1BNCB 87

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Pood Processing Technologies
tivities in which they are involved. The earth's total field ranges pared with homogeneous fields. Based on the assumption that
from 25 to 70 T. Most of the slightly and double charged ions of magnetic fields could act as a stress factor, cells collected after 30
biological interest have corresponding gyrofrequencies in the min of incubation under magnetic field treatment (lag or early
ELF range 10 to 100 Hz for this field strength. lag growth phase) or in the stationary phase after long-term mag
netic field treatment were heated to 54 C. No differences were
4. Validation/Critical Process Factors observed between the treated and control samples. Little else is

T HE CRITICAL PROCESS FACTORS AFFECTING THE INACTIVATION known about the effect of microbial growth stage on susceptibili
of microbial populations by magnetic fields are not com ty to magnetic fields.
pletely understood. Some factors believed to influence microbial
inactivation include magnetic field intensity, electrical resistivity, 5. Process Deviations
and microbial growth stage. T"\ATA ACQUISmON SYSTEMS MUST BE INSTALLED IN THE PROCESS-
1.../ing area to monitor and control the power source, number of
4.1. Magnetic Field pulses, and frequencies applied to the food. Food composition,
Exposure to a magnetic field may stimulate or inhibit the temperature, size of unit, among other factors also would require
growth and reproduction of microorganisms. A single pulse of in control and monitoring to assure constant treatments. Any devi
tensity of 5 to 50 T and frequency of 5 to 500 kHz generally reduc ation from the specified conditions such as temperature changes
es the number of microorganisms by at least 2-log cycles (Hoff must be continuously recorded and appropriate responses tak
man 1985). High intensity magnetic fields can affect membrane en. If the system shuts down or fails to deliver the described
fluidity and other properties of cells (Frankel and Liburdy 1995). treatment during processing, the food must be reprocessed to
Inconsistent results of other inactivation studies (see Table 1), assure quality and safety.
however, make it impossible to clearly state the microbial inacti
vation efficiency of magnetic field or to make any predictions 6. Research Needs
about its effects on microbial populations. 'l""fERE IS A SIGNIFICANT LACK OF INFORMATION ON THE ABILITY
.1. of OMF treatment to inactivate pathogenic microorganisms
4.2. Electrical Resistivity and surrogates. A main area that needs to be elucidated is the
For microorganisms to be inactivated by OMF. foods need to confirmation that magnetic field treatment is an effective pro
have a high electrical resistivity (greater than 10 to 25 ohms-cm). cess to inactivate microbes. Once this is established, significant
The applied magnetic field intensity depends on the electrical data gaps still must be closed before this technology can be safe
resistivities and thickness of the food being magnetized, with ly and practically applied to food preservation. Some of the more
larger magnetic fields intensities used with products with large significant research needs are:
resistivity and thickness. Identify key resistant pathogens.
Establish the effects of magnetic fields on microbial inacti
4.3. Microbial Growth Stage vation.
Tsuchiya and others (1996), working with homogeneous (7 T) Elucidate the destruction kinetics of magnetic fields.
and inhomogeneous (5.2 to 6.1 T and 3.2 to 6.7 T) magnetic Determine the mechanism of action of magnetic fields.
fields, found a growth stage dependent response of Escherichia Determine critical process factors and effects on microbial
coli bacterial cultures. The ratio of cells under magnetic field to inactivation.
cells under geomagnetic field was less than 1 during the first 6 h Validate the process and evaluate indicator organisms and
of treatment and greater than 1 after 24 h. These authors also appropriate surrogates.
found that cell survival was greater under inhomogeneous com- Identify process deviations and determine ways to ad
dress them.

GIO!&U'Y
A COMPLETE LIST OF DEFINITIONS REGARDING ALL THE TECH
VAT ARBITRARY flnologies is located at the end of this document.
ANGLE TO B V

DC AC
Magnetic Magnetic
Field Field
V1 CAUSES PARTICLE
TO MOVE IN HELIX

Pig. 3-Charged particle In a magnetic field when V make an arbl Pig. 4-Requlred AC and DC magnetic field orientation to achieve Ion
trary angle with B cyclotron

88 JOURN1'L OP FOOD SCIENCE-Supplement

Oscillating Magnetic Fields ...
Cyclotron resonance. Phenomenon that occurs when the fre References
quency of revolving ions induced by a specific magnetic field in Barbosa-Canovas, G.V., Pothakamury, U. R., and Barry, G.S. 1994. State ofthe art technologies
for the stabilization of foods by non-thermal processes: physical methods. In: Barbosa
tensity is similar to the frequency of that magnetic field and par Canovas, G.V., and Welti-Chanes, J.(eds.), Food Preservation by Moisture control. Lan
allel to it. In these instances, energy may be transferred to the caster, Technomlc Publishing.pp. 423-532.
Barbosa-Canovas, G.V.. Gongora-Nieto, M.M., and Swanson, B.G. 1998. Nonthermalelectri
ions, affecting cell metabolic activities. cal methods in food preservation. Food Sci. Int. 4(5):363-370.
Cyclotron. An accelerator in which particles move in spiral Coughlan, A., Hall, N. 1990. How magnetic field can influence your lons7 New Scientist.
8(4):30.
paths in a constant. Frankel, R. B. and Llburdy, R. P. 1995. Biological effects of static magnetic fields. In Hand
Dipole. For oscillating magnetic fields, a magnetic particle book of Biological Effects of Electromagnetic Fields. Polle, C. and Postow, E. (Ed). 2'' Ed.
CRC Press. Boca Raton, FL.
that contains a *north* and *south* magnetic pole. Gerencser, V.F., Barnothy, M.F., and Barnothy, J.M. 1962. Inhibition of bacterial growth by
Gyrofrequency. Frequency at which the ions revolve in a mag magnetic fields. Nature, 196:539-541.
Gersdorf, R., deBoer, F.R., Wolfrat, J.C .. Muller, F.A., Roeland, L.W. 1983. The high magnetic
netic field. facility of the University ofAmsterdam, high field magnetism. Proceedings International
Heterogeneous magnetic field. Magnetic field that exhibits a symposium on High Field Magnetism. Osaka, Japan. 277-287.
Hofmann, G.A. 1985. Deactivation of microorganisms by an oscillating magnetic field. U.S.
gradient depending on the nature of the magnet. Patent 4,524,079.
Homogeneous magnetic field. Magnetic field with a constant Kimball, G.C. 1937. The growth of yeast on a magnetic fields. J. Bacterial. 35: 109-122.
Moore, R.L. 1979. Biological effects ofmagnetic fields. Studies with microorganisms. Can. J.
strength over space. Microbial.. 25: 1145-115 I.
Magnetic flux density. Force that an electromagnetic source Pothakamury, U.R., Barbosa-Canovas, G.V., and Swanson, B.G. (1993). Magnetic-field inac
tivation ofmicroorganisms and generation of biological changes. Food Technol. 47(12):85
exerts on charged particles. Magnetic flux density is measured in 93.
Telsa (1 Telsa = 104 gauss). San-Martin, M.F., Harte, F.M., Barbosa-Canovas, G.V., and Swanson, B.G. 1999. Magnetic
field as a potential non-thermal technology for the inactivation of microorganisms.
Oscillating magnetic field. Fields generated with electromag Washington State University, Biological Systems Engineering, Pullman, WA.. USA. (Un
nets of alternating current. The intensity varies periodically ac published).
Tsuchiya, K.. Nakamura, K., Okuno, K., Ano, T. and Shoda, M. 1996. Effect of homogeneous
cording to the frequency and type of wave in the magnet. and inhomogeneous high magnetic fields on the growth of Escherichia coli. I Ferment
Sinusoidal Wave. A mode of propagation of the magnetic field. Bioeng81 (4):343-346.
Van Nostran, F.E., Reynolds, R.J. and Hedrick, H.G. 1967. Effects of a high magnetic field at
Static magnetic field. Magnetic fields with a constant strength different osmotic pressures and temperatures on multiplication of Saccharomyces cere
overtime. vislae. Appl Microbiol. 15: 561-563.
Yoshimura, N. 1989. Application of magnetic action for sterilization of food.
Telsa. Unit to express magnetic flux density (B). I Telsa (Tl = Shokukin Kihatsu 24(3):46-48.
104 gauss.

Supplement-JOURNAL Of' FOOD 9C1BNCB 89

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

Ultraviolet Light
SUDHIR K. SASTRY, ASHIM K. DA'ITA, AND RANDY W. WOROBO

Scope of Deliverables: This section covers information, where available, on microbial kinetics and relevant safety
considerations when ultraviolet (UV) radiation is used for the purposes offood preservation. The section pays particu
lar attention to the growing interest in using UV light to treat fruit juices, especially apple juice and cider. It does not
include pulsed UV, which is being actively investigated by Dr. Lagunas-Solar and co-workers at the University of Calif.,
Davis, nor does it address combinations of other alternative processing technologies with UV processing.

1. Definition, Description and Applications hensive microbial inactivation reaction kinetics data or models.
There are, however, studies relative to the UV radiant exposure
U LTRAVIOLET PROCESSING INVOLVES THE USE OF RADIATION
from the ultraviolet region of the electromagnetic spectrum
for purposes of disinfection. Typically, the wavelength for UV
required to obtain a 4-log reduction of various microorganisms,
using 254 nm UV light (Table 1). These data suggest that the log
processing ranges from 100 to 400 nm. This range may be further reduction is related to the UV radiant exposure (J / m2). The curve
subdivided (Bolton 1999) into UVA (315 to 400 nm) normally re has a linear section with a shoulder and tailing effects (Hoyer
sponsible for changes in human skin that lead to tanning; UVB 1998). All tested organisms were reduced by 4-log cycles with UV
(280 to 315 nm) that can cause skin burning and eventually lead radiant exposure less than 400 J/m 2 (Hoyer 1998). With some bac
to skin cancer; UVC, (200 to 280 nm) called the germicidal range terial cells, photoreactivation, a repair mechanism that is en
since it effectively inactivates bacteria and viruses, and the vacu hanced by visible light in the blue spectral range, may occur.
um UV range (100 to 200 nm) that can be absorbed by almost all Photoreactivated cells show greater resistance to UV radiation
substances and thus can be transmitted only in a vacuum. The than non-reactivated cells (Table 1).
germicidal properties of UV irradiation are mainly due to DNA
mutations induced through absorption of UV light by DNA mole 3. Mechanisms of Microbial Inactivation
cules. This mechanism of inactivation results in a sigmoidal
curve of microbial population reduction. 3.1. Pathogen Culture Maintenance and Growth
To achieve microbial inactivation, the UV radiant exposure The E. coli strains were kept in 30% glycerol at -80 c and,
must be at least 400 J/m2 in all parts of the product. Critical factors when needed, were inoculated onto Tryptic Soy Agar, grown at
include the transmissivity of the product, the geometric configura 37 c for 18h with 250 rpm shaking agitation that provided the
tion of the reactor, the power, wavelength and physical arrange necessary aeration for good growth. The innoculation procedure
ment of the UV source(s), the product flow profile, and the radia was repeated 3 times before use (Worobo 1998).
tion path length. UV may be used in combination with other alter
native processing technologies, including various powerful oxidiz 3.2. Microbial Enumeration Conditions and Methods
ing agents such as ozone and hydrogen peroxide, among others. Apple cider was inoculated with E. coli0157:H7 to achieve an
Applications include disinfection of water supplies and food initial level of approximately 7- to 8-logs cfu/ml. High inoculum
contact surfaces. Recently, interest has increased in using UV to levels are required to ascertain a 5-log or greater reduction in the
reduce microbial counts in juices. target pathogen. The initial levels of E. coli O 157:H7 were deter-

2. Pathogens of Public Health Concern Table 1-UV U4 nm radiant ........... (J/m91 for 4109 Nductl

.,,_ ...,_ 18981

2.1. Pathogens of Concern in Apple Juice and Cider Microorganism Expoaure required Expoaure required
Escherichia coli 0157:H7 is a nonsporeforming bacterium that without with
photoreactlvallon photoreactlvatlon
has been implicated in numerous foodborne illness outbreaks of (J/m2) (J/m2)
contaminated, raw apple cider. Cryptosporidium parvum is a pro
Escherichia coli
tozoan parasite that has the capability of forming oocysts and ATCC11229 100 280
has also been implicated as the causative agent in a foodborne E. coliATCC23958 50 200
illness outbreak of apple cider in New York State. E. coli NCTC 5934 90 215
E coli NCIB 9481 100 180
E. coll wild isolate 110 270
2.2. Shape of Inactivation Curve Enterobacter cloacae 100 330
The shape of the curve for microbial inactivation by UV light Klebsiella pneumoniae 110 310
Citrobacter freundii 80 250
is sigmoidal. The initial plateau is due to an injury phase of the Yersinia enterocolitica 100 320
microorganism in response to UV exposure. After the initial pla Salmonella Typhi 140 190
teau, the maximum amount of injury has been surpassed; thus, Salmonella Typhimurium 130 250
minimal additional UV exposure would be lethal for microorgan Serratla marcescens 130 300
Enterocolltlca faeclum 170 200
isms and survivor numbers rapidly decline. The end of the curve Vibrio choleras wild isolate 50 210
has a tailing phase due to UV resistance of the microorganisms Pseudomonas aeruginosa 110 190
and to experimental components, such as suspended solids that Mycobacterlum smegmatis 200 270
Polio virus (Mahoney) 290
may block the UV irradiation. Rotavirus SA 11 350
Much of the prior literature has focused on UV disinfection of Staphylococcus aureus
water supplies. The literature is insufficient to develop compre phageA994 380

90 JOURNAL Of' FOOD SCIBNCB-Supplement

Ultraviolet Light ...
mined and then cider was processed through the CiderSure ma literature. The common expressions of irradiance, fluence rate,
chine. Enumeration of aseptically drawn samples was done with and fluence, and their distinction (Bolton 1999), are defined in
Tryptic Soy Agar and incubation at 37 C for 24 to 48 h (Worobo the Glossary. It is important to point out that fluence rate refers
2000). The primary reference used in identifying these standard to power passing through a sphere, while irradiance refers to
enumeration methods is: Compendium of Methods for the Mi power passing through a surface. For a parallel and perpendicu
crobiological Examif!ation of Foods, Third Edition. 1992. Edited larly incident beam, not scattered or reflected, irradiance and
by: Carl Vanderzant, Ph.D. and Don R Splittstoesser, Ph.D. com fluence rate become identical. For any UV source within a 3-di
piled by the American Public Health Association (APHA) Techni mensional volume, the integration of UV irradiance over the in
cal committee on Microbiological Methods for Foods terior surface of the volume yields the UV power of the lamp.
This is not true for UV fluence rate. The appropriate term for UV
3.3. Inactivation Mechanism(s) disinfection is "UV fluence rate" because a microorganism can re
The germicidal properties of ultraviolet irradiation are due to ceive UV power from any direction, especially when multiple
the DNA absorption of the UV light, causing crosslinking be lamps are used. The light dose or fluence is the total radiant en
tween neighboring pyrimidine nucleoside bases (thymine and ergy of all wavelengths passing from all directions through an in
cytosine) in the same DNA strand (Miller and others 1999). Due finitesimally small sphere. It is given by the average fluence rate
to the mutated base, formation of the hydrogen bonds to the pu times the exposure time in s. The term "UV dose" is often used in
rine bases on the opposite strand is impaired. DNA transcription UV disinfection literature and represents UV exposure of a given
and replication is thereby blocked, compromising cellular func organism in the germicidal range.
tions and eventually leading to cell death. The amount of It may be noted that although Bolton (1999) prefers the use of
crosslinking is proportional to the amount of UV exposure. The UV fluence rate, the term "irradiance" is commonly used in the
level of mutations that can be reversed depends on the UV re water disinfection literature. Indeed, it appears that in some of
pair system present in the target microorganism. Once the the German standards the word irradiance was used (Hoyer
threshold of crosslinking has been exceeded, the number of 1998). Nevertheless, the use of the more technically accurate
crosslinks is beyond repair, and cell death occurs (Miller and oth concept of UV fluence rate is preferred.
ers 1999). This phenomenon is reflected in the shape of the inac
tivation curve described before. The crosslinking threshold cor 4.2. Describe Methods to Measure/Monitor Critical
responds to the point of rapid decline after the initial plateau Process Factors
phase on the sigmoidal survival plot of UV exposure. In one system, sensors placed at a precise depth in the fluid
stream measure the actual power through the material. The unit
3.4. Methods to Measure, Quantify or Mathematically is programmed to deliver the same energy level to the material
Model Pathogen Inactivation and, therefore, adjusts the exposure time to achieve the proper
Ultraviolet light from germicidal lamps was exposed to inocu energy levels. In addition, if the material's absorption is very
lated apple cider by passing it through the processing tube at a high, the unit does not operate.
constant flow rate. The UV exposure was monitored using a sen UV irradiance may be monitored by radiometers, either ther
sor placed on the outermost exterior wall of the inner surface of mal or photonic, UV sensors, or actinometer; however, the most
the flow chamber. The D-value of E.coli 0157:H7 due to ultravio reliable method is still biodosimetry, where the sample is inocu
let exposure was calculated by increasing the exposures in the lated with a surrogate microorganism and log reductions are
same apple cider. Escherichia coli 0157:H7 survival was deter counted at the outlet. The protocols for monitoring many of the
mined for each successive level of UV exposure and D-value was other critical factors are not yet in place, and little or no informa
extrapolated from this multiple point data (Worobo, 2000). tion exists about them.
Detailed considerations monitoring UV radiant exposure
4.Validation/Critical Process Factors have been described by Hoyer (1998) and are described below.
Specific reference standards are in place in Germany for water
4.1. Identification and Description of Critical Process disinfection.
Factors To verify that UV radiant exposure exceeds 400 Jlm2 during
Little data is available on critical process factors affecting mi operation requires a link that assures the conditions approved as
crobial inactivation. Pressure, temperature, and pH of the medi sufficient by the biodosimetric test are met. This includes flow
um appear to have little effect on the absorption properties. control, achieved with calibrated UV selective monitoring sen
Product composition, solids content, color, starches, and the sors mounted in a port at a defined position of the UV system. In
overall chemistry of the food have a major effect. The effects of a specified range of flow, the UV irradiance (W /m2) at that port
these individual factors are not available. must be kept above the minimum level of the identical proto
For disinfection of water, it is essential that all parts (each volume type during the biodosimetric test. It must allow for independent
element) of the product receive a UV radiant exposure of at least control with a reference sensor. This monitoring ensures that
400 J/m2 (at 254 nm) to reduce human pathogens and virus by at changes which may reduce the disinfection effect are detected
least 4-log cycles (Bernhardt 1994). Thus, the homogeneity of the and measures to handle insufficient disinfection are taken.
flow pattern and the radiation field may have critical effects on dis UV sensors must be standardized. For independent control, a
infection. An additional critical factor is the transmissivity of the single type of reference sensor should monitor the irradiance for
material being disinfected. If the material is highly transparent to every UV system. This includes a standardized size for a measur
UV light, disinfection may be more effective; however, turbid mate ing port enclosed with a quartz glass panel of greater than 90 per
rials would attenuate and scatter UV radiation, resulting in less mi cent UV transparency. The manufacturer decides whether to use
crobial inactivation. The thickness of the radiation path through the the standard port for system monitoring or an independent sys
materials is also of importance, since attenuation increases with the tem sensor in the equivalent position, provided the signal is the
length of passage; thus, the geometric configuration of process sys same compared with a reference sensor. Prerequisites for a re
tems is critical. Another critical factor to consider is the UV wave producible measurement of UV irradiance are a defined opening
length used since this will affect microbial inactivation. angle, spectral selectivity, and a defined physical size of UV sen
It is important to note some of the key terms used in the UV sors. These are detailed within German standards (DVGW 1997).

Supplement-JOURN1'L. OF FOOD SCIBNCB 91

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
Because the mercury arc also emits radiation of higher wave Germs of E.coli ATCC 11229 being too sensitive to test for 400 J/m2
length, UV sensors must have a spectral selectivity radiation of but suitable to test for hydraulics, and spores of Bacillus subtilis
240-290 nm. Sensors sensitive to longer wavelengths would not ATCC 6633 (2.5-log reduction at 400 J/m2) being too insensitive to
detect the decay of microbiocidic radiation with sufficient liabili test for hydraulics but suitable to test for 400 J/ m2 are used.
ty because spectral absorption of FeO(OH), MnO(OH) 2, and hu
mic acids decreases with increasing wavelength and because ag 5. Process Deviations
ing of UV lamps predominantly occurs in the low wavelength
range, leaving the long-range radiation intensity almost un
changed. Therefore, radiation above 290 nm on stock contrib
P ROCESS DEVIATIONS IN THIS TECHNOLOGY ARE EQUJPMENT
specific. Since no standard equipment design currently ex
ists, the character of the deviation and the corrective action can
utes to more than 10 percent of the sensors' signal. Calibration of not be characterized in a simple manner within the scope of this
sensors for irradiance in W/m2 is standardized at 253.7 nm, the document; however, the procedures described by Hoyer (1998)
resonant band of mercury. This standardization is done by acti would appear to provide some hints.
nometry with uridine, via a transfer standard calibrated by a na To provide the required dosage, adjustment of the exposure
tional standardization body. The advantage of uridine is that its time is done by computers linked to sensors. The scan rate is
spectral absorption is nearly identical with the DNA. Radiant ex about 20 ms. This information is used for varying lamp power
posure is simply determined using a common laboratory spectro and/or changes in the absorption. UV irradiance measurement
photometer. should be done at various points in the system, but protocols are
The sensor port position must also allow for the detection of not available at this time.
water transmission changes to nearly the same degree as the de When the UV radiant exposure drops below a particular value,
crease of irradiation from aging or deposits. The position de as described by the above descriptions, the product would have
pends on individual construction of UV units and is tested with to be diverted and reprocessed or the system shut down.
changing UV lamps and changing the UV transmission proper
ties of the water by adding a UV dye. Along with this procedure 6. Research Needs
the sensitivity and spectral selectivity of the sensor is verified by Research that needs to be addressed includes:
comparison with the reference system. Effects of individual parameters, such as suspended and
Because one sensor can only monitor 1 or 2 lamps, in systems dissolved solids concentration.
with several lamps all UV lamps need to be monitored through Identification of the pathogens most resistant to UV light
electrical parameters. Additionally, all UV lamps in a system unit Identification of surrogate microorganisms for pathogens.
must be of the same age and quality and the quartz of the glass Development of validation methods to ensure microbio
panel must be guaranteed by the manufacturer and document logical effectiveness.
ed through identification marks. Development and evaluation of kinetic models.
Studies to optimize critical process factors.
4.3. Description of Microbial or Chemical Surrogates/
Indicators Glossary
Escherichia coli ATCC 25922 shows similar ultraviolet irradiation Fluence rate, Eo. The radiant power of all wavelengths pass
sensitivity to E. coli 0157:H7 and therefore would seem like an ap ing from all directions through an infinitesimally small sphere of
propriate surrogate microorganism. For the validation work, apple cross-sectional area dA, divided by dA (W /m2).
cider would be inoculated with the surrogate microorganism at high Irradiance, E. The total radiant power of wavelengths inci
levels to determine the inactivation effect of UV on the surrogate dent on an infinitesimal element of surface area dS containing
microorganism. The validations were repeated in triplicate and the the point under consideration divided by dS. Note that for the
microbiological plating performed in duplicate (Worobo, 2000). receipt of light, "irradiance" is the counterpart to "emittance" for
Hoyer (1998) describes the following set of recommendations for the emission oflight (W/m2).
testing drinking water systems. According to Hoyer (1998) the mini Light dose, tluence, or UV radiant exposure, H. The total radi
mum required irradiance (W/m2) should be tested by biodosimetry ant energy of all wavelengths passing from all directions through
measured by the system sensor (and in parallel with the reference an infinitesimally small sphere of cross-sectional area dA divided
sensor) at the minimum and maximum throughput as declared by by dA. It is given by the average fluence rate times the exposure
the manufacturer. The biodosimetric test with minimum flow is nec time in s. The term UV dose is often used in UV disinfection liter
essary due to the incomplete mixing expected under laminar flow. ature. It represents UV exposure of a given organism in the ger
The most important features of the biodosimetry test are the mixing micidal range (J/m2).
devices before and after the UV unit, proper mixing to better than
99% of added germs, and representative sampling. References
Anonymous. 1999. UV light provides alternative to heat pasteurization of juices. Food Tech
The disinfection performance at the minimum required irra nol. 53(9):144.
diance at the sensor port of the UV system is tested in 2 ways Bernhardt, H. 1994. Desinfektion aufbereiteter oberflachenwasser mit UV-Strahlen. Wasser
Abwasser. 135(12):677-689.
(Hoyer 1998): Bolton, J. R.1999. Ultraviolet Applications Handbook. Bolton Photosciences, Inc. Ayr. ON,
1. At the lowest 254 nm spectral absorption coefficient of wa CANADA NOB lEO.
DVGW Arbeitsblatt W 294, 1997. Deslnfektionsanlagen fur die Trinkwasserversorgung -
ter (less than or equal to 1 1/m), reducing the UV output of the Anforderungen und Prufung. Bonn.
lamps to the minimum required irradiance. Hoyer, 0. 1998. Testing performance and monitoring of UV systems for drinking water
disinfection. Water Supply. 16(1 /2):419-442.
2. At full-lamp power and higher UV absorption of the water IUVA. 2000. IUVAWebsite (International UltraVioletAssoclat!on). 2000. http://www.iuva.org.
by adding a UV dye until the minimum required irradiance is Miller, R., Jeffrey, W., Mitchell, D. and Elasri, M. 1999. Bacterial responses to ultravioletllght.
Am Soc Microbial. 65(8):535-541.
read from the sensor. Worobo, R. W., Churey, J. J. and Padilla-Zakour, 0. 1998. Apple cider: treatment options to
To test both sets of conditions (that is, effects of varying lamp comply with new regulations. I Assoc Food Drug Officials. December: 19-25.
Worobo, R. W. 2000. Efficacy of the ClderSure 3500 ultraviolet light unit in apple cider.
power or increasing UV absorption in the medium), a 4-log reduc Ithaca, NY. Cornell University, Department of Food Science and Technology. 1-6.
tion with proper hydraulics and a 400 J/m2 UV radiant exposure
Contacts: Randy Worobo, Ph.D., Assistant Professor. Cornell University, New
should be achieved. An ideal surrogate microorganism should have York State Agricultural Experiment Station W. North Street, Geneva, NY14456.
a 5-log reduction at 400 J/ m2. At present, such a germ is not avail Phil Hartman, PPB Inc., 2453 Canandaigua Road, Macedon, NY 14502
able. Therefore a split test with 2 different bacteria is performed.

92 JOURNAL OF FOOD 8CIEHCE-Supplement

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies

Ultrasound

DALLAS G. HOOVER

Scope of Deliverables: This section describes the uses of ultrasound in the food industry. A general theory about the
mechanism of microbial inactivation is presented. Data from inactivation of food microorganisms are scarce, and
most applications of ultrasound involve its use in combination with other preservation methods. This review points
to the need for more research on microbial inactivation in food systems when ultrasonication is used with other
methods.

1. Introduction batch operation, with temperature controlled by placement of

the sample and its container in an ice bucket, and with immer
1.1. Definition, Description and Applications sion of the sonicator probe into a small volume of cells suspend
The textbook definition of ultrasound is energy generated by ed in buffer. In an industrial food processing setting, less control
sound waves of 20,000 or more vibrations per second. Presently, of critical factors would prevent lysis efficiencies from reaching
most developments of ultrasonics (sonication) for food applica such high levels. In addition, the protective nature of foods to
tions are nonmicrobial in nature (Hoover 1997). High frequen the ultrasonic inactivation of bacterial cells or spores is quite evi
cies in the range of 0.1 to 20 MHz, pulsed operation and low pow dent when comparing results from microorganisms suspended
er levels (100 mW) are used for nondestructive testing (Gu in buffer to those present in a food system (see Section 2). The
nasekaran and Chiyungl994). Ultrasonic excitation is being ex heterogeneous nature of food with the inclusion of particulates
amined for nondestructive evaluation of the internal quality and and other interfering substances severely curtails the singular
latent defects of whole fruits and vegetables in a manner similar t1se ofultrasound as a preservation method. Although these limi
to the use of ultrasound for viewing the developing fetus in a tations make the current probability of commercial development
mother's womb (Mizrach and others 1994). Floros and Liang low, combination of ultrasound with other preservation process
(1994) noted the use oflow intensity high-frequency ultrasound es (for example, heat and mild pressure) appears to have the
for improvement of food product/process monitoring due to the greatest potential for industrial applications. Review of the liter
acceleration of diffusion. These industrial applications include ature indicates that no published information on microbial inac
texture, viscosity and concentration measurements of many sol tivation rates in foods is available. Such information is necessary
id or fluid foods; composition determination of eggs, meats, to generate kinetic data.
fruits and vegetables, dairy and other products; thickness, flow
level and temperature measurements for monitoring and control 1.4. Summary of Critical Process Factors
of several processes; and nondestructive inspection of egg shells Critical processing factors are assumed to be the amplitude of
and food packages. Floros and Liang (1994) also listed direct pro the ultrasonic waves, the exposure/ contact time with the micro
cess improvements such as cleaning surfaces, enhancement of organisms, the type of microorganism, the volume of food to be
dewatering, drying and filtration, inactivation of microorganisms processed, the composition of the food and the temperature of
and enzymes, disruption of cells, degassing of liquids, accelera treatment. When ultrasound is used in combination with other
tion of heat transfer and extraction processes and enhancement processes, then the critical process factors of these methods
of any process dependent upon diffusion. It is evident that ultra must be taken into account.
sound technology has a wide range of current and future appli
cations in the food industry. 2. Pathogens of Public Health Concern Most
Resistant to the Technology
1.2. Mechanisms of Microbial Inactivation
The bactericidal effect of ultrasound is generally attributed to
intracellular cavitation (Hughes and Nyborg 1962). It is proposed
T HE LIMITED CURRENT LITERATURE ON PROCESS EFFECTIVE
ness indicates that all pathogens should be considered resis
tant to ultrasound, especially when ultrasound is the lone pres
that micro-mechanical shocks are created by making and break ervation treatment. Particular attention should be given when
ing microscopic bubbles induced by fluctuating pressures under combining ultrasound with other methods with greater antimi
the ultrasonication process. These shocks disrupt cellular struc crobial potency, because assumed optimal conditions can result
tural and functional components up to the point of cell lysis. in higher or lower inactivation rates of target microorganisms
than expected.
1.3. Summary of Microbial Inactivation Kinetics
The use of ultrasound alone to lyse microbial cells is a well-es 2.1. Critical Process Factors When Used in
tablished laboratory method to extract intracellular components Combination with Other Treatments
(Skauen 1976). Stumpf and others (1946) published an im Survey of the literature shows that enteric gram-negative
proved ultrasonic method to disintegrate a broader range of bac pathogens have been targeted with ultrasound in perishable an
teria to obtain cell-free bacterial enzyme extracts efficiently and imal-derived foods, such as poultry and milk (Lilliard 1994). In
aseptically, acknowledging some difficulties with bacteria from these instances, the application has most often been in a liquid
genera Sarcina, Micrococcus, Acetobacter and the yeast, Saccha environment. For example, Lee and others (1989) reduced popu
romyces cerevisiae. lations of salmonellae by approximately 4-log cycles in peptone
In the laboratory, the efficiencies of lysis approach 100%; water using a 10-min treatment; however, in chocolate milk, a 30
however, such cellular disruption is conducted as a small-scale min ultrasonic treatment only lowered the number of salmonel

Supplement-JOURN~L. OF FOOD 6C1BHCB 93

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies

lae by 0.8-log cycle, suggesting that the chocolate milk offered proach until the mechanisms of inactivation are resolved. It was
significant protection against microbial inactivation. noted that MS treatment resulted in cellular disruption. D-val
Attempts have been made to reduce salmonellae attached to ues recorded for Y. enterocoliticaATCC 9610 were 1.39 min at 59
poultry skin. Lilliard (1993) studied the effects of sonicating C, 1.5 min for the highest ultrasound setting (an amplitude of
poultry in chilled baths containing chlorinated water. Reductions 150 m at 20 kHz), and 0.28 min for an MS treatment of 300 kPa
of Salmonella in the range of 2.5 to 4-log cycles were obtained and 150 .mat 30 C. The latter treatment was similar to an MTS
with a combination of immersion in chlorinated water and soni treatment at 63 C. The same authors (Raso and others 1998b)
cation compared to reductions ofless than 1-logwhen using im found that a 12-min treatment of 500 kPa and 117 .mat 20 kHz
mersion in chlorinated water alone. Sonication alone reduced the killed approximately 99% (2-log reduction) of a spore suspension
counts by only 1-1.5-log. Results were similar in the examination of B. subtilis ATCC 9372 in Mcilvaine citrate-phosphate buffer
of pre- and post-chill broiler drumsticks treated with ultrasonic (pH 7.0). The sporicidal effect of MS treatments depended upon
energy in I% lactic acid at pH 2.0 and 4.0 for 0.5, 2, and 3.5 min. the static pressure, amplitude of ultrasonic waves and the treat
After 0, 7, and 15 d, aerobic plate counts showed no significant ment temperature. Above 500 kPa, additional increments of
effect ofultrasonification (Sams and Feria 1991). pressure magnitude did not increase the amount of spore inacti
Ordofiez and others (1984) combined ultrasound of 20 kHz/ vation. In the range of70 to 90 C, combination with 20 kHz, 300
a
160 W using a cell disrupter with heating over range of 5 to 62 C kPa, and 117 m for 6 min had a synergistic effect on spore inacti
for the inactivation of Streptoccocus faecium and Streptoccocus vation. Although the authors point out the possible application
durans. They found that the combination of ultrasound and heat of MT and MTS as a preservation system for highly heat-sensi
applied together was significantly more effective in inactivating tive liquids, no food system was investigated as a test medium in
these bacteria than the 2 methods used alone. Compared to a either of these studies.
singular heat treatment, the simultaneous use of ultrasound and A focused I-MHz ultrasound transducer, capable of generat
heat reduced the populations of thermoduric enterococci ap ing a spatial peak pulse average intensity of 500 W / cm2 was used
proximately I additional log cycle. Data presented in this paper to treat culture broths of Escherichia coli containing microbub
evaluated the application using cell suspensions in 0.1 M dime bles by Vollmer and others (1998). It was found that stress re
thylglutaric acid buffer (pH 6.6). Although no food system was sponse was induced in E. coli and under some conditions, caused
tested, the authors suggested that a milk pasteurization process death. They also reported that stationary-phase cells were more
incorporating ultrasonic treatment would allow for reduction of resistant to sonication than those in exponential-phase growth
processing temperature and time. stage. The intent of the work was not the development of ultra
A subsequent work by Ordofiez and others (1987) examined a sound technology as a food preservation method, but rather to
similar application (referred to as thermoultrasonication) against study stress in bacteria and perhaps to develop the technology
survival of a strain of Staphylococcus aureus suspended in 0.05 M to treat drinking water.
phosphate buffer (pH 6.8) and UHT milk. In this work, the com The articles overviewed here demonstrate that ultrasound
bined process reduced D-values by 63% in the buffer as com lacks the power and versatility to inactivate microorganisms reli
pared to the D-values of the heat treatment alone, and by 43% ably for purposes of food preservation; however, ultrasound may
when tested in UHT milk. (These percentages represent less be used in combination with other preservation processes prima
than a I 0-fold reduction in the time in min to reduce S. aureus I rily to enhance microbial inactivation in foods. Such applications
log cfu/ml since a I-log reduction represents a 90% reduction.) will require further exploration (for example, validation studies)
Spore suspensions of Bacillus subtilis were targeted by Garcia of important synergistic effects that are relevant for industrial
and others (1989) employing thermoultrasonication in the tem use. In conclusion, ultrasound technology has the potential for
perature range of 70 to 95 C. Distilled water, glycerol and milk future use as a preservation process; however, food systems
were used as the treatment media. Ultrasound alone had no ef present a very challenging environment for ultrasound to
fect, but thermoultrasonication reduced the spore population by achieve the degree of microbial inactivation necessary for practi
63 to 73% (<I-log cycle cfu/ml) in glycerol and by 40 to 79% in cal use. At the present and probably for the next several years, its
milk. In distilled water the reductions ranged from 70 to 99.9% applications in this area are not commercially feasible. Also, an
(3-log cycle cfu/ml). The effect ofthermoultrasonication was dra important component of research that has received little notice
matically diminished as the temperature of the treatment ap with this technology is the possible effects of ultrasound (devel
proached 100 C. The optimum temperature for maximum inacti oped for food preservation purposes) on the sensory quality of
vation of spores of B. subtilis under the experimental conditions the food.
was 70 C. The mechanism for this phenomenon was unclear.
Raso and coworkers examined the response of Yersinia entero 3. Mechanisms of Inactivation
colitica and spores of B. subtilis to a combination of heat, pressure
and ultrasound. For the Y. enterocolitica study, cells were sus
pended in citrate-phosphate buffer (pH 7.0) (Raso and others
I N GENERAL, A RELATIVELY LOW NUMBER OF STUDIES EMPLOY
ultrasound for microbial inactivation. As stated above in Sec
tion 1.3, the mechanism of inactivation of vegetative bacteria ap
1998a). They used combined ultrasound and static pressures pears to be intracellular cavitation. Maximum effectiveness re
[manosonication (MS)] as well as heat/ultrasound and pressure sults in cellular lysis. For spores, the mechanism is not clear. Cavi
[manothermosonication (MTS) I against Y. enterocolitica. At ambi tation must play a role, but it is an auxiliary one since ultrasound
ent temperature and pressure, the effect of ultrasound on Y. en alone has no effect on spores. The other co-treatments have a
terocolitica was insignificant. Moderate pressures of 600 kPa did main effect in any spore inactivation. Inactivation mechanisms
not affect the survival of Y. enterocolitica to heat. Heat and ultra of ultrasound used in combination with other treatments are not
sound under pressure functioned independently. It appeared understood. Also unknown are ways to determine the occurrence
that the individual contributions of heat and ultrasound under of ultrasound-induced injury and repair, and to predict the ef
pressure to the total effect of MTS depended primarily upon the fects of process variables and post-treatment storage of food
temperature. Above 58 C, any added inactivation caused by products treated with ultrasound in combination with other inac
pressure disappeared. These results suggest that inactivation is tivation methods. In the literature, conventional plating meth
not a simple additive reaction of the 3 treatment types. Optimal ods specific for the organism under examination have been used
inactivation using these 3 methods requires a trial-and-error ap to enumerate microorganisms in studies involving ultrasound.

94 JOURNAL. Of' FOOD 6C1BHCB-Supplement

Ultrasound ...
At the current state of commercial development for purposes activation efficiency when used with other processing technolo
of food preservation, ultrasound has potential to enhance the ef gies (high pressure, heat, or others).
fectiveness of other processing methods. No mathematical mod Identification of mechanisms of microbial inactivation
el has been formulated for the inactivation of microorganisms by when used in combination with other technologies.
ultrasonic methods. Identification of critical process factors when ultrasound is
used in hurdle technology.
4. Valldation/Critical Process Factors Evaluation of the influence of the food properties, such as

S UCH IS THE CURRENT STATE OF LITERATURE REGARDING THE viscosity and size of particulates, on microbial inactivation.
application of ultrasound as a preservation process that,
qualifying, prioritizing, and quantifying its critical process fac References
tors is by assumption or implication. Factors that appear to sub Floros, J. D. and Liang, H. 1994. Acoustically assisted diffusion through membranes and
biomaterials. Food Technol. 48(12):79-84.
stantially affect the destruction of microorganisms by ultrasound Garcia, M. L., Burgos, J., Sanz, B. and Ordonez, J. A. 1989. Effect of heat and ultrasonic waves
on the survival of 2 strains ofBacillus subtilis. J Appl Bacteriol. 67:619-628.
are the amplitude of the ultrasonic waves, the exposure/contact Gunasekaran, S. and Chiyung, A. 1994. Evaluating milk coagulation with ultrasonics. Food
time with the microorganisms, the type of microorganism, the Technol. 48(12):74-78.
volume of food to be processed, the composition of the food and Hoover, D. G. 1997. Minimally processed fruits and vegetables: Reducing microbial load by
nonthermal physical treatments. Food Technol. 51(6):66-69, 71.
the temperature of treatment. When ultrasound is used in com Hughes, D. E. and Nyborg, W. L. I 962. Cell disruption by ultrasound. Science. 38: 108-l 14s.
bination with other processes, the critical process factors of these Lee, B. H., Kermasha, S. and Baker, B. E. 1989. Thermal, ultrasonic and ultraviolet inacti
vation of Salmonella In thin films of aqueous media and chocolate. Food Microbiol.
methods must be taken into account. For example, the presence 6:143-152.
of disinfectants or preservative compounds and levels of static Lillard, H. S. I 993. Bactericidal effect of chlorine on attached salmonellae with and without
soniflcation. J Food Protect. 56(8):716-717.
pressure, irradiation, or electrical energy are critical process fac Lillard, H. S. 1994. Decontamination of poultry skin by sonication. FoodTechnol. 48(12):72
73.
tors when hurdle treatment is the processing approach. Further Mizrach,A., Galilli, N. and Rosenhouse, G. 1994. Determining quality of fresh products by
maturity of ultrasonic processing in the food industry will define ultrasonic excitation. Food Technol. 48(12):68-71.
its critical process factors. Ordofiez, J. A., Sanz, B., Hernandez, P. E. and Lopez-Lorenzo, P. 1984. A note on the effect
of combined ultrasonic and heat treatments on the survival ofthermoduric streptococci.
I Appl Bacterial. 56:175-177.
5. Process Deviations Ordofiez, J. A., Aguilera, M.A., Garcia, M. L. and Sanz, B. 1987. Effect ofcombined ultrasonic
and heat treatment (thermoultrasonication) on the survival ofa strain of Staphylococcus
A S SHOWN IN THE REVIEW OF THE LITERATURE AND DUE TO THE aureus. I Dairy Res. 54:61-67.
Il.Iimited extent of research in the area, critical process factors Raso, J., Pagan, R., Condon, S. and Sala, F. J. 1998a. lnfluence of temperature and pressure
on the lethality of ultrasound. Appl Environ Micro biol. 64(2) :465-471.
and, therefore, possible process deviations are not well under Raso, J.. Palop, A., Pagan, R. and Condon, S. 1998b. Inactivation ofBacillus subtilis spores by
stood. combining ultrasonic waves under pressure and mild heat treatment. I Appl Microbial.
85:849-854.
Sams, A. R. and Feria, R. 1991. Microbial effects of ultrasonication of broiler drumstick skin.
6. Research Needs I Food Sci. 56(1):247-248.
Skauen, D.1976.A comparison of heat production and cavitation intensity in several ultra

I T IS EVIDENT FROM THIS REVIEW THAT FURTHER RESEARCH IS

needed to determine the feasibility and usefulness of ultra
sound as a food preservation method or supplementary treat
sonic cell disrupters. Ultrasonics. 14: 173-176.
Stumpf, P. K., Green, D. E. and Smith, F. W. J. 1946. Ultrasonic disintegration as a method of
extracting bacterial enzymes. J Bacterial. 51:487-493.
Vollmer, A. C., Everbach, E. C., Halpern, M. and Kwakye, S. 1998. Bacterial stress responses to
ment. The main areas to be addressed are: 1-megahenz pulsed ultrasound in the presence of microbubbles. Appl Environ! Micro
bial. 64(10):3927-3931.
Determination of the effect of ultrasound on microbial in

Supplement-JOURN~I.. Of' POOD 6C1BHCB 95

JPS SUPPLEMENT: Kinetic& of Microbial Inactivation for Alternative Food Processing Technologies

Pulsed X-rays

GUSTAVO V. 8ARB0SA-CANOVAS, DONALD W. SCHAFFNER, MERLE D. PIERSON, AND Q. HOWARD ZHANG.

Scope ofDeliverables: This section reviews current applications ofX-ray technology for food processing. The advan
tages ofX-rays over other types ofradlation are described. A study on the Inactivation of Escherichia coli, a pathogen
of concern, with pulsed X-rays In ground meat ls described. little ls known about the Inactivation kinetics when X
rays or pulsed X-rays are used for microbial Inactivation. Comprehensive research needs to be done to validate the
potential use of X-rays In food preservation.

1. Definition, Description and Applications Consequently, ultra-short, high-intensity radiation treatments

can be applied, resulting in higher local radical concentrations
1.1. X-rays and favoring radical-radical recombination reactions. This reduc
Several studies have compared the effects of electron beam, es the diffusion of radical species, which are thought to be re
gamma rays and X-rays, but comparison between these technol sponsible for undesirable effects of irradiation on food quality.
ogies is inconclusive due to differences in the doses applied Curry and others (1999) used pulsed X-rays to produce up to
(Thorne 1991). It has been suggested that there may be differ a 3-log reduction of E.coli 0157:H? in ground beef. The system
ences in the free radicals formed by these different processes consists of an X-ray accelerator with a thyristor-charging unit, a
(Taub and others 1979). Electrons have a limited penetration magnetic pulse compressor, a solid state opening switch, an elec
depth of about 5 cm in food (Josephson and Peterson 1982), tron beam diode load and an X-ray convertor (Fig. 1). The thyris
while X-rays have significantly higher penetration depths (60 tor charging unit converts 3 phase(<!>), 240V-440Vpower to di
400 cm) depending upon the energy used (Curry and others rect current. A thyristor capacitor charging circuit is used to
1999). charge the magnetic pulse compressor (Fig. 2). A 2-stage circuit
compresses and sequentially steps-up the voltage pulse before
1.2. Pulsed X-rays it is used to charge an inductive load or inductance L- as illustrat
Pulsed X-ray is a new technology that utilizes a solid state ed in Fig. 2. Energy from capacitor C3 is transferred from the in
opening switch to generate electron beam X-ray pulses of high ductive load in approximately 100 ns. Upon current reversal
intensity. The Institute of Electrophysics in Russia developed a through L-, the reverse current through the solid state-opening
novel nanosecond opening switch in the late 1980's that could
deliver power pulses in the gigawatt range, open at voltages of
100s of kV, and operate repetitively (Curry and others 1999).
Opening times range from 30 ns down to a few nanoseconds.
Repetition rates have been demonstrated up to 1000 pulses/sin
.......
......... ....
lllpV......

.....,
llldrN
....
. . . Dledt
X-Ray
c: ~
.......
X-lllyl
burst mode operation. The specific effect of pulsed in contrast to a-..
non-pulsed X-rays has yet to be investigated.
Electrically driven radiation sources that switch off when the
radiation is no longer needed are easier to incorporate into exist
ing food processing plants (Martens and Knorr 1992). In contrast,
radionuclide sources require permanent massive concrete
...,
Saaple
shielding to protect workers and the environment from their per ~

manent radiation. The practical application of food irradiation in

~
conjunction with existing food processing equipment is further
facilitated by: (1) the possibility of controlling the direction of the L-at
electrically produced radiation; (2) the possibility of shaping the Ntllnlad
llldlldaace
geometry of the radiation field to accommodate different pack
age sizes; and (3) its high reproducibility and versatility.
Potentially, the negative effects of irradiation on the food
quality can be reduced. The radionuclides Co-60 and Cs-137 are Pig. 1-Schematlc flow dlegram for puleed X-raye
produced by neutron bombardment of Co-59 and Cs-136 as a
fission fragment of a nuclear power reactor operation. They emit UOII CJ L

g-radiation of discrete energy. By contrast, the linear induction

electron acceleration (LIEA) generates broad spectrum ionizing
radiation by targeting the accelerated electron beam to collide
with a heavy metal converter plate. This plate converts the elec
tron beam in X-rays with a broad-band photon-energy spectrum.
Then, by filtering the energy spectrum of the radiation, high-en
ergy, highly penetrating radiation is produced, resulting in small
er variations in dose uniformity of food packages (Mertens and
Pig. 2-1ectr1cal clrcu" for eolld mt opening ewttch accelerator
Knorr 1992) and higher quality. LIEA can deliver dose rates many eyetem. L-ut, uturatecl Inductance; L, Inductance C1 ,2,3, capacl
orders of magnitude higher than possible with Co-60 sources. tora; T1, traneformer; 808, awttch

96 JOURH1'1.. Of' FOOD 6C1BHCB-Supplement

switch (SOS) rises to tens of kiloamperes. At current reversal, the thought to happen through 2 main mechanisms: direct interac
SOS opens 5-10 ns, generating a 220 keV pulse. The 220 keV. 500 tion of the radiation with cell components and indirect action
A, 40 ns pulse is delivered to a field emission diode. A prototype from radiolytic products, such as the water radicals H+, OH and
accelerator was constructed to operate only on X-ray mode, even eaq- (Farkas 1997). The primary target of ionizing radiation ap
though it can be operated either in the pulsed X-ray mode or pears to be chromosomal DNA, although effects on the cytoplas
electron beam mode. A convertor was installed on the accelera mic membrane may also play a role (Grecz and others 1983).
tor, and the electron beam was converted to pulsed X-rays to al Changes to chromosomal DNA and/or cytoplasmic membrane
low thick samples to be processed. can cause microbial inactivation or growth inhibition. Many stud
ies have shown that ions, excited atoms and molecules generat
2. Pathogens of Public Health Concern ed during irradiation have no toxic effect on humans.
Bremssthrahlung X-rays have been used to eliminate 99.9%
of E. coli 0157:H7 added to ground beef prior to treatment (Curry 4. Research Needs
and others 1999). A high peak rate of 101 - lQB rads/sec X-ray Research needs include:
pulses were used. The study compared X-rays with gamma rays Identifying pathogens of concern resistant to the technol
from a cobalt-60 source. Doses in the range of0.2 to 0.4 and 0.7 to ogy and validating surrogates.
0.9 KGywere used. The results showed a slighly higher inactivat Understanding mechanisms of inactivation.
ing rate (6%) per log of reduction for X-rays in contrast to gamma Understanding critical process factors and how they affect
radiation. microbial inactivation.
X-ray Irradiation has been used to eliminate Salmonella Identifying process deviations and how to correct them.
Senftenberg 775W from turkey carcass. The food was irradiat Investigating the specific effects of pulsed X-rays in con
ed using a General Electric Maxitron 300 X-ray machine, oper trast to X-rays.
ated at 300 kV peak, 20 MA with a half layer 2.8 mm copper,
delivering 268 rads/min at an effective energy of 49 kV (Teotia Gk&ary
and Miller 1975). Each carcass or drumstick was placed in the A COMPLETE LIST OF DEFINITIONS REGARDING ALL THE TECH
center of the X-ray beam to obtain as complete irradiation of flnologies is located at the end of this document.
the carcass or drumstick as possible. Each carcass or drumstick Bremsstrahlung. One of the 3 possible ways to generate X
was irradiated continuously for 2 h to give a total exposure of rays, and the one commonly used to create X-rays for food irradi
30,000 to 80,000 rads. The temperature in the X-ray room var ation. Literally translated from the German it means "breaking"
ied between 20 and 24 c. Results showed that 80,000 rads of (brems) "radiation" (strahlung). Bremsstrahlung X-rays are gen
X-ray failed to eliminate the test organism on whole turkey erated when electrons accelerate on coulomb collision with other
carcasses but reduced the test organism to an undetectable particles or when a beam of particles decelerates on encounter
level on turkey drumsticks. Each irradiated carcass or drum ing an obstacle. Synchrotron radiation or Compton scattering can
stick was aseptically transferred from its packaging to a sterile also generate X-rays.
stainless steel container. As the drumsticks or carcasses were Converter Plate. A heavy metal (usually Pb) plate that con
removed from its packaging, they were examined, and no verts an electron beam into Bremsstrahlung X-rays with a broad
change in appearance of the skin or meat was observed (Teo band photon energy spectrum.
tia and Miller 1975). LIEA. Linear Induction Electron Accelerator.
SOS. For X-rays technology, solid state opening switch. It can
3. Mechanisms of Microbial Inactivation deliver pulses in the gigawatt range.

T O INACTIVATE SURFACE AND SUBSURFACE BACTERIA, FULLY Thyristor. Charging unit used to convert 3-phase power to di
packaged foods are sterilized by X-ray treatment (Brynjolfs rect current.
son 1979). X-ray treatment reduces or eliminates Salmonella se
rovars in poultry, mold growth on strawberries, and sprout devel References
opment in potatoes. Salmonella serovars have been found to be Brynjolfsson,A.1979.
10.
Food irradiation and nutrition. The Professional Nutritionist.11(4):7

the most radiation sensitive of all pathogenic organisms on foods Curry, R.. Unldesbay, N., Clevenger, T., Brazos, B., Mesyats, G. and Filatov, A. 1999. The effect
(Teotia and Miller 1975). As a method of food preservation, X-ray of high doses rate X-rays on E.coli 0157:H7 in ground beef. IEEE on Plasma Science. in
print.
treatment has low energy requirements. Farkas, J. 1997. Physical methods of food preservation. Food Microbiology. Fundamentals
Radionuclides emit gamma radiation with discrete energy and Frontiers. M.P. Doyle, L.R. Beauchat, T.J. Montville(eds.). Washington, D.C. ASM
Press. 497-519.
levels (1.17 MeV and 1.3 MeV for Co-60 and 0.67 MeV for Cs-137), Josephson, E.S. and Peterson, M.S.(Eds.) 1982. Preservation of food by ionizing radiation.
while X-ray spectra (from a 5 MeV electron accelerator) have Manens,I. ll, III. CRC Press. Boca Raton, FL.
B. and Knorr, D. 1992. Developments of nonthermal processes for food preserva
broad energy distributions spanning the same general energy tion. Food Technol. 46(5):124, 126-133.
levels (Martens and Knorr 1992). Given these overlapping energy Taub, I. A., Kaprielian, R. A., Halliday, J. W., Walker, J.E., Angelini, P. and Merrit Jr, C. 1979.
Factors affecting radiolytic effects in food. Radiated Physical Chemistry. 14:639-653
distributions, it is reasonable to assume that mechanisms for mi Teotia, J. S. and Miller, B. F. 1975. Destruction ofsalmonellae on poultry meat with lysozyme.
crobial inactivation are also similar. EDTA, X-ray, microwave and chlorine. Poul Sci. 54: 1388-1394.
Thome, S.(Ed.J 1991. Food Irradiation. Elsevier Applied Science. London.
Microbial inactivation by all types of ionizing radiation is

Supplement-JOURH1'L Of' POOD 9C1BHCB 97

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies

Research Needs1

DENNIS R. HELDMAN AND FRANK F. BUSTA

All Technologies ture and electric fields on the inactivation kinetics of key patho
Evaluate the adequacy of the linear first-order survivor genic microorganisms.
curve model. Although there is evidence of various types of devi Develop the knowledge base to assess the impact of devia
ations from this historical model, a universally accepted alterna tions for specific designs of ohmic heaters, including improved
tive has not evolved. Future research on an appropriate model(s) models for ohmic processes.
would be beneficial to all preservation technologies.
Establish experimental protocol for obtaining statistically Microwave
reliable kinetic parameters to describe survivor curves for micro Determine the effects of food formulation on heating pat
bial populations exposed to various alternative technologies, es terns and assess their impact on overall process effectiveness.
pecially pulsed electric fields, pulsed light, oscillating magnetic Determine the effects of equipment design factors, in
fields and X-rays. For example, PEP studies should incorporate cluding frequency (for example, 915 MHz is sometimes proposed
multiple levels of electric field intensity, as well as test the poten instead of the commonly used 2450 MHz for better uniformity of
tial for synergy with temperature. heating).
Identify differences of inactivation action/mechanism(s) Develop variable frequency ovens and assess their useful
among alternative technologies. For example, pulsed light and ul ness in food applications for improved uniformity of heating.
traviolet light, ohmic and microwave, PEP and thermal, and so on. Understand the factors affecting heating patterns, includ
Determine the synergism or antagonism of one alternative ing qualitative changes occurring with frequency changes.
process used with another and their combined effect on microbi Develop ways to monitor and real-time adjust for process
al inactivation efficiency. deviations in microwave and radio frequency processing.
Determine potential formation of unpalatable and toxic
by-products of processing with alternative technologies. Pulsed Light
Develop methods for measuring and monitoring tempera Determine the suitability of the technology for solid foods
tures or other treatment actions within individual, large, solid and non-clear liquids where penetration depth is critical.
particulates. Quantitatively determine the resistance of common patho
Identify new or changing critical process factors and their gens or surrogate organisms to pulsed light treatments.
effect on microbial inactivation. Understand the differences between this technology and
Investigate the influence of pressure on reduction of mi that of the more conventional UV (254 nm) light treatment.
crobial populations using the proper experimental design (statis Determine the mechanisms of microbial inactivation to
tically valid, collection of data at different pressures and control determine whether they are significantly different from those
of temperature and product), so that z(P) and/or activation vol proposed for UV light.
umes (V) are quantified. Synergistic effects among pressure, Understand the mechanism and quantification of the
temperature, and other measurable variables also should be benefit attributed to the pulse effect.
evaluated.
Ultrasound
Pulsed Electric Fields Determine the effect of ultrasound on microbial inactiva
Develop reliable kinetic parameters for the microbial inac tion efficiency when used with other processing technologies
tivation models using PEP for the microbial population of inter (high pressure, heat or others).
est in food safety. Develop and evaluate the subsequent kinetic Identify the mechanisms of microbial inactivation when
models. used in combination with other technologies.
Determine mechanisms of microbial and enzyme inactiva Identify the critical process factors when ultrasound is
tion by PER used in hurdle technology.
Identify the pathogens of concern most resistant to PER Evaluate the influence of the food properties, such as vis
Identify surrogate microorganisms for these pathogens. cosity and size of particulates, on microbial inactivation.
Develop validation methods to ensure microbiological ef
fectiveness of PER High Voltage Arc Discharge
Conduct studies to optimize critical process factors identi Determine how delivery of highly reactive ozone and UV
fied with PER radiation by electric arc discharge inactivates microorganisms.
Design PEP treatment chambers for uniformity and pro Quantify the inactivation kinetics and mechanisms.
cessing capacity. Identify process by-products generated during the sub
Develop PEP electrode materials for longer operation time merged arc discharge process due to the highly reactive nature of
and lower metal migration. ozone and UV irradiation.
Design, evaluate and reduce costs of process systems. Define maximum allowable dose similar to food irradiation.

Ohmic and Inductive Heating Oscillating Magnetic Fields

Investigate more fully the combined influence of tempera Establish the effects of magnetic fields on microbial inactivation.

98 JOURH1'L.. Of' FOOD SCIENCE-Supplement

 Elucidate the destruction kinetics of magnetic fields. up times. Although HPP-derived semi-logarithmic survival
Determine the mechanism of action of magnetic fields. curves appear nonlinear (for example, sigmoidal or biphasic), in
Determine critical process factors and effects on microbial
HPP predictive microbiology, a logarithmic order of reduction is
inactivation. normally assumed. This assumption carries the danger ofunder
Validate the process and evaluate the need for indicator estimating the subpopulation of pressure-resistant organisms.
organisms. Investigate the influence of pressure on reduction of mi
Identify process deviations and determine ways to ad crobial populations using the proper experimental design (statis
dress them. tically valid, collection of data at different pressures and control
of temperature and product), so that kinetic parameters are
Ultraviolet Light quantified. In this way, critical process factors can be evaluated
Quantitatively determine the effects of individual param for survival of pathogens or surrogates in a statistical manner. Ac
eters, such as suspended and dissolved solid concentration, on curate predictions could be used to develop HACCP plans.
the effectiveness of the treatment. Evaluate synergistic effects among pressure, temperature
and other variables.
High Pressure
Conduct additional modeling research, using data gener
'authors collected and summarized the research needs from the report.
ated by multiple-cell pressure units that allow for similar come-

Supplement-JOURN1'L OF FOOD SCIENCE 99

JPS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood ProceHlng Technologies

Glossary

Activation energy constant, E. Temperature coefficient deter band photon energy spectrum.
mined from the slope of a In (kl versus l /TA plot. Critical process factor. Any specified process condition and
Activation volume constant, V. Pressure coefficient obtained specified limit (see process deviation) required to achieve a de
from the slope of the In (kl versus a pressure difference (P-PR) plot. sired/ specified residual level of activity of a specified pathogen.
Adiabatic compression. Compression or decompression pro For instance in HPP critical process factors can include, but not
cesses occurring without heat transfer. be limited to, process pressure, product IT, process temperature,
Bacteriophage. A bacterial virus; a virus capable of infecting pH, Aw, product composition, compression time, and process
bacteria. pressure hold time.
Batch treatment. Treatment of a static mass of food in bulk or Cross-field. An ohmic heating system where the electric field
packaged. is aligned across the product flow path.
Biological indicator system. A system (bacteria or enzyme) Cyclotron. An accelerator in which particles move 11'J spiral
used to determine whether a process cycle has met the specified paths in a constant.
requirements. Cyclotron resonance. Phenomenon that occurs when the fre
Bremasstrahlung. One of the three possible ways to generate quency of revolving ions induced by a specific magnetic field in
X-rays, and the one commonly used to create X-rays for food irra tensity is similar to the frequency of that magnetic field and par
diation. Literally translated from the German it means "break allel to it. In these instances, energy may be transferred to the
ing" (brems) "radiation" (strahlung). Bremsstrahlung X-rays are ions, affecting cell metabolic activities.
generated when electrons accelerate on coulomb collision with O.C. power supply. Electrical device to deliver direct current
other particles or when a beam of particles decelerates on en to the capacitor bank
countering an obstacle. Synchrotron radiation or Compton scat Decompression time. Recorded time to bring a mass of food
tering can also generate X-rays. from process pressure to 37% of process pressure. If decompres
Broad spectrum light. For pulse light technology, it refers to sion time is 0.5% or less of process pressure hold time it may be
ultraviolet, visible, and infrared spectrum oflight. neglected in process determination calculations (seconds).
Capacitor bank. Network of two or more capacitors used to Density. Mass per unit volume of a material.
store the energy supply from a DC power source. Dielectric constant. Property of a material representing the
Cavity. The metallic enclosure in the microwave system where ability to store electromagnetic energy.
the microwaves coming from the waveguide do the heating. Dielectric loss. Property of a material representing the ability
Cell lysis. The rupturing of a bacterial cell. to dissipate electromagnetic energy as heat.
Chemical indicator system. A system using calibrated chemi Dipole. For oscillating magnetic fields, a magnetic particle
cal agents (one type of which changes color as a function of time that contains a "north" and "south" magnetic pole.
and temperature of exposure to heat) to determine whether a 0-value, decimal reduction time. Time required for a one-log
process cycle has met the specified requirements. cycle reduction in the microbial population, at a specific temper
Co field flow. One possible configuration for a PEF continuous ature, pressure, or electric field intensity. For the D-value to be
chamber meaningful, the semi logarithmic survivor curve must be a
Compression time. Recorded time to bring a mass of food straight line.
from 0.1 MPa to process pressure (s). Electric field intensity, E. A force on a stationary positive
Conductivity (Electrical), a. Physical property of a food mate charge per unit charge in an electrical field. For ohmic heating
rial that determines its ability to conduct electricity and is ex and PER this can be calculated in an average sense as the voltage
pressed in Siemens per cm (Siem). In ohmic heating, it enables divided by the distance between the electrodes.
heating to occur. Electric field strength. See electric field intensity
Conductivity (Thermal). Physical property of a food material Electrical breakdown. An abrupt rise in electric current in the
which determines its ability to conduct heat. Expressed in Watts/ presence of a small increase in voltage. As a consequence, rup
meterC. ture of bacterial cell membranes may occur with the application
Continuous chamber. Opposite of static chamber, it processes of an electric field. This effect is more pronounced in pulsed elec
liquid foods that are pumped between pulsing electrodes. tric field treatment. In microwaves, this can happen if operating
Continuous HPP process treatment. Treatment of liquiform at very low pressures, as in freeze-drying.
products using a hold chamber designed to insure every food el Electrode gap. Distance (cm) between the inner and outer
ement receives a specified residence time at process pressure electrode.
(and temperature) with subsequent means for the product to do Electroheatlng. See ohmic heating
work during decompression followed by aseptic or clean filling of Electrohydraulic treatment. A rapid discharge of high voltage
packages. electricity across an electrode gap below the surface of aqueous
Conventional heating. Heating of a substance by transfer of suspensions.
thermal energy from a heating medium to a low temperature Electroporation. Phenomenon in which a microbial cell ex
product. posed to high voltage electric field pulses temporarily destabiliz
Converter Plate. A heavy metal (usually Pb) plate that con es the lipid bilayer and proteins of cell membranes.
verts an electron beam into Bremsstrahlung X-rays with a broad Energy density or fluence. Energy delivered from a light

100 JOURNAL. Of' FOOD SCIENCE-Supplement

Glossary ...
source per unit area (Joules/ cm2). safety but with modest impact on the nutritional properties and
Focussing. Concentration of electromagnetic waves inside a flavor of the product. Traditionally, this term has been applied to
food due to its curved surface, much like a lens focussing light thermal processes but it can also refer to emergent alternative
waves. It leads to enhanced heating at the interior. technologies with the purpose of pathogens inactivation.
Gyrofrequency. Frequency at which the ions revolve in a mag Peak voltage. Maximum voltage (kV) delivered by PEF system.
netic field. Penetration depth. The distance the electromagnetic waves
Heterogeneous magnetic fields. Magnetic field that exhibits a (of a certain frequency) travel in a material before it loses 63% of
gradient depending on the nature of the magnet its energy.
High pressure processing (HPP). Adiabatic compression, Power cycling. The process of the microwave source turning
hold, and decompression of foods at pressures in the range of on and off.
100 to 800 MPa for hold times of0.001 to 1200 seconds or longer. Process deviation. Any critical process factor which differs
High voltage electrical impulse. Application of high voltage outside an specified value and limit or range limit during the
discharges to a liquid medium in a very short time. treatment and subsequent handling of a treated food.
High voltage switch. Device used to trigger the delivery of Process pressure (PP). Constant holding pressure for any
high intensity light pulses to foods or packaging materials. HPP treatment (MPa) (psi). Process pressure should be con
Homogeneous magnetic fields. Magnetic field with a constant trolled to 0.5% and recorded to the same level of accuracy.(
strength over space. 500 psi at 100,000 psi) or( 3.4 MPa at 680 MPa).
Homogeneous material. Material which does not exhibit spa Process pressure hold time. Recorded time from end of com
tial variation in composition pression to beginning of decompression (s).
Inclusion particle. A food particle of significantly different Product composition. Specified percent by weight and range
electrical conductivity than its surroundings. limit of stated product ingredients (%).
Inhmogeneous material. Material which exhibits spatial vari Product initial temperature (IT). Product IT can be specified
ation in composition as a critical process factor. For HPP processes, IT must be not less
In-line field. An ohmic heating system where the electric field than 0.50 C below value-value in all food locations from start of
is aligned along the product flow path. compression time to end of decompression time (C).
Input voltage. Voltage (kV) supplied from a DC power source. Product pH. Value of pH measured at product IT at atmo
Intensifier. Device for delivering high pressure process liquid spheric pressure.
generally by using a large diameter low pressure piston to drive a Product process temperature. Temperature at which the pro
small diameter high pressure piston. The ratio of intensification cess is performed (C). Initial temperature and process tempera
is directly proportional to the ratio of the area of the large diame ture must be monitored at all points of the process if it is an inte
ter piston divided by the area of the small diameter piston. A gral condition for microbial inactivation. With some processes,
20: 1 intensification ratio is common. The pressure in the low such as HPP, foods will increase in temperature as a function of
pressure cylinder may be used to estimate the pressure of the the imposed treatment and their composition. Final product
high pressure process liquid. Intensifiers may be operated as temperature at process pressure is independent of compression
single or multiple stroke devices. Single stroke intensifiers may rate as long as heat transfer is negligible.
be used to control the decompression rate of an HPP system. Pulse rate. Number of pulses per second or input frequency
Internal energy generation. Heat generation within a materi (1/s).
al and throughout its volume due to the presence of an energy Pulse width. Duration of the pulse. In PEF and for exponen
source that is dissipated throughout the volume (see also volu tial decaying pulse, pulse width can be calculated as the resis
metric heating). tance of the food times the capacitor capacitance. This is also
Interstitial fluid motion. The motion of fluid in the spaces be called time constant.
tween solid particles. Pulsed treatment. Treatment of a food using more than one
Irreversible breakdown. Irreversible generation of pores in treatment cycle of specified conditions such that each cycle ele
the bacterial cell membranes. ment is accurately and precisely reproduced until a specified
k, reaction rate constant (first-order). The slope of the loga number is achieved. Cycle parameters (i.e. pressure, electrical
rithm of survivor ratio (log S) versus time of treatment for the mi field) may display a square, ramp, sinusoidal, or other waveform
crobial population. when recorded.
UEA. Linear Induction Electron Accelerator Radio frequency. Electromagnetic waves at frequencies of
Liquid crystals. Materials, which have properties that are use 13.56, 27.12, and 40.68 MHz.
ful for thermal sensing. Liquid crystals typically change color Rate of inactivation or survival ratio, S. Initial number of via
with temperature. ble microorganisms (N 0 ) divided by the number survivor micro
Magnetic flux density. Force that an electromagnetic source organisms after treatment (N).
exerts on charged particles. Magnetic flux density is measured in Residence time distribution. The distribution of times spent
Telsa (1 Telsa =104 gauss). by the various components of a food product through a process
Magnetron. The physical component of a microwave system vessel.
that generates the microwaves. Resonance. Electromagnetic wave patterns formed due to su
Microwaves. Electromagnetic waves at frequencies 915, 2450, perposition of oncoming and reflected waves, leading to very
5800, and 24225 MHz. high rates of heating. Resonance can occur inside a food for spe
Non-thermal effects. Effects due to the exposure to a process cific combinations of size, shape, and food property.
that are not of thermal origin, i.e., cannot be explained by mea Reversible breakdown. Formation of reversible pores in the
sured temperature changes. bacterial cell membranes.
Osclllating magnetic fields. Magnetic fields generated with Runaway heating. A cycle of increasing temperature in food
electromagnets of alternating current. The intensity varies period causing increasing rate of enegy (microwave/ ohmic) absorption
ically according to the frequency and type of wave in the magnet. that further increases the rate of temperature rise. It is more
Pasteurization. A process designed to reduce the population prominent in foods undergoing phase change from ice to water
of pathogenic bacteria in a product, sufficient to ensure product and in foods containing significant salt and other ions.

Supplement-JOURNAL OP FOOD SCIBHCB 101

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food ProceHlng Technologies
Semi-continuous HPP. Treatment ofliquiform products using duct heat), specific heat (the ability of the material to store heat),
one or more chambers fitted with a free piston to allow compres and density (the mass per unit volume of the material).
sion, hold, and decompression with discharge under clean or Thyristor. Charging unit used to convert three-phase power
sterile conditions. to direct current.
Sinusoidal wave. A mode of propagation of the magnetic Treatment time. Time that a food product is subjected to a
field. process. For instance in PEP. it is calculated as the product of the
SOS. In X-rays technology, solid state opening switch that can number of pulses times the duration of the pulses.
deliver pulses in the gigawatt range. Ultrasonic. Term used to describe a vibrating wave of a fre
Speclflc heat. The ability of a material to store heat. Described quency above that of the upper frequency limit of the human
technically as the amount of energy required to raise the tem ear; it generally embraces all frequencies above 16 kilocycles/
perature of unit mass of an object by a unit increment in temper second.
ature. Variable frequency. Sweeping over a range of frequencies
Static chamber. Chamber that processes a given volume of during the microwave heating process to improve uniformity.
food at a time. Volumetric heating. Heating by internal energy generation
Static magnetic field. Magnetic fields that have constant in throughout the volume of a material (see also internal energy
tensity (Bl over time and whose field direction is constant. The generation).
intensity varies periodically according to the frequency and type Water Activity, 8w. Qualitatively, 8w is a measure of unbound,
of wave in the magnet. free water in a system, available to support biological and chemi
Sterilization. Any process, physical or chemical, which will de cal reactions. Water activity affects microorganisms survival and
stroy all forms of life; applied especially to microorganisms, includ reproduction, enzymes, and chemical reactions. The water activi
ing bacterial and mold spores and the inactivation of viruses. ty of a substance is quantitatively equal to the vapor pressure of
Surrogate Microbe. A non-pathogenic species and strain the substance divided by the vapor pressure of pure water (both
responding to a particular treatment in a manner equivalent measured at the same temperature).
to a pathogenic species and strain. The surrogate allows bio Waveform/Waveshape. Type of electric or pressure pulses
logical verification of the treatment without introducing generated by the high voltage pulser.
pathogens into a food processing area. For example, PA 3679 is Waveguide. The physical component of a microwave system
used as a surrogate microbe for Clostridium botulinum in ther that guides the microwaves from magnetron to the cavity where
mal process validation. Listeria innocua is a possible surrogate the food is heated. When applied in the form of pulses, it revers
for L. monocytogenes. es the charge for each pulse and pulse intensity gradually de
Tesla. Unit to express magnetic flux density (B). 1 Tesla (T) = creases.
104 gauss. z(T) [z(P) or z(E)]. Thermal (pressure or electric field) resis
Thermophysical properties. Properties that influence the tance constant (z) is the temperature (C) (pressure or electric
heating rate of a material. Examples of thermophysical proper field) increase needed to accomplish a one-log cycle reduction in
ties are thermal conductivity (the ability of the material to con the D-value.

102 JOURNAL. OF POOD SCIBNCB-Supplement

.JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies

References

Adegoke, G. O., lwahashi, H. and Komatsu, Y. 1997. Inhibition ofSaccharomyces cerevislae Buchanan, R. L. 1997. Identifying and controlling emerging food borne pathogens: research
by combination of hydrostatic pressure and monoterpenes. I Food Sci. 62(2): 404-405. needs. Emerging Infectious Diseases. 3(4):517 -521.
Akiyama, H. 2000. Otsuka Chemical Co.. Ltd., 463 Kagasuno Kawauchi. CHO, Tolcushima 771 Buffier, C.R. 1993. Microwave cooking and processing: Engineering fundamentals for the
0193 Japan (contact: Phone 0886-65-6672; Email: [email protected]). food scientist. Van Nostrand Reinhold. New York.
Alderton, G. and Snell, N. 1969. Bacterial spores: Chemical sensitization to heat. Science. Burfoot, D., Griffin, W. J. and James, S. J. 1988. Microwave pasteurization of prepared meals.
163:1212. Journal of Food Engineering. 8:145-156.
Aldenon, G., lto, K. A. and Chen, J. K. 1976. Chemical manipulation of the heat resistance of Burfoot, D., Rallton, C. J., Foster, A. M. and Reavell, R. 1996. Modeling the pasteurization of
Clostridlum botulinum spores. Appl Environ Mlcroblol. 31:492-498. prepared meal with microwaves at 896 MHz. I Food Eng. 30:117-133.
Aleman, G. D., Farkas, D. F., McIntyre, S., Torres, J. A. and Wilhelmsen, E. 1994. Ultra-high Bunon, H. 1949. A survey of literature on bacterial effects of shon electromagnetic waves.
pressure pasteurization of fresh cut pineapple. I Food Protect. 57(10):931-934. Shlnfleld, England. National Institute for Research In Dairying Shinfield. N. I. R. D. Paper
Aleman, G. D.. Ting, E. Y.. Mordre, S. C., Hawes, A. C. 0 .. Walker, M., Farkas, D. F. and Torres, No.1041.
J. A. 1996. Pulsed ultra high pressure treatments for pasteurization of pineapple Juice. I Butz, P., Trangott, V., Ludwig, H., Ries, J. and Weber, H. 1990. The high pressure Inactivation
Food Sci. 61(2):388-390. of bacteria and bacterial spores. Die Pharrn Ind. 52:487-491.
Allen, M. 1969. Electrohydrauilc process for producing antigens. U.S. Patent 3,445,566. Butz, P., Hablson, G. and Ludwig, H. 1992. lnOuence of high pressure on a lipid-coated virus.
Alpas, H., Kalchayandand, N., Sikes, T., Dunne, C. P. and Ray, B. 1994. Hydrostatic pressure R. Hayashi, K. Here mans and P. Masson(eds.). High Pressure and Biotechnology. London.
among strains of foodborne pathogens. Applied and Environmental Microbiology. John Ubby & Co.. Ltd. 61-64.
65(9):4248-4251. Butz, P., Funtenberger, S., Haberdltzl, T. and Tauscher, 8. 1996. High pressure Inactivation of
Ananth, V., Dickson, J. s.. Olson, D. G. and Murano, E. A. 1998. Shelf-life extension, safety and Byssochlamys nlvea ascospores and other heat resistant moulds. Lebensm Wiss Technol.
quality of fresh pork loin treated with high hydrostatic pressure. I Food Protect. 29:404-410.
61 (12):1649-1656. Calderon-Miranda, M. L. 1998. Inactivation oflisterla inocua by pulsed electric fields and
Anantheswaran, R. C. and Liu, L. Z. 1994a. Effect of viscosity and salt concentration on nlsln. Pullman, WA. Washington State University.
microwave heating of model non-Newtonian liquid foods in cylindrical containers. I Carlez, A., Cheftel, J.C., Rosec, J.P., Richard, N., Saldana, J. L. and Balny, C. 1992. Effects of
Microwave Power Electromagnetic Energy. 29:127. high pressure and bacteriostatlc agents on the destruction of citrobacter freundll in
Anantheswaran, R. C. and Liu, L. Z. 1994b. Effect of shielding on Dow proOles in water In a minced beefmuscle. C. Balny, R. Hayashi, K. Heremansand P. Masson(eds.). High Pressure
cylindrical container during microwave heating. J Microwave Power Electromagnetic and Biotechnology. London, U.K. John Libby & Co., Ltd. 365-368.
Energy. 29( 4):220. Carlez, A., Rosec, J.P., Richard, N. and Cheftel, J.C. 1994. Bacterial growth during chilled
Anderson, W. A., McClure, P. J., Baird-Parker, A. C. and Cole, M. B. 1996. The application of storage of pressure-treated minced meat. Lebens Wiss Technol. 27:48-54.
a log-logistic model to describe the therrnal Inactivation ofclostrldlum botullnum at 213B Carpi, G., Buzzonl, M .. Gola, S., Maggi, A. and Rovere, P. 1995. Microbial and chemical shelf.
at temperatures below 121-1 degrees C'. I Appl Bacterial. 80:283-290. life of high-pressure treated salmon cream at refrigeration temperatures. lndustria Con
Anonymous. 1980. The potential of Bach. Food Manuf. 55(10):53. serve. 70:386 397.
Anonymous. 1989. Canned Foods: principles ofthermal process control, acidification and Carsberg, H. 1999. Sanitation: It's a small world. Food Quality. Jan/Feb:61-62.
container closure evaluation. Washington, DC. The Food Processors Institute. Fifth Casasnovas, J.. Anantheswaran, R. c.. Shenk, J. and Purl, V. M. 1994. Thermal processing of
Edition. food packaging waste using microwave heating. I Microwave Power Electromagnetic
Anonymous. 1996. Sterillzatlon surfaces by Irradiation with microwaves. NASA Tech Briefs. Energy. 29: 171.
140. Castro, A. J. 1994. Pulsed electrical field modification ofactlvlty and denaturation ofalkaline
Anonymous. 1996. Thermal processes for low-acid foods In metal containers. Washington, phosphatase. Food Science and Human Nutrition. Pullman, WA. Washington State Uni
DC. National Food Processors Association. Bulletin 26-L 72-85. versity.
Anonymous. 1999. Micro Denshl Co.. Ltd., No. 8-25, 2-Chrome Yoshinodal, Kawagoeshl, Castro, A. J., Barbosa-Canovas, G. V. and Swanson, B. G. 1993. Microbial inactivation offoods
Saitama 350, Japan. by pulsed electric fields. I Food Process Pres. 17:47- 73.
Anonymous. 1999. U.S. food & drug administration center for food safety and & applied CDC. 1998. Update: Multlstate outbreak of llsteriosis-United States, 1998-1999. MMWR.
nutrition foodborne pathogenic microorganisms and natural toxins handbook [Bad Bug 47:1117-1118.
Book[. 2000. http://vm.cfsan.fda.gov/llst.html. CDC. 1999. Incidence of foodborne Illnesses: preliminary data from the food borne diseases
Anonymous. 1999. UV light provides alternative to heat pasteurization of juices. Food Tech active surveillance network [Foodnet]-Unlted States, 1998. MMWR. 48:189-194.
noi. 53(9):144. CDC. 2000. Surveillance for food borne disease outbreaks-U nlted States, 1993-1997. Morbid
Arabshahi, A. and Lund, D. B. 1985. Considerations in calculating kinetic parameters from lty and Mortality Weekly Repons. 49: 1-51.
experimental data. I Food Process Eng. 7:239-251. Chang, J.C. H., Ossoff, S. F., Lobe, D. C., Dorfman, M. H., Dumais, C. M., Qualls, R. G. and
Arroyo, G., Sanz, P. D. and Prestamo, G. 1997. Effect of high pressure on the reduction of Johnson, J. D. 1985. UV inactivation of pathogenic and indicator microorganisms. Appl
microbial populations In vegetables. I Appl Microbiol. 82:735-742. Environ! Microbial. 49: 1361-1365.
Ball, C. 0. and Olson, F. C. W. 1957. Sterillzatlon In Food Technology. McGraw-HIii Book Cheftel, J.C. 1992. Effects of high hydrostatic pressure on food constituents: An overview.
Company. NewYork. C. Balny, Hayashi, R., Heremans, K.. Masson, P. High Pressure Blotechnol. 224. 195-209.
Ballestra, P., Da Sliva, A. A. and Cuq, J. L. 1996. Inactivation of Escherichia coli by carbon Cheftel, J.C. 1995. Review: high pressure, microbial Inactivation and food preservation.
dioxide under pressure. J Food Sci. 61 (4):829-836. Food Sci Technol lnt. 1(2/3):75-90.
Barbosa-Canovas, G.V., Pothakamury, U.R., and Barry, G.S. 1994. State of the art technologies Chen, C. and Tseng, C. W. 1997. Effect of high hydrostatic pressure on the temperature
for the stablllzatlon of foods by non-therrnal processes: physical methods. In: Barbosa dependence ofSaccharomyces cerevisiae and Zygosaccharomyces rouxli. Proc Biochem.
Canovas, G.V., and Welti-Chanes, J.(eds.), Food Preservation by Moisture control. Lan 32(4):337-343.
caster, Technomlc Publishing.pp. 423-532. Chipley, J. R. 1980. Effects of microwave Irradiation on microorganisms. Adv Appl Micro biol.
Barbosa-Canovas, G. V., Palou, E.. Pothakamury, U. R. and Swanson, B. G. 1997. Application Academic Press Inc. 26. 129-145.
oflight pulses in the sterilization of foods and packaging materials. Nontherrnal Preser Chiu, C. P., Tatelshi, K., Kosikowsk.i, F. V. and Armbruster, G. 1984. Microwave treatment of
vation of Foods. Chapter 6-139-161. Marcel Dekker. New York. pasteurized milk. I Microwave Power. 19(4):269-272.
Barbosa-Canovas, G.V., Gongora-Nieto, M.M., and Swanson, B.G. 1998. Nonthermal electrl Cho, H. Y., Sastry, S. K. and Yousef, A. E. 1996. Growth kinetics of Lactobacillus acidophllus
cal methods In food preservation. Food Sci. Int. 4(5):363-370. under ohmic heating. Biotechnol Bioeng. 49(3):334-340.
Barbosa-Canovas, G. V., Gongora-Nieto, M. M., Pothakamury, U. R. and Swanson, B. G. 1999. Cho, H.-Y.. Sastry, S. K. and Yousef, A. E. 1999. Kinetics of Inactivation of Bacillus subtllis
Preservation of foods with pulsed electric Oelds. 1-9, 76-107, I 08-155. Academic Press Ltd. spores by continuous or interrnittent ohmic and conventional heating. Biotechnol Bloeng.
London. 62(3):368-372.
Bassani, M. 1999. Personal communication. Mlcromac Systems. Clouston, J. G. and Wills, P.A. 1969. Initiation of germination and Inactivation of Bacillus
Beattle, M. and Lewis, F. C. 1925. The electric current (apart from the heat generated) A pumllus spores by hydrostatic pressure. I Bacterial. 97:684-690.
bacteriological agent in the sterilization of milk and other fluids. I Hyg. 24: 123. Coughlan, A., Hall, N. 1990. How magnetic field can influence your ions? New Scientist.
Bengtsson, N. E. and Green, W. 1970. Radio-frequency pasteurization of cured hams. I Food 8(4):30.
Sci.35:681-687. Crawford, Y. J., Murano, E. A., Olson, D. G. and Shenoy, K. 1996. Use of high hydrostatic
Benito, A., Ventoura. G., Casadei, M .. Robinson, T. and Mackey, B. 1999. Variation in resis pressure and irradiation to eliminate Clostrldium sporogenes in chicken breast. I Food
tance of natural Isolates of Escherichia coll O 157 to high hydrostatic pressure, mild heat, Protect. 59:711-715.
and other stresses. Appl Environ Mlcrobiol. 65(4): 1564-1569. Cross, G. A. and Fung, D. Y. C. 1982. The effect of microwaves on nutrient value of foods. CRC
Berlin, D. L., Herson, D.S., Hicks, D. T. and Hoover, D. G. 1999. Response of pathogenic vibrio Crlt Rev Food Sci Nutr. 16:355-381.
species to high hydrostatic pressure. Appl Environ Mlcrobiol. 65(6):2776-2780. Culk.in, K. A. and Fung, D. Y. C. 1975. Destruction ofEscherlchla coll and Salmonella typh
Bernhardt, H. 1994. Desinfektlon aufbereiteter oberOachenwasser mlt UV-Strahlen. Wasser lmurlum In microwave-cooked soups. I Milk Food Technol. 38(1):8-15.
Abwasser. 135(12):677-689. Curry, R., Unk.iesbay, N .. Clevenger, T.. Brazos, B., Mesyats, G. and Fllatov, A. 1999. The effect
Bolton, I. R. 1999. Ultraviolet Applications Handbook. Bolton Photosciences, Inc. Ayr, ON, of high doses rate X-rays on E. coll 0157:H7 in ground beef. IEEE on Plasma Science. in
CA.NOB IEO. print.
Brauch, G., Haensler, U. and Ludwig, H. 1990. The effect of pressure on bacteriophages. High Datta, A. K. 1991. Mathematical modeling of microwave processing as a tool to study safety.
Pressure Res. 5:767 769. American Society for Agricultural Engineers Paper 91-6614.
Bridgman, P. W. 1912. Watern in the liquid and five slold forms under pressure. Proc Amer Datta, A. K. 1992. Error estimates for approximate kinetic parameters used In food literature.
Acad An Sci. 47:441-558. I Food Eng. 18:181-199.
Brynjolfsson, A. 1979. Food irradiation and nutrition. The Professional Nutritionist. 11(4):7-1 O. Datta, A. K. and Hu, W. 1992. Quality optimization of dielectric heating processes. Food

Supplement-JOURNAL. OF FOOD SCIENCE 103

JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Processing Technologies
Technol. 46(12):53-56. Garcia-Graells, V., Hauben, E. J. A. and Michleis, C. W. 1998. High-pressure inactivation and
Datta, A. K. and Liu, J. 1992. Thermal time distributions for microwave and conventional sublethal Injury ofpressure-resistant Escherichia coll mutants in fruit juices. Appl Environ
heating of food. Trans I Chem E. 70(CJ:83-90. Microbiol. 64:1566-1568.
Datta, A. K., Sun, E. and Solis, A. 1994. Food dielectric property data and its composition Gaskova, D., Sigler, K., Janderova, 8. and Plasek, J. 1996. Effeck ofhigh-voltage electric pulses
based prediction. M.A. Rao and S.S. H. Rizvi(eds.). Engineering Propenies of Food. New on yeast cells: Factors influencing the killing efficiency. Bioelectrochem Bioenergetics.
York. Marcel Dekker. 457-494. 39:195-202.
Datta, A. K. 2000. Fundamentals of heat and moisture transpon for microwaveable food Gerencser, V.F., Barnothy, M.F., and Barnothy, J.M. 1962. Inhibition of bacterial growth by
product and process development. A. K. Datta and R. C. Anatheswaran. (eds.). Handbook magnetic fields. Nature, 196:539-541.
of Microwave Technology for Food Applications. Marcel Dekker, Inc. New York. Gersdorf, R., deBoer, F.R., Wolfrat, J.C., Muller, F.A., Roeland, L.W. 1983. The high magnetic
Davidson, P. M. 1999. Potential for emergence of resistance to antimicrobials used in the facility ofthe University ofAmsterdam, high field magnetism. Proceedings International
food industry. Proceeding Symposium on Food Microbiology. International Institute symposium on High Field Magnetism. Osaka, Japan. 277-287.
Life Science North America Tech Committe on Food Microbiology. p.19-21. Dearborn, Gervilla, R., Capellas. M., Ferragut, V. and Guamis, B. 1997a. Effect of high hydrostatic pres
Ml. sure on Listeria innocua 910 CECT inoculated into ewes' milk. J Food Protect. 60(1):33-37.
Davies, L. J., Kemp, M. R. and Fryer, P. J. 1999. The geometry of shadows: effects of inhomo Gervilla, R., Felipe, X., Ferragut, V. and Guamls, B. 1997b. Effect of high hydrostatic pressure
geneities in electrical field processing. JFood Eng. 40:245-258. on Escherichia coli and Pseudomonas fluorescens strains in bovine milk. J Dairy Sci.
de Alwis, A. A. P., Halden, K. and Fryer, P. J. 1989. Shape and conductivity effects in ohmic 80:2297-2303.
heating of foods. Chem Eng Res Des. 67:159-168. Giddings, N. !.. Allard, H.A. and Hite, B. H. 1929. lnactivationofthe tobacco mosaic virus by
de Alwis, A. A. P. and Fryer, P. J. 1990a. Afinite element analysis of heat generation and transfer high pressure. Phytopatology. 19:749-750.
during ohmic heating of food. Chem Eng Sci. 45(6): 1547-1559. Gilliland, S. E. and Speck, M. L. 1967a. Inactivation of microorganisms by electrohydraullc
de Alwis, A. A. P. and Fryer, P. J. 1990b. The use of direct resistance heating in the food shock. Appl Microbial. 15(5):1031-1037.
industry. I Food Eng. 11:3-27. Gilliland, S. E. and Speck, M. L. 1967b. Mechanism of the bactericidal action produced by
Decareau, R. V. 1985. Pasteurization and sterilization. Microwaves in the food processing electrohydraulic shock. Appl Microbiol. 15(5):1038-1044.
industry. Academic Press. Gola, S., Foman, C., Carpi, G., Maggi, A., Cassara, A. and Rovere, P. 1996. Inactivation of
DVGW Arbeitsblatt W 294, 1997. Desinfektionsanlagen fur die Trinkwasserversorgung - bacterial spores in phosphate buffer and in vegetable cream treated at high pressures. R.
Anforderungen und Prufung. Bonn. Hayashi and C. Balny(eds.). High Pressure Bioscience and Biotechnology. Amsterdam. 253
Dibben, D. 2000. Electromagnetics: fundamental aspects and numerical modeling. A. K. 259. Elsevier Science 8. V.
Datta and Anatheswaran. Handbook of Microwave Technology For Food. Marcel Dek Goldblith, S. A. and Wang, D. I. C. 1967. Effect ofmicrowaves on Escherichia coli and Bacillus
ker, Inc. New York. subtilis.Appl Microbiol.15(6):1371-1375,
Doyle, M. P. and Schoeni, J. L. 1984. Survival and growth characteristics of escherichia coli Gould, G. W. and Sale, A. J. H. 1970. Initiation of germination of bacterial spores by hydro
associated with hemorrhagic colitis. Appl Env Microbiology. 48:855-856 static pressure. J Gen Microblol. 60:335-346.
Dring, G. J. 1976. Some aspects of the effects ofhydrostatic pressure on microorganisms. S. Grahl, T., Sitzmann, W. and Marki, H. 1992. Killing of microorganisms in fluid media by high
A. Skinner and V. Hugo(eds.). Inhibition and inactivation of vegetative microbes. New voltage pulses. DECHEMA Biotechnology Conferences. 675-679.
York. Academic Press Inc. Grahl, T. and Maerkl, H. 1996. Killing of microorganisms by pulsed electric fields. Applied
Dunn, J.E. and Pearlman, J. S. 1987. Methods and apparatus for extending the shelf-life of MicrobiolBiotechnol. 45{1 /2):148-157.
fluid food products. Maxwell Laboratories, Inc. U.S. Patent 4,695,472. Granum, P. E.1997. Bacillus cereus. M. P. Doyle, L. R. Beauchat andT. J. Montville(eds.). Food
Dunn, J., Clark, R. W., Asmus, J. F., Pearlman, J. S., Boyer, K., Pairchaud, F. and Hofmann, G. Microbiology: Fundamentals and Frontiers. Washington, DC. American Society for Mi
1988. Methods and apparatus for preservation of foodstuffs. US Int. Pat. Appl. No. WO crobiology. 327-336.
88/03369. Gunasekaran, S. and Chiyung, A., 1994. Evaluating milk coagulation with ultrasonics. Food
Dunn, J., Clark, R. W.. Asmus, I. F., Pearlman, J. s.. Boyer, K., Pairchaud, F. and Hofmann, G. Technol. 48(12):74-78.
A. 1991. Methods for preservation of foodstuffs. Maxwell Laboratories, Inc. US Patent Gupta, R. P. and Murray, W. 1988. Pulsed high electric field sterilization. IEEE Pulsed Power
5,034,235. Conf. Record. National Research Council. 58-64.
Dunn, J., Clark. W. and Ott, T. 1995. Pulsed-light treatment of food and packaging. Food Haas, G. J., Prescott, H. E., Dudley, E., Dik, R., Hintlan, C. and Keane, L. 1989. Inactivation of
Technol. 49(9):95-98. microorganisms by carbon dioxide under pressure. J Food Safety. 9:253-265.
Dunn, J. 1996. Pulsed light and pulsed electric field for foods and eggs. Poul Sci. 75(9): II 33 Halden, K., de Alwis, A. A. P. and Fryer, P. J. 1990. Changes in the electrical conductivity of
1136. foods during ohmic heating. Int J Food Sci Technol. 25:9-25.
Dunn, J.E., Ott, T.M., Clark, R.W.1996 Prolongation of shelf-life in perishable pod products. Hamid, M.A. K., Boulanger, R. J., Tong, S. C., Gallop, R.A. and Pereira, R. R.1969. Microwave
U.S. Patent 5,489,442. pasteurization of raw milk. JMicrowave Power. 4(4):272-275.
Dunne, C. P., Dunn, J., Clark, W., Ott, T. and Bushnell, A.H. 1996. Application of high energy Hara, A., Nagahama, G., Ohbayashi, A. and Hayashi, R. 1990. Effects of high pressure on
electric field pulses to preservation of foods for combat rations. Science and Technology inactivation of enzymes and microorganisms in nonpasteurized rice wine (Namazake).
for Force XXI. Department of the Army. Norfolk, Virginia. June 24-27. 7. Nippon Nogeikagaku Kaishi. 64(5): 1025-1030.
Edebo, L., Selin, I. 1968. The effect of pressure shock-wave and some electrical quantities in Harlfinger, L. 1992. Microwave sterilization. Food Technol. 46(12):57-61.
the microbicidal effect of transient electric arcs in aqueous systems. J Gen Microbiol. Hayakawa, I., Kanno, T., Tomita, M. and Fujio, Y. 1994a. Application of high pressure for
50:253-259. spore inactivation and protein denaturation. J Food Sci. 59(1):159-163.
El Moueffak, A. C., Antoine, M., Cruz, C.. Demazeau, G., Largeteau, A., Montury, M., Roy, B. Hayakawa, I., Kanno, T., Yoshiyama, K. and Fujio, Y. 1994b. Oscillatory compared with con
and Zuber, E 1995. High pressure and pasteurization effect on duck foie gras. Int JFood tinuous high pressure sterilization on Bacillus stearothermophilus spores. J Food Sci.
Sci Technol. 30(6):737-743 59(1):164-167.
Enomoto, A., Nakamura, K., Hakoda, M. and Amaya, N. 1997. Lethal effect of high-pressure Hayashi and Balny, C. High Pressure Science and Biotechnology. Hayashi and C. Balny. Am
carbon dioxide on a bacterial spore. J Ferment Bioeng. 83(3):305-307. sterdam. Elsevier Science, B.V. 171-174, 253-259.
EPRI. 1998. Pulsed electric field processing in the food industry: a status report on PEF. Palo Hayashi, R. 1991. Pressure-processed food: Research and development. San-Ei Publishing.
Alto, CA. Industrial and Agricultural Technologies and Services. CR-109742. Kyoto, Japan.
Estiaghi, M. N., Stute, R. and Knorr, D. 1994. High pressure and freezing pretreatment effects Heddleson, R. A. and Doores, S. 1994. Factors affecting microwave heating of foods and
on drying, rehydration, texture and color ofgreen beans, carrots and potatoes. JFood Sci. microwave induced destruction of foodborne pathogens - a review. J Food Protect.
59:1168-1170. 57(11):1025-1037.
FABCO Technologies. 1998. Pulse Power disinfects fresh juices, extends shelf-life. Food Eng. Heddleson, R. A., Doores, S. and Anantheswaran, R. C. 1994. Parameters affecting destruc
10:47-50. tion of Salmonella spp. by microwave heating. J Food Sci. 59(2):447-451.
Fakhouri, M. 0. and Ramaswamy, H. S. 1993. Temperature uniformity of microwave heated Heinz, V. and Knorr, D. 1998. High pressure germination and inactivation kinetics of bacterial
foods as influenced by product type and composition. Food Res Int. 26:89-95. spores. N. S. Isaacs(ed.). High Pressure Food Science, Bioscience and Chemistry. Cam
Farkas, J. 1997. Physical methods of food preservation. Food Microbiology. Fundamentals bridge, UK. The Royal Society of Chemistry. 436-441.
and Frontiers. M.P. Doyle, L.R. Beauchat, T.J. Monrville(eds.). Washington, D.C. ASM Heinz, V. and Knorr, D. 1999. The effects of high pressure on microbial spores. European
Press. 497-519. Conference on Emerging Food Science and Technology. Tempere, Finland. November 22
Fedorov, N. E. and Rogov, I. A. 1960. Bactericidal effects ofelectrical impulses ofhigh voltage 24, 1999.
in milk. Dairy Sci Abstract. 25(8):312-318. Hendrickx, M., Maesmans, G., De Cordt, S., Van Loey, A., Noronha, J. and Tobback, P. 1995.
Fernandez-Molina, J. J., Barkstrom, E., Torstensson, P., Barbosa-Canovas, G. V. and Swanson, Evaluation of the integrated time-temperature effect in thermal processing of foods. CRC
B. G. 1999. Shelf-life extension of raw skim milk by combining heat and pulsed electric Crit Rev Food Sci Nutr. 35(3):231-262.
fields. Food Res Int. Heredia, N. L., Garcia, G. A., Luevanos, R., Labbe, R. G. and Garcia-Alvarado, J. S. 1997.
Fleischman, G. J. 1996. Predicting temperature range In food slabs undergoing long term low Elevation of the heat resistance of vegetative cells and spores of Clostridium perfrlngens
power microwave heating. J Food Eng. 27(4):337-351. type A by sublethal heat shock. J Food Prot. 60(8):998.
Floros, J. D. and Uang. H. 1994. Acoustically assisted diffusion through membranes and Heremans, K. 1995. High pressure effects on biomolecules. D. A. Ledward, D. E. Johnston, R.
biomaterials. Food Technol. 48(12):79-84. G. Earnshaw and A. P. M.
Frankel, R. B. and Uburdy, R. P. 1995. Biological effects of static magnetic fields. In Hand Hasting (eds.). High Pressure Processing of Foods. Leicestershire, UK. Nottingham Univer
book of Biological Effects of Electromagnetic Fields. Polk, C. and Postow, E. (Ed). 2"' Ed. sity Press.
CRC Press. Boca Raton. FL. Hite, B. H. 1899. The effects of pressure in the preservation of milk. Morgantown. Bull WV
Fryer, P. J., deAlwis, A. A. P., Koury, E., Stapley, A.G. F. and Zhang, L. 1992. Ohmic processing Univ Agric Exp Sta Morgantown. 58. 15-35.
of solid-liquid mixtures: heat generation and convection effects. J Food Eng. 18:101-125. Hite, B. H., Giddings, N. J. and Weakly, C. E. 1914. The effects of pressure on certain micro
Fu, W.-R. and Hsieh, C.-C. 1999. Simulation and verification of two-dimensional ohmic organisms encountered in the preservation of fruits and vegetables. Morgantown. Bull
heating in static system. J Food Sci. 64(6):946-949. WV Univ Agric Exp Sta Morgantown. 146. 1-67.
Fujii, T., Satomi, M.. Nakatsuka, G., Yamaguchi, T. and Okuzumi, M. 1994. Changes in fresh Ho, S. Y., G.S., M., Cross, J. D. and Griffiths, M. W. 1995. Inactivation of pseudomonas
ness indexes and bacterial flora during storage of pressurized mackerel. Shokuhin Eiseigaku fluorescens by high voltage electric pulses. J Food Sci. 60(6):1337-1343.
Zasshi (J Food Hyg Soc Japan). 35(2):195-200. Ho, S. Y. and Mittal, G. S. 1997. Analysis of 2 high voltage electric pulse systems for batch and
Fujii, T., Satomi, M., Nakatsuka, G. and Yamaguchi, T. 1995. Effect of media on the detection continuous pasteurization of selected food products. Universty of Guelph. confidential.
rate of pressure-injured bacteria. Shokuhin Eiselgaku Zasshi (l Food Hyg Soc Japan). Ho, S. Y., Mittal, G. S. and Cross, J. D. 1997. Effects of high field electric pulses on the activity
36(1):17-21. of selected enzymes. J Food Eng. 31(1):69-84.
Fujikawa, H., Ushioda. H. and Kudo?, Y. 1992. Kinetics of Escherichia coli destruction by Hofmann, G.A. 1985. Deactivation of microorganisms by an oscillating magnetic field. U.S.
microwave irradiation. Appl Environ Microbiol. 58(3):920-924. Patent 4,524,079.
Fung, D. Y. C. and Cunningham, F. E. 1980. Effect of microwaves on microorganisms in Hong, S. l., Park, W. S. and Pyun, Y. R. 1997. Inactivation ofLactobacillus sp. from kimchi by
foods. J Food Protect. 43(8):641-650. high pressure carbon dioxide. Lebensm Wiss Technol. 30:681-685.
Garcia, M. L., Burgos, I., Sanz, B. and Ordonez, J. A. 1989. Effect ofheat and ultrasonic waves Hoover, D. G., Metrick, C .. Papineau, A. M., Farkas, D. F. and Knorr, D. 1989. Biological effects
on the survival of two strains of Bacillus subtilis. J Appl Bacteriol. 67:619-628. of high hydrostatic pressure on food microorganisms. Food Technol. 43(3):99-107.

104 JOURH~L. OP FOOD SCIENCE-Supplement

References . . .
Hoover, D. G. 1993. Pressure effects on biological systems. Food Technol. 47(6):150-155. WissTechnol. 20:101-110.
Hoover, D. G. 1997. Minimally processed fruits and vegetables: Reducing microbial load by Knutson, K. M., Marth, E. H. and Wagner, M. K. 1988. Use of microwave ovens to pasteurize
nonthermal physical treatments. Food Technol. 51(6):66-69, 71 milk. J Food Protect. 51(9):715-719.
Horie, Y.. Kimura, K., Ida, M.. Yosida, Y. and Ohki, K.1991. Jam preparation by pressurization. Kozempel, M. F., Annous, B. A., Cook, R. D., Scullen, 0. J. and Whiting, R. C. 1998. lnactiva
Nippon Nogelkagaku Kalshi. 65(6):975-980. tion of microorganisms with microwaves at reduced temperatures. J Food Protect.
Houben, J., Schoenmakers, L., van Putten, E., van Roon, P. and Krol, B. 1991. Radio-frequen 61(5):582-585.
cy pasteurization of sausage emulsions as a continuous process. J Microwave Power Kozempel, M., Cook, R. D., Scullen, 0. J. and Annous, B. A. 2000. Development of a process
Electromagnetic Energy. 26(4):202-205. for detecting non-thermal effects of a microwave energy on microorganisms at low tem
Hoyer, 0. 1998. Testing performance and monitoring of UV systems for drinking water perature. I Food Processing. In print.
disinfection. Water Supply. 16(1/2):419-442. KSU. 1999. KSU microbiologist uses microwave, acid treatments to kill pathogens, maintain
Hughes, D. E. and Nyborg, W. L. 1962. Cell disruption by ultrasound. Science. 38:108-114s. color in meat. KSU Press Release. June 15, 1999.
H!llsheger, H. and Nieman, E. G. 1980. Lethal effect of high-voltage pulses one. coli K12. Kudra, T., Van De Voort, F. R., Raghavan, G. S. V. and Ramaswamy, H. S. 1991. Heating char
Radiat Environ Biophys 18(4):281-8. acteristics of milk constituents Ina microwave pasteurization system. J Food Sci. 56(4):931
H!llsheger, H., Pottel, J. and Niemann, E.G. 1981. Killing of bacteria with electric pulses of 934.
high field strength. Radiat Environ Biophys. 20:53-65. Kulshrestha, S. A. and Sastry, S. K. 1999.1.ow-frequency dielectric changes in vegetable tissue
H!llsheger, H., Pottel, J. and Niemann, E.G. 1983. Electric field effects on bacteria and yeast from ohmic heating. !FT Annual Meeting: Book of Abstracts. p. 211. Chicago, IL.
cells. Radial Environ Biophys. 22:149-162. Lagunas-Solar, M. C. 1997. Method of controlling Insects and mites with pulsed ultraviolet
!CMSF. 1996. Microorganisms In foods. Microbiological Specifications of Food Pathogens. light. Regents of the University of California. The Regents of the Universlty of California.
Book 5. Blackie Academic and Professional Puhl. London. US Patent 5,607,711.
Imai, T., Uemura, K., Ishida, N., Yoshizald, S. and Noguchi, A. 1995. Ohmic heating ofJapanese Laidler, K. J. 1951. The Influence of pressure on rates of biological reaction. Arch Biochem.
white radish Rhaphanus sativus. Int J Food Sci Technol. 30:461-472. 30:226-240.
lshiguro, Y., Sato, T.. Okamoto, T., Okamoto, K.. Sakamoto, H., lnakuma, T. and Sonoda, Y. Larkin, J. and Reddy, N. R. 1999. Personal communication.
1993. Effects of hydrostatic pressure and antimicrobial substances on the sterilization of Larsen, W. P., Hartzell, T. B. and Diehl, H. S. 1918. The effects of high pressure on bacteria. J
tomato juice. Nippon Nogeikagaku Kalshl. 67(12):1707-1711. InfDiseases. 22:271-279.
!UVA. 2000. lUVAWebsite [International UltraVioletAssoclation). 2000. http://www.luva.org. Lau, M. H., Tang, J.. Taub, I. A., Yang, T. C. S., Edwards, C. G. and Younce, F. L. 1998. Microwave
lwahashi, H., Fujii, S., Obuchi, K., Kaul, S. C., Sato, A. and Komatsu, Y. 1993. Hydrostatic heating uniformity offood during 915 MHz microwave sterilization process. Proceedings
pressure is like high temperature and oxidative stress in the damage it causes to yeast. of the 33rd Microwave Power Symposium. 78-81.
FEMS Microbiology Letters. 108:53-58. Lau, M.H., Tang, J., Taub, I. A., Yang, T. C. S., Edwards, C. G. andYang,A. P. P. 1999a,APplicatlon
Jackson, G. J.. Leclerc, J.E., Bier, J. W. and Madden, J.M. 1997. Cyclospora still another new ofchemical markers in assessing heating patterns produced by 915 and 2450 MHz micro
foodborne pathogen. Food Technol. 51(1):120 waves. 1-19.
Jacob, H. E., Forster, W. and Berg, H. 1981. Microbial Implications of electric field effects. II. Lau, M. H., Tang, J., Taub, I. A., Yang, T. C. S., Edwards, C. G. and Younce, F. L. 1999b. HTST
Inactivation ofyeast cells and repair oftheir cell envelope. ZAllg Microbial 21 (3):225-232. processing offood in microwave pouch using 915 MHz microwaves. A!ChE Annual Meet
Jaenicke, R. 1981. Enzymes under extremes of physical conditions. Ann Rev Biophys Bloeng. ing.
10:1-67. Ledward, D. A., Johnston, D. E., Earnshaw, R. G. and Hasting, A. P. M. 1995. High Pressure
Jay, J. J. 1996. Modern food microbiology. Chapman Hall. New York. Processing ofFoods. Nottingham University Press. Leiscestershire, UK.
Jayaram, S., Castle, G. S. P. and Margaritis, A. 1991. Effects of high electric field pulses on Lee, B. H.. Kermasha, S. and Baker, 8. E. 1989. Thermal, ultrasonic and ultraviolet Inactivation
Lactobacillus brevis at elevated temperatures. IEEE Industry Appl Society Annual Meet of Salmonella in thin films ofaqueous media and chocolate. Food Microbial. 6:143-152.
ing. 5:674-681. Lee, C. H. and Yoon, S. W. 1999. Effect of ohmic heating on the structure and permeability
Jayaram, S., Castle, G. S. P. and Margaritis, A. 1992. Kinetics of sterilization of Lactobacillus of the cell membrane of saccharomyces cerevisiae. 1999 IFT Annual Meeting. Chicago.
brevis cells by the application ofhigh voltage pulses. Biotechnol Bioeng. 40(11): 1412-1420. July24-281999.
Jeng, D. K. H., Balasky, G., Kaczmarek, K. A. and Woodworth, A. G. 1987. Mechanism of Leistner, L. and Garris, L. G. M. 1995. Food preservation by hurdle technology. Trends in
microwave sterilization in the dry state. Appl Environ Microbial. 53(9):2133-2137. Food Science & Technology. 6(2):41-46.
Jeppson, M. R. and Harper, J. C. 1967. Microwave heating substances under hydrostatic Wlard, H. S. 1993. Bactericidal effect of chlorine on attached salmonellae with and without
pressure. Cryodry Corporation. US Patent 3,335,253. soniflcation. J Food Protect. 56(8):716-717.
Jeyamkondan, S., Jayas, D.S. and Holley, R. A. 1999. Pulsed electric field processing offoods: Lillard, H. S. 1994. Decontamination of poultry skin by sonication. Food Technol. 48(12):72
a review. J Food Protect. 62(9): 1088-1096. 73.
Johnson, F. H. and Campbell, D. H. 1945. The retardation of protein denaturatlon by hydro Lin, W. and Sawyer, C. 1988. Bacterial survival and thermal responses of beef loaf after
static pressure. Journal of Ceil Comp Physiol. 26:43-46 microwave processing. J Microwave Power Electromagnetic Energy. 23(3):183-194.
Johnson ,F. H.. Eyting, H., and Jones-Stover. B. 1974. The theory of rate processes in biology Line, J. E., Fain, A. R., Moran, A. B., Martin, L. M., Lechowich, R. V., Carosella, J. M. and
and medicine. p. 82. Wiley, New York. Brown, W. L. 1991. Lethality of heat to escherichla coli 0157:H7: D-value and z-value
Josephson, E.S. and Peterson, M.S.(Eds.) 1982. Preservation of food by ionizing radiation. determinations in ground beef. J Food Protect. 54:762-766.
l, II, Ill. CRC Press. Boca Raton, FL. Linton, M., McClements, J.M. J. and Patterson, M. F. 1999. lnactlvatlon of Escherichia coli
Kakugawa, K., Okazaki, T., Yamauchi, S., Morimoto, K., Yoneda, T. and Suzuki, K. 1996. Ther 0157:H7 in orange juice using a combination of high pressure and mild heat. J Food
mal inactivating behavior ofBaclllus stearothermophilus under high pressure. R. Hayashi Protect. 62(3):277-279.
and C. Balny. High Pressure Bioscience and Biotechnology. Amsterdam. Elsevier Science B. Liu, X., Yousef, A. E. and Chism, G. W. 1997. Jnactivatlon of Escherichia coll 0157:H7 by the
V.171-174. combination of organic acids and pulsed electric field. J Food Safety. 16(4):287-299.
Kaichayanand, N., Sikes, T., Dunne, C. P. and Ray, 8. 1994. Hydrostatic pressure and elec Lou, Y. and Yousef, A. E. 1997. Adaptation to sublethal environmental stresses protects
troporation have increase bactericidal efficiency in combination with bacteriocins. Ap listeria monocytogenes against lethal preservation factors. Appl Environ Microbial.
plied and Environmental Microbiology. 60:4174-4177. 63(4):1252-1255.
Kalchayanand, N., Sikes, A., Dunne, C. P. and Ray, 8. 1998. lnteraction ofhydrostatic pressure, Love, P. 1998. Correlation of fourier transforms of pulsed electric field waveform and mi
time and temperature of pressurization and pediocin AcH on inactivation of food borne croorganism inactivation. IEEE Transactions on Dielectrics and Electrical Insulation.
bacteria. J Food Protect. 61(4):425-431. 5(1):142-147.
Kasevich, R. S. 1998. Understand the potential ofradiofrequency energy. Chem Eng Progress. Lubicki, P. and Jayaram, S. 1997. High voltage pulse application for the destruction of the
75-81. Gram-negative bacteriumYersinia enterocolltlca. Bioelectrochemistry and Bioenergetics.
Katsuyama, A. M. 1993. The microbiology of sanitation. A. M. Katsuyama. Principles ofFood 43:135-141.
Processing Sanitation. Washington, DC. The Food Processors Institute. 72-84. 2nd Edi Lildemann, H.-D. 1992. Water and aqueous solutions under high pressure. C. Baloy, R.
tion. Hayashi, K. Heremans and P. Masson. High Pressure and Biotechnology. London. Col
Kazbekov, E. N. and Vyacheslavov, L. G. 1978. Effects of microwave irradiation on some logue INSERM/John Libby Eurotext Ltd. 224. 25-32.
membrane-related process in bacteria. Gen Physioi Biophys. 6:57 -64. Ludwig, H., Bieler, D., Hallbauer, K. and Scigalla, W. 1992. Inactivation of microorganisms by
Keith, W. D., Harris, L. J.. Hudson, L. and Griffiths, M. 1997. Pulsed electric fields as a process hydrostatic pressure. C. Balny, R. Hayashi, K. Heremans and P. Masson. High Pressure and
ing alternative for microbial reduction in spice. Food Res Int. 30(3/4):185-191. Biotechnology. London. Collogue INSERM/John Libby Eurotext Ltd. 224. 25-32.
Kenyon, E. M.. Westcott, D. E.. Lacasse, P. and Gould, J. 1971. A system for continuous Ludwig, H., Van Almsick, G. and Sojka, B. 1996. High pressure inactivation of microorgan
processing of food pouches using microwave energy. J Food Science. 36(2):289-293. isms. R. Hayashi and C. Balny. High pressure Bioscience and Biotechnology. Amsterdam.
Khalaf, W. G. and Sastry, S. K. 1996. Effect ofOuid viscosity on the ohmic heating rate of solid Elsevier Science B. V. 237.
liquid mixtures. J Food Eng. 27:145-158. Ma, L., Chang, F. J. and Barbosa-Cl1novas, G. V. 1997. Inactivation of E.coli in liquid whole
Khalil, H. and Villata, R. 1988. Comparative study on injury and recovery ofStaphylococcus eggs using pulsed electric fields technologies. New frontiers in food engineering. Proceed
aureus using microwaves and conventional heating. J Food Protection. 51(3):181-186. ings of the Fifth Conference of Food Engineering. American Institute of Chemical Engi
Khalil, H. and Villata, R. 1989a. A comparative study ofthe thermal inactivation of B. stearo neers. 216-221.
thermophilus spores in microwave and conventional heating. Food Engineering and MacGregor, S. J., Anderson, J. G., Fouracre, R. A.. Farish, 0., Mcllvaney, L. and Rowan, N. J.
Process Applications. New York, NY. Elsevier Applied Science Publishers. I. 583-594 1998. Light Inactivation offood-related pathogenic bacteria using a pulsed power source.
Khalil, H. and Villata, R. 1989b. The effect ofmicrowave sublethal heating on the ribonucleic Lett Appl Microbial. 27:67 70.
acids of Staphylococcus aureus. J Food Protect. 52(8):544-548. Mackey, 8. M., Forestlere, K. and Isaacs, N. 1995. Factors affecting the resistance of Listeria
Kim, H.-J. and Taub, I. A. 1993. Intrinsic chemical markers for aseptic processing of partic monocytogenes to high hydrostatic pressure. Food Biotechnol. 9: 1-11.
ulate foods. Food Technol. 47(1):91-97, 99. Marquez, V. 0., Mittal, G. S. and Griffiths, M. W. 1997. Destruction and inhibition of bacterial
Kim, H.J.. Choi, Y.-M., Yang, T. C. S., Taub, I.A., Tempest, P., Tucker, G. and Parrott, D. L. 1996. spores by high voltage pulsed electric field. J Food Sci. 62(2):399-401,409.
Validation of ohmic heating for quality enhancement of foods products. Food Technol. Marquis, R. E. and Bender, G. R.1987. Barophysiologyofprokaryotes and proton-translo
50(5):253-261. catlng ATPases. H. W. Jannisch, R. E. Marquis and A. M. Zimmermann. Current Perspec
Kimball, G.C. 1937. The growth of yeast on a magnetic fields. J. Bacterial. 35:109-122. tives in High Pressure Biology. London. Academic Press, Ltd. 65-73.
Kinosita, K. J. and Tsang, T. Y. 1977. Voltage induced pore formation and haemolysis eryth Martens, 8. and Knorr, D. 1992. Developments ofnonthermal processes for food preserva
rocytes. Biochim BiophysActa. 471:227-242. tion. Food Technol. 46(5):124, 126-133.
Kinosita, K. J. and Tsang, T. Y. 1979. Voltage-induced conductance in human erythrocyte Martin-Belloso, 0., Vega-Mercado, H., Qin, 8.-L., Chang, F.-J., Barbosa-Ci\novas, G. V. and
membranes. Biochim BiophysActa. 554:479-497. Swanson, 8. G. 1997a. Inactivation of Escherichia coli suspended in liquid egg using pulsed
Kinugasa, H., Takeo, T., Fukumoto, K. and Ishihara, M. 1992. Changes in tea components electric fields. J Food Process Preserv. 21(3):193-208.
during processing and preservation of tea extract by hydrostatic pressure sterilization. Martin-Belloso, 0., Qin, B. L., Chang, F. J., Barbosa-Canovas, G. V. and Swanson, B. 1997b.
Nippon Nogeikagaku Kaishi. 66(4):707-712. Inactivation ofEscherlchla coll in skim milk by high intensity pulsed electric fields. J Food
Knorr, D., Geulen, M., Grahl, T. and Sitzmann, W. 1994. Food application of high electric Process Eng. 20:317 -336.
field pulses. Trends Food Sci Technol. 5:71-75. Masuda, M., Saito, Y.. lwanami, T. and Hirai, Y. 1992. Effects of hydrostatic pressure on
Knutson, K. M.. Manh, E. H. and Wagner, M. K. 1987. Microwave Heating of Food. Lebensm packaging materials for food. High Pressure and Biotechnology. London. Collogue IN

Supplement-JOURNAL, OP FOOD SCIBNCB 105

Jf'S SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative f'ood Processing Technologies
SERM/lohn Libby Eurotext Ltd. 224. 545-547. Pagan, R. and Mackey, B. 1999. Membrane damage in pressure-treated cells of escherlchla
Matsumoto, Y.. Satake, T.. Shloji, N. and Sakuma, A. 199 I. Inactivation of microorganisms by coli. European Conference on Emerging Food Science and Technology, European Fed
pulsed high vol!age applications. Conference Record of IEEE Industrial Applications eration of Food Science and Technology. Tempere, Finland. November 22-24, 1999.
Society Annual Meeting. 652-659. Pagan, R., Jordan, s.. Benito, A. and Mackey, B. 1999. Enhanced acid sensitivity of pressure
Mazotta, A. S. 1999. Problems and solutions to development of pathogen resistance to damaged escherichia coli. European Conference on Emerging Food Science and Tech
thermal processing. ISSI Meeting. nology, European Federation of Food Science and technology. Tempere, Finland. No
McKinley, G. M. 1936. Short electric wave radiation in biology. B. M. Duggar. Biological vember 22-24, 1999.
Effects of Radiation. New York. McGraw-Hill. I. 541-558. Palaniappan, S., Richter, E. R. and Sastry, S. K. 1990. Effects ofelectricity on microorganisms:
Mclane, B. A. 1997. Clostrldium perfringens. M. P. Doyle, L. R. Beauchat and T. J. Montville A review. J Food Process Preserv. 14:393-414.
(Eds.). Food Microbiology: Fundamentals and Frontiers. Washington, DC. American Palaniappan, S. and Sastry, S. K. 1991a. Electrical conductivity ofselected solid foods during
Society for Microbiology. ohmic heating. J Food Process Eng. 14:221-236.
Mead, P. S., Slutsker, L., Dietz, V., McCalg, L. F., Breese, J. S., Shapiro, C., Griffin, P. M. and Palaniappan, S. and Sastry, S. K. 1991b. Electrical conductivity of selected juices: influences
Tauxe, R. V. 1999. Food-related illness and death In the United States. Emerging Infectious of temperature, solids contact, applied voltage and particle size. J Food Process Eng.
Diseases. 5:607-625. 14:247-260.
Metaxas, R. and Meredith, R. J. 1988. Industrial microwave heating. Peter Peregrinus. Lon Palaniappan, S. and Sastry, S. K. 1992. Effects of electroconductive heat treatment and
don. UK. electrical pretreatment on thermal death Kinetics ofselected microorganisms. Biotechnol
Metaxas. R. 1996. Foundations of electroheat: a unified approach. John Wiley & Sons. Bioeng. 39(2):225-232.
Chichester, UK. Palou, E., Lopez-Malo.A., Barbosa-Canovas, G. V., Welti-Chanes, J. and Swanson, B. G. 1998.
Metrick, C., Hoover, D. G. and Farkas, D. F. 1989. Effects of high hydrostatic pressure on Oscillatory high hydrostatic pressure inactivation of Zygosaccharomyces bailii. J Food
heat-resistant and heat-sensitive strains of Salmonella. J Food Sci. 54: 154 7 -1564. Protect. 61(9):1213-1215.
Meyer, P. 2000. Ultrahigh pressure, high temperature, food preservation process. US6,0l 7,572. Papineau, A. M., Hoover, D. G., Knorr, D. and Farkas, D. F. 1991. Antimicrobial effect of
Miller, J. F.. Dower, W. J. and Tompkins, L. S. 1988. High-voltage electroporation of bacteria: water-soluble chitosans with high hydrostatic pressure. Food Biotechnol. 5:45-47.
Genetic transformation of Camylobacter jejuni with plasmid DNA. Proc Natl Acad Sci. Parish, M. E. 1998. High pressure inactivation of Saccharomyces cerevisiae, endogenous
85:856-860. microflora and pectinmethylesterase in orange juice. J Food Protect. 18(1):57-65.
Miller, R.. Jeffrey, w.. Mitchell, D. and Elasri, M. 1999. Bacterial responses to ultraviolet light. Patterson, M. F., Quinn, M., Simpson, R. and Gilmour, A. 1995. Sensitivity of vegetative
Am Soc Microbiol. 65(8):535-541. pathogens to high hydrostatic pressure treatment in phosphate buffered saline and foods.
Minett, P. J. and Witt, J. A. 1976. Radio frequency and microwaves. Food Processing Industry. J Food Protect. 58(5):524-529
36-37,41. Patterson, M. F. and Kilpatrick, D. J. 1998. The combined effect of high hydrostatic pressure
Mittal, G. S. and Choundry, M. 1997. Pulsed electric field sterilization of waste brine solu and mild heat on inactivation of pathogens in milk and poultry. J Food Protect. 61(4):432
tion. Proceedings of the Seventh International Congress on Engineering and Food. Brigh 436.
ton Center, UK. CJ3-Cl6. Paul, P. L. and Morita, R. Y. 1971. Effects of hydrostatic pressure and temperature on the
Miyakawa, H., Anjitsu, I(., Ishibashi, N. and Shimanura, S. 1994. Effects of pressure on en uptake and respiration of amino acids by a faculttively psychrophilic marine bacterium.
zyme activities ofLactobacillus helveticus LHE-51 I. Bioscl Biotechnol Biochem. 58(3):606 JBacteriol. 108:835-843.
607. Paul, P., Chawala, S. P., Thomas, P. and Kesavan, P. C. 1997. Effect of high hydrostatic pressure,
Miyao, S .. Shindoh, T., Miyamori, K. and Arita, T. 1993. Effects of high pressurization on the gamma-irradiation and combined treatments on the microbiological quality of lamb
growth of bacteria derived from surimi (fish paste). Nippon Shokuhin Kogyo Gillaishi meat during chilled storage. J Food Safety. 16(4):263-271.
(Journal of the Japanese Society for Food Science and Technology). 40(7):478-484. Peleg, M. 1995. A model of microbial survival after exposure to pulse electric fields. J Sci
Mizrach, A., Galilli, N. and Rosenhouse, G. 1994. Determining quality of fresh products by Food Agric. 67(1):93-99.
ultrasonic excitation. Food Technol. 48(12):68-71. Peleg, M. and Cole, M. B. 1998. Reinterpretation of Microbial Survival Curves. Crit Rev in
Mizuno, A. and Hori, Y. 1991. Destruction ofliving cells by pulsed high-voltage application. Food Science. 38(5):353-380.
IEEE Trans Ind Appl. 24(3):387-394. Perrier-Cornet, J.M., Marechal, P.A. and Gervais, P. 1995. A new design Intended to relate
Mizuno, A. and Hori, Y. 1998. Destruction of living cells by pulsed high-voltage application. high pressure treatment to yeast cell mass transfer. J Biotechnol. 41:49-58.
IEEE Trans Ind Appl. 24(3):387-394. Pierson, M. D. and Corlett, D. A.). 1992. HACCP principles and applications. Van Nostrand
Moore. R.L. 1979. Biological effects of magnetic fields. Studies with microorganisms. Can. J. Reinhold Publishing. New York.
Microbiol., 25:1145-1151. Ponce, E.. Pia, R.. Mor-Mur, M., Gervilla, R. and Guamis, B. 1998. Inactivation of Listeria
Moorman, J.E., Toledo, R. T. and Schmidt, K. 1996. High-pressure throttling (HPTJ reduces innocua inoculated in liquid whole egg by high hydrostatic pressure. J Food Protect.
microbial population, Improves yogurt consistency and modifies rheological properties 61(1):119-122.
of ultrafiltered milk. IFT Annual Meeting: Book of Abstracts. 49. Popper, L. and Knorr, D. 1990. Applications of high-pressure homogenization for food
Mudgett, R. E. and Schwartzberg, H. G. 1982. Microwave food processing: Pasteurization preservation. Food Technol. 44:84-89.
and sterilization: A review. AIChE Symposium Series. 78(218):1-11 Pothakamury, U.R., Barbosa-Canovas, G.V., and Swanson, B.G. (1993). Magnetic-field inac
Mudgelt, R. E. 1994. Electrical Properties of Foods. M.A. Rao and S.S. H. Rizvi(eds.). Engi tivation of microorganisms and generation of biological changes. Food Technol. 47(12) :85
neering Properties of Foods. New York. Marcel Dekker. 389-455. 93.
Mussa, D. M.. Ramaswamy, H. S. and Smith, J.P. 1999. High-pressure destruction kinetics of Pothakamury, U. R. 1995. High voltage pulsed electric field inactivation of Bacillus subtilis
listeria monocytogenes on pork. J Food Protect. 62(1):40-45. and Lactobaclllus delbrueckli. Rev Esp CT. 35(1):101-107.
Nakayama, A.. Yano, Y., Kobayashi, S., Ishikawa, M. and Sakai, I(. 1996. Comparison of pres Pothakamury, U. R., Monsalve-Gonzalez, A.. Barbosa-Canovas, G. V. and Swanson, B. G.
sure resistances of spores of six Bacillus strains with their heat resistances. Appl Environ 1995. Inactivation of Escherichia coli and Staphylococcus aureus in model foods by
Microbiol. 62(10):3897-3900. pulsed electric field technology. Food Res Int. 28(2):167-171.
National Canners Association 1968. Laboratory manual for food canners and processors. Pothakamury, U. R., Vega, H .. Zhang, Q. H., Barbosa-Canovas, G. V. and Swanson, B. G. 1996.
AVI Publishing Company. I. 1-8, 94-100. Effect ofgrowth stage and processing temperature on the inactivation ofE. coli by pulsed
Ng, H., Bayne, G. G. and Garibaldi, J. A. 1969. Heat resistance ofSalmonella, the uniqueness electric fields. J Food Protect. 59(11):1167-1171.
of Salmonella senftenberg 775W. Appl Micro biol. 17:78-82. Prakash, A., l(im, H. -J. and Taub, I. A. 1997. Assessment of microwave sterilization of foods
Nishi, K.. Kato, R. and Tomita, M. 1994. Activation of Bacillus spp. spores by hydrostatic using intrinsic chemical markers. J Microwave Power Electromagnetic Energy. 32(1):50-57.
pressure. Nippon Shokuhin Kogyo Gillaishi (Journal of the Japanese Society for Food Proctor, B. E. and Goldblith, S. A. 1951. Electromagnetic radiation fundamentals and their
Science and Technology). 41(8):542-548. applications in food technology. Advances in Food Research. 3:120-196.
Ohlsson, T. and Hisman, P. 0. 1978. Temperature distribution of microwave heating-spheres Prosetya, H. and Datta, A. K. 1991. Batch microwave heating of liquids: an experimental
and cylinders. J Microwave Power. 13(4):303 study. J Microwave Power Electromagnetic Energy. 26(4):215-226.
Ohlsson, T. 1991. Development and evaluation of a microwave sterilization process for PurePulse Technologies. 1999. PureBright?CoolPure advanced sterilization, decontam
plastic pouches. 8th World Congress of Food Science and Technology. Toronto, CA. Sept. ination and preservation technology for the food and food packaging Industry. San
29-0ct.4. Diego, CA. PurePulseTechnologies Inc. Brochure. http://www.packaging2000.com/
Ohnlshl, 1993. Pressurization ofTrichinella spiralis. Japanese-only book of)apanese pres purepulse/Purepulse.html.
sure consortium proceedings. Chapter 17. Qin, B. L., Zhang, Q., Barbosa-Canovas, G. V., Swanson, B. G. and Pedrow, P. D. 1994. Inac
Okazaki, T., Yoneda, T. and Suzuki, I(. 1994. Combined effects of temperature and pressure tivation of microorganisms by pulsed electric fields with different voltage waveforms.
on sterilization ofBaciUus subtilis spores. Nippon Shokuhin Kogyo Gillaishi (Journal of IEEE Trans Dieleclnsul. 1(6):1047-1057.
the Japanese Society for Food Science and Technology). 41(8):536. Qin, B.-L. 1995. Nonthermal inactivation Saccharomyces cerevisiae in apple juice using pulsed
Okazaki, T., Kakugawa, I(., Yamauchi, S., Yoneda, T. and Suzuki, K. 1996. Combined effects of electric fields. Lebensm Wiss Technol. 28(6):564-568.
temperature and pressure on inactivation of heat-resistant bacteria. R. Hayashi and C. Qin, B.-L., Chang, F.-J., Barbosa-Canovas, G. V. and Swanson, B. G. 1995a. Nonthermalinac
Baloy. High Pressure Bioscience and Biotechnology. Amsterdam. Elsevier Science B. V. 415 tivation of S. cerevisiae in apple juice using pulsed electric fields. LebensmWiss Technol.
418. 28(6):564-568.
O'Meara, J.P., Farkas, D. F. and Wadsworth, C. K. 1977. Flexible pouch sterilization using a Qin, B., Pothakamury, U. R., Vega, H., Martin, 0., Barbosa-Canovas, G. V. and Swanson, B. G.
combined microwave-hot water hold simulator. Natick, MA. US Army Natick Reseach & 1995b. Food pasteurization using high intensity pulsed electric fields. J Food Technol.
Development Lab, Unpublish Report. (PN) DRYNM 77-120. 49(12) :55-60.
Ordoilez, J. A., Sanz, B., Hernandez, P. E. and Lopez-Lorenzo, P. 1984. A note on the effect Qin, B.-L., Zhang, Q. H., Barbosa-Cfoovas, G. V., Swanson, B. G. and Pedrow, P. D. 1995c.
of combined ultrasonic and heat treatments on the survival of therrnoduric streptococci. Pulsed electric field treatment chamber design for liquid food pasteurization using a
J Appl Bacterlol. 56:175-177. finite element method. Transactions of the ASAE. 38(2):557-565.
Ordollez, J. A., Aguilera, M.A.. Garcia, M. L. and Sanz, B. 1987. Effect of combined ultrasonic Qin, B.-L., Barbosa-Canovas, G. V., Swanson, B. G. and Pedrow, P. D. 1998. Inactivating mi
and heat treatment (therrnoultrasonlcatlon) on the survival ofa strain of Staphylococcus croorganism using a pulsed electric field continuous treatment system. IEEE Trans Indus
aureus. J Dairy Res. 54:61-67. Applic. 34(1):43-49.
Otake, T., Mori, H., Kawahata, T., lzumoto, Y., Nishimura, H., Oishi, I., Shlgehisa, T. and Ohno, Quass, D. W. 1997. Pulsed electric field processing in the food industry. A status report on
H. 1997. Effects of high hydrostatic pressure treatment of HIV lnfectlvity. K. Heremans. PEF. Palo Alto, CA. Electric Power Research Institute. CR-109742.
High Pressure Research in the Biosciences and Biotechnology. Leuven. Leuven University Qui, X., Jia, M., Sharma, S., Tuhela, L. and Zhang, Q. H. 1998. An integrated PEF pilot plant
Press. 223-236. for continuous nonthermal pasteurization of fresh orange juice. American Society of
Oxen. P. and Knorr, D. 1993. Baroprotective effects of high solute concentrations against Agricultural Engineers. 41(4):1069-1074.
inactivation of Rhodotorula rubra. Lebensmittel-Wlssenschaft und Technologie. 26:220 Rahman, M. S. 1999. Handbook of Food Preservation. New York. Marcel Dekker, Inc.
223. Ramaswamy, H. S. and PilletwiU, T. 1992. Temperature distribution In microwave-heated
Pagan, R., Esplugas, S., Gongora-Nieto, M. M., Barbosa-Canovas, G. V. and Swanson, B. G. food models. J Food Quality. 15(6):435-448.
1998. Inactivation of Bacillus subtilis spores using high intensity pulsed electric fields in Ramaswamy, H., Koutchma, T. and Tajchakavit, S. 2000. Enhanced thermal effects under
combination with other food conservation technologies. Food Sele Technol lnt. 4(1):33 microwave heating conditions. International Conference ofEngineering and Food (ICEF
44. 8J. Puebla, MX.

106 JOURNAL OF FOOD SCIENCE-Supplement

References ...
Raso, J.. Calderon, M. L., Gongora, M. Barbosa-C4novas. G. V. and Swanson, B. G. 1998. Ueba, N. 1996. Inactivation of HIV in bloodplasma by high hydroatatlc pressure. R. Ha
Inactivation of Zygosaccharomyces Ballii in fruit juices by heat, high hydrostatic preuure yashi and C. Balny. High pressure bioscience and biotechnology. Ellevler Science B. V. 273
and pulsed electric fields. J Food Sci. 63(8):1042-1044. 278.
Raso, J., Pagan, R., Condon, S. and Sala, F. J. 1998a. Influence of temperature and pressure Simpson, M. V., Barbosa-C4novas, G. V. and Swanson, B. G. 1995. The Combined Inhibitory
on the lethality of ultrasound. Appl Environ Microbial. 84(2):465-471. effect of lyaozyme and high voltage pulsed electric fields on the growth ofBacillus subtllla
Raso, J., Palop, A., Pagan, R. and Condon, S. 1998b. Inactivation of Bacillus subtllla spores by spores. IFT Annual Meeting: Book of Abstracts. 267.
combining ultrasonic waves under preuure and mild heat treatment. J Appl Microbial. Simpson, R. K. and Gilmour, A. 1997a. The effect of high hydrostatic preuure on Uaterla
85:849-854. monocytogenes In phosphate-buffered saline and model food systems. J Appl Microbial.
Raso, J., Barbosa-Canovas, G. V. and Swanson, B. G. 1998c. Initiation of germination and 83:181-188.
inactivation by high hydrostatic preuure of Bacillus cereus aporulated at different tem Simpson, R. K. and Gilmour, A. 1997b. The effect ofhigh hydrostatic pressure on the activity
peratures. !FT Annual Meeting: Book of Abstracts. Atlanta, GA. 154. of intracellular enzymes of Usterla monocytogenes. Let Appl Microbial. 25:48-53.
Raso, J.. Gongora, M.. Barbosa-Canovas. G. V. and Swanson, B. G. 1998d. Effect of pH and Sltzmann, V. 1995. High voltage pulse techniques for food preservation. G. W. Gould. New
water activity on the Initiation of germination and Inactivation of Bacillus cereus by high methods for food preservation. London, UK. Blackie Academic and Profe11lonal. 236-252.
hydrostatic pressure. IFT Annual Meeting: Book of Abstracts. Atlanta, GA. 153. Skauen, D. 1976. A comparison of heat production and cavitation Intensity In several ultra
Reddy, N. R.. Solomon, H. M., Fingerhut, G., Baluubramanlam, V. M. and Rhodehamel, B. sonic cell disrupten. Ultrasonics. 14:173-176.
J. 1999. Inactivation of Clostrldlum botullnum types A and B spores by high-pressure Smelt, J. RR M., Rljke, A.G. F. and Hayhunt, A. 1994. Po11lble mechanism of high pre11ure
processing. IFT Annual Meeting: Book of Abstracts. National Center for Food Safety and Inactivation of microorganisms. High Pre11 Res. 12:199-203.
Technology, Illinois Inst of Technology. p. 33 Chicago, IL. Smelt, J. RR 1998. Recent advances in the microbiology ofhigh pressure proceuing. Trends
Reina, L D., Jin. z. T.. Yousef, A. B. and Zhang. Q. H. 1998. Inactivation of Uateria monocy Food Sci Technol. 9:152-158.
togenes in mill< by pulsed electric field. J Food Protect. 81(9):1203-1206. Smelt, J.P. P. M. and HeUemons, J.C. 1998. High pre11ure treatment in relation to quantitative
Reznik, D. L. 1999. Personal communication. Raztek Corp, Sunnyvale, CA. risk assessment. VTT Symposium. Espoo: Technical Research Centre of Finland. 27-38.
Roberts, C. M. and Hoover, D. G. 1996. Sensitivity of Bacillus coagulans spores to combina Sonolke, K.. Setoyama, K. and Kobayuhl, S. 1992. Effect ofpre11ure and temperature on the
tions of high hydrostatic preuure, heat acidity, and nlsln. J Applied Bacterial. 81 :363-368. death rates of lactobaclllus easel and escherlchia coll. C. Balny, R. Hayuhl, K. Heremans
Rocourt, J. and Cossart, R 1997. Usterla monocytogenes. M. R Doyle, LR. Beauchat and T. and R Masson. High Pre11ure and Biotechnology. 224:297-301
J. Montville(eds.). Food Microbiology: Fundamentals and Frontlen. Washington, D.C. Standsted. 2000. Penonal communication. Standsted Fluid Power, Ltd. Standsted, Essex
American Society for Microbiology. 337-352. CM24 8HT, UK.
Romine, A. and Barringer, S. A. 1998. Dielectric properties of ham as a function of temper Stenstrom, L.A. 1974. Method and apparatus for treating heat-sensitive products. Alfa
ature, moisture, and salt. Atlanta, GA. LsvalAB. US Patent 3,809,844.
Rose, J. B. and Slifko, T. R. 1999. Glardia, Cryptosporldium and Cycloapora and their Impact Stewart, C. M., JewettJr., F. F., Dunne, C. Rand Hoover, D. G. 1997. Effect ofconcurrent high
on foods, a review. J Food Protect. 62:1059-1070. hydrostatic pre11ure, acidity and heat on the injury and destruction ofUsterla monocy
Rosen, C.-G. 1972. Effects of microwaves on food and related materials. Food Technol. togenes. J Food Safety. 17:23-36.
26(7) :36-40, 55. Stumpf, R K., Green, D. B. and Smith, F. W. J. 1946. Ultrasonic disintegration as a method of
Rosenbauer, G. 1997. Continuous Induction heating ofllqulda. Research Institute for Food extracting bacterial enzymes. J Bacterial. 51 :487-493.
Technology and Utilization, Technical University of Munich. Unpubllahed. Styles, M. F., Hoover, D. G. and Farkas, D. F. 1991. Response ofUsterla monocytogenes and
Rosenberg, U. and Bllgl, W. 1987. Microwave puteurlzation, sterillzatlon, blanching, and Vibrio parahaemolyticus to high hydrostatic pressure. J Food Sci. 56(5):1404-1407.
pest control in the food industry. Food Technol. 41(6):92-99. Suzuki, C. and Suzuki, K. 1962. The protein denaturatlon by high pre11ure. J Biochem. 52:67
Roussy, G. and Pearce, J. 1995. Foundations and industrial applications of microwaves and 71.
radio frequency fields. New York. Wiley. Suzuki. K. and Taniguchi, T. 1972. Effect ofpre11ure on biopolymen and model systems. M.
Rovere, R, Toaorarti, D. and Maal, A. 1996a. Prove di sterlllzzazlone a 15.000 bar per ottenere A. Sleigh and A. G. Macdonald. The Effect of Pre11ure on Uvlng Organiams. New York.
la stab Illta mlcrobiologlca ed enzlmatlca. Industrle Allmentarl. XXXV: I 082-1065. Academic Presa Inc. 103.
Rovere, R, Cerpl, G., Dall'Agllo, G., Gola, S., Maai, A., MlglloU, L and Scararnuzza, N. 1996b. Sytnlk. l. A. and Sytnlk, l. A. 1967. The influence of electrohydraulic effect on microorgan
High-pressure heat treatments: Evaluation of the sterilizing effect and of thermal dam isms. TrStavropoiskogosxin-ta.13:514-522.
age. lndustrla Conserve. 71:473-483. Tajchakavlt, S. and Ramaswamy, H. S. 1995. Continuous-flow microwave healing oforange
Ruan, R., Chen. P., Chang. K.. Kim, H.-J. and Taub, I. A. 1999. Rapid food particle temperature Juice: evidence ofnonthermal effects. International Microwave Power Institute. 30(3): 141
mapping during ohmic heating using PLASH MRI. J Food Sci. 84(6):1024-1026. 148.
Russell, N. J., Evans. R.1., ter Steeg, RF., Hellemons, J., Verheul, A. and Abee, T. 1995. Mem Tanaka, T. and Hatanalta, K. 1992. Application of hydrostatic pre11ure to yoghurt to prevent
branes as a target for stress adaptation. Int J Food Microbial. 28:255-261. its after-acidification. Nippon Shokuhln Kogyo Galtkaishi () Japanese Society for Food
Ryynanen, S. and Ohlsson, T. 1996. Microwave heating uniformity of ready meals as affected Science and Technology). 39(2):173-177.
by placement, composition, and geometry. J Food Sci. 61(3):620-624. Taub, I. A., Xaprlellan, R. A., Halliday, J. W., Walker, J.B.. Angelini, Rand Merrit Jr, C. 1979.
Sale, A. J. H. and Hamilton, W. A. 1967. Effects of high electric fields on microorganisms l. Facton affecting radlolytic effects in food. Radiated Physical Chemistry. 14:639-653.
Killing of bacteria and yeast. Blochlmt Blophys Acta. 148:781-788. Tauscher, B. K. 1998. Effect of high pressure treatment to nutritive substances and natural
Sale, A. J. H., Gould, G. W. and Hamilton. W. A. 1970. Inactivation of bacterial spores by pigments. Fresh Novel Foods by High Pressure. VTT Symposium 186. Technical Research
hydrostatic pressure. J Gen Microbial. 80:323-334. Centre of Finland. Helllnld, Finland.
Sale, A. J. H. 1976. A review of microwave for food processing. J Food Technol. 11 :319-329. Tauscher, B. 1999. High pressure and chemical reactions: effects on nutrients and pigments.
Salengke, S. and Sastry, S. K. 1999. Comparative modeling study of ohmic heating ofsolld Emerging Food Science and Technology. Tempere, Finland. November 22-24, 1999. 58.
llquld mixtures. 1999 !FT Annual Meeting. Chicago. July 24-28 1999. Teotla, J. S. and Miller, B. F. 1975. Destruction of salmonellae on poultry meat with lysozyme,
Saltiel, C. and Datta, A. K. 1998. Heat and mass transfer in microwave processing. Adv Heat BDTA, X-ray, microwave and chlorine. Poul Sci. 54:1388-1394.
Transfer. 33: 1-94. Thompson, J. S. and Thompson, A. 1990. In-home puteurlzatlon of raw goat's milk by
Sams, A. R. and Feria, R. 199 I. Microbial effects of ultruonication of broiler drumstick skin. microwave treatment. International J Food Mlcrobioi. 10:59-84.
J Food Sci. 56(1):247-248. Thome, S.(Bd.) 1991. Food Irradiation. Elsevier Applied Science. London.
San-Martin, M.F., Harte, F.M., Barbosa-Cd.novas, G.V., and Swanson, B.G. 1999. Magnetic Timson, W. J. and Short, A. J. 1965. Resistance of microorganisms to hydrostatic pre11ure.
field u a potential non-thermal technology for the inactivation of microorganisms. Blotechnol and Bloeng. Vll:139-159.
Washington State Unlvenity, Biological Systems Engineering. Pullman, WA., USA. (Un Ting. B. 1999. Personal Communication. Flow International, Kent, WA.
published). Tops, R. 2000. Managing Director, Tops Foods, Lammerldes 26. Olen, Belgium Phone:00-32
Sastry, S. K. 1992. A model for heating ofllquld-particle mixtures in a continuous Dow ohmic (0l 14.28.55.80 Pax: 00-32-(0) 14.22.61.50.
heater. J Food Process Bng. 15:263-278. Tsang. T. Y. 1990. Electrical modulation of membrane proteins: Enforced conformational
Sastry, S. K. and Palaniappan, S. 1992. Mathematical modeling and experimental studies on oscillations and biological energy signals. Annu Rev Biophys Chem. 19:83-106.
ohmic heating ofllquld-particle mixtures in a static heater. J Food Proce11 Bng. 15:241 Tsuchiya, K., Nakamura, K., Okuno, X., Ano, T. and Shoda, M. 1996. Effect of homogeneous
261. and Inhomogeneous high magnetic fields on the growth of Escherichia coll. I Ferment
Sastry, S. K. 1994. Ohmic heating. R. P. Singh and F. A. R. Oliveira. Minimal Proceaalng of Foods Bloeng81(4):343-346.
an d Proce11 Optimization: an Interface. Boca Raton, FL CRC Pre11, Jnc. 17-33. van Boekel, M.A. J. S. I996. Stastical upects ofkinetic modeling for food science problems.
Sastry, S. K. and U, Q. 1996. Modeling the ohmic heating offoods. Food Technol. 50(5):246 J Food Sci. 61:477-485.
248. Van Loey. A., Hendrickx, M.. De Cordi, S., Haentjens, T. and Tobback, P. 1996. Quantative
Sutry, S. K. and Salengke, S. 1998. Ohmic heating of solid-liquid mixtures: a comparison of evaluation of thermal process using time temperature Integrators. Trends Food Sci Tech
mathematical models under wont-cue heating conditions. J Food Proce11 Bng. 21:441 nol. 7(1):16-26.
458. Van Noatran, F.B., Reynolds, R.J. and Hedrick. H.G. 1967. Effects of a high magnetic field at
Satomi, M. Yamaguchi, T., Okuzuml, M. and Fujii, T. 1995a. Effect of conditions on the different osmotic pressures and temperatures on multiplication of Saccharomyces cere
barotolerance of Escherichia coll. Shokuhln Biselgaltu Zasshi (J of Food Hyg Soc Japan). vlsiae. Appl Microbial. 15: 561-563.
36(1):29-34. Varnam, A.H. and Bvana, M. G. 1991. Foodbome Pathogens: An Illustrated Text. London.
Satomi, M. Yamaguchi, T.. Okuzuml, M. and Pujii, T. 1995b. Effect of several conditions on Wolfe Publishing. Ltd. 51-377.
the recovery of pressure-Injured bacteria. Shokuhln Blseigaltu Zasshl () of Food Hyg Soc Vega-Mercado, H., Powen. J. R., Barbosa-C4novas, G. V. and Swanson, B. G. 1995. Plumin
Japan). 36(3):344-351. inactivation with pulsed electric fields. I Food Sci. 60(5): JJ 43-1146.
Schlegel, W. 1992. Commercial pasteurization and sterilization of food products using mi Vega-Mercado, H., Martin-Belloso, 0., Chang, F.-J.. Barbosa-Canovas, G. V. and Swanson, B.
crowave technology. Food Technol. 46(12):62-63. G. 1996a. Inactivation ofBscherlchla coll and Bacillus subtilis suspended in pea soup using
Schnepf, M. and Barbeau, W. B. 1989. Survival ofSalmonella typhlmurium In routing chick pulsed electric fields. J Food ProceH Pres. 20(6):501-5 JO.
ens cooked In a microwave, convention microwave and conventional electric oven. J Vega-Mercado, H., Pothaltamury, U. R., Chang, F.-J.. Barbosa-Cd.novas, G. V. and Swanson, B.
Food Safety. 9:245-252. G. 1996b. Inactivation of Escherichia coll by combining pH, ionic strength and pulled
Schoenbach, K. H., Peterkin, F. B., Alden, R. W. and Beebe, S. J. 1997. The effect of pulsed electric fields hurdles. Food Res Int. 29(2):117-121.
electric fields on biological cells: Experiments and applications. JEBB Trana Plasma Sci. Vega-Mercado, H.1996c. Inactivation of proteolytic enzymes and selected microorganisms
25(2):284-292. in foods using pulsed electric fields. Biological Systems Engineering. Pullman, WA. Wash
Sensoy. I., Zhang, Q. H. and Sastry, S. K. 1997. Inactivation kinetics of Salmonella dublln by ington State Unlvenity.
pulsed electric field. J Food Process Eng. 20:367-381. Vega-Mercado, H., Martin-Belloso, o.. Qin, B.-L, Chang. F.-J., Gongora-Nieto, M. M., Bar
Seyderhelm, I. and Knorr, D. 1992. Reduction of Bacillus stearothermophilus spores by bosa-C4novu, G. V. and Swanson, B. G. 1997. Non-thermal food preservation: pulsed
combined high pre11ure and temperature treatments. ZFL Bur Food Sci. 43:17. electrlcflelda. Trends Food Sci Technol. 8(5):151-157.
Shlgehisa, T.. Ohmori, T., Saito, A., Taji, S. and Hayuhl, R. 1991. Effects of high hydrostatic Vega-Mercado, H., Gongora-Nieto, M. M., Barboaa-Canovas, G. V. and Swanson, B. G. 1999.
pre11ure on characteristics ofpork slurries and inactivation of microorganlama associated Nonthermal preservation of liquid foods using pulsed electric fields. Handbook of Food
with meat and meat products. Int J Microbial. 12:207-216. Preservation. M. S. Rahman. Marcel Dekker, Inc. New York.
Shigehisa, T.. Nakagami, H.. Ohno, H., Okate, T.. Mori, H., Kawabata, T., Morimoto, M. and Vela, G. R. and Wu, J. F. 1979. Mechaniam of lethal action of2,450-MHz radiation on micro

Supplement-JOURNAL Of' FOOD 8C1BMCB 107

.JFS SUPPLEMENT: Kinetics of Microbial Inactivation for Alternative Food Proceeelng Technologies
organism. Appl Environ Microbiol. 37(3):550-553. Yin, Y., Zhang, Q. H. and Sastry, S. K. 1997. High voltage pulsed electric field treatment
Villamiel, M., LopezFandino, R. and Olano, A. 1997. Microwave pasteurization of milk in a chambers for the preservation of liquid food products. Ohio State University. US Patent
continuous flow unit. Effects on the cheese-making properties of goat's milk. Milchwls 5,690,978.
senschaft. 52( I ):29-32. Yoshimura, N. 1989. Application of magnetic action for sterilization of food. Shokukin
Vollmer, A. C., Everbach, E. C., Halpern, M. and Kwakye, S. 1998. Bacterial stress responses to Kihatsu 24(3):46-48.
I-megahertz pulsed ultrasound in the presence of microbubbles. Appl Environ! Micro Zhang, L. and Fryer, P. J. 1993. Models for the electrical heating of solid-liquid mixtures.
biol. 64(10):3927 -3931. Chem Eng Sci. 48:633-643.
Wang, W.-C. 1995. Ohmic heating offoods: physical properties and applications. Columbus, Zhang, Q. H., Monsalve-Gonzalez, A., Barbosa-Canovas, G. V. and Swanson, B. G. 1994a.
OH. The Ohio State University. Inactivation ofE. coli and S. cerevisiae by pulsed electric fields under controlled temper
Weemaes, C., Ooms, V., lndrawati, L., Ludikhuyze, I., Van den Broeck, A., van Loey, A. and ature conditions. Transactions of the ASAE. 37(2):581-587.
Hendrickx, M. 1999. Pressure-temperature degridation of green color in broccoli juice. I Zhang, Q. H., Chang, F.-J. and Barbosa-Canovas, G. V. 1994b. lnactivation of microorganisms
Food Sci. 64:504-508. in a semisolid model food using high voltage pulsed electric fields. Lebensm Wiss Technol.
Wei, C. I., Balaban, M. 0., Fernando, S. Y. and Peplow, A. J. 1991. Bacterial effect of high 27(6):538-543.
pressure CO, treatment of foods spiked with Listeria or Salmonella. I Food Protect. Zhang, Q. H., Qin, B.-L., Barbosa-Canovas, G. V. and Swanson, B. G. 1995a. Inactivation of
54(3):189-193. E.coli for food pasteurization by high-strength pulsed electric fields. I Food Process Pres.
Weiss, K. F. and Strong, D. H. 1967. Some properties of heat-resistant and heat-sensitive 19(2):103-118.
strains of clostridium perfringens. I. Heat resistance and toxigenicity. I Bacteriol. 93:21-26. Zhang, Q. H.. Barbosa-Canovas, G. V. and Swanson, B. G. 1995b. Engineering aspects of
Welt, B. A. and Tong, C. H. 1993. Effect of microwave radiation on thiamin degradation pulsed electric field pasteurization. I Food Eng. 25(2):261-281.
kinetics. I Microwave Power Electromagnetic Energy. 28(4):187-195. Zhang, Q. H., Qiu, X. and Sharma, S. K. 1997. Recent development in pulsed electric field
Welt, B. A., Street, J. A., Tong, C.H., Rossen, J. L. and Lund, D. B. 1993. Utilization of micro processing. Washington, DC. National Food Processors Association. New Technologies
waves in the study of reaction kinetics in liquid and semi-solid media. Biotechnol Prog. Yearbook. 31-42.
9:481-487. Zhang, H. and Datta, A. K. 1999. Coupled electromagnetic and thermal modeling of micro
Wesley, R. H. 1971. Bacteria destruction methods. USA 3,594, ll 5. wave oven heating of foods. J Microwave Power Electromagnetic Energy. 43.
Wig, T., Tang, J., Younce, F., Hallberg, L., Dunne, C. P. and Koral, T. 1999. Radio frequency Zhang, H., Datta, A. K., Taub, I. and Doona, C. 1999. Experimental and numerical investiga
sterilization of military group rations. AIChE Annual Meeting. tion of microwave sterilization of solid foods. Accepted pending revision in AIChE Jour
Wilson, D. C. 1974. High pressure sterilization. 34th Annual Meeting of the Institute ofFood nal.
Technologists. New Orleans, LA. May 12-15. Zhang, H. and Datta, A. K. 2000. Electromagnetics of Microwave Heating: Magnitude and
Worobo, R. W.. Churey, J. J. and Padilla-Zakour, 0. 1998. Apple cider: treatment options to Uniformity of Energy Absorption in an Oven. A. K. Datta and R.C. Anatheswaran(eds.).
comply with new regulations. I Assoc Food Drug Officials. December:19-25. Handbook of Microwave Technology For Food Applications. New York. Marcel Dekker,
Worobo, R. W. 2000. Efficacy of the CiderSure 3500 ultraviolet light unit in apple cider. Inc.
Ithaca, NY. Cornell University, Department of Food Science and Technology. 1-6. Zimmermann, U. and Benz, R. 1980. Dependence of the electrical breakdown voltage on the
Wouters, P. C., Glaasker, E. and Smelt, I. P. P. M. 1998. Effects ofhigh pressure on inactivation charging time in Valonia utricularis. I Membrane Biol. 53:33-43
kinetics and events related to proton eftlux in Lactobacillus plantarum. Appl Environ Zimmermann, U. 1986. Electrical breakdown, electropermeabilization and electrofusion.
Microbiol. 64(2):509-514. Rev Physiol Biochem Pharmacol. 105:175-256.
Wuytack, E. Y., Boven, S. and Michiels, C. W. 1998. Comparative study of pressure-induced Zimmermann, W. J. 1983. Evaluation of microwave cooking procedures and ovens for de
germination of Bacillus subtilis spores at low and high pressure. A Environ Microbiol. vitalizing trichinae in pork roasts. J Food Sci. 48:856-860, 899.
64:3220-3224. ZoBell, C. E. 1970. Pressure effects on morphology and life process of bacteria. A. M.
Wyslouzil, W. and Kashyap, S. C. 1976. Microwave sterilization of pea flour and pea protein Zimmermann(Ed.). High pressure effects on cellular processes. New York. Academic Press
concentrate. J Microwave Power. 11(2):212-213. Inc. 85-130.
Yano, Y., Nakayama.A., Kishihara, S. and Saito, H. 1998. Adaptive changes in membrane lipids Zook, C. D., Parish, M. E., Braddock, R. J. and Balaban, M. 0. 1999. High pressure inactivation
ofbarophillc bacteria in response to changes in growth pressure. Appl Environ Microbiol. kinetics of Saccharomyces cerevisiae ascospores in orange and apple juice. J Food Sci.
64:479-485. 64(3):533-535.

108 JOURNAL. OP FOOD SCIENCE-Supplement