Scribd
Upload
61 views

Thermal Overload Parameter Values (Range) Unit Step Default

This document describes the parameters, values, units, and default settings for various motor protection functions, including thermal overload protection, stall protection, phase failure protection, and underload protection. Parameters include trip levels, trip delays, alarm levels, and whether functions are enabled or disabled. The document provides technical specifications for configuring motor protection settings.

Uploaded by

swagata12345
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
61 views

Thermal Overload Parameter Values (Range) Unit Step Default

This document describes the parameters, values, units, and default settings for various motor protection functions, including thermal overload protection, stall protection, phase failure protection, and underload protection. Parameters include trip levels, trip delays, alarm levels, and whether functions are enabled or disabled. The document provides technical specifications for configuring motor protection settings.

Uploaded by

swagata12345
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

THERMAL OVERLOAD

Parameter Values (Range) Unit Step Default

FUNCTION 0-1-2 1 1

DISABLED DURING START UP 0-1 0

THERMAL MODEL 0-1 0

T6 3-40 Sec 1 6

COOL COEFFICIENT 1-10 1 4


TOL ALARM LEVEL 60-100 % 1 90
TOL TRIP LEVEL 60-100 % 1 100
TOL RESET LEVEL 10-60 % 1 50
AMBIENT TEMPERATURE 0-80 C 5 40

STALL PROTECTION
Parameter Values (Range) Unit Step Default

FUNCTION 0-1 1 1

TRIP RESET MODE 2-3-4 1 4


TRIP LEVEL 120-800 % 10 400
TRIP DELAY 0-25 SEC 0.1 0.5

LONG START PROTECTION

Parameter Values (Range) Unit Step Default

FUNCTION 0-1 1 1
LOCKED ROTOR LEVEL 120-800 % 10 120
TRIP DELAY 0-250 SEC 0.1 10
TRIP RESET MODE 2-3-4 1 4

PHASE FAILURE PROTECTION

Parameter Values (Range) Unit Step Default

FUNCTION 0-1,3 1 0

ALARM 10-90 % 1 80
TRIP 10-90 % 1 70
TRIP DELAY 0-60 SEC 1 10
TRIP RESET MODE 2-3-4 1 4

UNBALANCE PROTECTION

Parameter Values (Range) Unit Step Default

FUNCTION 0-1,3 1 0

ALARM 50-90 % 1 90
TRIP 50-90 % 1 85
TRIP DELAY 0-60 SEC 1 10
TRIP RESET MODE 2-3-4 1 4

UNDERLOAD PROTECTION

Parameter Values (Range) Unit Step Default

FUNCTION 0-1,3 1 0

ALARM 20-90 % 1 30
TRIP 5-90 % 1 20
TRIP DELAY 0-1800 SEC 1 10
TRIP RESET MODE 2-3-4 1 4

EARTH FAULT PROTECTION


Parameter Values (Range) Unit Step Default

FUNCTION 0-1,3 1 0

ALARM 100-3000 mA 100 500


TRIP 100-3000 mA 100 800
TRIP DELAY 0.2-60 SEC 0.1 10
TRIP RESET MODE 2-3-4 1 4

START LIMITATION PROTECTION

Parameter Values (Range) Unit Step Default

FUNCTION 0-1 1 0

TIME INTERVAL 1-600 MIN 1 1


NUMBER OF STARTS 2-100 1 2
Description

0=DISABLED; 1= ENABLED; 2=
DISABLED DURING START

0=ENABLED DURING START UP;


1= DISABLED DURING START UP

0=STANDARD MODEL; 1= EEXe


MODEL

Trip time for current IL


max=6xIn from the cold state

TIMES START TIME CONSTANT


THERMAL OL ALARM LEVEL
THERMAL OL TRIP LEVEL
THERMAL OL RESET LEVEL
AMBIENT

Description

0=DISABLED; 1= ENABLED;

2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE
STALL PROTECTION TRIP
STALL AFTER START UP

Description

0=DISABLED; 1= ENABLED;
ROTOR LOCKED DURING START UP PROTECTION TRIP
LONG START UP TRIP DELAY
2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE

Description

0=DISABLED; 1= ENABLED; 3=
ALARM ONLY

IL MIN/ILMAX
IL MIN/ILMAX
PHASE FAILURE TRIP DELAY
2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE

Description

0=DISABLED; 1= ENABLED; 3=
ALARM ONLY

IL MIN/ILMAX
IL MIN/ILMAX
UNBALANCE PROTECTION TRIP DELAY
2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE

Description

0=DISABLED; 1= ENABLED; 3=
ALARM ONLY

IL MAX/IRATED
IL MAX/IRATED
UNDERLOAD PROTECTION TRIP DELAY
2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE
Description

0=DISABLED; 1= ENABLED; 3=
ALARM ONLY

I0
I0
EARTH FAULT TRIP DELAY
2=LOCAL;3=REMOTE; 4= LOCAL/REMOTE

Description

0=DISABLED; 1= ENABLED;

TIME INTERVAL FOR NUMBER OF STARTS


NUMBER OF STARTS WITHIN THE DURATION

You might also like