Scribd
Upload
176 views

TCP Ip

The TCP/IP reference model was developed by DARPA to connect remote machines in a flexible architecture. It features support for easy expansion and robust connections. The model defines four layers - the lowest host-to-network layer handles physical connections, the internet layer routes packets independently using IP, the transport layer handles segmentation and sequencing, and the application layer defines protocols like HTTP, FTP, and email. The TCP/IP model was designed to allow applications on one computer to communicate with those on another in a scalable client-server fashion.

Uploaded by

sangeetadinesh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
176 views

TCP Ip

The TCP/IP reference model was developed by DARPA to connect remote machines in a flexible architecture. It features support for easy expansion and robust connections. The model defines four layers - the lowest host-to-network layer handles physical connections, the internet layer routes packets independently using IP, the transport layer handles segmentation and sequencing, and the application layer defines protocols like HTTP, FTP, and email. The TCP/IP model was designed to allow applications on one computer to communicate with those on another in a scalable client-server fashion.

Uploaded by

sangeetadinesh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

#)The TCP/IP Reference Model

TCP/IP means Transmission Control Protocol and Internet Protocol. It is the network model used
in the current Internet architecture as well. Protocols are set of rules which govern every possible
communication over a network. These protocols describe the movement of data between the
source and destination or the internet. These protocols offer simple naming and addressing
schemes.

Overview of TCP/IP reference model


TCP/IP that is Transmission Control Protocol and Internet Protocol was developed by
Department of Defence's Project Research Agency (ARPA, later DARPA) as a part of a research
project of network interconnection to connect remote machines.
The features that stood out during the research, which led to making the TCP/IP reference model
were:

Support for a flexible architecture. Adding more machines to a network was easy.
The network was robust, and connections remained intact untill the source and destination
machines were functioning.

The overall idea was to allow one application on one computer to talk to(send data packets)
another application running on different computer.

Description of different TCP/IP protocols


Layer 1: Host-to-network Layer

1. Lowest layer of the all.


2. Protocol is used to connect to the host, so that the packets can be sent over it.
3. Varies from host to host and network to network.

Layer 2: Internet layer

1. Selection of a packet switching network which is based on a connectionless internetwork


layer is called a internet layer.
2. It is the layer which holds the whole architecture together.
3. It helps the packet to travel independently to the destination.
4. Order in which packets are received is different from the way they are sent.
5. IP (Internet Protocol) is used in this layer.

Layer 3: Transport Layer

1. It decides if data transmission should be on parallel path or single path.Functions such as


multiplexing, segmenting or splitting on the data is done by transport layer.
2. The applications can read and write to the transport layer.
3. Transport layer adds header information to the data.
4. Transport layer breaks the message (data) into small units so that they are handled more
efficiently by the network layer.
5. Transport layer also arrange the packets to be sent, in sequence.

Layer 4: Application Layer


The TCP/IP specifications described a lot of applications that were at the top of the protocol
stack. Some of them were TELNET, FTP, SMTP, DNS etc.

1. TELNET is a two-way communication protocol which allows connecting to a remote


machine and run applications on it.
2. FTP(File Transfer Protocol) is a protocol, that allows File transfer amongst computer users
connected over a network. It is reliable, simple and efficient.
3. SMTP(Simple Mail Transport Protocol) is a protocol, which is used to transport electronic
mail between a source and destination, directed via a route.
4. DNS(Domain Name Server) resolves an IP address into a textual address for Hosts connected
over a network.
Merits of TCP/IP model

1. It operated independently.
2. It is scalable.
3. Client/server architecture.
4. Supports a number of routing protocols.
5. Can be used to establish a connection between two computers.

Demerits of TCP/IP

1. In this, the transport layer does not guarantee delivery of packets.


2. The model cannot be used in any other application.
3. Replacing protocol is not easy.
4. It has not clearly separated its services, interfaces and protocols.

You might also like