Manual Fusor
Manual Fusor
Version 1.0
USER GUIDE
1
2013 Kalloc Studios, Inc. All Rights Reserved. Except as otherwise permitted by Kalloc Studios., this publication, or parts thereof,
may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with
the permission of the copyright holder.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY KALLOC STUDIOS "AS IS." KALLOC STUDIOS
DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Government Use
Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer
Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable.
2
Contents
4 Chapter 1: Fuzor at a Glance
4 Fuzor Overview
4 User Interface
5 Fuzor Icons
7 Revit Icons
8 Chapter 2: Essentials
8 Syncing Fuzor and Revit
8 Using View Sync
8 Clearing a Fuzor Scene
9 Generating and Loading a Cache File
9 Using Edit Selection
10 Chapter 3: Glossary
3
Chapter 1
Fuzor at a Glance
Fuzor Overview
Fuzor is a real-time building simulator which generates interactive emulations of your building information
models as they are developed in Autodesk Revit. Its purpose is to provide designers and architects with a
powerful palette of analysis and visualization tools by extending the functionality of Autodesk Revit without
interrupting your production workflow. Fuzor is fully integrated into Revit, which means that all of your models'
characteristics are translated into an interactive environment without the need for importing and exporting
files.
User Interface
Fuzor has two sets of menus. The in Revit menu, and in Fuzor menu. The in Revit menu will be the home to all
controls that will synchronize Revit and Fuzor. The Fuzor menu will provide the user with navigation, scene
controls, and screen capture and cinematic controls.
To access the Fuzor menu in Revit: Go to the Ribbon (toolbar) tab named Kalloc Fuzor Tech
These icons will have a gray background.
To access the menu in Fuzor: Select a menu icon (top to bottom) to view additional commands (left
to right).
These icons will have a black background
4
Fuzor Icons
Revit Enable the default Revit controls to navigate the Fuzor world
Free Move Enable the default Navis controls to navigate the Fuzor world
Auto Rotate Sets the Fuzor camera to rotate around the scene
Avatar Allows the user to use an in world Avatar to navigate their scene
Drop Avatar Drops an Avatar into the scene and changes the controls to Avatar
Weather Users control the weather from sunny skies to thunderclouds and rain
Time Of Day Users can change the time of day that will cycle through a 24 hour day
HDR Toggle HDR ( High Dynamic Range ) on/off in the Fuzor world
Ground Plane Users can place a ground plane in the Fuzor world
Measure Tool Provides various methods for the users to take measurements in the Fuzor world
5
Fuzor Feature Controls
Auto Rotate UI Controls
Rotate Direction Controls the direction and speed of the rotation. Middle position stops the rotation
Horizontal Rotate Rotates the camera on a horizontal axis to the scene
Vertical Rotate Rotates the camera on a vertical axis to the scene
Toggle Gender Toggles the Avatar gender between male and female
Child Changes the Avatar to a child
Handy cap Places the Avatar in the wheelchair ( disabled when child avatar is active )
Sunny When the slider is at this point the weather is at its sunniest
Thunderclouds When the slider is at this point the weather is at its stormiest
Noon When the slider is at this point the time of day is noon
Midnight When the slider is at this point it is midnight
Stop This will stop the time of day animation cycle
Play This will loop the time of day from the position of the slider
Speed X2 Increases the speed of the animation by 2
Speed X4 Increases the speed of the animation by 4
HDR UI Controls
6
Revit Icons
Launch Fuzor Launches the Fuzor application and starts the Fuzor Synchronization process
View Sync On Syncs Fuzor's and Revits cameras, now both camera share information
View Sync Off Turns the Fuzor and Revit camera sync off
Edit Selection Syncs the selected object in Fuzor back to Revit and enables editing
Finish Edit Returns Fuzor's camera to its previous position prior to the edit selection
7
Chapter 2
Essentials
This section will get you going with Fuzor so that you can incorporate building simulation technology into your
Revit workflow. For information about changing specific parameters within the environment, please refer to
Chapter 4, Advanced Features.
Once your Revit file is open navigate to the Kalloc Fuzor Tech tab and click Launch Fuzor. This will
start the synchronization process, passing all Revits scene information into Fuzor. Users will be able to watch
the synchronization progress in the lower left corner of Fuzors window. Once the initial synchronization is
complete a second synchronization will start. The second synchronization is passing all of the material
information into Fuzor. During the second synchronization you are able to navigate your project.
With View Sync enabled users will also be able to use Fuzor's Edit Selection options. Edit Selection
will sync back to Revit the object that is selected in Fuzor. Once users are done editing the object they can click
on Finish Edit . Finish Edit will set the users camera back to its last synced position and layer.
8
Generating and Loading a Cache File
Cache files are a convenient way to save out your Fuzor scenes. Cache files will hold all of your projects
information, allowing you to reload the project into Fuzor without having to do a Revit to Fuzor synchronization.
However, cache files WILL NOT synchronize back up with your Revit files. If you would like to make changes to
your scene file through Fuzor you will have to do a Revit to Fuzor synchronization. Cache files are a fast and
easy way to load your work into Fuzor and show off your project.
To create a cache file, synchronize your current Revit project with Fuzor. When the synchronization is complete
click the Generate Cache button in the Kalloc Fuzor Tech tab in Revit. A navigation window will open
allowing the user to select the desired save location, the default location is the users
Documents/Fuzor/Downloads.
Loading a cache file is as simple as dragging your saved cache file into an empty Fuzor world. This action will
clear out any information that is in the current Fuzor scene, and start the loading process for the cache file. A
cache file cannot be linked back to a Revit scene. There is no connection between a saved cache file and a Revit
file. Saved cache files are can only be loaded into a Fuzor scene.
9
Chapter 3
Glossary
BIM: Building Information Modeling, an approach used in building design which utilizes user
data to facilitate manual drafting.
Building Simulation: An interactive analysis and visualization tool designed to extend the functionality of
Autodesk Revit during the schematic design and design development phases of
construction.
Collaboration: Linking multiple Revit files with shared coordinates together into a single host file for
the purpose of dividing workloads and maximizing computer performance. This may or
may not indicate that work sets are in use.
Family: A subcategory of .RVT files which can be imported to and modified in a host file.
Parameter: A user controlled variable which will influence the performance of model elements
either independently or in relation to other elements.
Ribbon: An intelligent user interface featuring a toolbar which updates in response to user
behaviors.
User Interface: A set of intuitive controls intended to simplify complex tasks with buttons, sliders, and
parameter values.
Work set: A Revit file which has been processed to allow multiple users to work on a single project
simultaneously. This is a separate process from collaboration.
10