Scribd
Upload
115 views3 pages

BS EN 771-3: 2013 Dense Concrete Blocks 100DS7

This document contains information about concrete masonry units produced by WDL Concrete Products Ltd. It includes specifications for 140mm x 215mm x 440mm solid concrete blocks with a mean compressive strength of 7.3N/mm^2 that are intended for use in walls, columns, and partitions. Performance characteristics such as dimensions, density, thermal conductivity, and reaction to fire are provided. The manufacturer declares that the blocks conform to the appropriate European standards.

Uploaded by

grtuna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views3 pages

BS EN 771-3: 2013 Dense Concrete Blocks 100DS7

This document contains information about concrete masonry units produced by WDL Concrete Products Ltd. It includes specifications for 140mm x 215mm x 440mm solid concrete blocks with a mean compressive strength of 7.3N/mm^2 that are intended for use in walls, columns, and partitions. Performance characteristics such as dimensions, density, thermal conductivity, and reaction to fire are provided. The manufacturer declares that the blocks conform to the appropriate European standards.

Uploaded by

grtuna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

2013

Dense Concrete Blocks


WDL (Concrete Products Ltd
100DS7
Stuart Quarry Penderyn Hirwaun R.C.T. CF44 9JY
CATEGORY 11 440X100X215mm Concrete masonry units
CF44 9JY
Dimensions: 440mmx100mmx215mm BS EN 771-3
2013

Medium Density Standard Blocks 7.3Nmm2

140MS7
CATEGORY ll 440X215X140mm Concrete masonry units

Dimension Tolerances:

Category: D1

Flatness: NPD

Parallesmelism: NPD

Configuration: Solid

2
Mean compressive strength: 7.3 Nmm

Dimension Stability: Moister movement < 0.55mm/m

2
Shear Bond strength Fixed value 0.15Nmm

Flexural bond strength: NPD

Reaction to fire: Euroclass A1

Water absorption: NPD

Water Vapour diffusion coefficient: Fixed value 5/12

Direct airborne sound insulation:

Gross density: 1450 kg/m

Configuration: As above

Thermal Conductivity: 0.47 W/mk

Dangerous substance: NPD


DECLARATION OF PERFORMANCE
No. 140MS7

1 Product type: 140MS7


2 Identification: 140MS7
3. Intended use: in walls, columns and partitions

4. Manufacturer
WDL Concrete Products Ltd
Stuart Quarry,
Penderyn, Aberdare CF44 9JY
Email: [email protected]
5. Authorised Representative: Not applicable
6. AVCP System 4
7. Harmonized standard: EN 771-3
8. ETA: Not relevant
9. Declared performance
Harmonized technical
specification
Essential characteristics Performance

Length 440 mm

Dimensions (1)
Width 140mm
Height 215 mm

Tolerance category D1

Shape and features NPD

Configuration (1)
Group according to
Group 1
EN 1996-1-1 (EC6)

Compressive strength(1) Mean compressive 7.3 N/mm


strength
Perpendicular to bed EN 771-3: 2013
Direction of load
faces
Unit category Category II

Dimensional stability (1) 0.5mm/m (measured value)

Bond strength (1) Shear bond strength 0.15N/mm2


(tabulated value)
Flexural bond strength NPD

Reaction to fire (2) A1


(Commission Decision
2000/605/EC)
Water absorption (3) NPD
Water vapour permeability (4) 5/15
(tabulated value)
Direct airborne sound Gross density 1450 kg/m3
insulation (5)

(in end conditions )/ [Density


and configuration] Configuration; dimensions
and tolerances See configuration

Thermal resistance/ or density and configuration (6) 0.38 10, dry, unit
(tabulated value)

Durability against freeze/thaw Not to be left exposed

Dangerous substances NPD

(1) for units intended to be used in elements subject to structural requirements


(2) for units intended to be used in elements subject to fire requirements
(3) for units intended to be used in damp proof courses or in external elements with an exposed face
(4) for units intended to be used in external elements
(5) for units to be used in elements subject to acoustic requirements
(6) for units intended to be used in elements subject to thermal insulation requirements

10. The performance of the product identified in 1 and 2 is in conformity with the declared
performance in 9.
This declaration of performance is issued under the sole responsibility of the manufacturer
identified in 4.

Signed on behalf of the manufacturer:

Name: Martin Lewis (Joint Managing Director)

Signature:

Valid From: Aberdare, 01.07.2013

You might also like