oc_kba_codes_en.fm Seite 1 Freitag, 4.

Mai 2007 12:08 12

OpenCom 100: Code-number Procedures

You can use the code-number procedures on standard, ISDN and SIP terminals as well as on
system telephones.

Dial out
Making internal calls (on automatic H * * Z (internal tel. no.)
seizure of external line) 1]
Deactivating Least Cost Routing H # # Z (dialling code, tel. no.)
(LCR) 1] 5]
VIP call 1] 5] H * # Z (internal tel. no.)
Calling the entrance intercom 1] 5] H * 1 0 1 (not with OpenCom X320)
Calling a “DoorLine” entrance H*102
intercom 1]
Door opener 1] H*11
1] 5]
Keypad dialling H * 1 2 Z (keypad code digits)
Announcement 1] H * 1 3 * Z (internal tel. no.) #
1] H * 1 3 1 * Z (device-ID) #
Intercom
Calling Line Identification H * 1 4 Z (tel. no.)
Restriction (CLIR) by call 1]
Baby call 5] on: H * 5 3 * (external access code, e.g. 0 )
Z (destination tel. no.) #
off: H # 5 3 #
Speed dialling 1] H * 7 Z (speed dialling no.)
alternatively: H * 7 * Z (speed dialling no.) #
Dialout for another terminal H * 5 1 * Z (device-ID:) *
Z (destination tel. no.) #
Dial in
Leaving a callback request on: G * 3 7 #
(a/b, DECT-GAP) alternatively: G 6 h
off: G # 3 7 #
Pick-up 1] H*0#G…
1] H * 0 * Z (internal tel. no.) # G …
Pick-up selective
Logging out of/into all log out: H * 3 1 #
hunt groups 5] log in: H # 3 1 #
Logging out of / into individual log out: H * 3 1 * Z (internal tel. no.) #
hunt groups 5] log in: H # 3 1 * Z (internal tel. no.) #

1
oc_kba_codes_en.fm Seite 2 Freitag, 4. Mai 2007 12:08 12

Connections
Parking / Unparking a call 5] park: G R * 1 6 (Park-Codes 0-9) h
unpark: H * 1 6 (Park-Codes 0-9)
Rejecting a waiting call G R 0 G … (a/b, DECT-GAP)
Disconnecting a call G R 1 G … (a/b, DECT-GAP)
Toggling / Accepting a waiting call / G R 2 G … (a/b, DECT-GAP)
Ending a three-party conference
Starting a three-party conference 5] G R 3 G … (a/b, DECT-GAP)
Connecting two external parties R # h … (a/b, DECT-GAP)
with each other 2]
All call forwardings off 5] H#2#
Deleting all call forwarding in the H * 1 8 4 Z (system PIN) #
exchange 5]
Call forwarding “immediately” on: H * 2 1 * (external access code, e.g. 0 )
for all (internal and external) calls 5] Z (destination tel. no.) #
off: H # 2 1 #
Call forwarding “immediately” on: H * 2 1 1 * (external access code, e.g. 0 )
for internal calls 5] Z (destination tel. no.) #
off: H # 2 1 1 #
Call forwarding “immediately” on: H * 2 1 2 * (external access code, e.g. 0 )
for external calls 5] Z (destination tel. no.) #
off: H # 2 1 2 #
Call forwarding “immediately” on: H * 2 1 3 * Z (MSN) *
for MSN 3] 5] Z (destination tel. no.) #
off: H # 2 1 3 * Z (MSN) #
Call forwarding “immediately” on: H * 2 1 4 * Z (user’s internal tel. no.) *
for other users 5] Z (destination tel. no.) #
off: H # 2 1 4 * Z (user’s internal tel. no.) #
Follow Me on: H * 2 2 * Z (source PIN) *
(on on the destination telephone / Z (source tel. no.) #
off on another telephone) 5] off: H # 2 2 * Z (source PIN) *
Z (source tel. no.) #
Call forwarding “after delay” on: H * 6 1 * (external access code, e.g. 0 )
for all (internal and external) calls 5] Z (destination tel. no.) #
off: H # 6 1 #
Call forwarding “after delay” on: H * 6 1 1 * (external access code, e.g. 0 )
for internal calls 5] Z (destination tel. no.) #
off: H # 6 1 1 #
Call forwarding “after delay” on: H * 6 1 2 * (external access code, e.g. 0 )
for external calls 5] Z (destination tel. no.) #
off: H # 6 1 2 #

2
oc_kba_codes_en.fm Seite 3 Freitag, 4. Mai 2007 12:08 12

Call forwarding “after delay” on: H * 6 1 3 * Z (MSN) *

for MSN 3] 5] Z (destination tel. no.) #
off: H # 6 1 3 * Z (MSN) #
Call forwarding “after delay” on: H * 6 1 4 * Z (user’s internal tel. no.) *
for other users 5] Z (destination tel. no.) #
off: H # 6 1 4 * Z (user’s internal tel. no.) #
Call forwarding “on busy” on: H * 6 7 * (external access code, e.g. 0 )
for all (internal and external) calls 5] Z (destination tel. no.) #
off: H # 6 7 #
Call forwarding “on busy” on: H * 6 7 1 * (external access code, e.g. 0 )
for internal calls 5] Z (destination tel. no.) #
off: H # 6 7 1 #
Call forwarding “on busy” on: H * 6 7 2 * (external access code, e.g. 0 )
for external calls 5] Z (destination tel. no.) #
off: H # 6 7 2 #
Call forwarding “on busy” on: H * 6 7 3 * Z (MSN) *
for MSN 3] 5] Z (destination tel. no.) #
off: H # 6 7 3 * Z (MSN) #
Call forwarding “on busy” on: H * 6 7 4 * Z (user’s internal tel. no.) *
for other users 5] Z (destination tel. no.) #
off: H # 6 7 4 * Z (user’s internal tel. no.) #
Forwarding entrance intercom calls on: H * 1 5 1 (for doorbell 1) * (external
(on an OpenCom 100) 4] 5] access code, e.g. 0 ) Z (destination tel. no.) #
off: H # 1 5 1 (for doorbell 1) #
Forwarding entrance intercom calls on: H * 1 5 5 (for doorbell 1) * (external
(on an OpenCom X320) 4] 5] access code, e.g. 0 ) Z (destination tel. no.) #
off: H # 1 5 5 (for doorbell 1) #
Protection
Telephone lock 5] on: H * 3 3 * Z (user PIN) #
off: H # 3 3 * Z (user PIN) #
Call protection for all on: H * 4 2 #
(internal and external) calls 5] off: H # 4 2 #
Call protection for internal calls on: H * 4 2 1 #
only 5] off: H # 4 2 1 #
Call protection for external calls on: H * 4 2 2 #
only 5] off: H # 4 2 2 #
Call waiting on/off on: H * 4 3 #
(= call waiting protection off/on) 5] off: H # 4 3 #
Remote service on: * 1 9 * Z (system PIN) #
off: # 1 9 #

3
oc_kba_codes_en.fm Seite 4 Freitag, 4. Mai 2007 12:08 12

Hotel
Room has been cleaned 5] *170
5]
Wake-up call on / off on: H * 5 5 * (time, e.g. 0 6 1 5 )
off: H * 5 5 #
Others
Activating automatic time control 5] H * 8 #
Manually setting a time group 5] H * 8 * Z (number of the time group, e.g. 1 ) #
5] H * 9 9 * Z (old user PIN) *
Changing the user PIN
Z (new user PIN) * Z (new user PIN) #
Configuring IP address 5] * 1 8 2 Z (system PIN)
* 111 * 222 * 333 * 444 #
Configuring network mask 5] * 1 8 3 Z (system PIN)
* 111 * 222 * 333 * 444 #
Restart * 1 8 5 Z (system PIN) #
6]
Show firmware version (revision) *186
Show own port 6] *187
Show system type 6] *188
Operate CSTA-application H * 1 7 * Z (code) #

1] Consultation Calls

You can also carry out this code-number procedure during consultation calls:
G R press the R key during the current call

2] Connecting Two External Parties with Each Other

If you connect two external parties whom you called, you will be charged for the cost of the
resultant call.

3]
MSN Call Forwarding
You can forward several MSNs together to an external telephone number. The individual MSNs
are separated using * . You do not need to enter the full MSNs - the last unique digits are all you
need, as this is sufficient to distinguish them from one another.

4]
Doorbell
Several doorbells can be configured in the OpenCom 100. You can forward these doorbells using
the appropriate code number procedure. The user guide for the standard terminals provides an
overview.

5] SIP-Terminal

This code-number procedure can not be performed an a SIP-terminal.

6] SystemTelephones

This code-number procedure is only to be performed on a system telephone.

4 Aastra DeTeWe GmbH As of May 2007 Subject to changes