Scribd
Upload
105 views

Welcome To FM Configuration Package V1.0 SP2: Readme File Contents

This document provides instructions for installing and using the FM Configuration Package V1.0 SP2 software. It includes a list of modules supported by the package and their order numbers. The reader is advised to read the document fully before installing in order to understand software and hardware requirements, installation instructions, and where to find additional documentation and product information.

Uploaded by

Johana Carolina Betancur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
105 views

Welcome To FM Configuration Package V1.0 SP2: Readme File Contents

This document provides instructions for installing and using the FM Configuration Package V1.0 SP2 software. It includes a list of modules supported by the package and their order numbers. The reader is advised to read the document fully before installing in order to understand software and hardware requirements, installation instructions, and where to find additional documentation and product information.

Uploaded by

Johana Carolina Betancur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 9

Welcome to FM Configuration Package V1.

0 SP2

This readme file contains important information on the installation and use of the configuration
packages on this CD. You should read this information before you install and operate the
configuration package.

Readme File Contents

1 Contents of the Consignment

2 Software Requirements

3 Hardware Requirements

4 User Documentation

5 Installing the Software

6 Important Notes

7 Product Information for FM Configuration Package

SIMATIC is a registered trademark of Siemens AG. Third parties using for their
own purposes any other names in this document which refer to trademarks might
infringe upon the rights of the trademark owners.
1 Contents of the Consignment
You received one of the following products with this consignment:

FM 350-1 / FM 450-1

Order number: 6ES7 350-1AH0x-0AE0

6ES7450-1AP0x-0AE0

FM 350-2

Order number: 6ES7 350-2AH0x-0AE0

FM 351 / FM 451

Order number: 6ES7351-1AH0x-0AE0

6ES7451-3AL0x-0AE0

FM 352 / FM 452

Order number: 6ES7352-1AH0x-0AE0

6ES7452-1AH0x-0AE0

FM 352-5

Order number: 6ES7 352-5AH0x-0AE0

6ES7 352-5AH1x-0AE0

FM 355 C / FM 355 S / FM 455 C / FM 455 S

Order number: 6ES7 355-0VH1x-0AE0

6ES7 355-1VH1x-0AE0

6ES7 455-0VS0x-0AE0

6ES7 455-1VS0x-0AE0

FM 355-2C / FM 355-2S

Order number: 6ES7 355-2CH0x-0AE0

6ES7 355-2SH0x-0AE0

FM 453

Order number: 6ES7 453-3AH0x-0AE0


The following items are included in this package:

1 Module

Installation CD
2 Software Requirements
In order to be able to work with the configuration software, you will require the following:

An installed version of STEP 7 Basis V5.3 SP2 or higher

STEP 7 Basis V5.4 SP3 is necessary for operation with Windows Vista

STEP 7 Basis V5.5 is necessary for operation with Windows 7 (32 Bit)

STEP 7 Basis V5.5 SP1 is necessary for operation with Windows 7 (64 Bit)

For additional software requirements please refer to the Product Information of STEP 7 and the
product information of the individual option package.
3 Hardware Requirements
To work with the FM Configuration Package CD, you need the following:

Max. 60 MByte of additional memory on your hard disk per option package.

For other hardware requirements, consult the Product Information Bulletin for STEP 7
and the product information of the individual option package.
4 User Documentation
You will find the most important details about working with the individual configuration interfaces in
the online help application.

The manuals and the Getting Started guide are in PDF format.

You must have Adobe Reader installed on your system in order to read or print these manuals.

The documentation on the respective modules is located in the Manuals folder.


5 Installing the Software

Important Note
The individual option packages will register in the Microsoft Windows system files.
You cannot move or rename STEP 7 files or folders using Microsoft Windows
utilities such as the Explorer or modify STEP 7 data in the Microsoft Windows
registry. The program may no longer run properly after such modifications.

The configuration software can only be installed once STEP 7 has been completely
installed.

Before starting the Setup program, close all applications (such as STEP 7, MS Word,
etc.).

Insert CD in the drive and start the Setup program in the Setup folder. The files are then
copied to the PC/programming device and the appropriate entries are made in the MS Windows
files. Important information on handling will be displayed during the Setup process.

The drive on which you install the software for the configuration is automatically
determined with the installed version of STEP 7.

In order to remove the program use the functions in the Control Panel > Add/Remove
Programs function. STEP 7 cannot be removed unless all the option packages have been
removed.
6 Important Notes
The Product Information is located in the respective option package.
7 Product Information for FM Configuration
Package
The following option packages are included on this CD:

Option package Version Used for module

FM 350-1/450-1 Counter V6.0 + SP2 FM 350-1 and FM 450-1


FM 350-2 Counter Function Module V6.0 + SP2 FM 350-2
FM 351/451 Abs V6.0 + SP2 FM 351 and FM 451
FM 352/452 Cam V6.0 + SP3 FM 352 and FM 452
FM 352-5 Programming Environment V1.2 + SP3 FM 352-5 (P / M switching)
FM 355/455 PID Control V6.1 + SP2 FM 355 C/S and FM 455 C/S
FM 355-2 Temperature Control V6.1 + SP2 FM 355-2 C/S
FM 453 incl. V3.3 + HF4 FM 453
FM353/354/453/ Technology Functions V2.1 + HF2

You might also like