SHEET NUMBER

1 Revision #:
SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

PRESENTATION
VIEWS
1910 E GRANDVIEW DR.

GRANDVIEW
RENDERING
FOR ILLUSTRATION ONLY

2016

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
NOTICE, DISCLAIMER AND COPYRIGHT OWNER: HOUSE FOR HOMES
GENERAL NOTES: TITLE
INDEX OF DRAWINGS
SHEET
This Drawing is owned and/or licensed by Chief Architect, Inc. and is solely for demonstrative and illustrative purposes as a
PROJECT: 1910 E. GRANDVIEW DR. PROJECT SUMMARY 1
way to help you more quickly learn and better understand the functional capabilities of the software program. You agree,
under the License Agreement, that you will not reproduce, distribute or use this Sample Drawing for any other purpose without
ADDRESS: COEUR D'ALENE, IDAHO SITE & DISTURBANCE PLAN 2
the prior written consent of Chief Architect, Inc..
ROCKERY WALL DETAIL 3
THIS PLAN SET, COMBINED WITH THE BUILDING CONTRACT, PROVIDES BUILDING DETAILS FOR THE RESIDENTIAL PROJECT. MAIN FLOOR PLAN 4

208.292.3400
THE CONTRACTOR SHALL VERIFY THAT SITE CONDITIONS ARE CONSISTENT WITH THESE PLANS BEFORE STARTING WORK. LEGAL: LOT 7, BLK 1 2ND FLOOR PLAN &
CHIEF ARCHITECT, INC. MAKES NO WARRANTY WHATSOEVER WITH REGARD TO ITS SAMPLE DRAWINGS SOLELY
WORK NOT SPECIFICALLY DETAILED SHALL BE CONSTRUCTED TO THE SAME QUALITY AS SIMILAR WORK THAT IS DETAILED. WOODLAND HEIGHTS SEVENTH ADDITION STAIR SECTION/DETAIL
FOR DEMONSTRATIVE AND ILLUSTRATIVE PURPOSES. CHIEF ARCHITECT, INC MAKES NO WARRANTY THAT THE 5
DIMENSIONS IN THESE SAMPLE DRAWINGS ARE ACCURATE AND FREE OF DISCREPANCIES. CHIEF ARCHITECT, ALL WORK SHALL BE DONE IN ACCORDANCE WITH INTERNATIONAL BUILDING CODES AND LOCAL CODES. CONTRACTOR FOUNDATION PLAN 6
INC MAKES NO WARRANTY THAT THESE SAMPLE DRAWINGS COMPLY WITH ANY BUILDING CODES. THESE SHALL BE RESPONSIBLE AND BEAR ANY FINES OR PENALTIES FOR CODE, ORDINANCE, REGULATION OR BUILDING FIRE DISTRICT KOOTENAI FIRE & RESCUE FRONT ELEVATIONS 7
SAMPLE DRAWINGS ARE PROVIDED TO YOU "AS IS," AND CHIEF ARCHITECT, INC. AND THE LICENSORS OF SECTIONS & DETAILS 8
PROCESS VIOLATIONS. INSURANCES SHALL BE IN FORCE THROUGHOUT THE DURATION OF THE BUILDING PROJECT. WATER: NORTH KOOTENAI WATER
THESE SAMPLE DRAWINGS DISCLAIM ANY AND ALL WARRANTIES WITH RESPECT TO THESE SAMPLE DRAWINGS, SECTIONS & DETAILS 9
SEWER: HAYDEN LAKE RECREATIONAL SEWER
WHETHER EXPRESS OR IMPLIED OR ARISING BY CUSTOM OR TRADE USAGE, AND, SPECIFICALLY, MAKE NO SHEAR WALL LOCATIONS 10
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. WRITTEN DIMENSIONS AND SPECIFIC NOTES SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND GENERAL NOTES. WALL FRAMING 11
THE ENGINEER/DESIGNER SHALL BE CONSULTED FOR CLARIFICATION IF SITE CONDITIONS ARE ENCOUNTERED THAT ARE STORM WATER PERMIT: _____ FLOOR FRAMING 12
UNDER NO CIRCUMSTANCES WILL CHIEF ARCHITECT, INC, ITS RESELLERS, ITS DISTRIBUTORS OR THE ROOF PLAN 13
DIFFERENT THAN SHOWN, IF DISCREPANCIES ARE FOUND IN THE PLANS OR NOTES, OR IF A QUESTION ARISES OVER THE BLDG PERMIT: _____
LICENSORS OF THE SAMPLE DRAWINGS BE LIABLE FOR ANY DAMAGES, WHETHER ARISING FROM TORT OR DOOR & WINDOW SCHEDULE 14
CONTRACT, INCLUDING LOSS OF DATA, LOST PROFITS, COST OF COVER, OR OTHER SPECIAL, INCIDENTAL, INTENT OF THE PLANS OR NOTES. CONTRACTOR SHALL VERIFY AND IS RESPONSIBLE FOR ALL DIMENSIONS (INCLUDING INTERIOR SECTIONS &
CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT OF THE USE OF THESE SAMPLE DRAWINGS. PLEASE ROUGH OPENINGS). DESIGNER: CHIEF ARCHITECT ELEVATIONS 15
ELECTRICAL PLAN 16
REFER TO YOUR END USER SOFTWARE LICENSE AGREEMENT FOR MORE INFORMATION ABOUT THE TERMS ALL TRADES SHALL MAINTAIN A CLEAN WORK SITE AT THE END OF EACH WORK DAY. DESIGN CONSULTANT: H2A ARCHITECTS
PLUMBING &
AND CONDITIONS PURSUANT TO THESE BUILDER: YOUNG CONSTRUCTION
HVAC PLAN 17
PLEASE SEE ADDITIONAL NOTES CALLED OUT ON OTHER SHEETS. SITE DISTURBANCE: CLEARWATER SUMMIT MSTR BATH PLAN & ELEVATIONS 18
KITCHEN PLAN & ELEVATIONS 19
ENGINEERING: BC ENGINEERS
PROJECT STATISTICS: PROJECT NARRATIVE

SHEET NUMBER
LOT SIZE: 21,170 SF (.486 ACRE) THE PROPOSED SITE LOCATION IS 1910 E Grandview Drive- COEUR D'ALENE, ID. - KOOTENAI COUNTY, IDAHO. Lot 7, Block 1 Woodland

2
130 131 132 133
118.65 ft 136 Heights 7th Addition. THE PROPOSED PROJECT INCLUDES A SINGLE-FAMILY RESIDENCE, BOULDER RETAINING WALLS, PAVED

Revision #:
ANTICIPATED DISTURBED AREA: 6,995 SF 135
129 DRIVEWAY, AND OTHER LANDSCAPE FEATURES. BOULDER RETAINING WALLS, ON PLAN, THAT EXCEED 4' HEIGHT SHALL BE
BLDG. ENVELOPE: 3,970 SF
ROOF: 5,475 SF LOT 7 N28 29' 35"W EXISTING
ENGINEERED. STORM WATER RUNOFF FROM DRIVEWAY SHALL BE DIRECTED TO THE EXISTING ROADSIDE SWALE/ CULVERT VIA
THE PROPOSED FRENCH DRAIN SYSTEM ADJACENT TO THE EDGE OF THE DRIVEWAY. STORM WATER RUNOFF FROM HOUSE
FRONT/REAR HEIGHT: 25.8' BLOCK 18 134 FENCE
136
SHALL BE DISPERSED WITHIN ADJACENT LANDSCAPE AREAS. ALL GRADES SHALL HAVE A POSITIVE DRAINAGE AWAY FROM

LIVABLE SF: 3,587 22" DIA UNDISTURBED NATIVE FOUNDATION. COBBLE ROCKERY AT DOWNSPOUTS AND/ OR AREAS WHERE THERE IS SHEET FLOW OFF ROOF SHALL BE
128 INSTALLED TO CONTROL EROSION. A SEDIMENT CONTROL SILT FENCE SHALL BE INSTALLED AND INSPECTED PER LOCATION ON
VEGETATION

25'
MAIN: 3,000 PLAN PRIOR TO DISTURBANCE OF THE SITE. ALL DISTURBED AREAS SHALL REVEGETATED WITH ORNAMENTAL PLANTS, NATIVE

SCALE @ 24" X 36"

135
SECOND: 587 PLANTS, LAWN, AND/ OR DRYLAND SEED MIX.

DATE: 2.20.2017

DRAWN BY: S.H.

GARAGE: 862 25' SETBACK 18" DIA / BROKEN
ON BACK
134
127
SEDIMENT CONTROL MAINTENANCE & INSPECTIONS
SITE PLAN NOTES 10' 133
THE CONTRACTOR SHALL PROVIDE TEMPORARY SEDIMENT CONTROL SILT FENCE AS SHOWN ON PLAN TO ENSURE SEDIMENT-
10' SETBACK
SOIL: *1,500 PSF ALLOWABLE (ASSUMED) TO BE AT LADEN WATER DOES NOT LEAVE THE PROPERTY BOUNDARIES. THE CONTRACTOR FOR THE PROJECT SHALL BE RESPONSIBLE
ON SIDES 18" DIA / 67'

69'-11"
126 130 FOR THE MAINTENANCE OF THE SILT FENCE TO ASSURE CONTINUED PERFORMANCE OF IT'S INTENDED USE. AT MINIMUM TWO
TIME OF EXCAVATION. 132
129 INSPECTIONS BY THE DESIGN PROFESSIONAL ARE REQUIRED FOR THE PROPOSED PROPERTY. 1) AFTER SEDIMENT CONTROL SILT

SITE & DISTURBANCE

FROST DEPTH: *2'-0" 24" DIA / 69' 131 FENCE HAS BEEN INSTALLED, PRIOR TO GROUND DISTURBANCE, AND; 2) AFTER THE PROJECT HAS BEEN COMPLETED, INCLUDING
128
SEISMIC ZONE: C 12" DIA 130
T
RE-VEGETATION AND/ OR PROPOSED LANDSCAPING. FOR SITES WHICH ARE ACTIVEOSDURING THE WINTER ST MONTHS, TWO
125 127 P 10' MAX. PO
WIND: 76 MPH (90 MPH 3 SEC GUST) 129 ADDITIONAL INSPECTIONS ARE REQUIRED. 1) PRE WINTER (OCT OR NOV) AND 2) POST WINTER (FEB OR MARCH) TO ENSURE
EXISTING DISTURBED AREAS SHALL
126 128 EROSION AND SEDIMENT CONTROL MEASURES ARE INTACT AND FUNCTIONING PROPERLY. THE PERMITTE'S DESIGN
EXPOSURE C FENCE 127
125 PROFESSIONAL SHALL PERFORM THE INSPECTIONS AND SUBMIT INSPECTION REPORTS TO KOOTENAI COUNTY BUILDING &
BE REVEGETATED W/ GRASS 126
124 PLANNING. ALL ACTIVITIES GOVERNED BY THESE REGULATIONS SHALL BE SUBJECT TO INSPECTIONS BY THE COUNTY. AN
SITE SURVEY TO VERIFY PIN LOCATIONS AND AND/OR OTHER PLANT 125
APPROVED SET OF PLANS MUST BE AVAILABLE FOR REVIEW THROUGHOUT THE DURATIONDOWNHILLOFVIEW
THE PROJECT. IT SHALL BE THE
124
MATERIAL STAIR 123 124
PERMITTE'S RESPONSIBILITY TO KEEP THE COUNTY NOTIFIED OF THE PROGRESS OF THE PROJECT AND SUBMIT ALL REQUIRED
HOME LOCATION PRIOR TO EXCAVATION. 123
CONTRACTOR TO VERIFY LOCATION OF ALL O W INSPECTIONS.

EXIS
2' T 12

PLAN
EXISTING UTILITIES. ALL FINISH GRADES SHALL BE 12 2' T H
123 OW 115.5' T OW 122
ON E
ST SID CL
OT

TING
SMOOTH AND UNIFORM 6 'B OW 116
PO HILL
N FIL T ER
L
11 LAWN ' BO D OW
UP
HIL
FL O W N DL
INE
111.5' BOW OU

RET
MARKED TREES SHALL BE REMOVED PRIOR TO
W GR SIDE SECTION
18" DIA / 34'

AI
122
SITE WORK. 115 STAIR BURY BOTTOM EDGE

NING
N49 5
121 STAKE DRIVEN OF CLOTH 6"

S61 25' 10"W

MINIMUM OF 1'

154.67
CALL BEFORE YOU DIG: 800.428.4950 LAWN

WAL
155.83 ft
PROPOSED
WATER
SILT FENCE
SILT FENCE DETAIL
NOT TO SCALE
DETAIL

L
NOT TO SCALE

9' 11"E
FEATURE 122
PATIO 112'

ft
2-4" ROUND
14'-9" 112 DRAIN ROCK
120
121
FL O W
119

119 115 24" DIA

10
"
DISTURBED AREAS SHALL
BE REVEGETATED W/ GRASS 19'-2" PROPOSED BOULDER

1910 E GRANDVIEW DR.

RETAINING WALL, TYP.
LEGEND AND/OR OTHER PLANT PROPOSED RESIDENCE LOCATION

GRANDVIEW
118 12" DIA 118 4" PERFORATED
11
OW

MATERIAL DRAINAGE PIPE

5.5 SOIL
FND. 1/2" IRON ROD DISTURBED AREAS SHALL 'T 117 WITH FABRIC SOCK
BO W
.5' T

117 11 OW
113 GARAGE BE REVEGETATED W/ 2'
T TELEPHONE/CABLE POA BO FRENCH
FRENCH DRAIN DETAILDETAIL
DRAIN
115

110 GRASS AND/OR OTHER W 116

113'

NOT TO SCALE
116
PLANT MATERIAL 12" DIA 115 NOT TO SCALE
G NATURAL GAS LINE PORCH 112'

S/W
115

C/W
114
P UNDERGROUND POWER LINE ASPHALT DRIVEWAY
/L
113 40' MAXIMUM
T
G

OW
P

400 AMP SERVICE 114 T 112 FRONT SETBACK

' TRENCH DRAIN
1 13 PATIO 112' 111
W 1" MAIN WATER LINE OW FL O W
/L

B W A TE R
G

0
0' C/W
S/W
P

113 11 ASPHALT 110

11 LAWN 110
S SEWER WASTE LINE 3.8% SLOPE
109
112
25' MINIMUM
/L

C/W
G

T
P

DRAINAGE TO STREET FRONT SETBACK

D 111
P/L P/L C/W
P/L

G G 108
S/W

C/W
110 T T
110 PERFORATED ADS DRAIN
27'-9"

EXISTING ELEVATION CONTOUR LINE 109 C/W 107

30'-3"

PIPE W/ SOCK SHALL BE

9
108
10
106 2016
110 P INSTALLED 6" BELOW EDGE
C/W
PROPOSED BOULDER

8
PROPOSED ELEVATION CONTOUR LINE 107

10
105
OF DRIVEWAY & COVERED W/ C/W RETAINING WALL, TYP.

106
107
106 12% SLOPE
G 104
G

2-4" DRAINROCK S / W C/W NDS STAKE

105
105
BOULDER RETAINING WALL 103
104 TX

4
C/W
S/W COMPACTED CRUSHED

10
ASPHALT 109 102
103
W

3
X C/W

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

10
GRAVEL BASE

chiefarchitect.com
DIRECTION OF WATER FLOW 102
X
S/W 101
101
S/W X 1 02 100
NATIVE VEGETATION TO REMAIN
100
99
X r=470 ft X 10" CULVERT TRENCH
TRENCH DRAINDRAIN
DETAIL DETAIL
S/W
D/ P NOT TO SCALE
NOT TO SCALE
D
12'-9"

150 ft
12'-11"

D/ P 99.1
4" PERFORATED DRAIN PIPE/ FRENCH D/ P SILT FENCE
D/ P
PLANTING BED S/W
D/ P
D/ P

SEE DETAIL D/ P
DRAIN - SEE DETAIL. 99
D/ P
D/ P D/ P D/ P D/ P D/ P D/ P
D/ P
D/ P
S 2% SLOPE 100.68
4" SOLID DRAIN PIPE EASEMENT 6" MIN. DEPTH
TRENCH DRAIN 2"-4" CRUSHED
DRY LAND GRASS/ NATIVE COARSE ROCK
EDGE OF ASPHALT
VEGETATED AREAS TO REMAIN
LOWER WALL:

208.292.3400
ALL DRIVEWAY STORMWATER
RIP RAP DISSIPATION- 18"LENGTH X BOW 99, TOW 104.5 PROPOSED BOULDER
RUN-OFF SHALL BE DIRECTED

10'

20'
18"WIDTH X 6" DEPTH OF 3-6" SIZE ROCK AT UPPER WALL: RETAINING WALL, TYP.
TO EXISTING STORMWATER
BOW 104.5, TOW 109.5
INFILTRATION BASIN OVERFLOW LOCATIONS CULVERT INLET

SEDIMENT CONTROL SILT FENCE

MH
TOW RIM OF INFILTRATION BASIN GRANDVIEW DR.
CTL #100 50D NAIL 30'
BOW BOTTOM OF INFILTRATION BASIN EL=100.00 (ASSUMED)

THE ENTRANCE SHALL BE MAINTAINED IN A CONDITION WHICH WILL PREVENT TRACKING

EXISTING PINE TREES ONTO PUBLIC RIGHT-OF-WAY. THIS MAY REQUIRE PERIODIC TOP DRESSING WITH
ADDITIONAL ROCK AS NEEDED. IF ANY SEDIMENT AND/ OR ROCK IS TRACKED ONTO
N

PUBLIC RIGHT-OF-WAY IT MUST BE REMOVED IMMEDIATELY.

PINE TREES FOR REMOVAL
SITE & DISTURBANCE PLAN STABILIZED CONSTRUCTION ENTRANCE
NOT TO SCALE
1"=10'
STABILIZED CONSTRUCTION ENTRANCE
NOT TO SCALE
 129' CORNER LOT
ELEVATION

ROCKERY GENERAL NOTES:

SHEET NUMBER

3 Revision #:
1. CODE: 2012 BC
2. CONTRACTOR TO VERIFY AND CONFIRM ALL DIMENSIONS AND CONDITIONS AND NOTIFY
122'
ENGINEER OF ANY DISCREPANCIES PRIOR TO START OF WORK.
3. THE CONTRACTOR, SHALL BE RESPONSIBLE FOR STRUCTURAL STABILITY DURING
CONSTRUCTION, INCLUDING STABILITY OF ALL TEMPORARY CUTS. THE STRUCTURE 116'
SHOWN ON THE DRAWINGS HAS BEEN DESIGNED FOR STABILITY UNDER THE FINAL DRIVEWAY PAD

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

CONFIGURATION ONLY. 113'
STONE RETAINING WALL
4. BASE, FACING AND CAP ROCKS SHALL CONSIST OF INTACT ROCKS WITHOUT FRACTURES,
2:1 MAX SLOPE 109'
FOLIATION OR OTHER PLANES OF WEAKNESS, AND SHALL HAVE A MINIMUM DRY DENSITY TERRAIN CUT LINE
T4
OF 156 POUNDS PER CUBIC FOOT. ROCKS AND ARE TO BE ANGULAR; THAT IS ROUGHLY 3
DRAINAGE
RECTANGULAR, TABULAR OR CUBIC IN SHAPE.
5. ROCKS TO BE PLACED INDIVIDUALLY BY EQUIPMENT SUITABLE FOR LIFTING, 99.4' STREET ELEVATION T3
MANIPULATING, AND PLACING ROCKS OF THE SIZE AND SHAPE SPECIFIED. ENSURE THAT 3
99'
EACH ROCK IS FIRMLY SET AND SUPPORTED BY UNDERLYING MATERIALS AND ADJACENT
ROCKS. REPOSITION OR REPLACE LOOSE ROCKS. 12'-11" A. 8'-3" A. 22' APPROX. 10' A. 37'-8" APPROX. 10' A. 12' A.
6. A MAXIMUM TOLERANCE OF 6" MAY BE APPLIED TOWARD THE TOTAL ROCK BASE WIDTH. PROPERTY LINE
WHEN ROCK BASE WIDTH EXCEEDS 5-6", TWO APPROXIMATELY EQUAL SIZE ROCKS MAY BE
S. TERRAIN SECTION

ROCKERY WALL
STACKED AS ONE COURSE, PROVIDED THAT THESE ROCKS ARE IN CONTACT AT TWO T2 1/8" = 1'
POINTS OR MORE.
7. WHEN THE WIDTH OF THE BASE ROCK EXCEEDS 5'-6", TWO APPARENTLY EQUAL SIZED
ROCKS MAY BE SUBSTITUTED TO FORM ONE COURSE, WITH ONE AT THE FACE AND ONE
S. TERRAIN SECTION

DETAIL
BEHIND. THIS SUBSTITUTION SHALL BE MADE ONLY AT ONE OF ANY TWO ADJACENT STONE RETAINING WALL
ROCKS. SLOPING BACK TO
137' CORNER LOT
8. PLACE BASE, FACING AND CAP ROCKS SO THAT THEIR HEIGHT DIMENSION IS NOT CENTER OF LOT
ELEVATION
GREATER THAN THEIR WIDTH. THE LONGEST DIMENSION SHALL BE PERPENDICULAR, TO
10' APPROX.
THE FACE OF THE ROCKERY.
9. SURROUND PERFORATED PIPE ON ALL SIDES BY AT LEAST 4" OF GRANULAR DRAIN ROCK
10. DISCHARGE OUTLET PIPES TO A PROTECTED OUTLET OR OTHER PERMANENT DRAINAGE 122'
STRUCTURE AT LOW POINTS IN THE ROCKERY AND AT I 00 FT MAX. SPACING. DRAIN
OUTLETS SHOULD NOT EMPTY INTO STORM DRAINS THAT ARE DESIGNED TO BACK-UP
DURING HEAVY FLOWS 116' 111.5' PAD ELEVATION
11. CONSTRUCT ROCKERIES PARALLEL TO CURB GRADE UNLESS OTHERWISE NOTED.
12. GROUND SNOW LOAD: 71 PSF 111.5'
VEHICLE SURCHARGE: 5OPSF
WIND UPLIFT: 5 PSF
WIND SPEED= 90 MPH EXP C MAX SLOPE 2:1
TERRAIN CUT LINE
SEIS. ZONE= C
SOIL BEARING= 1500 PSF
100.7' ROAD

1910 E GRANDVIEW DR.

N. TERRAIN SECTION ELEVATION

GRANDVIEW
T2 1/8" = 1'

GRANULAR ROCK BACK DRAIN GRADATION RETAINING WALL SCHEDULE T2

3
T1
3
U.S. STANDARD SIEVE SIZE PERCENT PASSING BY DRY WEIGHT H B C D N. TERRAIN SECTION 118.65 ft
N28 29' 35"W
6 INCH 100 6'-0" 2'-9" I '-3" 1'-0"
3 INCH 0.0 - 25 8'-0" 3'-6" I '-6" 1'-0"
3/4 INCH 0.0 - 15 9'-0" 4'-0" I '-9" 1'-0"
No. 4 0.0 - 5.0
No. 200 0.0 - 2.0

'C'
1'-6"

GRADE

CHINKING ROCK, TYP. 2016

TYP I-B NON-WOVEN ROCKS ABOVE ARE NOT TO

N49 5
S61 25' 10"W

154.67
CAP ROCK GEO-TEXTILE BETWEEN BEAR ON CHINKING ROCKS

155.83 ft

9' 11"E
1 RETAINED SOIL AND
1

ft

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

ARRANGE ROCKS

chiefarchitect.com
DRAIN ROCK, TYP. MIN (2) CONTACT
UNIFORMLY LARGEST 4
1.5 MIN. POINTS EA. ROCK TO
1V:1.5H MAX. INCLINATION
TO SMALLEST, BOTTOM GRANULAR ROCK ROCKS BELOW, TYP.
FOR TRANSITION IN
TO TOP, TYP. BACKDRAIN WALL HEIGHT
6'

'H'
VERTICAL SEAMS SHALL
BASE ROCK BACK FACE OF ROCKERY 12" DEEP CLEAN DRAINING EXTEND NO MORE THAN
5% MIN. SLOPE TYP. TO BE APPROX. VERT. CRUSHED COMPACTED (2) ROCKS IN HEIGHT
GRAVEL BED BELOW ROCKS
4" PERF. DRAIN PIPE
2' MIN. WRAPPED IN FILTER VERTICAL STEPS AS NECESSARY

208.292.3400
2 FABRIC w/ CLEAN DRAIN TYPE I-B NON-WOVEN GRADE
1 MAX.

1' MIN.
ROCK
8"

'D' GEO-TEXTILE BELOW ROCKS TYP.

E 10 MIN.
AD 1
GR
1' MIN.

BOTTOM OF FOUNDATION
r=470 ft
ROCK SHALL BE INCLINED
150 ft
1' MIN. NO STEEPER THAN 1V:10H
'B'
3'

T3 ROCKERY SCHEDULE T4 ROCKERY ELEVATION T2

3
T1
3
GRANDVIEW DR.
3 3/4" - 1' 3 3/4"=1'
SITE PLAN
1"=20'
 S4

SHEET NUMBER
9

4
40' E5

Revision #:
14'-11" 3'-11" 9' 12'-2" 7
1'-10" 2'-4" 1'-11"
5' 4'-1" 6'-11" 4'-4" 4'-6" 4'-1" 5'
W1-12 W1-13 W1-15 W1-16 W1-12

2'-5"
1'-9"
CLOSET

3'-8"
14'-2"
19 SQ FT SHOWER

5'-1 1/2"
17 SQ FT

SCALE @ 24" X 36"

3'-1"
3'

11'-2"

DATE: 2.20.2017

DRAWN BY: S.H.

D1-05 W1-17

10'-10 1/2"
D1-07

9'-9"
11'-2"

3'-11"
S7 S5 S6
W1-07
11 9 8
7'-5 1/2" BATH

14'-2"
50 SQ FT 62'

5'-8"
4'-4"

3'
BEDROOM 3 CLOSET
D1-07 D1-07
18' 20' 24'

3'-7"
163 SQ FT 3'-3" 4 1/2" 3'-3"
31 SQ FT 4 1/2"

6"
5'-6 1/2" 2'-11" 2'-5"
3'-3 1/2" BEDROOM 2 SUITE 3'-7" 3'-7" 3'-7" 5' 7'-7" 3'-5" 8'
157 SQ FT

10 1/4"
1'-11" 1'-2"
D1-04 W1-05 W1-05 W1-05
W1-04

4'
D1-07 W1-04 W1-04

4'-5"
PATIO 1'-11" 2'-0 1/2"

6"
6'-10 1/2" 5'-5"

3'
D1-07
1'
W1-06 1'-10" 1'-9" 2'-6 1/2" 2'-6"
S3

MAIN FLOOR PLAN

W1-16
3'-1" 4'-7" 9'-6" 2'-7" 4'-1" 2'-8" 3'-11"

3'
J&J BATH 8 8'-8 1/2" 11'-3"

6" 6"
7'-8"

6'-9"
D1-09
82 SQ FT
30'

LAUNDRY D1-07
W1-18
STORAGE

6"
47 SQ FT
4'-7"

2'
D1-07
23 SQ FT

3'
2'-5"
D1-07
W1-16
4'-1" 9 1/2" 3' 5'-6" 3' S5 S5 W1-15 W1-09 W1-08 W1-08
1'-5"

2'-2 1/4"
D1-07 6" 8 8

4'-1"

GAS FP
D1-04
2'-1"
KITCHEN

61120PT
5'-1"
2' 13'-5 1/2"
3'-7"

BEDROOM 4

6'
10'-6 1/2"
163 SQ FT

8'-7"
D1-04

4'-3 3/4"

6'-1"
Half Wall 42"H

CLOSET1'-9"
POWDER w/ Glass on Top

11'-1"
10'-10 1/2"

UP CLOSET

12'
4"
S1 34 SQ FT 93 SQ FT
3'-11"
11'-2"

5
SHOWER MASTER BATH

2'-9"
W1-07

11 1/2"
5'-2"
D1-10 D1-07 44 SQ FT 139 SQ FT
OPEN CEILING

4'-7 1/2"
4'-1 5/16" 7'-3 3/16" 4'-10" 2'-10" 3' LIVING

3'
D1-07

4'-1"
11 1/2" 5'-2" 7'-3 1/2" 10'-8"

6"
3'-8"

MUD AREA

4'-8"
14'-2" 9' CEILING
W1-07

3'-9"
W1-11 D1-13 D1-13
PANTRY
1' 10'-10" 3'-1" 19'-2" 3' 2'-0 1/2" 2'-0 1/2"
3'-1" D1-04 3'-11"
1'-11"
4'-6"

UP

34'
6' 9' CEILING 8'
CRAWL SPACE 1'-6"

4'-1"

1' 1' 1'-11"

12' CEILING

6'-8"
E4 ACCESS UNDER FIRE BARRIER W1-10
E6

10'-8 1/2"
9" 6"

31 SQ FT
2'-2" 5 1/2"

HVAC
7 STAIRWAY 3'-8 1/4" 8'-2" 3'-8 1/4" 2'-9" 9' CEILING
5'-2" 3' 4'-7 1/2" 7
D1-14
8080 D1-11 D1-07
27" X 36"
ENTRY

CLOSET

4'-10 1/2"
VAULTED CEILING 5:12

1910 E GRANDVIEW DR.

7'-11"

3'-1"

GRANDVIEW
D1-07
W1-19 W1-03
TREY CEILING 8:12
12' CEILING DORMER OPENING

10'-10 1/2"

22'
W1-01
10' CEILING
D1-01

25'-6 1/2"
27'-6 1/2"

14'-10 1/2"
GARAGE

6'-2"
4'-5 1/2" 11'-1" 4'-5 1/2" OFFICE

15'-4"
862 SQ FT
167 SQ FT
28'

6'
PORCH 15'-6 1/2"
VAULTED CEILING 3:12
MASTER BDRM
9'-6"

D1-02
12' @ BOTTOM

3'-1"
251 SQ FT D1-09

10'-1"
S7 2'-11 1/2" 2'-11 1/2"
17'-1"

14'-10"
8

2'
4'
W1-02
PATIO
3'-1"

D1-12 12'-1"
FLOOR PLAN NOTES: 20' 16'
2'-11 1/2"
18'
2'-11 1/2"
2016
1. ALL EXTERIOR DIMENSIONS ARE TO D1-16 54'
3'

THE FRAMING OR MAIN LAYER. S7 S5 S6

2'

DIMENSIONS TO OPENINGS ARE TO D1-15 11 9 8 LIVING AREA

THE FRAMING, ROUGH OPENING. 3000 SQ FT

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
2' 9'-2" 2' 18'-2"
10" 1'-10"
2. CONTRACTOR SHALL VERIFY ALL 13'-2" 20'-10"
DIMENSIONS AND IS RESPONSIBLE FOR 34'
ALL DIMENSIONS (INCLUDING ROUGH
S3 S4 E1
OPENINGS). 8 9 7

WALL LEGEND
FLOOR PLAN - MAIN FLOOR

208.292.3400
ROOM DIVIDER / RAILING WALL
1/4"=1'
4" INTERIOR WALL

6" INTERIOR WALL

3/8" GLASS SHOWER, TEMPERED

6" EXTERIOR WALL, LAP SIDING

6" EXTERIOR WALL BOARD & BATTEN SIDING

6" EXTERIOR WALL, SHAKE SIDING

6" OR 8 CONCRETE STEM WALL & 4" FURRED WALL

FOUNDATION PONY WALL

6" OR 8" CONCRETE STEM WALL

OVERVIEW RENDERING
FOR ILLUSTRATION ONLY NO SCALE
 S3
BUILDING PERFORMANCE: 8

SHEET NUMBER

5
1. HEAT LOSS CALCULATIONS SHALL COMPLY WITH REScheck AND/OR

Revision #:
REQUIREMENTS OF LOCAL CODES.
2. PORCHES, DECKS, BALCONIES, FOUNDATION AND GARAGE AREAS NOT
34'
INCLUDED IN LIVING AREA.
3. ALL EXHAUST FANS TO BE VENTED DIRECTLY TO THE EXTERIOR. ALL 10'-8 1/2" 10' 13'-3 1/2"
PENETRATIONS OF THE BUILDING ENVELOPE SHALL BE SEALED WITH CAULK

SCALE @ 24" X 36"

OR FOAM.

DATE: 2.20.2017

DRAWN BY: S.H.

3. PROVIDE CRAWLSPACE VENTING TO MEET LOCAL CODE REQUIREMENTS
INSULATE ALL ACCESS DOORS/ HATCHES TO CRAWL SPACES AND ATTICS TO

9'

9'
THE EQUIVALENT RATING OF THE WALL, FLOOR OR CEILING THROUGH
WHICH THEY PENETRATE, UNO.
4. MINIMUM INSULATION:
OPEN TO
ATTICR-50
BELOW
DN
WALLS R-21

STAIR SECTION/DETAIL
FLOORS R-38 8' CEILING

2ND FLOOR PLAN &

7'-2"
25'
TREY CEILING 8:12

27'
FAMILY 9'-6" CEILING

16'
3'

18'
W2-01

7'-1 3/16"
UNDER STAIR

4"
ACCESS FROM GARAGE

3'
W2-01

2'-6"
D1-03

2'
W2-01 W2-01 W2-01 W2-01

5/8" TYPE 'X' GYPSUM

6 13/16"
1'-6" 4" 4"
11" FINISHED 10' 3' 3' 3' 3' 3' 3'
1'-2 1/2" 2'-7 1/2"

8'-5 1/2"
SUB FLOOR FLOOR 12'-8 1/2" 21'-3 1/2"

10'-5 1/2"
BALCONY
STAIR SECTION

1910 E GRANDVIEW DR.

INSPECTION NOTES: S1

GRANDVIEW
1/2" = 1'
1. PROVIDE SPECIAL INSPECTION, SPECIAL TESTING, REPORTING
AND COMPLIANCE PROCEDURES ACCORDING TO THE LOCAL 34'
BUILDING CODE.
STAIR NOTES: LIVING AREA
2. SPECIAL INSPECTOR QUALIFICATIONS: DEMONSTRATE 587 SQ FT
COMPETENCE, TO THE SATISFACTION OF THE BUILDING OFFICIAL, 1. STAIRWAYS SHALL HAVE A MIN. WIDTH OF 34". HAND RAILS MAY ENCROACH A MAX. OF 3 1/2" INTO THE S3 S4
FOR INSPECTION OF THE PARTICULAR TYPE OF CONSTRUCTION REQUIRED WIDTH. 8 9 FLOOR PLAN - FLOOR 2
OR OPERATION IN QUESTION. PRIOR TO THE BEGINNING OF 2. TREADS SHALL HAVE A MIN. WIDTH OF 10". STAIR TREADS MUST BE UNIFORM AND CAN NOT VARY FROM THE 1/4"=1'
CONSTRUCTION, REVIEW THE SPECIAL INSPECTION LARGEST TO THE SMALLEST BY MORE THAN 3/8".
REQUIREMENTS WITH THE ARCHITECT, ENGINEER, BUILDING 3. STAIRWAYS SHALL HAVE MIN. 6'-8" OF HEADROOM AT THE NOSE OF THE STAIR.
OFFICIAL, GENERAL CONTRACTOR AND SPECIAL INSPECTORS. 4. ENCLOSED USABLE SPACE UNDER INTERIOR STAIRS SHALL BE PROTECTED ON THE ENCLOSED FACE WITH 5/8"
DUTIES OF THE SPECIAL INSPECTOR INCLUDE, BUT ARE NOT TYPE "X" GYPSUM WALL BOARD.
LIMITED TO: 5. STAIRWAYS SHALL HAVE AT LEAST ONE HANDRAIL LOCATED 36" ABOVE THE NOSING OF TREADS AND
A. OBSERVE THE WORK FOR CONFORMANCE WITH THE LANDINGS. THE HAND GRIP PORTION OF HANDRAILS SHALL NOT BE LESS THAN 1-1/2" OR GREATER THAN 2" IN
APPROVED PERMIT DRAWINGS AND SPECIFICATIONS. BRING CROSS-SECTIONAL DIMENSION.
DISCREPANCIES TO THE IMMEDIATE ATTENTION OF THE 6. HANDRAILS SHALL BE CONTINUOUS THE FULL LENGTH OF THE STAIRS. THE ENDS OF HANDRAILS SHALL 2016
CONTRACTOR FOR BUILDING OFFICIAL. RETURN TO WALL OR TERMINATE INTO A NEWEL POST OR SAFETY TERMINAL.
B. FURNISH INSPECTION REPORTS FOR EACH INSPECTION TO 7. STAIRWAYS HAVING LESS THAN 2 RISERS DO NOT REQUIRE A HAND RAIL.
THE BUILDING OFFICIAL, ARCHITECT, ENGINEER, GENERAL 8. GUARDRAILS SHALL BE PROVIDED FOR AT PORCHES, DECKS, BALCONIES, STAIRWAYS AND LANDINGS WHERE

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

CONTRACTOR AND OWNER IN A TIMELY MANNER.

chiefarchitect.com
THE ADJACENT SURFACE IS GREATER THAN 24" BELOW AND SHALL HAVE A 34" MIN. HEIGHT
C. SUBMIT A FINAL REPORT STATING WHETHER THE WORK 9. RAILING AND GUARDRAIL BALUSTER SPACING SHALL BE NO GREATER THAN 4".
REQUIRING SPECIAL INSPECTION WAS INSPECTED, AND WHETHER 10. THE TRIANGULAR OPENINGS FORMED BY THE RISER, TREAD, AND BOTTOM OF GUARDRAIL SHALL NOT ALLOW A
THE WORK IS IN CONFORMANCE WITH THE APPROVED PERMIT 6" DIAMETER SPHERE TO PASS THROUGH.
DRAWINGS AND SPECIFICATIONS.

3. DUTIES OF THE CONTRACTOR INCLUDE, BUT ARE NOT LIMITED

TO:
A. NOTIFY SPECIAL INSPECTOR THAT WORK IS READY FOR
INSPECTION AT LEAST 24 HOURS BEFORE THE INSPECTION IS

208.292.3400
REQUIRED.
B. MAINTAIN ACCESS TO WORK REQUIRING SPECIAL INSPECTION MIN. HEADROOM 6' 8"

UNTIL IT HAS BEEN OBSERVED AND INDICATED TO BE IN TREADS

10" MIN.
CONFORMANCE BY THE SPECIAL INSPECTOR AND APPROVED BY
THE BUILDING OFFICIAL.
C. PROVIDE THE SPECIAL INSPECTOR WITH ACCESS TO
APPROVED PERMIT DRAWINGS AND SPECIFICATIONS AT THE JOB
HANDRAIL 34 - 36"
SITE. NOTCHED
STRINGER
D. MAINTAIN JOB-SITE COPIES OF ALL REPORTS SUBMITTED BY
BLOCKING RISERS
THE SPECIAL INSPECTOR. INSULATE R-21
7 3/4" MAX

SOFFIT

GARAGE STAIR DETAIL RAIL PHOTO STAIR RENDERING OVERVIEW RENDERING

FOR ILLUSTRATION ONLY NO SCALE
1/2" = 1' NO SCALE NO SCALE
 S4
9

SHEET NUMBER
40'-7" 62'-7"

6
7" 10 1/2"

Revision #:
40' D1 18' 20' 23'-8 1/2"

115.5' TOW 115.5' TOW

8" CONCRETE WALL
24" X 10" FOOTING W/ (3) #4

SCALE @ 24" X 36"

11'-4"

11'-11"
112' TOW

DATE: 2.20.2017

DRAWN BY: S.H.

CONT. TYP. 5'6" WALLS S7 S5 S6
6" CONCRETE WALL
11 9 8
TYP. UNO
'SSTB24'
2X4 PONY VENT
WALL TYP.
CRAWLSPACE 112' TOW

30"X30"X8" FTG

4'
S3

FOUNDATION PLAN
W/ (4) #4 E.W. 6" CONCRETE WALL W/ #4 VERT
CL 8 VENT
31'-4"

CL
8'-10"

@ 18" O/C W/ STD. 90 HOOK INTO

9'-9" 12'-11"
FTG & #4 HORIZ. @ 16" O/C TYP. 112' TOW

2'
2X4 @ 16" O/C CL
'SSTB16' 'SSTB16'
FURRING WALL
24"X8" DIA.
FOOTING 'SSTB16'

18'-4"
18" X 8" FOOTING W/ (2) #4 CONT. 115.5' TOW
2' CL FOR FURRING WALL USED TO BEAR
CRAWLSPACE FLOOR JOISTS, UNO

13'-8"

12'
(2) 2X8 HDR
10'-1"

(1) 2X CRPL 2X4 @ 16" O/C

9'-4"
2X4 PONY WALL (1) 2X KING FURRING WALL
115.5' TOW
16" X 8" FTG W/ (2) #4 CONT. TYP. @ CRAWL
8" CONCRETE WALL
TYP. UNDER PONY WALL SPACE ACCESS 112' TOW
'SSTB16'
1'-1"

112' TOW 'SSTB16' 'SSTB24'

30" TYP.
6'-7"
58'-9"

CRAWLSPACE

34'
112' TOW

11'-8"
C.J.

VENT

1910 E GRANDVIEW DR.

GARAGE 112' TOW 2X4 PONY

GRANDVIEW
110' TOP OF WALL TYP.
19'-8"

22'
GARAGE FLOOR
3'X3'X8" FTG 5'X6'X12" FTG
W/ (4) #4 E.W. W/ (7) #4 E.W. 'SSTB28'
'SSTB28'
27'-5"

5'
20' 2X4 @ 16" O/C

6'
14'-10"
C.J.
2'

FURRING WALL
CL 4'X68"X8" FTG
2'

6'

W/ (6) #4X42" TRANSV. 'SSTB24'

CL
& (5) #4X62" LONG.
4'

4'
113.33' TOW
2'

4'
3'X3'X8" FTG
S W/ (4) #4 E.W.
1'-8"

5' 8 3/4"
5'-7" 12'-6 3/4" 3'
6'-8"

112' TOW
3'-1"

3' 'SSTB24'
110.33' TOW 3'
2016
3'

S7 S5 S6
2'

2'X3' FTG W/ #4 @
110.33' TOW 11 9 8
8" O/C EA-WAU
'SSTB28'

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

2' 9'-2" 2' 18'-2"

chiefarchitect.com
110.33' TOW
10" 1'-10" 10 1/2"
13'-2" 20'-10" 20' 16' 18' 7'-8 1/2"
34' 62'-7"
S3 S4
8 9 FOUNDATION PLAN - FLOOR "0"
FOUNDATION NOTES 1/4"=1'

8" CONC. STEM WALL W/ #4 VERTS @18" O/C W/ STD 90 HOOK INTO FTG. & #4 HORIZ. @ 12" 0/C
1. FOUNDATIONS TO BEAR A MINIMUM OF 24 BELOW FINISH GRADE

208.292.3400
2. ALL ANCHOR BOLTS TO BE 5/8 DIA X 10 @ 32 O/C UNO.
3. ALL REINFORCING STEEL SHALL BE ASTM A-615, GRADE 60.
4. ALL REINFORCING STEEL TO OVERLAP A MINIMUM OF 24 FOR SPLICES.
5. PROVIDE CORNER BARS TO MATCH CONTINUOUS STEEL.
6. MINIMUM ALLOWABLE CONCRETE COMPRESSIVE STRENGTH SHALL BE 3000 PSI AT 26 DAYS. MAXIMUM AGGREGATE SIZE IS
1. MAXIMUM AIR ENTRAINMENT IS 3%. CEMENT SHOULD BE TYPE 1 OR 2.
7. SOIL BEARING CAPACITY ASSUMED TO BE 1500 PSF (UBC TYPE 4 SOIL). IF SOIL CONDITIONS VARY FROM THIS, THE PROJECT
ENGINEER MUST BE NOTIFIED. ALL FOOTINGS MUST BEAR ON UNDISTURBED SOIL. ALL SLOPES MUST BE STABILIZED.
8. ADJACENT GROUND SURFACES SHALL BE SLOPED AWAY FROM STRUCTURE DRAINAGE OF SURROUNDING AREA SHALL
ALSO BE PROVIDED TO PREVENT ACCUMULATION OF SOIL AND EROSION OF SOIL NEAR FOOTINGS.
9. UNIFORM SOIL CONDITIONS, MUST BE PROVIDED UNDER SLAB AND FOOTINGS. CUT/FILL OR NON-UNIFORM SOIL
CONDITIONS SHOULD BE EXCAVATED AND REPLACED W/ UNIFORM ENGINEERED FILL MATERIAL TO MINIMIZE DIFFERENTIAL
MOVEMENT.
10. THE TOPS OF FOUNDATION WALLS SHALL EXTEND 6 ABOVE THE ADJACENT FINISH GRADE
11. MINIMUM 18 CLEARANCE FOR WOOD JOIST GIRDERS REQUIRED IN THE CRAWL SPACE UNLESS TREATED WOOD IS USED
OVERVIEW RENDERING
THROUGHOUT FLOOR SYSTEM FOR ILLUSTRATION ONLY NO SCALE
 Top Ridge 4

SHEET NUMBER
25.8' FALSE DORMER

7
1'-8"

Revision #:
Top Ridge 3
24.1'
STAGGERED EDGE SHAKE SEAMED METAL ROOFING

1'-8"
PANEL FIBER CEMENT 2:12
BOARD/BATTEN FIBER CEMENT
Top Ridge 2

5'-10 3/8"
22.4' ASPHALT SHINGLE ROOFING

SCALE @ 24" X 36"

PREFORMED BEAM

DATE: 2.20.2017

DRAWN BY: S.H.

CEDAR FASCIA & TRIM
Top of Plate 12
16.6'

3'-5 5/8"
8 DECORATIVE BEAM

42" CABLE RAILING

Top Ridge 1
13.1' Top of Plate
4'-8 1/8"

12' 1 1/8
7" LAP CEDAR
TEXTURE
Top of Subfloor - 2nd
8.4' FIBER CEMENT

ELEVATIONS
EXTERIOR
8'-5 1/4"

STONE CAP

Top of Subfloor - 1st Floor

0.0'
2'-4"

Top of Slab
-2.3'
2'

Top of Footing
-4.3' CULTURED, DRESSED FIELDSTONE

FRONT ELEVATION
1/4"=1'
Top Ridge 7
24.5'
4'

Top Ridge 6

1910 E GRANDVIEW DR.

20.5'

GRANDVIEW
6'

Top Ridge 5
14.5'
Ridge
5'-5 3/8"

Top of Plate 13.1'

3'-11 7/8"
12' 1 1/8

Top of Plate Top of Plate

9.1' 9.1'

5'-10 3/8"
9'-1 1/8"

Top of Wall
3.2'
Top of Subfloor 2016
0.0'
2 1/4"

6'-5"
Top of Foundation
-0.2'

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

3'

chiefarchitect.com
Top of Footing Top of Footing
-3.2' -3.2'

REAR ELEVATION
1/4"=1'

208.292.3400
S. SIDE ELEVATION N. SIDE ELEVATION
1/8"=1' 1/8"=1'
 SHEET NUMBER

8 Revision #:
ATTIC

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

ATTIC TREY CEILING
FORMED BY TRUSSES 24 1/2"
18" 18"
25" 93" 12
DOORWAY 8

GLASS

145 1/8"
66 5/8"

121 1/8"

109 1/8"
109 1/8"

109 1/8"

& DETAILS
SECTIONS
1/2"
42"

SHOWER PANTRY HALL MASTER BEDROOM

FIREPLACE LIVING KITCHEN

S5 LIVING SECTION
3/8" = 1'

MASTER BEDROOM SECTION

S6
3/8" = 1'

1910 E GRANDVIEW DR.

GRANDVIEW
@ TOP & BOTTOM FLANGES
D3 STRUCTURAL I-BEAM
8 SPAN BETWEEN POSTS

CONCRETE SLAB
SLOPE 1/4" FROM HOUSE WELDED WIRE FABRIC
6X6XW2-9XW2-9 D3
IBEAM SPAN TO POSTS
iJOIST P.T JOIST ICE & WATER SHIELD. 8
2016
INSTALL UNDER SIDING
D4 STRUCTURAL I-BEAM 3/4" T&G PLYWOOD D4 STRUCTURAL I-BEAM
8 TO STEEL POST 8 TO STEEL POST
@BOTH SIDES

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
OF FLANGE 1/8 2 5/8" THD'D STUDS
@ 24" O/C FOR WALL PLATE
I-JOIST PER PLAN
I-BEAM END
HANGER PER PLAN
9'-7 1/8"

3/16

I-BEAM SIDE
EQ EQ
STEEL I-BEAM PER PLAN
STEEL PLATE x6x10
" A307 BOLTS
1"
STEEL POST PER PLAN

208.292.3400
@BOTH SIDES
D8 OF FLANGE
D52 POST TO FLOOR
1/8
5/8" THD'D STUDS
D5 POST TO FLOOR 8 CONNECTION@ 24" O/C FOR WALL PLATE
10 I-JOIST PER PLAN
I-BEAM END
D4 I-JOISTS TO I-BEAM / I-BEAM TO POST CONNECTION
8 CONNECTION HANGER PER PLAN
POST
8 1"=1'
3/16

I-BEAM SIDE
1/4
EQ EQ
5/8"
STEEL PLATE

10"
STEEL I-BEAM PER PLAN
3/4"
ANCHOR BOLTS
STEEL PLATE x6x10
" A307 BOLTS STEEL POST PER PLAN
1"
STEEL POST PER PLAN
10"

I-JOISTS TO I-BEAM / I-BEAM TO POST CONNECTION D5 POST CONNECTION AT FLOOR

S3 SECTION AT GARAGE SECTION AT GARAGE 8
1/2" = 1'
S4 1"=1' 1"=1'
1/2" = 1'
 SHEET NUMBER
12
FINISH SIDING

9
8
FLASHING

Revision #:
12 STONE CAP
2 FLASHING
GRADE 6" 2X FRAMING
BELOW WALL MEMBER

1/2" SHEATHING

40 1/2"

SCALE @ 24" X 36"

STEM WALL

DATE: 2.20.2017

DRAWN BY: S.H.

DORMER RIM JOIST
JOIST
OPENING WATER BARRIER
CAST-IN-PLACE
1/2"DIA EXPANSION
ATTIC 72" 30" ANCHOR BOLT TYP.
ANCHORS @48" O/C MAX
23" FOOTING

37"
12 VAPOR BARRIER
5 DRAINAGE SYSTEM REBAR TYP.

D1 RETAINING
RETAINING FOUNDATION
FOUNDATION ANDWALL
AND EXTERIOR EXTERIOR WALL
9 3/8"=1'

109 1/8"

& DETAILS
SECTIONS
VAPOR BARRIER
SHEATHING
KITCHEN OFFICE FINISHED FLOOR
SIDING
SUB-FLOOR
TREATED SILL PLATE
JOIST FLASHING
CAST-IN-PLACE ANCHOR BOLT
JOIST HANGER
LAP JOISTS
VAPOR BARRIER
2 - #4 STEEL REBAR

D2 DRAINAGE SYSTEM
9 2X4 FRAMED BEARING WALL
VAPOR BARRIER TYP. 18" MIN. CLEARANCE
D2 FOUNDATION / /FLOOR
FOUNDATION FLOORDETAIL
DETAIL
9 3/8"=1'

OFFICE SECTION
S1 3/8" = 1'
12
8

1910 E GRANDVIEW DR.

12 FALSE DORMER

GRANDVIEW
2

40 1/2"
TREY CEILING
LSTA24 TYP. @ EA. RAFTER
FORMED BY TRUSSES 1 3/4" LVL RIDGE BOARD
12 SDWC15600 TYP. BEVELED BEARING BLOCK

17"
8 EA. RAFTER END RAFTER PER PLAN

16 1/8"

97 3/4"
8'-1 1/8"
97 1/8"
2016
ATTIC STAIRWAY FAMILY BEAM PER PLAN

BALCONY
D6 GABLE BEAMS TO RAFTERS
7 1/4"

4 7/8"
9

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
1"=1'
3/4"
14"

9 1/4"
GLB
109 1/8"

1/4"
PL1/4" KNIFE PLATE w/
(4) SDWS 3" TO BEAM &
(2) 1/2" DOWELS TO POST

5"
COUNTERSINK & PLUG

9'-7 1/8"
115 1/8"

115 1/8"

208.292.3400
KING POST PER PLAN

3"
KNIFE PLATE CONN.

1 1/2"
SHOWER CLOSET LAUNDRY
GARAGE

D1
9

4"
CRAWL SPACE
D7 POST TO GLB KNIFE PLATE CONNECTION
ACCESS
9 1"=1'

S4 GARAGE/FLOOR 2 SECTION
3/8" = 1'
 1 2 3 4 5 6
WALL PANEL NOTES:

SHEET NUMBER

10
S4
F4 9 F2
11

Revision #:
11
AA
O TYPE. @ ALL EXTERIOR WALLS, UNO
F3
11
SHEAR WALL PER SCHEDULE
A

SCALE @ 24" X 36"

S7 S5 S6

DATE: 2.20.2017

DRAWN BY: S.H.

11 9 8
'HDU2'

B
S3
8 1
'HDU2' F3
'HDU2' 11
SHEAR WALL PLAN, FLOOR 2 S5
8
S5
8
'HDU2'
A
3/16"=1'

SHEAR WALL
LOCATIONS
S1
5
'MSTC52' ACROSS
RIM BOARD
PERF.
C
B 'HDU2' 4 F1
B 'HDU5'
11
'HDU8'

PERF.
PERF.
A
A PERF. 1
PERF.
13 B C
2 4
B
'HDU8' PERF.
D7 D 'HDU8'
8
6 D
B2
6 'HDU5'
'MSTC52' ACROSS
'MSTC40' TO STEEL PERF.
RIM BOARD
BEAM BELOW A S7

1910 E GRANDVIEW DR.

8
12 'MSTC40' TO STEEL

GRANDVIEW
BEAM BELOW C

C 'HDU5' S7 S5 S6 F2
D6 F1 11 9 8 11
8 11
WIND
F4 'HDU8'
F4 D8
11
11 9 SEE PORTAL FRAME DETAIL

WIND
2
S3
8
S4
9 3 S3 S4 SHEAR WALL PLAN, MAIN FLOOR
N 8 9
3/16"=1'

HOLD-DOWN SCHEDULE SHEAR WALL SCHEDULE

MARK WALL SHEATHING, FASTENER EDGE FIELD 5
MARK HD, ANCHOR HD STUD FASTENERS, NOTES D SOLE PLATE BLOCKING/RIM JOIST 8 "x10" A.B. SEE NOTES:
E N G TH TH
0 NOT REQ'D N/A N/A E N NG 7
O.S.B. OR 12" PLY. UNBLK'D, 8d 6" O.C. 12" O.C. 16d @ 8" O.C. A35 @ 32" O.C. 48" O.C. 3
L E AA 16 "
TL 2016
1 'HDU2' W/ 'SSTB16'(5 8 ") (2) 2x 6-'SDS' "x2" SCREWS CU 7
O.S.B. OR 12" PLY. BLK'D, 8d 6" O.C. 12" O.C. 16d @ 6" O.C. A35 @ 16" O.C. 48" O.C. 2,5
A 16 "
5 1/8x12 GLB
2 'HDU4' W/ 'SSTB16'(5 8 ") (2) 2x 10-'SDS' "x2" SCREWS B 7
16 " O.S.B. OR 12" PLY. BLK'D, 8d 4" O.C. 12" O.C. 16d @ 4" O.C. A35 @ 16" O.C. 32" O.C. 2,5,6
7
(2) LSTA24 @ EA. PANEL 3 'HDU4' W/ 'SSTB20'(5 8") (2) 2x 10-'SDS' "x2" SCREWS C 16 " O.S.B. OR 12" PLY. BLK'D, 8d 3" O.C. 12" O.C. 16d @ 3" O.C. A35 @ 12" O.C. 24" O.C. 2,5,6
A N 'D
7/16" PLYWOOD BOTH SIDES
4 5 (2) 2x 14-'SDS' "x2" SCREWS R SPREQ 7 1 2" O.C. 12" O.C. 16d @ 2.5" O.C. A35 @ 8" O.C. 18" O.C. 1,2,5
'HDU5' W/ 'SSTB24'( 8") D 16 " O.S.B. OR 2" PLY. BLK'D, 8d
EA T

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

OF PANEL, NAIL W/ (2) ROWS
CL S NO

chiefarchitect.com
@ 3" O/C AROUND PERIMETER 5 'HDU8' W/ 'SSTB28'(7 8") (2) 2x 20-'SDS' "x2" SCREWS IL E 7
16 " O.S.B. OR 12" PLY. (2) FACES, BLK'D, 8d 6" O.C. 12" O.C. (2) ROWS16d @ 6" O.C. A35 @ 8" O.C. 24" O.C. 2,5,6
NA
6 'HDU8' W/ 'SSTB28'(7 8") (3) 2x 20-'SDS' "x2" SCREWS F 7
16 " O.S.B. OR 12" PLY. (2) FACES, BLK'D, 8d 4" O.C. 12" O.C. (2) ROWS16d @ 4" O.C. A35 @ 6" O.C. 16" O.C. 2,4,5,6
T
7 'HDU11' W/ 'SB1x30'(1") 6x OR (4) 2x 30-'SDS' "x2" SCREWS J OIS G 7
16 " O.S.B. OR 12" PLY. (2) FACES, BLK'D, 8d 3" O.C. 12" O.C. (2) ROWS16d @ 3" O.C. A35 @ 6" O.C. 12" O.C. 2,4,5,6
RIM 7 1
8 'HDU11' W/ 'SB1x30' (1") 8x OR (5) 2x 30-'SDS' "x2" SCREWS D 16 " O.S.B. OR 2" PLY. (2) FACES, BLK'D, 8d 2" O.C. 12" O.C. (2) ROWS16d @ 2" O.C. LPT4 @ 8" O.C. EA. SIDE 9" O.C. 1,2,4,5
10' MAX.

E N G TH H
N
9 'HDU14' W/ 'PAB8' (1") 6x OR (4) 2x 36-'SDS' "x2" SCREWS LE J 7
16 " O.S.B. OR 12" PLY.BLK'D, 10d 3" O.C. 12" O.C. 16d @ 2.5" O.C. A35 @ 8" O.C. 12" O.C. 2,5,6
"
OR ALTERNATE PER 11" EMBED. W/ 17" 1 5/8
R " GYP. UNBLK'D, 5d COOLER OR #6" SCREW 7" O.C. 7" O.C. 16d @ 8" O.C. 16d TOENAIL @ 6" O.C. 48" O.C. 3
NOTE 8 COVER HORIZ. ALL SIDES MIN FO S K
V IDEANCERAP L 5
GYP. BLK'D,5d COOLER OR #6-1" SCREW 7" O.C. 7" O.C. 16d @ 8" O.C. 16d TOENAIL @ 6" O.C. 48" O.C. 3
10 'HD19' W/ 'PAB9' (118 ") 6x OR (4) 2x 5-1" 'A307' BOLTS O T T 8"
PR DIS ST' S OF
OR ALTERNATE PER 12 12" EMBED. W/ 19" D M ER S M 5
GYP. BLK'D, 6d COOLER OR #6-1" SCREW 4" O.C. 4" O.C. 16d @ 8" O.C. 16d TOENAIL @ 6" O.C. 48" O.C. 3
E N & 'C MBENERD. .
8"
COVER HORIZ. ALL SIDES S ' U
NOTE 8 ' C N
L S T EN ED N 1
2 " GYP.(2) SIDES, UNBLK'D, 7" O.C. 7" O.C. 16d @ 8" O.C. 16d TOENAIL @ 6" O.C. 48" O.C. 3
11 'MSTC28' (2) 2x 16-16d SINKERS Q UA FA A CH S CH
E E 5d COOLER OR #6-1" SCREW
(2) 5/8" A.B. PER WALL PER PLAN IN SEE
12 'MSTC40' (2) 2x 32-16d SINKERS STRAP ACROSS FLOOR OR

208.292.3400
5 7" O.C. 7" O.C. 16d @ 6" O.C. A35 @ 32" O.C. 48" O.C. 3
PANEL MIN. 4x OR (2)2x
L E FERS P 8 " GYP. (2) SIDES, BLK'D,
HOLDOWN PER PLAN (MIN.) TO MATCH 13 'MSTC52' (2) 2x 48-16d SINKERS NOT TO SCALE
DU N 6d COOLER OR #6-1" SCREW
C HEASTE
CONC. STEM WALL & WALL WIDTH
14 ES F 4" O.C. 4" O.C. 16d @ 6" O.C.
REINF. PER PLAN EACH SIDE
'MSTC66' (2) 2x 68-16d SINKERS SE Q 5
8"
GYP. (2) SIDES, BLK'D, A35 @ 16" O.C. 32" O.C. 3
CPL'D COUPLE HOLD-DOWNS ACROSS FLOOR, GRADE A36 6d COOLER OR #6-1 " SCREW
CONC. SLAB & REINF. DOUBLE R
THD'D ROD OF SAME IN LIEU OF ANCHOR N PE PERF.SPECIFIED SHEARWALL CONSTRUCTION ALSO APPLIES ABOVE AND BELOW ALL OPENINGS BETWEEN THE FIRST AND LAST HATCHED WALL SEGMENTS
PER PLAN BOTTOM PLATE
NOTES: - D OW
LD LE F.T. SPECIFIED SHEARWALL CONSTRUCTION APPLIES TO HATCHED WALL SEGMENT BESIDE OPENING, FOR THE FULL HEIGHT OF THE OPENING.
1. HOLD-DOWN MARKS ON PLAN APPLY THE BASE OF FRAMED WALLS ON THAT HO E DU
H
PLAN, OR TO TOP OF CONC. U.N.O. SC GENERAL NOTES: FRAMING SPECIFIC NOTES:
2. PANELS FROM INTERSECTING SHEAR WALLS SHALL BE EDGE NAILED TO ALL SOLE PLATES ARE TO BE 2x MIN. 1. FRAMING AT ADJOINING 3. MAXIMUM STUD SPACING 5. MIN. .229x3x3" STEEL PLATE
HOLD-DOWN MEMBERS TO SHARE CORNER HOLD-DOWNS. THE LARGER OF T THICKNESS. PANEL EDGES SHALL BE 3x FOR SHEARWALL IS 16" O.C. WASHERS REQ'D @ EACH
24" MIN.

THE HOLD-DOWNS SPECIFIED SHALL BE USED, U.N.O. J OIS

PANELS SHALL BE BACKED W/ 2x OR WIDER AND 4. PANEL JOINTS ON ANCHOR BOLT
RIM
3. EDGE NAIL SHEATHING TO THE FOUNDATION MUD-SILL PLATE D OR WIDER FRAMING. PANEL EDGE NAILING SHALL OPPOSITE SIDES OF WALL 6. FRAMING AT ADJOINING
D RO E
4. HOLD-DOWNS OCCUR AT EACH END OF EACH SHEARWALL SEGMENT
DE UL HOT DIPPED OR TUMBLED BE STAGGERED. SHALL BE OFFSET TO FALL PANEL EDGES SHALL BE 3x
5. HOLD-DOWN LOCATION AS SHOWN ON THE PLAN SUPERCEDES NOTE #4 R E A CHE D GALVANIZED NAILS ONLY, BOX 2. MAXIMUM STUD SPACING ON DIFFERENT FRAMING OR WIDER AND PANEL EDGE
TH R S
6. PANEL EDGE NAILING SHALL BE EVENLY DISTRIBUTED AMONG MEMBERS IN PE NAILS MAY BE USED FOR FOR SHEARWALL IS 16" O.C. MEMBERS OR FRAMING NAILING SHALL BE
16"2'-6"
MIN. WN
HOLD-DOWN STUDS, WHICH SHALL BE LAMINATED TOGETHER WITH 12d @6"
D DO UL E PANELS, COMMON NAILS ONLY OR 24" O.C. WITH LONG SHALL BE 3x OR WIDER AT STAGGERED, UNLESS SDC IS
L D
O.C. U.N.O. HO CHE ELSEWHERE PANEL DIMENSION ACROSS ADJOINING PANEL EDGES NOTED AS A, B, OR C UNDER
S
D8 PORTAL FRAME ELEVATION 7. GRADE A36 THD'D ROD OF SAME MAY BE USED IN LIEU OF 'PAB'. A3 8x2x2"
PL WASHER SHALL BE INSTALLED AT THE BASE, NUTTED BOTH SIDES W/ A
PE
R STUDS AND PANEL EDGE NAILING PROJECT DESIGN CRITERIA IN
SHALL BE STAGGERED THE GENERAL NOTES
10 1/2"=1' HEAVY HEX NUT AT THE BOTTOM SIDE COUPLED HOLD-DOWN ACROSS FLOOR
NOT TO SCALE
 WALL FRAMING NOTES:

11
SHEET NUMBER
FRAMING & STRUCTURAL NOTES

Revision #:
1. WINDOW ROUGH OPENING: 1/2" FOR TOP/ (3) 2 X 12
BOTTOM & 1/2" FOR SIDES. CONFIRM WINDOW
MFG. SPECS. BEFORE FRAMING
(3) 2 X 10 (2) 2 X 12
2. WALL HEADERS ON EXTERIOR WALLS: (2) 2" X
10" DF 2 TYP. INSULATED w/ (1) 2x CRIPPLE &
(1) 2X KING, UNO GL 5 1/8 X 12 GL 5 1/8 X 14 1/4

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

3. PROVIDE DOUBLE FLOOR JOISTS. UNDER ALL
WALLS RUNNING PARALLEL BOTH GARAGE OPENINGS:
4. PROVIDE FIRE BLOCKING, DRAFT STOPS AND (2) 2X CRIPPLES EA. SIDE
FIRE STOPS AS PER I.B.C. SEC. R502.12. (2) 2X KINGS EA. SIDE
5. PROVIDE POSITIVE CONNECTIONS AT EACH
END OF ALL POSTS AND COLUMNS TO RESIST
LATERAL DISPLACEMENT
6. ALL LUMBER NOT SPECIFICALLY NOTED TO BE
D.F. #2 OR BETTER. ALL WOOD IN PERMANENT
CONTACT WITH CONCRETE SHALL BE

F1 FRONT WALL FRAME DETAIL

PRESSURE TREATED UNLESS AN APPROVED

WALL FRAMING
BARRIER IS PROVIDED
7. SEE ROOF FRAMING FOR ADDITIONAL 1/4"=1'
FRAMING DETAIL

LUMBER SPECIES:
A. POSTS, BEAMS, HEADERS, JOISTS, AND
RAFTERS TO BE DF-#2
B. EXPOSED ARCH BEAMS TO BE DF-#1 OR
BETTER, CEDAR
C. SILLS, PLATES BLOCKING, AND BRIDGING TO
BE DF-#2
D. ALL STUDS TO BE DF#2 OR BETTER
E. SHEATHING SHALL BE AS FOLLOWS:
WALL SHEATHING SHALL BE 1/2'' INT-APA
RATED OR 7/16'' OSB
FLOOR SHEATHING SHALL BE 3/4'' T & G INT-APA
RATED PLYWOOD

F3 REAR WALL FRAME DETAIL

1/4"=1'

1910 E GRANDVIEW DR.

GRANDVIEW
GL 5 1/8 X 10 1/2 (3) 2 x 10 (3) 2 x 10

F5 2ND FLOOR WALL FRAME DETAIL

1/4"=1'

2016
F2 SOUTH SIDE WALL FRAME DETAIL
S7 ENTRY/LIVING SECTION
1/4"=1'

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

1/4"=1'

chiefarchitect.com
(3) 2 X 10
8'-1 1/8"
1'-10"

9 1/4"
14"
5'-10 3/8"

208.292.3400
9'-1 1/8"

6'-3 1/8"

10'-0 5/8"

115.5' TOW STEM WALL

113.33' TOW STEM WALL

6'-5"

23 1/2" 3/4"

4'-2 1/4"
14"

110.33' TOW STEM WALL

10"

8" 2'-4"

110' GARAGE FLOOR

8"

FRAMING OVERVIEW
F4 NORTH SIDE WALL FRAME DETAIL FOR ILLUSTRATION ONLY NO SCALE
1/4"=1'
FRAMING NOTES: S4

SHEET NUMBER

12
9

Revision #:
1. ALL DIMENSIONAL LUMBER SHALL BE DOUGLAS FIR LARCH NO. 2 AND LARGER LUMBER
SHALL BE DOUGLAS FIR NO.1 OR BETTER, UNO.
2. I-JOISTS AND LVL MEMBERS MUST BE INSTALLED IN COMPLIANCE WITH THEIR LISTINGS.
3. ALL TRUSSES SHALL BE ENGINEERED AND STAMPED WITH A SEPARATE ENGINEERED
DOCUMENT. /C
16" O S7 S5 S6
4. PRE-MANUFACTURED WOOD JOISTS & TRUSSES SHALL BE OF THE SIZE AND TYPE SHOWN 10 @
" TJI2
11 9 8
14

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

ON THE DRAWINGS, MANUFACTURED BY THE TRUSS OR JOIST COMPANY. NO MEMBERS
SHALL BE MODIFIED AND MUST BE INSTALLED IN COMPLIANCE WITH THEIR LISTINGS. 2X4 PONY
2X4 @ 16" O/C TYP.
PROVIDE BRIDGING IN CONFORMANCE WITH THE MANUFACTURERS RECOMMENDATIONS. WALL TYP.
LAP JOISTS
MEMBERS AND BRIDGING SHALL BE CAPABLE OF RESISTING THE WIND UPLIFT NOTED ON
THE DRAWINGS. THE MANUFACTURER SHALL VISIT JOB SITE AS REQUIRED AND VERIFY
S3
THE PROPER INSTALLATION OF THE JOISTS & TRUSSES IN WRITING TO THE CONTRACTOR/ 8

ENGINEER. PRE-MANUFACTURED WOOD JOIST ALTERNATES WILL BE CONSIDERED,

2X4 @ 16" O/C
PROVIDED THE ALTERNATE IS COMPATIBLE WITH THE LOAD CAPACITY, STIFFNESS,
FURRING WALL
DIMENSIONAL, AND FIRE RATING REQUIREMENTS OF THE PROJECT, AND IS ENGINEER OR
ICBO APPROVED.

FLOOR FRAMING
5. ALL JOISTS AND RAFTERS SHALL HAVE SOLID BLOCKING AT THEIR BEARING POINTS.
CONNECT BLOCKING TO TOP OF WALL W/ SIMPSON FRAMING ANCHORS. ROOF JOIST TO IUS TYP.
HAVE HURRICANE CLIPS @ 48 O.C. OR SIMPSON H-1 HURRICANE CLIPS @ 24 O/C. @ 16" O/C (2) 2X8 HDR
14" TJI210
(1) 2X CRPL 2X4 @ 16" O/C
INSTALL PRIOR TO ROOF SHEETING. 3' FURRING WALL
(1) 2X KING

2'-7"
6. ALL WOOD & IRON CONNECTIONS MUST CARRY THE CAPACITY OF THE MEMBER. THE PROVIDE LSL OR TJI 2X4 @ 16" O/C TYP. TYP. @ CRAWL
CONTRACTOR IS RESPONSIBLE FOR ALL CONNECTIONS. IF OTHER THAN STANDARD BLOCKING, TYP. LAP JOISTS SPACE ACCESS

CONNECTIONS ARE REQUIRED, CONTACT PROJECT ENGINEER FOR ASSISTANCE. USE

SIMPSON OR OTHER ICC LISTED CONNECTIONS.
CRAWL SPACE 30" TYP.
7. ALL HANGERS AND NAILS IN CONTACT WITH PRESSURE TREATED LUMBER SHALL BE ACCESS UNDER
3/4" T&G APA STRUC-I-
SIMPSON Z-MAX HANGERS OR STAINLESS STEEL. STAIRWAY
O/C FLOOR PLYWOOD
10 @ 16"
8. NAILS: ALL SHEAR WALL SHEATHING NAILS SHALL BE COMMON NAILS ALL FRAMING NAILS 14" TJI2 SHEATHING. GLUE &
SCREW @ 4" O/C AT ALL
SHALL BE COMMON NAILS. OR HOT DIPPED GALVANIZED BOX NAILS. FRAMING NAILS
SUPPORTED PANELS
SHALL BE PER IBC TABLE 2304.9.1 OR IRC TABLE R602.3(1). EDGES, 12" O/C FIELD.
2X4 @ 16"
2X4 O/C TYP.
PONY
9. THRUST SHALL BE ELIMINATED BY THE USE OF COLLAR TIES OR CEILING JOISTS, WHERE
LAP WALL
JOISTSTYP.
REQUIRED.
10. BEVELED BEARING PLATES ARE REQUIRED AT ALL BEARING POINTS FOR BCI & TJI
RAFTERS. 14" TJI210 @ 16" O/C
2X4 @ 16" O/C
11. ALL COLUMNS SHALL EXTEND DOWN THRU THE STRUCTURE TO THE FOUNDATION. ALL
FURRING WALL
COLUMNS SHALL BE BRACED AT ALL FLOOR LEVELS. COLUMNS SHALL BE THE SAME
WIDTH AS THE MEMBERS THAT THEY ARE SUPPORTING.
12. ALL EXTERIOR WALLS SHALL BE SHEATHED WITH 1/2 THICK 2-M-W SHEATHING OR EQUAL
W/ 8D COMMON NAILS @ 6 O.C. @ EDGES @ 12 O.C. IN FIELD, UNO. SHEATHING SHALL BE D9
12

1910 E GRANDVIEW DR.

CONTINUOUS ACROSS ALL HORIZONTAL FRAMING JOINTS.

GRANDVIEW
13. ALL ROOF SHEATHING AND SUB-FLOORING SHALL BE INSTALLED WITH FACE GRAIN
PERPENDICULAR TO SUPPORTS, EXCEPT AS INDICATED ON THE DRAWINGS. ROOF
SHEATHING SHALL EITHER BE BLOCKED, TONGUE-AND-GROOVE, OR HAVE EDGES
SUPPORTED BY PLYCLIPS. SHEAR WALL SHEATHING SHALL BE BLOCKED WITH 2X S7 S5 S6
11 9 8
FRAMING AT ALL PANEL EDGES. SHEATH ROOF PRIOR TO ANY OVER FRAMING.
14. PLYWOOD PANELS SHALL CONFORM TO THE REQUIREMENTS OF "U.S. PRODUCT
ATTIC ACCESS IN
STANDARD PS 1 FOR CONSTRUCTION AND INDUSTRIAL PLYWOOD" OR APA PRP-108
STORAGE CLOSET
PERFORMANCE STANDARDS. UNO, PANELS SHALL BE APA RATED SHEATHING, EXPOSURE
1, OF THE THICKNESS AND SPAN RATING SHOWN ON THE DRAWINGS. PLYWOOD S3
8
S4
9

INSTALLATION SHALL BE IN CONFORMANCE WITH APA RECOMMENDATIONS. ALLOW 1/8"

12" X 5 1/8" POST 3 1/2" X 5 1/2" S5 S5
SPACING AT PANELS ENDS AND EDGES, UNLESS OTHERWISE RECOMMENDED BY THE GLULAM BEAM FOUNDATION
8 8

PANEL MANUFACTURER. MAIN FLOOR FRAMING PLAN HUCQ612 SUPPORT BELOW

W/(1) 2X KING STUD
15. GLULAM BEAMS SHALL BE FABRICATED IN CONFORMANCE WITH U.S. PRODUCT
3/16"=1' POST 3 1/2" X 5 1/2" ON E. SIDE
STANDARD PS 56, "STRUCTURAL GLUED LAMINATED TIMBER" AND AMERICAN INSTITUTE FOUNDATION
S1
OF TIMBER CONSTRUCTION, ATTIC 117. EACH MEMBER SHALL BEAR AN ATIC OR APA-EWS SUPPORT BELOW 5

W/(1) 2X KING STUD

IDENTIFICATION MARK AND BE ACCOMPANIED BY A CERTIFICATE OF CONFORMANCE. ONE
ON E. SIDE
COAT OF END SEALER SHALL BE APPLIED IMMEDIATELY AFTER TRIMMING IN EITHER SHOP 2016
OR FIELD.
16. GLULAM BEAMS SHALL BE 24F-V4 DF/DF OR EQUAL FOR SIMPLE SPANS, AND 24F-V8 DF/DF
FOR CONTINUOUS SPANS. POST 5 1/2" X 5 1/2"
17. VERSA-LAM & MICRO-LAM MEMBERS SHALL BE GRADE 2.0 E.

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
18. ANY WOOD IN CONTACT W/ CONCRETE OR MASONRY SHALL BE PRESSURE TREATED.
19. ALL WOOD & IRON CONNECTORS SHALL BE INSTALLED W/ ALL REQUIRED FASTENERS IN
14" TJI230 @ 16" O/C
COMPLIANCE W/ THEIR WRITTEN APPROVAL. POST 5 1/2" X 5 1/2"
20. ALL HANGERS TO BE SIMPSON OR EQUAL. POCKET BEAM INTO
WALL, FULL BEARING

HSS 5X5X1/4"
6x6 DF #2 POST
4"
3/4" 2 1/2" 3/4" HSS 5X5X1/4" 13.5" X 5 1/8"
3" 1 1/2"

PL 4"x10-1/2"x1/4" w/
(6) SDS x 2-1/2 SCREWS 14" STEEL IBEAM W14 X 30 GLULAM BEAM
S2.5 S2.5

208.292.3400
EACH SIDE OF POST HSS 5X5X1/4"
1/4
S2.5 S2.5

14" STEEL IBEAM W14 X 30

3"

1/4 S2.5 S2.5

3"

PL 6x6x5/8 S7
8
4"

1/4 HSS 4x4x1/4 F5 F5 6X6 POSTS

11 11
(4) #4 BAR, 10" W/ EPC6Z & ABU66
1/4
1 1/4" TYP. INTO BASE DBL P.T. 2X10 @ 16" O/C P.T. 2X10 @ 16" O/C
16" SONO w/ (4) #4 VERTS W/ BA410 TO STEEL BEAM W/ LB210 TO STEEL BEAM
w/ STD HOOK INTO FTG
& #3 TIES @ 8" O/C

FTG & REINF. PER PLAN S7

11

2ND FLOOR FRAMING OVERVIEW 2ND FLOOR FRAMING PLAN

D9 STANDOFF POST BASE S3
8
S4
9
3/16"=1'
FOR ILLUSTRATION ONLY NO SCALE
12 1"=1'
 VENT BAFFLES

SHEET NUMBER

13
12 2 X 10 ENERGY
FINISH ROOFING

Revision #:
8 HEEL BLOCKING
ROOFING MEMBRANE

8 : 12
SHEATHING
FLASHING
REDUCED
OVERHANG

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

ICE SHIELD

FASCIA
8 : 12

8 : 12 HURRICANE CLIP
8 : 12
SUB-FASCIA
8 : 12 8 : 12
SOFFIT
8 : 12

SCREENED VENT
D9 SIDING
13

8 : 12
SHEATHING

8 : 12
8 : 12

8 : 12

ROOF EVE W/ ENERGY HEEL

8 : 12
D9

ROOF & FRAMING

13
3/4"=1'

8 : 12
8 : 12

PLAN
ICE SHIELD
8 : 12

2x10 RAFTERS @ 24" O/C

8 : 12
W/ 'HI' @ EA. END

8 : 12
2x6 LADDER FRAME
8 : 12 @ 24" O/C TYP.

2 : 12
MSTC40 STRAP @ SIDE OR FULL BEARING
2 : 12

TOP OF BEAM TO WALL PL. TO HDR BELOW 8 : 12

DORMER OPENING

8 : 12 8 : 12
POCKET BEAM INTO WALL, GL 5 1/8 X 10 1/2" (3) 2x10 HDR
8 : 12
FULL BEARING W/ (1) 2X CRIPPLE & 8 : 12
GL 5 1/8 X 10 1/2"

GL 5 1/8 X 10 1/2"

GL 5 1/8 X 10 1/2"

EACH SIDE (1) 2X KING

DORMER (2) 2x10 HDR
ICE SHIELD
LOW WINDOW (3) 2x10 HDR
D6
W/ (1) 2X CRIPPLE &
9
(1) 2X KING
ICE SHIELD RIDGE VENTING
2x8 RAFTERS
8 : 12 8 : 12

1910 E GRANDVIEW DR.

@ 24" O/C

GRANDVIEW
'CJT5' 'CJT5'

ROOF PLAN
PREFORMED CURVED BEAM 5 1/2 X 6" GLC (2) 2x6 MIN (2) 2x6 MIN
5.125" X 10.5" MIN. DEPTH D7 3/16"=1'
FOR GL OR 6X12" MIN 9
GLC 5 1/8 X 6"
DEPTH DF#1
KING POST
ROOF FRAMING PLAN
FOR ILLUSTRATION ONLY NO SCALE

(4) 2x6 MIN

(3) 2x6 MIN

TRANSFER LOAD
DOWN TO FTG.
2016
ROOF FRAMING NOTES:
COMBINATION HAND FRAME AND TRUSS FRAMING FOR
ROOF

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
1. TRUSS DRAWING IS FOR ILLUSTRATION ONLY. ALL
TRUSSES SHALL BE INSTALLED & BRACED TO
MANUFACTURER'S DRAWINGS & SPECIFICATIONS BEAM HELD
2. ALL TRUSSES SHALL CARRY MANUFACTURER'S (2) 2x6 MIN
STAMP (2) 2x6 MIN
3. TRUSSES SHALL NOT BE FIELD ALTERED WITHOUT
PRIOR ENGINEERING APPROVAL
4. ALL TRUSSES SHALL HAVE DESIGN DETAILS &
DRAWINGS ON SITE FOR FRAMING INSPECTION.
5. ALL CONNECTIONS OF RAFTERS, JACK OR HIP
TRUSSES TO MAIN GIRDER TO BE PROVIDED BY

208.292.3400
TRUSS MANUFACTURER
6. ALL ROOF FRAMING 24" O.C.UNO
STICK FRAME
7. ALL ROOF OVERHANGS 16"; DORMER OVERHANGS
DORMER
10", UNO
8. INSTALL ICE SHIELD AS REQUIRED
9. INSTALL POLYISOCYANURATE FOAM TYPE
(3) 2x6 MIN
INSULATION AT FLOOR AND PLATE LINES, OPENINGS
IN PLATES, CORNER STUD CAVITIES AND AROUND
DOOR AND WINDOW ROUGH OPENING CAVITIES.
10. ATTIC VENTILATION: REQUIRED ABOVE HOUSE
(3) 2x6 MIN
11. ROOF VENTING HIGH/LOW
STICK FRAME
12. ZONE 'B'. MIN. LOAD SHALL BE 50 LBs PER SQUARE
STICK FRAME FALSE DORMER
FOOT BALCONY
13. WALL HEADERS: (2) 2 X 10 DF 2 TYP. UNO
14. ROOF SHEATHING 15/32" OSB OR 1/2" PLYWOOD
32/16 APA RATED W/ 8d @ 6" O/C ALL SUPPORTED TRUSS PLAN
PANEL EDGES, 12" O/C FIELD
15. ROOF TRUSS MANUFACTURER: 3/16"=1'
_____________________________
WINDOW SCHEDULE DOOR SCHEDULE

SHEET NUMBER

14
Window Schedule, Floor 1 Window Schedule, Floor 2
WINDOW NOTES: DOOR NOTES:

Revision #:
3D Exterior Elevation Number Type Qty Width Height R/O Description 3D Exterior Elevation Number Type Qty Width Height R/O Description Door Schedule
3D Exterior Elevation Number Qty Width Height Description Floor

ENTRY 2ND FLOOR
W1-01 Mulled Unit 1 132 " 32 " 133"x33" W2-01 Fixed Glass 6 36 " 60 " 37"x61"
WINDOW FIXED
1 WOOD WINDOWS WITH CLAD EXTERIOR SEE 1. MAIN FLOOR DOORS SHALL BE 96";
D1-01 1 132 " 96 " Entry Door 1
ENERGY RATINGS SECOND FLOOR DOORS 80", UNO
Window Schedule, Attic
3D Exterior Elevation Number Type Qty Width Height R/O Description
2 INTERIOR WINDOW MATERIALS: STAINED 2. ALL DOORS SHALL BE SOLID CORE 1 3/4"

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

W1-02 Mulled Unit 1 144 " 72 " 145"x73" Mulled Unit-hr
WITH FACTORY FINISH, VERIFY WITH OWNER THICK, UNO
WA-01 Mulled Unit 1 112 " 22 " 113"x23" DORMER

3 WINDOW HARDWARE TO BE OWNER 3. INTERIOR DOORS SHALL BE STAINED -OR- D1-02 1 120 " 96 " ext. Triple Slider-Glass 1

SELECTED AT TIME OF ORDER PAINTED, VERIFY WITH OWNER

W1-03 Fixed Glass 1 36 " 72 " 37"x73" MBR

WA-02 Mulled Unit 1 94 " 22 " 95"x23" FALSE DORMER

4 WINDOW ROUGH OPENING: 1/2" FOR TOP/ 4. DOORS BETWEEN GARAGE AND LIVING
BOTTOM & 1/2" FOR SIDES, UNO BY MFG AREA SHALL BE 1 3/4" TIGHT FITTING SOLID
D1-03 1 120 " 80 " ext. Triple Slider-Glass 2

LOWER LIVING
5 SEE WINDOW SCHEDULE CALLOUT FOR CORE DOORS WITH A RATING OF 60
W1-04 Fixed Glass 3 42 " 80 " 43"x81"
WINDOWS

DOOR & WINDOW

WINDOWS THAT USE A WOOD OR STEEL BEAM MINUTES. DOOR SHALL BE SELF CLOSING
FOR THE HEADER 5. EXTERIOR EXIT DOORS SHALL BE 36" MIN.

SCHEDULES
W1-05 Fixed Glass 3 42 " 24 " 43"x25"
UPPER LIVING 6 BEDROOM WINDOWS SILL FINISHED MUST BE NET CLEAR DOOR WAY SHALL BE 32" MIN. D1-04 4 34 " 96 " Pocket-Door P03 1
WINDOWS

WITHIN 44: OF THE FLOOR AND PROVIDE DOOR SHALL BE OPENABLE FROM INSIDE
MINIMUM CLEAR OPENINGS OF 5.7 SQ. FEET 6. GARAGE DOORS TO BE SECTIONAL,
W1-06 Fixed Glass 1 24 " 72 " 25"x73" LIVING WITH HEIGHT DIMENSION NOT LESS THAN 24" OVERHEAD DOORS. IF GLASS, IT SHALL BE D1-05 1 30 " 88 " SHOWER DOOR - BEDROOM2 1

AND WIDTH DIMENSION NOT LESS THAN 20" - TEMPERED

HRC R310.1-R310.1.4 7. ALL GLAZING WITHIN 18 IN. OF THE FLOOR
W1-07 Mulled Unit 3 46 " 22 " 47"x23"
MBR CLOSET /
BEDROOMS
WINDOW FLASHING DETAIL AND/OR WITHIN 24 IN. OF ANY DOOR
D1-07 13 34 " 96 " Hinged-Door P03 1
(REGARDLESS OF WALL PLANE) ARE TO
HAVE SAFETY GLAZING
W1-08 Fixed Glass 2 22 " 22 " 23"x23" Fixed Glass 8. ALL TUB AND SHOWER ENCLOSURES ARE
TO BE GLAZED WITH SAFETY GLASS D1-09 2 36 " 96 " MBR / KITCHEN 1

MBR -
9. BARN DOORS, MEASURE TO FIT OPENING.
TEMPERED
W1-09 Fixed Glass 1 48 " 54 " 49"x55"
or POLY
GLASS BLOCK
ALL HARDWARE TO BE STAINLESS, UNO

1910 E GRANDVIEW DR.

GRANDVIEW
D1-10 1 60 " 80 " 4 Dr. Bifold-Panel 1

W1-10 Sngl Casement 1 22 " 48 " 23"x49" MBR

1 2 3 4

BASIC WINDOW FLASHING INSTALLATION*

D1-11 1 60 " 96 " Double Hinged-Door P03 1
BEDROOM4
W1-11 Sngl Casement 1 36 " 52 " 37"x53"
EGRESS
1) PREPARE ROUGH OPENING: CUT STND. "I-CUT" IN THE WRB. CUT (2) 45 SLITS AT TOP TO
CREATE FLAP. APPLY FLEXIBLE FLASHING AT SILL + 6" MIN. UP JAMBS. SECURE FLEXED EDGE OF
FLASHING WITH MECHANICAL FASTENERS.
BEDROOMS
W1-12 Dbl Casement 2 48 " 52 " 49"x52 3/4" D1-12 1 36 " 80 " ext. Hinged-Door E21 1
EGRESS
2) INSTALL WINDOW PER MANUFACTURER'S INSTRUCTIONS.

3) APPLY FLASHING TAPE AT JAMBS, EXTENDING 1" ABOVE AND BELOW WINDOW HEAD FLANGE
AND BOTTOM OF SILL FLASHING. APPLY FLASHING TAPE ALONG HEAD, EXTENDING BEYOND
W1-13 Fixed Glass 1 22 " 22 " 23"x23" CLOSET OUTER EDGES OF JAMB FLASHING.
D1-13 2 36 " 80 " Garage, Fire Rated Door 1
2016
4) REPLACE WRB FLAP AT HEAD AND TAPE REMAINING CUTS IN WRB

*REVISE INSTALLATION PROCESS ACCORDING TO WINDOW MANUFACTURER'S INSTRUCTIONS

W1-15 Hopper 2 30 " 22 " 31"x23" SHOWER

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
D1-14 1 72 " 80 " Garage 1

W1-16 Hopper 3 22 " 22 " 23"x23" TOILET AREA

D1-15 1 108 " 96 " Garage-Panel Garage Door 1

W1-17 Fixed Glass 1 36 " 72 " 37"x73" BEDROOM2

208.292.3400
D1-16 1 216 " 96 " Garage-Panel Garage Door 1
W1-18 Fixed Glass 1 54 " 72 " 55"x73" KITCHEN

GARAGE DOOR CASCADE SLIDING DOOR ENTRY DOOR UNIT INTERIOR DOOR BARN DOOR
NOT LISTED IN
W1-19 Mulled Unit 1 94 " 22 " 95"x23" GARAGE U-Factor - Rate of Heat Loss = 1/R SCHEDULE
SHGC - Solar Heat Gain Coefficient
VLT- Visible Light Transmittance QUANTITY (2)
WINDOW ENERGY RATINGS CR - Condensation Resistance RIGHT & LEFT
Low-E4 \High Altitude Windows U-Factor SHGC VLT CR
Casement/Hopper 0.39 0.3 0.49 52
Double Hung 0.35 0.27 0.46 49
Slide-By 0.37 0.28 0.48 49
Fixed \ Auxiliary 0.32 0.32 0.54 51
 103 1/2" 116"
71 1/2"
3/4" 3/4" 7 1/2" 3" 3"

SHEET NUMBER

15
24" 30" 30" 18" 40 1/2" 24" 41"
80" 24" 44 1/2"

Revision #:
9"
2 5/8"

33 5/8"

33 5/8"
42"
71 5/8"

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

107 5/8"

107 5/8"
107 5/8"

36"
36"

107 5/8"
1 1/2"

36"
16 1/2"
72"

6"

6"
4"

INTERIOR SECTIONS &

36"

32"
32"

32"

ELEVATIONS
1" 1" 36" 33" 41"
30" 18" 30" 24" 21" 58 1/2" 30" 41 1/2"
3" 3"
12" 76" 15 1/2" 18" 18" 16 1/2" 63 1/2" 15" 15" 23 1/2" 18"
16" 48" 16" CL CL
CL CL CL CL CL CL
80" 103 1/2" 116" 71 1/2"

JJ BATH ELEVATION I2 LAUNDRY ELEVATION BATH 2 ELEVATION I4 POWDER ROOM ELEVATION

I1 1/2"=1'
I3 1/2"=1'
1/2"=1' 1/2"=1'

177 1/2"
CL CL
28 1/2" 108" 41"

33"
24" 18" 93" 18" 24 1/2"
12

12"

12"
2 5/8"

14 1/8"
101 5/8"

51"
143 5/8"

1910 E GRANDVIEW DR.

GRANDVIEW
1 1/2"

72"
107 5/8"
13 1/2"

12
24"

2
42"

21 1/2"
35 1/2"

18"

12
4 7/8" 5"
21" 87" 48" 177 1/2"
5
69 3/8" 96 1/2"
DORMER OPENING CL
165 7/8"
78"

FIREPLACE WALL ELEVATION I7 MASTER BEDROOM ELEVATION 2016

I5 1/2"=1' 1/2"=1'

132" 127" 132"

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
11 5/8"
30" 71" 28 1/2" 11 5/8"

3/4"
3/4"
27 5/8"

12 1/2"
12 1/2"

38 5/8"

38 5/8"
161 3/4"

3/4"
3/4"

2"
3/4"

40"
40"

107 5/8"

107 5/8"
107 5/8"

107 5/8"

107 5/8"

107 5/8"
107 5/8"

52"

208.292.3400
68 1/4"

69"

40"
40"

30"

3/4" 68" 24" 35"

129 1/2" 35 1/4" 96" 12" 40 1/2" 24" 54 11/16"
13/16"
132" 127" 132"

OFFICE ELEVATION CLOSET 1 ELEVATION CLOSET 2 ELEVATION CLOSET 3 ELEVATION

I6 1/2"=1'
C1 C2 C3
1/2"=1' 1/2"=1' 1/2"=1'
 SHEET NUMBER

16
WP

Revision #:
R
GFCI

THERMO FOR
R
HEATED FLOOR.

SCALE @ 24" X 36"

REQUIRES

DATE: 2.20.2017

DRAWN BY: S.H.

C5/TV
DEDICATED CIRCUIT
GFCI
T

CD CW
GFCI
Dryer Washer
3
GFCI
GFCI
R

4'-6"
GFCI C5/TV
4 PLEX AT UPPER WALL CAB
WP
4
(2) OUTLETS COFFEE STATION G LIGHTS
30 AFF / 72 AFF
GFCI GFCI
DATA PANEL - NETWORK,
42" IRON STATION SECURITY, AUDIO, CABLE R R WALL CAB UNDERMOUNT
Tub-Shower C CL SP 4 3
HOME 2'-5 1/2" L GFCI GFCI
STRIP LIGHTS
5' 5'-6" 4'-6"

ELECTRICAL, DATA &

R

3'
GFCI
GFCI CL CL M
3 GFCI R4

OUTLET & CABLE

R R R R CL R R R

4'
72 AFF
C5/TV Freestanding Bath
4
WALL MOUNTED UNDER COUNTER
GFCI
R R R
R R CL SPEAKER STRIP LIGHTS
GFCI
GFCI

4'
G

1'-10 5/8"
R

AUDIO PLAN
R4 SP RA

Hood
4'
TO LIGHTS ABOVE CL R R

Range
R R CL GFCI
STAIRWAY R T
SP DW SP
R R CL H
2'-2 1/2"

GFCI

4'
(2) OUTLETS CL

1'-10 1/2"
A 42" IRON STATION
CL R R 30 AFF / 72 AFF GD

Sink
GFCI

4'
GFCI R R
CL R R CL R THERMO FOR
4'-6"

A HEATED FLOOR.
R R R
REQUIRES
CL CL R R CL DEDICATED CIRCUIT

4'
2'-2" 5'-2" 2' C5/TV 3 4 4 3 T
CL R R R

5'
HS SP R
3 GFCI

4'
GFCI

Ref
EP EP
GFCI ELEC. PANELS GFCI
33 3 3
GFCI R GFCI CL R R
400 AMP SERVICE SP
Ref. Optional: Water Softener
Sink
GFCI CL R
3'

Water Heater2 Water Heater1

R R CL 5'-2" 5'-4" 5'-2" 4'-4" 2'-10 3/4"

4'-10"
CL CL CL GFCI

WH

3'-8 3/8"
6'
R4
R CL R R R R R
CL

3'-4"
R R R R R
CL CL
6'-1 1/2" 4'-6" 4'-6" 4'-6" 4'-6" 3'-5 1/2"

G
4'-6"

8' 15' 10' GFCI

OUTLET & CABLE 3 4 3 CL CL CL CL 4 3 CL T

WH
72 AFF
CL
CL

1'-6 5/8"
R CL R 4 4
C5/TV

3'-5"
R4
C5/TVR SP
CL R R

Gas Heater
5'

3'-10 1/2"
USB
CL
GFCI OUTLET & CABLE 4
3
R CL R R R R R 4
Heat Pump 1

72 AFF

9'
C5/TV
4' 5' 5' 5' 5' 5' 4' R R
2'-6"

CL CL CL CL CL CL
CL
OUTLET & CABLE

1910 E GRANDVIEW DR.

72 AFF

3'-10 3/8"
DOORBELL
SP SP

GRANDVIEW
GFCI
C5/TV
GFCI

9'
Heat Pump 2

WP
R R G WP

CL WP R CL R R
C5E

1'-6"
1'-2" 1'-2"
6'-6 3/4" 6'-6 3/4"
CL CL CL
4
ELECTRICAL 4
METER USB CL

2'-4 1/2"
10'-5 1/2"
R R WP
SP

3
3

ELECTRICAL PLAN - 2ND FLOOR GFCI

ELECTRICAL PLAN - MAIN FLOOR
GFCI
3/16"=1' EV CHARGING
STATION 1/4"=1'
GFCI
50 AMP
WP Electrical
WP Schedule
2D Symbol Description

ELECTRICAL LEGEND
2016
LIGHTING

R4 R R RECESSED 4" & 6" CANS / WET RATED

NOTES:

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

PENDANTS / WALL LAMP / SCONCE

chiefarchitect.com
Recessed Down Light 6 HOME OWNER SHALL DO A WALK-THRU WITH RELEVANT INSTALLERS TO VERIFY THE EXACT LOCATION FOR OUTLETS, LIGHTS, SWITCHES, CABLE, DATA, PHONE, AUDIO,
UNDER CABINET LED PUCK / LED STRIP /
CEILING LED VACUUM, ETC.

FAN / FAN LIGHT. 200 CFM MIN. ELECTRICAL NOTES:

1. PROVIDE MIN. 400 AMP SERVICE TO MAIN PANEL
CEILING FAN W/ LIGHT Contemporary (3 lights) 2. ALL APPLIANCES & UTILITIES TO HAVE DEDICATED CIRCUITS. SEE MFG'S SPECS. FOR REQUIREMENTS
3. ELECTRICAL RECEPTACLES IN BATHROOMS, KITCHENS AND GARAGES SHALL BE G.F.C.I. PER NATIONAL ELECTRICAL CODE REQUIREMENTS
SWITCHES / OUTLETS 4. ALL BEDROOM OUTLETS AND LIGHTS BE ARCH FAULT PROTECTED
SWITCH / 3-WAY / 4-WAY 5. PROVIDE ONE SMOKE DETECTOR AND CARBON MONOXIDE DETECTOR IN EACH ROOM AND ONE IN EACH CORRIDOR ACCESSING BEDROOMS. CONNECT SMOKE
3 4

208.292.3400
Contemporary Pendant DETECTORS TO HOUSE POWER AND INTER-CONNECT SMOKE DETECTORS TO HOUSE POWER AND INTERCONNECT SO THAT, WHEN ANY ONE IS TRIPPED, THEY ALL WILL
USB GFCI WP
OUTLETS - USB 5V & 120V / 120V WALL & SOUND. PROVIDE BATTERY BACKUP FOR ALL UNITS.
CEILING
GFCI / WATER PROOF / 220V 6. CIRCUITS SHALL BE VERIFIED WITH HOME OWNER PRIOR TO WIRE INSTALLATION.
R
APPLIANCE SPECIFIC: REFRIGERATOR / 7. FINAL SWITCHES FOR TIMERS AND DIMMERS SHALL BE VERIFIED WITH HOME OWNER.
M DW GD
MICROWAVE / DISH WASTER / DISPOSAL 8. FIXTURES TO BE SELECTED BY HOME OWNER.
H CW CD RA Cylch Semi-Flush Mount
COOK HOOD / WASHER / DRYER / WALL 9. UNO - ALL SWITCHES TO BE 48" O/C ASF. OUTLETS TO BE 15" O/C ASF. OUTLETS OVER COUNTERTOPS TO BE 3" ABOVE COUNTER FROM BOTTOM. (ASF = ABOVE
OVEN SUBFLOOR)
10. ALL LIGHTING SHALL BE DIMABLE AND USE LED BULBS, UNO.
OTHER MEP
AUDIO:
C5 C5/TV
VAC

Duplex
HS

CAT5 / CAT5 & COAX RG6QS / CENTRAL VAC / 1. LOCATE SPEAKERS AND AUDIO CONTROLS AS INDICATED IN THE PLAN; RUN CIRCUIT OF SPEAKER WIRING TO AUDIO HOME PANEL SPECIFIED BY FLOOR;
HOME SECURITY PANEL 2. AUDIO SPEAKERS TO BE APPROVED BY HOME OWNER;
T G SMOKE DETECTOR / THERMOSTAT / GAS 3. LOCATE JACKS AS INDICATED IN THE PLAN; INSTALL DATA / CABLE PANEL SIMILAR TO "ON Q". SYSTEM TO BE APPROVED BY HOME OWNER.
CONNECTION / DOOR BELL
DATA / CABLE:
SP
SPEAKERS: CEILING MOUNTED. NOTE, USE Exhaust LOCATE SECURITY PANELS AS INDICATED IN THE PLAN; SYSTEM TO BE APPROVED BY HOME OWNER.
WALL CONTROLLED VOLUME SWITCH
 SHEET NUMBER

17 Revision #:
W C
W

H C
H C

W
H/W H/W

H/W
C/W C/W
w/W

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

w/W H/W
C/W
C/W C/W C/W C/W C/W
H/W H/W H/W H/W H / WW
w/W w/W w/W
H C

Dryer Washer

H C
W C

C/W

w/W
C/W
H/W

H/W
w/W
HOSE

W
BIBB

G C

Tub-Shower

PLUMBING & HVAC

w/W
C/W

C/W
H/W
w/W

H C

w/W

H C
C

G
H/W

W
C/W C/W
w/W w/W w/W C W
w/W w/W w/W
w/W w/W
W w/W W
C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W C/W Freestanding Bath
H/W H/WH C H/W H/W H/W H/W H/W H/W H/W H/W H/W H/W H/W

H C
C W

H C
w/W

C/W

C/W

C/W

W
w/W

C/W

w/W
H/W

H/W

C // W
G
G G G G G G G G G

G
G
W

H
C/W C/W C/W
H/W H/W H/W

Hood

H C
DW

Range

PLAN
C
W

C/W

C/W

C/W

C/W

w/W
H/W

H/W

C // W

H/W
G

H
w/W w/W w/W w/W w/W w/W w/W w/W w/W w/W w/W w/W

Sink
H
W

H C
w/W

C/W

C/W

C/W

w/W
H/W

H/W
ALL VENTS NEAR

G
CABINETS INSTALLED IN
W
TOE KICK
H/W
H C C/W
W

Ref

C
C

H
Ref. Optional: Water Softener
Sink

C
C/W

w/W

C/W
H/W
Water Heater2 Water Heater1

G
WH
G
G

WH
w/W

C/W
G
C/W

Gas Heater
w/W

C/W

C/W
G

1910 E GRANDVIEW DR.

Heat Pump 1

GRANDVIEW
C
HOSE
BIBB

w/W

C/W
G
Heat Pump 2

w/W

C/W
G
G

w/W

C/W
G
HVAC & PLUMBING PLAN - 2ND FLOOR

w/W

C/W
G
3/16"=1'
G G G G G

HVAC & PLUMBING PLAN - MAIN FLOOR 2016

1/4"=1'

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
GENERAL PLUMBING & HVAC NOTES:
1. HVAC SHALL HAVE TWO ZONES, ONE FOR EACH FLOOR.
2. INSULATE HEATING TRUNK AND BRANCH SUPPLY DUCTS IN UNFINISHED AREAS, CRAWL SPACES, ATTICS GARAGES, ETC
3. ALL DUCTING SHALL BE THRU FLOOR JOISTS WHERE POSSIBLE
4. ENCLOSED ATTICS AND SPACES BETWEEN RAFTERS SHALL HAVE CLEAR CROSS VENTILATION AREA TO THE OUTSIDE VENTS. 1/150 OF SPACE VENTILATED FOR GABLE VENTS. 1/3000 OF SPACE VENTILATED FOR BOTH
GABLE AND EAVE VENTS.
5. DRYER, WATER HEATER, KITCHEN AND BATHROOM VENTING SHALL EXHAUST TO THE OUTSIDE OF THE BUILDING AND BE EQUIPPED WITH A BACK DRAFT DAMPER.VENT DRYER VENT, MAX. LENGTH OF DUCT 14 WITH

208.292.3400
TWO 90 DEGREE ANGLES.
6. PROVIDE 30 CLEARANCE FROM RANGE TOP TO COMBUSTIBLE MATERIALS. FOR EXCEPTIONS, SEE INT. MECHANICAL CODE. SIDE CLEARANCE SHALL BE AS SPECIFIED BY PERMANENT MARKING ON THE UNIT. IRC
M1901.1
7. WATER CLOSETS TO HAVE A FLOW RATE OF 1.6 GALLONS OR LESS PER FLUSH. IRC P2903.2
8. SHOWER HEADS TO HAVE FLOW RATE OF 2.5 GALLONS PER MINUTE OR LESS. IRC P2903.2
9. TUBS/SHOWERS SHALL BE PROVIDED WITH INDIVIDUAL CONTROL VALVES OF THE PRESSURE BALANCE OR THE THERMOSTATIC MIXING TYPE. THE WATER TEMPERATURE SHALL BE AT A MAXIMUM OF 120*F.
10. INSTALL WATERPROOF GYPSUM BOARD AT ALL WATER SPLASH AREAS TO MINIMUM 84" ABOVE SHOWER DRAINS.
11. OPTIONAL WATER SOFTENER UNIT, IF INSTALLED, SHALL CONDITION WATER BEFORE ENTERING THE WATER HEATERS AND THE COLD WATER SOURCE. WATER TO REFRIGERATOR, KITCHEN AND BATH SINKS SHALL
NOT HAVE SOFTWATER.
12. EACH HOSE BIBB SHALL BE EQUIPPED WITH A BACK FLOW PREVENTION DEVICE.
13. ALL GAS LINES SHALL BE SIZED FOR APPLIANCE LOAD. "BLACK" PIPE SHALL BE USED INSIDE THE BUILDING, "GREEN" PIPE WHERE UNDERGROUND OR EXPOSED TO WEATHER. ALL JOINTS SHALL BE TAPED WHERE
BURIED OR EXPOSED TO WEATHER.
14. INSULATE WASTE LINES FOR SOUND CONTROL.
15. INSTALL CENTRAL VACUUM SYSTEM & PIPING; CONFIRM BRAND WITH HOMEOWNER.
 214"

SHEET NUMBER

18
1 7/8" 6 1/2" 5 7/8"
136 1/2" 36" 27 1/4"

Revision #:
9"

62 5/8"

SCALE @ 24" X 36"

DATE: 2.20.2017

DRAWN BY: S.H.

107 5/8"

107 5/8"
98 5/8"

11"

PLAN & ELEVATIONS

34"

MASTER BATH
33" 41" 14" 41" 36" 21" 18"
7 1/2" 1" 1 1/2"
136 1/2" 19" 58 1/2"
CL
136 1/2" 77 1/2"

BATH SINK ELEVATION

M1 1/2"=1'

111 1/2"
2"
52 1/2" 21" 36"

MASTER BATH RENDER

62 5/8"
193" 84" FOR ILLUSTRATION ONLY NO SCALE
61" 86 1/2" 36 1/2" 84"
LC

1910 E GRANDVIEW DR.

W
36

20 3/8" 35 1/4" 26 1/4" 53 1/4" 25 3/4" 27 1/4" 27 3/4" 51 1/4" 16 3/8"

107 5/8"

GRANDVIEW
51

BRITTANICCA
24

MASTER BATH NOTES

R

11"
5 2 1. VANITY SINK. MIRROR W/
W3051

24"

Bench

1 1/2"
33"

Freestanding Bath INTEGRATED LED LIGHT.

51 5/8"

28 1/2"
CL
18"
CL
18 1/2" 2. ELONGATED COMFORT HEIGHT
TOILET; VENT ALONG SHOWER
3
36"

4 WALL

4"
102"

Half Wall 42"H 3. FREESTANDING TUB W/ FILLER

M2
41"

52 1/2" 21" 36"

w/ Glass on Top 1" 1"
CLOSET
18 3/8"

CL 4. SHOWER BENCH. RADIUS = 52 1/2" 40" 19"

M4 93 SQ FT 18.25"; FABRICATOR TO VERIFY 111 1/2"

CL
1"

SHOWER 5. SHELF
BATH SINK ELEVATION
1 1/2"

MASTER BATH M3
8 1/2"

44 SQ FT 7 6. OPEN SHOWER, CURBLESS;

32"

ANGLE
139 SQ FT
SLOPE FLOOR TO DRAIN
ASHWOOD 1/2"=1' 2016
3 C 1
W3051

5 6
7. IRON STATION
52 1/2"

102"
CL CL 193"
2
41"
19 1/2"

1 42" 36" 24"

65 5/8"
3/8"
86"
4 1/2"
36 1/2"

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

chiefarchitect.com
SB 36

CL

24"

24"
3"
W482124

64"

M3
SB 36 BF

47 5/8"

47 5/8"
3DB212134
44 1/2"

CL CL
19"

PANTRY

66"
CL

34 5/8"

34 5/8"
BF

Cabinet Schedule, Master

3D Elevation Number Qty Width Depth Height Description
107 5/8"

107 5/8"

107 5/8"
25 1/2"
12"

12"
77 1/2"

208.292.3400
M1
3DB212134

CL CL
M01 1 18 " 21 " 34 " base cabinet
58 1/2"

9"

9"

1/2"
CL CL
48"

30 1/2"
1DB182134

48"

38 7/8"
9' CEILING

42"
40"

40"
M02 2 21 " 21 " 34 " base cabinet
BF

1/2"
17"
41" 52 1/2"
3"
96 1/2" M03 2 36 " 21 " 34 " Sink Base 8" 37 1/2" 15" 37 1/4" 43 1/4" 18" 18 1/2"
42" 36" 24" C 6" CL CL CL
CL CL 1/2" L
102" 61" 86 1/2" 36 1/2"
193"

TREY
MASTER BATH CEILING
/ CLOSET 8:12 PLAN
FLOOR SHOWER ELEVATION TUB ELEVATION
1/2"=1'
M4 1/2"=1'
M2 1/2"=1'
10' CEILING
 190" 96"
1 1/2"

SHEET NUMBER

19
1 1/2" 1"
24" 30" 54" 30" 48" 30" 30" 36"
240"
CL

Revision #:
189" 51"

2 5/8"
2 5/8"

2 5/8"
15" 43" 16 7/8" 59 1/4" 105 7/8"

21"
LC

51"

51"
W
W306915 W3051

36
25"

SCALE @ 24" X 36"

51
LS

DATE: 2.20.2017

DRAWN BY: S.H.

30"
24
B30 MW-1DB30 MASTER BATH NOTES

B3

R
MW

1 1/2"
R

107 5/8"

107 5/8"

107 5/8"
1 1/2"
5 1. VANITY SINK. MIRROR W/

W3051

81 1/16"
K2

16 1/2"
16 1/2"
Bench
KITCHEN

18"
Freestanding Bath INTEGRATED LED LIGHT.

36"

B21L

1 1/2"
2. ELONGATED COMFORT HEIGHT

1 1/2"
62" TOILET; VENT ALONG SHOWER
K5

30 1/2"
K1

34 1/2"
4 WALL

36"
3DB21
Half Wall 42"H 3. FREESTANDING TUB W/ FILLER

KITCHEN PLAN &

Hood
B4212
CL w/ Glass on Top
K3 4. SHOWER BENCH. RADIUS =

4"
RADIUS 146.5"

Range
M4

ELEVATIONS
18.25"; FABRICATOR TO VERIFY30"

DW

190"
1 1/2" 1" 30" 36"
36" 21" 48" 33" 48"
1 1/2"
66
ft
SHOWER 81 1/16" 82 7/16" 26 1/2"
5. SHELF 45" 51"
5.
50 SQ FT MASTER BATH CL
190"
CL
6. OPEN SHOWER, CURBLESS; 96"
CL

WORK TRIANGLE

SLOPE FLOOR TO DRAIN

3DB33
3 C 1

W3051
6.53 ft

82 7/16"
B3912
5 6 MAIN WALL ELEVATION
K2 WALL ELEVATION

125"
Sink
K4 K1 7. IRON STATION

SB 36
1/2"=1' 2 1/2"=1'
5.2 CL CL CL CL
4f
t 62 3/4" 33 1/2" 33 1/2" 33 1/2" 74 7/8" Cabinet Schedule, Kitchen
Elevation # Label Qty Width Depth Height Description

PO21

W482124

59 1/2"
B4212

K01 3DB21 1 21 " 24 " 36 " base cabinet

37 5/8"
CL

3DB212134
FHB21L
PANTRY

26 1/2"
Ref
61"
K02 3DB33 1 33 " 24 " 36 " base cabinet

14" 11" 37" 53 3/4" 24"

107 5/8"
9' CEILING 41" 38 1/2"

34"
K03 B21L 1 21 " 24 " 36 " base cabinet

52 1/2"
52"

1910 E GRANDVIEW DR.

GRANDVIEW
1 1/2"
9' CEILING K04 B30 1 30 " 24 " 36 " base cabinet

34 1/2"
36"
KITCHEN FLOOR PLAN
K05 B3912 1 39 " 12 " 36 " base cabinet
1/2"=1' VAULTED CEILING 5:12
21" 21" 36" 24" 21" 37" 25"

60" 30" 95"

CL CL
TREY CEILING 8:12 53" 123" 62" K06 B4212 2 42 " 12 " 36 " base cabinet
DORMER OPENING ISLAND ELEVATION
10' CEILING K3 1/2"=1'
K07 FHB21L 1 21 " 24 " 36 " base cabinet

K08 LCW365124R 1 36 " 24 " 51 " corner wall cabinet 2016

36"

6500 N. Mineral Dr. Coeur d'Alene, ID. 83815

K09 LSB36R 1 36 " 36 " 36 " corner base cabinet

chiefarchitect.com
24" 12"

LING 3:12
K10 MW-1DB30 1 30 " 24 " 36 " Micro
K4 ISLAND ELEVATION K5
TTOM 1/2"=1'

KITCHEN & CABINET NOTES: K11 PO21 1 21 " 24 " 36 " base cabinet

1 ALL CABINETS FRAMELESS, MAPLE OR ALDER

208.292.3400
2 CONFIRM FINISH & STAIN/PAINT WITH CLIENT PRIOR TO ORDERING
3 CONFIRM DOOR & DRAWER STYLES WITH CLIENT PRIOR TO ORDERING 34 1/2
K12 SB 36 1 36 " 24 " Apron Sink Base
4 INSTALL HARDWARE ON SITE "

5 INSTALL CROWN MOLDING ON SITE; CONFIRM PROFILE AND DIMENSION WITH HOME OWNER
6 CABINET SUPPLIER RESPONSIBLE FOR FINAL MEASUREMENTS & CABINET OPENINGS FOR APPLIANCES
SPECIFICATIONS K13 W3051 3 30 " 12 " 51 " wall cabinet
7 ALL APPLIANCES TO BE ON DEDICATED CIRCUITS, UNO. REFER TO APPLIANCE SPECIFICATIONS FOR AMP/
VOLTAGE REQUIREMENTS
8 USE MIN 6" DUCT FOR HOOD. CONFIRM HOOD IS 500 CFM MIN.
9 CONFIRM FINAL MATERIALS FOR BACKSPLASH AND COUNTERTOP WITH CLIENT PRIOR TO ORDERING K14 W306915 1 30 " 15 " 69 " wall cabinet
10 ALL DRAWERS TO BE TONGUE & GROOVE; GLIDES TO BE SOFT CLOSE
11 LED STRIP LIGHTS FOR WALL CABINETS AND UNDER ISLAND
12 COUNTER FABRICATION: CONFIRM ALL FIXTURE MEASUREMENTS AND CENTERLINES
KITCHEN RENDERING K15 W482124 1 48 " 24 " 21 " wall cabinet

FOR ILLUSTRATION ONLY NO SCALE