Scribd
Upload
32 views

2.2.11 Wall Mounting (KX-TDA200) : Caution

This section provides instructions for wall mounting the KX-TDA200 hybrid IP-PBX. It cautions that the wall must be able to support at least 4 times the shelf's weight. It also notes the shelf openings must remain unblocked and the surface behind the shelf must be flat, free of obstacles, and not made of wood. The steps explain installing 4 anchor plugs in the wall using the metal bracket as a template to then fix the bracket with 4 screws.

Uploaded by

NguyenDinhLy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

2.2.11 Wall Mounting (KX-TDA200) : Caution

This section provides instructions for wall mounting the KX-TDA200 hybrid IP-PBX. It cautions that the wall must be able to support at least 4 times the shelf's weight. It also notes the shelf openings must remain unblocked and the surface behind the shelf must be flat, free of obstacles, and not made of wood. The steps explain installing 4 anchor plugs in the wall using the metal bracket as a template to then fix the bracket with 4 screws.

Uploaded by

NguyenDinhLy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2.

2 Installation of the Hybrid IP-PBX

2.2.11 Wall Mounting (KX-TDA200)


CAUTION
Make sure that the wall the shelf will be attached to is capable of supporting at least 4 times the
weight of the shelf.
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or
metal plates in the wall.

Notes
Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides
of the shelf.
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on
the back of the shelf will not be blocked.
Make sure that the surface behind the shelf is not made of wood.
Be careful not to drop the shelf.

1. Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4
screws (A).

Anchor Plug Wall Hammer Anchor Plug


Metal Bracket
8 mm

30 mm

Screw (A)

Screw (A)

Metal Bracket

Installation Manual 65

You might also like