Scribd
Upload
114 views

UTL STM 1 Stanalone

The UTL-STM1 is telecommunication backbone equipment that can carry up to 155Mbps of data on a single fiber. It has interfaces for E1, E3, DS3, and Ethernet and can be configured for short or long haul connections. It supports protocols like TCP/IP and SNMP for network management and performance monitoring through a central Network Management station.

Uploaded by

toseru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
114 views

UTL STM 1 Stanalone

The UTL-STM1 is telecommunication backbone equipment that can carry up to 155Mbps of data on a single fiber. It has interfaces for E1, E3, DS3, and Ethernet and can be configured for short or long haul connections. It supports protocols like TCP/IP and SNMP for network management and performance monitoring through a central Network Management station.

Uploaded by

toseru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UTL-STM1

STM 1 Stand alone STM1 Interfaces


E1 interface Card
21 E1 ports
Compliant to ITU T G703
E3/ds3 Interface card
1 E3 port
Field configurable as E3/DS3
Ethernet Interface card
10/100 base Ports
Optional 10/100 FDDI ports
Other Interfaces
Serial Management Port.
JTAG/BDM Port.
LED status indication
The UTL STM1 is Telecommunication backbone
Clock options
equipment carrying upto 155Mbps data on a single fiber. It Internal
is typically deployed between two stations having External G703
transport capability of applications such as Synchronous Recovered Clock from Aggregate
Transport Services (SDH/SONET), LAN Services and Recovered clock from Tributaries
Voice, Video Services. It can be configured as short haul External 2 MHZ
or long haul based on the customer requirement . Order wire
The system supports standard protocols like TCP/IP, E1
SNMP for network management. Performance, E2
configuration and fault management is done by means of a Sub System Cards
central Network Management station Aggregate card (STM1/4 optical transceivers).
Features Cross Connect Card.
As per ITU T G783 & G707 stds
E1 mapper card.
Optical interface : Short haul / Long Haul.
E3 mapper card.
Interfaces : E1/ E3 /DS3 & 10/100mbps FE
Ethernet mapper card.
Network Interfaces : Electrical & Optical
Orderwire Card.
Terminal mux configurable as ADM
Clock Card.
Built in VC-12, VC-3 & VC-4 X connections.
Control Card with network processor
Fully redundant system
Protocol
Protection for Fibre
Full featured TCP/IP stack
Centralized SNMP - NMS for FCAPS management. SNMP Version 2
AMX RTOS
Order wire for system maintenance.
Upgrade utility
Online software upgrade utility.
Management Console
Extracted F1,F2 & DCC for external interface Supports Configuration,Performance
Power & Fault statistics
-48V DC. Runs on Windows NT
Physical Size : 19 std Subrack
United Telecoms limited
18A/19, Doddanekundi Industrial Area, Mahadevapura Post Bangalore 560048
Ph : 8524032 / 8524088 /30620439 Fax : 8524073 www.utlindia.com

You might also like