MODULE HM 1

Geometry preparation & Meshing Techniques using HYPERMESH

Geometry Preparation of auto & aero systems using Hypermesh

Geometry preparation for the Fender of a car
Geometry Clean-up for the Center Pillar of a car
Geometry preparation for the wing-panel of an aircraft
2D Meshing Techniques for auto & aero systems using Hypermesh
Meshing of BIW parts (auto & aero) using automeshing techniques
Meshing auto & aero components for crash and durability analyses
3D Meshing Techniques for Industrial systems using Hypermesh
3D Meshing Structured meshing (Brick/Hex) & Un-structured meshing (Tetra)
3D Mesh generation for Industrial systems
Assignments & Evaluation on Geometry & meshing
Project on Geometry & meshing of Auto, Aero or Industrial systems

MODULE HM 2
Structural Simulations using RADIOSS (NASTRAN)

Structural analysis of Aero & Automotive systems

Industrial Approach to Design & Validation
Introduction to FEA & CAE Work flow
Introduction to Strength of materials
Linear Static Analysis Theory & Practice
Design validation of an automotive gear-shaft using structural analysis
Identify the failure mode and re-design a engine-mount using linear static analysis
Design a connecting-rod for strength using stress analysis
Results processing using HYPERVIEW
Results Interpretation & Documentation
Industry-oriented Project on Linear Static Analysis of Auto, Aero or Industrial systems
 MODULE HM 3
Advanced Geometry & Meshing Techniques using HYPERMESH

Meshing Techniques for plastic parts using Hypermesh

Mid-surface extraction and meshing of plastic components
Mid-surface extraction and meshing of BIW, sheet-metal components like chassis
etc.
2D-Midsurface meshing a door trim with doghouse joints
Midsurface meshing for chassis frame.
2D meshing generation of automotive & aerospace systems
Mesh Generation Techniques for Stress / Durability Analysis
Mesh Generation Techniques for Crash Analysis
Project on assembly meshing of auto, aero or Industrial systems

MODULE HM 4
Thermal & Dynamic Analysis using RADIOSS (NASTRAN)

Introduction to Normal modes of vibration

Solution methodology-Eigenvalue & eigen vector, lanczos method
Normal modes Analysis of mini racing-car frame
Vibration Analysis of a rotor.
Natural Frequency estimation of a Truss bridge
Modal Analysis of a brake Disc.
Introduction to Thermal analysis
Thermal Analysis Conduction Heat-transfer in a friction-ring
Thermal-mapping of a friction-ring
Project on Dynamic & Thermal Analysis
 MODULE HM 5
Assembly Modeling & Meshing using HYPERMESH

Introduction to solid editing

Creating mappable solids for 3D meshing
3D hexa meshing techniques- sphere, T pipe, Block with cuts
3D hexa meshing of door hinge bracket
3D hexa meshing of a control arm
Brick meshing of Solenoid body
Introduction to 1D elements, types, applications-BAR, BEAM, ROD
1D meshing of SAE baja frame
1D elements advanced-RBE2, RBE3, applications
Using 1D elements for connections, bolts,welds
Types of connections in assemblies
Assembly meshing of an wing box with shear clips using bolts
Spot weld generation using connector tool.
Seam weld generation for a chassis frame using connector tool.
Introduction to CFD meshing
CFD meshing of exhaust manifold
Exporting the case file for ABAQUS, LS-Dyna, FLUENT Solvers
Project on Assembly Meshing
 MODULE HM 6
Buckling & Non-linear Contact Analysis using RADIOSS (NASTRAN)

Introduction to Non-Linear Analysis

Solution methodologies for non-linear analysis
Types of non-linearities
Non-linear Contact analysis
Analysis of Aircraft wing-box using gap elements
Modeling contact pairs for a typical 3D bolted joint
Non-Linear contact analysis for a chassis-subframe
Introduction to buckling analysis
Analytical solutions of buckling of coloumns
Preventing the Collapse of a Piping system using Linear buckling analysis
Project on Non-linear Analysis

MODULE HM 7
Meshing & Analysis using ANSYS Workbench

Introduction to Ansys Workbench

Importing Geometry,CAD,GUI
Modelling
Geometry preparation for the Fender of a car
Introduction to Design modeller
2D modelling Plane, sketching, modify, dimensions, constraints.
3D modelling Extrude, sweep, revolve, loft/skin
Geometry Cleanup Using Design Modeller
Geometry preparation for the Fender of a car
Body operations,Slicing Operations,Boolean operations
Edge connections, face merge, face split, surface patch, surface flip, projections
Repair tools, Freeze & Unfreeze
Midsurface Extraction AND EDITING USING DESIGN MODELLER
3D Meshing
Linking mechanical module to geometry
Global mesh contols, Local mesh controls
Tetra meshing of solenoid & element shape checking
Sweep meshing,multizone meshing & mapped face meshing controls
Linear Static ANALYSIS OF IMPELLER ASSEMBLY
Applying loads & Boundary conditions
Using Coordinate systems
Running Analysis
Post Processing
Normal Mode Analysis Of Machine Frame
Introduction of normal mode analysis
Solution process for normal mode analysis
Analysis settings & solving
Extracting various modes of vibrations

MODULE HM 8
Industry orientation & Internship Program

3D Modeling Techniques
Meshing & Analysis as per industry requirements
Meshing for durability, crash & CFD solvers
Interview preparation Technical Aptitude & General Aptitude Tests
Tool tests
Training on Job orientation skills
Projects based on Industry Requirements
advantages

Experienced Instructors j Industry Recognised Certification j Project based Training j Regular

assignments & assessments j Domain Based (auto, aero) curriculum j Cloud-based online learning
materials All our courses are designed by a team of highly experienced professionals from the
Industry

This course will provide the Advanced skills & special-techniques on Industry-oriented meshing and
analysis, needed to become a successful Analysis Engineer. This course has eight modules: HM1
Geometry preparation & Meshing Techniques using HYPERMESH HM2 Structural Simulations using
RADIOSS (NASTRAN) HM3 Advanced Geometry & Meshing Techniques using HYPERMESH HM4
Thermal & Dynamic Analysis using RADIOSS (NASTRAN) HM5 Assembly Modeling & Meshing using
HYPERMESH Master Diploma + Internship in Hypermesh & Radioss (Nastran) Internship with Job-
orientation and Interview preparation. Develops Industry-oriented skills on Meshing, Structural,
Dynamic and Non-linear simulations. Classroom based training with practical coverage on Theory,
FEM & SOM TECHZILON ADVANTAGES ABOUT THIS COURSE > > Classroom - Weekdays Master
Diploma + Internship in Hypermesh & Radioss (Nastran) 9/30/2017 Hypermesh Job Oriented Master
Diploma + Internship for Freshers | Techzilon https://www.techzilon.com/course/02-best-cae-
authorised-training-institute-bangalore-fea-som-fem-stress-structural-analysis-offline-classroom-
we 2/3 RELATED COURSES HM6 Buckling & Non-linear Contact Analysis using RADIOSS
(NASTRAN) HM7 & HM8 Industry orientation & Internship Program FREE Module: Value Addition
Module Meshing & Analysis using ANSYS Workbench This course covers: j Geometry preparation
using HYPERMESH & ANSYS j Meshing generation techniques j Structural Analysis using RADIOSS
(NASTRAN) & ANSYS j Post-processing using HYPERVIEW & ANSYS j Special-techniques used for
Meshing thin-shell structures like plastics, BIW, sheet-metals etc. j Modal and thermal analysis of
structures using RADIOSS j Assembly-meshing of multiple components j Buckling analysis of
structures j Non-linear Contact analysis j 3D modeling j FE modeling as per industry standards j
Interview preparation j Jobs-skills training

Course feteures

Classroom sessions : 60 Hours Practical sessions : 200 Hours Online tests : Topic-wise Industry
Oriented Project : 60 Hours Special sessions for Interview Preparation

About hypermesh and radiosis

HYPERMESH is special-purpose software used to build FE models for Structural Analysis. RADIOSS is
the leading solver generating file-decks similar to NASTRAN. Leading companies like Mercedes Benz,
General Motors, Caterpillar, Tata Motors, Honda, Boeing, Goodrich Aerospace, Airbus, Mahindra,
Nissan etc. use HYPERMESH & RADIOSS

Benfits

On successful completion of this course, you will be able to Build FE models as per industry
requirements, Perform various analysis & Develop Job skills.You will also learn the following: j
Fundamentals of Finite Element Methods (FEM) j Overview of Structural Analysis j How to Import
and align the geometry j Prepare the geometry for FE modelling j Create & modify various
geometric-entities j Create & edit different types of FEM entities like nodes, elements etc. j Generate
shell-mesh with 2D elements j Generate solid-mesh with 3D elements j Build Hybrid FE models using
2D & 3D elements Master Diploma + Internship in Hypermesh & Radioss (Nastran) Internship with
Job-orientation and Interview preparation. Develops Industry-oriented skills on Meshing, Structural,
Dynamic and Non-linear simulations. Classroom based training with practical coverage on Theory,
FEM & SOM TECHZILON ADVANTAGES ABOUT THIS COURSE COURSE REVIEW COURSE FEATURES
ABOUT HYPERMESH & RADIOSS COURSE BENEFITS > > Classroom - Weekdays Master Diploma +
Internship in Hypermesh & Radioss (Nastran) 9/30/2017 Hypermesh Job Oriented Master Diploma +
Internship for Freshers | Techzilon https://www.techzilon.com/course/02-best-cae-authorised-
training-institute-bangalore-fea-som-fem-stress-structural-analysis-offline-classroom-we 2/3
RELATED COURSES j Ensure mesh-quality j Theoretical & Practical overview of Structural Analysis j
Perform Static Analysis of Structural Systems j Accomplish domain-based projects on Meshing &
Analysis j FE modeling of Sheet-metals, BIW, Plastic components etc. j The solutions to the problems
faced during mid-surface extraction j Mid-surface meshing of components from different domains j
Establish the natural-frequencies & vibration-modes of structures j Perform Thermal analsysis j
Simulation of Advanced Structural Behaviour j Non-linear beheaviour of structures j Contact Non-
linearities j Understand the types of contacts j Perform contact simulations j Perform Buckling
analysis j Accomplish domain-based project on assembly meshing & non-linear analysis j Industry
orientation j 3D Modeling Techniques j Meshing for durability, crash & CFD solvers j Interview
preparation j Tool tests j Job-skills training

For hom

j Students & Fresh graduates (BE/ME in Mech, Aero, Auto) seeking an entry into the design field j
CAD engineers who wish to upgrade to Analysis-field and move ahead in their career j Team Leads
and managers who want to add Analysis-projects into their portfolio j This course does NOT need
prior knowledge of any CAD software j Pre-requisite: Nil