0% found this document useful (0 votes)

196 views

C600 User Manual.

This document is a user guide for the Smart Video Phone Fanvil C600. It begins with an introduction to the phone's components and functions. It then provides instructions on using the phone's contact list, call features, network settings, and other settings. Safety notices are also included at the beginning regarding proper use of the phone and power supply.

Uploaded by

Vikass_24

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

196 views

C600 User Manual.

Uploaded by

Vikass_24

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 93

Smart Video Phone Fanvil C600 User

Guide

Corporate Headquarters
Fanvil Technology Co., Ltd
Address: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District,
Bao'An, Shenzhen, 518101 P.R. China
Web Site: www. Fanvil.com
Tel: +86 755 26402199
Fax: +86 755 26402618

Fanvil Technology Co., Ltd

HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737

Safety Notices
Please read the following safety notices before installing or using this phone. They are
crucial for the safe and reliable operation of the device.
z Please use the external power supply that is included in the package. Other power
supplies may cause damage to the phone, affect the behavior or induce noise.
z Before using the external power supply in the package, please check with home power
voltage. Inaccurate power voltage may cause fire and damage.
z Please do not damage the power cord. If power cord or plug is impaired, do not use it, it
may cause fire or electric shock.
z The plug-socket combination must be accessible at all times because it serves as the
main disconnecting device.
z Do not drop, knock or shake it. Rough handling can break internal circuit boards.
z Do not install the device in places where there is direct sunlight. Also do not put the
device on carpets or cushions, it may cause fire or breakdown.
z Avoid exposure the phone to high temperature, below 0 or high humidity. Avoid
wetting the unit with any liquid.
z Do not attempt to open it. Non-expert handling of the device could damage it. Consult
your authorized dealer for help, or else it may cause fire, electric shock and breakdown.
z Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it
with a soft cloth that has been slightly dampened in a mild soap and water solution.
z When lightning, do not touch power plug or phone line, it may cause an electric shock.
z Do not install this phone in an ill-ventilated place.
z You are in a situation that could cause bodily injury. Before you work on any equipment,
be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.

Fanvil Technology Co., Ltd

Contents
Contents ..................................................................................................................................................................... 1
Introduction ............................................................................................................................................................... 1
Smart Video Phone Fanvil C600 Overview ....................................................................................................... 1
With Attachment ................................................................................................................................................ 1
Phone component descriptions .......................................................................................................................... 2
Interface introduction......................................................................................................................................... 4
Touch Screen Description .................................................................................................................................. 7
Status Bar ........................................................................................................................................................... 9
Functional applications: ....................................................................................................................................11
Update of the phone ......................................................................................................................................... 12
Dsskey ..................................................................................................................................................................... 14
Contacts ................................................................................................................................................................... 18
Add new local contact ..................................................................................................................................... 18
Add account ..................................................................................................................................................... 19
Creat group ...................................................................................................................................................... 20
Favorite ............................................................................................................................................................ 20
Network Phonebook ........................................................................................................................................ 21
BlockList & CallBarring.................................................................................................................................. 22
Phone Settings ......................................................................................................................................................... 23
System info ...................................................................................................................................................... 23
Network ........................................................................................................................................................... 24
Network ................................................................................................................................................... 24
PPPoE ...................................................................................................................................................... 26
QoS .......................................................................................................................................................... 27
Port........................................................................................................................................................... 30
STUN ....................................................................................................................................................... 31
802.1x ...................................................................................................................................................... 32
Accounts .......................................................................................................................................................... 32
Account.................................................................................................................................................... 32
Global ...................................................................................................................................................... 38
Call .................................................................................................................................................................. 38
General..................................................................................................................................................... 39
DND......................................................................................................................................................... 43
Dial plan .................................................................................................................................................. 44
Account.................................................................................................................................................... 47

Fanvil Technology Co., Ltd

Display ............................................................................................................................................................. 49
Tone ................................................................................................................................................................. 51
Time&date ....................................................................................................................................................... 51
Maintain ........................................................................................................................................................... 52
Service port .............................................................................................................................................. 53
CWMP set ................................................................................................................................................ 54
Backup ..................................................................................................................................................... 56
Phone Reset ............................................................................................................................................. 56
Update...................................................................................................................................................... 57
OTA System Update ................................................................................................................................ 58
Audio ............................................................................................................................................................... 59
Audio ....................................................................................................................................................... 59
Audio param ............................................................................................................................................ 60
Video................................................................................................................................................................ 61
Video param ............................................................................................................................................. 61
Bandwidth ................................................................................................................................................ 62
Softkey ............................................................................................................................................................. 64
MCAST ........................................................................................................................................................... 65
Reboot.............................................................................................................................................................. 66
Call Service.............................................................................................................................................................. 66
Register ............................................................................................................................................................ 66
Outgoing & Incoming call ............................................................................................................................... 67
Video Call ........................................................................................................................................................ 68
Blind Transfer .................................................................................................................................................. 70
Semi-attended Transfer .................................................................................................................................... 71
Attended Transfer ............................................................................................................................................ 71
Conference Call ............................................................................................................................................... 72
Call Hold.......................................................................................................................................................... 73
Call record ....................................................................................................................................................... 74
To Ring Page.................................................................................................................................................... 74
Android Settings ...................................................................................................................................................... 75
Ethernet configuration ..................................................................................................................................... 75
Security ............................................................................................................................................................ 76
Language&Input .............................................................................................................................................. 77
Web Settings ............................................................................................................................................................ 77
Logon ............................................................................................................................................................... 77
Network ........................................................................................................................................................... 78
QoS & VLAN .......................................................................................................................................... 78

Fanvil Technology Co., Ltd

Service Port.............................................................................................................................................. 81
Registration ...................................................................................................................................................... 82
Dial Plan .......................................................................................................................................................... 84
Basic Settings........................................................................................................................................... 84
Dial Plan Add........................................................................................................................................... 85
Security ............................................................................................................................................................ 88

Fanvil Technology Co., Ltd

Introduction
Thank you for purchasing the C600 Android smart video phone. The C600 is a fully
featured video phone that provides voice and video communication over the data network.
This phone has all the features of a traditional telephone and all gives access to many data
service features. This guide will help you easily use the various features and services
available on your phone.

Smart Video Phone Fanvil C600 Overview

With Attachment

Item Function

Fanvil Technology Co., Ltd

Power Adapter Power supply for telephone.

Network Cable Used to access network for the phone.
Handset Make phone calls with the phones basic functions.
Handset Cable Connected with the Handset and the phone.

Phone component descriptions

Phone Elements Icon

Fanvil Technology Co., Ltd

Key Function

Headset key. Click it enter the dial interface when the

phone is in desktop, receive the call using headset mode
or switch the call to headset mode during a call.
Option key. You can browse and accomplish all functions
of the phone through pressing this key. Also, you can
press and hold this key to complete screen-shot.
The hands-free key. Click it enter the dial interface when
the phone is in desktop, receive the call using hands-free
mode or switch the call to hands-free mode during a call.
Return key. Press this button in the detailed interface, it
will return to the previous interface; If it is pressed in the
application program interface, the current program will be
closed.
Home key. Press this key, the phone will return to the idle
screen. Also, you can press and hold this key to disply all
the processes and manully finish off running in the
background process.

The camera.

Fanvil Technology Co., Ltd

Interface introduction

Interface Illustration Picture 1

Name Meaning

Connect SD Card for

SD Card Interface
saving data.

Input: 220V AC
DC Power Interface
Output: 12V DC

Specification RJ45, connect it

PC Interface
computer.

Fanvil Technology Co., Ltd

Specification RJ45, connect it

Internet Interface
to network.

Specification RJ9, used to

Handset Interface connect the Handset to the
phone.

Fanvil Technology Co., Ltd

Interface Illustration Picture 2

Name Meaning

USB Interface Connect it to USB disk.

Specification RJ9, used to

Headset Interface connect the Headset to the
phone.

Interface for high-definition

HDMI Interface audio and video. A-A interface,
A to A interface.

Fanvil Technology Co., Ltd

y Note:
1. Put the handset line into the handset interface according to the interface illustration.
2. Plug the power adapter into the DC port; poke the other side of the power adapter into
an electric socket.
3. Insert one end of RJ45 network cable into the phones WAN port (Please refer to the
interface illustration picture 1) and put the other end into the network equipment. After

that, if the network connection status on the status bar is displayed as , actions such as
making some telephone calls and surfing the internet could be done. If the network

connection status on the status bar is displayed as , please verify whether the network
was configured correctly and the network cable was plugged in correctly.

Touch Screen Description

You can touch the screen manually to complete the corresponding operation. Here are three
ways to use:
Click: Any icon or button can be clicked to realize its function.

Fanvil Technology Co., Ltd

Touch screen:
y Press and hold the standby interface will pop-up choice wallpaper desktop option box,
you can according to the prompt to change the wallpaper.
y Support full multi-touch.
Slide:
Slide your finger on the screen upward or downward slowly to move the interface on the
screen.
On some kinds of screen such as idle desktop, you can switch the desktop just by moving
your fingers on the screen to left or right. Dragging your finger to slide will not select or
activate anything on the screen.
You can just wait or gently press any place of the screen to stop the sliding after your finger
rapidly sliding on the screen. Gently pressing or touching to stop the scrolling will not select
or activate anything on the screen.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Status Bar

All of the status information about C600 is displayed on the top of the screen. You can
click on the notification icon in the left of the status bar or drag down the drop-down list
with your fingers to enter the notification panel to further review and deal with all of the
information.
Note:The right icon of the status bar cant be drag, just the left can.

Status bar Meaning

Indicates that the phone is in the handset

Handset mode
mode.
Indicates that the phone is in the headset
Headset mode
mode.
Shows that the phone is in silent mode.
This mode can be canceled by directly
Silent mode
clicking the mute button when the
screen is in the idle interface.
Indicates that the call is in hands-free
Hands-free mode
status.
If you set an alarm clock, the alarm
Alarm clock
clock icon will display on the status bar.
Displays that the network connection is
Network
successful. Tap the icon directly into
status (successful)
the network settings.
Network status Shows that the network connected
(failed) failed. You need to check the network is

Fanvil Technology Co., Ltd

properly connected and the parameters

are configured correctly.
Displays that the phone successfully
identifies the USB device. Tap the icon
SD card
directly to switch into the USB
application wizard.
Shows that there are several missed
Missed calls calls. You can click on the icon
directly to switch into the call log.
Shows that the phone is on Do Not
Disturb mode. Any of the call could be
directly rejected before its ring
Open the DND
interface appears. There is only a
missed call icon leaving in the status
bar.
Shows that the call forward function is
Call forward
opened.
Shows that the auto answer function is
Auto answer
opened.
If a phone number is
added to the firewall, then open
Black list the firewall function, all calls about this
phone number could be rejected
directly.

New record Indicates that there are several new

Fanvil Technology Co., Ltd

unread phone recordings.

Functional applications:

Click this icon, and it will switch to pre-dial interface. You can

Phone make some phone calls through the screen.

Has the function of sending and receiving e-mail. When an

account has been configured successfully, you can send and
receive your e-mail on the phone and this account will
Email
automatically sync the contacts to the mailbox account.

It contains Network, Account, Call, Display and so on. You can

Phone configure some settings.

Settings

Support functions such as search, add, remove and edit.

Contacts
It contains Wireless & Networks, Device, Personal and so on,
you can configure some settings in the corresponding
settings
menu.(Android system settings)

Like the phone, with messages to write, read and send function.
Message

All calls will be transferred into voice mail when the MWI is
enabled.
MWI

Fanvil Technology Co., Ltd

Enter into the calendar and you can view the accurate date.
Calendar
Enter the call log and you can view all call records. You can
also view the Incoming Calls, Outgoing Calls and Missed
Call log
Calls records by pressing the Option key.

and Have export and import contacts
Import
Export
Managemen
t

Connect PPPoE

PPPoE

Update of the phone

Please contact with service provider to get the new version to upgrade.
Strongly recommended:

1Before the upgrade the new version, please send personal data backup to mobile devices,

to prevent accidental loss.

2Once the upgrade process, please do not power blackout, equipment may not be able to

start.
Auto provision: Keep phone registered successfully and configure parameters about
automatic updates such as server address, upgrade file name, time interval and so on. And
then the phone will check for updates from the server at a fixed time intervals and upgrade

Fanvil Technology Co., Ltd

itself. See the specific automatically upgrade instructions, please switch to Update.
Manual upgrade---- USB: Will upgrade package in U disk and inserted the U disk into the
USB interface (the content of the need to be updated).Before the phone restart, at the same

time hold down the and , then insert the power supply and will
enter the unit at this time to Recovery mode, you can see under the Recovery operation

menu, shown below

Through the hardkey UP, DOWN , OK, to operate

on the Recovery menu.
Select update from USB equipment or update from external storage device (SD card),
enter the sub-directory and select the upgrade packages, click on OK key to start
upgrade .After the success of the upgrade, there will be prompt on interface, the user can

Fanvil Technology Co., Ltd

immediately return to the main menu select reboot system now to restart the system to
start using the new version.
Notes: In some cases after upgrading, in order to avoid new and old version data of
incompatible problems, needs to remove user data and system cache (the so-called double
wiper) whether you need specific clear, please refer to the Release Note.

Web Update

Input the phones IP on the web;

Input the user name and password to phones web;
Enter MAINTENANCEUPDATE;
Click the button Browser to select the image on your PC and click the button Update;
Waiting, the system will be update success.

Dsskey
IntroductionThis module contains five expansion module, 140 editable key. You can press

and hold the key to edit it. Line1~5, Reidal and Release are the default keys, but you can
also edit them. Like the below picture:

Fanvil Technology Co., Ltd

Type Meaning
Clicking on the button you can dial the mapped number
directly.
Subscribe: NoneBLFPresenceMWIIntercom
Call Park and Call Forward.
Pickup number: The number which server set.
Pickup: That is, when A calls B, B ringing but no one
answered the call, C could dial a number which is
Memory Key comprised of specified prefix and Bs number, and then
C can talk with A.
BLF: It used to prompt you the state of the subscribe
user, and that could pick up the subscribed number by
the state. BLF help you monitor the state of subscribe
user (idle, ringing, a call).
Presence: Compared to BLF, the Presence is also able to
view whether the user is online.
Note: You cannot subscribe the same number for BLF

Fanvil Technology Co., Ltd

and Presence at the same time.

None: You can call the number directly which you set.
This feature is convenient for you to dial the number
which you frequently dialed.
Intercom: This feature allows the operator or the
secretary to connect the phone quickly; it is widely used
in office environments.
MWI: Press this button to call voicemail and listen to
the message.
Call Park: You can use this button to call current
resides on the server, a convenient time to call back.
Call Forward: You can transfer the current call to other
on the phone.
The button map the SIP line, it enter the dial pad and
Line
light the default sip line when you click the button.
The button map some Key Event.
Key Event Title: Consistent with the subscription name.
Subtype: Some basic keys.
It maps the keypad of the phone, allowing you to edit
DTMF
the dialed number or input numbers during a call.
It maps the website. You can click it to open the URL
URL
directly.
It maps the Multicast. You can click it to make a
Multicast
multicast.
This button mapping third-party applications, press it to
Application
open the corresponding application Settings.

Fanvil Technology Co., Ltd

The LED status of BLF

BLF Status LED Color LED Flashing

Invalid None Off
Off Line None Off
Idle Green Steady
Talking Red Steady
Ring Green Fast flash
Alerting Red Steady
Parked Red Fast flash
Subscribe Failed Off None

The LED status of Presence

Presence Status LED Color LED Flashing

Invalid None Off
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Off Line None Off

On Line Green Steady
Talking Red Steady
Ring Green Fast flash
Alerting Red Steady
Available Green Steady
Idle Green Steady
Parked Red Fast flash
Subscribe Failed None Off
Note: Please set Type first, then set subtype and value base on the introduction.
You can select value from cantacts by clicking the contact icon. Save the configuration.
You can delete the dsskey by the same method, press and hold the key to edit it ,
clear->save.

Contacts

Add new local contact

1. Tap the contacts button;

2. Tap + in the upper-right corner;
3. Select Keep Local ;

4. Add a picture for a contact. Tap into the picture selection interface to select
photos in your list of photos when editing contacts. It will automatically return to the
editing interface after you save it. If you want to change the picture, tap the Contacts icon
to select Remove photo ,Take new photo or Select new photo from Gallery ;
5. You can click the little arrow to expand the name what you want to edit;
6. Follow the prompts to complete the edit contacts, you can also select Save to DSS key.
Click Done to save it.

Fanvil Technology Co., Ltd

Add account

1. Tap the contact button;

2. Tap + in the upper-right corner;
3. Select Add account;
4. Edit exchange account and follow the prompts to complete the editing.

Fanvil Technology Co., Ltd

Creat group

1. Tap the Group button;

2. Click + in the upper-right corner;
3. You can seclect Create local group or Create account group;
4. Edit group name, then pick members from contact list;
5. Click Done to save the group.

Favorite

1. Tap the Favorite button;

2. Click + in the upper-right corner;

3. Select the contacts what you want to set, or click to select all the contacts;
4. Click confirm to save them.

Fanvil Technology Co., Ltd

Network Phonebook

Set the remote phonebook

1. Click the edit icon in the upper-right;

2. Click URL;
3. Follow the prompts to fill in the information;
4. Click Done to save it.

Set the LDAP

1. Click the edit icon in the upper-right;

2. Click LDAP;
3. Edit the information following the prompts;
4. Click Done to save it.

Fanvil Technology Co., Ltd

BlockList & CallBarring

Set the Blacklist

You can enable Blacklist, click the + to add number or contacts what you want. Using the
same method to set the WhiteList and CallBarring.
Interception record

Click the in the upper-right, you can see the interception record.

Fanvil Technology Co., Ltd

Phone Settings

System info

Tapping Phone Settings can directly enter the default window System info. It displays
the current system information state.

System Info Interface

Configuration item Meaning

Displays the connection status of the PPPoE, there

PPPoE are three display states : Disabled, Connecting and
the IP address.
Connect mode Displays the selected network mode, DHCP or Static

Fanvil Technology Co., Ltd

IP.
Displays the IP address of the current network
IP address
model.
Displays the Subnet Mask of the current network
Subnet mask
model.
Displays the default gateway of the current network
IP Gateway
model.
Displays the primary DNS server address of the
Primary DNS
current network model.
Displays the standby DNS server address of the
Secondary DNS
current use of the network model.
MAC address Displays the current MAC address.
Version Displays the current version of the phone.
Phone mode Displays the current phone model.
Displays the current configuration of the Accounts
Account and more detailed information will be displayed on
the desktop widget.

Network

Tap Network----> WAN mode interface, the default interface is DHCP: click Save
button to save successfully after the configuration of each interface is finished. Then a tip
box Config saved will be shown.

Fanvil Technology Co., Ltd

DHCP Interface

Static IP Interface

Fanvil Technology Co., Ltd

Configuration Meaning

You can select to use DHCP, which means whether

DHCP Use the DNS to connect network assigned by the
DHCP server.
IP address: Input your assigned IP address.
Subnet mask: Input your assigned subnet mask.
IP gateway: Input your assigned gateway.
Static IP Primary DNS: Input your assigned DNS server
address.
Secondary DNS: Input your assigned Alert DNS
server address.

PPPoE

Tap Network ----> PPPoE. After configuring the parameters, you can click Save
button to save.

Fanvil Technology Co., Ltd

PPPoE Interface

Configuration Meaning

User: Input your assigned PPPoE Username.

Password: Input your assigned PPPoE Password.
Auto connect on power up: Whether to
PPPoE
automatically connect PPPoE on power up.
Auto reconnect: When connecting failed whether to
automatically connect PPPoE.

QoS

Tap Network----> QoS, after selecting or modifying the default settings click the
Save button to save.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

QoS-DSCP Settings

DSCP is one standard of QoS. It can set the priority of Voice, Video and Signal.

Configuration item Meaning

Enable DSCP: Enable/Disable DSCP.

Voice DSCP: Set the number of Voice DSCP.
QoS- DSCP
Video DSCP: Set the number of Video DSCP.
Signal DSCP: Set the number of Signal DSCP.

Slide down the screen to the QoS-WAN VLAN page.

VLAN is Virtual Local Area Network.
Enable VLAN, then you can set VLAN ID, the range of ID number is 0~4095, you can

Fanvil Technology Co., Ltd

also set the priority of 802.1P, the range is 0~7.

Note: You must enable DSCP if you want to set 802.1P priority.

Configuration item Meaning

Enable WAN port VLAN: Enable/Disable WAN

port VLAN.
WAN port VLAN ID: Set the number of VLAN
QoS- WAN VLAN
ID.
SIP 802.1P priority: Set the priority number of
SIP 802.1P priority.

Slide down the screen to QoS-Port VLAN interface.

Port VLAN is based on port VLAN, in the same VLAN port to communicate with each
other.

Configuration item Meaning

Port VLAN mode: Select the status of LAN Port

VLAN.
Follow WAN: Follow the ID number of WAN.
Disable: Disable Port VLAN.
QoS- Port VLAN
Enable: Enable Port VLAN and you can set the
LAN Port VLAN ID different from WAN.
LAN port VLAN ID: Set the number of LAN Port
VLAN ID.

Fanvil Technology Co., Ltd

Port

Tap Network ----> Port, after selecting or modifying the default settings click Save
button to save.

Port Settings
Configuration item Meaning

RTP port range start(10000-60000): Set the

telephones RTP start port. This port is distributed
Port to dynamic allocation.
RTP port quantity(100~400): Set the maximum
number of allocated RTP port. The default is 200.

Fanvil Technology Co., Ltd

STUN

Tap Network ----> Stun, after selecting or modifying the default settings click Save
button to save.

STUN Interface

Configuration item Meaning

Server address: Configure the SIP STUN server

address.
Server port: Configure the STUN server port .The
STUN
default is 3478.
Local SIP Port:Configure the local sip port.The
default is 5060.

Fanvil Technology Co., Ltd

802.1x

Tap Network ----> 802.1x, after selecting or modifying the default settings click Save
button to save.

Accounts

Account

Tap Accounts---->Account1, the default password is 123456, you can slide down to
set more parameters follow the prompts , after all the parameters are set, you can click
Save button to save.
(Note: The Account1, 2, 3, 4 ,5,6 has the same settings.)

Fanvil Technology Co., Ltd

Account Page 1

Configuration item Meaning

Enable registration: Enable/Disable registration.

Disable register, Enable register.

Server address: Set your SIP server address.
It supports the address in the form of domain
name.
Account
Authentication user: Set your SIP account.
Authentication Password: Set your SIP
password.
SIP user: Input the phone number assigned by
your VoIP service provider. Phone will not

Fanvil Technology Co., Ltd

register if there is no phone number configured.

Account Page 2

Display name: Configure the display name, it

allows the English alphabet input (does not
support Chinese).
Domain realm: Configure the SIP domain name
(You do not need to configure it because the
system will configure automatically).
Proxy Server Address: Configure the proxy
server address.
Proxy Server Port: Configure the proxy server
address.
Backup Proxy Server Address: Configure a
backup server address. When the primary server
is not connected, you can use the backup server

Fanvil Technology Co., Ltd

for calling communications (The backup server

can be connected only when the primary server
cannot connect); When the primary server is
connected, the phone will automatically switch
back to the primary server to communicate.
Backup server port: Configure the backup server
port.
Backup Proxy Server port: Configure the SIP
register proxy server port.
Server name: Configure the SIP register server
name.
Registration expire(s): Configure the server
registration expire(s), default is 3600 seconds. If
the registration time of the server required is
greater or less than the time of the phone to
configure, telephone can automatically modify to
the time limit that server recommended, and
register again.
DTMF Type: Set DTMF mode, there are four
types:
In-band
RFC2833
SIP_INFO
AUTO
Different server vendors can provide different

Fanvil Technology Co., Ltd

models.
RFC protocol edition: Configure the protocol
version of the phone. When your phone needs to
communicate with gateway which uses SIP1.0,
such as CISCO5300, you need to configure to
RFC2543 to conduct normal communication.
RFC3261 is used by default.
Anonymous call edition: Configure whether to
use anonymous security call. It supports
RFC3323 and RFC3325.
Transport protocol: Configure the transport
protocol, TCP, UDP or TLS.
Ban anonymous call: Configure whether to ban
anonymous call.
Enable strict proxy: Compatible with special
server. (Using source address of opposite side
when return message, no longer use the address
in via field).
Subscribe for MWI: After successful
registration, you can subscribe to information,
such as someone else's status or voice mail and so
on.
Enable Rport: Configure whether to support
RFC3581, Rport mechanism is used in internal
network, and requires a SIP server to support, it

Fanvil Technology Co., Ltd

is used for keeping the NAT connect of the

internal network and the external network.
Enable PRACK: Configure whether to support
SIP-PRACK function (used by Color Ring Back
Tone).
Recommend: Use the default configuration.
Convert URI: When you send URI it will
convert # to %23.
Enable DNS SRV: Configure whether to enable
RFC2782 protocol edition.
Enable displayname quote: Set to make
quotation mark to display name as the phone
sends out signal, in order to be compatible with
server.
Use STUN: Enable/Disable SIP STUN.
Enable BLF List: Enable/Disable BLF List.
BLF list number: Input the number of BLF List.
Enable session timer: Enable/Disable session
timeout.
Session timeout(s): Set the time of session
timeout.
Enable XferBack: This feature is enabled by
default. A call is transferred from others, when
XferBack time timeout or refused to answer ,
the call will be transferred back to Tranfer.

Fanvil Technology Co., Ltd

Use Tel Call : Enable this function ,if you dial

411,the request-url of invite show tel:411.

Global

Tap Accounts---->Global, you can slide down to set more parameters follow the
prompts , after all the parameters are set, you can click Save button to save.
Strict Branch ----The value of the branch must be after z9hG4bK in the VIA field of
the INVITE message received, or the phone will not respond to the INVITE.

Enable Group ---- Enable SIP Group Backup. This will affect all lines.

Enable RFC4475---- Enable this function, The call would be established that the special
characters with the display name in the Invite message must be enclosed in double
quotation marks
Disable this function, Regardless of whether the display name has the space and the
double quotation marks , can normally set up a call.

Registration Failure Retry Time----If registration failed, the phone will attempt to
register again after registration failure retry time.

Enable Strict UA Match---- The call would be refused if received the invite in the request
url is not registered in the SIP Line.

Call

Tap Call enter the interface, after configuring the parameters of each interface, you can
click Save button to save.

Fanvil Technology Co., Ltd

General

Tap Call---->General interface, after configuring the parameters, you can click Save
button to save.

General Interface
Configuration Meaning

Do not disturbIt will not allow any phone call while

enable the function, but there will have prompt in the
missed calls.
General
Enable call waitingWhether enable call waiting.

Call waiting toneIf enable the function, there will have

call waiting tone if there has a call waiting.
Allow IP Call: Allow IP direct call, or disable IP call for
dialing.
Talk DTMF Tone: Allow DTMF voice played during
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

talking, or only send DTMF without local play.

Dial DTMF Tone: Enable dialing DTMF tone played,
or disable for dialing DTMF tone played.
Enable password dialWhether enable the password
dial.
Password dial prefixSet the prefix of the number.

Password lengthAfter setting the length successfully,

the number dialed out will hide the appropriate
length .For example, sets the prefix number to 138,the
password length is 5, and dial the number
138142658941 ,then it will display as 138*****8941 on
the dial interface.
Hide DTMFIt has four choices: Disable, All, Delay
and Last show.
Disable that is the content you input is clear text and it
can be seen.
All that is the content you input is hidden immediately
and displayed as *.
Delay that is the content you input will display in clear
text first and then displayed as *.
Last show that is the last one inputted will displayed in
clear text and the others will displayed as *.
Ban outgoing: Forbid call out.
Enable call transferEnable/Disable the function, if
disable the function, the phone can not do transfer .
Semi-attended transferDuring the talk, press Transfer
firstly, and then press Send after inputting the number
that you want to transfer to. You are waiting for
connection, now, press Transfer and the transfer will
be done. (To use this feature, you need enable call
waiting and call transfer first).

Fanvil Technology Co., Ltd

Enable Auto on HookEnable this function, and set the

auto on hook time, the phone will auto return to previous
interface afer the time when end a call.
Enable 3-way Conference: You can make a conference
when enale this function.
Enable call completion: Enable Call Completion by
selecting it, if the callee is busy, the sip server will
inspect the callee status at intervals. If the callee is idle,
the server will send notify message to inform the caller
whether redial.
Enable auto redialEnable this function, calling out
someone, if he is in busy, it will pop up a prompt box
whether to auto redial, press OK, the phone will call out
him according the Interval and Times that you set.
Auto redial intervalSpecify the Auto Redial interval.

Auto redial timesSpecify the Auto Redial times.

Enable intercomEnable Intercom Mode by selecting

it. Then you can set up connection to the operator or the
secretary quickly, and it widely used in office
environments.
Enable intercom muteEnable mute mode during the
intercom call.
Enable intercom toneIf the incoming call is intercom
call, the phone plays the intercom tone.
Enable intercom bargeEnable Intercom Barge by
selecting it, the phone auto answers the intercom call
during a call. If the current call is intercom call, the
phone will reject the second intercom call.
Update dial call: Enable this function, the phone will
update the peer display name based on the 200OK

Fanvil Technology Co., Ltd

packet.
Enable Multi Line Enable phone to make calls for 10
lines max, or disable for 2 lines max.
Active URI Limit IP: IP address of the server for the
Action URL messages described below.
Memroy Key to BXfer: Enable this function, can use
the function keys to blind transfer.
Enable CallLog: Enable this function, the phone can
see call records.
Ring from headsetEnable Ring From Handset by
selecting it, the phone plays ring tone from handset.
Enable Hide Local Area Code: Enable/Disenable the
function, if enable the function it will hide the local
number.
Auto Hold: when you call or receive the second way
calls, the phone will hold the first way call.
Country code: Input the country number, such as the
number of China is 86.
Area codeInput the region numberthat is the area
number ,for example ,the number of Beijing is 10.
Call Waiting CodeYou can choose the Call waiting
response, 180 or 182.
Default Ext Line: You can select any sip to be the
default line, the number will display in the upper-left.
Default Dial Mode: Choose the default mode when you
call other.
Default Ans Mode: Choose the mode how you receive
the call.
Enable Record: You can record the conversation when
enable this function.
Use SIP numbering plan: Enable this function, you can
register the sip number with letters and characters.
Configure Emergency Number: You can configure one
or more number here, and call them even if the screen

Fanvil Technology Co., Ltd

lock.
Enable 3rd IM App: Enable this function, you can
install the third instant messaging app.
IM App: If you select the third app, when you press
Headset/Handsfree key, the phone will use the app to
make a call.
Offhook to open app : If you select the third app, when
you pick up handset, the phone will use the app to make
a call.
Supported 3rd IM Set: The third instant messaging app
set.

DND

Tap Call----> DND interface. After configured the parameters, you can click Save
button to save.

Fanvil Technology Co., Ltd

DND(Do not disturb) Mode: Off , Phone and Line.

x Off: Accept any incoming call.

x Phone: The phone will reject any incoming call, the callers will be reminded by busy,
but any outgoing call from the phone will work well.
x Line: The phone will reject any incoming call to this SIP account when you enable
DND Line.

Enable DND Timer: The phone will automatically close DND After DND Timer.
Enable white list number in DND: Enable this feature to allow incoming the white list
number.

Dial plan

Tap Call---->Dial plan interface. After configuring the parameters, you can click
Save button to save.

Fanvil Technology Co., Ltd

Dial Plan Interface

Configuration item Meaning

Use E164: Enable/Disable E164. After it is

enabled, it will directly dial numbers according
with E164 rules.

Press # to Send: Enable/Disable. After enabling

Dial plan the function, input the number end with # in the
non-pre-dial mode, it will directly dial the phone
number.

Send after(3-30): Enable/Disable. After enabling

the function, pre-dial mode to set the length of the
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

input number is automatically closed.

Press # to Do Blind Transfer: Enable/Disable.

After enable this function, when you do a blind
transfer, you can input number end with # do
send it.

Blind Transfer on Onhook: Enable/Disable. After

enable this function, when you end input the
transfer number, you can directly on hook the
phone to do the blind transfer.

Attended Transfer on Onhook: Same as above,

but do the attended transfer.

Attended Transfer on Conference: Enable this

function, when you host a 3-way conference, you
can on hook to do the attended transfer.

Dial prefix: Enable/Disable. After enabled the

function, it will be automatically added the outside
line prefix number before the outgoing number
when you are going to call.

Method to use the prefix: Example.

If you set the prefix is 135856, and you want to

dial the number 13585679801. Then when you dial

Fanvil Technology Co., Ltd

the number, you can press and hold 0, when the

+appears, you can just input 79801and send the
number, the +79801 is the numb you input, but
you can see the dialing number is 13585679801.

Custom dialing rules: This feature allows the user

to create rules to make dialing easier.

Account

Tap Call---->Account1\2\3\4\5\6 interface, after configuring the parameters, you can

click Save button to save.

Account 1
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Configuration Meaning

Enable Always Forward: Set the forward number

below and enable this function, when it has a coming
call, the phone will forward the call to the setting
number and display one missed call.
Enable Busy Forward: Same as the above function,
but when the phone has one call it can forward the
incoming call.
Enable No Answer Forward: Same as the above,
when the phone does not answer the call after timeout,
it will forward the incoming call.
MWI number: Fill in the MWI number.
Enable Hotline:Enable this function, configure the
Account 1
hotline number and time, the phone will auto call this
number when enter the dialing interface and timeout.

Enable auto answerEnable auto answer and set the

timeout, when the phone has incoming call, it will auto

answer when time out.
Enable missed call log: Enable this function, the status
bar has prompt when missed incoming calls and save
them to call log history.
Select Line Tone: Set each SIP Line rings.

Caller ID TypeIt is default display long number, and

support standard ISP number .If not enable, the phone

Fanvil Technology Co., Ltd

will display last few numbers matched.

Enable user=phoneEnable this, the phone can make

call directly, if not, you need to precede the phone

number with country code and Area code, depending
on your environment.

Dial without registeredSet call out by proxy without

registration.

Display

Tap Display ---->Display interface. After configuring the parameters, you can click
Save button to save successfully.

Configuring the phone screen displays a number of parameters, including Operator

Fanvil Technology Co., Ltd

Mode,Screen savers ,Power indicator and Desktop.

Operator Mode
After enable operator mode, if you press the home key, the main interface will enter
dsskey interface. If disable this function, the phone will return to desktop interface when
press home key.
Screen saver
Field Name Explanation
Sleep operation Sleep mode: Disabled, LCD power off and Start screen saver.
Timeout to sleep Set the sleep timeout.
ScreenSaver after active Whether to enable the screensaver timeout.
Timeout to ScreenSaver Set the screen saver timeout.
Daydream Set the screen saver application.

Power indicator
Field Name Explanation
Turn off Power Light Disables Power Light if selected.
Enable Messaging Indicator SMS indication is 1000ms On 1000ms Off The SMS will show the
Messages left in the box. After Access the SMS, the LED will be
no lights.
Enable Voice Mail Indicator MWI indication is 1000ms On 1000ms Off The MWI will show
the Messages left in the box. After Access the MWI, the LED will
be no lights.
Enable Misse Call Indicator Miss Call indication is 400ms On 400ms off The Call log will
show the Miss call counted. After access the Call log keys, the
LED will be no lights.

Desktop
When enable shortcuts and widgets, you can press and hold the application to set
shortcuts to desktop.

Fanvil Technology Co., Ltd

Tone

Configuration of the telephone voice parameters, including selecting a ringtone, SMS

notification tones, keypad tones, and other.
Tap Settings ---->Tone interface. After configuring the parameters, you can click
Save button to save successfully.

Time&date

Tap Settings ---->Time&date interface. After configuring the parameters, you can
click Save button to save successfully.

Fanvil Technology Co., Ltd

Field Name Explanation

Simple Network Time Protocol (SNTP) Settings
Enable SNTP Enable or Disable SNTP.
Primary Server IP address of Primary SNTP Server.
Time Zone Local Time Zone.
Time format If checked use 12-hour clock, clock is 12 hour mode. If checked use
24-hour clock, clock is 24 hour mode. Default is 24 hour mode.
Date Separator Four date separators are available: /, , . , space.
Manual Time Settings
Select the values for the current year, month, day, hour and minute. All values are required.
Note: Be sure to disable SNTP service before entering manual time and date.

Maintain

Tap Settings ---->Maintain Enter the interface.

Fanvil Technology Co., Ltd

Service port

Tap Maintain---->Service port interface. After configured the parameters, you can
click Save button to save successfully.

Service Port Interface

Configuration Meaning

Enable telnet: Open telnet function.

Telnet is a common method of remote control of
the Web server, end users can enter the command
Service port
telnet program, these commands will be run on the
server, just like directly on the server console, enter
the same. Can locally be able to control the server.

Fanvil Technology Co., Ltd

Telnet Server port: Input telnet port ,default is 23.

Web server type: Select HTTP or HTTPS.
After selecting one server, you can use the selected
server to login the telephones web page.
Such as: https://192.168.1.20.
HTTP port: Input server port, default is 80.

CWMP set

Tap Maintain----> CWMP set the default password is 123456, enter the CWMP set
interface ,interface. After configured the parameters, you can click Save button to save
successfully.

CWMP Set Interface 1

Fanvil Technology Co., Ltd

CWMP Set Interface 2

Configuration Meaning
Enter the password to access the network menu landing configuration
interface.
Enable TR069:Enable network modeselect China Telecom or Normal

ACS Server: Input the address of the ACS server provider

CWMP set
Account: Input service provider assigns the account.
Password: Input the account corresponding password.
Serial Number: Input the Serial number
Auto connect: When enabled, you can fill out the account and password.

Fanvil Technology Co., Ltd

Backup

Tap Maintain----> Backup , the default password is 123456, enter the backup interface

Backup Interface
Configuration Meaning

Backup: The contact data, phone settings data and

calender backup to a specified folder
Backup
Recovery: Recovery has backup contacts, phone
settings configuration.

Phone Reset

Tap Maintain----> Phone Reset, the default password is 123456, enter the Phone Reset
interface

Fanvil Technology Co., Ltd

Clear all: This will restore factory default and remove all configuration information.
Clear all but keep SIP account: This will restore factory default and remove all
configuration information but keep SIP account.
Clear all but keep SIP account, Dial Plan and DSS Keys: This will restore factory default
and remove all configuration information but keep SIP account, Dial Plan and DSS Keys.

Update

Tap Maintain----> Update, enter the update interface

Fanvil Technology Co., Ltd

Update Interface
Configuration Meaning

For ACS certification, authentication is successful

System update
you can check the system updates.

OTA System Update

Support the OTA upgrade

Note: only support upgrade .zip format.

Fanvil Technology Co., Ltd

Audio

Touch Settings ----> Audio, enter the detailed view.

Audio

Touch Audio----> Audio interface. This is global setting, applies to all the sip lines.
After configuring the parameters, you can click Save button to save successfully.

Fanvil Technology Co., Ltd

Audio Interface

Configuration item Meaning

Enable VAD: Whether to enable VAD. (Voice

Audio
Activity Detection)

Audio param

Touch Audio----> Audio param interface. After configuring the parameters, you can
click Save button to save successfully.

Fanvil Technology Co., Ltd

Audio Param Interface

Video

Touch Settings ----> Video and enter the settings interface.

Video param

Touch Video----> Video param interface. After configuring the parameters, you can
click Save button to save successfully.
Note: If you want More clear and smooth video screen, please select H.264 within 2M
bandwidth.

Fanvil Technology Co., Ltd

Video Param Interface

Bandwidth

Touch Video----> Bandwidth interface. After configuring the parameters, you can
click Save button to save successfully.

Fanvil Technology Co., Ltd

Bandwidth Interface

Configuration item Meaning

Display Mosaic Frames: The video fluency will

improve, but there will be a Mosaic when you
enable this feature.; disable this configuration,
normal phone calls but pause video picture.
Video bit rate: Set receiving video bandwidth in
Bandwidth video calls. You can choose 11 kinds of video
bandwidth types (64Kbps, 192Kbps,
256Kbps, 384Kbps, 512Kbps, 768Kbps,
1Mbps, 1.6Mbps,
2Mbps,3Mbpsor4Mbps).
Video Resolution: Set video encoding resolution
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

in a video call. You can choose 4 types of video

resolution (QCIF (176*144), CIF (352*288)
VGA(640*480), 4CIF (704*576) or 720P
(1280*720).

Softkey

Tap Settings---->Softkey enter softkey interface. Select softkey-screen first, then add
or delete the softkey by clicking the arrow, you can also click the arrow up or down to
adjust the softkeys position.

Softkey Interface
For example, the below picture shows the call dialer softkey. It can show up to six keys.

Fanvil Technology Co., Ltd

Call Dialer Softkey

MCAST

This feature allows you to make some kind of broadcast call to people who are in multicast
group. You can configure a multicast DssKey on the phone, which allows you to send a
Real Time Transport Protocol (RTP) stream to the pre-configured multicast address(es)
without involving SIP signaling. You can also configure the phone to receive an RTP
stream from pre-configured multicast listening address(es) without involving SIP signaling.
You can specify up to 10 multicast listening addresses.

Tap Settings----> MCAST enter the multi-cast interface, you can follow the prompts to
fill in the name and host, you can also set the priority for the call.

MCAST Setting Meaning

Normal Call Priority Define the priority of the active call, 1 is the highest priority, 10 is
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

the lowest.
Enable Page Priority The voice call in progress shall take precedence over all incoming
paging calls.
Name Listened multicast server name.

Host: port Listened multicast servers multicast IP address and port.

Reboot

Tap Maintain----> Reboot interface. You can click Reboot button to pop-up reboot
dialog box, click OK to reboot the phone, click Cancel will have no operation.

Call Service

You can register the sip line on the web or by LCD, the below picture show the web
register configuration. The status can show that if the line register successfully. When
register success, the upper-left of status bar will show the display name and number.

Fanvil Technology Co., Ltd

Outgoing & Incoming call

1. Pick up the handset, press the headset/handsfree key or click line key to the dial
interface;
2. Select the line and enter the number ;

3. Click #send, softkey-redial or ;

4. You can also click video to invite a video call.

Fanvil Technology Co., Ltd

When the phone has an incoming call, you can click audio or video to answer the call, if you
did not select, the phone will follow the default ans mode you set when you pick up the
handset. You can also choose forward or reject the call.

Video Call

1. Pick up the handset, press the headset/handsfree key or click line key to the dial interface;
2. Select the line and enter the number;
3. Click Video to make a call;

Fanvil Technology Co., Ltd

4. Click to end or re-invite the video;

Fanvil Technology Co., Ltd

5. Click to adjust the video screen mode and video mode.

Blind Transfer

1. During the call, click transfer enter the dial interface;

2. Input the number or select contact from contacts or call log;
3. Click transfer;
4. If transfer success, the phone will auto end the call, if transfer failed, the phone will
return to the conversation interface and hold the call.

Fanvil Technology Co., Ltd

Semi-attended Transfer

1.During the conversation, click transfer enter the dial interface;

2.Input the number or select contact from contacts or call log, final, click #send or ;
3.When the other end ringing, click transfer to complete the semi attend transfer.

NOTE: If you want to use this function, you need to enable the call waiting and call
transfer.

Attended Transfer

1.During the conversation, press the transfer key ;

2.Input the number you want to transfer to;

Fanvil Technology Co., Ltd

3.Tap #send; or ;
4.Press transfer key after the call answered , and transferred successfully.

NOTE:
Call waiting and call transfer must be enabled.
The SIP server must support RFC3515.

Conference Call

1. Press the CONF softkey during an active call;

2. The first call will be placed on hold and dial tone will be heard;
3. Dial the number to be added to the conference;

4. Press Send or ;
5. When the call is answered, the conference will be started;
6. To release the conference, press Split.

.
Conference Interface
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Call Hold

1. Click the Hold to put the active call on hold;

Fanvil Technology Co., Ltd

2. If there is only one call on hold, press the Resume to retrieve the call;
3. If there is more than one call on hold, click the dialog to change conversation, then click
the Resume button to retrieve the call.

Call record

1. During the conversation, press the icon to start record;

2. Please press the icon to stop record;

3. If you want to listen to the recording, you can open the music application, enter playlists
where my talking recordings.
NOTE: If you want to use this function, you need to check Enable Record.

To Ring Page

When calls come in, Collapse button becomes To Ring Page, click it to jump to a call,
or BLF Ring of page. And then, back to Collapse button when all the incoming calls are
read.

Call to order according to the corresponding pages are accessed later restored to the
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Collapse button.
For example:
1. PhoneA Enable operator mode;
2. PhoneA Press the home key, the main interface will enter dsskey interface;
3. PhoneA in the Expansion Module2 and Configure a dss key with numberB to
memorykey(speed dial / blf / presence / none);
4. PhoneB call PhoneA When PhoneA in the other Expansion Module, Collapse button
will become To Ring Page.

Android Settings

Ethernet configuration

Fanvil Technology Co., Ltd

Click Settings, select Ethernet configuration switch to the Ethernet configuration

interface. You can choose to turn on or turn off the Ethernet, if you turn on the Ethernet, it
will auto connect to networking, otherwise, the phone can not connect to networking.

Security

1. Set the Screen lock.

z Click Settings, enter the android settings interface;
z Click Security->Screen lock enter the configuration interface;
z Follow the prompts to set screen lock which you want to use;
z Set automatically lock time.
2. Set owner info, it will display on the lock screen.
3. Set if make passwords visible.

Fanvil Technology Co., Ltd

Language&Input

Language&Input Interface
1. Click Settings enter the android settings interface;
2. Click language&input enter the above picture interface;
3. Select language to set what you want to use;
4. Tick the input method which you want to use.

Web Settings

Logon

There are two levels of access: root level and general level. A user with root level access
can browse and set all configuration parameters, while a user with general level can set all
configuration parameters except server parameters for SIP and can not browse the
configuration file.
Default user with general level:
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Username: guest
Password: guest
Default user with root level:
Username: admin
Password: admin

Network

About the network mode settings, please refer to the phone settings.

QoS & VLAN

The phone supports 802.1Q/P protocol and DiffServ configuration. Use of a Virtual LAN
(VLAN) allows voice and data traffic to be separated.

Fanvil Technology Co., Ltd

Chart 1 shows a network switch with no VLAN. Any broadcast frames will be transmitted
to all other ports. For example, and frames broadcast from Port 1 will be sent to Ports 2, 3,
and 4.

Chart 2 shows an example with two VLANs indicated by red and blue. In this example,
frames broadcast from Port 1 will only go to Port 2 since Ports 3 and 4 are in a different
VLAN. VLANs can be used to divide a network by restricting the transmission of
broadcast frames.
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

Note: In practice, VLANs are distinguished by the use of VLAN IDs.

Field Name Explanation

Enable LLDP Enable or Disable Link Layer Discovery Protocol (LLDP) .
Packet Interval The time interval for sending LLDP Packets.
Enable Learning Function Enables the telephone to synchronize its VLAN data with the
Network Switch. The telephone will automatically synchronize
DSCP, 802.1p, and VLAN ID values even if these values differ
from those provided by the LLDP server.
Enable DSCP Enable or Disable Differentiated Services Code Point (DSCP) .
SIP DSCP Specify the value of the SIP DSCP in decimal.
Audio DSCP Specify the value of the Audio DSCP in decimal.
Video RTP DSCP Specify the value of the Video RTP DSCP in decimal.
Enable WAN Port VLAN Enable or Disable WAN Port VLAN .
WAN Port VLAN ID Specify the value of the WAN Port VLAN ID. Range is 0-4095.
SIP 802.1P Priority Specify the value of the voice 802.1p priority. Range is 0-7.
Audio 8021P Priority Specify the value of the signal 8021.p priority. Range is 0-7.
LAN Port VLAN Mode Follow WAN: LAN Port ID is same as WAN ID.

Fanvil Technology Co., Ltd

Disable: Disable Port VALN.

Enable: Specify a VLAN ID for the LAN port which is different
from WAN ID.
LAN Port VLAN ID Used when the VLAN ID is different from WAN ID. Range is
0-4095.

Service Port

Field Name Explanation

Web Server Type Specify Web Server Type HTTP or HTTPS.
HTTP Port Port for web browser access. Default value is 80. To enhance security,
change this from the default. Setting this port to 0 will disable HTTP
access.
Example: The IP address is 192.168.1.70 and the port value is 8090, the
accessing address is http://192.168.1.70:8090.
HTTPS Port Port for HTTPS access.Before using https, an https authentication

Fanvil Technology Co., Ltd

certification must be downloaded into the phone.

Default value is 443.To enhance security, change this from the default.
Telnet port Port for telnet access. Default value is 23.
RTP Port Range Start Set the beginning value for RTP Ports. Ports are dynamically allocated.
RTP Port Quantity Set the maximum quantity of RTP Ports. The default is 200.
Notes:
Any changes made on this page require a reboot to become active.
It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024. Values
less than 1024 are reserved.
If the HTTP port is set to 0, HTTP service will be disabled.

Registration

Note: If the proxy configuration is same as the register configuration, in the web interface,
the proxy fields are empty. While it is different with register configuration, the config info
will display in the web interface. The backup proxy server will be used if the primary server
is unavailable.

Set the audio codecs for current SIP Line.

Fanvil Technology Co., Ltd

Dial Plan

Basic Settings

This phone supports 7 dialing modes:

1. Press # to Send - Dial the desired number, and press # to send it to the server.
2. Send after seconds - Number will be sent to the server after the specified time.
3. Press # to Do Blind Transfer - Press # after entering the target number for the transfer.
The phone will transfer the current call to the third party.
4. Blind Transfer on Onhook - Hang up after entering the target number for the transfer. The
phone will transfer the current call to the third party.
5. Attended Transfer on Onhook - Hang up after the third party answers. The phone will
transfer the current call to the third party.
6. Attended Transfer on Conference Onhook- Hang up during a 3-way conference call, the
other two ways will make a call.
7. Dial Prefix- If you set the prefix is 135856, and you want to dial the number
13585679801. Then when you dial the number, you can press and hold 0, when the
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
1

+appears, you can just input 79801and send the number, the +79801 is the numb you
input, but you can see the dialing number is 13585679801.
8. Enable E.164- You can refer to the E.164 standard.
9. DSS KEY Transfer Mode - It has four choices: Disable, Blind,Attended Transfer and
New Call .
x Disable:
1. DSS key transfer mode is Disable; then configure a dsskey with numberB to
memorykey(speed dial / blf / presence / none);
2. During the call, press DSS key, it will relize the corresponding function.
x Blind Transfer:
1. DSS key transfer mode is blind transfer; then configure a dsskey with
numberB to memorykey(speed dial / blf / presence / none);
2. During the call, press DSS key to make blind transfer directly.
x Attend Transfer:
1. Enable Attended Transfer on Onhook ;
2. DSS key transfer mode is attend transfer; then configure a dsskey with
numberB to memorykey(speed dial / blf / presence / none);
3. During the call, press DSS key to call B;
4. When B answer;
5. The phone hangup and a call was attended transfer with B.
x New Call:
1. DSS key transfer mode is New Call; then configure a dsskey with
numberB to memorykey(speed dial / blf / presence / none);
2. During the call, press DSS key to call B;
3. Press conference key after B answered ,the conference will be started;
4. Press transfer key after B answered , and transferred successfully.

Dial Plan Add

This feature allows the user to create rules to make dialing easier. There are several different
options for dial rules. The examples below will show how this can be used.
Example 1: Substitution -- Assume that it is desired to place a direct IP call to IP address

Fanvil Technology Co., Ltd

172.16.2.208. Using this feature, 123 can be substituted for 172.16.2.208.

Example 2: Substitution -- To dial a long distance call to Beijing requires dialing area code
010 before the local phone number. Using this feature 1 can be substituted for 010. For
example, to call 62213123 would only require dialing 162213123 instead of 01062213123.

Example 3: Addition -- Two examples are shown. In the first case, it is assumed that 0 must
be dialed before any 11 digit number beginning with 13. In the second case, it is assumed
that 0 must be dialed before any 11 digit number beginning with 135, 136, 137, 138, or 139.
Two different special characters are used.
x -- Matches any single digit that is dialed.
[] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges
separated by commas, or a list of digits.

Fanvil Technology Co., Ltd

Field Name Explanation

Phone number There are two types of matching: Full Matching or Prefix Matching.
In Full matching, the entire phone number is entered and then mapped
per the Dial Peer rules.
In prefix matching, only part of the number is entered followed by T.
The mapping with then take place whenever these digits are dialed.
Prefix mode supports a maximum of 30 digits.
Destination Set Destination address. This is for IP direct.
Port Set the Signaling port, the default is 5060.
Alias Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.

Note: There are four types of aliases.

1) All: xxx xxx will replace the phone number;
2) Add: xxx xxx will be dialed before any phone number;
3) Delete: The characters will be deleted from the phone number;
4) Replace: xxx xxx will be substituted for the specified characters.
Suffix Characters to be added at the end of the phone number. This is
optional.
Delete Length Sets the number of characters to be deleted. For example, if this is set to
3, the phone will delete the first 3 digits of the phone number. This is
optional.

Fanvil Technology Co., Ltd

Security

Browse to the security file to be updated. Click the Update button to update.
Note: The sip TLS file and https file both support xx.pem format.

Fanvil Technology Co., Ltd

Fanvil Product User Manual IP Phone Model: BW320
No ratings yet
Fanvil Product User Manual IP Phone Model: BW320
53 pages
c62 User Manual
No ratings yet
c62 User Manual
81 pages
BW206 User Manual
No ratings yet
BW206 User Manual
38 pages
F52 Voip Phone User Manual: Fanvil Technology Co., LTD
No ratings yet
F52 Voip Phone User Manual: Fanvil Technology Co., LTD
96 pages
I12 IP Intercom User Manual: Single Button Dual Button
No ratings yet
I12 IP Intercom User Manual: Single Button Dual Button
54 pages
GSmart F240 PDF
No ratings yet
GSmart F240 PDF
16 pages
CooFone D60 Man PDF
No ratings yet
CooFone D60 Man PDF
83 pages
it2163N__Declaration_of_conformity
No ratings yet
it2163N__Declaration_of_conformity
7 pages
Ipphone Htek 803p Manual
No ratings yet
Ipphone Htek 803p Manual
125 pages
Simpony
No ratings yet
Simpony
8 pages
User Manual
No ratings yet
User Manual
22 pages
XP Cinta User Manual Guide
100% (1)
XP Cinta User Manual Guide
21 pages
RG310 User Manual
No ratings yet
RG310 User Manual
23 pages
Quick Guide of S32 Mobile: Installation and Preparation
No ratings yet
Quick Guide of S32 Mobile: Installation and Preparation
9 pages
500418.user Manual 3871594
No ratings yet
500418.user Manual 3871594
22 pages
Cat® B10 Smartphone User Manual
No ratings yet
Cat® B10 Smartphone User Manual
49 pages
Vtech Phone Ia5863 Manual.r2
No ratings yet
Vtech Phone Ia5863 Manual.r2
58 pages
2.4 GHZ Cordless Telephone With Caller Id: Featuring Clarity Power Technology
No ratings yet
2.4 GHZ Cordless Telephone With Caller Id: Featuring Clarity Power Technology
32 pages
Primo R10 USER MANUAL
No ratings yet
Primo R10 USER MANUAL
10 pages
For Safety 4 2. Introduction To The Mobile Phone .. 7 3. Preparation Before Use 8
No ratings yet
For Safety 4 2. Introduction To The Mobile Phone .. 7 3. Preparation Before Use 8
101 pages
Quadro
No ratings yet
Quadro
76 pages
Tank II Service Manual
No ratings yet
Tank II Service Manual
34 pages
CLT - D6220 CLT - D6222 CLT - D6223: Instruction Manual
No ratings yet
CLT - D6220 CLT - D6222 CLT - D6223: Instruction Manual
22 pages
ST2118 TVVertical
No ratings yet
ST2118 TVVertical
23 pages
Industrial Intrinsically Safe Mobilephone TEV7/TEV8: User Manual
No ratings yet
Industrial Intrinsically Safe Mobilephone TEV7/TEV8: User Manual
28 pages
User Manual Elite MAX
No ratings yet
User Manual Elite MAX
11 pages
I30 Video Door Phone-User Manual
No ratings yet
I30 Video Door Phone-User Manual
54 pages
KF300 UK Orange 1.1 1114
No ratings yet
KF300 UK Orange 1.1 1114
106 pages
10-20L-20T770B-20English-20UM
No ratings yet
10-20L-20T770B-20English-20UM
102 pages
KX-TG1611
No ratings yet
KX-TG1611
32 pages
KX TG1611 PDF
No ratings yet
KX TG1611 PDF
32 pages
Operating Instructions: Before Initial Use, See "Getting Started" On Page 7
No ratings yet
Operating Instructions: Before Initial Use, See "Getting Started" On Page 7
32 pages
Panasonic KX-TG1611 PDF
No ratings yet
Panasonic KX-TG1611 PDF
32 pages
Ia5874 Manual BKM
No ratings yet
Ia5874 Manual BKM
51 pages
15 Mara Phones X1 UserMan 4794248
No ratings yet
15 Mara Phones X1 UserMan 4794248
40 pages
Mportant Safety Instructions: Parts Check List
No ratings yet
Mportant Safety Instructions: Parts Check List
5 pages
User Guide
No ratings yet
User Guide
41 pages
Gsmart Classic User Manual
No ratings yet
Gsmart Classic User Manual
38 pages
Schematic Lenovo A706 PDF
No ratings yet
Schematic Lenovo A706 PDF
27 pages
Lenovosmartphone A706 Ug v1.0 English 20130401
No ratings yet
Lenovosmartphone A706 Ug v1.0 English 20130401
27 pages
Gw825 Telus Lg Iq Ug
No ratings yet
Gw825 Telus Lg Iq Ug
247 pages
Manual m8 Join 1
No ratings yet
Manual m8 Join 1
121 pages
LG 160 User Guide
No ratings yet
LG 160 User Guide
98 pages
DPH-150S DPH-150SE UserManual V3.00 PDF
No ratings yet
DPH-150S DPH-150SE UserManual V3.00 PDF
87 pages
Sasatel Fixed Wireless Phone User Manual
No ratings yet
Sasatel Fixed Wireless Phone User Manual
34 pages
CVYZ-547-BLACK-2GEN
No ratings yet
CVYZ-547-BLACK-2GEN
20 pages
WORLD 718: User Manual
No ratings yet
WORLD 718: User Manual
44 pages
KX-TW501NZ: Operating Instructions
0% (1)
KX-TW501NZ: Operating Instructions
44 pages
Blu F92e 5g Manual
No ratings yet
Blu F92e 5g Manual
33 pages
HUAWEI U1000s Mobile Phone User Guide
No ratings yet
HUAWEI U1000s Mobile Phone User Guide
60 pages
5600 User Manual
No ratings yet
5600 User Manual
34 pages
HMC 300
No ratings yet
HMC 300
13 pages
GSM-Com 608: User Manual
No ratings yet
GSM-Com 608: User Manual
41 pages
User Manual ACK2VP
No ratings yet
User Manual ACK2VP
17 pages
agni user manual
No ratings yet
agni user manual
18 pages
User Guide
No ratings yet
User Guide
40 pages
Walton Primo EF6 User Manual
No ratings yet
Walton Primo EF6 User Manual
8 pages
LG-P690b: English Français
No ratings yet
LG-P690b: English Français
252 pages
Protect Your Child from Electricity Dangers
From Everand
Protect Your Child from Electricity Dangers
Ben Lardjani
No ratings yet
Teegala Krishna Reddy Engg. College
No ratings yet
Teegala Krishna Reddy Engg. College
11 pages
E Item 3MCM24-21C-E-BT-0
No ratings yet
E Item 3MCM24-21C-E-BT-0
1 page
Lect 17 Amp Freq Resp
No ratings yet
Lect 17 Amp Freq Resp
22 pages
Document No PCPL-0532-4-407-04-11-1 Battery Data Sheet Section - 4 PAGE: 1 of 4
No ratings yet
Document No PCPL-0532-4-407-04-11-1 Battery Data Sheet Section - 4 PAGE: 1 of 4
4 pages
Cmscont 034757
No ratings yet
Cmscont 034757
2 pages
DF Assignments
No ratings yet
DF Assignments
31 pages
Addressing Over GB - NSVC
No ratings yet
Addressing Over GB - NSVC
3 pages
USB Interface: Supplement To Operating Instructions
No ratings yet
USB Interface: Supplement To Operating Instructions
22 pages
2015 Summer Model Answer Paper
No ratings yet
2015 Summer Model Answer Paper
25 pages
BEKG 1123 Principles of Electric and Electronics: Direct Current (DC) Circuits
No ratings yet
BEKG 1123 Principles of Electric and Electronics: Direct Current (DC) Circuits
121 pages
Photo Transistor: Dr.A.Anbarasi Associate Professor Department of Physics Cuddalore
No ratings yet
Photo Transistor: Dr.A.Anbarasi Associate Professor Department of Physics Cuddalore
14 pages
Ambient Noise in Acoustic Underwater Communication Modelling and Analysis
No ratings yet
Ambient Noise in Acoustic Underwater Communication Modelling and Analysis
6 pages
Quickspecs: HP Elitebook 850 G8 Notebook PC
No ratings yet
Quickspecs: HP Elitebook 850 G8 Notebook PC
50 pages
Modifikacije FT 817
No ratings yet
Modifikacije FT 817
2 pages
Fostex Fe 208sigma
No ratings yet
Fostex Fe 208sigma
1 page
ARRIS Vip1113
No ratings yet
ARRIS Vip1113
2 pages
HV Impulse Current
No ratings yet
HV Impulse Current
9 pages
Sonodyne SDV2020
No ratings yet
Sonodyne SDV2020
2 pages
Homework 2 Sol
No ratings yet
Homework 2 Sol
12 pages
Comparisonof Egyptian Standards
No ratings yet
Comparisonof Egyptian Standards
16 pages
CDA-7944R/ CDA-7842R: FM/MW/LW/RDS Tuner/CD Player/ FM/MW/LW/RDS Compact Disc Receiver
No ratings yet
CDA-7944R/ CDA-7842R: FM/MW/LW/RDS Tuner/CD Player/ FM/MW/LW/RDS Compact Disc Receiver
88 pages
LT500-LT500D Quick Installation Guide
No ratings yet
LT500-LT500D Quick Installation Guide
4 pages
Venky Ica Assigment
No ratings yet
Venky Ica Assigment
1 page
Digital Logic Session Plan
No ratings yet
Digital Logic Session Plan
5 pages
IBBS20L-E Hardware Description (01) (PDF) - EN
No ratings yet
IBBS20L-E Hardware Description (01) (PDF) - EN
10 pages
GSM Based Wireless Notice Board
No ratings yet
GSM Based Wireless Notice Board
4 pages
Boston Mcs 100
No ratings yet
Boston Mcs 100
16 pages
Unit - Ii - Phase Controlled Rectifiers
No ratings yet
Unit - Ii - Phase Controlled Rectifiers
41 pages
Arb Accessories All Materials.2022
No ratings yet
Arb Accessories All Materials.2022
68 pages
Circuite Echivalente
100% (1)
Circuite Echivalente
20 pages