Scribd
Upload
104 views

Schematic

The document shows a circuit diagram for a device that uses an ESP-03 module connected to an SMAKN DC/DC converter to control two relays and a water valve from a 12V power input. Key inputs are connected through resistors to GPIO pins on the ESP-03 for control of the relays and water valve which are also connected to outputs of the ESP-03 module. An FTDI header connects the ESP-03 to programming.

Uploaded by

Nitin Rastogi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views

Schematic

The document shows a circuit diagram for a device that uses an ESP-03 module connected to an SMAKN DC/DC converter to control two relays and a water valve from a 12V power input. Key inputs are connected through resistors to GPIO pins on the ESP-03 for control of the relays and water valve which are also connected to outputs of the ESP-03 module. An FTDI header connects the ESP-03 to programming.

Uploaded by

Nitin Rastogi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

12V Power Input and Conversion

SMAKN DC/DC Converter


RED
+
BLACK IN RED
- + VCC
OUT YELLOW
-

ESP-03 esp8266 Wiring


VCC ANT
VCC
GPIO14 CH_PD J1
R1KEY VCC
GPIO12 GPIO18
R2KEY 1
GPIO13 RXD
10 k 2
GPIO15 TXD
3
GPIO2 NC FTDI Header for
4 esp8266 programming in circuit
GPIO0 GND
5
6

Relays and Water Valve


VCC

Water
12V
Valve

R1KEY VCC

1 k

R2KEY

1 k

You might also like