Special Issue Manuscript Tracking Form

Journal Title: Materials Today : Proceedings

Special Issue Title: Material Processing and Characterization
Guest Editor: Dr Swadesh Kumar Singh
Guest Editor Email: [email protected]
Guest Editor Phone No. 0091-9866747605

Article Corresponding No. of

Ms ID # Manuscript Title First Author Name Corresponding Author Email
Type Author Name supplementary files

Effect of thermal spray coatings

1 on wear behavior of high tensile Regular Amardeep S. Kang Amardeep S. Kang [email protected] 0
steel applicable for tiller blades

Comparative study of catalytic

action of potassium nitrate and
2 Regular Jyotsna Agarwal Jyotsna Agarwal [email protected] 0
feldspar for the carbothermal
reduction of barites
Sustainabilityof
AlternativeMaterial of R-134a in
3 Regular Raj Kumar Gaurav [email protected] 0
Mobile Air-conditioning System:
A Review
Low temperature simple aqueous
phase chemical synthesis
4 Regular R. K. Mane D. B. Shinde [email protected] 0
andcharacterization of ZnO thin
films
Studies on mechanical and
K.Viswanath K.Viswanath
5 electrical characteristics of PZT- Regular [email protected] 0
Allamraju Allamraju
5H patch
 Investigation into Performance of
6 SiO2 Nanoparticle Based Cutting Regular Anuj Kumar Sharma Anuj Kumar Sharma [email protected] 0
Fluid in Machining Process

Study of High-Temperature
Corrosion Behavior of D-Gun
7 Spray Coatings on ASTM- Regular Rajbir Singh Ankur Goyal [email protected] 0
SA213, T-11 Steel in Molten Salt
Environment

Study of Effects of Temperature

and Pressure in HIP Process on Seyed Ebrahim
8 Regular Amir Rezaie [email protected] 0
Mechanical Properties of Nickel- Vahdat
based Superalloys

Effect of Different Edge

Preparations on The Tensile and
9 Regular V.Vara Prasad V.Vara Prasad [email protected] 0
Hardness Properties of Gtaw
Welded 6082 Aluminum Alloy

Material behaviour
10 characterization of Friction Stir Regular Esther T. Akinlabi Esther T. Akinlabi [email protected] 0
Spot Welding of Copper

An investigation on the effects of

Co, Ti and Si on microstructure,
11 Regular Unnikrishnan T. G Unnikrishnan T. G [email protected] 0
hardness and wear properties of
AlCuNiFe based entropy alloys

Performance and
CombustionCharacteristics of
12 Thermal Barrier Coated (YSZ) Regular Vikrant Garud Vikrant Garud [email protected] 0
Low Heat Rejection Diesel
Engine
 Oxidation and Corrosion
13 resistance of AlCoCrFeTi High Regular Arun Raphel Arun Raphel [email protected] 0
Entropy Alloy

Prediction of Machining
Characteristics using Artificial
14 Regular G.Ugrasen Vishwa R Surya [email protected] 0
Neural Network in Wire EDM of
Al7075 based In-situ Composite

Synthesis and Characterization of

15 Cu-Fe3Al Composites using Regular Pallabi Bhuyan Pallabi Bhuyan [email protected] 0
Powder Metallurgy Route

The effect of Germanium addition

on mechanical properties& Muna Khethier
16 Regular Muna Khethier Abbass [email protected] 0
microstructure of Cu-Al-Ni Abbass
shape memory alloy

Influences of Energy Input and

Metal Powder Addition on
17 Regular M.O.H. Amuda M.O.H. Amuda [email protected] 0
Carbide Precipitation in AISI 430
Ferritic Stainless Steel Welds

Microstructural Investigation of
18 Ti Coating on Ti6Al4V by Laser Regular Kehinde Sobiyi Kehinde Sobiyi [email protected] 0
Cladding
A review on the effect of creep
and microstructural change under
19 elevated temperature of Ti6Al4V Regular Didier Nyembwe Ochonogor O. F [email protected] 0
alloy for Turbine engine
Application
Recent Research Status on
20 Regular Satish R More Satish R More [email protected] 0
Erosion Wear An Overview

Characterization of spray formed Obula Reddy

21 Regular B.V.R.Reddy [email protected] 0
and cold rolled Al-Pb alloy Kummitha
 Orientation Dependent Work
Hardening Behavior of Cold
22 Regular K. K. Mehta K. K. Mehta [email protected] 0
Rolled and Solution Annealed
Hastelloy C-276 Alloy
Effects of mechanical,
metallurgical and corrosion
23 Regular P. Sathiya K. Kamal Babu psathiya@ nitt.edu 0
properties of cryorolled AA2219-
T87 aluminium alloy
Surface Morphology and Opto-
electronic Properties of
24 Regular B. Hymavathi B. Hymavathi [email protected] 0
Nanostructured Cr doped CdO
Thin Films for Photovoltaics
An Experimental study:
K.Viswanath K.Viswanath
25 Mechanical properties of Cu-Cr- Regular [email protected] 0
Allamraju Allamraju
Zr alloy
Effect of Vanadium addition to
Al-Si alloy on its mechanical,
26 Regular Aakash Kumar Aakash Kumar [email protected] 0
tribological and microstructure
properties

Solar Water Distillation Using

27 Regular Ravi Gugulothu Ravi Gugulothu [email protected] 0
Different Phase Change Materials

Controlling Mechanical
28 Properties of Warm Extruded Regular R.G.Deshpande R.G.Deshpande [email protected] 0
Commercial V-65 Alloy
Influence of Tool Revolving on
Mechanical Properties of Friction
29 Regular Aruri Devaraju P Satish Kumar [email protected] 0
Stir Welded 5083 Aluminum
alloy
Investigation of the effects of the
Machining Parameters on
30 Material Removal Rate using Regular Vishal Parashar Vishal Parashar [email protected] 0
Taguchi method in End Milling of
Steel Grade EN19
 Current Development in
31 Synthesis and Characterization of Regular Nitish Gupta Nitish Gupta [email protected] 0
Nickel Ferrite Nanoparticle

Synthesis Methods of
32 Regular Rajesh Purohit Sunil Kumar [email protected] 0
Mesoporous Silica Materials

Vickers Microindentation
Hardness Studies of DL- [email protected]
33 Regular S. Nalini Jayanthi S. Nalini Jayanthi 0
methionine Doped Copper m
Sulphate (MCS) single crystal

Development of CdZn(SSe)2 thin

34 films by using simple aqueous Regular P. N. Bhosale S. K. Jagadale [email protected] 0
chemical route: Air annealing

Wear Between Ring and Traveler:

A Pin-On-Disc Mapping of Preetkanwal Singh Preetkanwal Singh
35 Regular [email protected] 0
Various Detonation Gun Sprayed Bains Bains
Coatings

Tribological performance of
electroless Ni-(high) P coatings
36 Regular Prasanta Sahoo Sanjib Kundu [email protected] 0
under elevated testing
temperature
Synthesis and Characterization of
Dharmendra K.
37 MIL-101 incorporated with Darco Regular Sanjay K. Singh [email protected] 0
Panchariya
type Activated Charcoal
Surface Modification of Zeolite
38 4A Molecular SievebyPlanetary Regular Debashis Panda Debashis Panda [email protected] 0
Ball milling
Synthesis & Characterization of
Al-Ti-Cr MMC as friction
39 Regular Faisal Ahmed Faisal Ahmed [email protected] 0
material for disc brakes
application

Effect Of Loading Variations On aniketchakrabarty2013@gma

40 Regular A. Chakrabarty A. Chakrabarty 0
Damage Of SA333 C-Mn Steel il.com
 Enhanced removal of methylene
blue dye in aqueous solution
41 Regular H.S. Bhojya Naik M. Vinuth [email protected] 0
using eco-friendly Fe(III)
montmorillonite

Tribochemistry of Sugar Mill

42 Regular Amol Kakade Amol Kakade [email protected] 0
Roller Shaft Materials

Characterization of modified
43 Regular Sivaselvi K Sivaselvi K [email protected] 0
Chitosan thin film

Analysis of Microstructural
Changes in Enhancement of
44 Surface Properties in Sheet Regular Sandeep Rathee Sandeep Rathee [email protected] 0
Forming of Al alloys via Friction
Stir Processing
Effect of quenching medium on
microstructure and hardness of as
45 Regular Sandeep Sandeep [email protected] 0
sintered Fe-Cr-Mo-0.6C and Fe-
Mo-0.6C alloy steel
Combined Slurry and Cavitation
Erosion Resistance of HVOF
46 Regular Amarendra H. J Amarendra H. J [email protected] 0
Thermal Spray Coated Stainless
Steel
Melting of 60Sn40Pb alloyusing
Shashank Lingappa [email protected]
47 microwave energy and its Regular Shashank Lingappa M 0
M om
characterization
Fatigue Analysis of a Panel
Consisting of Window Cutout and PraveenKumar [email protected]
48 Regular S.Pragadheswaran 0
Frames in the Fuselage of a Balguri m
Transport Airframe

Effect of rice husk ash on

49 properties of aluminium alloys: A Regular Srikant Tiwari Srikant Tiwari [email protected] 0
review
 Characterization Of Plywoods
50 Produced By Various Bio- Regular Tanya Buddi Tanya Buddi [email protected] 0
Adhesives
Evaluation of Mechanical and
Wear Properties of Aluminium
51 Regular R. Pramod S. Mohan Kumar [email protected] 0
AA430 Reinforced with SiC and
Mgo
High thermal conductivity mould
insert materials for cooling time
52 Regular K Prashanth Reddy K Prashanth Reddy [email protected] 0
reduction in thermoplastic
injection moulds

Characteristics of Fly Ash in

53 Regular Kaushal Kumar Kaushal Kumar [email protected] 0
Relation of Soil Amendment

Characterization of the
intermetallic compounds in
54 Regular Mukuna P. Mubiayi Mukuna P. Mubiayi [email protected] 0
aluminium and copper friction
stir spot welds
Hot Corrosion behaviour of
Nanostructured Cermet based
55 Coatings Deposited by Different Regular V.N. Shukla Himanshu Saini address:[email protected] 0
Thermal Spray Techniques: A
Review

Prediction of the Performance

56 Regular Somvir Singh Nain Somvir Singh Nain [email protected] 0
Characteristics of WEDM on

Effect of Calcium Hexaboride

Particles on Predicting the Dry
Sliding Tribological Process
57 Regular P.Seenuvasaperumal A. Elayaperumal [email protected] 0
Parameter of Magnesium
Composite Using Grey Relational
Analysis
 Comparison of different
Coagulants for Reduction of saraswatirana1982@rediffmai
58 Regular Saraswati Rana Saraswati Rana 0
COD from Textile industry l.com
wastewater
Bending analysis of laminated
59 stiffened hypar shell roofs with Regular Sarmila Sahoo Puja Basu Chaudhuri [email protected] 0
cutout

Optical studies on vacuum

60 evaporated pentacene thin films Regular C.M. Joseph A. G. Gayathri [email protected] 0
on glass substrates

Tensile Testing of Ultra-Fine

61 Grained Extra Deep Drawing Regular A. K. Sannidhi R. Pratoori [email protected] 0
Steel Sheets
Influence of laser power on the
surfacing microstructures and
62 microhardness properties of Ti- Regular Mutiu F. Erinosho Esther T. Akinlabi [email protected] 0
6Al-4V-Cualloys using the
ytterbium fiber laser

Production and biodegradability

63 Regular M. Bardalai M. Bardalai [email protected] 0
analysis of bael shell pyrolysis oil

An Experimental Approach of
Generation of Micro/Nano Scale
64 Liquid Droplets by Regular P. Rai P. Rai [email protected] 0
Electrohydrodynamic
Atomization (EHDA) Process
Manufacturing and Micro
65 structure study of Al-SiC Regular M.Siva Surya M.Siva Surya [email protected] 0
Functionally graded material

Enhancing mechanical properties

of friction stir welded joints of [email protected]
66 Regular Vikas Upadhyay Vikas Sharma 0
Al-Si-Mg alloy through post weld om
heat treatments
 On State Rheological
67 Characterization of MRF 122EG Regular Vivek Sharma S K Mangal [email protected] 0
Fluid Using Various Techniques

Synthesis And Characterization

Of Graphene-Zinc Oxide
68 Nanocomposite Electrode Regular V.Rajeswari V.Rajeswari [email protected] 0
Material For Supercapacitor
Applications
Critical Study on Rotary
Fluidized bed as a Diesel
69 Regular S.C.Shamkuwar S.C.Shamkuwar [email protected] 0
Particulate Filter using SiC
particles
Green Synthesis of Zinc Oxide
70 Regular A. Clara Dhanemozhi A. Clara Dhanemozhi [email protected] 0
Nanoparticle Using

The Fabrication of Natural Dye

71 Sensitized Solar Cell (Dssc) Regular S. Sathyajothi S. Sathyajothi [email protected] 0
based on Tio2

The Effect of Residual Stress on

72 Fatigue crack growth rate in AISI Regular Amit Prakash Amit Prakash [email protected] 0
304LN Stainless Steel

Damage Detection in Frame

73 Structure Using Piezoelectric Regular Sajal Roy Sajal Roy [email protected] 0
Actuator

Investigation on Reverse
Characteristics of Centrifugal
74 Pump in Turbine Mode: A Regular P. Vasanthakumar P. Vasanthakumar [email protected] 0
Comparative Study by an
Experimentation and Simulation
 Fabrication and Mechanical
properties characterization of
75 Regular Keshav singh Keshav singh [email protected] 0
aluminium alloy LM24/B4C
composites

Characterizationof Hydraulic
Suspension System, on The Basis
76 Regular D. N. Korade Faisal Ahmed Ansari [email protected] 0
of Accumulator Pressure Values
for a Special Purpose Vehicle

Investigation of microstructure
and microhardness in laser [email protected],[email protected]
77 Regular Mamilla Ravi Sankar Woldetinsay G. Jiru 0
surface alloyed aluminium with c.in
TiO2 and SiC powders
Investigation of a Diesel Engine
with Ceramic and platinum
Dr. Hiregoudar Dr. Hiregoudar
78 coated piston using Canola oil, Regular [email protected] 0
Yerrennagoudaru Yerrennagoudaru
Soyabean oil and Palm oil
blended with Ethanol
Effect of Grain
79 refinement ,Modifier and Stirring Regular Jyoti Menghani Shakti Singh [email protected] 0
on properties of A356

Analysis of stress concentration

in isotropic and orthotropic plates
80 Regular Gayathri Tadepalli Gayathri Tadepalli [email protected] 0
with hole under uniformly
distributed loading conditions

A Hybrid Neural Network -

Genetic Algorithm for Prediction [email protected]
81 Regular Lakshmi Kanumuri Lakshmi Kanumuri 0
of Mechanical Properties of ASS- m.
304 at Elevated Temperatures

Characterization of magnetic
abrasive particles based [email protected]
82 Regular M. S. Niranjan M. S. Niranjan 0
Magnetorheological polishing m
fluid
 Growth of Bulk Sodium Acid
Phthalate (NaAP) Crystals for
83 Regular S. Gokul Raj D. Saravanan [email protected] 0
High Frequency Laser Generation
in Nonlinear Optical Applications

Microstructure evolution in
84 Ti6Al4V alloy laser cladded with Regular M.O.H. Amuda M.O.H. Amuda [email protected] 0
Premix Ti+TiB2 powders

Thermal Gravimetric Analysis

Study of Silicoaluminophosphate
bharatkumar_modhera@yaho
85 Synthesized from Non-Aqueous Regular Rupali Jha Rupali Jha 0
o.com
Media for Solar Energy Storage
Material

Characterization of Commercial
[email protected]
86 grade Paraffin wax as Latent heat Regular Ashish Agarwal Ashish Agarwal 0
m
Storage material for Solar dryers

Role of Viscosity in Hydro-

87 Regular R.Uday Kumar Dr.R.Uday Kumar [email protected] 0
forming Process

Investigation of high temperature

88 forming of ASS 304 using Regular B.Balunaik Lade Jayahari [email protected] 0
BARLAT 3-Parameter Model

Formability Analysis of
89 Aluminium Alloy by Erichsen Regular Ajay Kumar Choubey Monika Singh [email protected] 0
Cupping Test Method
Tool Path Planning for
manufacturing of Asymmetric
swagatikamohanty89@gmail.
90 parts by incremental sheet metal Regular Swagatika Mohanty Swagatika Mohanty 0
com
forming by means of Robotic
manipulator
 Study of Deep Drawing Process [email protected]
91 Regular Rashmi Dwivedi Rashmi Dwivedi 0
Parameters m

Thickness Distribution of Extra

92 Deep Drawn steel in stretch Regular R Raman Goud R Raman Goud [email protected] 0
forming at elevated Temperatures

Evaluation of Strain and Strain

93 rates at different stages of Regular P Shailesh P Shailesh [email protected] 0
Superplastic Cone Forming

Springback analysis of Triangular

Cross-sectioned Bar of Linear
94 Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
Work- Hardening Materials under
Torsional Loading

Microstructure, texture and

mechanical properties of hot
95 Regular Premkumar Manda Premkumar Manda [email protected] 0
rolled metastable -titanium alloy
Ti-5Al-3.5Mo-7.2V-3Cr

Residual Stress analysis of Linear

96 Work- Hardening Materials under Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
Torsional Loading

Parametric study on quasi-static

[email protected].
97 crushing behaviour of flanged Regular A. Singh A. Singh 0
ernet.in
tubes under axial loading

Prediction of Structural Behavior

98 of FRP Pressure Vessel by Using Regular Md.Musthak Md.Musthak [email protected] 0
Shear Deformation Theories

Mechanism of Precipitation of
Seyed Ebrahim
99 Carbides during Deep Cryogenic Regular Seyed Ebrahim Vahdat [email protected] 0
Vahdat
Processing in 1.2542 Tool Steel
 Solar Water Distillation using
100 Three Different Phase Change Regular Ravi Gugulothu Ravi Gugulothu [email protected] 0
Materials

State of Art on Solvent Casting

101 Particulate Leaching Method for Regular M.Ravi Sankar Arbind Prasad [email protected] 0
Orthopedic Scaffolds Fabrication

Mechanical Properties and

Stretch Forming Behaviour of
102 Regular Sushanta Kumar Panda Lin Prakash P S [email protected]. 0
Electron Beam Welded Titanium
Sheets of Grade-2 and Grade-5

Strain Hardening Behaviour of

Hot Rolled Annealed Nickel Free
103 Regular R Sri Rama devi R Sri Rama devi rangisetty2498 @gmail.com 0
Nitrogen Based Austenitic
Stainess Steel
Numerical investigations of
fracture parameters for a cracked
104 Regular V.N.Balavignesh Nitin Kotkunde [email protected] 0
hydraulic cylinder barrel and its
redesign
Development of Predictive
Models for Formability Study of
105 Regular Nitin Kotkunde Nitin Kotkunde [email protected] 0
Ti-6Al-4V alloy at Elevated
Temperatures
Review of Processing Maps and
106 Development of Qualitative Regular A. Anitha Lakshmi A. Anitha Lakshmi [email protected] 0
Processing Maps
Study of Limiting Dome Height
and Temperature Distribution in Swadesh Kumar
107 Regular Chadaram Srinivasu [email protected] 0
Warm Forming of ASS304 Using Singh
Finite Element Analysis
Development of Johnson Cook
Swadesh Kumar
108 Model for Zircaloy-4 with Low Regular K Limbadri [email protected] 0
Singh
Oxygen Content
 Effect On Micro-Hardness And
Korimilli Surya Korimilli Surya
109 Residual Stress In Cnc Turning Regular [email protected] 0
Sundara Rao Sundara Rao
Of Aluminium 7075 Alloy

Intelligence model based

Umamaheswara Raju.
110 machining process classification Regular R. Ramesh [email protected] 0
R. S
and performance estimation

Determining Impact of Crack

Width on the Repairing of Crack Seyed Ebrahim
111 Regular Rohollah Askarpour [email protected] 0
on the Surface of Carbon Steel by Vahdat
Welding Methods

Prediction Of Natural Frequency

112 Regular Kalapala Prasad Kalapala Prasad [email protected] 0
Of Gas Turbine Disc

Defect formation analysis of

113 Friction Stir welded Magnesium Regular Piyush Gulati Piyush Gulati [email protected] 0
AZ31B alloy
Resultant Surface Roughness
Aluminiumand
114 Hastelloy C-276 Using Wire Regular K.Baburaja K.Baburaja [email protected] 0
Electro Discharge Machining

Experimental Investigation and

Estimation of Surface Roughness
using ANN, GMDH & MRA Chakradhar
115 Regular Chakradhar Bandapalli [email protected] 0
models in High Speed Micro End Bandapalli
Milling of Titanium Alloy
(Grade-5)

Reliability Analysis and Linear

Regression Model with
116 Multilayer Perceptron of Sea Regular N. S. Pawar N. S. Pawar [email protected] 0
Sand as an Abrasive in Erosion
Process
 Lean Integrated Management
Systems in MSME
117 Reasons, Advantages and Regular Ajay D Jewalikar Ajay D Jewalikar [email protected] 0
Barriers on Implementation

A Review on Enhancement of
118 Heat Transfer in Heat Exchanger Regular Kavya Akkiraju Ravi Gugulothu [email protected] 0
with Different Inserts

A Review on Enhancement of
119 Regular Ravi Gugulothu Ravi Gugulothu [email protected] 0
Heat Transfer Techniques

Experimental Investigation On
Turning Of Turbine Blade Madan Mohan Reddy Madan Mohan Reddy
120 Regular [email protected] 0
Material AISI 410 Under Nune Nune
Minimum Quantity Cutting Fluid

Experimental studies on material

removal rate, tool wear rate and
121 surface properties of machined Regular Gurmail Singh Gurpreet Singh [email protected] 0
surface by powder mixed electric
discharge machining

Organ Printing With Life Cells: A Santosh Kumar Santosh Kumar

122 Regular [email protected] 0
Review Malyala Malyala

Design&manufacturing of spiral
intake manifold to improve
123 Regular A.Manmadhachary A. Manmadhachary [email protected] 0
Volument efficiency of injection
diesel engine byAM process

State of art : Piezoelectric K.Viswanath K.Viswanath

124 Regular [email protected] 0
Vibration Energy Harvesters Allamraju Allamraju
 Condition Monitoring Of A 3-
Induction Motor By Vibration
125 Regular S,Sudhakar. I Sudhakar. I [email protected] 0
Spectrum Anaylsis Using Fft
Analyser- A Case Study

Application of Big Data in

126 Regular Ankit Singh Ankit Singh [email protected] 0
Supply Chain Management

Effect of Post Weld Toe

127 Treatments on Fatigue Life of Regular Vikrant Garud Vikrant Garud [email protected] 0
Welded Structures using FEA
Steady State Analysis of Vacuum
128 Regular Akash S.Bage Akash S.Bage [email protected] 0
Chamber
Manufacturing of Patient specific
Santosh Kumar Santosh Kumar
129 AM medical models for Complex Regular [email protected] 0
Malyala Malyala
Surgeries

Method of stir casting of

130 Aluminum metal matrix Regular Ulhas .K. Annigeria Ulhas .K. Annigeria [email protected] 0
Composites: A review

Failure of Hot Forging Dies An

131 Regular Subhash Chander Subhash Chander [email protected] 0
Updated Perspective

Effect of Cryogenic Treatment of

Tool Electrode on the Machining
132 Performance and Surface Finish Regular Rajesh Choudhary Rajesh Choudhary [email protected] 0
during Electrical Discharge
Machining of Hastelloy C-4

Comparison of Straight Line to

133 Conformal Cooling Channel in Regular Venkatesh G Venkatesh G [email protected] 0
Injection Molding
 Dependence of Rate of Heat Flow
134 in Graphene on Number of Regular Dhiman Kumar Das Dhiman Kumar Das [email protected] 0
Layers

Experimental Investigations of
Surface Roughness of Inconel
135 Regular Sunil Kumar Sunil Kumar [email protected] 0
718 under different Machining
Conditions

Effect of Mechanical Properties

136 with Addition of Molasses and Regular P. SrinivasaRao P. SrinivasaRao [email protected] 0
FlyAsh in Green SandMoulding

Effect of PWHT on the Hardness

137 and fractured microstructure of Regular M. Bala Chennaiah M. Bala [email protected] 0
IS-103Cr1 welded joint

Selection of tool and work piece

combination using Multiple
138 Attribute Decision Making Regular Mukesh Taka Mukesh Taka [email protected] 0
Methods for Computer Numerical
Control turning operation

Experimental Investigation on
139 Innovative Modification of Aqua Regular Mehta Nirav Mehta Nirav [email protected] 0
Silencer
An approach for increasing the
micro-hardness in electrical
140 discharge machining by adding Regular S.Tripathy S.Tripathy [email protected] 0
conductive powder to the
dielectric
 Evaluation and Impacts of Tool
Profile and Rotational Speed on A. Nagamalleswara
141 Regular L. Srinivas Naik [email protected] 0
Mechanical Properties of Friction rao
Stir Welded Copper 2200 Alloy

Applications of LASER
142 Inspection for Precision Regular Satyanarayana A. Satyanarayana A. [email protected] 0
Components

Methods for Evaluation of

143 Regular Manoj Kumar Gupta Manoj Kumar Gupta [email protected] 0
Radiation View Factor: A Review

Simulation Of Shot Peening

144 Regular Rajesh Purohit Rajesh Purohit [email protected] 0
Process
Techniques To Improveweld
Penetration In TIG Welding Akhilesh Kumar
145 Regular Akhilesh Kumar Singh [email protected] 0
(A Review) Singh

Examination of Joint Integrity in

parallel plate configuration of
146 Regular Bir Bahadur Sherpa Bir Bahadur Sherpa [email protected] 0
explosive welded SS-Al
combination
Metallurgical Aspects and
Optimisation of Yb: YAG Laser Deepan Bharathi
147 Regular Sathiya.P [email protected] 0
Welded NiTinol Shape Memory Kannan.T
Alloy
Understanding the Fixture Design
148 for friction stir welding research Regular L.V. Kamble L.V. Kamble [email protected] 0
experiments
Study of surface morphology on
149 micro machined surfaces of AISI Regular N.Aravindan U Ashok kumar [email protected] 0
316 by Die Sinker EDM
 Computational Study of Effect of
Varying Properties of Carbon
Dioxide on Convective Heat
150 Regular Deepak Sharma Deepak Sharma [email protected] 0
Transfer in Sub Channels Flow at
a Pressure Just Above the Critical
Value

Friction Welding of Semi-Solid

151 Regular C. Meengam C. Meengam [email protected] 0
Metal 7075 Aluminum Alloy

Effects of axial force on the

mechanical properties of AZ80A
152 Regular Jaiganesh V Sevvel P [email protected] 0
Mg alloy during friction stir
welding
Experimental and Numerical
investigation on enhancement in
153 thermal characteristics of Sintered Regular B Ch Nookaraju B Ch Nookaraju [email protected] 0
Copper wick Heat pipe using
deionized water as fluid

Experimental Study on
Performance, Combustion and
154 Emissions of Diesel Engine with Regular U.S.Jyothi U.S.Jyothia [email protected] 0
Re-entrant Combustion Chamber
Design

Fish Scale Derived

Hydroxyapatite reinforced Poly
(Lactic acid) Polymeric Bio-
155 Regular M.Ravi Sankar Arbind Prasad [email protected] 0
films: Possibilities for
Sealing/locking the Internal
Fixation Devices

Study on temperature distribution

156 during Friction Stir Welding of Regular J P Misra S Verma [email protected] 0
6082 aluminum alloy

Experimental investigation of end

157 Regular Prashant D.Kamble Shilpa B.Saharea [email protected] 0
milling operation on Al2024
 Crack Detection In Cantilever
158 Shaft Beam Using Natural Regular Dinesh Satpute Dinesh Satpute [email protected] 0
Frequency
Investigation of Machining
159 Parameter in EDM of High Regular B.Koteswararao B.Koteswararao [email protected] 0
Carbon Steel Alloy (EN31)
Product Quality as Factors and
Measures for New Product
160 Regular Sudeshna Roy Sudeshna Roy [email protected] 0
Development Success in Indian
Manufacturing Industries

Experimental study on the effect

of welding parameters and tool
161 Regular M.S.Srinivasa Rao M.S.Srinivasa Rao [email protected] 0
pin profiles on the IS: 65032
aluminum alloy FSW joints

Influence of specially designed

high-stiffness ball burnishing tool
162 Regular A.S. Maheshwari A.S. Maheshwaria [email protected] 0
on surface quality of Titanium
alloy
Topology optimization using
solid isotropic material with
163 Regular L. Siva Rama Krishna L. Siva Rama Krishna [email protected] 0
penalization technique for
additive manufacturing

A Brief Review on injection

164 Regular Gurjeet Singh Gurjeet Singh gurjeet123singh@gmail. 0
moulding manufacturing process

Parametric Optimization in Wire

Electrical Discharge Machining
165 Regular Siva Prasad Arikatla Siva Prasad Arikatla [email protected] 0
of Titanium Alloy Using
Response Surface Methodology

A heuristic approach based on

Euclidean distance matrix for the [email protected]
166 Regular Manash Hazarika Dipak Laha 0
machine-part cell formation om
problem
 Multipass Welding On Inconel
Vemanaboina Vemanaboina
167 Material With Pulsed Current Gas Regular [email protected] 0
Harinadh Harinadh
Tungsten Arc Welding
TOLERANCE STACK UP
168 ANALYSIS OF A Regular A. K. Sahani A. K. Sahani [email protected] 0
MECHANICAL ASSEMBLY
A Modified Hybrid Similarity
Coefficient Based Method for
169 Solving the Cell Formation Regular K.V.Durga Rajesh K.V.Durga Rajesh [email protected] 0
Problem in Cellular
Manufacturing System
Rheological behaviour of
170 Magnetorheological polishing Regular Saraswathamma. K Saraswathamma. K [email protected] 0
fluid for Si polishing
Abrasive Wear Behavior of
Surface Hardfacing
171 on Propeller ShaftsAISI Regular S. Sitthipong S. Sitthipong [email protected] 0
4140Alloy Steel

Surface Integrity Characteristics

in Wire Electrical Discharge
172 Regular Arkanti Krishnaiah Siva Prasad Arikatla [email protected] 0
Machining of Titanium Alloy
during Main cut and Trim cuts

Critical Success Factors: A

173 TOPSIS approach to increase Regular V.S. SenthilKumar K.P.Subramaniya [email protected] 0
Agility Level in a Textile Industry

Drilling of AISI 304 Stainless

Steel under Liquid Nitrogen
174 Regular Pradeep Kumar M Pradeep Kumar M [email protected] 0
Cooling: A Comparison with
Flood Cooling

Online Monitoring of Metal

M.Sivaramakrishnaia
175 cutting of Inconel600 with Al2O3 Regular M.Sivaramakrishnaiah [email protected] 0
h
coated carbide tools
 Design and Manufacturing
176 Aspects of Magneto-rheological Regular K. Hema Latha K. Hema Latha [email protected] 0
Fluid (MRF) Clutch
Study Of Wear In Chrome Plated
Cylinder Liner In Two Stroke
177 Marine Diesel Engine Lubricated Regular N.Jayakumar N.Jayakumar [email protected] 0
By Hans Jensen Swirl Injection
Principle

Study of Boiler Maintenance for

Enhanced Reliability of System
178 Regular Shubham Agarwal Shubham Agarwal [email protected] 0
A Review

Application of Similarity
Measure of Fuzzy Soft Sets in
179 Regular Ajay Verma Nisha Singhal [email protected] 0
Selection of Manufacturing
Method

Springback Analysis of Elliptical

Sectioned bar of Non linear
180 Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
Work-Hardening Materials under
Torsional Loading

Material Analysis for Blade of a

Mixed Flow Pump Impeller
181 Regular Kaushik Kumar Divya Zindani [email protected] 0
Designed Through Mean Stream
Line Method
Dynamic Analysis of Flex Seal of
182 Regular Eswara Kumar A. Eswara Kumar A. [email protected] 0
Solid Rocket Motor Nozzle
Modeling of dimensional
accuracy in precision investment
183 Regular Rupinder Singh Rupinder Singh [email protected] 0
casting using Buckinghams Pi
approach
An investigation on the effects of
the various techniques over the Prashant Kumar
184 Regular Prashant Kumar Singh [email protected] 0
performance and durability of Singh
polymer gears
 Modeling of Bubbling Fluidized
185 Bed Combustor Based on Regular Mohit Gaba Mohit Gaba [email protected] 0
Biomass & Co-firing
Comparison of ANN and
Regression Analysis for
Predicting the Water Absorption [email protected]
186 Regular Satish Pujari Satish Pujari 0
Behaviour of Jute and Banana om
Fiber Reinforced Epoxy
composites

Development of 5 DOF Robot

187 Arm -Gripper for sorting and Regular Rahul Basu Rahul Basu [email protected] 0
investigating RTM Concepts

Applications of TLBO algorithm

188 on various manufacturing Regular Atul Tiwari Atul Tiwari [email protected] 0
processes: AReview

Modal Analysis of Rectangular

B.C.Raghu Kumar
189 Plate with Central Hole Subjected Regular M.L.Pavan Kishore [email protected] 0
Reddy
To Various End Conditions

Characterization and
Optimization of TIG welded
190 Regular Sathiya.P Chellappan.M [email protected] 0
supermartensitic stainless steel
using TOPSIS
Experimental Study and
Mathematical Modeling for
191 Regular Sushant Upadhyaya Ekta Chaturvedi [email protected] 0
Extrusion using High Density
Polyethylene
Monolithic compliant slider crank
192 mechanism for motion Regular Sujit Pardeshi Sujit Pardeshi [email protected] 0
amplification
Theoretical modeling of
mechanical properties of woven
193 Regular Shrikant S. Shinde Shrikant S. Shinde [email protected] 0
jutefiber reinforced
polyurethanecomposites
 Dynamic Response of circular , V. P. Singha Radha
194 Regular J. P. Dwivedi :[email protected] 0
tunnel under Elastic medium Krisna Lal

Design and Analysis of

Compliant Micro-gripper Using
195 Regular Rushikesh S. Joshi Rushikesh S. Joshi [email protected] 0
Pseudo Rigid Body Model
(PRBM
Modeling of Process Parameters
of Gelcast Fused Silica Ceramics
196 Regular Kishore Kumar Kandi Kishore Kumar Kandi [email protected] 0
using Response Surface
Methodology

Harmonic Analysis of Al/Al2O3

197 and Ti-6Al-4V/Aluminium oxide Regular Prashant Sharma Prashant Sharma [email protected] 0
Functionally Graded Plate

Review on the Detection of

198 Adulteration in Fuels through Regular Naga Mani Vimal Babu [email protected] 0
Computational Techniques

Train Rolling Stock Intelligent

199 Regular P.V.V.Kishore P.V.V.Kishor [email protected] 0
Monitoring with Computer Vision

A Novel Design & Fabrication of

Energy Generating Oscillatory
200 Regular G.RameshKumar S.Yathavan [email protected] 0
Swing A Play way Technique
for Public Parks
Addressing the Agile
Manufacturing Impediments
201 Regular Srikanta Routroy Pavan Kumar Potdar [email protected] 0
using Interpretive Structural
Modeling
Review on modeling and
optimization Electrical discharge
202 Regular Manish Gangil Manish Gangil [email protected] 0
machining process using modern
Techniques
 Optimization of Electrical
Resistance Spot Welding and
203 Comparison with Friction Stir Regular R.Karthikeyan R.Karthikeyan [email protected] 0
Spot Welding of AA2024-T3
Aluminum Alloy Joints

Integrating Principal Component

Analysis, Fuzzy Linguistic
204 Reasoning and Taguchi Regular Kumar Abhishek Kumar Abhishek [email protected] 0
Philosophy for Quality-
Productivity Optimization
Performance Evaluation of
205 Manipulators with Links of Regular B. Naveen B. Naveena [email protected] 0
Different Cross Sections
Analysis of Optimized Wind
206 Turbine Failure Using Regular M. Ramachandran Shatjit Yadav [email protected] 0
Computational Fluid Dynamics
Comparative Optimization Study
On Vehicle Suspension
207 Regular M.B.S.Sreekar Reddy M.B.S.Sreekar Reddy [email protected]. 0
Parameters For Rider Comfort
Based On RSM And GA
Fuzzy prediction of slurry erosive
behavior of cobalt based clad
208 Regular Srinath M S Srinath M S [email protected] 0
developed through microwave
energy
Optimization of Drilling
Characteristics using Grey
209 Relational Analysis (GRA) in Regular Akhil K.T Akhil K.T [email protected] 0
Glass Fiber Reinforced Polymer
(GFRP)
Structural Performance
Assessment of a Chrysler Neon
210 Regular Kiran Kumar Dama Kiran Kumar Dama [email protected] 0
Compact Passenger Vehicle by
Numerical Methods
Optimization of Various Design
211 Parameters for EN45A Flat Leaf Regular Krishan Kumar Krishan Kumar [email protected] 0
Spring
 Multi Objective Knowledgebase
Concept Design Methodology of
212 Automotive Space Frame Regular Kiran Kumar Dama Kiran Kumar Dama [email protected] 0
Structures for Crashworthinessby
Numerical Methods

Optimization and influence of

process parameters on surface
213 Regular M. Venkata Ramana M. Venkata Ramana [email protected] 0
roughness in turning of titanium
alloy

Optimization of Die casting

214 process based on Taguchi Regular Anil Kumar Birru K.Ch. Apparaoa [email protected] 0
approach

Image-based software solutions

215 for advanced materials processing Regular Yash Agarwal Yash Agarwal [email protected] 0
and characterization

Non-destructive residual stress

analysis and microstructural
216 Regular Mutiu F. Erinosho Mutiu F. Erinosho [email protected], 0
behaviour of laser deposited
titanium and copper alloy

Effect of Aging Time and Aging

Temperature on Mechanical
217 Properties of 333 Aluminum alloy Regular Vinod M. Nangare Vinod M. Nangare [email protected]. 0
by Neural Network and Response
Surface Methodology

Study of wear behavior of Ni-P-

218 TiO2 composite coatings by Regular Prasanna Gadhari Prasanna Gadhari [email protected] 0
optimizing coating parameters
 Process parameter optimization of
die-sinking EDM on Titanium
219 Regular Vijay Verma Vijay Verma [email protected] 0
grade V alloy (Ti6Al4V) using
full factorial design approach

Process modeling of gelcast

Gurabvaiah Gurabvaiah
220 Si3N4ceramics using multi gene Regular [email protected] 0
Punugupati Punugupati
genetic programming
Effect of Different Double
Glazing Window Combinations
221 on Heat gain in Buildings for Regular Saboor Shaik KiranKumar Gorantla [email protected] 0
Passive Cooling in Various
Climatic Regions of India

Shape Optimization And Weight

Reduction Of Seat Structure For
222 Regular A P Khode A P Khode [email protected] 0
Wheeled Armoured Amphibious
Combat Vehicle

Analytic Hierarchy Process

223 Methodologyfor Criticality Analysis of Regular
Thermal PowerA.K.
PlantBewoor
Equipments H.P. Jagtap [email protected] 0

uation of Optimum 224

Turning Process of Process Parameters Using DOE
Regular
and PCA Taguchi
D.Sreeramulu
Method S.Krishna Madhavi [email protected] 0

RSM and Fuzzy logic approaches

for predicting the surface rajesh_bhuyan001@rediffmai
225 Regular R. K. Bhuyan R. K. Bhuyan 0
roughness during EDM of Al- l.com
SiCp MMC
Rheological study of Cu-Zn
Hybrid Newtonian Nanofluids: Sandeep Kumar Sandeep Kumar
226 Regular [email protected] 0
Experimental data and modelling Mechiri Mechiri
using neural network

Modeling of flow stress of

[email protected]
227 AA6061 under hot compression Regular S. K. Rajput Madhur Chandra Dixit 0
m
using artificial neural network
 Multi-Response Optimization of
Fused Deposition Modelling
Process Parameters of ABS Using
228 Regular Manu Srivastava Manu Srivastava [email protected] 0
Response Surface Methodology
(RSM)-Based Desirability
Analysis

Optimization of Friction Stir

229 Processing Parameters for 60/40 Regular Shailesh N. Pandya Kamlesh Meena [email protected] 0
Brass using Taguchi Method

Multi-performance optimization
230 of micro-EDM drilling process of Regular Raju B. Bhosle Raju B. Bhosle :[email protected] 0
Inconel 600 alloy

Optimum Material Selection to

231 Prosthetic Leg through Intelligent Regular Y.KalyanChakravarthy Y.KalyanChakravarthy [email protected] 0
Interface of RSM and FEA

Modeling and Analysis of

Mechanical Properties of
Aluminium Alloy (A413)
Reinforced with Boron Carbide soundararajan.mtech@gmail.
232 Regular R.Soundararajan R.Soundararajan 0
(B4C) Processed Through com
Squeeze Casting Process Using
Artificial Neural Network Model
and Statistical Technique

Optimisation of Process
Parameters for Gas Tungsten Arc
233 Regular Arun Kumar Srirangan Arun Kumar Srirangan [email protected] 0
Welding of Incoloy 800HT Using
TOPSIS

Optimization of EDM Process

234 parameters in Machining of 17-4 Regular Chandramouli S. Chandramouli S. [email protected] 0
PH Steel using Taguchi Method
 Modeling and optimization of
235 electrical discharge machining Regular ManishGangil ManishGangil [email protected] 0
processusing RSM:Areview
Surface Characterization and
Multi-response optimization of sasmeetatripathy@soaunivers
236 Regular S.Tripathy S.Tripathy 0
EDM process parameters using ity.ac.in
powder mixed dielectric
Study on Ni-based super
alloyusing cryogenic treated [email protected].
237 Regular Ashish Goyal Ashish Goyal 0
electrode by Taguchi edu
methodology

ation of turning parameters

238 considering spindle vibration by HybridRegular
Taguchi Principal
Prashantcomponent
D. Kambleanalysis
Prashant
(HTPCA)
D. Kamble [email protected] 0

Fault detection analysis in rolling

239 Regular Pankaj Gupta Pankaj Gupta [email protected] 0
element bearing: A review

Optimization ofWear
Performance of Castor Oil based [email protected]
240 Regular Amit Suhane Amit Suhane 0
Lubricant using Taguchi n
Technique

Optimization of process
parameters during wire electrical Stephan Thangaiah I
241 Regular Saravanan Stephan Thangaiah I Sd 0
discharge machining of Ti Gr 2 Sd
for improving corner accuracy

Analysis of Forces during Hard

242 Turning of AISI 52100 Steel Regular B. Ravi Sankar B. Ravi Sankar [email protected] 0
Using Taguchi Method
Optimization of Process
243 Parameters of Shot Peening Regular Rajesh Purohit Rajesh Purohit [email protected] 0
Using ABQU
Bacteria Foraging Optimization
244 Algorithm for Robotic Cell Regular Arindam Majumder Arindam Majumder [email protected] 0
Scheduling Problem
 Multi-Objective Optimization of
Wire Electrical Discharge
245 Regular Anshuman Kumar Anshuman Kumar [email protected] 0
Machining Process Parameterson
Inconel 718

Taguchi based optimization of

246 process parameters in orthogonal Regular GHV Prasad Babu GHV Prasad Babu [email protected] 0
turn milling of ASTM B139

Multi-Response Optimization On
En19 Steel Using Grey Relational
247 Regular M.Siva Surya M.Siva Surya M.Siva Suryaa 0
Analysis Through Dry & Wet
Machining

An Investigation on RTM Process

Parameters and
Kundavarapu Kundavarapu
248 their Influence on Impact Failure Regular [email protected] 0
Vengalrao Vengalrao
Behavior of FRP Laminates

Prediction of Effect of Process

Parameters on Friction Stir
249 Welded Joints ofdissimilar Regular P.Hema P.Hema [email protected] 0
Aluminium Alloy AA2014 &
AA6061 Using Taper Pin Profile

Investigations on drilling process

Syed Mohibuddin Syed Mohibuddin
250 parameters of Hybrid Composites Regular [email protected] 0
Bukhari Bukhari
with different stacking sequence

NSGA-II Approach for Multi-

Objective Optimization of Wire
251 Regular Anshuman Kumar Anshuman Kumar [email protected] 0
Electrical Discharge Machining
Process Parameter on Inconel 718
 Optimization of Controllable
Turning Parameters for High
252 Regular Dr. B.Satyanarayana Dr. B.Satyanarayana [email protected] 0
Speed Dry Machining of Super
Alloy: FEA and Experimentation

Parametric Optimization of Gas

Metal Arc Welding Process by
253 Regular Ramesh Rudrapati Nabendu Ghosh [email protected] 0
using Taguchi method on Ferritic
Stainless Steel AISI409

Impact of Fuel Injection Pressure

and Compression Ratio on
Performance and Emission
254 Regular K.Srinivas K.Srinivas [email protected] 0
Characteristics of VCR CI Engine
Fueled With Palm Kernel Oil-
Eucalyptus Oil Blends

Multi Response Optimization of

Powder Additive Mixed
255 Regular Pallavi Chaudhury Pallavi Chaudhury [email protected] 0
Electrical Discharge Machining
by Taguchi Analysis
Experimental Investigation of
Influence of Process Parameters
256 Regular T Singh T Singh [email protected] 0
on MRR during WEDM of
Al6063 alloy

Optimization of Machining
Parameters for surface roughness Mr. K. Someswara Mr. K. Someswara
257 Regular [email protected] 0
on turning of Niobium alloy C- Rao Rao
103 by using RSM

Analyzing a manufacturers
258 returns from Regular Srikanta Routroy C V Sunil Kumar [email protected] 0
supplier development programs
 A Comparative Evaluation of GA
259 and SA TSP in a Supply Chain Regular T Srinivas Rao T Srinivas Rao [email protected] 0
Network

Development of Modular
260 Integration Framework between Regular B. N. Prashanth B. N. Prashanth [email protected] 0
PLM and ERP Systems

Optimization of Key Process

Parameters on Electro Chemical
261 Honing (ECH) of External Regular P. Sudhakar Rao P. Sudhakar Rao [email protected] 0
Cylindrical Surfaces of Titanium
alloy Ti 6Al 4V

Effect of Material Mismatch on Balakrishna Murthy [email protected]

262 Regular Prakash D 0
Static behavior of Flex Seal V m

On the Influence of Nanoporous

Layer Fabricated by PMEDM on
263 -Ti Implant: Biological and Regular Chander Prakash [email protected] 0
Computational Evaluation of
Bone- Implant Interface
H. K. Kansal
Computational Fluid Flow
264 Analysis of Base Valve for Twin Regular Kaushik Kumar Dheeman Bhuyan [email protected] 0
Tube Shock Absorbers
Experimental Investigations On
The Performance Of A Solar
265 Regular P.Sarathkumar P.Sarathkumar [email protected] 0
Pond By Using Encapsulated
Pcm With Nanoparticles

Stress Analysis for an infinite

266 Regular Soni Kumari Soni Kumari [email protected] 0
plate with circular holes
 Combustion analysis of modified
inverted M type piston for
Hiregoudar Hiregoudar
267 diesel engine with platinum Regular [email protected] 0
Yerrennagoudaru Yerrennagoudaru
coating and without coating by
using CFD
CFD Analysis of a Helically
Sudheer Prem Kumar Vijaya Kumar Reddy
268 Coiled Tube in Tube Heat Regular [email protected] 0
B K
Exchanger
Residual Stresses during Hard
Turning of AISI 52100 Steel:
269 Regular Sujit Pawar Sujit Pawar [email protected] 0
Numerical Modelling with
Experimental Validation
Investigation of Damage in Small
270 Deformation in Hot Rolling Regular Shailendra Dwivedi Shailendra Dwivedi [email protected] 0
Process Using FEM
Dimensional analysis of PZT-5H K.Viswanath K.Viswanath
272 Regular [email protected] 0
transducers Allamraju Allamraju

Weight optimization and Finite

Element Analysis of Composite
P.Satheesh Kumar P.Satheesh Kumar
273 automotive drive shaft Regular [email protected] 0
Reddy Reddya
for Maximum Stiffness

Influence of Induced Residual

274 Stresses on Fatigue Performance Regular Anil Kumar S Anil Kumar S [email protected] 0
of Cold Expanded Fastener Holes

A Vibration Analysis of a 6 Axis

Industrial Robot
275 Regular Supriya Sahu Supriya Sahua [email protected] 0
Using FEA

Formability Analysis at Different

Friction Conditions in Axis-
276 Regular Geeta Agnihotri Chandra Pal Singh [email protected] 0
Symmetric Deep Drawing
Process
 Finite element analysis of die
277 offsetin two-turn incremental Regular Pintu Kumar Pintu Kumar [email protected] 0
ECAP
Analysis of Ride comfort and
278 Road holding of Quarter car Regular Trupti P. Phalke Trupti P. Phalke [email protected] 0
model by SIMULINK

Creep Analysis in Functionally

Graded Rotating Disc Using
279 Regular V. K. Gupt K. Khanna [email protected] 0
Tresca Criterion and Comparison
with Von-Mises Criterion

Investigation on multi-layer
selective inhibition sintering Balasubramanian Arunkumar
280 Regular [email protected] 0
process using finite element Esakki Ponnambalam
analysis

Consequence of Cutting
281 Parameters on Residual Stresses Regular Sagar Bhopale Sagar Bhopale [email protected] 0
of AISI 1018 Cold Rolled Steel

Analysis of railway wheel to

study crack initiation due to
282 Regular NayanChandak NayanChandak [email protected] 0
thermal loading and calculating
life cycle
Finite Element Simulation of
283 Low Velocity Impact Damage in Regular K. R. Jagtap K. R. Jagtap [email protected] 0
Composite Laminates

Fatigue failure prediction in spur

284 Regular Paras Kumar Paras Kumar [email protected] 0
gear pair using AGMA approach

Parametric Analysis Of Flexure

285 Regular Amit Jomde Amit Jomde [email protected] 0
Bearing For Linear Compressor

Free vibration analysis of smart Yashavantha kumar G

286 Regular K M Sathish kumar [email protected] 0
composite beam A
 Analysis of CFRP Flight Interface
287 Regular Sagar Ingle Sagar Ingle [email protected] 0
Brackets under Shock Loads

Finite Element Analysis

288 ofCellular Foam Core Sandwich Regular Rakesh.Potluri Rakesh.Potluri [email protected] 0
Structures

Analysis of Die Angle in Deep

289 Regular Ajay Kumar Choubey Ajay Kumar Choubey
[email protected] 0
Drawing Process Using FEM

Estimation of time of tracking for

designed absorber used in
290 domestic solar desalination Regular A.B.Auti A.B.Auti [email protected] 0
system using experimental and
Finite Element analysis (ANSYS)

Comparative Analysis of
Performance of Hydro-
291 mechanical Steering System and Regular K.R.Jagtapa= Shaikh Naveed Ahmed [email protected] 0
Ideal Steering System of the SPT
trailer

CFD Study on Emergency Core

Cooling of Hot Vertical Nuclear
292 Regular Ajoy Debbarma Ajoy Debbarma [email protected] 0
Fuel Rod Bundle by Jet
Impingement

Finite Element Simulation of

293 Pure Aluminum Processed by Regular S Surendarnath S Surendarnath [email protected] 0
ECAP Using New Die Design

Low Cycle Fatigue Performance

294 Regular Bimal Das Bimal Das [email protected] 0
Evaluation of TMT rebar

SPH High Velocity Impact

295 Analysis-Influence of Bird Shape Regular Sd. Abdul Kalam Sd. Abdul Kalama [email protected] 0
on Rigid Flat Plate
 Analysis Of Wind Turbine Blade
Having I Shaped Spar Using Both
296 Regular Tiju .T. Thomas Tiju .T. Thomasa [email protected] 0
Epoxy Fiber And Carbon Fiber
Using FEM

Non Conventional Specimens

FEA and Exergy Analysis Effects
297 Regular Santosh Sanodiya Santosh Sanodiya [email protected] 0
of Geometrical Parameters in
Ring Compression Test

Thermal Analysis for Conformal

298 Regular Venkatesh G Venkatesh G [email protected] 0
Cooling Channel

FE Analysis of Impact on
Kevlar/Epoxy Laminates with
299 Regular Rahul S. Sikarwar Rahul S. Sikarwar [email protected] 0
Different Orientations and
Thicknesses
COMPUTATIONAL
INVESTIGATION OF MULTI-
300 STRUT INJECTION OF Regular Gautam Choubey Gautam Choubey [email protected] 0
HYDROGEN IN A SCRAMJET
COMBUSTOR

Flow CFD Analysis of 2D

Transient Melt flow from crucible
on
301 Regular M.Swaroopa M.Swaroopa [email protected] 0
to the rotating wheel in Planar
Melt Spinning Process

Evaluation of Parametric
Significance in Friction Welding
A. Chennakesava A. Chennakesava
302 Process of AA1100 and Zr705 Regular [email protected] 0
Reddy Reddy
Alloy using Finite Element
Analysis
 SCF in Isotopic & Orthotropic
303 Regular Kanak Kalita Nandit Jadvani : [email protected] 0
Plates Part I: Uniaxial Load

SCF in Isotopic & Orthotropic

304 Regular Kanak Kalitav Kanak Kalita [email protected] 0
Plates Part II: Biaxial Load

Synthesis and characterization of

mechanical, tribological and
305 micro structural behaviour of Al Regular K.K.S.Mer Amit Raturi [email protected] 0
7075 matrix reinforced with nano
Al2O3 particles

Vibration Analysis & Condition

Monitoring for Rotating
306 Machines: Regular P.Rajput Manish Vishwakarma [email protected] 0
A Review

Finite Element Analysis of

Rectangular Defects in Inspection
307 Regular Sorabh Sorabh [email protected] 0
of Steel Pipelines using Magnetic
Flux Leakage Technique

Springback analysis of Triangular

Cross-sectioned Bar of Non-
308 Linear Work- Hardening Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
Materials under Torsional
Loading
Modal Analysis of PZT Discs for
K.Viswanath K.Viswanath
309 Uniaxial Impact Loaded Energy Regular [email protected] 0
Allamraju Allamraju
Harvesters
 Analysis of Machining Behavior
of Al/A206-Al2O3 Metal Matrix
310 Regular Vishal Parashar Vishal Parashar :[email protected] 0
Composite Using End Milling
Process

Experimental Study and

Comparison with the
311 Computational Study on Cooling Regular Sandeep Koundinyaa Sandeep Koundinyaa [email protected] 0
of PV Solar Panel Using Finned
Heat Pipe Technology

CFD Analysis of Multi turn

312 Regular P.Bhramara J.Venkata suresh [email protected] 0
Pulsating Heat pipe

Experimental and Simulation

313 Regular Akhilendra Singh Pankaj Kumar [email protected] 0
Study of AA5754 Tearing Energy

Review and Study of Effect of

Water Contaminants in
314 Regular Akhilesh Soni Akhilesh Soni [email protected] 0
Lubrication in Ball Bearing
through Vibration Analyses
Investigation and Testing of
Mechanical Properties of Al-
[email protected]
315 Nano SiC Composites through Regular Gaurav Bajpai Gaurav Bajpai 0
m,
Cold Isostatic Compaction
Process
Nano composite film Based on
316 Conducting Polymer, SnO2 and Regular Rajeev Arora Rajeev Arora [email protected] 0
PVA

Studies on Natural/Glass Fiber

317 Reinforced Polymer Hybrid Regular M RSanjay M RSanjay [email protected] 0
Composites:An Evolution
 Development and Analysis of
Epoxy/nano SiO2 Polymer
318 Matrix Composite fabricated by Regular Anisha Christy Anisha Christy [email protected] 0
Ultrasonic Vibration assisted
Processing

An Overview on Mechanical
319 Property Evaluation of Natural Regular Arpitha.G.R Arpitha.G.R [email protected] 0
Fiber Reinforced Polymers

Optimization of MRR, Surface

Roughness, and Maximum Tool-
320 Regular Kumar Abhishek Kumar Abhishek [email protected] 0
Tip Temperature during
Machining of CFRP Composites

Mechanical Properties of Al2O3

Reinforced Cast and Hot
321 Regular Ghanaraja.S Ghanaraja.S [email protected] 0
Extruded Al based Metal Matrix
Composites

Experimental investigation into

322 the effect of noise and damping Regular Atul sharma Atul sharma [email protected] 0
using composite spur gear

Fabrication and characterisation

of Al2O3/aluminium alloy 6061 Bhaskar Chandra Bhaskar Chandra
323 Regular [email protected] 0
composites fabricated by Stir Kandpal Kandpal
casting

Study of Effect of Surface

Treatment on Mechanical [email protected]
324 Regular Jai Inder Preet Singh Jai Inder Preet Singh 0
Properties of Natural Fiber m
Reinforced Composites
Performances of different mill
325 cutters in machining of GFRP Regular D.Ramana Reddy I.S.N.V.R.Prashanth [email protected] 0
Composite Laminates
 Estimation of Wear and
Thermoelastic Behavior of
326 AA2024/Titanium Diboride Regular Chennakesava Reddy Chennakesava Reddy [email protected] 0
Nanoparticle Metal Matrix
Composites

Micromachining of Borosilicate
327 Regular Pravin Pawar Pravin Pawar [email protected], 0
Glass : A State of Art Review

Comparative Performance
328 evaluation of an active/passive Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
solar Distillation system

Modeling Of Frp Composites For

329 The Prediction Of Effective Regular Kamala Priya B. Kamala Priya B. [email protected] 0
Thermal Conductivity

Effects of Polyamide and/or

Phenalkamine Curing Agents on [email protected]
330 Regular P. Deepak P. Deepak 0
the Jute Fibre Reinforcement with m
Epoxy Resin Matrix

Failure Analysis of Fibre-

331 Regular Nitin Jauhari Nitin Jauhari [email protected] 0
Reinforced Composite Laminates

Grey Relational Analysis Based

Optimization Of Multiple
332 Regular K Panneerselvam K Shunmugesh [email protected] 0
Responsesin Drilling Of Carbon
Fiber-Epoxy Composites

Processing and Characterization

of Banana Fiber/Epoxy Elammaran Muhammad Khusairy
333 Regular [email protected] 0
Composites: Effect of Alkaline Jayamania Bin Bakria
Treatment
 X-ray Peak Profile Analysis and
Microstructural Characterization
334 Regular B. Rajesh Kumar M. Vishnu Chittan [email protected] 0
of Solid State Sintered TiO2
doped ZnO Ceramics

Microstructures and Mechanical

335 Properties of Al-Si-Mg-Ti/Egg Regular Shahrukh Shamim Shahrukh Shami [email protected] 0
Shell Particulate Composites

Mechanical Properties
Characterization of Okra Fiber
336 Regular Rakesh.Potluri Rakesh.Potluri [email protected] 0
Based Green Composites&
Hybrid Laminates
The effect of healing time on the
self-healing efficiency of carbon
337 Regular Saurabh Saini Saurabh Saini [email protected] 0
fibre reinforced polymer
composites
Study of Wear Properties of
Jute/Banana Fibres Reinforced [email protected]
338 Regular P. Deepak P. Deepak 0
Molybdenum disulphide m
Modified Epoxy Composites
Microstructural and Raman
Spectroscopic Analysis of Sb2O3
339 Regular B. Rajesh Kumar N. Lalithakumari [email protected] 0
Doped ZnO Composite
Semiconductor
Fabrication of Aluminium Metal
Matrix Composites with [email protected].
340 Regular Yashpal Yashpal 0
Particulate Reinforcement: A in
Review
Mechanical Properties of
341 Geopolymer Concrete Regular Kolli.Ramujee Kolli.Ramujee 0
Composites
Reusing industrial lime sludge
342 waste as a filler in polymeric Regular Satadru Kashyap Satadru Kashyap [email protected] 0
composites
 Design of Experiments Analysis
343 of Friction Behavior of Al-TiB2 Regular S.Poria S.Poria [email protected] 0
Composite

Dry sliding wear behaviour of

344 SiCpreinforced Zn-Mg-Cu based Regular Diptikanta Das Diptikanta Das [email protected] 0
aluminium matrix composite

Development of Ni-WC
345 composite clad using microwave Regular Prabakhar M Bhovi Lohit R B [email protected] 0
energy

Effect of B4C particle

reinforcement on the various
346 Regular Dinesh Patidar Dinesh Patidara [email protected] 0
properties of aluminium matrix
composites: a survey paper

Exploration of Mechanical
behaviour and Wear Behaviour of
347 Regular M Nagendra Naik M Nagendra Naik [email protected] 0
Al4C3 Reinforced Aluminium
Metal Matrix Composites

Ge rich Chalcogenide material for

348 Regular C.M. Joseph B.G. Sangeetha [email protected] 0
Non volatile memory applications

Low temperature fabrication and

characterization of Si-O-C cured
349 Regular Kalaimani Markandan Kalaimani Markandan [email protected] 0
alumina toughened zirconia
(ATZ)

Influence of selective
reinforcement in dynamic
350 Regular Loganathan T G Loganathan T G [email protected] 0
performance of glass-epoxy
composites
Optimization of process
351 parameters in milling of TiO2 Regular B.C. Routara Soumya Dash [email protected] 0
filled GFRP composite
 Dry Sliding Wear Performance of
352 Al/7075/Al2O3p/Grp Regular P.Anitha P.Anitha [email protected] 0
Hybrid Metal Matrix Composites

Optimization of EDM process

parameters for AlSiC- 20% SiC
353 reinforced metal matrix Regular Avijeet Satpathy Avijeet Satpathy [email protected] 0
composite with multi response
using TOPSIS

Preparation and Characterization Kareddula Vijaya Kareddula Vijaya

354 Regular [email protected] 0
of GFRPC Material Kumar Kumar

Synthesis, Microstructure and

Mechanical Properties of
Al2O3/ZrO2/CeO2 Composites
355 Regular Vikas Verma Vikas Verma [email protected] 0
with Addition of Nickel and
Titania Processed by
Conventional Sintering

Numerical investigation of
clustering effect on the uniaxial
356 Regular S. G. Kulkarni S. G. Kulkarni [email protected] 0
stress strain behaviour of A356
matrix composite
Effect of Normal Load and
Velocity on Continuous Sliding
357 Friction and Wear Behavior of Regular Pujan Sarkar Pujan Sarkar [email protected] 0
Woven Glass Fiber Reinforced
Epoxy Composite

Mechanical behaviour of hybrid

358 composite (AA6351+Al2O3+Gr) Regular V.Mohanavel V.Mohanavel [email protected] 0
fabricated by stir casting method

Analysis of Mechanical
359 Properties of Fiber Glass-Epoxy- Regular Rajesh Purohit Rajesh Purohit [email protected] 0
Fly Ash Composites
 Static vs. Buckling Failure of thin
[email protected]
360 FRP laminate under Thermal Regular B.Sreenivasa Rao B.Sreenivasa Rao 0
m
Loading

Mechanical properties of burmese

Madhusudhan Reddy Madhusudhan Reddy
361 silk orchid fiber reinforced epoxy Regular [email protected] 0
B B
composites

Mechanical Characterization of
362 AA7068-ZrO2 reinforced Metal Regular Madhusudhan M Madhusudhan M [email protected] 0
Matrix Composites
Synthesis and Mechanical
Characterization of Magnesium
363 Regular V.Sridhar V.Sridhar [email protected] 0
Reinforced With Nano Alumina
Composites
Effects of Test Parameters and
SiCp Reinforcement on the Slurry Mohammad Mohsin Mohammad Mohsin
364 Regular [email protected] 0
Erosive wear response of Al-Si Khan Khan
Alloy

Effect of Layout Sequence on the

Melissa Melissa
365 Integrity of Poly-lactic Acid and Regular [email protected]. 0
AugustineSaidi AugustineSaidi
Rice Straw Fibre Composites

Extraction and Characterization

of Physicochemical and Tensile , K. Hemachandra
366 Regular N. C. Sandeep [email protected] 0
Properties of Aegle Marmelos Reddy
fiber
Mechanical Characterization Of
Unidirectional Carbon And
C.Venkateshwar C.Venkateshwar
367 Glass/Epoxy Reinforced Regular [email protected] 0
Reddy Reddy
Composites For High Strength
Applications
Performance of Box-Behnken and
prediction model are compared Dinesh Kumar Dinesh Kumar
368 Regular [email protected] 0
with Al-Nano MMC to maximize Kasdekar Kasdekar
the MRR
 Comparative Analysis of Bamboo
using Jute and Coir Fiber
369 Regular M. Ramachandran Sahas Bansal [email protected] 0
Reinforced Polymeric
Composites
Evaluation of Fatigue Life of
Al2024/Al2O3 Particulate Nano
370 Regular S. Rajesh P. Rama Murty Raju [email protected] 0
Composite Fabricated Using Stir
Casting Technique
A Multi Scale Approach for
371 Analysis of Fiber Reinforced Regular Azeez Shaik Azeez Shaik [email protected] 0
Composites
Effect of Fibre Content on
Mechanical Properties and Water
372 Regular V.K. Gupta Manpreet Singh Bahra [email protected] 0
Absorption Behaviour of
Pineapple/HDPE Composite
Mechanical behavior of in situ
ZrB2/AA2014 composite
373 Regular V. Mohanavel V. Mohanavel [email protected] 0
produced by the exothermic salt-
metal reaction technique
An Overview of Lignin &
Hemicellulose Effect Upon
374 Regular Nabanita Banik Nabanita Banik [email protected] 0
Biodegradable Bamboo Fiber
Composites Due to Moisture
Evaluation of Mechanical and
Insulation Properties of Nomex-
375 Regular R Pramod R Pramod [email protected] 0
T410 and HS Glass Polymer
Matrix Composites
Study of the Recast Layer of
Particulate Reinforced Metal
376 Regular Sarabjeet Singh Sidhu Sarabjeet Singh Sidhu [email protected] 0
Matrix Composites machined by
EDM
Low velocity Impact
Characterization of Glass Fiber
377 Regular N Nasir Hussain N Nasir Hussain [email protected] 0
Reinforced Plastics for
Application of Crash Box
 Performance evaluation of
378 composite material for aircraft Regular P Karthigeyan P Karthigeyan [email protected] 0
industries
Development of Cu-Al2O3-CBN
Hybrid Composite through
[email protected]
379 Powder Metallurgy Process and Regular Navin Kumar Solanki Rajesh Purohit 0
m
Analysis of Mechanical
Properties

Ultrasonic Assisted Fabrication of

380 Magnesium Matrix Composites: Regular Santanu Sardar Santanu Sardar [email protected] 0
A Review

Experimental Investigation of
Optimum level of
Parshuram M Parshuram M
381 Reinforcementswithin 6061Al Regular [email protected] 0
Sonawane Sonawane
Alloy for betterTribological and
Mechanical Properties

Preparation and Characterization

382 of Barium Titanate Composite Regular Neeraj Kumar Sudhanshu Singh [email protected] 0
Film

Processing and Characterization

Prashantha Kumar Prashantha Kumar
383 of Al 6061 Graphene Regular [email protected] 0
H.G H.G
Nanocomposites

Effect of red mud on mechanical

and chemical properties of
384 Regular Dibakar Behera Shivkumari Panda [email protected] 0
unsaturated polyester-epoxy-
bamboo fiber composites

Processing and Characterization

Techniques of Graphene
385 Reinforced Metal Matrix Regular Anthony Xavior .M Anthony Xavior .M [email protected] 0
Composites (GRMMC); A
Review
 Investigation of torsional
[email protected]
386 behavior of polymer composite Regular Vijaya Ramnath. B Vijaya Ramnath. B 0
du.in
golf shaft
Investigation of Midrib of Cocos
387 nucifera Leaves for Regular Neeraj Dubey Neeraj Dubey [email protected] 0
Reinforcement of Polyester

Prediction of tensile behavior of

388 Regular Vijaya Ramnath. B Vijaya Ramnath. B [email protected] 0
polymer composite golf shaft

Statistical analysis of mechanical

properties of vakka fiber
389 Regular N. Ravi Kumar N. Ravi Kumar [email protected] 0
reinforced polypropylene
composites using Taguchi method

The effect of alkaline treatment

on their properties of Jute fiber
390 Regular Sathishkumar. S Sathishkumar. S [email protected] 0
mat and its vinyl ester composites

Production, Microstructure and

Mechanical behavior of
391 AA6351/TiB2 composite Regular V.Mohanavel V.Mohanavel [email protected] 0
synthesized by direct melt
reaction method

Mechanical Properties of Bamboo

392 Regular Rajesh Purohit C. S. Verma [email protected] 0
Laminates with other composites

Effect of variation in frequencies

on dynamic mechanical
393 Regular M. K. Gupta Sunil Singh Rana [email protected] 0
properties of short sisal fibre
reinforced epoxy composite
 Comparative Evaluation of
Mechanical Properties of Sisal-
394 Epoxy Composites With and Regular Partha Haldar Partha Haldar [email protected] 0
Without Addition of Aluminium
Powder
Tensile Fracture strength of
Boron (SAE-
395 Regular R.V. Choudri R.V. Choudri [email protected] 0
1042)/Epoxy/Aluminium (6061-
t6) laminates
Investigation of Carbon
Composites Subjected to
396 Regular V.Rajesh V.Rajesh [email protected] 0
Different Environmental
Conditions

Flexural and Impact Properties of

397 Midrib of Coconut Palm Leaves Regular Neeraj Dubey Neeraj Dubey [email protected] 0
Reinforced Polyester

Microstructural and Erosive Wear

Behavior on Coarse Silica Sand
398 Regular Raman Nateriya Raman Nateriya [email protected] 0
of Dual Reinforced Particle
(DRP) LM-13 Alloy Composites

Study on mechanical properties of

environment friendly Aluminium
399 Regular Siddharth Patel Siddharth Patel [email protected] 0
E-waste Composite with Fly ash
and E-glass fiber

Effect of variation of low cost

reinforcement on natural
frequency
400 Regular R. S. Rana R. S. Rana [email protected] 0
Ofpolyester resin glass fibre
hybrid composites
 Effect of Heat Treatment on
Mechanical Properties of
401 Aluminium alloy-Fly ash Metal Regular Sumit Kumar Tiwari Sumit Kumar Tiwari [email protected] 0
Matrix Composite

A Review on mechanical property

402 of sisal glass fiber reinforced Regular Ashish kumre Ashish kumre [email protected] 0
polymer composites

Mechanical Properties Of Coir/ G

403 Lass Fiber Epoxy Resin Hybrid Regular Rahul Shrivastava Rahul Shrivastava [email protected] 0
Composite

Study of Wear Characteristics of

404 Hematite Reinforced Aluminum Regular Phanibhushana M. V Phanibhushana M. V [email protected] 0
Metal Matrix Composites

Effect of Ultrasonic Stirring on

Changes in Microstructure and
Mechanical Properties of Cast In
405 Regular Krishan Kumar Patel Krishan Kumar Patel [email protected] 0
situ Al 5083 alloy Composites
Containing 5wt.% and 10wt.%
TiC particles

Effect Of Deep Cryogenic

Treatment On Composite
406 Regular G. Hemath Kumar G. Hemath Kumar [email protected] 0
Material For Automotive Ac
m
System
Actively Tuned Vibration
407 Absorber using Smart Adaptive Regular Basavaraj Noolvi Basavaraj Noolvi [email protected] 0
Composites
Effect of Aging on mechanical
behaviour of
408 ADC12-Fly Ash particulate Regular Sumit Kumar Tiwari Sumit Kumar Tiwari [email protected] 0
composite
 High Performance Concrete with
409 Copper slag for Marine Regular S.Geetha S.Geetha [email protected] 0
Environment

Advanced Application of Polymer

410 Regular Rajesh Purohit Deepen Banoriya [email protected] 0
based Biomaterials
Design and Performance of a
Prototype Clamped Free Beam K.Viswanath K.Viswanath
411 Regular [email protected] 0
Novel Energy Harvester for low Allamraju Allamraju
power applications
Improvement in Electrochemical
Performance of Spray Deposited
412 Regular S. G. Kandalkar M. S. Pawar [email protected] 0
V2O5 Thin Film Electrode by
Anodization.
Structural and Electrochemical
Behaviour of Electro-deposited
413 Ni Doped V2O5 Thin Film on Regular S. G. Kandalkar M. S. Pawar [email protected] 0
Quenched Stainless Steel
Substrate.
Erosion Wear in A Slurry Pipe
414 With Multisized Coal And Regular Gurprit Singh Gurprit Singh [email protected] 0
Bottom-Ash Slurries

A Comprehensive Study of the

415 Regular Radha Krishna Lal Radha Krishna Lal [email protected] 0
Different Parameters of Solar Still

Processing, properties and

416 applications of Ni-Ti-Fe shape Regular T Ram Prabhu Karthik G [email protected] 0
memory alloys
Experimental comparison of
friction stir welding process and
417 Regular Gurmeet Singh Gurmeet Singh [email protected] 0
TIG welding process for 6082-T6
Aluminium alloy
 Investigation of Mechanical
Properties of Multi-Layered
418 Functionally Graded (FG) Regular Ravindra Bharilya Ravindra Bharilya [email protected] 0
Sandwich Structure developed by
Compressive Moulding Route

Process Capability Analysis and

419 Optimization in Turning of Regular S Aravind S Aravind [email protected] 0
11sMn30 Alloy

Effect of Pre-Heat Time on Force

420 During Friction Stir Welding Of Regular Ashish Kumar Shukla Ashish Kumar Shukla [email protected] 0
Aluminium 1050 Alloy

Analysis of Surface Roughness

during Machining of Hardened
421 Regular Sanjeev Kumar Sanjeev Kumar [email protected] 0
AISI 4340 Steel using Minimum
Quantity lubrication

Preparation of biodiesel by three

bharatkumar_modhera@yaho
422 step method followed purification Regular ShikhaGangil ShikhaGangil 0
o.com
by various silica sources

Displacement Control of
Photostrictive Actuators for
Vibration Control with the Aid of
423 Regular P.D. Darade P.D. Darade [email protected] 0
Fuzzy Logic Control along
with PSO Algorithm

Design of Special Adapters and

Furnace for Hot Helium Leak
424 Regular Govindaraju M Govindaraju M [email protected] 0
Testing of Plasma Physics
Components
Role of Green Tribology in
Sustainability of Mechanical
425 Regular M. F. Wani Ankush Anand [email protected] 0
Systems: A State of the Art
Survey
 Experimental investigation on
influence of ECM process
426 Regular Rajnee Kant Pandey Rajnee Kant Pandey [email protected] 0
parameters on responses using
full factorial design
Failure modes of spot welds in
427 quasi static tensile shear Regular M. Mahapatra L. Boriwal [email protected] 0
loading of coated steel sheets.
Laser Power and Powder flow
rate influence on the metallurgy
428 Regular R.M Mahamood R.M Mahamood [email protected] 0
and microhardness of Laser metal
Deposited Titanium alloy.
Two start and Three Start Helical
429 Abrasive Flow Machining for Regular Qasim Murtaza Ravi Butola [email protected] 0
Brittle Materials
Investigating the surface
properties of EN-31 die-steel after
430 Regular Parveen Goyal Parveen Goyal [email protected] 0
machining with powder
metallurgy EDM electrodes

Seismic design methodology for

431 Regular Manoj Kumar Gupta Manoj Kumar Guptaa [email protected] 0
Liquid Nitrogen tank: A Review

Machinability of Nickel Based Gopala Rao Gopala Rao

432 Regular [email protected] 0
Superalloys: A Review Thellaputta Thellaputta

Influence of Post-weld Rapid

cooling on Grain size and
433 Regular Aruri Devaraju Aruri Devaraju [email protected] 0
Mechanical properties of Friction
Stir Welded AA 2014
Flow Dynamics in the Melt
[email protected]
434 Puddle During Planar Flow Melt Regular Sowjanya M Sowjanya M 0
om
Spinning Process

Flapwise Vibration of Rotating

435 Regular P. Ravi Kumar P. Ravi Kumar [email protected] 0
Functionally Graded Beam
 Noise and Vibration Emissions of
436 Regular Anubhav Shiva Anubhav Shiva [email protected] 0
Railway Bridges

Effect of Annealing on Nano

crystalline ZnO Thin Film srkumar20052923@rediffmai
437 Regular S.R. Kumar Shashikant Rajpal 0
Developed by Electro deposition l.com
Method
Parametric analysis on Electro-
438 chemical machining of SKD-12 Regular J. Jeykrishnan J. Jeykrishnan [email protected] 0
tool steel
Dynamic Response of Lined
Circular Tunnel in Linear
439 Regular J. P. Dwivedi J. P. Dwivedi [email protected] 0
Viscoelastic Medium Due to
Moving Ring load
Process modeling of gelcast
Gurabvaiah Gurabvaiah
440 Si3N4ceramics using multi gene Regular [email protected] 0
Punugupati Punugupati
genetic programming
Past and Current Status of Eco-
441 Friendly Vegetable Oil Based Regular M. Ravi Sankar Kishor Kumar Gajrani [email protected] 0
Metal Cutting Fluids

Friction Surfaced Deposits For

442 Regular S.Ravisekhar S.Ravisekhar [email protected] 0
Industrial Applications

Implementation of Condition
Based Diagnosis as Maintenance
443 Regular Lakhan Patidar Lakhan Patidar [email protected] 0
Improvement Strategy in Turbo
Blower Assembly

An overview of Polymeric
444 Materials for Automotive Regular Akshat Patil Akshat Patil [email protected] 0
Applications
 Synthesis of Nanostructured
Metal Oxide by Microwave-
445 Regular K. Venkateswara Rao CH. Ashok [email protected] 0
Assisted Method and its
Humidity Sensor Application

Structure and Magnetic

Characteristics of Co & Cr-doped
446 Regular V.N. Shukla Sabpreet Bhatti [email protected] 0
ZnO nanoparticles, synthesized
by using Microwave method

Synthesis, Characterization and

Study of Influence of Pure TiO2
447 Nanoparticles Thin Film Regular M. H. Mangrola M. H. Mangrola [email protected], 0
Developed By e-Beam
Evaporation
Structural and Electrical
448 Properties of Nanocrystalline Regular V. G. Joshi Nisha D. Patel [email protected], 0
Barium Strontium Titanate

Experimental studies on effect of

cmohanraj.mech@selvamtech
449 heat transfer with Cuo-H2O Regular C.Mohanraj C.Mohanraj 0
.com
nanofluid on flat plate Heat Pipe

Comparision of the Mechanical

Performance betweenNano Clay
and Molybdic AcidFilled Banana
450 Regular K.M.V.Ravi Teja K.M.V.Ravi Teja [email protected] 0
(Empty Fruit Bunch)
FiberReinforced Polyester
Composites
Effect of MWCNT Composition
451 on the Hardness of PP/MWCNT Regular Prashant Jindal Siddharth Bansala [email protected] 0
Composites
An overview of processing and
452 properties of Cu/CNT Nano Regular T Ram Prabhu Ashutosh Singh [email protected] 0
Composites
 Optimization of Mechanical
Properties of AA 5083 Nano SiC
453 Regular R. S. Rana R. S. Rana [email protected] 0
Composites using Design of
Experiment Technique

Fabrication and characterization

of nano-ZrO2 dispersed W-based
454 Regular A. Patra A. Patra [email protected] 0
alloys by mechanical alloying and
conventional sintering

Structural and Optical Properties

455 of Nanostructured Cu2O Thin Regular B. Rajesh Kumar B. Rajesh Kumar [email protected] 0
Films for Optoelectronic Devices

Synthesis and characterization of

Yb doped Y2O3 nanopowder for
456 Regular Pragya Pandit Pragya Pandit [email protected] 0
transparent laser host ceramic
materials

Fabrication and Experimental

Investigation on Dye Sensitized Tallapragada V S S P Tallapragada V S S P
457 Regular [email protected] 0
Solar Cells Using Titanium Sashank Sashank
Dioxide Nano Particles

Experimental investigation on the

458 preparation and applications of Regular G.Narendar G.Narendar [email protected] 0
Nano fluids

Investigation on the structural and

optical properties of
hexamethylene tetramine
459 Regular H.S. Bhojya Naik G. Arun Kumar [email protected] 0
(HMTA) capped ZnS:Mn
nanocrystals synthesized by
microwave irradiation method
 Hybrid Cellulose Bionano
composites from banana andjute
460 fibre:AReview of Regular AyushRathore AyushRathore [email protected] 0
Preparation,Propertiesand
Applications
Mechanical Behaviour of
461 Graphene Reinforced Aluminum Regular A.Mokhalingam A.Mokhalingam [email protected] 0
Nano composites
Silicon Carbide Reinforced
462 Aluminium Metal Matrix Nano Regular A Prasad Reddy A Prasad Reddy [email protected] 0
Composites-A Review

Effect of capping agents on the

463 optical properties of synthesized Regular S.Kr. Nath S.Kr. Nath [email protected] 0
CuS nanostructures

Three Body Abrasive Wear

464 Studies on Nanoclay/NanoTiO2 Regular C R Mahesha C R Mahesha [email protected] 0
filled Basalt-Epoxy Composites

Study on the Multiwalled Carbon

465 Nano tube Mixed EDM of Al- Regular Harmesh Kumar Sachin Mohal [email protected] 0
SiCp Metal Matrix Composite

Effect of self- assembled ZnO2

intermediate layer on the growth
of starch capped ZnO/ ZnS
466 Regular Sujata Deb Sujata Deb [email protected] 0
core/shell nano composites
through chemical bath deposition
method
Optical characterisation and
[email protected]
467 device application studies of Regular Sasidaran V Sasidaran V 0
om
quaterthiophene (QT) thin films

Processing and dry sliding wear

468 behavior of Al2O3 nanoparticles Regular Shivakumar.N Shivakumar.N [email protected] 0
reinforced ZA-27 composites
 Mechanical characterization of
vacancy defective single-walled
469 Regular Amit Kumar Amit Kumar [email protected] 0
carbon nanotube/epoxy
composites

Review on Thermal Conductivity

470 Regular R. M. Sarviya R. M. Sarviya [email protected] 0
of Nanofluids

Manufacturing Issues of
471 Polypropylene Nanocomposite by Regular K Panneerselvam Jafrey Daniel D [email protected] 0
Melt Intercalation Process
The Effect of Hot Forging and
Heat Treatment on Wear
472 Regular Rajesh Purohit Rajesh Purohit [email protected] 0
Properties of Al6061-Al2O3
Nano Composites
Recent developments in
Nanoparticles Synthesis,
473 Regular Veeresh Fuskele Veeresh Fuskele [email protected] 0
Preparation and Stability of
Nanofluids

Mechanical properties of
474 functionalized multiwalled carbon Regular Subhra Gantayat Subhra Gantayat [email protected] 0
nanotube/epoxy nanocomposites

Preparation of nano surface layer

composite (TiB2)p on 6061-T6
475 Regular Aruri Devaraju V Kishana [email protected] 0
Aluminum Alloy via Friction Stir
Processing
Characterization and performance
[email protected]
476 of nanofluids in plate heat Regular Vikas Kumar Vikas Kumar 0
m
exchanger
Role of Carbon Nano Tubes in
Surface Modification on
477 Regular Pallavi Chaudhury Pallavi Chaudhury [email protected] 0
Electrical Discharge Machining
-A Review
 Carbon nanotubes as adsorbent to
Divyansh Kumar Divyansh Kumar 131119055_divyansh@manit.
478 remove heavy metal ion (Mn+7) Regular 0
Yadav Yadav ac.in
in wastewater treatment

Characterization of Nanofluids as
479 an advanced heat transporting Regular A.K Tiwari S.K Verma [email protected] 0
medium for Energy Systems

Synthesis and Characterization of

Nano-Crystalline
480 Regular RupaliJha RupaliJha [email protected] 0
Silicoaluminophosphates from
Non-aqueous Media
Effect of Thiolated-Silver
Praveen Kumar
481 Quantum clusters on Flexural Regular D.G.Harris Samuel [email protected] 0
Balguri
Properties of Epoxy Polymer
Experimental Studies in Multi
482 Stage Incremental Forming of Regular KurraSuresh KurraSuresh [email protected] 0
Steel Sheets
Studies on Nanocrystalline Nickel
483 Oxide Thin Films for Potential Regular Suresh Sagadevan Suresh Sagadevan [email protected] 0
Applications

Detachment forces on Spherical

484 Regular Manoj Kumar Gupta1 Manoj Kumar Gupta1 [email protected] 0
bubble during formation
 Order of No. of pps Identify any
Total no. of
appearance in Corresponding Author mailing address (Accepted figures that
figures
the special issue article) are in colour

Bhai Gurdas Institute of Engineering &

1 9 7 0
Technology, Sangrur 148001, India

Assistant Professor, MSRUAS, Bangalore,

2 6 3 3
560058, India

Department of Mechanical Engineering, YMCA

3 University of Science & Technology, 7 2 1
Faridabad-121006, Haryana, India

Kanya Mahavidyalaya, Department of

4 7 5 2
Chemistry,Islampur

Research Scholar ,Mechanical Engineering

5 Department,National Institute of Technology, 8 11 9
Warangal, India-506004
 Department of Mechanical Engineering, Indian
6 9 5 5
School of Mines, Dhanbad 826004, India

Department of Mechanical Engg, Bhai Gurdas

7 Institute of Engg. & Tech, Sangrur-148001, 10 10 10
Punjab, India.

Department of Engineering, Ayatollah Amoli

8 5 0 0
Branch, Islamic Azad University, Amol, Iran

Assistant Professor,Mechanical Engineering

9 Department,UCEK(A),JNTU 9 11 7
KAKINADA,533003,INDIA

The Department of Mechanical Science,

University of Johannesburg, Auckland Park
10 10 12 9
Kingsway Campus, Johannesburg 2006, South
Africa

Asst. Professor,Dept. of Mech. Engg.,

11 Viswajyothi College of Engineering and 10 13 0
Technology, Kochi-6866702-India

Assistant Professor, Pimpri Chinchwad Collage

12 7 8 7
of Engineering, Pune,Maharashtra, India
 Department of Mechanical Engineering,
Viswajyothi College of Engineering &
13 8 7 1
Technology, Vazhakulam, Ernakulam- 686670,
India

Department of Mechanical Engineering, B.M.S.

14 College of Engineering., Bangalore, Karnataka- 10 4 4
560 019, INDIA

Department of Metallurgical and Mateirlas

15 Engineering, National Institute of Technology 10 17 9
Rourkela, Rourkela, Orissa, Pin-769008

prof .Production engineeringand Metallurgy

16 10 10 6
Dept. ,UOT, Baghdad ,10066,Iraq

Modern and Advanced Manufacturing Systems

Research Group, Department of Mechanical
17 9 6 4
Engineering Science, University of
Johannesburg, 2006, South Africa

University of Johannesburg, Department of

18 Mechanical Engineering Science, Johannesburg 6 4 2
2006, South Africa

a. Department of Engineering Metallurgy,

Faculty of Engineering and the Built
19 7
Environment, Doornfontein Campus University
of Johannesburg 2986

PhD Student, Department of Mechanical

20 10 4 4
Engineering, SVNIT, Surat, 395007, India
bAssistant professor, Department of
21 Mechanical Engineering, Gitam University, 10 9 6
Hyderabad 502329, India
 RDAQA(M),c/o DRDL, Hyderabad - 500058,
India; bDepartment of Metallurgical
22 8 4 4
Engineering, IIT (BHU), Varanasi 221005,
India
Department of Production Engineering,
National Institute of
23 9 9 8
Technology,Tiruchirappalli-620015, Tamilnadu,
India
Department of Physics, Anil Neerukonda
Institute of Technology and
24 7 5 0
Sciences(Autonomous), Visakhapatnam - 531
162, A.P, India
Mechanical Engineering Department,National
25 Institute of Technology, Warangal, India- 8 7 7
506004

Undergraduate Student, Department of Material

26 Science and Metallurgical Engineering, 8 4 4
MANIT, Bhopal, MP 462007, INDIA

Department of Mechanical Engineering,

27 JNTUH College of Engineering, Kukatpally, 8 9 8
Hyderabad, Telangana State, India

B.M.S Institute of Technology, Avalahally,

28 7 12 0
Bangalore-560064, India

Department of Mechanical Engineering, SR

29 5 8 2
Engineering College, Warangal, T.S., India

Mechanical Engineering Department,

30 6 2 1
M.A.N.I.T,Bhopal-462003, India
 Department of Applied Chemistry, Shri G. S.
31 Institute of Technology and Science, 23 Park 8 0 0
Road, Indore 452003(MP) India

Associate Professor, Mechanical Engineering

32 8 7 4
Department, MANIT, Bhopal, 462003, India

Department of Physics, KCG college of

33 6 4 4
Technology, Chennai, India

Materials Research Laboratory, Department of

34 6 5 4
Chemistry

Department of Mechanical engineering, Beant

35 college of Engineering and Technology, 10 6 4
Gurdaspur-143521, India

Centre of Excellence on Phase Transformation

36 and Product Characterisation, TEQIP-II, 9 8 0
Jadavpur University, Kolkata 700032, India

Discipline of Mechanical Engineering, Indian

37 Institute of Technology Indore, Indore 453446, 7 5 3
India
Dicipline of Mechanical Engineering, Indian
38 Institute of Technology Indore, Indore-453446, 10 10 9
India

Department of Mechanical Eng, Sagar. Institute

39 of research and Technology, Ayodhya by pass 15 13 8
road Bhopal (MP) India

Department of Aerospace Engineering and

40 Applied Mechanics,Indian Institute of 10 6 6
Engineering Science and Technology,
 Department of Industrial Chemistry, Kuvempu
41 10 9 9
University, Shankaraghatta, 577 451, India

Mechanical Engineering, S V National Institute

42 10 8 8
of Technology, Surat, Gujarat, India

Department of Mechanical Engineering,

43 Faculty of Engineering, Amrita Vishwa 11 14 12
Vidyapeetham, Kollam, Kerala-690 525, India

Division of Manufacturing Processes and

44 Automation Engineering,Netaji Subhas 7 7 7
Institute of Technology, New Delhi, India

Department of Mechanical Engineering,

45 National Institute of Technology, Kurukshetra- 6 5 4
136119, India

Associate Professor, Dept. of Mechanical

46 Engineering, Malnad College of Engineering, 6 5 3
Hassan 573202, India

Research Scholar, Dept. of Mechanical

47 Engineering, Malnad College of Engineering, 7 5 3
Hassan 573202, India

School of Aeronautical sciences, Hindustan

48 9 12 10
University, Chenna 603103, India

Department of Mechanical Engineering,

49 Maulana Azad National Institute Of 10 3 3
Technology, Bhopal (M.P.), India
 aDepartment of Mechanical Engineering,
50 13 15 11
GRIET, Hyderabad-500090, Telangana, India

Department of Mechanical Engineering, Amrita

51 Vishwa Vidyapeetham University, Bengaluru- 10 12 9
560035, India

Assistant Professor ,Department of ME ,GRIET

52 8 3 3
,Hyderabad 500090,India

Department of Mechanical Engineering,

53 G.J.U.of Science and Technology, 6 3 3
Hisar,125001, India

Department of Mechanical Engineering

54 Science, Faculty of Engineering and the Built 8 6 5
Environment, University of Johannesburg

Department of Mechanical Engineering, Global

55 5 0 0
Institute of Technology, Jaipur, India

Department of Mechanical Engineering,

56 National Institute of Technology, Kurukshetra, 13 7 7
Haryana, India (136119)

Research Scholar, Department of Mechanical

Engineering, Engineering Design Division,
57 11 2 0
CEG Campus, Anna University, Chennai -
600025
 Assistant Professor, Department of Chemistry,
58 9 6 5
UIT, RGPV, Bhopal, (M.P.), India

Department of Civil Engineering, Heritage

59 10 9 0
Institute of Technology,Kolkata 700107, India

Department of Physics, Dayananda Sagar

College of Engineering, Shavige Malleswara
60 6 5 0
Hills, Kumaraswamy Layout, Bangalore
560078,
Department of Mechanical Engineering, BITS-
61 Pilani, Hyderabad Campus, Hyderabad, 6 5 3
Telangana, India - 500078

Department of Mechanical Engineering

Science, University of Johannesburg, Auckland
62 7 4 3
Park Kingsway Campus, Johannesburg, 2006,
South Africa.

Tezpur University, Assam, Tezpur, 784028,

63 8 5 3
India

Department of Mechanical Engineering,

Vishwavidyalya Engineering College,
64 10 7 3
Lakhanpur, Sarguja University Ambikapur,
(C.G.), India

Research Scholar, JNTU

65 7 10 6
Anantapur,Ananthapuramu and 515002, India

Mechanical Engineering Department, National

66 8 8 8
Institute of Technology Patna, 800005, India
 Associate Professor, Mechanical Engg.
67 Department, PEC University of Technology, 9 4 4
Chandigarh 160012,India

Assistant professor, Thiravium college of Arts

68 7 5 4
and Science, Periyakulam, Tamilnadu

Research Scholor,Sinhgad college of

69 7 7 4
Engineering,University of Pune, 411041, India

Associate professor, Jayaraj Annapackiam

70 10 7 4
College for Women, Periyakulam, Tamilnadu

Assistant professor, Jayaraj Annapackiam

71 8 3 3
College for Women, Periyakulam, Tamilnadu

Materials Science and Technology Division,

72 CSIR National Metallurgical Laboratory, 10 7 3
Jamshedpur 831007, India

Department of Mechanical Engineering,

73 Sinhgad Institute of Technology and Science, S. 6 4 4
P. Pune University,Pune 411041, India

Assistant Professor, Department of Mechanical

Engineering, Karpagam College of
74 8 5 3
Engineering,Coimbatore- 641 032, Tamil Nadu,
India.
 Ph. D Scholar, Department of Mechanical
Engineering , Mahatma Gandhi Chitrakoot
75 7 9 9
Gramodaya Vishwavvidyalay, Chitrakoot ,
Satana (M.P.)

Mechanical Engineering Department,Sinhgad

76 Institute of Technology and Science, Narhe, 8 6 4
Pune, Maharashtra-411041.India.

Department of Mechanical Engineering, Indian

77 9 8 8
Institute of Technology Guwahati781 039

Professor and PG Co-ordinator (Thermal Power

78 Engineering), Mechanical Engineering 8 7 7
Department, RYMEC Bellary, Karnataka, India

Assit prof. Mechanical Engineering Dept.

79 13 15 9
SVNIT Surat, India

Ms. Gayathri Tadepalli, Asst. Professor, CVR

80 6 9 6
College of Engineering, Hyd-510, India

Department of CSE, GRIET, Hyderabad-

81 6 5 4
500090, Telangana, India

Department of Mechanical Engineering, Delhi

82 6 4 4
Technological University, New Delhi 110042
 Department of Physics, C. Kandaswami Naidu
83 College For Men (CKNC), Chennai, 600 102. 5 3 1
India

Materials Development and Processing

Research Group, Department of Metallurgical
84 10 9 6
and Materials Engineering, University of
Lagos, Lagos, Nigeria 101017

Department of Chemical Engineering, Maulana

85 Azad National Institute of Technology, Bhopal, 6 4 3
Madhya Pradesh, India -462051

Mechanical Engineering
86 10 8 7
Department,MANIT,BHOPAL,462051,India

Associate Professor, Dept.of Mechanical

87 Engineering, Mahatma Gandhi Institute of 7 4 0
Technology,

Department of Mechanical Engineering ,

88 6 3 3
GRIET, Bachupally, Hyderabad-500072, India

Research Scholar,Department of MSME,

89 6 5 5
MANIT, Bhopal-462003, India

Department of Mechanical Engineering, Birla

90 Institute of Technology and Science pilani- 10 11 9
Hyderabad campus,Hyderabad,India
 Research Scholar, Maulana Azad National
91 7 5 5
Institute of Technology, Bhopal, 462003, India

aDepartment of Mechanical Engineering,

92 8 3 3
GRIET,HYD,500090

Mechanical Engineering Department,

93 MCET/Osmania University, 7 7 5
Hyderabad,500001, India

Department of Mechanical Engineering, Madan

94 Mohan Malaviya University of Technology, 10 15 15
Gorakhpur-273010,Uttar Pradesh, India.

Defence Metallurgical Research Laboratory,

95 Kanchanbagh P.O., Hyderabad 500 058, 7 4 2
India.

Department of Mechanical Engineering, Madan

96 Mohan Malaviya University of Technology, 6 5 0
Gorakhpur-273010, Uttar Pradesh, India.

Department of Mechanical Engineering, IIT

97 9 5 4
Kharagpur, West Bengal- 721302, India

Assistant Professor, Department of Mechanical

98 Engineering, Deccan College of Engineering & 10 7 3
Technology, Hyderabad,Telangana State, India.

Department of Engineering, Ayatollah Amoli

99 9 5 4
Branch, Islamic Azad University, Amol, Iran.
 Department of Mechanical Engineering,
100 JNTUH College of Engineering Kukatpally, 8 9 6
Hyderabad, Telangana-500085

Department of Mechanical Engineering,IIT

101 10 4 3
Guwahati,Assam-781039,India

Department of Mechanical Engineering, IIT

102 9 8 5
Kharagpur, Kharagpur 721302, India

Department of metallurgical
103 9 8 4
engineering,JNTUCEH,Kukatpally,Hyd-72

Department of Mechanical Engineering, BITS-

104 Pilani, Hyderabad Campus, Hyderabad 10 14 13
500078

BITS-Pilani Hyderabad Campus Hyderabad,

105 9 6 5
Telangana, India

Department of Mechanical Engineering,

106 10 13 0
GRIET, Hyderabad, AP India 500090.

Department of Mechanical Engineering ,

107 9 6 6
GRIET, Bachupally, Hyderabad-500072, India

Gokaraju Rangaraju Institute of Engineering

108 9 6 6
and Technology, Hyderabad, 500090, India.
 PG Student,Mechanical Engineering
109 Department,National Institute of Technology, 8 10 10
Warangal, India-506004

aDepartment of Mechanical Engineering,

110 9 2 1
MVGRCE, Vizianagaram, AP, India

Department of Engineering, Bandar Abbas

111 Branch, Islamic Azad University, Bandar 6 1 0
Abbas,Iran

Asst. Prof, Department of mechanical

112 7 2 2
Engg.,UCEK,JNTU KAKINADA, A.P, INDIA

PhD Scholar, Mechanical Engineering Deptt.,

113 Dr. B.R. Ambedkar NIT Jalandhar, Punjab, 8 16 15
144011, India

Department of Mechanical Engg., College of

114 Engineering ,Andhra University, 5 2 2
Visakhapatnam,530 003, Andhra Pradesh, India

PhD Student, M.E.D, SVNIT, Surat, 395007,

115 10 8 8
India.

116 Department of Mechanical Engg, Government 8 5 5

Polytechnic Nagpur, Maharastra state,india
 Research Scholar,Dr.Babasaheb Ambedkar
117 8 0 0
Marathwada UniversityAurangabad

Department of Mechanical engineering,

118 JNTUH College of Engineering, Kukatpally, 6 0 0
Hyderabad, Telangana state, India

Department of Mechanical Engineering,

119 JNTUH College of Engineering, Kukatpally, 6 0 0
Hyderabad, Telangana State, India

Phd Research Scholar, Department of

120 Mechanical Engineering BITS Pilani 8 10 10
Hyderabad Campus, Hyderabad 500078, India

Assistant Professor, Chandigarh Univeristy,

121 9 8 5
Gharuan, Punjab, India

Department of Mechanical Engineering,

122 National Institute of Technology Warangal, 10 6 3
Warangal, Telangana-506004, India

Department of Mechanical Engineering,

123 National Institute of Technology Warangal, 7 7 6
Telangana, India, 506004.

Mechanical Engineering Department,National

124 Institute of Technology, Warangal, India- 9 7 5
506004
 Department of Mechanical Engineering,
125 7 6 6
MVGRCE, Vizianagaram, India.

Mechanical and Automotive Engineering

126 Department, Delhi Technological University, 10 6
Delhi-110042, India

Assistant Professor, Pimpri Chinchwad Collage

127 10 13 12
of Engineering, Pune,Maharashtra, India.

128 St.John College of Engineering and Technology 7 1 1

Department of Mechanical Engineering,

129 National Institute of Technology Warangal, 6 4 3
Warangal, Telangana, India
Research Scholar, Department of Mechanical
Engineering, School of Engineering, Amrita
130 7 1 0
Vishwa Vidyapeetham, Bangalore Campus,
Karnataka, Indi
Assistant Professor,Mech. Engg. Deptt., Malout
Institute of Management & Information
131 10 7 4
Technology(MIMIT), Malout(Punjab)-
152107,India

Assistant Professor, Department of Mechanical

132 Engineering, MIMIT 9 5 4
Malout,Punjab,152107,India

Department of Mechanical Engineering,

133 National Institute of Technology Warangal, 7 10 9
Telangana - 506004.
 Department of Metallurgical and Material
Science Engineering
134 National Institute of Technology, Durgapur- 5 2 0
713209, West Bengal, India.

Department of Mechanical Engineering ,Beant

135 College of Engineering and Technology, 7 4 4
Gurdaspur, Punjab - 143521, India

Research Scholar
Department of Mechanical
136 Engineering,National Institute of Technology, 7 5 2
Manipur- India-795004.

Assistant Professor in ME Department,

137 V.R.Siddhartha Engineering College, 7 3 3
Vijayawada.

Department of Productin & Industrial

138 Engineering, M.B.M. Engineering College, 10 4 4
Jodhpur, 342005 India

Mechanical Engineering Department,

139 Government Engineering College, Bhavnagar, 6 6 4
Gujarat 364002, India

Mechanical Engineering Department, ITER,

140 11 8 4
SOA University, Bhubaneswar, 751030, India
 Research Scholar, Aacharya Nagarjuna
141 5 3 2
University,AP,India,.

Defence Metallurgical Research Laboratory,

Kanchanbagh P.O., Hyderabad 500 058,
142 India. 6 10 9
Abstract

143 Institute For Plasma Research, Gandhinagar 9 12 6

Mechanical Engineering Department, MANIT,

144 8 6 6
Bhopal

National Institute of Technology, Agartala-

145 8 6 0
799046, India

Terminal Ballistics Research Laboratory,

146 8 16 12
Sector-30 D, Chandigarh-160030, India

Department of Production Engineering,

147 National Institute of Technology, Trichy, 9 4 3
Tamilnadu, India-620015

Mechanical Engineering Department, The M. S.

148 8 13 12
University of Baroda, India

Department of Mechanical Engineering,

149 8 4 1
University College of Engineering,
 Research Scholar, Department of Mechanical
150 8 15 13
Engineering,NITSilchar, Assam, India

Department of Engineering, Faculty of

151 Industrial Technology, Songkhla Rajabhat 9 10 9
University, Songkhla, Thailand

Professor, Department of Mechanical

152 Engineering, S.A. Engineering College, 9 5 5
Chennai 600 077, Tamilnadu, India

Associate Professor, Department of Mechanical

153 Engineering Gokaraju Rangaraju Institute of 8 12 12
Engg & Technology, Hyderabad

Associate professor, Dept. of Mechanical

154 9 11 11
Engineering GRIET, Hyd-90, India

Department of Mechanical Engineering,Indian

486 10 8 6
Institute of Technology,Guwahati-781039,India

Dept. of Mechanical Engineering, National

156 Institute of Technology Kurukshetra, 7 4 4
Kurukshetra 136119, India

157 Assistant professor,YCCE,Nagpur441110,India 9 4 4

 UG Student,Sandip Foundations SITRC,
158 9 17 14
Nashik 422213, India

Assistant Professor, K L University,

159 10 9 8
Vaddeswaram, Guntur, 522502,India

Jadavpur University,188 Raja S.C.Mallick

160 9 1 1
Road, Kolkata 700032, India

Assistant Professor, Department of Mechanical

161 Engineering ,VNRVJIET, Hyderbad-500 090 12 7 6
Telangana, India

Department of Mechanical Engineering, Sandip

162 Institute of Technology & Research Centre, 9 6 6
Nashik (Maharashtra), India

Dept.of Mechanical Engineering, Osmania

University, Hyderabad-500007,Telangana,
163 9 12 11
IndiabDept. of Mechanical Engineering,
GRIET,Hyderabad.

Department of Mechanical
164 9 0 0
Engineering,MANIT, Bhopal, India

Professor& Head, Department of Mechanical

165 Engineering, Osmania University College of 8 4 3
Engineering, Hyderabad, Telangana, India

166 Jadavpur University, Kolkata - 700 032, India" 10 1 0

167 SMBS,Vit University, Vellore,Tamilnadu,India 7 8 6

Instruments Research & Development

168 Establishment, DRDO, Ministry of Defence, 10 14 0
Dehradun-248008, India

Research Scholar, K L University,

169 8 3 3
Vaddeswaram, 522502, India

Department of Mechanical Engineering,

170 10 7 2
Osmania University, India

Marine and Coastal Resource Institute, Prince

171 8 10 7
of Songkla University, Songkhla, Thailand

Professor& Head, Department of Mechanical

172 Engineering, Osmania University College of 9 13 6
Engineering, Hyderabad, Telangana, India

Associate Professor, Department of Mechanical

173 Engineering, CEG, Anna University, Chennai 8 3 0
600 025, India

Depaertment of Mechanical Engineering, CEG

Campus, Anna University, Chennai 600 025,
174 India 7 5 4

Department of Mechanical Engineering,

175 SVCET, RVS Nagar, Chittoor - 517127, A.P., 10 13 12
India
 Sr. Assistant Professor, Dept. of Mech. Engg.,
176 9 16 14
MJCET, Hyderabad-34, INDIA

Ph.D research scholar, Department of

177 Mechanical Engineering, AMET University, 7 1 0
Chennai, India

Research Scholar, Maulana Azad National

178 Institute of Engineering and Technology, 9 1 0
Bhopal, India- 462003

Maulana Azad National Institute of Technology,

179 9 0 0
Bhopal, Madhya Pradesh-462003, India

Department of Mechanical Engineering, Madan

Mohan Malaviya University
180 10 10 0
of Technology, Gorakhpur-273010, India

bAssociate Professor, Department of

181 Mechanical Engineering, Birla Institute of 10 11 10
Technology,Mesra,Ranchi,835215,India

Asst. Professor Mech. Engg. Dept, K L

182 9 9 6
University, Guntur, India

Professor Production Engineering Department,

183 8 4 2
GNDEC, Ludhiana 141006, India

Department of Mechanical Engineering,

184 National Institute of Technology, Hamirpur 9 12 4
177005, India
 Department of Mechanical Engineering, Asra
186 College of Engg. & Technology, 10 14 14
Sangrur148001 (India)

Research Scholar, Department of Mechanical

186 Engineering, A.U College of Engineering, 8 7 7
Visakhapatnam, Andhrapradesh, India.

Professor,Mechanical Engineering Depatment

VTU, Sambhram Institute of Technology, MS
187 10 4 3
Palya, Jalahalli E, Bangalore 560097,
Karnataka,

IDepartment of Mechanical Engineering,

88 Maulana Azad National Institute of Technology, 9 1 1
Bhopal (M.P.), India

Assistant Professor, Department of Mechanical

189 Engineering, MALLA REDDY COLLEGE OF 9 8 8
ENGGHyderabad,A.P,

Associate professor, Department of Production

190 Engineering, National Institute of Technology, 8 3 3
Trichy-620015, Tamilnadu, India

Assistant Professor, Dept. of Chemical

191 8 3 2
Engineering, MNIT, Jaipur 302017, India

192 College of Engineering, Pune-411005 6 8 8

PGscholar,Vishwakarma Institute of
193 Information Technology, Kondhwa,Pune 10 3 3
411048
 Department of Mechanical Engineering, Madan
Mohan Malaviya University of Technology,
194 10 7 0
Gorakhpur-273010, Uttar Pradesh, India

195 M.E.S. College of Engineering,Pune, India. 7 8 7

Research Scholar, Department of Mechanical

196 Engineering, National Institute of Technology, 8 3 2
Warangal-506004, India

Research Scholar, Madhav Institute of

197 7 13 13
Technology & Science, Gwalior, 474005

UOH,Gachibowli, Hyderabad,Telangana.
198 7 0 0
INDIA

199 K.L.University, E.C.E. Dept. 10 12 8

Department of Physics, University College of

200 4 0 0
Engineering Arni,Arni-632326.India

Mechanical Engineering Department, Birla

201 Institute of Technology and Science,Pilani, 9 3 1
Pilani Campus (Rajasthan)-333031, India

Department of Mechanical Engineering,

202 Maulana Azad National Institute of Technology, 10 4 0
Bhopal (M.P.), India
 Gokaraju Rangaraju Institute of Engineering
203 10 5 5
and Technology, Hyderabad, 500090,India

Assistant Professor Department of Mechanical

204 Engineering, FST, IFHE, Hyderabad, 501 203, 6 4 4
India

Student, Dept. of Mechanical Engg., BITS

205 10 5 4
Pilani, Pilani-333031,India

MPSTME, SVKMS Narsee Monjee Institute

206 of Management Studies Shirpur, Dhule 425405, 6 3 3
Maharashtra, India.

Asst. Professor Mech. Engg. Dept, K L

207 11 6 5
University, Guntur, India

Dept. of Mechanical Engineering, Malnad

208 College of engineering.Hassan / VTU- 8 5 4
Belagavi.India-573202.

Asst. Professor,Dept. of Mech. Engg.,

209 Viswajyothi College of Engineering and 9 5 4
Technology, Kochi-6866702

Mechanical Engineering Dept., NIT Warangal,

210 9 7 3
Warangal, Telangana State, INDIA, 506004

Assistant Professor Department of Mechanical

211 Engineering, YMCA University of Sc. 9 6 5
&Technology, Faridabad, India
 Dept. of Mechanical Engineering, NIT
212 Warangal, Warangal, Telangana State, INDIA, 6 5 4
506004

Associate Professor, Department of Automobile

213 8 7 7
Engg., VNR VJIET, Hyderabad, India.

Department of Mechanical Engineering,

National Institute of Technology, Manipur-
214 8 3 1
India-795001

215 Ajmer, Rajasthan, 305 002, India 6 3 3

Department of Mechanical Engineering

Science, University of Johannesburg, Auckland
216 6 3 1
Park Kingsway Campus, Johannesburg, 2006,
South Africa.

Research Scholar, SGGSIET, Nanded 431606,

217 9 4 4
India.

Mechanical Engineering Department, Jadavpur

218 9 5 0
University, Kolkata 700032, India
 Department of Mechanical Engineering,
219 Bundelkhand Institute of Engineering and 7 4 4
Technology, Jhansi, Jhansi 284128, India

Research Scholar, Department of Mechanical

220 Engineering, National Institute of technology, 10 8 7
warangal-506004, India
Department of Mechanical Engineering,
National Institute of Technology Karntaka,
221 Surathkal, 7 5 5
Mangalore-575025, Karnataka, India.

DRDO , VAHAN NAGER ,AHMEDNAGER,

222 10 31 31
MAHARASHATRA INDIA PIN 414006

Professor, MKSSSs Cummins C.O.E. for

223 10 1 0
women, Pune, India
Department of Mechanical Engineering, Aditya
224 Institute of Technology and Management, 10 2 1
Tekkali, A.P, INDIA

School of Mechanical Engineering, KIIT

225 10 3 3
University,Bhubaneswar, Odisha

Department of Mechanical Engineering,

226 National Institute of Technology Warangal, 7 7 6
Warangal -506004, India

Department of Mechanical Engineering,

227 Bundelkhand Institute of Engineering and 8 3 1
Technology, Jhansi 284128, India
 Division of Manufacturing Processes and
228 automation Engineering, Netaji Subhas Institute 6 1 1
of Technology, New Delhi, India

Assistant Professor, Mechanical Engineering

Department, S. V. National Institute of
229 10 6 5
Technology, Surat, Ichchhanath, Surat -
395007, India
Research scholar, Department of Production
230 Engineering, SGGS IE&T, Nanded 431 606, 10 6 6
India

Research Scholar, Dept. of Mechanical

231 Engineering, K L University, Vaddeswaram, 10 8 8
Guntur District, India

Assistant Professor, Department of Mechanical

232 Engineering, Sri Krishna College of Engg. & 24 16 16
Technology, CBE, India

Department of Production Engineering,

233 National Institute of Technology, 10 7 5
Tiruchirappalli-620015, Tamilnadu, India

234 Dept. Mechanical Engg, Kakatiya Institute of Technology

8 & Science, Warangal,506015,
2 2 [email protected]
 DepartmentofMechanicalEngineering,Maulana
235 AzadNationalInstituteofTechnology,Bhopal(M. 13 1 0
P.),India

Mechanical Engineering Department, ITER,

236 10 6 6
SOA University, Bhubaneswar, 751030, India

237 Manipal University Jaipur 302007, India 9 6 4

Department of Mechanical Engineering,

238 Yeshwantrao Chavan College of 8 2 2
Engineering,Wanadongri 441110, Nagpur, India

Department of Mechanical Engineering,

239 Maulana Azad National Institute of Technology, 9 4 0
Bhopal (M.P.), India

Assistant Professor, Mechanical Engineering

240 Department, MANIT Bhopal-462051(M.P.) 9 5 5
India

aAssistant Professor, Department of

Mechanical Engineering, Aarupadai Veedu Inst.
241 9 5 3
of Technology, Kanchipuram 603104,
Tamilnadu, India

Department of Mechanical Engineering,

242 Bapatla Engineering College, Bapatla, A.P, 6 2 1
India

Mechanical Engineering Department, MANIT,

243 10 11 11
Bhopal, India

Assistant Professor, Mechanical Engineering

244 Department, National Institute of Technology 9 0 0
Agartala,Tripura(W), India
 Mechanical Department, National Institute of
245 Technology Rourkela, Rourkela, Odisha 10 8 8
769008, India

Research Scholar Dept. of Mechanical

246 10 5 5
Engineering,GIT, GITAM University, AP, India,

Assistant Professor, GITAM

247 10 9 9
University,Hyderabad and 502329, India

Research Scholar, School of Mechanical

Engineering, Vignans Foundation for Science
248 7 4 3
Technology & Research,Guntur,
Andhrapradesh,,India

aAssistant Professor, Dept. of Mechanical

Engineering, Sri Venkateswara University
249 College of Engineering, 10 17 15
Tirupati-517502, A.P., India

Department of Mechanical Engineering, DCET,

250 10 13 12
Dar-us-salam, Hyderabad -500 001

Mechanical Department, National Institute of

251 Technology Rourkela, Rourkela, Odisha 9 8 1
769008, India
 Professor, VNR-VJIET, Bachupally,
252 10 16 16
Hyderebad-500090, INDIA

Department of Mechanical Engineering, G.H.

253 Raisoni College of Engineering and 9 6 1
Management, Pune-412207, India

Assistant Professor, Department of Mechanical

254 Engineering, V.R Siddhartha Engineering 8 8 8
College, Vijayawada, A.P, India.

Department of Mechanical Engineering,I.T.E,R,

255 S.O.A University,Bhubaneswar, Odisha-751030 10 5 3
,India

Dept. of Mechanical Engineering, National

256 Institute of Technology Kurukshetra, 6 2 1
Kurukshetra 136119, India

Department of Mechanical Engineering, K L

257 University, Vaddeswaram, Guntur, Andhra 7 4 4
pradesh, India.

Associate Professor, Mechanical Engineering

Department, Birla Institute of Technology &
258 9 3 0
Science Pilani, Pilani Campus (Rajasthan)-333
031
 Department of Mechanical Engineering, School
259 of Engineering, Amrita Vishwa Vidyapeetham, 6 3 3
Bangalore Campus, Karnataka, 560035, India.

Professor and Dean, Department of Mechanical

260 Engineering, East Point College of Engineering 10 9 7
and Technology, Bangalore-560049, India

Mechanical & Industrial Engineering

261 Department, IITR, Roorkee-247667, 9 10 6
Uttarakhand

Professor, Mech. Engg. Dept, V. R. Siddhartha

262 8 14 4
Engineering College, Vijayawada, India

UIET, Panjab University, Sector-25,

263 10 5 5
Chandigarh-160014, India

Associate Professor, Department Of

264 Mechanical Engineering, Birla Institute of 6 7 4
Technology, Mesra, Ranchi 835215, India

Assistant professor, Department of Mechanical

484 Engineering,NSN College of Engineering and 8 6 6
Technology, Karur-639003, India.

Assistant Professor Department of Mechanical

266 Engineering, GLA University,Mathura 281 406, 9 6 5
India
 Professor and PG Co-ordinator (Thermal Power
267 Engineering), Mechanical Engineering 3 9 9
Department, RYMEC Bellary, Karnataka, India

Department of Mechanical Engineering,

268 JNTUH College of Engineering, Kukatpally, 9 11 11
Hyderabad, Telangana State, India

PG Scholar, Mechanical Engineering

269 10 8 1
Department VIIT Pune, Pune 411048, India

Professor, Mechanical Engineering Department,

270 14 20 20
SIRTS ,Bhopal , 462041, India.
Mechanical Engineering Department,National
272 Institute of Technology, Warangal, India- 6 2 1
506004
Department of Mechanical Engineering,
V.R.Siddhatha Engineering College,
273 Vijayawada 520 007, 7 13 13
Andhra Pradesh, India

Department of Mechanical and Manufacturing

274 Engineering,M S Ramaiah University of 6 6 5
Applied Sciences, Bengaluru-58, India

Department of Mechanical Engineering ,I.G.I.T,

275 8 9 9
Sarang, Dhenkanal, Odisha, India

Professor Mechanical Department MANIT

276 7 4 4
Bhopal (M.P.), 462051 India
 Indian Institute of Technology Patna, Patna
277 7 6 4
801118, Bihar, India

278 M.E.S. College of Engineering, Pune, India 6 8 4

Mechanical Engineering Department, Punjabi

279 8 4 4
University, Patiala-147002, India

Associate Professor
Vel Tech University, Avadi, Chennai-600062,
280 6 4 1
Tamilnadu, India

PG Scholar ,Mechanical Engineering

281 Department Sinhgad Institute of Technology & 9 10 10
Science, Narhe, Pune411041, India

B.TechStudent,MechanicalEngineeringDepartm
282 ent,MaulanaAzadNationalInstituteoftechnology, 10 12 8
Bhopal

Department of Mechanical Engineering,

283 Sinhgad Institute of Technology and Science, 6 3 3
Pune-411041 India.

Mechanical Enginering Department,Delhi

284 8 5 5
Technological University, Delhi, India -110042

Research Scholor, Sathyabama University,

285 9 13 12
Chennai 600119, India
BMS Institute of Technology & mgmt,
286 Department of Mechanical 6 3 2
Engineering,Bengaluru-64,India
 Mechanical Engg. Department, BITS Pilani
287 9 5 4
Hyderabad Campus 500 078

P.G Scholar,Mech. Engg. Dept, PVPSIT,

288 10 18 18
Vijayawada, India

Research Scholar, Maulana Azad National

289 6 5 4
Institute of Technology, Bhopal, 462003, India

Suman Ramesh Tulsiani Technical Campus-

290 9 5 5
Faculty of Engineering, Khamshet, Pune, India

Department of Mechanical Engineering,

291 Sinhgad Institute of Technology and Science, 9 9 8
Pune, Maharashtra-411041. India

Research Scholar,
Department of Mechanical Engineering,
292 National Institute of Technology 9 9 7
Silchar,788010, India

Associate Professor,Department of Mechanical

293 Engineering, GRIET, Hyderabad - 500 090, 10 7 5
India
Department of Aerospace Engineering and
Appiled Mechanics, Indian Institute of
294 10 6 5
Engineering Science and Technology, Shibpur,
Howrah 711103, India

aPVP Siddhartha Institute of Technology,

295 9 4 4
Kanuru, Vijayawada, India
 Assistant Professor MPSTME NMIMS Shirpur,
296 7 7 7
Maharashtra, India.

Ph.D. Scholar, Dr. K.N. Modi University,

297 13 14 8
Newai, Rajasthan, India.

Department of Mechanical Engineering,

298 National Institute of Technology Warangal, 7 5 5
Telangana,India - 506004.

Assistant Professor, Dept. of Mechanical &

299 Automation Engineering, Amity University 9 15 15
Rajasthan, Jaipur 303007, India

Research scholar, Department of Mechanical

300 Engineering, National Institute of Technology 7 6 6
Silchar Assam 788010 India

Jawaharlal Nehru Technological University

301 9 9 9
Hyderabad 500085 India

JNTUH College of Engineering, Kukatpally,

302 8 12 12
Hyderabad, Telangana State, Pin:500085, India
 Dept. of Mechanical Engineering, MPSTME,
SVKMs Narsee Monjee Institute of
Management Studies (NMIMS),Shirpur
303 7 10 8
Campus,
Dhule-425405,Maharashtra, India

Dept. of Mechanical Engineering, MPSTME,

SVKMs Narsee Monjee Institute of
Management Studies (NMIMS),Shirpur
304 6 11 11
Campus,
Dhule-425405,Maharashtra, India

Assistant Professor,Mechanical Engineering

305 15 13 13
Deptt., SCET,Faridabad,Haryana, India

Department of Mechanical Engineering

306 6 0 0
M.A.N.I.T, BhopaL-462051, India

Manav Rachna International University,

307 8 3 2
Faridabad, 121001,India

Department of Mechanical Engineering, Madan

308 Mohan Malaviya University of Technology, 9 14 12
Gorakhpur-273010, Uttar Pradesh, India

Department of Mechanical Engineering, NIT

309 5 10 10
Warangal , Warangal, India-506004
 Mechanical Engineering Department, MANIT,
310 5 1 1
Bhopal 462003, India

Department of Mechanical Engineering, Amrita

311 school of Engineering, Amrita Vishwa 8 8 8
Vidyapeetham, Bangalore, 560 035, INDIA

Asst. prof. & Reasearch Scholar JNTUCEH,

312 Department of Mechanical Engineering, 10 15 15
GRIET, Hyderabad, Telangana ,India
Department of Mechanical Engineering, Indian
313 Institute of Technology Patna, Patna 801103, 6 8 8
India

Department of Mechanical Engineering,

314 Maulana Azad National Institute of Technology, 6 2 1
Bhopal (M.P.),India

Mechanical Engineering Department, Maulana

315 Azad National Institute of Technology, Bhopal, 10 12 9
India

Department of Mechanical Engineering,

316 6 2 1
Invertis University, Bareilly, India

DepartmentofMechanical Engineering, Malnad

College ofEngineering,Hassan-573202,
317 9 0 0
Visvesvaraya Technological University,
Belagavi, Karnataka, India
 M. Tech. Student, Department of Mechanical
318 7 5 3
Engineering, MANIT, Bhopal, (M.P.), India

DepartmentofMechanical Engineering, Malnad

College ofEngineering,Hassan-573202,
319 6 0 0
Visvesvaraya Technological University,
Belagavi, Karnataka, India.

Assistant Professor, Department of Mechanical

320 Engineering, FST, IFHE, Hyderabad, 501 203, 10 5 5
India

Professor, P.E.S college of Engineering,

321 5 4 0
Mandya-571401, Karnataka, India.

Research Scholar,Department of Mechanical

322 Engineering, YMCA University of Sc.& 6 1 1
Technology, Faridabad,121001, India

Assistant professor,Inderprastha Engineering

323 10 4 3
College,Ghaziabad, Utter Pradesh, India

Research Scholar, Mechanical Engineering

324 Department GNDEC, Punjab Technical 7 4 4
University, Ludhiana 141010, Punjab, India

St. Marys Integrated Campus, Hyderabad,

325 6 2 2
India
 JNTUH College of Engineering, Kukatpally,
326 8 12 11
Hyderabad, Telangana State, Pin:500085, India

Ph.D Research Scholar, Department of

327 Manufacturing Engineering, National Institute 9 2 2
of Technology, Jamshedpur, 831014, India

Department of Mechanical Engineering, Madan

Mohan Malaviya University of Technology,
328 10 8 4
Gorakhpur-273010, Uttar Pradesh, India

329 Asst. Professor K L University, Guntur,, India 10 27 28

Sri Sairam Institute of Technology, West

330 10 7 2
Tambaram, Chennai-600044, India

Department of Engineering, Bandar Abbas

111 Branch, Islamic Azad University, Bandar 19 17 2
Abbas,Iran

Research Scholar, Department of Production

332 Engineering, National Institute of 10 8 5
Technology,Trichy, India

Faculty of Engineering, Computing and

Science, Swinburne University of Technology,
333 8 3 3
Sarawak Campus, Jalan Simpang Tiga, 93350,
Kuching, Sarawak, Malaysia
 Department of Physics, GITAM Institute of
334 Science, GITAM University, Visakhapatnam 8 5 0
530 045, A.P, India

Material Science and Metallurgical

Engineering, Maulana Azad National Institute
335 6 6 6
of Technology- Bhopal, M.P., India

P.G.Scholars, Mechanical Department, PVPSIT,

336 10 13 12
Kanuru, Vijayawada 07, A.P, India.

Assistant Professor, School of Mechanical

337 Engineering, Lovely Professional University, 7 7 7
Phagwara, Punjab, 144401, India

Sri Sairam Institute of Technology, West

338 10 7 2
Tambaram, Chennai-600044, India

Department of Physics, GITAM Institute of

339 Technology, GITAM University, 7 4 0
Visakhapatnam 530 045, A.P, India

Research Scholar, Production and Industrial

Engineering Department, PEC University of
340 10 0 0
Technology, Sector-12, Chandigarh 160012,
India

Assistant Professor, Chandigarh Univeristy,

121 9 5 5
Gharuan, Punjab, India

Department of Mechanical Engineering, School

342 of Engineering, Tezpur University, Tezpur, 10 5 2
Assam-784028, India
 Jadavpur University, Mechanical Engineering
343 9 4 3
Department, Kolkata, 700032, India

School of Mechanical Engineering, KIIT

344 10 10 9
University, Bhubaneswar-751024, India

Department of Mechanical Engineering

345 6 2 2
,BVBCET, Hubli-580031,India

Ph.D Scholar, Department of Mechanical

Engineering, Maulana Azad National Institute
346 8 9 9
of Technology Bhopal -462003, Madhya
Pradesh,

Dept. Of Mechanical Engineering, SV

347 University, Tirupati-517502, Andhra Pradesh, 10 13 13
India

Department of Physics,Dayananda Sagar

348 College of Engineering, Bangalore 560 078, 7 5 4
India

1Division of Materials, Mechanics and

Structures, Center of Nanotechnology and
349 9 6 6
Advanced Materials, Faculty of Engineering,
University of Nottingham Malaysia Campus

Associate Professor, Mechanical Department,

350 RMK College of Engineering and Technology, 9 5 3
Tamil Nadu 601206, India

School of Mechanical Engineering, KIIT

351 10 5 5
University, Bhubaneswar, Odisha, India
 Department of Mechanical Engineering,
352 Kakatiya Institude of Technology and Science, 10 5 4
Warangal- 506015, Telangana.

Student, ITER, SOA University,

353 10 14 9
Bhubaneswar, 751030, India

aMechanical Engineering Department, NIT

334 9 6 3
Warangal, Warangal and 506004, India

Department of Metallurgical and Materials

Engineering, Indian Institute of Technology
355 10 9 3
Roorkee-247667, Uttarakhand, India

Research scholar, Department of Mechanical

356 10 4 4
Engineering. SVNIT, Surat-395007, India.

Mechanical Engineering Department, Jadavpur

357 University, Kolkata-700032, West Bengal, 10 7 1
India.

Research scholar, Department of Mechanical

358 Engineering, St. Peters University, Chennai, 9 7 6
India.

Mechanical Engineering Department, MANIT,

359 7 12 8
Bhopal, India.
 Asst. Professor, Mechanical Engineering
360 Department, V.R. Siddhartha Engineering 6 4 4
College, Vijayawada, India.

Department of Mechanical Engineering,

361 G.Pulla Reddy Engineering 6 3 3
College(Autonomous): Kurnool -518 007, India

Research Scholar, Department of Mechanical

362 Engineering, Acharya Institiute of Technology, 9 10 6
Bangalore, Karnataka, India

Assistant Professor, Mechanical Engg.

363 Department, V R Siddhartha Engg College, 8 5 4
Vijayawada.

aResearch Scholar, Department of Mechanical

364 9 4 3
Enginerering, MANIT,Bhopal-462003, India

Faculty of Engineering, Computing and

Science, Swinburne University of Technology
365 8 5 3
Sarawak Campus, Jalan Simpang Tiga, 93350
Kuching, Sarawak, Malaysia

Research Scholar, G. Pulla Reddy Engineering

366 8 5 5
College, Kurnool 518007, India

Department of Mechanical Engineering,

367 Matrusri Engineering College Saidabad, 6 11 11
Hyderabad.

Department of Mechanical Engineering,

368 Madhav Institute of Technology & Science, 9 3 3
Gwalior- 474005, India (M.P)
 MPSTME, SVKMS NMIMS University,
369 6 5 2
Dhule 425405, Maharashtra, India.

Department of Mechanical Engineering,

370 S.R.K.R. Engineering College, Bhimavaram- 9 7 5
534204,Andhra Pradesh, India

Researcher, Trddc, Tcs Innovation Labs, Pune,

371 10 12 12
India, 411013

Department of Mechanical Engineering,

372 8 5 4
Punjabi University, Patiala-147002, India

Asst Professor, Department of Mechanical

373 Engineering, Ganadipathy Tulsis Jain 7 4 4
Engineering College, Vellore, India.

Production Engineering Department, NIT

374 10 4 0
Agartala 799046, India

Amrita Vishwa Vidyapeetham University,

375 9 9 8
Bangalore-560035, India

Department of Mechanical Engineering, Beant

376 college of Engineering and Technology, 9 7 3
Gurdaspur-143521, India

Department of Mechanical Engineering, BITS-

377 10 19 19
Pilani, Hyderabad, 500078, India.
 Research Scientist, I.I.T Madras,chennai-
378 7 2 0
600036, India

Department of Mechanical Engineering,

379 10 17 17
MANIT Bhopal, MP, India

Department of Mechanical Engineering, Indian

Institute of Engineering Science and
380 10 8 7
Technology, Shibpur, Howrah-711103, WB,
India

College of Engineering Pune, Department of

381 10 6 6
Mechanical Engineering, Pune 411005, India

Department of Physics, Amity School of

Applied Sciences (ASAS), Amity University
382 Rajasthan, NH-11C, Jaipur- Delhi National 8 7 5
Highway, RIICO Industrial Area, Kant Kalwar,
Jaipur (Rajasthan), 302006, India

383 Juniour research fellow 7 6 3

Research scholar,School of Applied

384 sciences,Kiit University,Bhubaneswar- 9 8 5
751024,Odisha,India

Professor, School for Mechanical and Building

Sciences, VIT University, Vellore-632014, India
385 8 2 0
 Professor, Department of Mechanical
386 Engineering, Sri Sai Ram Engineering College, 4 2 2
Chennai - 600044,TamilNadu, India.

Mechanical Engineering Department,

387 10 9 8
MANIT ,Bhopal ,462051, India

Professor, Department of Mechanical

388 Engineering, Sri Sai Ram Engineering College, 5 5 5
Chennai - 600 044, Tamil Nadu, India

aMechanical Engineering Department, V.R.

389 Siddhartha Engineering College, Vijayawada- 10 4 4
520 007,A.P, India

Department of Mechanical Engineering, T. John

390 Institute of Technology, Bangalore 10 7 6
-560083,Karnatak, India.

Research scholar, Department of Mechanical

391 Engineering, St. Peters University, Chennai, 10 12 11
India.

Mechanical Engineering Department, MANIT,

392 7 5 2
Bhopal, India

Department of Mechanical Engineering,

393 Motilal Nehru National Institute of Technology 9 9 9
Allahabad, 211004, India
 Department of Mechanical Engineering,
394 10 12 10
Jadavpur Univerity, Kolkata-32, India

Mewar University, Mewar,Chittorgarh,

395 9 10 10
Rajasthan, India

Ph.D.Scholar, Foundation for Science

396 Technology and Research (VFSTR), 6 6 6
Vadlamudi, Guntur, AP, India

Mechanical Engineering Department,

MANIT ,Bhopal ,462051, India
397 9 8 5
Abstract

Assistant Professor, Department of

398 10 6 1
CivilEngineering, MANIT, Bhopal, MP, India.

Research Scholar, Department of Mechanical

399 10 12 11
Engineering, MANIT Bhopal, 462051, India

Assistant Professor, Department of Mechanical

400 8 10 0
Engineering, MANIT, Bhopal, (M.P.), India
 Research Scholar, Department of Mechanical
401 8 0 0
Engineering, MANIT Bhopal, 462051, India

Asst. Professor Mech. Engg. Dept, K L

402 10 12 12
University, Guntur, India

aAssistant Professor, Department of

403 Mechanical Engineering, RJIT, Tekanpur, 7 5 5
Gwalior, (M.P.), India

Assistant Professor, Department of Mechanical

404 Engineering,Amrita Vishwa Vidyapeetham, 10 9 9
Bengaluru, 560035,India

CSIRAdvanced Materials and Processes

405 7 5 1
Research Institute, Bhopal, India.

Professor, Meenakshi College of Engineering,

406 5 2 2
Vadapalani, Chennai, India

Mechanical Engineering Department, Amrita

407 School of Engineering, Amrita Vishwa 7 9 9
Vidyapeetham, Bangalore

Research Scholar, Department of Mechanical

408 10 17 7
Engineering, MANIT Bhopal, 462051, India
 Professor,Department of Civil
409 Engineering,Rajalakshmi Engineering College, 9 13 5
Thandalam, Chennai-602 105, Tamilnadu,India

Department of Mechanical Engineering,

410 8 2 1
MANIT, Bhopal

Research Scholar,Mechanical Engineering

411 7 7 6
Department ,NIT Warangal,506004,India

Pimpri Chinchwad Polytechnic Pune,

412 8 8 3
Mahararashtra, India

Pimpri Chinchwad Polytechnic Pune,

413 8 7 5
Mahararashtra, India

Research Scholar, Department of Mechanical

414 Engineering, Thapar University, Patiala, 7 4 4
147004, India

Department of Mechanical Engineering, Madan

Mohan Malaviya University of Technology,
415 10 5 0
Gorakhpur-273010, Uttar Pradesh, India

Department of Mechanical Engineering, M S

416 Ramaiah Institute of Technology, Bangalore 10 7 7
-560054, India

Bhai Gurdas Institute of Engineering &

417 10 7 2
Technology, Sangrur 148001, India
 1CSIR - Advance Materials Processes Research
418 Institute (AMPRI), Bhopal (M.P.), India 7 7 5
462026

Asst. Professor,Dept. of Mech. Engg.,

419 Viswajyothi College of Engineering and 10 4 4
Technology, Kochi-686670-India

PDPM Indian Institute of Technology, Design

420 9 3 3
and Manufacturing, Jabalpur, 482005, India

Department of Mechanical Engineering ,Beant

421 College of Engineering and Technology, 9 4 3
Gurdaspur, Punjab - 143521, India

Chemical Engineering Department, Maulana

422 Azad National Institute of Technology,Bhopal 6 8 8
462 051, India

Assistant Professor, Mechanical Engineering

423 Department, Sinhgad Institute of Technology & 10 7 2
Science, Narhe, Pune 411041, India

Non-Ferrous Materials Technology

424 Development Centre(NFTDC), PO 7 7 7
Kanchanbagh, Hyderabad 500058, India.

Department of Mechanical Engineering,

425 National Institute of Technology, Srinagar, 7 2 2
Kashmir,190006, India
 Maulana Azad National Institute of Technology,
426 6 3 2
Bhopal, India, 462003

Mechanical & Industrial Engineering

427 6 11 5
Department, I. I. T, Roorkee,247667, India.

University of Johannesburg, APK campus,

428 Auckland Park, Johannesburg, 2006, South 8 4 2
Africa

Department of Mechanical Engineering,

429 Aligarh Muslim University, Aligarh, 202002, 9 5 4
INDIA

U.I.E.T., Panjab University, Chandigarh

430 8 3 2
-160014, INDIA

431 Institute For Plasma Research, Gandhinagar 10 4 2

Research Scholar, Department of Mechanical

432 Engineering, National Institute of technology, 10 6 3
warangal-506004, India

Department of Mechanical Engineering, SR

433 6 10 2
Engineering College, Warangal, T.S., India

Muffakham Jah College of Engineerng and

434 8 7 6
Technology, Hyderabad,500034, India

Assistant Professor, Mech. Engg. Dept., PVP

435 Siddhartha Institute of Technology, 10 6 4
Vijayawada,INDIA
 Department of Mechanical Engeering, Maulana
436 Azad National Institute of Technology, Bhopal- 9 5 0
462003, India

Department of Applied Sciences and

Humanities, National Institute of Foundry and
437 6 4 4
Forge Technology, Ranchi- 834003, Jharkhand
(INDIA)
J. Jeykrishnan Sri Sairam Engineering College,
438 Chennai 44, In 7 1 1

Department of Mechanical Engineering Indian

439 Institute of Technology (Banaras Hindu 10 2 2
University) Varanasi-221005, India

Research Scholar, Department of Mechanical

440 Engineering, National Institute of technology, 10 8 7
warangal-506004, India

Department of Mechanical Engineering, IIT

441 10 3 2
Guwahati, Guwahati, Assam-781039

Assistant Professor, Dept. of Mechanical

442 6 2 1
Engineering, GRIET, Hyderabad, India

Research Scholar,Department of Mechanical

443 Engineering,Maulana Azad National Institute of 5 3 3
Technology, Bhopal (M.P.) - 462003, India

Mechanical Engineering Department, NRI

444 9 2 2
Group of Institutions, Bhopal, India
 Jawaharlal Nehru Technological University
445 Hyderabad, Kukatpally, Hyderabad, Telangana- 10 8 4
85, India

Centre For Converging Technologies,

446 7 5 4
University of Rajasthan, India

Department of Sci. & Hum., Faculty of

447 Engineering Technology & Research, Isroli- 9 13 9
Afwa, Surat, India

Department of Physics, Sir P.T. Science collage,

448 9 14 10
Surat, India

Assistant Professor, Department of Mechanical

449 Engineering, Selvam College of Technology, 10 5 3
Namakkal-637003l,India.

Asst. Professor K L University, Guntur,,cR.K

450 6 9 9
Engg college, India

University Institute of Engineering &

451 Technology, Panjab University, Chandigarh 5 2 0
160014,India

CEMILAC, Defence R&D Organization,

452 8 6 4
Bangalore -560093 India
 Assistant Professor, Department of Mechanical
453 8 5 5
Engineering, MANIT Bhopal, 462051, India

Department of Metallurgical and Materials

454 Engineering, National Institute of Technology, 9 11 4
Rourkela 769008, India

Department of Physics, GITAM Institute of

455 Technology, GITAM University, 8 6 1
Visakhapatnam 530 045, A.P, India

Atomic Minerals Department For Exploration

456 and Research,WestBlock-VII,Delhi-110 8 4 2
066,India

Department Of Mechanical
457 Engineering,JNTUH College Of Engineering 9 9 6
Hyderabad,Telangana-85,India

Asst. Professor, Department of Mechanical

458 Engineering, University College of 7 5 5
Engineering, Osmania University, Hyderabad

Department of Studies and Research in

Industrial Chemistry, School of Chemical
459 10 4 3
Sciences, Kuvempu University,
Shankaraghatta-577 451, India.
 DepartmentofMechanicalEngineering,Maulana
460 AzadNationalInstituteofTechnology,Bhopal(M. 10 3 1
P.),India

Mechanical Engineering Department, Malaviya

461 National Institute Of Technology, Jaipur- 7 5 4
302017,India

Research Scholar, Mechanical Engineering,

462 13 11 2
NITWarangal-506004, India

Department of Physics, B.H. College, Howly,

463 7 5 3
Assam, 781316, India

Dept of Industrial Engineering & Management,

464 Dr. Ambedkar Institute of Technology, 8 6 2
Mallathahalli, Bangalore-560 056, India

Department of Mechanical Engineering,

University Institute of Engineering and
465 7 5 3
Technology, Panjab University, Chandigarh and
160014,India

Department Of ECT, Gauhati University,

466 7 5 0
Guwahati-781014, Assam, India

School of Technology and Applied Sciences,

467 Pullarikkunnu Campus, Malloossery, 5 3 1
Kottayam, Kerala, India

Department of Mechanical Engineering,

468 National Institute of Technology Warangal, 7 2 2
Telangana. 506004.
 Department of Mechanical Engineering,
469 Institute of Engineering & Technology, GLA 9 7 6
University, Mathura 281406, India

Professor,Department of Mechanical
470 Engineering, MANIT, Bhopal (M.P.)-462003, 10 10 9
India
Research Scholar, Department of Production
471 Engineering, National Institute of 10 9 5
Technology,Trichy, India.

Mechanical Engineering Department,

472 7 4 4
M.A.N.I.T. Bhopal, 462003, India.

Research Scholar, Department of Mechanical

473 Engineering, MANIT, Bhopal (M.P.)-462003, 12 15 6
India

School of Applied Sciences, KIIT University,

474 4 3 0
Bhubaneswar-751024, Odisha, India

Department of Mechanical Engineering, SR

475 5 6 2
Engineering College, Warangal, T.S., India

Department of Mechanical Engineering,Indian

476 School of Mines,Dhanbad 826004,Jharkhand, 10 9 9
India

Department of Mechanical Engineering,I.T.E,R,

477 10 12 4
S.O.A University,Bhubaneswar, Odisha-751030
 Material Science and Metallurgical Engineering
478 Department, Maulana Azad National Institute 6 5 5
of Technology- Bhopal, M.P., India

Department of Mechanical Engineering G L A

479 9 6 5
University Mathura India 281406

Department of Chemical Engineering, Maulana

480 Azad National Institute of Technology, Bhopal, 5 3 2
Madhya Pradesh, India - 462 051

Department of Mechanical Engineering,

481 Hindustan University, Chennai 603103, 8 6 5
INDIA

BITS-Pilani Hyderabad Campus Hyderabad,

482 7 1 1
Telangana, India

Department of Physics, AMET University,

483 7 6 2
Chennai-603 112, India

1Institute for Plasma Research, Gandhinagar,

484 7 1 0
India