Scribd
Upload
263 views

Formwork For Columns

LICO is a lightweight column formwork system that can be assembled and dismantled by hand without the need for a crane. It uses modular panels in heights of 3 meters, 1 meter, and 50 centimeters that can be configured to match required concrete heights. Cross sections from 200x200mm to 600x600mm can be achieved. The low individual weights of the panels allow for cost-effective forming without heavy equipment. Practical details such as captive tie bolts and chamfer strips that attach easily simplify use and lower shuttering times. The high permissible concrete pressure of 80kN/m2 allows for fast concreting cycles.

Uploaded by

Solomon Balemezi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
263 views

Formwork For Columns

LICO is a lightweight column formwork system that can be assembled and dismantled by hand without the need for a crane. It uses modular panels in heights of 3 meters, 1 meter, and 50 centimeters that can be configured to match required concrete heights. Cross sections from 200x200mm to 600x600mm can be achieved. The low individual weights of the panels allow for cost-effective forming without heavy equipment. Practical details such as captive tie bolts and chamfer strips that attach easily simplify use and lower shuttering times. The high permissible concrete pressure of 80kN/m2 allows for fast concreting cycles.

Uploaded by

Solomon Balemezi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

LICO

The lightweight column formwork


for forming by hand
PERI LICO
Crane-independent, exible, inexpensive

LICO, the lightweight column form-


work for cost-effective forming also
without a crane.

The low individual weights of the ele-


ments allow assembly and dismantling
by hand. This means that the formwork
crew is still in a position to effectively
use crane non-availability in a produc-
tive way.

Practical details simplify the use and


lower shuttering times.

The high permissible fresh concrete


pressure of 80 kN/m2 ensures fast con-
creting cycles and thus contributes to a
very economical utilisation of the equip-
ment.
3000
1000
500

Height increments 500 mm Column cross-sections 3.00 m high LICO column


formwork with RSS I
Push-Pull Props for con-
Only three different element heights: Different cross-section combinations
struction of an ofce
3.00 m, 1.00 m and 0.50 m. These allow permit rectangular or square congura- building.
optimal adjustment to the required con- tions from 200 x 200 to 600 x 600 mm
creting heights. in 50 mm increments.

2
Captive column tie bolts
and nuts are permanently
attached to each element.

Eye bolt as load bearing


point for moving as well
as easy and simple exten-
sions.

LICO chamfer strip,


Item no. 111975, is simply
attached to the front side
of the element.

Column cross-sections from 200 x 200 mm to With centrally-positioned ties, cross-sections


600 x 600 mm can be realised both square or up to 600 x 130 mm can be formed. Element
rectangular-shaped in 50 mm increments. connections are carried out using standard
M20 bolts.

Practice-oriented details

Q The LICO captive column tie bolts Q The chamfer strips are easily tted on
and nuts are permanently attached to the elements this saves on time-
the elements. consuming and cost-intensive nailing
Q Eye bolts on all elements serve as of conventional strips.
load bearing points for moving with
the crane as well as for element con-
nections when extending.

You might also like