Scribd
Upload
843 views

Packing Standard

This document provides packing specifications for part number 21C-F5168-30. It specifies that the part weighs 4280 grams and can be packed 2 parts per container. The container dimensions are 463mm x 260mm x 463mm with a volume of 0.056 cubic meters. The packing code for this part is 8AC. The document also provides photos of the packed and unpacked parts as well as packing procedures.

Uploaded by

Sumeet Rathee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
843 views

Packing Standard

This document provides packing specifications for part number 21C-F5168-30. It specifies that the part weighs 4280 grams and can be packed 2 parts per container. The container dimensions are 463mm x 260mm x 463mm with a volume of 0.056 cubic meters. The packing code for this part is 8AC. The document also provides photos of the packed and unpacked parts as well as packing procedures.

Uploaded by

Sumeet Rathee
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

JOHOKU MANUFACTURING PVT LTD

ISO No. CEC:01:F:07

BOP PACKING SPECIFICATION & EVALUATION SHEET


REV. DATE REMARK
0 1 2 11/24/2017 Original
3 4 5
PART NO SUPPLIER NAME SU CODE

21C-F5168-30 Wanfeng aluminum wheels india pvt. Ltd. 304175


PART NAME MODEL USER CODE
FBD-
Wheel, Cast 21CK SJP-
CHE- 9161
Part weight (XX.X) PACKING CAPACITY PACKING MODE DIMENSION (mm) OD Color ( As per IYM Standard)
(Single) in Gms. PER BIN / TROLLEY/ C.BOX Length(mm) Width( ) Height CMT(m3) Trolley : As per IYM Drawing : N/A
Bin : Grey (With Partition) : N/A
4280 2 463 260 463 0.056 C.Box : Brown (With partition flat bottom)
Technical details
PACKING MODE WEIGHT PACKING MODE WEIGHT PART DIMENSION ( mm) Corrugated box Poly/Bubble
(Unladen) in Kgs. ( Laden ) in Kgs. Length(mm) Width() Height CMT(m3) No of ply 5 Gauge
grm
KHALI DABBA BHRA DABBA 461.8 119 461.8 0.025 GSM 0.98
/m3
Thick. 0.080 mm

SELECTION FACTOR FOR PACKING CODE FIRST TWO DIGIT


PACKING CODE
A General Plastic Bin B Mesh Plastic Bin C FoldingPlasticBin E Plastic Corrugated Box

Packing mode CMT(m3) PARTITION A MeshBoxTrolley E RackTrolley F HangerTrolley G Flip Up Trolley


8 A C A Carton 8B Wooden Box C PlasticBag 8E Band

SELECTION FACTOR FOR PACKING CODE THIRD DIGIT- CMT (m3)


SELECTION FACTOR FOR PACKING
A 0.005 or Less G Over 0.035-0.050/Less M Over 0.3-0.5/Less T Over 3.0-4.0/Less
CODE FOURTH DIGIT
B Over 0.005-0.010/Less H Over 0.05-0.07/Less N Over 0.5-1.0/Less W Over 4.0-5.0/Less
C Over 0.010-0.015/Less J Over 0.07-0.10/Less P Over 1.0-1.5/Less X Over 5.0-7.0/Less
E Over 0.015-0.025/Less K Over 0.1-0.2/Less R Over 1.5-2.0/Less Y Over 7.0 PARTITION : C NO PARTITION: S
F Over 0.025-0.035/Less L Over 0.2-0.3/Less S Over 2.0-3.0/Less
Packing photo / sketch - ( Unladen )

Part photo / sketch/ Packing photo / sketch - ( laden ) Packing Procedure displaying photo of each operation

NOTE : 1) OE/SPG supplies to be done as per the approved packing (3C Concept , As per PQAM & Packing Guidelines)
2) If any discrepancy observed while parts receiving, IYM has the authority to reject / send back the material.
3) No printed box or printed polybags should be used for packing.
4) Material shall be delivered to TLI / lineside in this approved packing only with PYMAC Cards on each packaging
5) Similar standard should be adopted for all similar Parts with slight modification as per part dimensions.
6) Empty space should be filled with cushion material.
7) BIN / Trolley must be cleaned by supplier before usage
8) Supplier must maintain the trolley / Bins (for Damages , regular maintenance) as per the agreement with IYM.
For Supplier Use JOHOKU
STORE PURCHASE ME QA

Submitted By: Approved By: Approved By: Approved By: Approved By:
DATE: Date : Date : Date : Date :

You might also like