Optical Network Architectures

1
 Overview of Optical Networks

The network as a cloud of information flows connecting different participants:

Network access to
enterprises, government High-capacity optical fiber
agencies, residential links between cities and major
customers, etc. hubs (e.g. data centers)
Distances ~100 m - 10 km Distances between nodes:
1000-10000 km

Distances between
nodes < 1000 km

The Role of Optical Networks

Optical network segments are categorized with respect to the size of the area they cover:
Long-haul core networks, also known as Wide Area Networks (WAN) or
interchange carrier (IXC) public networks.
Edge/regional/metro networks, also known as Metropolitan Area Network (MAN) or
local exchange carrier (LEC).
Access networks providing peripheral links (last-mile access) to the end-users.
2
 Modulation Formats: Direct Detection

Intensity Modulation Direct Detection (IM/DD)

First optical networks relied only on simple On-Off Keying (OOK) binary formats with data rates of 1, 2.5, 4 and
10 Gbit/s. Both Non-Return-to-Zero (NRZ) and Return-to-Zero (RZ) pulse shaping employed.
Phase Modulation Direct Detection (PM/DD)
The next step was purely phase-modulated Differential Phase Shift Keying (DPSK) and Differential
Quadrature Phase Shift Keying (DQPSK), directly detected using Delay-line Interferometers (DIs).
DPSK has the same bandwidth efficiency as NRZ/RZ-PAM, but is more resistant to fiber transmission non-
linearities.
DQPSK has (in addition) higher bandwidth efficiency (2 bits/symbol), and the rate could be increased without
increasing the bandwidth.
DPSK and DQPSK transponders capable of 10 and 40 Gbit/s were commercialized, and still used today.

3
 Modulation Formats: The Coherent Revolution

Advanced Formats Using Coherent Optical Detection

Coherent reception uses a 90 degree hybrid and local oscillator laser to analyze the received
optical signal into its In-Phase and Quadrature components: We can detect both Amplitude and
Phase modulation at the same time.
An IQ modulator is used to create advanced Quadrature Amplitude Modulation (QAM) formats
with higher bandwidth efficiency.
Digital Signal Processing (DSP) is used to mitigate transmission impairments and detect the
symbols.
While the concept is old (1990s), the processing power did not exist at the time, and coherent
optical systems were not possible: The advent of very high speed digital CMOS electronics in
recent years is what made the coherent revolution possible.
The current commercial standard: 100 Gbit/s Dual-Polarization QPSK (DP-QPSK)

QAM Transmitter QAM Receiver

4
 Modulation Formats: Historical Perspective and
Current Deployment

Telecom operators have deployed 100G (DP-QPSK) channels since ~2010.

The next step for commercial standardization is 400G optical channels, most probably employing
DP-16-QAM (twice the bandwidth efficiency compared to 100G).

Typical deployment scenarios for each segment in current optical networks:

OOK (1, 2.5, 4, 10 Gbit/s) in Access and Metro.
DPSK (10, 40 Gbit/s) and DQPSK (10, 40 Gbit/s) mostly in Metro, legacy equipment still present in Core
networks.
Coherent DP-QPSK (100 Gbit/s) mostly in the Core, with some system vendors providing lower-performance and
lower-cost options targeted for Metro networks
Future optical networks are expected to be all-coherent in the Metro and Core, using higher-order QAM (16-, 32-,
64-QAM).

5
 Network Topologies

The physical network topology that best supports traffic demand generally
varies with the segments (Core, Metro, Access) of the optical networking
structure.
End-to-end optical signal connections (point-to-point or broadcast) are called
lightpaths (or optical channels).
A given connection is associated with Quality of Service (QoS)
requirements (physical or network), which is then related to each individual
lightpath.

Mesh Star
Ring

6
 Network Topologies

Lightpaths differ in lengths and information capacity that is carried along.

Typically:
Core: 40-100 Gbit/s per optical wavelength, > 1000 km
Metro: 1-40 Gbit/s per optical wavelength, < 1000 km
Access: < 1 Gbit/s per optical wavelength, < 10 km

7
 1st Generation of Optical Networks

Optics for:
Transmission (lower BER than copper links)
Capacity
Switching and Network functions Electronics

8
 Towards to 2nd Generation: TDM and WDM

Complementary methods of increasing fiber capacity:

Time Division Multiplexing: Increase the serial bitrate.
Wavelength Division Multiplexing: Increase the number of parallel wavelengths.

High-speed, high-bandwidth
electronic equipment needed
Expensive to build & maintain

Send data in parallel, on the

same optical fiber
Multiple wavelengths using
lower-rate electronic/optical
equipment to achieve higher
throughputs overall

9
 Wavelength Division Multiplexing

WDM technology signaled a real start to optical networking:

Each wavelength within the WDM spectrum could follow a distinct lightpath enabled
routing of optical signals along the network paths.
Amplification of the signals by using the stimulated emission principle.
No optoelectronic conversion (O-E-O) needed.
All-optical networks made possible.
Possible to compensate chromatic dispersion by periodic deployment of special optical
fibers, called dispersion compensating fibers (DCF).
Amplifiers and DCFs could handle multiple wavelengths together.

10
 Wavelength Division Multiplexing

Modern WDM optical networks rely on

using spans between nodes.
These consist of ~70-100 km lengths
of fiber, with amplifiers (EDFAs) and
DCFs.
Total transmission reach in this way
can be several thousand kilometers
(with no O-E-O conversion needed).
Easy upgrades: As more capacity is
needed, simply add more Txs and Rxs
on new wavelengths (low cost, existing
technology with same bandwidth).

11
 Wavelength Division Multiplexing

The result: WDM technology maturity and introduction of several complementary

technologies enabled unprecedented growth in total transmission capacity, but also in
transmission link length.

12
 Coarse WDM

The International Telecommunications Union (ITU) G.694.2 recommendation on Coarse

Wavelength Division Multiplexing (CWDM) for city and access networks:
A fixed grid of 16 channels between 1270 nm and 1610 nm
20 nm spacing between channels (~2500 GHz)

+ Large channel spacing allows the use of cheap components (e.g. low cost lasers).
A lot of bandwidth is wasted (a typical optical channel is 1-100 GHz).

13
 Dense WDM

ITU G.694.1 recommendation on Dense Wavelength Division Multiplexing (DWDM):

A fixed grid of >80 DWDM wavelengths over one pair of fiber
DWDM channel spacing 0.8 nm (100 GHz grid) or 0.4 nm (50 GHz grid)
Distances >1000 kms can be achieved with the use of optical amplifiers

+ Denser packing of channels than CWDM, higher spectral efficiency.

Higher cost.

14
 Wavelength Division Multiplexing

Based on optical power loss of fibers, spectrum ranges have been characterized for
compatibility purposes with light sources, receivers and optical components, including
the optical fiber.
According to the broad absorption minimum, the third window is best suited for
DWDM technology.
For DWDM transmission systems, three optical bands are defined:
The Short Band (S-Band): 1460 to 1530 nm
The Conventional Band (C-Band): 1530 to 1565 nm
The Long Band (L-Band): 1565 to 1625 nm

15
 Wavelength Division Multiplexing

Fixed CWDM & DWDM ITU grids

CWDM is the cheaper alternative, traditionally used in Metro optical

network applications (shorter distances, more links, more transceivers
needed).
DWDM is used for long-distance Core optical networks (in addition to
16 Metro), where higher-performing, more expensive (but fewer) transceivers
are needed.
 DWDM Vs CWDM Summary

Coarse WDM Dense WDM

Low-cost equipment More versatile (more expensive)

Metro Networks Metro and Core Networks

Point-to-point (P2P) topologies P2P, ring, mesh

Up to 16 channels with 20 nm spacing >80 channels with 50 GHz spacing

Up to ~80 km (20 dB attenuation) Reach of several 1000 km

No optical amplification Optical amplification with EDFAs possible

10G wavelengths sometimes not supported 100/400G channels supported

17
 Basic Functional Blocks of a WDM Network (1/2)

The transponder can receive an input optical signal and convert it into the electrical domain, and
vice versa (uses optoelectronic modulators to convert electronic data into optical signals).
The WDM multiplexer/demultiplexer (MUX/DEMUX) combines/separates discrete wavelengths
at the transmitter/receiver sides.
Amplifiers (EDFAs, Raman) are used for pre- (Rx-side), post- (Tx-side), and in-line (in each fiber
span) amplification of the optical signals.

18
 Basic Functional Blocks of a WDM Network (2/2)

Reconfigurable Optical Add Drop Multiplexers (ROADMs) are key components of all-optical
networks.
They perform optical routing by removing or inserting one or more wavelengths propagating along
the fiber, without converting them into electrical signals.
ROADMs are reconfigurable and dynamic multi-degree nodes, with single-wavelength granularity.

19
 Access Optical Networks

Access networks provide connectivity to the end-user customers (residential,

commercial, government/public organizations, laboratories, wireless base stations,
etc.).
These include both wired (copper and optical), as well as wireless technologies:
ADSL, VDSL, GSM, UMTS, LTE, WiFi, WiMAX, etc.
Vast majority of wired access networks in Europe and the US are over copper (e.g.
ADSL), while several Asian countries (United Arab Emirates, South Korea, Hong
Kong, Japan) have high penetration (up to 85% for the UAE) of optical access.

20
 Fiber to the x (FTTx)

Last-mile optical networks are referred to as Fiber to the x (FTTx). For example:
Fiber to the Node (FTTN)
Fiber reaches a street cabinet several kilometers from the customers, with the final connections being copper.
Often used in triple-play services (telephony, internet, TV).
Fiber to the Curb (FTTC)
Fiber reaches a street cabinet close to the customer (<300m). Final connections may be high-bandwidth wired
Ethernet or wireless (WiFi).
Fiber to the Premises (FTTP) - also known as Fiber to the Home (FTTH) and Fiber to the Building (FTTB):
Fiber reaches the boundary of the residential or commercial building. Passive optical networks (PONs) and
point-to-point Ethernet are architectures that deliver triple-play services over FTTH networks directly from an
operator's central office.
Two different architectures: Star (Passive Optical Networks) or Point-to-Point (Active Ethernet).

21
 Star: Passive Optical Networks (PONs)

The Optical Line Terminal (OLT) at the service providers central office (CO) broadcasts data
to several Optical Network Terminals (ONTs) at the customer premises through the passive
fiber network.
All ONTs receive the same broadcast data, selecting the appropriate portion corresponding to the
end-user it is serving.

A
ABCD
ABCD

B
ABCD

22
 Current Standards: TDM-PONs

Gigabit Passive Optical Network (GPON)

TDM architecture, 2.5 Gbit/s downstream, 1.2 Gbit/s upstream
Typically have multiple GPON ports per OLT card, with each card serving more than 100 customers.
Single shared fiber:
Fewer fibers than pointpoint (if splitter deployed in the field).
Splits: Up to 128, but typ. 32 or 64.
Typical reach: 20km with 32 splits, but some vendors provide longer reach.
Typical optical budget 28 dB, but higher budget optics available.

XGPON and XGPON2 (also known as NGPON1)

TDM architecture
XG-PON is asymmetric: 10 Gbit/s downstream and 2.5 Gbit/s upstream
XG-PON2 is symmetric: 10 Gbit/s downstream and 10 Gbit/s upstream

23
 Point-to-Point: Active Ethernet

Dedicated point-to-point connections for each ONT.

1 fiber per customer.

24
 Current Standards: Active Ethernet

Futureproof: Upgrade individual users by changing electronics.

User isolation: Dedicated connection & simpler traffic management.
Potential for simpler and lower cost ONT.
More fiber than GPON.
the GPON splitter at the C.O. to proof their fiber installation.
Reach: 2080 km depending on optics.

25
 PON Vs Active Ethernet

Active Ethernet TDM-PON (GPON, XGPON)

Potential for higher capacity Higher density ONT
(limited only by TRx speed) - More subscribers per platform
- Lower power per subscriber
- Lower cost per subscriber

User isolation (no rogue ONTs Fewer fibers/cables in the central

can steal data) office (and feeder/exchange)
- More subscribers per fiber
- Lower mean time to repair
(MTTR)

Simpler traffic management Prevailing architecture for large

telecom providers
Potential for lower complexity ONT Evolution to WDM-PON standards

26
 Future Standards: TDM/WDM-PON

Why move to WDMPON?

Combines good qualities of TDM and point-to-point: Effectively delivers point-to-point
performance with fiber density comparable to TDMPON.
3240 users per fiber, 1 user per wavelength.
TDM-PON: 10G/32 users = 312 Mbps/user over single fiber
WDM-PON: 1 Gbps per wavelength = 1 Gbps/user over single fiber
Hybrid approaches are also possible, such as an XGPON or GPON per wavelength.

WDM-PON TDM/WDM-PON

Pure WDM Both TDM and WDM

Wavelength selection is done with an AWG, Passive splitting, all wavelengths reach ONTs
and only 1 wavelength reaches each ONT Wavelength selection done at ONTs
27
 Future Standards: NG-PON2

NG-PON2 (currently being specified, expected in 2015)

40 Gbit/s downstream, 10 Gbit/s upstream
Several options: WDM, Ultra-Dense WDM-PON (UDWDM), OFDM, TDM,
TDM/WDM, Hybrid system with 4 x XGPON multiplexing.

28
 The Future: Flexible Networks (1)

Exponential Traffic Growth makes the traditional WDM schemes to

reach its capacity and reach limits.
Demands:
Less rigid (Elastic) Spectrum Specifications (channel spacing <50
GHz AND >100 GHz)
Variety of Modulation Formats (coherent QAM) and rates: 100G,
400G, 1T, etc.
Multicarrier transmission

Super-Channel concept

29
 The Future: Flexible Networks (2)

Flexible DWDM Grid (ITU-T G.694.1) FlexGrid standard

12.5 GHz spectral granularity is able to support variable transmission
rates >100Gb/s

30
 The Future: Flexible Networks (3)

Super-Channel approach to achieve higher bit rates.

Multiple carriers with center frequencies and bandwidths defined by the
Flex-Grid.
More efficient use of the bandwidth, little bandwidth wasted in guard
channels.
Reclaim 25% wasted spectrum from 50 GHz fixed-grid.

31
 The Future: Flexible Networks (4)

Variable-bitrate transponders supporting multiple formats and rates.

Traffic demands of various characteristics (bit rate, reach) can be
handled by the network with a maximization of the spectral efficiency.
E.g. use 100G QPSK for longer reach, switch to 16-/64-QAM for shorter
distances with better SNR.
Respond to changing network conditions by adapting formats.
Maximizes bandwidth efficiency, network utilization lower cost, lower
energy consumption.

32
 Layered Hierarchy of a Network (1)

Networks contain a variety of different functions being performed by different

components from different vendors all interworking together.
In order to simplify our view of the network, it is desirable to break up the functions of
the network into different layers.

33 NE: Network Element

 Layered Hierarchy of a Network (2)

The classic OSI layered hierarchy

MPLS IP

Ethernet
SONET
SDH
OTN

34
 Optical Layer in Layered Hierarchy (1)

The optical layer is a server layer that provides services to other client layers.
Client layers residing above a second-generation optical network layer include:
IP
Ethernet
SONET/SDH
OTN
other possible protocols (e.g. Fiber Channel)

35
 Optical Layer in Layered Hierarchy (2)

The transmission rates standards of the higher layers affected the transmission
standards of the optical layer

36
 Optical Transport Network (OTN)

The Optical Transport Network (OTN), a.k.a. G.709, was designed to transport
data packet traffic such as IP and Ethernet over fiber optics, as well as legacy traffic
and in particular SONET/SDH.
It is called the digital wrapper technology because it wraps any client signal in
overhead information for operations, administration, and management.
Capabilities of:
FEC
Management
Protocol Transparency
Asynchronous Timing

OTN hierarchy

37