Scribd
Upload
51 views

Applications Manual: Hyundai Anti Theft System

This document provides an overview of Hyundai's anti-theft immobilizer systems and instructions for programming keys. There are three systems - black key, blue key, and green key - with slightly different programming procedures. The document describes the key programming process for each system, which involves entering a security code before adding keys one by one. It also covers clearing all keys and activating a limp home mode to start the vehicle once if needed for transport.

Uploaded by

flavio j chambi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
51 views

Applications Manual: Hyundai Anti Theft System

This document provides an overview of Hyundai's anti-theft immobilizer systems and instructions for programming keys. There are three systems - black key, blue key, and green key - with slightly different programming procedures. The document describes the key programming process for each system, which involves entering a security code before adding keys one by one. It also covers clearing all keys and activating a limp home mode to start the vehicle once if needed for transport.

Uploaded by

flavio j chambi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

APPLICATIONS MANUAL

HYUNDAI ANTI THEFT SYSTEM

PAGE
CONTENTS

APPLICATIONS 1.1

CONNECTOR LOCATIONS 2.1

GENERAL OPERATION 3.1

SPECIAL FUNCTIONS 4.1

APM116 Version 1.1 04/03


APPLICATIONS

MODEL CABLE
ATOS ADC110
ACCENT ADC110
EXCEL ADC110
S COUPE ADC110
MATRIX ADC110
ELANTRA ADC110
HD COUPE ADC110
SONATA ADC110
XG ADC110
MARCIA ADC110
CENTENNIAL ADC110
GRANDEUR ADC110
H-100 ADC110
H-100 TRUCK ADC110
H-1 ADC110
H-1 TRUCK ADC110
SANTA FE ADC110
TRAJET XG ADC110
TAXI ADC110
TERRACAN ADC110
GALLOPER ADC110
SANTAMO ADC110

1.1
CONNECTOR LOCATIONS

COUPE

GRANDEUR

2.1
CONNECTOR LOCATIONS

SONATA

SANTA FE

2.2
CONNECTOR LOCATIONS

TERRACAN

ELANTRA
ACCENT

2.3
CONNECTOR LOCATIONS

TRAJET

2.4
GENERAL OPERATION

INTRODUCTION

The Hyundai Immobiliser system called the SMARTRA manufactured by Bosch consists
of the SMARTRA ECU which has its own CPU which controls the vehicles immobiliser in
conjunction with the engine management ECU.

There are 3 basic systems used on the range of vehicles :-

SYSTEM 1

BLACK key systemTEXTON Read only key head

Minimum keys required for programming 1.

Maximum keys programmed 5.

SYSTEM 2

BLUE key systemENCRYPT key system

Minimum keys required for programming 1.

Maximum keys programmed 4.

SYSTEM 3

GREEN key systemSHINCHANG ENCRYPT

Minimum keys required for programming 1.

Maximum keys programmed 4.

PIN CODE ENTRY

On earlier vehicles the pin code is a 4 digit code, which is standard and set to 2345.

On later systems the pin code is a 6 digit code, and available from the dealer.

3.1
GENERAL OPERATION

KEY PROGRAMMING (WITH MASTER KEY)

Elantra, Lantra, Coupe, S Coupe, Sonata, Sonica, Accent 1996 +


Atos, Starex 1998 +
Galloper 1999 +

Procedure

1. Insert Master Key in ignition.


2. Switch Ignition OFF to ON 5 times.
3. Remove Master key.
4. Insert NEW key into IGNITION and TURN IGNITION ON.
5. Turn ignition OFF and remove key.
6. Repeat 4 to 5 for all additional keys and any existing keys.

NOTE : IF AN EXISTING KEY IS NOT REGISTERED AT THIS STAGE THEN IT WILL


BE DELETED FROM THE SYSTEM.

NOTE 2 : THE PROCEDURE FROM 3 TO 5 MUST BE COMPLETED WITHIN 15 SEC-


ONDS.

3.2
SPECIAL FUNCTIONS

KEY PROGRAMMINGSYSTEM 1

DIAGNOSTIC MENU

ECU IDENTIFICATION From the main DIAGNOSTIC MENU se-


FAULT CODES lect the SPECIAL FUNCTIONS.
SPECIAL FUNCTIONS

PRESS ENTER KEY

DIAGNOSTIC MENU

> PROGRAM KEYS Select PROGRAM KEYS.


> CLEAR KEYS
> KEYS PROGRAMMED

PRESS ENTER KEY

Enter security code.

NOTE : This code is normally 2345


SECURITY CODE
NOTE 2 : If this is incorrect then the dealer
____ who supplied the vehicle may have
changed it. If this is so, please contact the
dealer.

SECURITY CODE

2345

IS THIS CORRECT
OK = ENTER CLEAR =BACK

4.1
SPECIAL FUNCTIONS

KEY PROGRAMMINGSYSTEM 1 (Contd)

If key programming is successful, then


procedure complete is displayed.
PROCEDURE COMPLETE
NOTE : REPEAT PROCEDURE FOR ALL
ADDITIONAL KEYS REQUIRED.

KEY CLEARINGSYSTEM 1

DIAGNOSTIC MENU

Select CLEAR KEYS from SPECIAL


> PROGRAM KEYS FUNCTIONS menu.
> CLEAR KEYS
> KEYS PROGRAMMED

PRESS ENTER KEY

Enter security code.

SECURITY CODE NOTE : This code is normally 2345

NOTE 2 : If this is incorrect then the dealer


____
who supplied the vehicle may have
changed it. If this is so, please contact the
dealer.

SECURITY CODE

2345

IS THIS CORRECT
OK = ENTER CLEAR =BACK

4.2
SPECIAL FUNCTIONS

KEY CLEARINGSYSTEM 1 (Contd)

4.3
SPECIAL FUNCTIONS

KEY PROGRAMMINGSYSTEM 2

DIAGNOSTIC MENU

ECU IDENTIFICATION From the main DIAGNOSTIC MENU se-


FAULT CODES lect the SPECIAL FUNCTIONS.
SPECIAL FUNCTIONS

PRESS ENTER KEY

DIAGNOSTIC MENU

> PROGRAM KEYS Select PROGRAM KEYS.


> KEYS PROGRAMMED
> LIMP HOME MODE

PRESS ENTER KEY

SECURITY CODE
Enter 6 digit security code.

______

SECURITY CODE
NOTE : The 6 digit code is available from
the vehicle dealer.
123456

IS THIS CORRECT
OK = ENTER CLEAR =BACK

4.4
SPECIAL FUNCTIONS

KEY PROGRAMMINGSYSTEM 2

SWITCH IGNITION ON Switch IGNITION ON and press the EN-


TER key.
AND THEN PRESS ENTER

PROGRAM KEYS The key in the ignition will be added to the


BACK TO EXIT system.
ENTER TO PROGRAM To program additional keys press the EN-
NEXT KEY TER key, or BACK to exit programming.

If ENTER is pressed then additional keys


PROGRAM KEYS can be programmed.
INSERT NEXT KEY
& THEN PRESS ENTER Repeat for all additional keys.

PROGRAM KEYS If BACK is pressed then and all keys have


been programmed the PROCEDURE
PROCEDURE COMPLETE COMPLETE is displayed.

4.5
SPECIAL FUNCTIONS

LIMP HOME MODESYSTEM 2

DIAGNOSTIC MENU

ECU IDENTIFICATION From the main DIAGNOSTIC MENU se-


FAULT CODES lect the SPECIAL FUNCTIONS.
SPECIAL FUNCTIONS

PRESS ENTER KEY

DIAGNOSTIC MENU

> PROGRAM KEYS Select LIMP HOME MODE.


> CLEAR KEYS
> LIMP HOME MODE Insert security code 2345 and this will en-
able one start to get the vehicle to a dealer
or workshop if further testing is required.

PRESS ENTER KEY

4.6

You might also like