Scribd
Upload
1K views2 pages

DIN GS-C25 Cast Carbon Steel Chemical and Mechanical Properties

DIN GS-C25 Cast Carbon Steel Chemical and Mechanical Properties

Uploaded by

Muhammad Ridwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
1K views2 pages

DIN GS-C25 Cast Carbon Steel Chemical and Mechanical Properties

DIN GS-C25 Cast Carbon Steel Chemical and Mechanical Properties

Uploaded by

Muhammad Ridwan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
zanigorr (6S-025 Vahe,GS-625 anges GS-25 Pipe Fitting 6S-C25 Restucer GS-25 Angle Bar GS.C25 Pipe Pipe Teo 165-025 rtange Super Doplx Stainless Steel Fangs | Stainless Stal Pips tings | Duplex Stainess Staal Pipes | Stainless Stel Bars a aang “henson cous GS-C25 cos GS-C25 angle bars, GS-C25 flanges, Pipe Filing, Sel Pipe, Heat Exchanger and Reducer, Gasket Tee, Pipe Fang, eacemniets prodctonsecieaton S ENQURY: 6S-c25 g STMC25000 018023 930-0.60 050-080 0.070 ots: 230 6°” 6 octane Propet geo ‘ Density. 6 sone on 190-210 B 6 ps: yaang.comidata-conerMould-stooigs-c25 ind us zaniaor7 (68.025 Vahe,GS-625 anges GS-25 Pipe Fitting 6S-C2S Restucer.6S-C25 Angle Bar GS.C25 Pipe,Pipe Teo Saas sal Hes ISLAG, rola ets sel Tole Ba bearing se Spr sal Absa Carton ccelrtsavce eran of rte, watering of chase! ne pee ‘Mold seelis used to make Die, ging and molding mold mol steel. The mold the main processing ‘ook for mnuicturng parts in machinery manudccurng, radio instrnents, motors, appliances and other industrial sectors. The qualty of the mold divecty aets the quality of the pressure process, the accuracy of product ysl and production costs, quality and service it of the mold in adlton to relying onthe structural design and machining accuracy, mainly due to the impact of moll materials and heat treatment. Steel mold _clessfcation Condions of service of the United States according to the mold the mold ste! nto four categories, lted atthe American Society for Meta, Tool Steel Commitee: old work die steel hot work die ‘sel and plastic mol seeks, plastic mold stccs four major categories. Which, cold work dis steel and the separation ofthe 12 subclasses to 9 subclasses ofhot work die stcl, plastic mold steel. Liu Die Steel2 subcategories, plastic mol steel categories, Each subclss of the selection depends on three main fctors:@ the complexity ofthe size and shape # raw materials # dusbiltyrequiremesss or design Ii. The stel process performance Workabily- Therm processing performance, refers to thermoplstc processing temperature range; hot work die steel - Cold performance, refers to cut, riding, polishing, cold drawing processig performance. Hatdenabity and Iardenabity Hardesabiliy depends onthe chemical composition ‘ofstel and the original organization ofthe slate before quenching the hardenabity mainly depends on the ‘earbon content in steel For most ofthe cold work dc steel, bardenabiliy is ofen one ofthe main ‘considerations. For bot work di steel and piste mold steel, the general size ofthe mol, especially in the rmanfictre of ange mol, is hardenailiy is more important, In addin, the complex shape prone to eat ‘restment distortion of various molds in order to reduce quenching distortion, offen as mich as possible wing less cooling capacity of quenching medi, such as air-cooled, cok ior salt bath cooling, in order to get the _requied tardness and bardened ayer depth, we need to adopt the bardensbity good dc steel. Quenching ‘temperature end beat teatmeet distortion In onder to Scitate the production, mold steel quenching ‘temperature range as possible to relax some, especialy when mold heated by te fare hardening. dieu to accurately measure and control temperature, mold stel quenching temperature range wide. Mold during heat treatment, especialy inthe quenching process, to produce changes in ste, shape warping, distortion, ee, in ‘order to ensure the quali ofthe mol, require heat ratment of see] mld deformation, in particu, &

You might also like